summaryrefslogtreecommitdiffstats
path: root/drivers/phy
AgeCommit message (Collapse)AuthorFilesLines
2016-07-31Merge tag 'mmc-v4.8' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds1-45/+196
Pull MMC updates from Ulf Hansson: "MMC core: - A couple of changes to improve the support for erase/discard/trim cmds - Add eMMC HS400 enhanced strobe support - Show OCR and DSR registers in SYSFS for MMC/SD cards - Correct and improve busy detection logic for MMC switch (CMD6) cmds - Disable HPI cmds for certain broken Hynix eMMC cards - Allow MMC hosts to specify non-support for SD and MMC cmds - Some minor additional fixes MMC host: - sdhci: Re-works, fixes and clean-ups - sdhci: Add HW auto re-tuning support - sdhci: Re-factor code to prepare for adding support for eMMC CMDQ - sdhci-esdhc-imx: Fixes and clean-ups - sdhci-esdhc-imx: Update system PM support - sdhci-esdhc-imx: Enable HW auto re-tuning - sdhci-bcm2835: Remove driver as sdhci-iproc is used instead - sdhci-brcmstb: Add new driver for Broadcom BRCMSTB SoCs - sdhci-msm: Add support for UHS cards - sdhci-tegra: Improve support for UHS cards - sdhci-of-arasan: Update phy support for Rockchip SoCs - sdhci-of-arasan: Deploy enhanced strobe support - dw_mmc: Some fixes and clean-ups - dw_mmc: Enable support for erase/discard/trim cmds - dw_mmc: Enable CMD23 support - mediatek: Some fixes related to the eMMC HS400 support - sh_mmcif: Improve support for HW busy detection - rtsx_pci: Enable support for erase/discard/trim cmds" * tag 'mmc-v4.8' of git://git.linaro.org/people/ulf.hansson/mmc: (135 commits) mmc: rtsx_pci: Remove deprecated create_singlethread_workqueue mmc: rtsx_pci: Enable MMC_CAP_ERASE to allow erase/discard/trim requests mmc: rtsx_pci: Use the provided busy timeout from the mmc core mmc: sdhci-pltfm: Drop define for SDHCI_PLTFM_PMOPS mmc: sdhci-pltfm: Convert to use the SET_SYSTEM_SLEEP_PM_OPS mmc: sdhci-pltfm: Make sdhci_pltfm_suspend|resume() static mmc: sdhci-esdhc-imx: Use common sdhci_suspend|resume_host() mmc: sdhci-esdhc-imx: Assign system PM ops within #ifdef CONFIG_PM_SLEEP mmc: sdhci-sirf: Remove non needed #ifdef CONFIG_PM* for dev_pm_ops mmc: sdhci-s3c: Remove non needed #ifdef CONFIG_PM for dev_pm_ops mmc: sdhci-pxav3: Remove non needed #ifdef CONFIG_PM for dev_pm_ops mmc: sdhci-of-esdhc: Simplify code by using SIMPLE_DEV_PM_OPS mmc: sdhci-acpi: Simplify code by using SET_SYSTEM_SLEEP_PM_OPS mmc: sdhci-pci-core: Simplify code by using SET_SYSTEM_SLEEP_PM_OPS mmc: Change the max discard sectors and erase response when HW busy detect phy: rockchip-emmc: Wait even longer for the DLL to lock phy: rockchip-emmc: Be tolerant to card clock of 0 in power on mmc: sdhci-of-arasan: Revert: Always power the PHY off/on when clock changes mmc: sdhci-msm: Add support for UHS cards mmc: sdhci-msm: Add set_uhs_signaling() implementation ...
2016-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-1/+124
Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ...
