Age | Commit message (Collapse) | Author | Files | Lines |
|
mtk_hdmi_phy_driver is not declared as static, so statify it.
drivers/phy/mediatek/phy-mtk-hdmi.c:204:24: warning: symbol 'mtk_hdmi_phy_driver' was not declared. Should it be static?
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20201205091146.3184305-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Update the rockchip-emmc phy to set the otapdlysec register with
a dt property. This was mentioned from Brian Norris when he sent
the path to set the default value in the driver.
This patch add a dt property 'output-tapdelay-select' u32 and allow
to set the 0x0-0xf. If not set in dts, the old default 0x4 applies.
Tested with our customized rk3399 to tune the eMMC.
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Link: https://lore.kernel.org/r/20201202082507.3536-2-chris.ruehl@gtsys.com.hk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Used the generic PHY framework API to create the PHY, this driver
supoorts USB OTG PHY used in JZ4770 SoC, JZ4775 SoC, JZ4780 SoC,
X1000 SoC, X1830 SoC and X2000 SoC.
Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201116141906.11758-4-zhouyanjie@wanyeetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This patch add support to set the internal pulldown via dt property
and allow simplify the board design for the trace from emmc-phy to
the eMMC chipset.
Default to not set the pull-down.
This patch was inspired from the 4.4 tree of the
Rockchip SDK, where it is enabled unconditional.
The patch had been tested with our rk3399 customized board.
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Link: https://lore.kernel.org/r/20201129054416.3980-2-chris.ruehl@gtsys.com.hk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
pm_runtime_enable() will decrease power disable depth. Thus a pairing
increment is needed on the error handling path to keep it balanced.
Fixes: 5d8042e95fd4 ("phy: rcar-gen3-usb2: Add support for r8a77470")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Li <wangli74@huawei.com>
Link: https://lore.kernel.org/r/20201126024412.4046845-1-wangli74@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Compile-testing the DRM_MEDIATEK_HDMI driver shows two missing
dependencies, one results in a link failure:
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi.o: in function `mtk_hdmi_phy_probe':
phy-mtk-hdmi.c:(.text+0xd8): undefined reference to `__clk_get_name'
arm-linux-gnueabi-ld: phy-mtk-hdmi.c:(.text+0x12c): undefined reference to `devm_clk_register'
arm-linux-gnueabi-ld: phy-mtk-hdmi.c:(.text+0x250): undefined reference to `of_clk_add_provider'
arm-linux-gnueabi-ld: phy-mtk-hdmi.c:(.text+0x298): undefined reference to `of_clk_src_simple_get'
The other one is a harmless warning:
WARNING: unmet direct dependencies detected for PHY_MTK_HDMI
Depends on [n]: ARCH_MEDIATEK [=n] && OF [=y]
Selected by [y]:
- DRM_MEDIATEK_HDMI [=y] && HAS_IOMEM [=y] && DRM_MEDIATEK [=y]
Fix these by adding dependencies on CONFIG_OF and CONFIG_COMMON_CLK.
With that done, there is also no reason against adding
CONFIG_COMPILE_TEST.
Fixes: b28be59a2e26 ("phy: mediatek: Move mtk_hdmi_phy driver into drivers/phy/mediatek folder")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201204135650.2744481-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
devm_ioremap_resource() will be not built in lib/devres.c if
CONFIG_HAS_IOMEM is not set, and then there exists a build
error about undefined reference to "devm_ioremap_resource"
in the file phy-rockchip-inno-hdmi.c under COMPILE_TEST and
CONFIG_PHY_ROCKCHIP_INNO_HDMI, make PHY_ROCKCHIP_INNO_HDMI
depend on HAS_IOMEM to fix it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/1606216287-14648-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Exynos5420 variant of USB2 PHY is handled by the same code as the
Exynos5250 one. Introducing a separate Kconfig symbol for it was an
over-engineering, which turned out to cause build break for certain
configurations:
ERROR: modpost: "exynos5420_usb2_phy_config" [drivers/phy/samsung/phy-exynos-usb2.ko] undefined!
Fix this by removing PHY_EXYNOS5420_USB2 symbol and using
PHY_EXYNOS5250_USB2 also for Exynos5420 SoCs.
Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Fixes: 81b534f7e9b2 ("phy: samsung: Add support for the Exynos5420 variant of the USB2 PHY")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/20201202064759.24300-1-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Correct name passed into 'MODULE_DEVICE_TABLE' which was wrong and
was showing a warning when the driver is enabled for 'COMPILE_TEST'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20201201112051.17463-3-sergio.paracuellos@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This driver includes the following two files directly:
- mt7621.h
- ralink_regs.h
Compilation for its related platform properly works because
its real path is included in 'arch/mips/ralink/Platform' as
cflags.
