summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2019-05-28Merge tag 'pinctrl-v5.2-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "The commits that stand out are the Intel fixes that arrived during the merge window and I got relayed by pull request from Andy. Apart from that a minor Kconfig noise. - Interrupt clearing fix for the Intel pin controllers affecting touchpads on some laptops. - Compile Kconfig fix for the STMFX expander pin controller" * tag 'pinctrl-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: stmfx: Fix compile issue when CONFIG_OF_GPIO is not defined pinctrl: intel: Clear interrupt status in mask/unmask callback pinctrl: intel: Use GENMASK() consistently
2019-05-24pinctrl: stmfx: Fix compile issue when CONFIG_OF_GPIO is not definedAmelie Delaunay1-1/+1
When CONFIG_GPIO_OF is not defined, struct gpio_chip 'of_node' member does not exist: drivers/pinctrl/pinctrl-stmfx.c: In function 'stmfx_pinctrl_probe': drivers/pinctrl/pinctrl-stmfx.c:652:17: error: 'struct gpio_chip' has no member named 'of_node' pctl->gpio_chip.of_node = np; Fixes: 1490d9f841b1 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14Merge tag 'mfd-next-5.2' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Document (kerneldoc) core mfd_add_devices() API New Drivers: - Altera SOCFPGA System Manager - Maxim MAX77650/77651 PMIC - Maxim MAX77663 PMIC - ST Multi-Function eXpander (STMFX) New Device Support: - LEDs support in Intel Cherry Trail Whiskey Cove PMIC - RTC support in SAMSUNG Electronics S2MPA01 PMIC - SAM9X60 support in Atmel HLCDC (High-end LCD Controller) - USB X-Powers AXP 8xx PMICs - Integrated Sensor Hub (ISH) in ChromeOS EC - USB PD Logger in ChromeOS EC - AXP223 in X-Powers AXP series PMICs - Power Supply in X-Powers AXP 803 PMICs - Comet Lake in Intel Low Power Subsystem - Fingerprint MCU in ChromeOS EC - Touchpad MCU in ChromeOS EC - Move TI LM3532 support to LED New Functionality: - max77650, max77620: Add/extend DT support - max77620 power-off - syscon clocking - croc_ec host sleep event Fix-ups: - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs - Remove unused functionality; rk808, da9063-* - SPDX conversion; da9063-*, atmel-*, - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr - Fix-up DT bindings; ti-lmu, cirrus,lochnagar - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb Bug Fixes: - Fix incorrect defined values; max77620, da9063 - Fix device initialisation; twl6040 - Reset device on init; intel-lpss - Fix build warnings when !OF; sun6i-prcm - Register OF match tables; tps65912-spi - Fix DMI matching; intel_quark_i2c_gpio" * tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: Use dev_get_drvdata() directly mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device mfd: cros_ec: Instantiate properly CrOS FP MCU device mfd: cros_ec: Update the EC feature codes mfd: intel-lpss: Add Intel Comet Lake PCI IDs mfd: lochnagar: Add links to binding docs for sound and hwmon mfd: ab8500-debugfs: Fix a typo ("deubgfs") mfd: imx6sx: Add MQS register definition for iomuxc gpr dt-bindings: mfd: LMU: Fix lm3632 dt binding example mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L mfd: tps65912-spi: Add missing of table registration mfd: axp20x: Add USB power supply mfd cell to AXP803 mfd: sun6i-prcm: Fix build warning for non-OF configurations mfd: intel-lpss: Set the device in reset state when init platform/chrome: Add support for v1 of host sleep event mfd: cros_ec: Add host_sleep_event_v1 command mfd: cros_ec: Instantiate the CrOS USB PD logger driver mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable ...
