summaryrefslogtreecommitdiffstats
path: root/drivers/phy
AgeCommit message (Collapse)AuthorFilesLines
2022-02-02phy: dphy: Correct clk_pre parameterLiu Ying3-4/+6
The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE parameter's unit is Unit Interval(UI) and the minimum value is 8. Also, kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy mentions that it should be in UI. However, the dphy core driver wrongly sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds. So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE parameter's minimum value according to the D-PHY specification. I'm assuming that all impacted custom drivers shall program values in TxByteClkHS cycles into hardware for the T-CLK-PRE parameter. The D-PHY specification mentions that the frequency of TxByteClkHS is exactly 1/8 the High-Speed(HS) bit rate(each HS bit consumes one UI). So, relevant custom driver code is changed to program those values as DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then. Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK. Help is needed to test with other i.MX8mq, Meson and Rockchip platforms, as I don't have the hardwares. Fixes: 2ed869990e14 ("phy: Add MIPI D-PHY configuration options") Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-27phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphyWan Jiabing1-1/+1
Fix following coccicheck warning: ./drivers/phy/mediatek/phy-mtk-tphy.c:994:6-29: duplicated argument to && or || The efuse_rx_imp is duplicate. Here should be efuse_tx_imp. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220107025050.787720-1-wanjiabing@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-27phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()Dan Carpenter1-1/+1
This error path needs to decrement "usbphyc->n_pll_cons.counter" before returning. Fixes: 5b1af71280ab ("phy: stm32: rework PLL Lock detection") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220112111724.GB3019@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-27phy: xilinx: zynqmp: Fix bus width setting for SGMIIRobert Hancock1-5/+6
TX_PROT_BUS_WIDTH and RX_PROT_BUS_WIDTH are single registers with separate bit fields for each lane. The code in xpsgtr_phy_init_sgmii was not preserving the existing register value for other lanes, so enabling the PHY in SGMII mode on one lane zeroed out the settings for all other lanes, causing other PS-GTR peripherals such as USB3 to malfunction. Use xpsgtr_clr_set to only manipulate the desired bits in the register. Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20220126001600.1592218-1-robert.hancock@calian.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-24phy: cadence: Sierra: fix error handling bugs in probe()Dan Carpenter1-14/+21
There are two bugs in the error handling: 1: If devm_of_phy_provider_register() fails then there was no cleanup. 2: The error handling called of_node_put(child) improperly leading to a use after free. We are only holding the reference inside the loop so the last two gotos after the loop lead to a use after free bug. Fix this by cleaning up the partial allocations (or partial iterations) in the loop before doing the goto. Fixes: a43f72ae136a ("phy: cadence: Sierra: Change MAX_LANES of Sierra to 16") Fixes: 44d30d622821 ("phy: cadence: Add driver for Sierra PHY") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220115115146.GC7552@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-24phy: ti: Fix missing sentinel for clk_div_tableKishon Vijay Abraham I1-0/+1
_get_table_maxdiv() tries to access "clk_div_table" array out of bound defined in phy-j721e-wiz.c. Add a sentinel entry to prevent the following global-out-of-bounds error reported by enabling KASAN. [ 9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148 [ 9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38 [ 9.565926] [ 9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd0e8d-dirty #360 [ 9.576242] Hardware name: Texas Instruments J721e EVM (DT) [ 9.581832] Workqueue: events_unbound deferred_probe_work_func [ 9.587708] Call trace: [ 9.590174] dump_backtrace+0x20c/0x218 [ 9.594038] show_stack+0x18/0x68 [ 9.597375] dump_stack_lvl+0x9c/0xd8 [ 9.601062] print_address_description.constprop.0+0x78/0x334 [ 9.606830] kasan_report+0x1f0/0x260 [ 9.610517] __asan_load4+0x9c/0xd8 [ 9.614030] _get_maxdiv+0xc0/0x148 [ 9.617540] divider_determine_rate+0x88/0x488 [ 9.622005] divider_round_rate_parent+0xc8/0x124 [ 9.626729] wiz_clk_div_round_rate+0x54/0x68 [ 9.631113] clk_core_determine_round_nolock+0x124/0x158 [ 