summaryrefslogtreecommitdiffstats
path: root/drivers/phy
AgeCommit message (Collapse)AuthorFilesLines
2020-07-08Merge tag 'phy-fixes-5.8' of ↵Greg Kroah-Hartman5-16/+19
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy: fixes for 5.8 *) Fix for intel combo driver for warns or errors *) Constify symbols for am654-serdes & j721e-wiz *) Return value fix for rockchip driver *) Null pointer dereference fix for sun4i-usb * tag 'phy-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: sun4i-usb: fix dereference of pointer phy0 before it is null checked phy: rockchip: Fix return value of inno_dsidphy_probe() phy: ti: j721e-wiz: Constify structs phy: ti: am654-serdes: Constify regmap_config phy: intel: fix enum type mismatch warning phy: intel: Fix compilation error on FIELD_PREP usage
2020-06-25phy: sun4i-usb: fix dereference of pointer phy0 before it is null checkedColin Ian King1-2/+3
Currently pointer phy0 is being dereferenced via the assignment of phy on the call to phy_get_drvdata before phy0 is null checked, this can lead to a null pointer dereference. Fix this by performing the null check on phy0 before the call to phy_get_drvdata. Also replace the phy0 == NULL check with the more usual !phy0 idiom. Addresses-Coverity: ("Dereference before null check") Fixes: e6f32efb1b12 ("phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200625124428.83564-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24phy: rockchip: Fix return value of inno_dsidphy_probe()Tiezhu Yang1-2/+2
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: b7535a3bc0ba ("phy/rockchip: Add support for Innosilicon MIPI/LVDS/TTL PHY") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/1590412138-13903-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24phy: ti: j721e-wiz: Constify structsRikard Falkeborn1-5/+5
clk_div_table and wiz_regmap_config are not modified and can therefore be made const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 20265 7044 64 27373 6aed drivers/phy/ti/phy-j721e-wiz.o After: text data bss dec hex filename 20649 6660 64 27373 6aed drivers/phy/ti/phy-j721e-wiz.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200524095516.25227-3-rikard.falkeborn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24phy: ti: am654-serdes: Constify regmap_configRikard Falkeborn1-1/+1
regmap_config is not modified and can be made static to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 12328 3644 64 16036 3ea4 drivers/phy/ti/phy-am654-serdes.o After: text data bss dec hex filename 12648 3324 64 16036 3ea4 drivers/phy/ti/phy-am654-serdes.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200524095516.25227-2-rikard.falkeborn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24phy: intel: fix enum type mismatch warningArnd Bergmann1-1/+3
clang points out that a local variable is initialized with an enum value of the wrong type: drivers/phy/intel/phy-intel-combo.c:202:34: error: implicit conversion from enumeration type 'enum intel_phy_mode' to different enumeration type 'enum intel_combo_mode' [-Werror,-Wenum-conversion] enum intel_combo_mode cb_mode = PHY_PCIE_MODE; ~~~~~~~ ^~~~~~~~~~~~~ >From reading the code, it seems that this was not only the wrong type, but not even supposed to be a code path that can happen in practice. Change the code to have no default phy mode but instead return an error for invalid input. Fixes: ac0a95a3ea78 ("phy: intel: Add driver support for ComboPhy") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dilip Kota <eswara.kota@linux.intel.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20200527134518.908624-1-arnd@arndb.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24phy: intel: Fix compilation error on FIELD_PREP usageDilip Kota1-5/+5
FIELD_PREP expects constant arguments. Istead of doing FIELD_PREP operation on the arguments of combo_phy_w32_off_mask(), pass the final FIELD_PREP value as an argument. Error reported as: In file included from include/linux/build_bug.h:5, from include/linux/bitfield.h:10, from drivers/phy/intel/phy-intel-combo.c:8: drivers/phy/intel/phy-intel-combo.c: In function 'combo_phy_w32_off_mask': include/linux/bitfield.h:52:28: warning: comparison is always false due to limited range of data type [-Wtype-limits] include/linux/compiler.h:350:38: error: call to '__compiletime_assert_37' declared with attribute error: FIELD_PREP: mask is not constant 94 | __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); | ^~~~~~~~~~~~~~~~ drivers/phy/intel/phy-intel-combo.c:137:13: note: in expansion of macro 'FIELD_PREP' 137 | reg_val |= FIELD_PREP(mask, val); | ^~~~~~~~~~ ../include/linux/compiler.h:392:38: error: call to__compiletime_assert_137 declared with attribute error: BUILD_BUG_ON failed: (((mask) + (1ULL << (__builtin_ffsll(mask) - 1))) & (((mask) + (1ULL << (__builtin_ffsll(mask) - 1))) - 1)) != 0 _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ../include/linux/bitfield.h:94:3: note: in expansion of macro __BF_FIELD_CHECK __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \ ^~~~~~~~~~~~~~~~ ../drivers/phy/intel/phy-intel-combo.c:137:13: note: in expansion of macro FIELD_PREP reg_val |= FIELD_PREP(mask, val); ^~~~~~~~~~ Fixes: ac0a95a3ea78 ("phy: intel: Add driver support for ComboPhy") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/8a309dd3c238efbaa59d1649704255d6f8b6c9c5.1590575358.git.eswara.kota@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-15phy: samsung: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-05-25Merge tag 'usb-for-v5.8' of ↵Greg Kroah-Hartman3-296/+0
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.8 merge window Rather busy cycle. We have a total 99 non-merge commits going into v5.8 merge window. The majority of the changes are in dwc3 this around (31.7% of all changes). It's composed mostly Thinh's recent updates to get dwc3 to behave correctly with stream transfers. We have also have Roger's for Keystone platforms and Neil's updates for the meson glue layer. Apart from those, we have the usual set of non-critical fixes, new device IDs, spelling fixes all over the place. Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits) usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML usb: dwc3: gadget: Check for prepared TRBs usb: gadget: Fix issue with config_ep_by_speed function usb: cdns3: ep0: delete the redundant status stage usb: dwc2: Update Core Reset programming flow. usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe() usb: gadget: fix potential double-free in m66592_probe. usb: cdns3: Fix runtime PM imbalance on error usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check usb: dwc3: Increase timeout for CmdAct cleared by device controller USB: dummy-hcd: use configurable endpoint naming scheme usb: cdns3: gadget: assign interrupt number to USB gadget structure usb: gadget: core: sync interrupt before unbind the udc arm64: dts: qcom: sc7180: Add interconnect properties for USB arm64: dts: qcom: sdm845: Add interconnect properties for USB dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver ARM: dts: at91: Remove the USB EP child node dt-bindings: usb: atmel: Mark EP child node as deprecated ...
2020-05-25phy: amlogic: meson-gxl-usb3: remove code for non-existing PHYMartin Blumenstingl3-296/+0
The registers which are managed by the meson-gxl-usb3 PHY driver are actually "USB control" registers (which are "glue" registers which manage OTG detection and routing of the OTG capable port between the DWC2 peripheral-only controller and the DWC3 host-only controller). Drop the meson-gxl-usb3 PHY driver now that the dwc3-meson-g12a-usb driver supports the USB control registers on GXL and GXM SoCs (these were previously managed by the meson-gxl-usb3 PHY driver). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-22Merge tag 'phy-for-5.8' of ↵Greg Kroah-Hartman23-185/+2233
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-next Kishon writes: phy: for 5.8 *) Add new PHY driver to support Cadence SALVO PHY which supports USB3 & USB2 *) Add new PHY driver to support Intel ComboPhy which supports PCIe, SATA and EMAC *) Add new PHY driver for Qualcomm IPQ40xx USB PHY *) Add new PHY driver for Synopsys FemtoPHY V2 driver used in Qualcomm SOCs *) Add support for Qualcomm SM8250 UFS PHY and SM8150 QMP USB3 PHY in qcom-qmp-phy driver *) Add support for Amlogic USB2 PHY on Meson8m2 in phy-meson8b-usb2 driver *) Add DisplayPort mode support in Wiz (TI Cadence PHY wrapper), to enable eDP in TI's J721E SoC *) Add support for super speed USB PHY in TI's AM654 SoC *) Add fix in Broadcom Stingray USB PHY to get USB PHY PLL lock reliably *) Add fix in Samsung phy-s5pv210-usb2 to get USB working on s5pv210 *) Add fix in Amlogic phy-meson8b-usb2 to get host only mode working on Meson8 *) Add fix in Cadence phy-cadence-sierra to get USB3 device disconnect issue *) Convert meson8b-usb2-phy, qcom-qmp-phy, rcar-gen3-phy-usb2 and rcar-gen3-phy-usb3 device tree binding to YAML schema *) Minor fixes and cleanups in phy-cpcap-usb, j721e-wiz, omap-usb2, phy-bcm-sr-usb, phy-brcm-usb PHY driver Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits) phy: intel: Add driver support for ComboPhy dt-bindings: phy: Add YAML schemas for Intel ComboPhy dt-bindings: phy: Add PHY_TYPE_XPCS definition phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180 dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SC7180 dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml phy: cadence: sierra: Fix for USB3 U1/U2 state phy: ti: am654: add support for USB super-speed phy: ti: am654: show up in regmap debugfs drivers: phy: sr-usb: do not use internal fsm for USB2 phy init dt-bindings: phy: renesas: usb3-phy: add r8a77961 support dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema dt-bindings: phy: renesas: usb2-phy: add r8a77961 support dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema phy: qcom-qmp: Ensure register indirection arrays initialized phy: omap-usb2: Clean up exported header phy: phy-bcm-ns2-usbdrd: Constify phy_ops phy: phy-brcm-usb: Constify static structs phy: sr-usb: Constify phy_ops ...