This driver depends on RALINK but also is enabled for COMPILE_TEST
where nothing about its platform is known and this directly
included files are not found at all breaking compilation.
If we want 'COMPILE_TEST' we have to change cflags also inside
'phy/ralink' subdirectory Makefile which seems that does not
like to linux-phy maintainers. Hence remove COMPILE_TEST from
Kconfig to avoid the problem.
Fixes: d87da32372a0 ("phy: ralink: Add PHY driver for MT7621 PCIe PHY")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20201201112051.17463-2-sergio.paracuellos@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
mtk_mipi_dsi_phy is currently placed inside mediatek drm driver, but it's
more suitable to place a phy driver into phy driver folder, so move
mtk_mipi_dsi_phy driver into phy driver folder.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
to fix build errors
devm_ioremap_resource() will be not built in lib/devres.c if
CONFIG_HAS_IOMEM is not set, of_address_to_resource() will be
not built in drivers/of/address.c if CONFIG_OF_ADDRESS is not
set, and then there exists two build errors about undefined
reference to "devm_ioremap_resource" and "of_address_to_resource"
in phy-mtk-xsphy.c under COMPILE_TEST and CONFIG_PHY_MTK_XSPHY,
make PHY_MTK_XSPHY depend on HAS_IOMEM and OF_ADDRESS to fix it.
The above issue is reported by kernel test robot <lkp@intel.com>,
through the discussion in the v1 patch, as Chunfeng said we need
also do this for config PHY_MTK_TPHY:
drivers/phy/mediatek/phy-mtk-tphy.c:1157: retval = of_address_to_resource(child_np, 0, &res);
drivers/phy/mediatek/phy-mtk-tphy.c:1123: tphy->sif_base = devm_ioremap_resource(dev, sif_res);
drivers/phy/mediatek/phy-mtk-tphy.c:1164: instance->port_base = devm_ioremap_resource(&phy->dev, &res);
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1606289865-692-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In commit "phy: tegra: xusb: Add usb-phy support", an OTG capable PHY
device, such as phy-usb2.0 device of Jetson-TX1 platform, will be
bound to the tegra-xusb-padctl driver by the following line in
tegra_xusb_setup_usb_role_switch().
port->usb_phy.dev->driver = port->padctl->dev->driver;
With this, dev_pm_ops set of tegra-xusb-padctl driver will be invoked
for the OTG capable PHY incorrectly as below logs show.
This commit fixes the issue by assigning an empty driver to it.
[ 153.451108] tegra-xusb-padctl phy-usb2.0: > tegra_xusb_padctl_suspend_noirq(dev=ffff000080917000)
[ 153.460353] tegra-xusb-padctl phy-usb2.0: driver: ffff8000114453e0 (tegra_xusb_padctl_driver)
[ 153.469245] tegra-xusb-padctl phy-usb2.0: padctl: ffff0000829f6480
[ 153.475772] tegra-xusb-padctl phy-usb2.0: soc: ef7bdd7fffffffff (0xef7bdd7fffffffff)
[ 153.484061] Unable to handle kernel paging request at virtual address 007bdd800000004f
[ 153.492132] Mem abort info:
[ 153.495083] ESR = 0x96000004
[ 153.498308] EC = 0x25: DABT (current EL), IL = 32 bits
[ 153.503771] SET = 0, FnV = 0
[ 153.506979] EA = 0, S1PTW = 0
[ 153.510260] Data abort info:
[ 153.513200] ISV = 0, ISS = 0x00000004
[ 153.517181] CM = 0, WnR = 0
[ 153.520302] [007bdd800000004f] address between user and kernel address ranges
[ 153.527600] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 153.533231] Modules linked in: nouveau panel_simple tegra_video(C) tegra_drm drm_ttm_helper videobuf2_dma_contig ttm videobuf2_memops cec videobuf2_v4l2 videobuf2_common drm_kms_helper v4l2_fwnode videodev drm mc snd_hda_codec_hdmi cdc_ether usbnet snd_hda_tegra r8152 crct10dif_ce snd_hda_codec snd_hda_core tegra_xudc host1x lp855x_bl at24 ip_tables x_tables ipv6
[ 153.566417] CPU: 0 PID: 300 Comm: systemd-sleep Tainted: G C 5.10.0-rc3-next-20201113-00019-g5c064d5372b0-dirty #624
[ 153.578283] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
