summaryrefslogtreecommitdiffstats
path: root/drivers/pcmcia
AgeCommit message (Collapse)AuthorFilesLines
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-09Merge branch 'for-linus-sa1100' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds9-466/+108
Pull ARM SA1100 updates from Russell King: "We have support for arbitary MMIO registers providing platform GPIOs, which allows us to abstract some of the SA11x0 CF support. This set of updates makes that change" * 'for-linus-sa1100' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: sa1100/simpad: switch simpad CF to use gpiod APIs ARM: sa1100/shannon: convert to generic CF sockets ARM: sa1100/nanoengine: convert to generic CF sockets ARM: sa1100/h3xxx: switch h3xxx PCMCIA to use gpiod APIs ARM: sa1100/cerf: convert to generic CF sockets ARM: sa1100/assabet: convert to generic CF sockets ARM: sa1100: provide infrastructure to support generic CF sockets pcmcia: sa1100: provide generic CF support
2018-04-06ARM: sa1100/simpad: switch simpad CF to use gpiod APIsRussell King1-9/+3
Switch simpad's CF implementation to use the gpiod APIs. The inverted detection is handled using gpiolib's native inversion abilities. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-04-06ARM: sa1100/shannon: convert to generic CF socketsRussell King4-109/+0
Convert shannon to use the generic CF socket support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-04-06ARM: sa1100/nanoengine: convert to generic CF socketsRussell King4-138/+0
Convert nanoengine to use the generic CF socket support. Makefile fix from Arnd Bergmann <arnd@arndb.de>. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-04-03Merge tag 'pm-4.17-rc1' of ↵Linus Torvalds2-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update the cpuidle poll state definition to reduce excessive energy usage related to it, add new CPU ID to the RAPL power capping driver, update the ACPI system suspend code to handle some special cases better, extend the PM core's device links code slightly, add new sysfs attribute for better suspend-to-idle diagnostics and easier hibernation handling, update power management tools and clean up cpufreq quite a bit. Specifics: - Modify the cpuidle poll state implementation to prevent CPUs from staying in the loop in there for excessive times (Rafael Wysocki). - Add Intel Cannon Lake chips support to the RAPL power capping driver (Joe Konno). - Add reference counting to the device links handling code in the PM core (Lukas Wunner). - Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system suspend code (Rafael Wysocki). - Allow devices to be put into deeper low-power states via ACPI if both _SxD and _SxW are missing (Daniel Drake). - Reorganize the core ACPI suspend-to-idle wakeup code to avoid a keyboard wakeup issue on Asus UX331UA (Chris Chiu). - Prevent the PCMCIA library code from aborting suspend-to-idle due to noirq suspend failures resulting from incorrect assumptions (Rafael Wysocki). - Add coupled cpuidle supprt to the Exynos3250 platform (Marek Szyprowski). - Add new sysfs file to make it easier to specify the image storage location during hibernation (Mario Limonciello). - Add sysfs files for collecting suspend-to-idle usage and time statistics for CPU idle states (Rafael Wysocki). - Update the pm-graph utilities (Todd Brandt). - Reduce the kernel log noise related to reporting Low-power Idle constraings by the ACPI system suspend code (Rafael Wysocki). - Make it easier to distinguish dedicated wakeup IRQs in the /proc/interrupts output (Tony Lindgren). - Add the frequency table validation in cpufreq to the core and drop it from a number of cpufreq drivers (Viresh Kumar). - Drop "cooling-{min|max}-level" for CPU nodes from a couple of DT bindings (Viresh Kumar). - Clean up the CPU online error code path in the cpufreq core (Viresh Kumar). - Fix assorted issues in the SCPI, CPPC, mediatek and tegra186 cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian, Viresh Kumar). - Drop memory allocation error messages from a few places in cpufreq and cpuildle drivers (Markus Elfring)" * tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits) ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA cpufreq: CPPC: Use transition_delay_us depending transition_latency PM / hibernate: Change message when writing to /sys/power/resume PM / hibernate: Make passing hibernate offsets more friendly cpuidle: poll_state: Avoid invoking local_clock() too often PM: cpuidle/suspend: Add s2idle usage and time state attributes cpuidle: Enable coupled cpuidle support on Exynos3250 platform cpuidle: poll_state: Add time limit to poll_idle() cpufreq: tegra186: Don't validate the frequency table twice cpufreq: speedstep: Don't validate the frequency table twice cpufreq: sparc: Don't validate the frequency table twice cpufreq: sh: Don't validate the frequency table twice cpufreq: sfi: Don't validate the frequency table twice cpufreq: scpi: Don't validate the frequency table twice cpufreq: sc520: Don't validate the frequency table twice cpufreq: s3c24xx: Don't validate the frequency table twice cpufreq: qoirq: Don't validate the frequency table twice cpufreq: pxa: Don't validate the frequency table twice cpufreq: ppc_cbe: Don't validate the frequency table twice cpufreq: powernow: Don't validate the frequency table twice ...