2016-07-26Merge branch 'for-4.8' of ↵Linus Torvalds1-0/+81
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "libata saw quite a bit of activities in this cycle: - SMR drive support still being worked on - bug fixes and improvements to misc SCSI command emulation - some low level driver updates" * 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits) libata-scsi: better style in ata_msense_*() AHCI: Clear GHC.IS to prevent unexpectly asserting INTx ata: sata_dwc_460ex: remove redundant dev_err call ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_* libata: remove ATA_PROT_FLAG_DATA libata: remove ata_is_nodata ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48} libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat libata-scsi: Fix ZBC management out command translation libata-scsi: Fix translation of REPORT ZONES command ata: Handle ATA NCQ NO-DATA commands correctly libata-eh: decode all taskfile protocols ata: fixup ATA_PROT_NODATA libsas: use ata_is_ncq() and ata_has_dma() accessors libata: use ata_is_ncq() accessors libata: return boolean values from ata_is_* libata-scsi: avoid repeated calculation of number of TRIM ranges libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control() libata-scsi: fix D_SENSE bit relection in control mode page ...
2016-07-25phy: rockchip-emmc: Wait even longer for the DLL to lockDouglas Anderson1-1/+11
Two times out of 2000 reboots I ran into the error message "rockchip_emmc_phy_power: dllrdy timeout". Presumably there is some corner case where the DLL just takes a little longer to timeout. Let's give it even more time to handle these corner cases. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25phy: rockchip-emmc: Be tolerant to card clock of 0 in power onDouglas Anderson1-22/+37
It's possible that there are some reasons to turn the PHY on while the clock is 0. In this case we just won't wait for the DLL to lock. This is a bit of a stopgap until we figure out exactly when we're supposed to wait for the DLL to lock and when we're supposed to power cycle the PHY. Note: this patch should help with suspend/resume where the system will try to turn the PHY back on when the clock is 0. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25phy: rockchip-emmc: Set phyctrl_frqsel based on card clockDouglas Anderson1-12/+89
The "phyctrl_frqsel" is described in the Arasan datasheet [1] as "the frequency range of DLL operation". Although the Rockchip variant of this PHY has different ranges than the reference Arasan PHY it appears as if the functionality is similar. We should set this phyctrl field properly. Note: as per Rockchip engineers, apparently the "phyctrl_frqsel" is actually only useful in HS200 / HS400 modes even though the DLL itself it used for some purposes in all modes. See the discussion in the earlier change in this series: ("mmc: sdhci-of-arasan: Always power the PHY off/on when clock changes"). In any case, it shouldn't hurt to set this always. Note that this change should allow boards to run at HS200 / HS400 speed modes while running at 100 MHz or 150 MHz. In fact, running HS400 at 150 MHz (giving 300 MB/s) is the main motivation of this series, since performance is still good but signal integrity problems are less prevelant at 150 MHz. [1]: https://arasan.com/wp-content/media/eMMC-5-1-Total-Solution_Rev-1-3.pdf Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25phy: rockchip-emmc: Minor code cleanup in rockchip_emmc_phy_power_on/off()Douglas Anderson1-12/+2
There's no reason to store the return value of rockchip_emmc_phy_power() in a variable nor to check it. Just return it. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25phy: rockchip-emmc: Increase lock time allowanceDouglas Anderson1-8/+20
Previous PHY code waited a fixed amount of time for the DLL to lock at power on time. Unfortunately, the time for the DLL to lock is actually a bit more dynamic and can be longer if the card clock is slower. Instead of waiting a fixed 30 us, let's now dynamically wait until the lock bit gets set. We'll wait up to 10 ms which should be OK even if the card clock is at the super slow 100 kHz. On its own, this change makes the PHY power on code a little more robust. Before this change the PHY was relying on the eMMC code to make sure the PHY was only powered on when the card clock was set to at least 50 MHz before, though this reliance wasn't documented anywhere. This change will be even more useful in future changes where we actually need to be able to wait for a DLL lock at slower clock speeds. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25phy: rockchip-emmc: reindent the register definitionsBrian Norris1-38/+38
