summaryrefslogtreecommitdiffstats
path: root/drivers/phy/allwinner
AgeCommit message (Collapse)AuthorFilesLines
2022-08-30phy: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220818210056.7205-1-wsa+renesas@sang-engineering.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI CSI-2Paul Kocialkowski1-4/+162
The Allwinner A31 D-PHY supports both Rx and Tx modes. While the latter is already supported and used for MIPI DSI this adds support for the former, to be used with MIPI CSI-2. This implementation is inspired by Allwinner's V3s Linux SDK implementation, which was used as a documentation base. It uses the direction dt property to distinguish between tx and rx directions. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://lore.kernel.org/r/20220415152138.635525-3-paul.kocialkowski@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-25phy: sun4i-usb: Add D1 variantSamuel Holland1-0/+10
D1 has a register layout like A100 and H616, with the moved SIDDQ bit. Unlike H616 it does not have any dependencies between PHY instances. Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220203013558.11490-4-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-25phy: sun4i-usb: Rework HCI PHY (aka "pmu_unk1") handlingAndre Przywara1-17/+13
As Icenowy pointed out, newer manuals (starting with H6) actually document the register block at offset 0x800 as "HCI controller and PHY interface", also describe the bits in our "PMU_UNK1" register. Let's put proper names to those "unknown" variables and symbols. While we are at it, generalise the existing code by allowing a bitmap of bits to clear and set, to cover newer SoCs: The A100 and H616 use a different bit for the SIDDQ control. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220203013558.11490-3-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-25phy: sun4i-usb: Remove .disc_thresh where not applicableSamuel Holland1-1/+0
.disc_thresh is not used when .type = sun50i_h6_phy, so providing a value for it is misleading. Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220203013558.11490-2-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-19phy: sun4i-usb: remove enable_pmu_unk1 from sun50i_h6_cfgYangtao Li1-1/+0
For the current code, enable_pmu_unk1 only works in non-a83t and non-h6 types. So let's delete it from the sun50i_h6_cfg. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Link: https://lore.kernel.org/r/dc8cbb7b3cd59902a6719f207d18a232903fac8a.1604988979.git.frank@allwinnertech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16phy: allwinner: convert to devm_platform_ioremap_resource(_byname)Chunfeng Yun4-15/+5
Use devm_platform_ioremap_resource(_byname) to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1604642930-29019-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-17Merge branch 'fixes' into nextVinod Koul1-2/+3
2020-07-17phy: sun4i-usb: explicitly include gpio/consumer.hVinod Koul1-0/+1
Driver uses GPIO functions but doesn't include the header explcitly. Add that to fix build errors when GPIOLIB is disabled. drivers/phy/allwinner/phy-sun4i-usb.c:367:11: error: implicit declaration of function ‘gpiod_get_value_cansleep’; did you mean ‘gpio_get_value_cansleep’? [-Werror=implicit-function-declaration] drivers/phy/allwinner/phy-sun4i-usb.c:707:22: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_clk_get_optional’? [-Werror=implicit-function-declaration] drivers/phy/allwinner/phy-sun4i-usb.c:708:11: error: ‘GPIOD_IN’ undeclared (first use in this function); did you mean ‘GPIOF_IN’? drivers/phy/allwinner/phy-sun4i-usb.c:815:21: error: implicit declaration of function ‘gpiod_to_irq’; did you mean ‘gpio_to_irq’? [-Werror=implicit-function-declaration] Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20200716062427.71763-1-vkoul@kernel.org
2020-07-13phy: allwinner: Make PHY_SUN6I_MIPI_DPHY depend on COMMON_CLKTiezhu Yang1-1/+1
