summaryrefslogtreecommitdiffstats
path: root/drivers/phy
AgeCommit message (Collapse)AuthorFilesLines
2022-08-04Merge tag 'pci-v5.20-changes' of ↵Linus Torvalds1-16/+9
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds5-55/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-08-04Merge tag 'char-misc-6.0-rc1' of ↵Linus Torvalds62-7719/+14104
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem changes for 6.0-rc1. Highlights include: - large set of IIO driver updates, additions, and cleanups - new habanalabs device support added (loads of register maps much like GPUs have) - soundwire driver updates - phy driver updates - slimbus driver updates - tiny virt driver fixes and updates - misc driver fixes and updates - interconnect driver updates - hwtracing driver updates - fpga driver updates - extcon driver updates - firmware driver updates - counter driver update - mhi driver fixes and updates - binder driver fixes and updates - speakup driver fixes All of these have been in linux-next for a while without any reported problems" * tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits) drivers: lkdtm: fix clang -Wformat warning char: remove VR41XX related char driver misc: Mark MICROCODE_MINOR unused spmi: trace: fix stack-out-of-bound access in SPMI tracing functions dt-bindings: iio: adc: Add compatible for MT8188 iio: light: isl29028: Fix the warning in isl29028_remove() iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes iio: fix iio_format_avail_range() printing for none IIO_VAL_INT iio: adc: max1027: unlock on error path in max1027_read_single_value() iio: proximity: sx9324: add empty line in front of bullet list iio: magnetometer: hmc5843: Remove duplicate 'the' iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() ...
2022-08-01phy: samsung: phy-exynos-pcie: sanitize init/power_on callbacksMarek Szyprowski1-16/+9
The exynos-pcie driver called phy_power_on() before phy_init() for some historical reasons. However the generic PHY framework assumes that the proper sequence is to call phy_init() first, then phy_power_on(). The operations done by both functions should be considered as one action and as such they are called by the exynos-pcie driver (without doing anything between them). The initialization is just a sequence of register writes, which cannot be altered without breaking the hardware operation. To match the generic PHY framework requirement, simply move all register writes to the phy_init()/phy_exit() and drop power_on()/power_off() callbacks. This way the driver will also work with the old (incorrect) PHY initialization call sequence. Link: https://lore.kernel.org/r/20220628220409.26545-1-m.szyprowski@samsung.com Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org>
2022-07-15phy: rockchip-inno-usb2: Ignore OTG IRQs in host modeSamuel Holland1-1/+3
When the OTG port is fixed to host mode, the driver does not request its IRQs, nor does it enable those IRQs in hardware. Similarly, the driver should ignore the OTG port IRQs when handling the shared interrupt. Otherwise, it would update the extcon based on an ID pin which may be in an undefined state, or try to queue a uninitialized work item. Fixes: 6a98df08ccd5 ("phy: rockchip-inno-usb2: Fix muxed interrupt support") Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20220708061434.38115-1-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-15phy: qcom-qmp-usb: statify qmp_phy_vreg_lVinod Koul1-1/+1
qmp_phy_vreg_l should be marked static, this resolves warning: drivers/phy/qualcomm/phy-qcom-qmp-combo.c:616:27: warning: symbol 'qmp_phy_vreg_l' was not declared. Should it be static? Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220708052059.3049443-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-15phy: stm32: fix error return in stm32_usbphyc_phy_initFabrice Gasnier1-1/+3
Error code is overridden, in case the PLL doesn't lock. So, the USB initialization can continue. This leads to a platform freeze. This can be avoided by returning proper error code to avoid USB probe freezing the platform. It also displays proper errors in log. Fixes: 5b1af71280ab ("phy: stm32: rework PLL Lock detection") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220713133953.595134-1-fabrice.gasnier@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-08phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCAWilliam Zhang1-1/+1
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make PHY_BRCM_SATA depending on ARCH_BCMBCA. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-07-08phy: phy-mtk-dp: change mtk_dp_phy_driver to staticYang Yingliang1-1/+1
mtk_dp_phy_driver is only used in phy-mtk-dp.c now, change it to static. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220707135309.801181-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-08phy: freescale: Add i.MX8qm Mixel LVDS PHY supportLiu Ying3-0/+460
Add Freescale i.MX8qm LVDS PHY support. The PHY IP is from Mixel, Inc. Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20220706034810.2352641-4-victor.liu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-08phy: cadence-torrent: Remove unused `regmap` field from state structLars-Peter Clausen1-1/+0
The driver state struct for the sierra PHY driver has a field named `regmap` that is never referenced. Remove it since it is unused. Not that there are separate fields of type `struct regmap` for the individual sections of the device's register map. These other regmaps are used and not affected by the patch. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220707071722.44201-2-lars@metafoo.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-08phy: cadence: Sierra: Remove unused `regmap` field from state structLars-Peter Clausen1-1/+0