2019-05-10pinctrl: Kconfig: Fix STMFX GPIO expander Pinctrl/GPIO driver dependenciesAmelie Delaunay1-0/+2
module_i2c_driver and pinconf_generic_dt_node_to_map_pin are undeclared if CONFIG_I2C and CONFIG_OF are not enabled. Fixes: 1490d9f841b1 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-10pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driverAmelie Delaunay1-0/+12
This patch adds pinctrl/GPIO driver for STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander. STMFX is an I2C slave controller, offering up to 24 GPIOs. The driver relies on generic pin config interface to configure the GPIOs. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-03pinctrl: Rework Kconfig dependency for BM1880 pinctrl driverManivannan Sadhasivam1-1/+2
Make the BM1880 SoC pinctrl driver depend on COMPILE_TEST to get compiler test coverage and also select this driver by default for ARCH_BITMAIN platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-03pinctrl: Add pinctrl support for BM1880 SoCManivannan Sadhasivam1-0/+7
Add pinctrl support for Bitmain BM1880 SoC. The driver only handles pinmuxing as the SoC is not capable of handling pinconf. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-22pinctrl: ocelot: Add dependency on HAS_IOMEMLinus Walleij1-0/+1
As usual the build fails on UM Linux because that thing does not have IOMEM. Depend on HAS_IOMEM solves the build problem. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-21pinctrl: ocelot: add MSCC Jaguar2 supportAlexandre Belloni1-3/+2
Jaguar2 has the same register layout as Ocelot but it has 64 pins, meaning that there are 2 registers instead of one. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-23pinctrl: Add RZ/A2 pin and gpio controllerChris Brandt1-0/+11
Adds support for the pin and gpio controller found in R7S9210 (RZ/A2) SoCs. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-10-10Merge tag 'sh-pfc-for-v4.20-tag3' of ↵Linus Walleij1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.20 (take three) - Add support for the new RZ/N1D (R9A06G032) and RZ/N1S (R9A06G033) SoCs, - Add INTC-EX pin groups on R-Car E3.
2018-10-02pinctrl: renesas: Renesas RZ/N1 pinctrl driverPhil Edworthy1-0/+10
This provides a pinctrl driver for the Renesas RZ/N1 device family. Based on a patch originally written by Michel Pollet at Renesas. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-08-29Merge branch 'ib-ingenic' into develLinus Walleij1-2/+4
2018-08-29pinctrl: ingenic: Drop dependency on MACH_INGENICPaul Cercueil1-2/+2
Depending on MACH_INGENIC prevent us from creating a generic kernel that works on more than one MIPS board. Instead, we just depend on MIPS being set. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29pinctrl: ingenic: Merge GPIO functionalityPaul Cercueil1-0/+2
Merge the code of the gpio-ingenic driver into the pinctrl-ingenic driver. The reason behind this, is that the same hardware block handles both pin config / muxing and GPIO. ingenic_gpio_probe() have been marked as __init, but for the most part, the code is the exact same as what it was in the gpio-ingenic driver. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driverTomer Maimon1-0/+1
Add Nuvoton BMC NPCM750/730/715/705 Pinmux and GPIO controller driver. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> [Add back select GPIO_GENERIC] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-20Merge tag 'mfd-next-4.19' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver - Add ChromeOS EC CEC driver - Add ROHM BD71837 PMIC driver New Device Support: - Add support for Dialog Semi DA9063L PMIC variant to DA9063 - Add support for Intel Ice Lake to Intel-PLSS-PCI - Add support for X-Powers AXP806 to AXP20x New Functionality: - Add support for USB Charging to the ChromeOS Embedded Controller - Add support for HDMI CEC to the ChromeOS Embedded Controller - Add support for HDMI CEC to Intel HDMI - Add support for accessory detection to Madera devices - Allow individual pins to be configured via DT' wlf,csnaddr-pd - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp Fix-upsL - Trivial renaming/spelling fixes; cros_ec, da9063-* - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc - Transition to helper macros/functions; da9063-* - Constify; kempld-core - Improve error path/messages; wm8994-core - Disable IRQs locally instead of relying on USB subsystem; dln2 - Remove unused code; rave-sp - New exports; sec-core Bug Fixes: - Fix possible false I2C transaction error; arizona-core - Fix declared memory area size; hi655x-pmic - Fix checksum type; rave-sp - Fix incorrect default serial port configuration: rave-sp - Fix incorrect coherent DMA mask for sub-devices; sm501" * tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: madera: Add register definitions for accessory detect mfd: sm501: Set coherent_dma_mask when creating subdevices mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC mfd: bd71837: Core driver for ROHM BD71837 PMIC media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC mfd: sec-core: Export OF module alias table mfd: as3722: Disable auto-power-on when AC OK mfd: axp20x: Support AXP806 in I2C mode mfd: axp20x: Add self-working mode support for AXP806 dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts mfd: wm8994: Allow to configure Speaker Mode Pullup from dts mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it mfd: rave-sp: Add legacy watchdog ping command translation mfd: rave-sp: Add legacy EEPROM access command translation mfd: rave-sp: Initialize flow control and parity of the port mfd: rave-sp: Fix incorrectly specified checksum type mfd: rave-sp: Remove unused defines mfd: hi655x: Fix regmap area declared size for hi655x mfd: ti_am335x_tscadc: Fix struct clk memory leak ...