2020-05-19phy: intel: Add driver support for ComboPhyDilip Kota3-0/+647
ComboPhy subsystem provides PHYs for various controllers like PCIe, SATA and EMAC. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/7b313826f46b9006a3ba98c0613e8f88f293a074.1589868358.git.eswara.kota@linux.intel.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-19phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180Sandeep Maheswaram1-0/+38
Adding QMP v3 USB3 PHY support for SC7180. Adding only usb phy reset in the list to avoid reset of DP block. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1589510358-3865-5-git-send-email-sanm@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-18phy: cadence: sierra: Fix for USB3 U1/U2 stateSanket Parmar1-13/+14
Updated values of USB3 related Sierra PHY registers. This change fixes USB3 device disconnect issue observed while enternig U1/U2 state. Signed-off-by: Sanket Parmar <sparmar@cadence.com> Link: https://lore.kernel.org/r/1589804053-14302-1-git-send-email-sparmar@cadence.com Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18phy: ti: am654: add support for USB super-speedRoger Quadros1-2/+101
The SERDES PHY can support USB super-speed lane. Add support for that. Signed-off-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200513131254.10497-3-rogerq@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18phy: ti: am654: show up in regmap debugfsRoger Quadros1-0/+1
The max_register property must be set in order to show up the registers in debugfs. Signed-off-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200513131254.10497-2-rogerq@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18drivers: phy: sr-usb: do not use internal fsm for USB2 phy initBharat Gooty1-53/+2
During different reboot cycles, USB PHY PLL may not always lock during initialization and therefore can cause USB to be not usable. Hence do not use internal FSM programming sequence for the USB PHY initialization. Fixes: 4dcddbb38b64 ("phy: sr-usb: Add Stingray USB PHY driver") Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Link: https://lore.kernel.org/r/20200513173947.10919-1-rayagonda.kokatanur@broadcom.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18phy: qcom-qmp: Ensure register indirection arrays initializedBjorn Andersson1-9/+11
It's possible that struct qmp_phy_cfg->regs references an array that is smaller than the possible register lookups that is going to be performed, with the resulting out-of-bounds read resulting in undefined behavior. One such example is when during qcom_qmp_phy_com_init() performs a qphy_setbits() on entry QPHY_PCS_POWER_DOWN_CONTROL (i.e. 17) with msm8996_ufsphy_regs_layout only being 12 entries long. Solve this by inflating all "regs_layout" arrays to ensure that any remaining entries are zero-initialized, as expected by the code. Fixes: e4d8b05ad5f9 ("phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200515013643.2081941-1-bjorn.andersson@linaro.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18phy: omap-usb2: Clean up exported headerRoger Quadros1-4/+56
Move private definitions from header to phy-omap-usb2.c file. Get rid of unused data structures usb_dpll_params and omap_usb_phy_type. Signed-off-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200515080518.26870-2-rogerq@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18phy: phy-bcm-ns2-usbdrd: Constify phy_opsRikard Falkeborn1-1/+1
phy_ops are never modified and can therefore be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 7831 3144 128 11103 2b5f drivers/phy/broadcom/phy-bcm-ns2-usbdrd.o After: text data bss dec hex filename 7959 3016 128 11103 2b5f drivers/phy/broadcom/phy-bcm-ns2-usbdrd.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200516120441.7627-2-rikard.falkeborn@gmail.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18phy: phy-brcm-usb: Constify static structsRikard Falkeborn1-8/+8