Some of the spacing was wrong (spaces instead of tabs), and due to longer entries added later, the columns weren't aligned. Let's get everything consistent. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25phy: rockchip-emmc: configure default output tap delayBrian Norris1-0/+19
The output tap delay controls helps maintain the hold requirements for eMMC. The exact value is dependent on the SoC and other factors, though it isn't really an exact science. But the default of 0 is not very good, as it doesn't give the eMMC much hold time, so let's bump up to 4 (approx 90 degree phase?). If we need to configure this any further (e.g., based on board or speed factors), we may need to consider a device tree representation. Suggested-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25phy: rockchip-emmc: configure frequency range and drive impedanceShawn Lin1-0/+27
Signal integrity analysis has suggested we set these values. Do this in power_on(), so that they get reconfigured after suspend/resume. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25phy: rockchip-emmc: give DLL some extra time to be readyShawn Lin1-3/+4
According to the databook, 10.2us is the max time for dll to be ready to work. However in testing, some chips need 20us for dll to be ready. This patch adds some extra margin for dllrdy to be ready, fixing our -ETIMEDOUT issues. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-14Merge tag 'phy-for-4.8-rc1' of ↵Greg Kroah-Hartman10-26/+334
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing Kishon writes: phy: for 4.8 -rc1 *) Add a new phy_ops for setting the phy mode *) Add a new phy driver for DA8xx SoC USB PHY *) Minor fixes and cleanups Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-26/+15
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en.h drivers/net/ethernet/mellanox/mlx5/core/en_main.c drivers/net/usb/r8152.c All three conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04Merge 4.7-rc6 into usb-nextGreg Kroah-Hartman6-26/+15
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-04phy: rcar-gen3-usb2: fix mutex_lock calling in interruptYoshihiro Shimoda1-4/+22
This patch fixes an issue that the extcon_set_cable_state_() is possible to cause "BUG: scheduling while atomic" because this driver calls extcon_set_cable_state_() in the interrupt handler and mutex_lock() is possible to be called by like the following call trace. So, this patch adds a workqueue function to resolve this issue. [ 9.706504] BUG: scheduling while atomic: systemd-journal/25893/0x00010303 [ 9.714569] Modules linked in: [ 9.717629] CPU: 0 PID: 25893 Comm: systemd-journal Not tainted 4.7.0-rc4+ #86 [ 9.724844] Hardware name: Renesas Salvator-X board based on r8a7795 (DT) [ 9.731624] Call trace: [ 9.734077] [<ffff0000080889f0>] dump_backtrace+0x0/0x1a8 [ 9.739470] [<ffff000008088bac>] show_stack+0x14/0x20 [ 9.744520] [<ffff000008348ab4>] dump_stack+0x94/0xb8 [ 9.749568] [<ffff0000080da18c>] __schedule_bug+0x44/0x58 [ 9.754966] [<ffff0000087c6394>] __schedule+0x4e4/0x598 [ 9.760185] [<ffff0000087c6484>] schedule+0x3c/0xa8 [ 9.765057] [<ffff0000087c6928>] schedule_preempt_disabled+0x20/0x38 [ 9.771408] [<ffff0000080f20dc>] mutex_optimistic_spin+0x18c/0x1d0 [ 9.777583] [<ffff0000087c7ef0>] __mutex_lock_slowpath+0x38/0x140 [ 9.783669] [<ffff0000087c803c>] mutex_lock+0x44/0x60 [ 9.788717] [<ffff00000834ca48>] kobject_uevent_env+0x250/0x500 [ 9.794634] [<ffff0000086ae8c0>] extcon_update_state+0x220/0x298 [ 9.800634] [<ffff0000086ae9d8>] extcon_set_cable_state_+0x78/0x88 [ 9.806812] [<ffff000008376004>] rcar_gen3_device_recognition+0x5c/0xe0 [ 9.813420] [<ffff0000083761bc>] rcar_gen3_phy_usb2_irq+0x3c/0x48 [ 9.819509] [<ffff0000080fae94>] handle_irq_event_percpu+0x94/0x140 [ 9.825769] [<ffff0000080faf88>] handle_irq_event+0x48/0x78 [ 9.831334] [<ffff0000080fe620>] handle_fasteoi_irq+0xb8/0x1b0 [ 9.837162] [<ffff0000080fa3c4>] generic_handle_irq+0x24/0x38 [ 9.842900] [<ffff0000080fa6fc>] __handle_domain_irq+0x5c/0xb8 [ 9.848727] [<ffff000008081520>] gic_handle_irq+0x58/0xb0 Reported-by: Simon Horman <horms@verge.net.au> Fixes: 2b38543c8db1 ("phy: rcar-gen3-usb2: add extcon support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-04phy: rockhip-usb: use devm_add_action_or_reset()Sudip Mukherjee1-5/+3
If devm_add_action() fails we are explicitly calling the cleanup to free the resources allocated. Lets use the helper devm_add_action_or_reset() and return directly in case of error, as we know that the cleanup function has been already called by the helper if there was any error. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-04phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31Hans de Goede1-10/+24