When CONFIG_ARCH_SUNXI is not set but CONFIG_COMPILE_TEST=y, CONFIG_HAVE_CLK=y, CONFIG_HAVE_LEGACY_CLK=y, there exists the following build errors with CONFIG_PHY_SUN6I_MIPI_DPHY=y: drivers/phy/allwinner/phy-sun6i-mipi-dphy.o: In function `sun6i_dphy_init': phy-sun6i-mipi-dphy.c:(.text+0x320): undefined reference to `clk_set_rate_exclusive' drivers/phy/allwinner/phy-sun6i-mipi-dphy.o: In function `sun6i_dphy_exit': phy-sun6i-mipi-dphy.c:(.text+0x2c8): undefined reference to `clk_rate_exclusive_put' clk_set_rate_exclusive() and clk_rate_exclusive_put() are defined in drivers/clk/clk.c, this file is built under CONFIG_COMMON_CLK, so in order to build drivers/phy/allwinner/phy-sun6i-mipi-dphy.c successful used with various configs, CONFIG_PHY_SUN6I_MIPI_DPHY should depend on CONFIG_COMMON_CLK. Fixes: 133552bf03ed ("phy: Remove CONFIG_ARCH_* check for related subdir in Makefile") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/r/1594113746-25393-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-08phy: allwinner: phy-sun6i-mipi-dphy: Constify structsRikard Falkeborn1-2/+2
sun6i_dphy_ops and sun6i_dphy_regmap_config are not modified so make them const structs to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 4407 1944 64 6415 190f drivers/phy/allwinner/phy-sun6i-mipi-dphy.o After: text data bss dec hex filename 4835 1496 64 6395 18fb drivers/phy/allwinner/phy-sun6i-mipi-dphy.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200629195727.9717-1-rikard.falkeborn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-25phy: sun4i-usb: fix dereference of pointer phy0 before it is null checkedColin Ian King1-2/+3
Currently pointer phy0 is being dereferenced via the assignment of phy on the call to phy_get_drvdata before phy0 is null checked, this can lead to a null pointer dereference. Fix this by performing the null check on phy0 before the call to phy_get_drvdata. Also replace the phy0 == NULL check with the more usual !phy0 idiom. Addresses-Coverity: ("Dereference before null check") Fixes: e6f32efb1b12 ("phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200625124428.83564-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24phy: exynos: Rename Exynos to lowercaseKrzysztof Kozlowski1-1/+1
Fix up inconsistent usage of upper and lowercase letters in "Exynos" name. "EXYNOS" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200617152803.17941-1-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-04phy: allwinner: Fix GENMASK misuseRikard Falkeborn1-1/+1
Arguments are supposed to be ordered high then low. Fixes: a228890f9458 ("phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC") Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191110124355.1569-1-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-06phy: Enable compile testing for some of driversKrzysztof Kozlowski1-1/+2
Some of the phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200103164710.4829-2-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-31phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoCIcenowy Zheng3-0/+202
Allwinner H6 SoC contains a USB3 PHY (with USB2 DP/DM lines also controlled). Add a driver for it. The register operations in this driver is mainly extracted from the BSP USB3 driver. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner2-20/+2
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25Merge tag 'phy-for-5.1-rc-v2' of ↵Greg Kroah-Hartman2-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into char-misc-next Kishon writes: phy: for 5.1-rc *) Fix sun4i-usb PHY driver to get USB gadget working on H3/R40/V3/V3s *) Fix cable state handling in phy-twl4030-usb driver to get rid of regulator_put() warning *) Fix linker errors and compilation warnings got with randconfig *) Fix sparse warnings and .cocci warnings Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.1-rc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode phy: fix platform_no_drv_owner.cocci warnings phy: mapphone-mdm6600: add gpiolib dependency phy: ti: usb2: fix OMAP_CONTROL_PHY dependency phy: allwinner: allow compile testing phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static phy: phy-twl4030-usb: Fix cable state handling
2019-04-17phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral modePaul Kocialkowski1-0/+4
On platforms where the MUSB and HCI controllers share PHY0, PHY passby is required when using the HCI controller with the PHY, but it must be disabled when the MUSB controller is used instead. Without this, PHY0 passby is always enabled, which results in broken peripheral mode on such platforms (e.g. H3/H5). Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17phy: allwinner: allow compile testingArnd Bergmann1-3/+6