9.636448] clk_core_round_rate_nolock+0x68/0x138 [ 9.641260] clk_core_set_rate_nolock+0x268/0x3a8 [ 9.645987] clk_set_rate+0x50/0xa8 [ 9.649499] cdns_sierra_phy_init+0x88/0x248 [ 9.653794] phy_init+0x98/0x108 [ 9.657046] cdns_pcie_enable_phy+0xa0/0x170 [ 9.661340] cdns_pcie_init_phy+0x250/0x2b0 [ 9.665546] j721e_pcie_probe+0x4b8/0x798 [ 9.669579] platform_probe+0x8c/0x108 [ 9.673350] really_probe+0x114/0x630 [ 9.677037] __driver_probe_device+0x18c/0x220 [ 9.681505] driver_probe_device+0xac/0x150 [ 9.685712] __device_attach_driver+0xec/0x170 [ 9.690178] bus_for_each_drv+0xf0/0x158 [ 9.694124] __device_attach+0x184/0x210 [ 9.698070] device_initial_probe+0x14/0x20 [ 9.702277] bus_probe_device+0xec/0x100 [ 9.706223] deferred_probe_work_func+0x124/0x180 [ 9.710951] process_one_work+0x4b0/0xbc0 [ 9.714983] worker_thread+0x74/0x5d0 [ 9.718668] kthread+0x214/0x230 [ 9.721919] ret_from_fork+0x10/0x20 [ 9.725520] [ 9.727032] The buggy address belongs to the variable: [ 9.732183] clk_div_table+0x24/0x440 Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20220117110108.4117-1-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-23phy: broadcom: Kconfig: Fix PHY_BRCM_USB config optionAl Cooper1-2/+1
The previous commit 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908") added a second "default" line for ARCH_BCM_4908 above the original "default" line for ARCH_BRCMSTB. When two "default" lines are used, only the first is used and this change stopped the PHY_BRCM_USB option for being enabled for ARCH_BRCMSTB. The fix is to use one "default line with "||". Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908") Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211201180653.35097-4-alcooperx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-23phy: usb: Leave some clocks running during suspendAl Cooper1-0/+38
The PHY client driver does a phy_exit() call on suspend or rmmod and the PHY driver needs to know the difference because some clocks need to be kept running for suspend but can be shutdown on unbind/rmmod (or if there are no PHY clients at all). The fix is to use a PM notifier so the driver can tell if a PHY client is calling exit() because of a system suspend or a driver unbind/rmmod. Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211201180653.35097-2-alcooperx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-14Merge tag 'char-misc-5.17-rc1' of ↵Linus Torvalds35-582/+4953
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char, misc, and other "small" driver subsystem changes for 5.17-rc1. Lots of different things are in here for char/misc drivers such as: - habanalabs driver updates - mei driver updates - lkdtm driver updates - vmw_vmci driver updates - android binder driver updates - other small char/misc driver updates Also smaller driver subsystems have also been updated, including: - fpga subsystem updates - iio subsystem updates - soundwire subsystem updates - extcon subsystem updates - gnss subsystem updates - phy subsystem updates - coresight subsystem updates - firmware subsystem updates - comedi subsystem updates - mhi subsystem updates - speakup subsystem updates - rapidio subsystem updates - spmi subsystem updates - virtual driver updates - counter subsystem updates Too many individual changes to summarize, the shortlog contains the full details. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits) counter: 104-quad-8: Fix use-after-free by quad8_irq_handler dt-bindings: mux: Document mux-states property dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC counter: remove old and now unused registration API counter: ti-eqep: Convert to new counter registration counter: stm32-lptimer-cnt: Convert to new counter registration counter: stm32-timer-cnt: Convert to new counter registration counter: microchip-tcb-capture: Convert to new counter registration counter: ftm-quaddec: Convert to new counter registration counter: intel-qep: Convert to new counter registration counter: interrupt-cnt: Convert to new counter registration counter: 104-quad-8: Convert to new counter registration counter: Update documentation for new counter registration functions counter: Provide alternative counter registration functions counter: stm32-timer-cnt: Convert to counter_priv() wrapper counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper counter: ti-eqep: Convert to counter_priv() wrapper counter: ftm-quaddec: Convert to counter_priv() wrapper counter: intel-qep: Convert to counter_priv() wrapper counter: microchip-tcb-capture: Convert to counter_priv() wrapper ...