2018-03-26pcmcia: remove blackfin driverArnd Bergmann3-324/+0
The blackfin architecture is getting removed, so this one is no longer needed either. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26pcmcia: remove m32r driversArnd Bergmann6-1724/+0
The m32r architecture is getting removed, so these drivers are no longer needed. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-24ARM: sa1100/h3xxx: switch h3xxx PCMCIA to use gpiod APIsRussell King1-9/+7
Switch h3xxx's PCMCIA implementation to use the gpiod APIs where possible. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24ARM: sa1100/cerf: convert to generic CF socketsRussell King4-91/+0
Convert Cerf to use the generic CF socket support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24ARM: sa1100/assabet: convert to generic CF socketsRussell King4-105/+0
Convert Assabet to use the generic CF socket support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24pcmcia: sa1100: provide generic CF supportRussell King1-5/+98
Provide generic non-voltage sensing socket support for StrongARM platforms using the gpiolib and regulator subsystems to obtain the resources to control the socket. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (for drivers/pcmcia) Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-02-22PCMCIA / PM: Avoid noirq suspend aborts during suspend-to-idleRafael J. Wysocki2-3/+8
There is a problem with PCMCIA system resume callbacks with respect to suspend-to-idle in which the ->suspend_noirq() callback may be invoked after the ->resume_noirq() one without resuming the system entirely in some cases. This doesn't work for PCMCIA because of the lack of symmetry between its system suspend and system resume "noirq" callbacks. The system resume handling in PCMCIA is split between socket_early_resume() and socket_late_resume() which are called in different phases of system resume and both need to run for socket_suspend() (invoked by the system suspend "noirq" callback) to work. Specifically, socket_suspend() returns an error when called after socket_early_resume() without socket_late_resume(), so if the suspend-to-idle core detects a spurious wakeup event and attempts to put the system back to sleep, that is aborted by the error coming from socket_suspend(). Avoid that by using a new socket state flag, SOCKET_IN_RESUME, to indicate that socket_early_resume() has already run for the socket in which case socket_suspend() will do minimum handling and return 0. This change has been tested on my venerable Toshiba Portege R500 (which is where the problem has been discovered in the first place), but admittedly I have no PCMCIA cards to test along with the socket itself. Fixes: 33e4f80ee69b (ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [linux@dominikbrodowski.net: follow same codepaths for both suspend variants; call ->suspend()] Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-02-08Merge branch 'pcmcia' of ↵Linus Torvalds2-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia Pull pcmcia updates from Dominik Brodowski: "The linux-pcmcia mailing list was shut down, so offer an alternative path for patches in MAINTAINERS. Also, throw in two odd fixes for the pcmcia subsystem" * 'pcmcia' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia: pcmcia: soc_common: Handle return value of clk_prepare_enable pcmcia: use proper printk format for resource pcmcia: remove mailing list, update MAINTAINERS
2018-01-24pcmcia: soc_common: Handle return value of clk_prepare_enableArvind Yadav1-2/+6
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> CC: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-01-24pcmcia: use proper printk format for resourceDominik Brodowski1-1/+1
Even though it is just in a dev_dbg statement, improve the printk format to use %pr instead of plain %p. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2017-11-29pcmcia: at91_cf: Use PTR_ERR_OR_ZERO()Vasyl Gomonovych1-3/+1
Fix ptr_ret.cocci warnings: drivers/pcmcia/at91_cf.c:239:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-17drivers/pcmcia/sa1111_badge4.c: avoid unused function warningArnd Bergmann1-0/+2
pcmv_setup() is only used when the badge4 driver is built-in, but not when it is a loadable module: drivers/pcmcia/sa1111_badge4.c:153:122: error: 'pcmv_setup' defined but not used [-Werror=unused-function] This adds an #ifdef to avoid the definition of the unused function in the modular case. Link: http://lkml.kernel.org/r/20170911201133.3421636-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk@armlinux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-13/+20