The driver state struct for the sierra PHY driver has a field named `regmap` that is never referenced. Remove it since it is unused. Not that there are separate fields of type `struct regmap` for the individual sections of the device's register map. These other regmaps are used and not affected by the patch. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220707071722.44201-1-lars@metafoo.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-08phy: samsung-ufs: ufs: change phy on/off controlChanho Park1-13/+19
The sequence of controlling ufs phy block should be below: 1) Power On - Turn off pmu isolation - Clock enable 2) Power Off - Clock disable - Turn on pmu isolation Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220706020255.151177-3-chanho61.park@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-08phy: samsung-ufs: convert phy clk usage to clk_bulk APIChanho Park5-88/+42
Instead of using separated clock manipulation, this converts the phy clock usage to be clk_bulk APIs. By using this, we can completely remove has_symbol_clk check and symbol clk variables. Furthermore, clk_get should be moved to probe because there is no need to get them in the phy_init callback. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220706020255.151177-2-chanho61.park@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp-usb: define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME registerDmitry Baryshkov6-9/+3
Other PHYs tables directly reference QPHY_PLL_LOCK_CHK_DLY_TIME register without using reglayout. Define corresponding register to be used by msm8996 PHY tables and use it directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-29-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp-usb: replace FLL layout writes for msm8996Dmitry Baryshkov6-45/+12
Other PHYs tables directly reference FLL registers without using reglayout. Define corresponding registers to be used by msm8996 PHY tables and use them directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-28-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: pcs-pcie-v4: add missing registersDmitry Baryshkov1-0/+49
Add missing registers, verified against: - msm-4.19's qcom,kona-qmp-usb3.h Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-27-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: pcs-v3: add missing registersDmitry Baryshkov1-0/+82
Add missing registers, verified against: - msm-4.19's qcom,usb3-11nm-qmp-combo.h Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-26-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: qserdes-com-v5: add missing registersDmitry Baryshkov2-4/+210
Add missing registers, verified against: - msm-5.4's qcom,usb3-5nm-qmp-uni.h - msm-5.4's qcom,usb3-5nm-qmp-combo.h Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-25-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: qserdes-com-v4: add missing registersDmitry Baryshkov3-2/+188
Add missing registers, verified against: - msm-4.19's qcom,kona-qmp-usb3.h The 0x1a0 register name was corrected, verified via msm-4.14's qcom,sdxprairie-qmp-usb3.h. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-24-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: qserdes-com-v3: add missing registersDmitry Baryshkov2-0/+28
Add missing registers, verified against: - msm-4.4's phy-qcom-ufs-qmp-v3.h Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-23-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: qserdes-com: add missing registersDmitry Baryshkov3-2/+220
Add missing registers, verified against: - msm-3.18's phy-qcom-ufs-qmp-14nm.h - msm-3.18's mdss-hdmi-pll-8996.c - msm-5.4's ep_pcie_phy.h Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-22-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: split PCS_UFS V3 symbols to separate headerDmitry Baryshkov5-17/+28
Several registers defined in the PCS V3 namespace in reality belong to the PCS_UFS V3 register space. Move them to the separate header and rename them to explicitly mention PCS_UFS. While we are at it, correct one register in the msm8998_usb3_pcs_tbl table to use PCS register name. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-21-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: split allegedly 4.20 and 5.20 PCS registersDmitry Baryshkov4-22/+54
Split registers definitions belonging allegedly to 4.20 and 5.20 QMP PHYs. They are used for the PCIe QMP PHYs, which have no good open source reference. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-20-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: split allegedly 4.20 and 5.20 TX/RX registersDmitry Baryshkov3-86/+105
Split registers definitions belonging allegedly to 4.20 and 5.20 QMP PHYs. They are used for the PCIe QMP PHYs, which have no good open source reference. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-19-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: move PCIE QHP registers to separate headerDmitry Baryshkov2-114/+125
Move PCIE QHP registers to the separate header. QHP is a sepecial PHY kind used on sdm845 to drive one of PCIe links. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-18-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: move PCS V5 registers to separate headersDmitry Baryshkov5-58/+101
Move PCS V5 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-17-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: move PCS V4 registers to separate headersDmitry Baryshkov5-187/+228
Move PCS V4 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-16-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: move PCS V3 registers to separate headersDmitry Baryshkov3-70/+91
Move PCS V3 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-15-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: move PCS V2 registers to separate headerDmitry Baryshkov2-28/+39
Move PCS V2 registers to the separate header. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-14-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: move QSERDES PLL registers to separate headerDmitry Baryshkov2-57/+67