2021-12-30Merge tag 'phy-for-5.17' of ↵Greg Kroah-Hartman35-582/+4953
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.17 - New support: - Qualcomm eDP PHY driver - Qualcomm SM8450 UFS, USB2, USB3, PCIe0 and PCIe1 phy support - Lan966x ethernet serdes PHY driver - Support for uniphier NXI & Pro4 SoC - Qualcomm SM6350 USB2 support - Amlogic Meson8 HDMI TX PHY driver - Rockchip rk3568 usb2 support - Intel Thunder Bay eMMC PHY driver - Freescale IMX8 PCIe phy driver - Updates: - Cadence Sierra driver updates for multilink configurations - Bcm usb2 updates for Phy reg space * tag 'phy-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) phy: cadence: Sierra: Add support for derived reference clock output dt-bindings: phy: cadence-sierra: Add clock ID for derived reference clock phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configuration phy: cadence: Sierra: Add support for PHY multilink configurations phy: cadence: Sierra: Fix to get correct parent for mux clocks phy: cadence: Sierra: Update single link PCIe register configuration phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operation phy: cadence: Sierra: Check cmn_ready assertion during PHY power on phy: cadence: Sierra: Add PHY PCS common register configurations phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra documentation phy: cadence: Sierra: Add support to get SSC type from device tree dt-bindings: phy: cadence-sierra: Add binding to specify SSC mode dt-bindings: phy: cadence-torrent: Rename SSC macros to use generic names phy: cadence: Sierra: Prepare driver to add support for multilink configurations phy: cadence: Sierra: Use of_device_get_match_data() to get driver data phy: mediatek: Fix missing check in mtk_mipi_tx_probe phy: uniphier-usb3ss: fix unintended writing zeros to PHY register phy: phy-mtk-tphy: use new io helpers to access register phy: phy-mtk-xsphy: use new io helpers to access register phy: mediatek: add helpers to update bits of registers ...
2021-12-27phy: cadence: Sierra: Add support for derived reference clock outputSwapnil Jakhade1-1/+108
Sierra has derived differential reference clock output which is sourced after the spread spectrum generation has been added. Add support to drive derived reference clock out of serdes. Model this derived clock as a "clock" so that platforms using this can enable it. Sierra Main LC VCO PLL divider 1 clock is programmed to output 100MHz clock output. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-16-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configurationSwapnil Jakhade1-1/+376
Add register sequences for PCIe + QSGMII PHY multilink configuration. PHY configuration for multi-link operation is done in two steps. e.g. Consider a case for a 4 lane PHY with PCIe using 2 lanes and QSGMII other 2 lanes. Sierra PHY has 2 PLLs, viz. PLLLC and PLLLC1. So in this case, PLLLC is used for PCIe and PLLLC1 is used for QSGMII. PHY is configured in two steps as described below. [1] For first step, the register values are selected as [TYPE_PCIE][TYPE_QSGMII][ssc]. This will configure PHY registers associated for PCIe involving PLLLC registers and registers for first 2 lanes of PHY. [2] In second step, the register values are selected as [TYPE_QSGMII][TYPE_PCIE][ssc]. This will configure PHY registers associated for QSGMII involving PLLLC1 registers and registers for other 2 lanes of PHY. This completes the PHY configuration for multilink operation. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-14-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add support for PHY multilink configurationsSwapnil Jakhade1-8/+190
Add support for multilink configuration of Sierra PHY. Currently, maximum two links are supported. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-13-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Fix to get correct parent for mux clocksSwapnil Jakhade1-5/+26
Fix get_parent() callback to return the correct index of the parent for PLL_CMNLC1 clock. Add a separate table of register values corresponding to the parent index for PLL_CMNLC1. Update set_parent() callback accordingly. Fixes: 28081b72859f ("phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as clocks (mux clocks)") Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-12-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Update single link PCIe register configurationSwapnil Jakhade1-1/+213
Add single link PCIe register configurations for no SSC and internal SSC. Also, add missing PMA lane registers for external SSC. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-11-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operationSwapnil Jakhade1-1/+72
PIPE phy status is used to communicate the completion of several PHY functions. Check if PHY is ready for operation while configured for PIPE mode during startup. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-10-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Check cmn_ready assertion during PHY power onSwapnil Jakhade1-0/+45
Check if PMA cmn_ready is set indicating the startup process is complete. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-9-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add PHY PCS common register configurationsSwapnil Jakhade1-0/+38
Add PHY PCS common register configuration sequences for single link. Update single link PCIe register sequence accordingly. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-8-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra ↵Swapnil Jakhade1-10/+11