The A31 companion pmic (axp221) does not generate vbus change interrupts when the board is driving vbus, so we must poll when using the pmic for vbus-det _and_ we're driving vbus. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-04phy: phy-qcom-ufs-qmp-14nm: Remove site specific OOM error messagePeter Griffin1-1/+0
kzalloc will issue its own error message including a dump_stack() so remote the site specific message. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-04phy: phy-qcom-ufs-qmp-20nm: Remove site specific OOM error messagePeter Griffin1-1/+0
kzalloc will issue its own error message including a dump_stack() so remote the site specific message. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-04phy: rockchip-usb: should be a child device of the GRFHeiko Stuebner1-3/+12
The usb-phy is fully enclosed in the general register files (GRF). Therefore as seen from the device-tree it shouldn't be a separate platform-device but instead a sub-device of the GRF - using the simply-mfd mechanism. As the usb-phy is part of the kernel for some releases now, we keep the old (and now deprecated) binding for compatibility purposes. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-04phy: da8xx-usb: new driver for DA8xx SoC USB PHYDavid Lechner3-0/+256
This is a new phy driver for the SoC USB controllers on the TI DA8xx family of microcontrollers. The USB 1.1 PHY is just a simple on/off. The USB 2.0 PHY also allows overriding the VBUS and ID pins. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-04Merge tag 'phy-set-mode-v2' of ↵Kishon Vijay Abraham I2-2/+17
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into next Add new set_mode phy ops Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-04phy: Add set_mode callbackDavid Lechner1-0/+15
The initial use for this is for PHYs that have a mode related to USB OTG. There are several SoCs (e.g. TI OMAP and DA8xx) that have a mode setting in the USB PHY to override OTG VBUS and ID signals. Of course, the enum can be expaned in the future to include modes for other types of PHYs as well. Suggested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: David Lechner <david@lechnology.com>
2016-07-04phy: xgene: rename "enum phy_mode" to "enum xgene_phy_mode"Kishon Vijay Abraham I1-2/+2
No functional change. Rename "enum phy_mode" to "enum xgene_phy_mode" in xgene phy driver in preparation for adding set_mode callback in phy core. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Loc Ho <lho@apm.com>
2016-07-01Merge tag 'mfd-fixes-4.7.1' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull more MFD fixes from Lee Jones: "Apologies for missing these from the first pull request. Final patches fixing Reset API change" * tag 'mfd-fixes-4.7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: usb: dwc3: st: Use explicit reset_control_get_exclusive() API phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API phy: miphy28lp: Inform the reset framework that our reset line may be shared
2016-07-01Merge tag 'usb-4.7-rc6' of ↵Linus Torvalds4-23/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 4.7-rc6. Nothing major here, all are described in the shortlog below. All have been in linux-next with no reported issues" * tag 'usb-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: don't free bandwidth_mutex too early USB: EHCI: declare hostpc register as zero-length array phy-sun4i-usb: Fix irq free conditions to match request conditions phy: bcm-ns-usb2: checking the wrong variable phy-sun4i-usb: fix missing __iomem * phy: phy-sun4i-usb: Fix optional gpios failing probe phy: rockchip-dp: fix return value check in rockchip_dp_phy_probe() phy: rcar-gen3-usb2: fix unexpected repeat interrupts of VBUS change usb: common: otg-fsm: add license to usb-otg-fsm
2016-07-01phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() APILee Jones1-1/+1
We're making all reset line users specify whether their lines are shared with other IP or they operate them exclusively. In this case the line is exclusively used only by this IP, so use the *_exclusive() API accordingly. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-07-01phy: miphy28lp: Inform the reset framework that our reset line may be sharedLee Jones1-1/+2