2018-08-06pinctrl: ocelot: add support for interrupt controllerQuentin Schulz1-0/+1
This GPIO controller can serve as an interrupt controller as well on the GPIOs it handles. An interrupt is generated whenever a GPIO line changes and the interrupt for this GPIO line is enabled. This means that both the changes from low to high and high to low generate an interrupt. For some use cases, it makes sense to ignore the high to low change and not generate an interrupt. Such a use case is a line that is hold in a level high/low manner until the event holding the line gets acked. This can be achieved by making sure the interrupt on the GPIO controller side gets acked and masked only after the line gets hold in its default state, this is what's done with the fasteoi functions. Only IRQ_TYPE_EDGE_BOTH and IRQ_TYPE_LEVEL_HIGH are supported for now. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-27Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', ↵Lee Jones1-0/+1
'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-merged Immutable branch (mfd, chrome) due for the v4.19 window Immutable Branch which moves the cros_ec_i2c and cros_ec_spi transport drivers from mfd to platform/chrome. Changes in arm are a simple rename in defconfigs. Change in input is a rename in help text.
2018-06-18pinctrl: mcp23s08: Kconfig: update to reflect supported featuresJan Kundrát1-4/+4
Commit d8f4494e70ae removed comments which described this limitation. The code supported interrupts even before. Also add some spacing so that the chip IDs are a bit more readable. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Reviewed-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-05pinctrl: madera: Add driver for Cirrus Logic Madera codecsRichard Fitzgerald1-0/+1
These codecs have a variable number of I/O lines each of which is individually selectable to a wide range of possible functions. The functionality is slightly different from the traditional muxed GPIO since most of the functions can be mapped to any pin (and even the same function to multiple pins). Most pins have a dedicated "alternate" function that is only available on that pin. The alternate functions are usually a group of signals, though it is not always necessary to enable the full group, depending on the alternate function and how it is to be used. The mapping between alternate functions and GPIO pins varies between codecs depending on the number of alternate functions and available pins. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-02pinctrl: actions: Add Actions S900 pinctrl driverManivannan Sadhasivam1-0/+1
Add pinctrl driver for Actions Semi S900 SoC. The driver supports pinctrl, pinmux and pinconf functionalities through a range of registers common to both gpio driver and pinctrl driver. Pinmux functionality is available only for the pin groups while the pinconf functionality is available for both pin groups and individual pins. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-03Merge tag 'pinctrl-v4.17-1' of ↵Linus Torvalds1-12/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk updates from Linus Walleij: "New drivers: - Qualcomm SDM845: this is their new flagship SoC platform which seems to be targeted at premium mobile handsets. - Renesas R-Car M3-N SoC. - Renesas R8A77980 SoC. - NXP (ex Freescale) i.MX 6SLL SoC. - Mediatek MT2712 SoC. - Allwinner H6 SoC. Improvements: - Uniphier adds a few new functions and pins. - Renesas refactorings and additional pin definitions. - Improved pin groups for Axis Artpec6. Cleanup: - Drop the TZ1090 drivers. This platform is no longer maintained and is being deleted. - Drop ST-Ericsson U8540/U9540 support as this was never productified. - Overall minor fixes and janitorial" * tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: uniphier: add UART hardware flow control pin-mux settings pinctrl: sunxi: add support for the Allwinner H6 main pin controller pinctrl: sunxi: change irq_bank_base to irq_bank_map pinctrl: sunxi: introduce IRQ bank conversion function pinctrl: sunxi: refactor irq related register function to have desc pinctrl: msm8998: Remove owner assignment from platform_driver pinctrl: uniphier: divide I2S and S/PDIF audio out pin-mux group pinctrl: uniphier: add PXs2 Audio in/out pin-mux settings pinctrl/amd: poll InterruptEnable bits in enable_irq pinctrl: ocelot: fix gpio direction pinctrl: mtk: fix check warnings. pintcrl: mtk: support bias-disable of generic and special pins simultaneously pinctrl: add mt2712 pinctrl driver pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0 pinctrl: imx: Add pinctrl driver support for imx6sll dt-bindings: imx: update pinctrl doc for imx6sll pinctrl: intel: Implement intel_gpio_get_direction callback pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency pinctrl: mediatek: mtk-common: use true and false for boolean values pinctrl: sunxi: always look for apb block ...