A number of structs were not modified and can therefore be made const to allow the compiler to put them in read-only memory. In order to do so, update a few functions that don't modify there input to take pointers to const. Before: text data bss dec hex filename 15511 6448 64 22023 5607 drivers/phy/broadcom/phy-brcm-usb.o After: text data bss dec hex filename 16058 5936 64 22058 562a drivers/phy/broadcom/phy-brcm-usb.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200516120441.7627-4-rikard.falkeborn@gmail.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18phy: sr-usb: Constify phy_opsRikard Falkeborn1-1/+1
phy_ops are never modified and can therefore be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 4310 1244 0 5554 15b2 drivers/phy/broadcom/phy-bcm-sr-usb.o After: text data bss dec hex filename 4438 1116 0 5554 15b2 drivers/phy/broadcom/phy-bcm-sr-usb.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200516120441.7627-3-rikard.falkeborn@gmail.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-15phy: phy-cadence-salvo: add phy .init APIPeter Chen1-1/+11
The .init is used for one-time PHY's initialization, and .power_on is called many times during the device lifecycle. Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200513125605.5545-1-peter.chen@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-15phy: amlogic: meson8b-usb2: Add a compatible string for Meson8m2Martin Blumenstingl2-2/+6
The 3.10 vendor kernel sets the ACA_ENABLE bit on Meson8b, Meson8m2 and GXBB, but not on Meson8. Add a compatible string for Meson8m2 which also sets that bit. While here, also update the Kconfig text and MODULE_DESCRIPTION. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Link: https://lore.kernel.org/r/20200512222424.549351-7-martin.blumenstingl@googlemail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-15phy: amlogic: meson8b-usb2: unset the IDDQ bit during PHY power-onMartin Blumenstingl1-12/+32
The vendor driver unsets the set_iddig bit during power-on as well and sets it when suspending the PHY. I did not notice this in the vendor driver first, because it's part of the dwc_otg driver there (instead of their PHY code). While here, also add all other REG_DBG_UART register bit definitions. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Link: https://lore.kernel.org/r/20200512222424.549351-6-martin.blumenstingl@googlemail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-15phy: amlogic: meson8b-usb2: Don't set REG_ADP_BC_ACA_ENABLE on Meson8Martin Blumenstingl1-10/+38
Skip setting REG_ADP_BC_ACA_ENABLE on Meson8 SoCs and polling for the REG_ADP_BC_ACA_PIN_FLOAT bit. The vendor also skips this part on Meson8 SoCs. This fixes initialization of the host-only USB PHY on Meson8 which would otherwise fail with "USB ID detect failed!". Fixes: 4a3449d1a0a10c ("phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs") Reported-by: Thomas Graichen <thomas.graichen@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Link: https://lore.kernel.org/r/20200512222424.549351-5-martin.blumenstingl@googlemail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-15phy: amlogic: meson8b-usb2: Use a MMIO regmapMartin Blumenstingl2-39/+35
Using a MMIO regmap and switch to regmap_update_bits() to simplify the code in the driver. Also switch to devm_platform_ioremap_resource() instead of open-coding it. No functional changes intended. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Link: https://lore.kernel.org/r/20200512222424.549351-4-martin.blumenstingl@googlemail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-13phy: intel-lgm-emmc: Add architecture dependencyGeert Uytterhoeven1-0/+1
The Intel eMMC PHY is only present on Intel Lightning Mountain SoCs. Add an architecture dependency to the PHY_INTEL_EMMC config symbol, to avoid asking the user about it when configuring a kernel for a non-x86 architecture. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200507113626.24026-3-geert+renesas@glider.be Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-13phy: ti: j721e-wiz: Fix some error return code in wiz_probe()Wei Yongjun1-1/+5
Fix to return negative error code from some error handling cases instead of 0, as done elsewhere in this function. Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200507054109.110849-1-weiyongjun1@huawei.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-13phy: cpcap-usb: Remove some useless codeChristophe JAILLET1-2/+0
Axe a clk that is unused in the driver. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200507203127.202197-1-christophe.jaillet@wanadoo.fr Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-13phy: samsung: s5pv210-usb2: Add delay after resetJonathan Bakker1-0/+4
