summaryrefslogtreecommitdiffstats
path: root/drivers/phy
AgeCommit message (Collapse)AuthorFilesLines
2014-08-08Merge tag 'drivers-for-3.17' of ↵Linus Torvalds4-8/+603
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "A handful of driver-related changes. We've had a bunch of them going in through other branches as well, so it's only a part of what we really have this release. Larger pieces are: - Removal of a now unused PWM driver for atmel [ This includes AVR32 changes that have been appropriately acked ] - Performance counter support for the arm CCN interconnect - OMAP mailbox driver cleanups and consolidation - PCI and SATA PHY drivers for SPEAr 13xx platforms - Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to better model regulators/power" Note: this merge also fixes up the semantic conflict with the new calling convention for devm_phy_create(), see commit f0ed817638b5 ("phy: core: Let node ptr of PHY point to PHY and not of PHY provider") that came in through Greg's USB tree. Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through the next tree. * tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: arm-ccn: Fix error handling at event allocation mailbox/omap: add a parent structure for every IP instance mailbox/omap: remove the private mailbox structure mailbox/omap: consolidate OMAP mailbox driver mailbox/omap: simplify the fifo assignment by using macros mailbox/omap: remove omap_mbox_type_t from mailbox ops mailbox/omap: remove OMAP1 mailbox driver mailbox/omap: use devm_* interfaces bus: ARM CCN: add PERF_EVENTS dependency bus: ARM CCN PMU driver PCI: spear: Remove spear13xx_pcie_remove() PCI: spear: Fix Section mismatch compilation warning for probe() ARM: tegra: Remove legacy PCIe power supply properties PCI: tegra: Remove deprecated power supply properties PCI: tegra: Implement accurate power supply scheme ARM: SPEAr13xx: Update defconfigs ARM: SPEAr13xx: Add pcie and miphy DT nodes ARM: SPEAr13xx: Add bindings and dt node for misc block ARM: SPEAr13xx: Fix static mapping table phy: Add drivers for PCIe and SATA phy on SPEAr13xx ...
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds5-0/+205
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-07-22phy: miphy365x: Represent each PHY channel as a DT subnodeLee Jones1-118/+138
This has the added advantages of being able to enable/disable each of the channels as simply as enabling/disabling the DT node. Suggested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: miphy365x: Provide support for the MiPHY356x Generic PHYLee Jones3-0/+627
The MiPHY365x is a Generic PHY which can serve various SATA or PCIe devices. It has 2 ports which it can use for either; both SATA, both PCIe or one of each in any configuration. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: qcom: Add driver for QCOM IPQ806x SATA PHYKumar Gala3-0/+219
Add a PHY driver for uses with AHCI based SATA controller driver on the IPQ806x family of SoCs. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: qcom-apq8064: fix possible timeout without checkSrinivas Kandagatla1-1/+1
This patch fixes a possible timeout in poll loop without actually checking the register before return. In theory the there is a possibility of loop being scheduled after a long lock/delay, which would then force the loop to exit without actually checking the register. Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: core: Let node ptr of PHY point to PHY and not of PHY providerKishon Vijay Abraham I16-22/+36
In case of multi-phy PHY providers, each PHY should be modeled as a sub node of the PHY provider. Then each PHY will have a different node pointer (node pointer of sub node) than that of PHY provider. Added this provision in the PHY core. Also fixed all drivers to use the updated API. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-07-22phy: core: Fix of_phy_provider_lookup to return PHY provider for sub nodeKishon Vijay Abraham I1-0/+5
Fixed of_phy_provider_lookup to return 'phy_provider' if _of_phy_get passes the node pointer of the sub-node of phy provider node. This is needed when phy provider implements multiple PHYs and each PHY is modelled as the sub-node of PHY provider device node. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-07-22phy: add a driver for the Berlin SATA PHYAntoine Ténart3-0/+292
The Berlin SoC has a two SATA ports. Add a PHY driver to handle them. The mode selection can let us think this PHY can be configured to fit other purposes. But there are reasons to think the SATA mode will be the only one usable: the PHY registers are only accessible indirectly through two registers in the SATA range, the PHY seems to be integrated and no information tells us the contrary. For these reasons, make the driver a SATA PHY driver. Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: Remove ARCH_KIRKWOOD dependencyAndrew Lunn1-1/+1