On the STiH410 B2120 development board the MiPHY28lp shares its reset line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device (DRD). New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-30Merge tag 'mfd-fixes-4.7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fixes from Lee Jones: "Contained are some standard fixes and unusually an extension to the Reset API. Some of those changes are required to fix a bug introduced in -rc1, which introduces extra 'reset line checks' i.e. whether the line is shared or not. If a line is shared and the new *_shared() API is not used, the request fails with an error. This breaks USB in v4.7 for ST's platforms. Admittedly, there are some patches contained in our (MFD/Reset) immutable branch which are not true -fixes, but there isn't anything I can do about that. Rest assured though, there aren't any API 'changes'. Everything is the same from the consumer's perspective. - Use new reset_*_get_shared() variant to prevent reset line obtainment failure (Fixes commit 0b52297f2288: "reset: Add support for shared reset controls") - Fix unintentional switch() fall-through into error path - Fix uninitialised variable compiler warning" * tag 'mfd-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: da9053: Fix compiler warning message for uninitialised variable mfd: max77620: Fix FPS switch statements phy: phy-stih407-usb: Inform the reset framework that our reset line may be shared usb: dwc3: st: Inform the reset framework that our reset line may be shared usb: host: ehci-st: Inform the reset framework that our reset line may be shared usb: host: ohci-st: Inform the reset framework that our reset line may be shared reset: TRIVIAL: Add line break at same place for similar APIs reset: Supply *_shared variant calls when using *_optional APIs reset: Supply *_shared variant calls when using of_* API reset: Ensure drivers are explicit when requesting reset lines reset: Reorder inline reset_control_get*() wrappers
2016-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-9/+26
Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30phy: phy-stih407-usb: Inform the reset framework that our reset line may be ↵Lee Jones1-1/+1
shared On the STiH410 B2120 development board the ports on the Generic PHY share their reset lines with each other. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-24Merge tag 'phy-for-4.7-rc5' of ↵Greg Kroah-Hartman4-23/+11
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.7-rc5 *) Fix in sun4i-usb phy driver to properly handle the return value of gpiod_to_irq *) Fix a sparse warning in sun4i-usb phy driver *) Fix bcm-ns-usb2 phy driver to check the correct variable *) Fix spurious interrupts during VBUS change in rcar-gen3-usb2 phy driver Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-22phy-sun4i-usb: Fix irq free conditions to match request conditionsHans de Goede1-2/+2
commit 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") changed the condition under which irqs are requested, but omitted matching changes to sun4i_usb_phy_remove(). This commit fixes this. Fixes: 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-21usb: gadget: move gadget API functions to udc-coreFelipe Balbi1-0/+1
instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-17phy: bcm-ns-usb2: checking the wrong variableDan Carpenter1-2/+2
We intended to test "usb2->phy" here instead of "dev". Fixes: d3feb4067335 ('phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-17phy-sun4i-usb: fix missing __iomem *Ben Dooks1-1/+1
Fix the missing __iomem attribute in sun4i_usb_phy_write() function. This fixes the following sparse warnings: drivers/phy/phy-sun4i-usb.c:178:39: warning: incorrect type in initializer (different address spaces) drivers/phy/phy-sun4i-usb.c:178:39: expected void *phyctl drivers/phy/phy-sun4i-usb.c:178:39: got void [noderef] <asn:2>* drivers/phy/phy-sun4i-usb.c:185:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:185:17: expected void volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:185:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:189:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:189:24: expected void const volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:189:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:196:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:196:17: expected void volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:196:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:199:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:199:24: expected void const volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:199:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:205:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:205:17: expected void volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:205:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:208:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:208:24: expected void const volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:208:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:210:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:210:17: expected void volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:210:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:212:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:212:24: expected void const volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:212:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:214:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:214:17: expected void volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:214:17: got void *phyctl Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-17phy: phy-sun4i-usb: Fix optional gpios failing probeQuentin Schulz1-4/+4
The interrupt 0 is not a valid interrupt number. In the event where the retrieval of the vbus-det gpio would return null, the gpiod_to_irq callback would return 0, while the current code makes the assumption that it is a valid interrupt, and would go on calling request_irq. Obviously, this would fail, preventing the driver from probing properly, while the vbus and id gpios are optional. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-17phy: rockchip-dp: fix return value check in rockchip_dp_phy_probe()Wei Yongjun1-1/+1
In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-17phy: rcar-gen3-usb2: fix unexpected repeat interrupts of VBUS changeYoshihiro Shimoda1-13/+1
This patch fixes an issue that the driver is possible to cause unexpected repeat interrupts if a board condition is wrong (e.g. even if the ID pin is as function, a board supplies the VBUS.) The reason why unexpected repeat interrupts happen is: 1) The driver changed the mode to function if it detected the ID pin is high and the VBUS is high. 2) After the driver changed function mode, it disabled the "VBUS control" feature. Then, the VBUS signal will be low. 3) Since the VBUS change interruption happened, the driver checked the ID pin and VBUS. 4) Since VBUS was low, the driver changed the mode to host and enabled the "VBUS control" feature. Then the VBUS signal will be high. 5) Since the VBUS change interruption happened, the driver did 1) above. So, this patch modified the condition in rcar_gen3_device_recognition() to check the ID pin only. Fixes: 1114e2d (phy: rcar-gen3-usb2: change the mode to OTG on the combined channel) Cc: <stable@vger.kernel.org> # v4.5+ Reported-by: Simon Horman <horms@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-16phy: Add SATA3 PHY support for Broadcom NSP SoCYendapally Reddy Dhananjaya Reddy1-0/+81
This patch adds support for Broadcom NSP SATA3 PHY in existing Broadcom SATA PHY driver. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-10phy: Add Northstar2 PCI Phy supportPramod Kumar3-1/+124
Add PCI Phy support for Broadcom Northstar2 SoCs. This driver uses the interface from the iproc mdio mux driver to enable the devices respective phys. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10Merge tag 'phy-for-4.7-rc' of ↵Greg Kroah-Hartman2-5/+16
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.7-rc *) Fix compiler warning in exynos-mipi-video *) Fix in ti-pipe3 PHY to program the DPLL even if it was already locked Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-03phy: ti-pipe3: Program the DPLL even if it was already lockedRoger Quadros1-4/+11
If bootloader has set a wrong DPLL then we must trash those values and re-program it anyways. This fixes USB3 devices not being enumerated on beagle-x15 if usb was started in u-boot. We don't re-program SATA DPLL if it is locked as it was causing SATA failures if device was hotpluged after boot. Reported-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-01usb: musb: Return error value from musb_mailboxTony Lindgren1-4/+10
At least on n900 we have phy-twl4030-usb only generating cable interrupts, and then have a separate USB PHY. In order for musb to know the real cable status, we need to clear any cached state until musb is ready. Otherwise the cable status interrupts will get just ignored if the status does not change from the initial state. To do this, let's add a return value to musb_mailbox(), and reset cached linkstat to MUSB_UNKNOWN on error. Sorry to cause a bit of churn here, I should have added that already last time patching musb_mailbox(). Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-30phy: exynos-mipi-video: avoid uninitialized variable useArnd Bergmann1-1/+5