The USB phy takes some time to reset, so make sure we give it to it. The delay length was taken from the 4x12 phy driver. This manifested in issues with the DWC2 driver since commit fe369e1826b3 ("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.") where the endianness check would read the DWC ID as 0 due to the phy still resetting, resulting in the wrong endian mode being chosen. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/BN6PR04MB06605D52502816E500683553A3D10@BN6PR04MB0660.namprd04.prod.outlook.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-07phy: cadence: salvo: add salvo phy driverPeter Chen3-0/+325
Cadence SALVO PHY is a 28nm product, and is only used for USB3 & USB2. According to the Cadence, this PHY is a legacy Module, and Sierra and Torrent are later evolutions from it, and their sequence overlap is minimal, meaning we cannot reuse either (Sierra & Torrent) of the PHY drivers. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-05phy: qcom-qmp: Rename UFS PCS QMP v4 registersWesley Cheng2-30/+30
The UFS QMP v4 PHY has a largely different register set versus USB and PCIe. Rename the register offsets to denote that the value is specific for the UFS PCS register. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1588636467-23409-6-git-send-email-wcheng@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USBWesley Cheng1-4/+19
The register map for SM8150 QMP USB SSPHY has moved QPHY_POWER_DOWN_CONTROL to a different offset. Allow for an offset in the register table to override default value if it is a DP capable PHY. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Reviewed-by: Manu Gautam <mgautam@codeaurora.org> Link: https://lore.kernel.org/r/1588636467-23409-5-git-send-email-wcheng@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05phy: qcom-qmp: Add SM8150 QMP USB3 PHY supportJack Pham2-2/+348
Add support for SM8150 QMP USB3 PHY with the necessary initialization sequences as well as additional QMP V4 register definitions. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Reviewed-by: Manu Gautam <mgautam@codeaurora.org> Link: https://lore.kernel.org/r/1588636467-23409-4-git-send-email-wcheng@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCsWesley Cheng3-0/+298
This adds the SNPS FemtoPHY V2 driver used in QCOM SOCs. There are potentially multiple instances of this UTMI PHY on the SOC, all which can utilize this driver. The V2 driver will have a different register map compared to V1. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Reviewed-by: Philipp Zabel <pza@pengutronix.de> Reviewed-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/1588636467-23409-3-git-send-email-wcheng@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-04phy: add driver for Qualcomm IPQ40xx USB PHYRobert Marko3-0/+156
Add a driver to setup the USB PHY-s on Qualcom m IPQ40xx series SoCs. The driver sets up HS and SS phys. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20200503201823.531757-1-robert.marko@sartura.hr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-30phy: qualcomm: usb-hs-28nm: Prepare clocks in initBjorn Andersson1-11/+21
The AHB clock must be on for qcom_snps_hsphy_init() to be able to write the initialization sequence to the hardware, so move the clock enablement to phy init and exit. Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-04-28phy: qcom: qmp: Add SM8250 UFS PHYBjorn Andersson1-0/+3
The SM8250 UFS PHY can run off the same initialization sequence as SM8150, but add the compatible to allow future changes. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-27phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat stringJohn Stultz1-0/+7
This patch fixes a regression in 5.7-rc1+ In commit 8fe75cd4cddf ("phy: qcom-qusb2: Add generic QUSB2 V2 PHY support"), the change was made to add "qcom,qusb2-v2-phy" as a generic compat string. However the change also removed the "qcom,sdm845-qusb2-phy" compat string, which is documented in the binding and already in use. This patch re-adds the "qcom,sdm845-qusb2-phy" compat string which allows the driver to continue to work with existing dts entries such as found on the db845c. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 8fe75cd4cddf ("phy: qcom-qusb2: Add generic QUSB2 V2 PHY support") Reported-by: YongQin Liu <yongqin.liu@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-04-24phy: ti: j721e-wiz: Implement DisplayPort mode to the wiz driverJyri Sarha1-4/+55
For DisplayPort use we need to set WIZ_CONFIG_LANECTL register's P_STANDARD_MODE bits to "mode 3". In the DisplayPort use also the P_ENABLE bits of the same register are set to P_ENABLE instead of P_ENABLE_FORCE, so that the DisplayPort driver can enable and disable the lane as needed. The DisplayPort mode is selected according to "cdns,phy-type"-properties found in link subnodes under the managed serdes (see "ti,sierra-phy-t0" and "ti,j721e-serdes-10g" devicetree bindings for details). All other values of "cdns,phy-type"-property but PHY_TYPE_DP will set P_STANDARD_MODE bits to 0 and P_ENABLE bits to force enable. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-04-24phy: tegra: Select USB_COMMON for usb_get_maximum_speed()Thierry Reding1-1/+2