2018-03-26pinctrl: remove adi2/blackfin driversArnd Bergmann1-19/+0
The blackfin architecture is getting removed, so these are now obsolete. Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-01pinctrl: Drop TZ1090 driversJames Hogan1-12/+0
Now that arch/metag/ has been removed, along with TZ1090 SoC support, remove the TZ1090 pinctrl drivers. They are of no value without the architecture and SoC platform code. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: linux-metag@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09pinctrl: Add Microsemi Ocelot SoC driverAlexandre Belloni1-0/+11
The Microsemi Ocelot SoC has a few pins that can be used as GPIOs or take multiple other functions. Add a driver for the pinmuxing and the GPIOs. There is currently no support for interrupts. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20pinctrl: axp209: add missing Kconfig dependenciesQuentin Schulz1-0/+4
This fixes some compilation issues. GENERIC_PINCONF and OF at least for pinconf_generic_dt_*, PINMUX at least for pinmux_ops and GPIOLIB for at least gpio_chip. Fixes: 23f75d7dfa92 ("pinctrl: axp209: add pinctrl features") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-07pinctrl: move gpio-axp209 to pinctrlQuentin Schulz1-0/+10
To prepare the driver for the upcoming pinctrl features, move the GPIO driver AXP209 from GPIO to pinctrl subsystem. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-16Merge tag 'pinctrl-v4.15-1' of ↵Linus Torvalds1-18/+14
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
2017-11-13pinctrl: Add some depends on HAS_IOMEMLinus Walleij1-0/+2
Some compilation fallout from UM Linux (which does not have IOMEM) makes it necessary to depend on HAS_IOMEM for drivers that doesn't have other factors restricting their selection. Cc: Phil Reid <preid@electromag.com.au> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reported-by: R. Daneel Olivaw <kbuild-all@01.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08pinctrl: gemini: Use generic DT parserLinus Walleij1-0/+1
We can just use the generic Device Tree parser code in this driver and save some code. Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-19pinctrl: adi2: Fix Kconfig build problemLinus Walleij1-1/+2
The build robot is complaining on Blackfin: drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup': >> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing pointer to incomplete type 'struct gpio_port_t' writew(readw(&regs->port_fer) & ~BIT(offset), ^~ drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq': >> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing pointer to incomplete type 'struct bfin_pint_regs' if (readl(&regs->invert_set) & pintbit) ^~ It seems the driver need to include <asm/gpio.h> and <asm/irq.h> to compile. The Blackfin architecture was re-defining the Kconfig PINCTRL symbol which is not OK, so replaced this with PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2 just like most arches do. Further, the old GPIO driver symbol GPIO_ADI was possible to select at the same time as selecting PINCTRL. This was not working because the arch-local <asm/gpio.h> header contains an explicit #ifndef PINCTRL clause making compilation break if you combine them. The same is true for DEBUG_MMRS. Make sure the ADI2 pinctrl driver is not selected at the same time as the old GPIO implementation. (This should be converted to use gpiolib or pincontrol and move to drivers/...) Also make sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at the same time as the new PINCTRL implementation, and only make PINCTRL_ADI2 selectable for the Blackfin families that actually have it. This way it is still possible to add e.g. I2C-based pin control expanders on the Blackfin. Cc: Steven Miao <realmz6@gmail.com> Cc: Huanhuan Feng <huanhuan.feng@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-16pinctrl: meson: separate soc driversJerome Brunet1-10/+1
When meson pinctrl is enabled, all meson platforms pinctrl drivers are built in the kernel, with a significant amount of data. This leads to situation where pinctrl drivers targeting an architecture are also compiled and shipped on another one (ex: meson8 - ARM - compiled and shipped on ARM64 builds). This is a waste of memory we can easily avoid. This change makes 4 pinctrl drivers (1 per SoC) out the original single driver, allowing to compile and ship only the ones required. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-12pinctrl: Do not depend in GPIOLIB, select itLinus Walleij1-2/+4