documentation No functional change. Rename some regmap variables as mentioned in Sierra register description documentation. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-7-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add support to get SSC type from device treeSwapnil Jakhade1-1/+5
Add support to get SSC type from DT. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-6-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Prepare driver to add support for multilink configurationsSwapnil Jakhade1-56/+139
Sierra driver currently supports single link configurations only. Prepare driver to support multilink multiprotocol configurations along with different SSC modes. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-3-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Use of_device_get_match_data() to get driver dataSwapnil Jakhade1-9/+4
Use of_device_get_match_data() to get driver data instead of boilerplate code. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-2-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: mediatek: Fix missing check in mtk_mipi_tx_probeMiaoqian Lin1-0/+2
The of_device_get_match_data() function may return NULL. Add check to prevent potential null dereference. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211224082103.7658-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-24phy: uniphier-usb3ss: fix unintended writing zeros to PHY registerRyuta NAKANISHI1-4/+6
Similar to commit 4a90bbb478db ("phy: uniphier-pcie: Fix updating phy parameters"), in function uniphier_u3ssphy_set_param(), unintentionally write zeros to other fields when writing PHY registers. Fixes: 5ab43d0f8697 ("phy: socionext: add USB3 PHY driver for UniPhier SoC") Signed-off-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1640150369-4134-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-24phy: phy-mtk-tphy: use new io helpers to access registerChunfeng Yun1-325/+179
Use new helpers mtk_phy_clear/set/update_bits() to access registers Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218082802.5256-5-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-24phy: phy-mtk-xsphy: use new io helpers to access registerChunfeng Yun1-94/+46
Use new helpers mtk_phy_clear/set/update_bits() to access registers Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218082802.5256-4-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-24phy: mediatek: add helpers to update bits of registersChunfeng Yun1-0/+38
Add three helpers mtk_phy_clear/set/update_bits() for registers operation Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218082802.5256-3-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-24phy: phy-mtk-tphy: add support efuse settingChunfeng Yun1-0/+162
Due to some SoCs have a bit shift issue that will drop a bit for usb3 phy or pcie phy, fix it by adding software efuse reading and setting, but only support it optionally for version 2/3. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218082802.5256-2-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-24phy: qcom-qmp: Add SM8450 PCIe1 PHY supportDmitry Baryshkov2-0/+223
There are two different PCIe PHYs on SM8450, one having one lane (v5) and another with two lanes (v5.20). This commit adds support for the second PCIe phy. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211218141754.503661-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: add rk3568 supportPeter Geis1-0/+65
The rk3568 usb2phy is a standalone device with a single muxed interrupt. Add support for the registers to the usb2phy driver. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-7-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: support muxed interruptsPeter Geis1-49/+119
The rk3568 usb2phy has a single muxed interrupt that handles all interrupts. Allow the driver to plug in only a single interrupt as necessary. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-6-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: support standalone phy nodesPeter Geis1-5/+12
New Rockchip devices have the usb2 phy devices as standalone nodes instead of children of the grf node. Allow the driver to find the grf node from a phandle. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-5-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: support #address_cells = 2Peter Geis1-1/+10
New Rockchip devices have the usb phy nodes as standalone devices. These nodes have register nodes with #address_cells = 2, but only use 32 bit addresses. Adjust the driver to check if the returned address is "0", and adjust the index in that case. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-4-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-18phy: qcom-qmp: Add SM8450 PCIe0 PHY supportDmitry Baryshkov2-0/+158
There are two different PCIe PHYs on SM8450, one having one lane (v5) and another with two lanes (v5.20). This commit adds support for the first PCIe phy only, support for the second PCIe PHY is coming in next commits. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211214225846.2043361-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski10-24/+29
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16phy: qcom-qmp: Add SM8450 USB QMP PHYsVinod Koul1-0/+3