Some allwinner specific drivers can be built for testing purposes on non-sunxi configurations, which then results in a harmless warning: WARNING: unmet direct dependencies detected for PHY_SUN6I_MIPI_DPHY Depends on [n]: ARCH_SUNXI [=n] && HAS_IOMEM [=y] && OF [=y] && RESET_CONTROLLER [=y] Selected by [y]: - DRM_SUN6I_DSI [=y] && HAS_IOMEM [=y] && DRM_SUN4I [=y] Allow compile-test here as well to avoid the warning, and improve overall build coverage. Fixes: 5d134abf9530 ("phy: Move Allwinner A31 D-PHY driver to drivers/phy/") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-03-26phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYsChen-Yu Tsai1-1/+4
While only the first PHY supports mode switching, the remaining PHYs work in USB host mode. They should support set_mode with mode=USB_HOST instead of failing. This is especially needed now that the USB core does set_mode for all USB ports, which was added in commit b97a31348379 ("usb: core: comply to PHY framework"). Make set_mode with mode=USB_HOST a no-op instead of failing for the non-OTG USB PHYs. Fixes: 6ba43c291961 ("phy-sun4i-usb: Add support for phy_set_mode") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07phy: Move Allwinner A31 D-PHY driver to drivers/phy/Maxime Ripard3-0/+331
Now that our MIPI D-PHY driver has been converted to the phy framework, let's move it into the drivers/phy directory. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/2447609da5b80f148c79b2b2a263a0e779f3e82f.1548085432.git-series.maxime.ripard@bootlin.com
2018-12-12phy: core: rework phy_set_mode to accept phy mode and submodeGrygorii Strashko1-1/+2
Currently the attempt to add support for Ethernet interface mode PHY (MII/GMII/RGMII) will lead to the necessity of extending enum phy_mode and duplicate there values from phy_interface_t enum (or introduce more PHY callbacks) [1]. Both approaches are ineffective and would lead to fast bloating of enum phy_mode or struct phy_ops in the process of adding more PHYs for different subsystems which will make them unmaintainable. As discussed in [1] the solution could be to introduce dual level PHYs mode configuration - PHY mode and PHY submode. The PHY mode will define generic PHY type (subsystem - PCIE/ETHERNET/USB_) while the PHY submode - subsystem specific interface mode. The last is usually already defined in corresponding subsystem headers (phy_interface_t for Ethernet, enum usb_device_speed for USB). This patch is cumulative change which refactors PHY framework code to support dual level PHYs mode configuration - PHY mode and PHY submode. It extends .set_mode() callback to support additional parameter "int submode" and converts all corresponding PHY drivers to support new .set_mode() callback declaration. The new extended PHY API int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) is introduced to support dual level PHYs mode configuration and existing phy_set_mode() API is converted to macros, so PHY framework consumers do not need to be changed (~21 matches). [1] http://lkml.kernel.org/r/d63588f6-9ab0-848a-5ad4-8073143bd95d@ti.com Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: sun4i-usb: add support for H6 USB2 PHYIcenowy Zheng1-2/+17
The USB 2.0 PHY on Allwinner H6 SoC is similar to older Allwinner SoCs, with some USB0 quirk like A83T and PHY index 1/2 missing. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: sun4i-usb: add support for missing USB PHY indexIcenowy Zheng1-0/+7
The new Allwinner H6 SoC's USB2 PHY has two holes -- USB1 (which is a 3.0 port with dedicated PHY) and USB2 (which doesn't exist at all). Add support for this kind of missing USB PHY index. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-12phy: allwinner: sun4i-usb: poll vbus changes on A23/A33 when driving VBUSChen-Yu Tsai1-4/+6