[ 153.584281] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[ 153.590381] pc : tegra_xusb_padctl_suspend_noirq+0x88/0x100
[ 153.596016] lr : tegra_xusb_padctl_suspend_noirq+0x80/0x100
[ 153.601632] sp : ffff8000120dbb60
[ 153.604999] x29: ffff8000120dbb60 x28: ffff000080a1df00
[ 153.610430] x27: 0000000000000002 x26: ffff8000106f8540
[ 153.615858] x25: ffff8000113ac4a4 x24: ffff80001148c198
[ 153.621277] x23: ffff800010c4538c x22: 0000000000000002
[ 153.626692] x21: ffff800010ccde80 x20: ffff0000829f6480
[ 153.632107] x19: ffff000080917000 x18: 0000000000000030
[ 153.637521] x17: 0000000000000000 x16: 0000000000000000
[ 153.642933] x15: ffff000080a1e380 x14: 74636461702d6273
[ 153.648346] x13: ffff8000113ad058 x12: 0000000000000f39
[ 153.653759] x11: 0000000000000513 x10: ffff800011405058
[ 153.659176] x9 : 00000000fffff000 x8 : ffff8000113ad058
[ 153.664590] x7 : ffff800011405058 x6 : 0000000000000000
[ 153.670002] x5 : 0000000000000000 x4 : ffff0000fe908bc0
[ 153.675414] x3 : ffff0000fe910228 x2 : 162ef67e0581e700
[ 153.680826] x1 : 162ef67e0581e700 x0 : ef7bdd7fffffffff
[ 153.686241] Call trace:
[ 153.688769] tegra_xusb_padctl_suspend_noirq+0x88/0x100
[ 153.694077] __device_suspend_noirq+0x68/0x1cc
[ 153.698594] dpm_noirq_suspend_devices+0x10c/0x1d0
[ 153.703456] dpm_suspend_noirq+0x28/0xa0
[ 153.707461] suspend_devices_and_enter+0x234/0x4bc
[ 153.712314] pm_suspend+0x1e4/0x270
[ 153.715868] state_store+0x8c/0x110
[ 153.719440] kobj_attr_store+0x1c/0x30
[ 153.723259] sysfs_kf_write+0x4c/0x7c
[ 153.726981] kernfs_fop_write+0x124/0x240
[ 153.731065] vfs_write+0xe4/0x204
[ 153.734449] ksys_write+0x6c/0x100
[ 153.737925] __arm64_sys_write+0x20/0x30
[ 153.741931] el0_svc_common.constprop.0+0x78/0x1a0
[ 153.746789] do_el0_svc+0x24/0x90
[ 153.750181] el0_sync_handler+0x254/0x260
[ 153.754251] el0_sync+0x174/0x180
[ 153.757663] Code: aa0303e2 94000f64 f9405680 b40000e0 (f9402803)
[ 153.763826] ---[ end trace 81543a3394cb409d ]---
Fixes: e8f7d2f409a1 ("phy: tegra: xusb: Add usb-phy support")
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201117083803.185209-1-jckuo@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
devm_reset_control_array_get_exclusive() looks more readable
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/1605666995-16462-1-git-send-email-yejune.deng@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In order to keep OTG ID detection even when in Host mode, the ID line of
the PHY (if the current phy is an OTG one) pull-up should be kept
enable in both modes.
This fixes OTG switch on GXL, GXM & AXG platforms, otherwise once switched
to Host, the ID detection doesn't work anymore to switch back to Device.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20201120153855.3920757-1-narmstrong@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
BIT() macro
For consistency, replace DSI_LANE definitions with BIT() macro and remove the unused
DSI_LANE_MASK definition.
Suggested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20201120150347.3914901-1-narmstrong@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Exynos5420 differs a bit from Exynos5250 in USB2 PHY related registers in
the PMU region. Add a variant for the Exynos5420 case. Till now, USB2 PHY
worked only because the bootloader enabled the PHY, but then driver messed
USB 3.0 DRD related registers during the suspend/resume cycle.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120085637.7299-2-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This patch adds a driver for the PCIe PHY of MT7621 SoC.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20201121155037.21354-3-sergio.paracuellos@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add PHY driver for the USB3.1 and USB 2.0 PHYs found on Intel
Keem Bay SoC. This driver takes care of enabling the required
USB susbsystem (USS) clocks, initializing the PHYs and turning
on/off the USB dwc3 core.
Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201116120831.32641-3-wan.ahmad.zainie.wan.mohamad@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix the typo s/tunning/tuning
Fixes: 496db029142f ("phy: samsung: phy-exynos-pcie: rework driver to support Exynos5433 PCIe PHY")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Exynos5440 SoC support has been dropped since commit 8c83315da1cf ("ARM:
dts: exynos: Remove Exynos5440"). Rework this driver to support PCIe PHY
variant found in the Exynos5433 SoCs.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
[mszyprow: reworked the driver to support only Exynos5433 variant, rebased
onto current kernel code, rewrote commit message]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
Link: https://lore.kernel.org/r/20201120102627.14450-1-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The AXG Analog MIPI-DSI PHY also provides functions to the PCIe PHY,
thus we need to have inclusive support for both interfaces at runtime.
This fixes the regmap get from parent node, removes cell param
to select a mode and implement runtime configuration & power on/off
for both functions since they are not exclusive.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Remi Pommarel <repk@triplefau.lt>
Link: https://lore.kernel.org/r/20201116101647.73448-4-narmstrong@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Amlogic AXG SoCs embeds a MIPI D-PHY used to communicate with DSI
panels.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20201116101315.71720-3-narmstrong@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Initially this PHY driver was implementing MDIO access on its own. It
was caused by lack of proper hardware design understanding.
It has been changed back in 2017. DT bindings were changed and driver
was updated to use MDIO layer.
It should be really safe now to drop the old deprecated code. All Linux
stored DT files don't use it for 3,5 year. There is close to 0 chance
there is any bootloader with its own DTB using old the binding.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201113113423.9466-1-zajec5@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For the current code, enable_pmu_unk1 only works in non-a83t and non-h6
types. So let's delete it from the sun50i_h6_cfg.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Link: https://lore.kernel.org/r/dc8cbb7b3cd59902a6719f207d18a232903fac8a.1604988979.git.frank@allwinnertech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This reverts commit 3cc8e86721ad ("phy: amlogic: Replace
devm_reset_control_array_get()") as it caused build failure
drivers/soc/amlogic/meson-ee-pwrc.c: In function 'meson_ee_pwrc_init_domain':
drivers/soc/amlogic/meson-ee-pwrc.c:416:65: error: expected ';' before 'if'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Deferred probe is an expected return value for devm_regulator_bulk_get().
Given that the driver deals with it properly, there's no need to output a
warning that may potentially confuse users.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: JC Kuo <jckuo@nvidia.com>
Link: https://lore.kernel.org/r/20201111103708.152566-1-jonathanh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Read the 'brcm,tx-amplitude-millivolt' property from Device Tree and
propagate its value into the appropriate test transmit register to
change the TX amplitude.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201022205056.233879-3-f.fainelli@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Change stm32-usbphyc driver to defer its probe when the expected reset
control has its probe operation deferred.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20201110102305.27205-2-amelie.delaunay@st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Change stm32-usbphyc driver to not print an error message when the device
probe operation is deferred.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20201110130531.7610-1-amelie.delaunay@st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There is a spelling mistake in the Kconfig. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201114120518.416120-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This Kconfig entry should declare a dependency on OF
Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20201113151225.1657600-3-bryan.odonoghue@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This Kconfig entry should declare a dependency on OF
Fixes: 6076967a500c ("phy: qualcomm: usb: Add SuperSpeed PHY driver")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.org/lkml/2020/11/13/414
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20201113151225.1657600-2-bryan.odonoghue@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Intel Keem Bay eMMC PHY is only present on Intel Keem Bay SoCs.
Hence add a dependency on ARCH_KEEMBAY, to prevent asking the user about
this driver when configuring a kernel without Intel Keem Bay platform
support.
Fixes: 885c4f4d6cf448f6 ("phy: intel: Add Keem Bay eMMC PHY support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201110144600.3279752-1-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The only usage of tegra_xusb_pad_type and tegra_xusb_port_type is to
assign their address to the type field in the device struct, which is a
const pointer. Make them const to allow the compiler to put them in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20201109215844.167954-1-rikard.falkeborn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
devm_reset_control_array_get_exclusive() looks more readable
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/1604378274-6860-1-git-send-email-yejune.deng@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource(_byname) to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1604642930-29019-17-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource(_byname) to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: JC Kuo <jckuo@nvidia.com>
Link: https://lore.kernel.org/r/1604642930-29019-16-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/1604642930-29019-15-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/1604642930-29019-14-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1604642930-29019-13-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1604642930-29019-12-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1604642930-29019-11-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource(_byname) to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1604642930-29019-10-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1604642930-29019-9-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1604642930-29019-8-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/1604642930-29019-7-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1604642930-29019-6-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1604642930-29019-5-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1604642930-29019-4-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|