Pull ARM updates from Russell King: - add support for ELF fdpic binaries on both MMU and noMMU platforms - linker script cleanups - support for compressed .data section for XIP images - discard memblock arrays when possible - various cleanups - atomic DMA pool updates - better diagnostics of missing/corrupt device tree - export information to allow userspace kexec tool to place images more inteligently, so that the device tree isn't overwritten by the booting kernel - make early_printk more efficient on semihosted systems - noMMU cleanups - SA1111 PCMCIA update in preparation for further cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (38 commits) ARM: 8719/1: NOMMU: work around maybe-uninitialized warning ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r" ARM: 8713/1: NOMMU: Support MPU in XIP configuration ARM: 8712/1: NOMMU: Use more MPU regions to cover memory ARM: 8711/1: V7M: Add support for MPU to M-class ARM: 8710/1: Kconfig: Kill CONFIG_VECTORS_BASE ARM: 8709/1: NOMMU: Disallow MPU for XIP ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C ARM: 8707/1: NOMMU: Update MPU accessors to use cp15 helpers ARM: 8706/1: NOMMU: Move out MPU setup in separate module ARM: 8702/1: head-common.S: Clear lr before jumping to start_kernel() ARM: 8705/1: early_printk: use printascii() rather than printch() ARM: 8703/1: debug.S: move hexbuf to a writable section ARM: add additional table to compressed kernel ARM: decompressor: fix BSS size calculation pcmcia: sa1111: remove special sa1111 mmio accessors pcmcia: sa1111: use sa1111_get_irq() to obtain IRQ resources ARM: better diagnostics with missing/corrupt dtb ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size() ARM: 8698/1: dma-mapping: Mark atomic_pool as __ro_after_init ..
2017-11-16Merge tag 'char-misc-4.15-rc1' of ↵Linus Torvalds4-12/+6
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ...
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-5/+7
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds8-31/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-06PCI: Add for_each_pci_bridge() helperAndy Shevchenko1-3/+2
The following pattern is often used: list_for_each_entry(dev, &bus->devices, bus_list) { if (pci_is_bridge(dev)) { ... } } Add a for_each_pci_bridge() helper to make that code easier to write and read by reducing indentation level. It also saves one or few lines of code in each occurrence. Convert PCI core parts here at the same time. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [bhelgaas: fold in http://lkml.kernel.org/r/20171013165352.25550-1-andriy.shevchenko@linux.intel.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-06drivers/pcmcia: omap1: Fix error in automated timer conversionKees Cook1-1/+3
One part of automated timer conversion tools did not take into account void * variables when searching out prior direct timer callback usage, which resulted in an attempt to dereference the timer field without a proper type. Reported-by: kbuild test robot Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-05drivers/pcmcia: omap1: Fix error in automated timer conversionKees Cook1-1/+3
One part of automated timer conversion tools did not take into account void * variables when searching out prior direct timer callback usage, which resulted in an attempt to dereference the timer field without a proper type. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04drivers/pcmcia: Convert timers to use timer_setup()Kees Cook8-31/+24
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: David Howells <dhowells@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pcmcia@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller17-0/+17
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02drivers/pcmcia: Convert timers to use timer_setup()Kees Cook8-31/+24
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: David Howells <dhowells@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pcmcia@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> # for soc_common.c
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman17-0/+17
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20pcmcia: m32r: Convert timers to use timer_setup()Kees Cook2-10/+4
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: linux-pcmcia@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18pcmcia/electra_cf: Convert timers to use timer_setup()Kees Cook1-5/+7
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linux-pcmcia@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04pcmcia: make pccard_cis_attr constBhumika Goyal2-2/+2
Make this const as it is only passed to the const arguments of the functions sysfs_remove_bin_file and sysfs_create_bin_file. Make the declaration const too. Structure found using Coccinelle and changes done by hand. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-03pcmcia: sa1111: remove special sa1111 mmio accessorsRussell King1-6/+6
Remove the special SA1111 MMIO accessors from the SA1111 PCMCIA driver as their definition will be removed shortly. The SA1111 accessors are barrierless, so use the _relaxed variants. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-03pcmcia: sa1111: use sa1111_get_irq() to obtain IRQ resourcesRussell King1-7/+14