A rework of the exynos-mipi-video driver caused a warning about the new __set_phy_state function potentially accessing a variable before its initialization: drivers/phy/phy-exynos-mipi-video.c: In function '__set_phy_state': drivers/phy/phy-exynos-mipi-video.c:238:13: error: 'val' may be used uninitialized in this function [-Werror=maybe-uninitialized] return val & data->resetn_val; ~~~~^~~~~~~~~~~~~~~~~~ drivers/phy/phy-exynos-mipi-video.c:235:6: note: 'val' was declared here u32 val; The failure scenario here is the offset passed into a the stub regmap_read() function that does not modify its output, however regmap_read() can also fail for other reasons, so adding error handling (in this case, returning zero from is_running) seems the best solution. Note that this warning showed up with the ARM s5pv210_defconfig, indicating that we most likely want to either enable CONFIG_REGMAP in that defconfig as well, or disable the phy-exynos-mipi-video driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 97a3042f7616 ("phy: exynos-mipi-video: Rewrite handling of phy registers") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-05-20Merge tag 'usb-4.7-rc1' of ↵Linus Torvalds10-372/+952
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big pull request for USB and PHY drivers for 4.7-rc1 Full details in the shortlog, but it's the normal major gadget driver updates, phy updates, new usbip code, as well as a bit of lots of other stuff. All have been in linux-next with no reported issues" * tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (164 commits) USB: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support USB: serial: fix minor-number allocation USB: serial: quatech2: fix use-after-free in probe error path USB: serial: mxuport: fix use-after-free in probe error path USB: serial: keyspan: fix debug and error messages USB: serial: keyspan: fix URB unlink USB: serial: keyspan: fix use-after-free in probe error path USB: serial: io_edgeport: fix memory leaks in probe error path USB: serial: io_edgeport: fix memory leaks in attach error path usb: Remove unnecessary space before operator ','. usb: Remove unnecessary space before open square bracket. USB: FHCI: avoid redundant condition usb: host: xhci-rcar: Avoid long wait in xhci_reset() usb/host/fotg210: remove dead code in create_sysfs_files usb: wusbcore: Do not initialise statics to 0. usb: wusbcore: Remove space before ',' and '(' . USB: serial: cp210x: clean up CRTSCTS flag code USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code USB: serial: cp210x: fix hardware flow-control disable USB: serial: option: add even more ZTE device ids ...
2016-05-18Merge tag 'armsoc-drivers' of ↵Linus Torvalds9-6/+5301
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons. For the most part, this is now related to power management controllers, which have not yet been abstracted into a separate subsystem, and typically require some code in drivers/soc or arch/arm to control the power domains. Another large chunk here is a rework of the NVIDIA Tegra USB3.0 support, which was surprisingly tricky and took a long time to get done. Finally, reset controller handling as always gets merged through here as well" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) arm-ccn: Enable building as module soc/tegra: pmc: Add generic PM domain support usb: xhci: tegra: Add Tegra210 support usb: xhci: Add NVIDIA Tegra XUSB controller driver dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding PCI: tegra: Support per-lane PHYs dt-bindings: pci: tegra: Update for per-lane PHYs phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs drivers: firmware: psci: make two helper functions inline soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas ...
2016-05-03Merge tag 'phy-for-4.7' of ↵Greg Kroah-Hartman10-371/+950
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing Kishon writes: phy: for 4.7 *) Add a new PHY driver for USB2 PHY on Northstar SoC *) Add support for Broadcom NS2 SATA3 PHY in existing Broadcom SATA3 PHY driver *) Add support for MIPI DPHYs in Exynos5420-compatible (5420, 5422 and 5800) and Exynos5433 SoCs *) Add support for USB3 PHY on mt2701 *) Add extcon support for Renesas R-car USB2 PHY driver *) Misc cleanups Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30phy: exynos-mipi-video: Add support for Exynos 5420 and 5433 SoCsMarek Szyprowski1-1/+128
This patch adds support for MIPI DPHYs found in Exynos5420-compatible (5420, 5422 and 5800) and Exynos5433 SoCs. Those SoCs differs from earlier by different offset of MIPI DPHY registers in PMU controllers (Exynos 5420-compatible case) or by moving MIPI DPHY reset registers to separate system register controllers (Exynos 5433 case). In both case also additional 5th PHY (MIPI CSIS 2) has been added. Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>