The usb_get_maximum_speed() function is part of the usb-common module, so enable it by selecting the corresponding Kconfig symbol. While at it, also make sure to depend on USB_SUPPORT because USB_PHY requires that. This can lead to Kconfig conflicts if USB_SUPPORT is not enabled while attempting to enable PHY_TEGRA_XUSB. Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-04-16phy: tegra: Select USB_COMMON for usb_get_maximum_speed()Thierry Reding1-1/+2
The usb_get_maximum_speed() function is part of the usb-common module, so enable it by selecting the corresponding Kconfig symbol. While at it, also make sure to depend on USB_SUPPORT because USB_PHY requires that. This can lead to Kconfig conflicts if USB_SUPPORT is not enabled while attempting to enable PHY_TEGRA_XUSB. Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200330101038.2422389-1-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-03Merge tag 'pci-v5.7-changes' of ↵Linus Torvalds4-5/+409
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-03-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-3/+0
Pull networking updates from David Miller: "Highlights: 1) Fix the iwlwifi regression, from Johannes Berg. 2) Support BSS coloring and 802.11 encapsulation offloading in hardware, from John Crispin. 3) Fix some potential Spectre issues in qtnfmac, from Sergey Matyukevich. 4) Add TTL decrement action to openvswitch, from Matteo Croce. 5) Allow paralleization through flow_action setup by not taking the RTNL mutex, from Vlad Buslov. 6) A lot of zero-length array to flexible-array conversions, from Gustavo A. R. Silva. 7) Align XDP statistics names across several drivers for consistency, from Lorenzo Bianconi. 8) Add various pieces of infrastructure for offloading conntrack, and make use of it in mlx5 driver, from Paul Blakey. 9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki. 10) Lots of parallelization improvements during configuration changes in mlxsw driver, from Ido Schimmel. 11) Add support to devlink for generic packet traps, which report packets dropped during ACL processing. And use them in mlxsw driver. From Jiri Pirko. 12) Support bcmgenet on ACPI, from Jeremy Linton. 13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei Starovoitov, and your's truly. 14) Support XDP meta-data in virtio_net, from Yuya Kusakabe. 15) Fix sysfs permissions when network devices change namespaces, from Christian Brauner. 16) Add a flags element to ethtool_ops so that drivers can more simply indicate which coalescing parameters they actually support, and therefore the generic layer can validate the user's ethtool request. Use this in all drivers, from Jakub Kicinski. 17) Offload FIFO qdisc in mlxsw, from Petr Machata. 18) Support UDP sockets in sockmap, from Lorenz Bauer. 19) Fix stretch ACK bugs in several TCP congestion control modules, from Pengcheng Yang. 20) Support virtual functiosn in octeontx2 driver, from Tomasz Duszynski. 21) Add region operations for devlink and use it in ice driver to dump NVM contents, from Jacob Keller. 22) Add support for hw offload of MACSEC, from Antoine Tenart. 23) Add support for BPF programs that can be attached to LSM hooks, from KP Singh. 24) Support for multiple paths, path managers, and counters in MPTCP. From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti, and others. 25) More progress on adding the netlink interface to ethtool, from Michal Kubecek" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits) net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline cxgb4/chcr: nic-tls stats in ethtool net: dsa: fix oops while probing Marvell DSA switches net/bpfilter: remove superfluous testing message net: macb: Fix handling of fixed-link node net: dsa: ksz: Select KSZ protocol tag netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write net: stmmac: add EHL 2.5Gbps PCI info and PCI ID net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID net: stmmac: create dwmac-intel.c to contain all Intel platform net: dsa: bcm_sf2: Support specifying VLAN tag egress rule net: dsa: bcm_sf2: Add support for matching VLAN TCI net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT net: dsa: bcm_sf2: Disable learning for ASP port net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge net: dsa: b53: Prevent tagged VLAN on port 7 for 7278 net: dsa: b53: Restore VLAN entries upon (re)configuration net: dsa: bcm_sf2: Fix overflow checks hv_netvsc: Remove unnecessary round_up for recv_completion_cnt ...