Instead of depends on GPIOLIB and having to run around in Kconfig menus looking for why your device is not available, simply select it from the pin control drivers that need it. The Kconfig for GPIOLIB is improved, selectable and this should "just work". Cc: Phil Reid <preid@electromag.com.au> Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Cc: Peter Rosin <peda@axentia.se> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-11pinctrl: change Kconfig PINCTRL variable to a menuconfigPhil Reid1-5/+4
This allows PINCTRL to be selected manually to allow enabling of the mcp23s08 i2c/spi gpio driver. Which is not platform specific. Signed-off-by: Phil Reid <preid@electromag.com.au> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-27pinctrl/amd: Fix build dependency on pinmux codePetr Mladek1-0/+1
The commit 79d2c8bede2c93f943 ("pinctrl/amd: save pin registers over suspend/resume") caused the following compilation errors: drivers/pinctrl/pinctrl-amd.c: In function ‘amd_gpio_should_save’: drivers/pinctrl/pinctrl-amd.c:741:8: error: ‘const struct pin_desc’ has no member named ‘mux_owner’ if (pd->mux_owner || pd->gpio_owner || ^ drivers/pinctrl/pinctrl-amd.c:741:25: error: ‘const struct pin_desc’ has no member named ‘gpio_owner’ if (pd->mux_owner || pd->gpio_owner || We need to enable CONFIG_PINMUX for this driver as well. Cc: stable@vger.kernel.org Fixes: 79d2c8bede2c93f943 ("pinctrl/amd: save pin registers over suspend/resume") Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-07Merge tag 'mfd-next-4.14' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
2017-08-31pinctrl: sprd: Add Spreadtrum pin control driverBaolin Wang1-0/+1
This patch adds the pin control driver for Spreadtrum SC9860 platform. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21pinctrl: Add pinctrl driver for the RK805 PMICJoseph Chen1-0/+9
RK805 is one of Rockchip PMICs family, it has 2 output only GPIOs. This driver is also designed for other Rockchip PMICs to expend. Different PMIC maybe have different pin features, for example, RK816 has one pin which can be used for TS or GPIO(input/out). The mainly difference between PMICs pins are pinmux, direction and output value, that is 'struct rk805_pin_config'. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-14pinctrl: add a Gemini SoC pin controllerLinus Walleij1-0/+7
This adds a pin control (only multiplexing) driver for the Gemini SoC so we can sort out this complex platform in an orderly manner. This driver will detect the chip/package version as SL3512 or SL3516 (also known as CS3512 and CS3516 etc) and register the apropriate pin set. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29Merge tag 'sh-pfc-for-v4.13-tag2' of ↵Linus Walleij1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.13 (take two) - Add SCIF1 and SCIF2 pin groups for R-Car V2H, - Add EtherAVB, DU parallel RGB output, and PWM pin groups for R-Car H3 ES2.0, - Add pin and gpio controller support for RZ/A1.
2017-06-23pinctrl: Renesas RZ/A1 pin and gpio controllerJacopo Mondi1-0/+11
Add combined gpio and pin controller driver for Renesas RZ/A1 r7s72100 SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-31pinctrl: mcp23s08: improve I2C Kconfig dependencyArnd Bergmann1-0/+1
With "SPI_MASTER=y && I2C=m", we can build mcp23s08 as a built-in driver, which then results in a link failure: drivers/pinctrl/built-in.o: In function `mcp23s08_probe_one.isra.0': :(.text+0x7910): undefined reference to `__devm_regmap_init_i2c' drivers/pinctrl/built-in.o: In function `mcp23s08_init': :(.init.text+0x110): undefined reference to `i2c_register_driver' drivers/pinctrl/built-in.o: In function `mcp23s08_exit': :(.exit.text+0x3c): undefined reference to `i2c_del_driver' To avoid the problem, this adds another dependency on I2C that enforces mcp23s08 to be a loadable module whenever the I2C core is a module. Fixes: 64ac43e6fa28 ("gpio: mcp23s08: move to pinctrl") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio/pinctrl: ingenic: depend on OFLinus Walleij1-0/+1
Fix compile errors due to missing OF. Cc: Paul Cercueil <paul@crapouillou.net> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23Merge branch 'mcp23s08' into develLinus Walleij1-0/+13
2017-05-23pinctrl: mcp23s08: drop OF_GPIO dependencySebastian Reichel1-1/+0
The driver compiles & works perfectly fine without OF_GPIO on x86, so lets drop the dependency. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23pinctrl: mcp23s08: add pinconf supportSebastian Reichel1-0/+1
mcp23xxx device have configurable 100k pullup resistors. This adds support for enabling them using pinctrl's pinconf interface. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23gpio: mcp23s08: move to pinctrlSebastian Reichel1-0/+13
This moves the mcp23s08 driver from gpio to pinctrl. Actual pinctrl support for configuration of the pull-up resistors follows in its own patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22Merge branch 'ingenic' into develLinus Walleij1-0/+9