Add support for the USB DP & UNI PHYs found on SM8450. This is same as the phy version used on SM8350 and sequences turned out to be same, so use the same table from SM8350 for this as well. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213131450.535775-3-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-15phy: freescale: pcie: explicitly add bitfield.hVinod Koul1-0/+1
kernel test robot complains about missing FIELD_PREP, so include bitfield.h for that drivers/phy/freescale/phy-fsl-imx8m-pcie.c:41:37: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration] drivers/phy/freescale/phy-fsl-imx8m-pcie.c:41:41: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver") Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Link: https://lore.kernel.org/r/20211215060834.921617-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-14phy: freescale: pcie: Initialize the imx8 pcie standalone phy driverRichard Zhu3-0/+245
Add the standalone i.MX8 PCIe PHY driver. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Link: https://lore.kernel.org/r/1638432158-4119-6-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-14phy: rockchip-inno-usb2: remove redundant assignment to variable delayColin Ian King1-1/+0
Variable delay is being assigned to zero and the code falls through to the next case in a switch statement that returns out of the function. The variable is never read in this scenario and so the assignment is redundant and can be removed. Cleans up scan-build static analysis warning: drivers/phy/rockchip/phy-rockchip-inno-usb2.c:753:3: warning: Value stored to 'delay' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211211180054.525368-1-colin.i.king@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-14phy: lan966x: Remove set_speed functionHoratiu Vultur1-12/+5
Remove the set_speed function and allow the driver to figure out the speed at which needs to configure the serdes based on the interface type. Fixes: 305524902a0045 ("phy: Add lan966x ethernet serdes PHY driver") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20211211214717.1284306-1-horatiu.vultur@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-14phy: ti: Use IS_ERR_OR_NULL() to clean codeMiaoqian Lin1-3/+3
Use IS_ERR_OR_NULL() to make the code cleaner. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20211212142226.23674-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-14phy: tegra: xusb: Fix return value of tegra_xusb_find_port_node functionMiaoqian Lin1-1/+1
callers of tegra_xusb_find_port_node() function only do NULL checking for the return value. return NULL instead of ERR_PTR(-ENOMEM) to keep consistent. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20211213020507.1458-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-09phy: qcom: use struct_size instead of sizeofGuo Zhengkui1-1/+1
Use struct_size() to get the accurate size of `clk_hw_onecell_data` with a variable size array, instead of sizeof(data) to get the size of a pointer. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Fixes: f199223cb490 ("phy: qcom: Introduce new eDP PHY driver") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211209032114.9416-1-guozhengkui@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-07phy: qcom-qmp: Add SM8450 UFS QMP PhyVinod Koul1-0/+32
SM8450 UFS seems to use same sequence as SM8350, so reuse the sequence from SM8450. Add the new clock list for this phy and the new compatible Signed-off-by: Vinod Koul <vkoul@kernel.org> Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20211201074456.3969849-4-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-02phy: lan966x: Extend lan966x to support multiple phy interfaces.Horatiu Vultur1-0/+4
Currently the driver is supporting only the interfaces QSGMII, SGMII, RGMII and GMII. This patch extend the supported interfaces with 1000BASE-X and 2500BASE-X. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20211130101015.164916-1-horatiu.vultur@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-02phy: intel: Remove redundant dev_err call in thunderbay_emmc_phy_probe()Zou Wei1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1637822289-24534-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-26phy: stm32: adopt dev_err_probe for regulatorsFabrice Gasnier1-6/+4
Change stm32-usbphyc driver to use dev_err_probe(), to benefit of devices_deferred debugfs in case of probe deferral. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/1635172265-26219-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-25phy: bcm-ns-usb2: improve printing ref clk errorsRafał Miłecki1-1/+1
Improve message & use dev_err_probe() helper which prints actual error (helpful for debugging) and deals with -EPROBE_DEFER. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211123221521.25323-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: marvell: phy-mvebu-cp110-comphy: add support for 5gbase-rMarek Behún1-0/+9
Add support for PHY_INTERFACE_MODE_5GBASER mode within the Marvell CP110 common PHY driver. This is currently only supported via SMC calls to TF-A. Legacy support may be added later, if needed. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23phy: intel: Add Thunder Bay eMMC PHY supportRashmi A3-0/+522
Add support of eMMC PHY for Intel Thunder Bay SoC, uses the Arasan eMMC phy Signed-off-by: Rashmi A <rashmi.a@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20211027115516.4475-5-rashmi.a@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 08:54:38 +0000