2020-03-26phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phyGrygorii Strashko1-3/+0
The phy-gmii-sel can be only auto selected in Kconfig and now the pretty complex Kconfig dependencies are defined for phy-gmii-sel driver, which also need to be updated every time phy-gmii-sel is re-used for any new networking driver. Simplify Kconfig definition for phy-gmii-sel PHY driver - drop all dependencies and from networking drivers and rely on using 'imply PHY_TI_GMII_SEL' in Kconfig definitions for networking drivers instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21Merge tag 'phy-for-5.7' of ↵Greg Kroah-Hartman18-682/+3551
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 5.7 *) Rename and Re-design phy-cadence-dp driver to phy-cadence-torrent driver *) Add new PHY driver for Qualcomm 28nm Hi-Speed USB PHY *) Add new PHY driver for Qualcomm Super Speed PHY in QCS404 *) Add support for Qualcomm PCIe QMP/QHP PHY in SDM845 to phy-qcom-qmp driver *) Add support for Qualcomm UFS PHY in MSM8996 to phy-qcom-qmp driver *) Add support for an additional reference clock in Mediatek phy-mtk-tphy driver *) Add support for configuring tuning parameters in Mediatek phy-mtk-tphy driver *) Add support for GMII PHY in TI K3 AM654x/J721E SoCs to phy-gmii-sel driver *) Add support for USB2 PHY in Amlogic A1 SoC Family to phy-meson-g12a-usb2 driver *) Add support for USB3/USB2/PCIe PHY in Socionext Pro5 SoC to phy-uniphier-usb3ss/phy-uniphier-usb3hs/phy-uniphier-pcie driver respectively *) Add support for QUSB2 PHY in Qualcomm SC7180 in driver *) Convert dt-bindings of Cadence DP, Qualcomm QUSB2 to YAML format Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (52 commits) phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters phy: qcom-qusb2: Add generic QUSB2 V2 PHY support dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180 dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml phy: rk-inno-usb2: Decrease verbosity of repeating log. phy: amlogic: Add Amlogic A1 USB2 PHY Driver dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings phy: ti: gmii-sel: add support for am654x/j721e soc dt-bindings: phy: ti: gmii-sel: add support for am654x/j721e soc phy: qualcomm: usb: Add SuperSpeed PHY driver dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding dt-bindings: phy: remove qcom-dwc3-usb-phy phy: phy-mtk-tphy: add a new reference clock phy: phy-mtk-tphy: remove unused u3phya_ref clock phy: phy-mtk-tphy: make the ref clock optional phy: phy-mtk-tphy: add a property for internal resistance ...
2020-03-20phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHYSandeep Maheswaram1-0/+51
Added support for overriding bias-ctrl-value,charge-ctrl-value and hsdisc-trim-value params for QUSB2 V2 PHY Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHYSandeep Maheswaram1-32/+43
Added new structure for overriding tuning parameters in QUSB2 V2 PHY as the override params are increased due to usage of generic QUSB2 V2 phy table. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: qcom-qusb2: Add generic QUSB2 V2 PHY supportSandeep Maheswaram1-9/+9
Add generic QUSB2 V2 PHY table so the respective phys can use the same table. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 05:31:16 +0000