The AXP223 PMIC, like the AXP221, does not generate VBUS change interrupts when N_VBUSEN is used to drive VBUS for the OTG port on the board. This was not noticed until recently, as most A23/A33 boards use a GPIO pin that does not support interrupts for OTG ID detection. This forces the driver to use polling. However the A33-OlinuXino uses a pin that does support interrupts, so the driver uses them. However the VBUS interrupt never fires, and the driver never gets to update the VBUS status. This results in musb timing out waiting for VBUS to rise. This was worked around for the AXP221 by resorting to polling changes in commit 91d96f06a760 ("phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31"). This patch adds the A23 and A33 to the list of SoCs that need the workaround. Fixes: fc1f45ed3043 ("phy-sun4i-usb: Add support for the usb-phys on the sun8i-a33 SoC") Fixes: 123dfdbcfaf5 ("phy-sun4i-usb: Add support for the usb-phys on the sun8i-a23 SoC") Cc: <stable@vger.kernel.org> # 4.3.x: 68dbc2ce77bb phy-sun4i-usb: Use of_match_node to get model specific config data Cc: <stable@vger.kernel.org> # 4.3.x: 5cf700ac9d50 phy: phy-sun4i-usb: Fix optional gpios failing probe Cc: <stable@vger.kernel.org> # 4.3.x: 04e59a0211ff phy-sun4i-usb: Fix irq free conditions to match request conditions Cc: <stable@vger.kernel.org> # 4.3.x: 91d96f06a760 phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31 Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-02-21phy: sun4i-usb: add support for R40 USB PHYIcenowy Zheng1-0/+12
Allwinner R40 features a USB PHY like the one in A64, but with 3 PHYs. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-27Merge tag 'extcon-next-for-4.15' of ↵Greg Kroah-Hartman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into usb-next Chanwoo writes: Update extcon for 4.15 Detailed description for this pull request: 1. Split out extcon header file for consumer and provider device : The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device. - include/linux/extcon-provider.h includes API for the provider device driver. - include/linux/extcon.h includes the API for the consumer device driver. 2. Support the SmartDock accessory on extcon-max77843.c device driver - Support the SmartDock accessory which detects following connectors at the same time. : USB host throught USB hub for mouse, keyboard and so on. : MHL connector for video output. : Charger connector for battery charging. - It tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. 3. Fix the minor issue of extcon driver - Delete the unneeded initialization in extcon-max14577. - Make extcon_info static const in order to fix the warning.
2017-10-23phy: sun4i-usb: enable PHY0 dual route for V3s SoCIcenowy Zheng1-0/+1
Allwinner V3s SoC also features the dual route of the first USB PHY. Enable it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23extcon: Split out extcon header file for consumer and provider deviceChanwoo Choi1-1/+1
The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-22phy: sun4i-usb: Support A83T USB PHYsChen-Yu Tsai1-12/+54
The A83T has 3 USB PHYs, 1 for OTG, 1 for standard USB, 1 for USB HSIC. The phy initialization procedure is very different from other SoCs, but the PMU bits are the same, with additional bits for HSIC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-22phy: sun4i-usb: Support secondary clock for HSIC PHYChen-Yu Tsai1-0/+21
On the Allwinner A83T SoC, the last USB PHY is an HSIC PHY. It requires two clocks instead of one. On all Allwinner SoCs that share the common USB PHY design supported by the phy-sun4i-usb driver, the first PHY is always tied to OTG, and there is at most one HSIC PHY, typically the last. In this patch we take advantage of these known constraints and store an index in the compatible-string-related config structure describing which PHY is HSIC, needing the extra hsic_12M clock. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-07-21phy: allwinner: phy-sun4i-usb: Add log when probingQuentin Schulz1-5/+20
When phy-sun4i-usb's probing fails, it does not print the reason in kernel log, forcing the developer to edit this driver to add info logs. This commit makes the kernel print the reason of phy-sun4i-usb's probing failure or a success message. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Tested-by: Mylène Josserand <mylene.josserand@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01phy: Group vendor specific phy driversVivek Gautam4-0/+1126
Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 00:43:09 +0000