Move QSERDES PLL registers to the separate header. This register set is unique for the IPQ PCIe Gen3 PHYs. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-13-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: move QSERDES V5 registers to separate headersDmitry Baryshkov3-130/+152
Move QSERDES V5 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-12-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: move QSERDES V4 registers to separate headersDmitry Baryshkov3-151/+173
Move QSERDES V4 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-11-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: move QSERDES V3 registers to separate headersDmitry Baryshkov3-133/+156
Move QSERDES V3 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-10-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: move QSERDES registers to separate headerDmitry Baryshkov3-109/+130
Move QSERDES V2 registers to the separate header. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-9-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: use QPHY_V4_PCS for ipq6018/ipq8074 PCIe gen3Dmitry Baryshkov2-74/+41
PCS_COM_* symbols duplicate the QPHY_V4_PCS_*. PCS_PCIE_* symbols duplicate the QPHY_V4_PCS_PCIE_*. Use generic register names for the IPQ6018 and IPQ8074 tables and drop the custom PCS_COM_*/PCS_PCIE* names. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-8-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: rename QMP V2 PCS registersDmitry Baryshkov6-69/+69
Rename QMP V2 PCS registers to follow the usual pattern of QPHY_V2_PCS_*. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-7-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: drop special QMP V2 PCIE gen3 definesDmitry Baryshkov2-107/+67
Replace separate defines for QMP V2 PHY for PCIe gen3 ports. They are equivalent to the QSERDES_V4_ symbols. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-6-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp-pcie: split pcs_misc region for ipq6018 pcie gen3Dmitry Baryshkov2-16/+25
Follow the example of other PCIe PHYs and use separate pcs_misc region to access PCS_PCIE_* resources. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp-combo,usb: add support for separate PCS_USB regionDmitry Baryshkov3-108/+163
Different QMP USB PHYs might have different offset from PCS to PCS_USB register space, but the same PCS_USB register layout. Add separate PCS_USB region space and merge related PCS_USB definitions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp-ufs: remove spurious register write in the msm8996 tableDmitry Baryshkov1-1/+0
The msm8996_ufs_serdes_tbl table contains write to QPHY_POWER_DOWN_CONTROL, however this register doesn't belong to the QSERDES register space. Also the PHY power down is already handled in the qcom_qmp_phy_ufs_com_init(). Drop this entry completely. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: fix the QSERDES_V5_COM_CMN_MODE registerDmitry Baryshkov1-1/+2
Change QSERDES_V5_COM_CMN_MODE to be defined to 0x1a0 rather than 0x1a4. The only user of this register name (sm8450_qmp_gen4x2_pcie_serdes_tbl) should use the 0x1a0 register, as stated in the downstream dtsi tree. Fixes: 2c91bf6bf290 ("phy: qcom-qmp: Add SM8450 PCIe1 PHY support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-2-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: add regulator_set_load to dp phyKuogee Hsieh1-9/+32
This patch add regulator_set_load() before enable regulator at DP phy driver. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1657038556-2231-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06phy: qcom-edp: add regulator_set_load to edp phyKuogee Hsieh1-0/+12
This patch add regulator_set_load() before enable regulator at eDP phy driver. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1657038556-2231-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: amlogic: Add G12A Analog MIPI D-PHY driverNeil Armstrong3-0/+184
The Amlogic G12A SoCs embeds an Analog MIPI D-PHY used to communicate with DSI panels. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220705075650.3165348-3-narmstrong@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: phy-brcm-usb: drop unexpected word "the" in the commentsJiang Jian1-1/+1
there is an unexpected word "the" in the comments that need to be dropped file: ./drivers/phy/broadcom/phy-brcm-usb-init.c line: 864 * Make sure the the second and third memory controller changed to * Make sure the second and third memory controller Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220621122401.115500-1-jiangjian@cdjrlc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: rockchip-inno-usb2: Sync initial otg statePeter Geis1-0/+6
The initial otg state for the phy defaults to device mode. The actual state isn't detected until an ID IRQ fires. Fix this by syncing the ID state during initialization. Fixes: 51a9b2c03dd3 ("phy: rockchip-inno-usb2: Handle ID IRQ") Signed-off-by: Peter Geis <pgwipeout@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220622003140.30365-1-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: qcom-qmp-pcie: add IPQ8074 PCIe Gen3 QMP PHY supportRobert Marko1-0/+160
IPQ8074 has 2 different single lane PCIe PHY-s, one Gen2 and one Gen3. Gen2 one is already supported, so add the support for the Gen3 one. It uses the same register layout as IPQ6018. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220621195512.1760362-3-robimarko@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: qcom-qmp-pcie: make pipe clock rate configurableRobert Marko1-2/+12
IPQ8074 Gen3 PCIe PHY uses 250MHz as the pipe clock rate instead of 125MHz like every other PCIe QMP PHY does, so make it configurable as part of the qmp_phy_cfg. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220621195512.1760362-1-robimarko@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: qcom-qmp: clean up hex definesJohan Hovold1-8/+8
Use lower case hex consistently for define values. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220609120338.4080-4-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>