Use the newly provided sa1111_get_irq() to fetch the IRQ resources for the SA1111 PCMCIA driver. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-08-29MIPS: Alchemy: Threaded carddetect irqs for devboardsManuel Lauss1-14/+19
This introduces threaded carddetect irqs for the db1200/db1300 boards. Main benefit is that the broken insertion/ejection interrupt pairs can now be better supported and debounced in software. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15287/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-12pcmcia: ds: convert to use DRIVER_ATTR_ROGreg Kroah-Hartman1-2/+2
We are trying to get rid of DRIVER_ATTR(), and the pcmcia driver's attribute can be trivially changed to use DRIVER_ATTR_RO(). Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: <linux-pcmcia@lists.infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-10Merge tag 'hwparam-20170420' of ↵Linus Torvalds2-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull hw lockdown support from David Howells: "Annotation of module parameters that configure hardware resources including ioports, iomem addresses, irq lines and dma channels. This allows a future patch to prohibit the use of such module parameters to prevent that hardware from being abused to gain access to the running kernel image as part of locking the kernel down under UEFI secure boot conditions. Annotations are made by changing: module_param(n, t, p) module_param_named(n, v, t, p) module_param_array(n, t, m, p) to: module_param_hw(n, t, hwtype, p) module_param_hw_named(n, v, t, hwtype, p) module_param_hw_array(n, t, hwtype, m, p) where the module parameter refers to a hardware setting hwtype specifies the type of the resource being configured. This can be one of: ioport Module parameter configures an I/O port iomem Module parameter configures an I/O mem address ioport_or_iomem Module parameter could be either (runtime set) irq Module parameter configures an I/O port dma Module parameter configures a DMA channel dma_addr Module parameter configures a DMA buffer address other Module parameter configures some other value Note that the hwtype is compile checked, but not currently stored (the lockdown code probably won't require it). It is, however, there for future use. A bonus is that the hwtype can also be used for grepping. The intention is for the kernel to ignore or reject attempts to set annotated module parameters if lockdown is enabled. This applies to options passed on the boot command line, passed to insmod/modprobe or direct twiddling in /sys/module/ parameter files. The module initialisation then needs to handle the parameter not being set, by (1) giving an error, (2) probing for a value or (3) using a reasonable default. What I can't do is just reject a module out of hand because it may take a hardware setting in the module parameters. Some important modules, some ipmi stuff for instance, both probe for hardware and allow hardware to be manually specified; if the driver is aborts with any error, you don't get any ipmi hardware. Further, trying to do this entirely in the module initialisation code doesn't protect against sysfs twiddling. [!] Note that in and of itself, this series of patches should have no effect on the the size of the kernel or code execution - that is left to a patch in the next series to effect. It does mark annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in an already existing field" * tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits) Annotate hardware config module parameters in sound/pci/ Annotate hardware config module parameters in sound/oss/ Annotate hardware config module parameters in sound/isa/ Annotate hardware config module parameters in sound/drivers/ Annotate hardware config module parameters in fs/pstore/ Annotate hardware config module parameters in drivers/watchdog/ Annotate hardware config module parameters in drivers/video/ Annotate hardware config module parameters in drivers/tty/ Annotate hardware config module parameters in drivers/staging/vme/ Annotate hardware config module parameters in drivers/staging/speakup/ Annotate hardware config module parameters in drivers/staging/media/ Annotate hardware config module parameters in drivers/scsi/ Annotate hardware config module parameters in drivers/pcmcia/ Annotate hardware config module parameters in drivers/pci/hotplug/ Annotate hardware config module parameters in drivers/parport/ Annotate hardware config module parameters in drivers/net/wireless/ Annotate hardware config module parameters in drivers/net/wan/ Annotate hardware config module parameters in drivers/net/irda/ Annotate hardware config module parameters in drivers/net/hamradio/ Annotate hardware config module parameters in drivers/net/ethernet/ ...