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. Depend on MACH_KIRKWOOD, which will be set when these SoCs are built as part of mach-mvebv. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: qcom: Add driver for QCOM APQ8064 SATA PHYSrinivas Kandagatla3-0/+296
Add a PHY driver for uses with AHCI based SATA controller driver on the APQ8064 family of SoCs. This patch is a forward port from Qualcomm's v3.4 andriod kernel. Tested on IFC6410 board. CC: Sujit Reddy Thumma <sthumma@codeaurora.org> Tested-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: Kconfig: Update config for Exynos USB DRDSachin Kamat1-0/+2
USB DWC3 driver on Exynos platform does not work without its corresponding phy driver. Hence make the PHY driver depend on Exynos DWC3 driver and default it to yes to make things easier for the end user. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: Kconfig: Re-organize Exynos USB 2.0 PHY configsSachin Kamat1-24/+11
Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and USB gadget controller supported by the DWC2 gadget driver, make it depend on them and default to ARCH_EXYNOS as they are meant for Exynos platforms. Also, make the sub-drivers silent options enabling them based on the SoC platforms that they are meant to work with. This will make life easier for end users who do not have any way knowing the dependencies. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: core: Support regulator supply for PHY powerRoger Quadros1-0/+26
Some PHYs can be powered by an external power regulator. e.g. USB_HS PHY on DRA7 SoC. Make the PHY core support a power regulator. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22drivers: phy: exynos-usb2: add support for Exynos 3250Marek Szyprowski4-8/+29
This patch adds support for Exynos3250 SoC to Exynos2USB PHY driver. Although Exynos3250 has only one device phy interface, the register layout and all operations that are required to get it enabled are almost same as on Exynos4x12. The only different is one more register (REFCLKSEL) which need to be set and lack of MODE SWITCH register. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: add hix5hd2-sata-phy driverJiancheng Xue3-0/+201
Add hix5hd2-sata-phy driver on Hisilicon hix5hd2 soc. Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: pipe3: insert delay to enumerate in GEN2 modeKishon Vijay Abraham I2-2/+54
8-bit delay value (0xF1) is required for GEN2 devices to be enumerated consistently. Added an API to be called from PHY drivers to set this delay value and called it from PIPE3 driver to set the delay value. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2014-07-22phy: phy-omap-pipe3: Add support for PCIe PHYKishon Vijay Abraham I1-21/+82
PCIe PHY uses an external pll instead of the internal pll used by SATA and USB3. So added support in pipe3 PHY to use external pll. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2014-07-22phy: phy-samsung-usb2: Change phy power on/power off sequenceKamil Debski3-40/+77
The Exynos4412 USB 2.0 PHY hardware differs from the description provided in the documentation. Some register bits have different function. This patch fixes the defines of register bits and changes the way how phys are powered on and off. Signed-off-by: Kamil Debski <k.debski@samsung.com> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: exynos5-usbdrd: Make local functions staticJingoo Han1-3/+3
Make local functions static, because these are used only in this file. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: sun4i-usb: Use PTR_ERR_OR_ZEROSachin Kamat1-3/+2
PTR_ERR_OR_ZERO simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: exynos-mipi-video: Use PTR_ERR_OR_ZEROSachin Kamat1-3/+2
PTR_ERR_OR_ZERO simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: exynos-dp-video: Use PTR_ERR_OR_ZEROSachin Kamat1-3/+2
PTR_ERR_OR_ZERO simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jingoo Han <jg1.han@samsung.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-19phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driverMateusz Krawczuk5-0/+205
Add support for the Samsung's S5PV210 SoC to the Exynos USB 2.0 PHY driver. Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> [k.debski@samsung.com: cleanup and commit description] [k.debski@samsung.com: make changes accordingly to the mailing list comments] Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-14phy: Add drivers for PCIe and SATA phy on SPEAr13xxPratyush Anand4-0/+595
