summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/aspeed/pinctrl-aspeed.h
AgeCommit message (Collapse)AuthorFilesLines
2019-12-13pinctrl: aspeed-g6: Add AST2600 pinconf supportJohnny Huang1-0/+7
The AST2600 pinconf is a little different from previous generations of ASPEED BMC SoCs in terms of architecture. The pull-down setting is per-pin setting now, and drive-strength support 4 kind of value (e.g. 4ma, 8ma, 12ma, 16ma). Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Trim unused pinctrl register macros] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-8-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13pinctrl: aspeed: Use masks to describe pinconf bitfieldsJohnny Huang1-3/+4
Since some of the AST2600 pinconf setting are not just single bit, modified aspeed_pin_config @bit to @mask and add @mask to aspeed_pin_config_map to support configuring multiple bits. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Tweak commit message] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-7-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13pinctrl: aspeed: Move aspeed_pin_config_map to separate source fileJohnny Huang1-0/+19
The AST2600 pinconf differs from the 2400 and 2500, aspeed_pin_config_map should define separately, and add @confmaps and @nconfmaps to aspeed_pinctrl_data structure for that change. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-6-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13pinctrl: aspeed: Add ASPEED_SB_PINCONF() helperJohnny Huang1-0/+7
This helper macro is for declaring single bit (SB) mask pinconf, and is used to prepare for modifying aspeed_pin_config structure, the aspeed_pin_config structure @bit variable will be modified to @mask. This case is common in the AST2400/AST2500 which the mask is a single bit. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-5-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-13Merge tag 'pinctrl-v5.3-1' of ↵Linus Torvalds1-533/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ...
2019-07-10pinctrl: aspeed: Strip moved macros and structs from private headerAndrew Jeffery1-498/+0
Further cleanup from the SPDX fixup fallout for the recent ASPEED series. aspeed_g4_defconfig, aspeed_g5_defconfig and multi_v5_defconfig now compile. Smoke tested the g4 and g5 kernels under QEMU's palmetto-bmc and romulus-bmc machines respectively. Fixes: 35d8510ea3ad ("pinctrl: aspeed: Fix missed include") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190710032216.4088-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-10pinctrl: aspeed: Fix missed includeLinus Walleij1-0/+2
Some SPDX churn made my fixes drop an important include from the Aspeed pinctrl header. Fix it up. Cc: Andrew Jeffery <andrew@aj.id.au> Reported-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03pinctrl: aspeed: Split out pinmux from general pinctrlAndrew Jeffery1-35/+8
ASPEED have completely rearranged the System Control Unit register layout with the AST2600. The existing code took advantage of the fact that the AST2400 and AST2500 had layouts that were similar enough to have little impact on the pinmux infrastructure (though there is a wart with read-modify-write vs write-1-clear semantics of the hardware strapping registers between the two). Given that any similarity has been thrown out with the AST2600, separate out the function applying an expression state to be driver-specific. With it, extract out the pinmux macro jungle to its own header and implementation so the pieces can be composed without dependency cycles. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-8-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03pinctrl: aspeed: Correct comment that is no longer trueAndrew Jeffery1-2/+1
We have handled the GFX register case for quite some time now. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-6-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-22pinctrl: aspeed: Fix ast2500 strap register write logicYong Li1-0/+1
On AST2500, the hardware strap register(SCU70) only accepts write ‘1’, to clear it to ‘0’, must set bits(write ‘1’) to SCU7C Signed-off-by: Yong Li <sdliyong@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24pinctrl: aspeed: Add core pinconf supportAndrew Jeffery1-0/+28
Several pinconf parameters have a fairly straight-forward mapping onto the Aspeed pin controller. These include management of pull-down bias, drive-strength, and some debounce configuration. Pin biasing largely is managed on a per-GPIO-bank basis, aside from the ADC and RMII/RGMII pins. As the bias configuration for each pin in a bank maps onto a single per-bank bit, configuration tables will be introduced to describe the ranges of pins and the supported pinconf parameter. The use of tables also helps with the sparse support of pinconf properties, and the fact that not all GPIO banks support biasing or drive-strength configuration. Further, as the pin controller uses a consistent approach for bias and drive strength configuration at the register level, a second table is defined for looking up the the bit-state required to enable or query the provided configuration. Testing for pinctrl-aspeed-g4 was performed on an OpenPOWER Palmetto system, and pinctrl-aspeed-g5 on an AST2500EVB as well as under QEMU. The test method was to set the appropriate bits via devmem and verify the result through the controller's pinconf-pins debugfs file. This simultaneously validates the get() path and half of the set() path. The remainder of the set() path was validated by configuring a handful of pins via the devicetree with the supported pinconf properties and verifying the appropriate registers were touched. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-28pinctrl: aspeed-g5: Add mux configuration for all pinsAndrew Jeffery1-0/+1
The patch introducing the g5 pinctrl driver implemented a smattering of pins to flesh out the implementation of the core and provide bare-bones support for some OpenPOWER platforms and the AST2500 evaluation board. Now, update the bindings document to reflect the complete functionality and implement the necessary pin configuration tables in the driver. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-27pinctrl: aspeed: Read and write bits in LPC and GFX controllersAndrew Jeffery1-9/+23
The System Control Unit IP block in the Aspeed SoCs is typically where the pinmux configuration is found, but not always. A number of pins depend on state in one of LPC Host Control (LHC) or SoC Display Controller (GFX) IP blocks, so the Aspeed pinmux drivers should have the means to adjust these as necessary. We use syscon to cast a regmap over the GFX and LPC blocks, which is used as an arbitration layer between the relevant driver and the pinctrl subsystem. The regmaps are then exposed to the SoC-specific pinctrl drivers by phandles in the devicetree, and are selected during a mux request by querying a new 'ip' member in struct aspeed_sig_desc. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07pinctrl: Add core support for Aspeed SoCsAndrew Jeffery1-0/+569
The Aspeed SoCs typically provide more than 200 pins for GPIO and other functions. The signal enabled on a pin is determined on a priority basis, where a given pin can provide a number of different signal types. In addition to the priority levels, the Aspeed pin controllers describe the signal active on a pin by compound logical expressions involving multiple operators, registers and bits. Some difficulty arises as a pin's function bit masks for each priority level are frequently not the same (i.e. we cannot just flip a bit to change from a high to low priority signal), or even in the same register(s). Some configuration bits affect multiple pins, while in other cases the signals for a bus must each be enabled individually. Together, these features give rise to some complexity in the implementation. A more complete description of the complexities is provided in the associated header file. The patch doesn't implement pinctrl/pinmux/pinconf for any particular Aspeed SoC, rather it adds the framework for defining pinmux configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 02:07:23 +0000