2017-04-20Annotate hardware config module parameters in drivers/pcmcia/David Howells2-8/+8
When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in drivers/pcmcia/. Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-pcmcia@lists.infradead.org
2017-03-21drivers/pcmcia: NO_IRQ removal for electra_cf.cMichael Ellerman1-2/+2
We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it from electra_cf.c which is a powerpc-only driver. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-12-12drivers/pcmcia/m32r_pcc.c: check return from add_pcc_socketSudip Mukherjee1-2/+8
If request_irq() fails it passes the error to the caller. The caller now checks it and jumps to the common error path on failure. Link: http://lkml.kernel.org/r/1474237304-897-3-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-12drivers/pcmcia/m32r_pcc.c: use common error pathSudip Mukherjee1-7/+10
Use a common error path for the failure. Link: http://lkml.kernel.org/r/1474237304-897-2-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-12drivers/pcmcia/m32r_pcc.c: check return from request_irqSudip Mukherjee1-4/+10
While building m32r allmodconfig we were getting warning: drivers/pcmcia/m32r_pcc.c:331:2: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result request_irq() can fail and we should always be checking the result from it. Check the result and return it to the caller. Link: http://lkml.kernel.org/r/1474237304-897-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-11pcmcia: fix return value of soc_pcmcia_regulator_setArnd Bergmann1-1/+1
The newly introduced soc_pcmcia_regulator_set() function sometimes returns without setting its return code, as shown by this warning: drivers/pcmcia/soc_common.c: In function 'soc_pcmcia_regulator_set': drivers/pcmcia/soc_common.c:112:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes it to propagate the regulator_disable() result instead. Fixes: ac61b6001a63 ("pcmcia: soc_common: add support for Vcc and Vpp regulators") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-22pcmcia: soc_common: add driver-data pointerRussell King1-0/+1
Add a driver-data pointer so that low level drivers can add additional data to the soc_common pcmcia socket structure. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-22pcmcia: soc_common: add support for voltage sense GPIOsRussell King2-2/+8
Add support for the voltage sense GPIOs which are wired up on some platforms. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-22pcmcia: soc_common: constify pcmcia_low_level ops pointerRussell King2-2/+2
Constify the pcmcia_low_level operation pointer to soc_pcmcia_init_one() which has no need to modify it. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-22pcmcia: soc_common: switch to a per-socket cpufreq notifierRussell King2-54/+26
Switch to a per-socket cpufreq notifier rather than a global notifier. This allows each socket to be self-contained. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-22pcmcia: soc_common: add support for Vcc and Vpp regulatorsRussell King2-1/+47
Add support for handling supply regulators in the soc_common code. This allows us to separate out the board specifics for setting voltages from the PCMCIA code. We detect when setting a voltage fails, and report this fact - some platforms have fixed-voltage supplies (eg, for CF sockets at 3.3V) and we need to ignore attempts to configure for 5V, as per the existing board specific drivers. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>