ARM based ST Microelectronics's SPEAr1310/40 platforms uses ST's phy (known as 'miphy') for PCIe and SATA. This patch adds drivers for these miphys. This also adds proper bindings for miphys. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Tested-by: Mohit Kumar <mohit.kumar@st.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> [viresh: fixed logs/cclist/checkpatch warnings, broken into smaller patches] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-07-12Merge tag 'usb-3.16-rc5' of ↵Linus Torvalds4-7/+13
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes, PHY driver fixes (they ended up in this tree for lack of somewhere else to put them), and some new USB device ids" * tag 'usb-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove phy: core: Fix error path in phy_create() drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE phy: omap-usb2: fix devm_ioremap_resource error detection code phy: sun4i: depend on RESET_CONTROLLER USB: serial: ftdi_sio: Add Infineon Triboard USB: ftdi_sio: Add extra PID. usb: option: Add ID for Telewell TW-LTE 4G v2 USB: cp210x: add support for Corsair usb dongle
2014-07-11phy: omap-usb2: Balance pm_runtime_enable() on probe failure and removeRoger Quadros1-2/+5
If probe fails then we need to call pm_runtime_disable() to balance out the previous pm_runtime_enable() call. Else it will cause unbalanced pm_runtime_enable() call in the succeding probe call. This anomaly was observed when the call to devm_phy_create() failed with -EPROBE_DEFER. Balance out the pm_runtime_enable() call in .remove() as well. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11phy: core: Fix error path in phy_create()Roger Quadros1-3/+4
Prevent resources from being freed twice in case device_add() call fails within phy_create(). Also use ida_simple_remove() instead of ida_remove() as we had used ida_simple_get() to allocate the ida. Cc: 3.13+ <stable@vger.kernel.org> # 3.13+ Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLESjoerd Simons1-0/+1
Allow phy-exynos-usb2 to be autoloaded based on devicetree information. Tested on Odroid X2 with its USB subsystem build as modules. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11phy: omap-usb2: fix devm_ioremap_resource error detection codeHimangi Saraogi1-2/+2
devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // <smpl> @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11phy: sun4i: depend on RESET_CONTROLLERMaxime Ripard1-0/+1
The driver depend on the reset framework in a mandatory way. Make sure reset_control_get is defined by adding this dependency in Kconfig Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-11HID: sensor-hub: introduce Kconfig dependency on IOMEMChen Gang1-0/+1
When NO_IOMEM is enabled (e.g. score architecture), some drivers which need HAS_IOMEM need notice about it, or it will report related warning: warning: (GPIO_SCH && GPIO_ICH && GPIO_VX855 && GPIO_RDC321X && IE6XX_WDT && RADIO_WL1273 && HID_SENSOR_HUB && MFD_NVEC) selects MFD_CORE which has unmet direct dependencies (HAS_IOMEM) Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-14phy: usb: sunxi: Introduce Allwinner A31 USB PHY supportMaxime Ripard1-11/+22
The USB phy controller in the A31 differs mostly from the older controllers because it has a clock dedicated for each phy, while the older ones were having a single clock for all the phys. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-14phy: sunxi: Rework phy initializationMaxime Ripard1-24/+18
Move the phy initialization and variables declaration to the loop itself, since it is where it really belongs. Also remove all the temporary variables, we can use the structure members directly. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-13phy: exynos5-usbdrd: Add facility for VBUS supplyVivek Gautam1-0/+32
Adding support to enable/disable VBUS controlled by a regulator, to enable vbus supply on the port. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-13phy: Add new Exynos5 USB 3.0 PHY driverVivek Gautam3-0/+656
Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs. The new driver uses the generic PHY framework and will interact with DWC3 controller present on Exynos5 series of SoCs. Also, created a new header file in linux/mfd/syscon/ for Exynos5 SoCs and put the required PMU offset definitions for the basic available PHYs. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-12phy: kona2: use 'select GENERIC_PHY' in KconfigArnd Bergmann1-1/+1
All other phy drivers use 'select', while this one is the only one to use 'depends on'. This is not a bug, just slightly inconsistent, so let's change it to do things the same way as everyone else. We may also want to turn GENERIC_PHY into a silent option that only ever gets turned on if another driver needs it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Matt Porter <mporter@linaro.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-12phy: exynos-mipi-video: fix check on array indexAntoine Ténart1-1/+1
The phys array is of size EXYNOS_MIPI_PHYS_NUM. Trying to access the index EXYNOS_MIPI_PHYS_NUM should return an error. Fixes: 069d2e26e9d6 "phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs" Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-08PHY: Exynos: fix SATA phy license typoArnd Bergmann1-1/+1
If the license string doesn't match exactly, the module refuses to load. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-08phy: omap-usb2: Use generic clock names "wkupclk" and "refclk"Roger Quadros1-7/+23
As clocks might be named differently on multiple platforms, use a generic name in the driver and allow device tree node to specify the platform specific clock name. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-04-24phy: fix kernel oops in phy_lookup()Sergei Shtylyov1-0/+3
The kernel oopses in phy_lookup() due to 'phy->init_data' being NULL if we register PHYs from a device tree probing driver and then call phy_get() on a device that has no representation in the device tree (e.g. a PCI device). Checking the pointer before dereferening it and skipping an interation if it's NULL prevents this kernel oops. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24phy: restore OMAP_CONTROL_PHY dependenciesJean Delvare1-0/+1
When OMAP_CONTROL_USB was renamed to OMAP_CONTROL_PHY (commit 14da699b), its dependencies were lost in the process. Nothing in the commit message indicates that this removal was intentional, so I think it was by accident and the dependencies should be restored. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Roger Quadros <rogerq@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24phy: exynos: fix building as a moduleArnd Bergmann1-4/+5
The top-level phy-samsung-usb2 driver may be configured as a loadable module, which currently causes link errors because of the dependency on the exynos{5250,4x12,4210}_usb2_phy_config symbol. Solving this could be achieved by exporting these symbols, but as the SoC-specific parts of the driver are not currently built as modules, it seems better to just link everything into one module and avoid the need for the export. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-03-17Merge tag 'mvebu-drivers-3.15-2' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann1-1/+1
next/drivers Merge "mvebu drivers for v3.15" from Jason Cooper: pull request #1: - mvebu mbus - use of_find_matching_node_and_match - rtc - use PTR_ERR_OR_ZERO in isl12057 - work around issue in mv where date returned is 2038 - kirkwood -> mach-mvebu - various Kconfig oneliners to allow building kirkwood in -mvebu/ pull request #2: - reset - re-use qnap-poweroff driver for Synology NASs * tag 'mvebu-drivers-3.15-2' of git://git.infradead.org/linux-mvebu: Power: Reset: Generalize qnap-poweroff to work on Synology devices. drivers: Enable building of Kirkwood drivers for mach-mvebu rtc: mv: reset date if after year 2038 rtc: isl12057: use PTR_ERR_OR_ZERO to fix coccinelle warnings bus: mvebu-mbus: make use of of_find_matching_node_and_match Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-09PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driverLoc Ho3-0/+1758
This patch adds support for the APM X-Gene SoC 15Gbps Multi-purpose PHY. This is the physical layer interface for the corresponding host controller. Currently, only external clock and Gen3 SATA mode are supported. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Tuan Phan <tphan@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-09phy: omap: Depend on OMAP_OCP2SCP bus driverRoger Quadros1-0/+2
The OMAP_USB2 and OMAP_PIPE3 PHY devices will not be detected if the OMAP_OCP2SCP bus driver is not present. Make them depend on it. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-09phy: ti-pipe3: Fix suspend/resume and module reloadRoger Quadros1-0/+4
Due to Errata i783, SATA breaks if its DPLL is idled. The recommeded workaround to issue a softreset to the SATA controller doesn't seem to work. Here we just prevent SATA DPLL from Idling and hence avoid the issue altogether. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-09phy: ti-pipe3: streamline PHY operationsRoger Quadros1-51/+63
Limit .power_on() and .power_off() to just control the PHY power and not the DPLL. The DPLL will be enabled in .init() and idled in .exit(). Don't reprogram the DPLL if it has been already locked by the bootloader. This fixes a problem with SATA, where it fails if SATA was used by the bootloader. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-09phy: ti-pipe3: Don't get 'wkupclk' and 'refclk' for SATA PHYRoger Quadros1-9/+15
SATA PHY doesn't need 'wkupclk; and 'refclk' so don't try to get them for SATA PHY. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 06:25:55 +0000