summaryrefslogtreecommitdiffstats
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2019-10-15PCI: PM: Fix pci_power_up()Rafael J. Wysocki1-13/+11
There is an arbitrary difference between the system resume and runtime resume code paths for PCI devices regarding the delay to apply when switching the devices from D3cold to D0. Namely, pci_restore_standard_config() used in the runtime resume code path calls pci_set_power_state() which in turn invokes __pci_start_power_transition() to power up the device through the platform firmware and that function applies the transition delay (as per PCI Express Base Specification Revision 2.0, Section 6.6.1). However, pci_pm_default_resume_early() used in the system resume code path calls pci_power_up() which doesn't apply the delay at all and that causes issues to occur during resume from suspend-to-idle on some systems where the delay is required. Since there is no reason for that difference to exist, modify pci_power_up() to follow pci_set_power_state() more closely and invoke __pci_start_power_transition() from there to call the platform firmware to power up the device (in case that's necessary). Fixes: db288c9c5f9d ("PCI / PM: restore the original behavior of pci_set_power_state()") Reported-by: Daniel Drake <drake@endlessm.com> Tested-by: Daniel Drake <drake@endlessm.com> Link: https://lore.kernel.org/linux-pm/CAD8Lp44TYxrMgPLkHCqF9hv6smEurMXvmmvmtyFhZ6Q4SE+dig@mail.gmail.com/T/#m21be74af263c6a34f36e0fc5c77c5449d9406925 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
2019-09-28Merge branch 'next-lockdown' of ↵Linus Torvalds3-3/+31
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
2019-09-23Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds52-908/+3645
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-23Merge branch 'pci/trivial'Bjorn Helgaas10-17/+3
- Fix typos and whitespace errors (Bjorn Helgaas, Krzysztof Wilczynski) - Remove unnecessary "return" statements (Krzysztof Wilczynski) - Correct of_irq_parse_pci() function documentation (Lubomir Rintel) * pci/trivial: PCI: Remove unnecessary returns PCI: OF: Correct of_irq_parse_pci() documentation PCI: Fix typos and whitespace errors
2019-09-23Merge branch 'remotes/lorenzo/pci/vmd'Bjorn Helgaas1-10/+15
- Fix VMD config addressing to ignore starting bus offset (Jon Derrick) - Fix VMD shadow offset scratchpad address (Jon Derrick) * remotes/lorenzo/pci/vmd: PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets
2019-09-23Merge branch 'lorenzo/pci/tegra'Bjorn Helgaas9-49/+1922
- Fix Tegra OF node reference leak (Nishka Dasgupta) - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s features (Vidya Sagar) - Disable MSI for Tegra Root Ports since they don't support using MSI for all Root Port events (Vidya Sagar) - Group DesignWare write-protected register writes together (Vidya Sagar) - Move DesignWare capability search interfaces so they can be used by both host and endpoint drivers (Vidya Sagar) - Add DesignWare extended capability search interfaces (Vidya Sagar) - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar) - Add "snps,enable-cdm-check" DT binding for Configuration Dependent Module (CDM) register checking (Vidya Sagar) - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya Sagar) - Add "supports-clkreq" DT binding for host drivers to decide whether to advertise low power features (Vidya Sagar) - Add DT binding for Tegra194 (Vidya Sagar) - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar) - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar) - Add support for Tegra194 host controller (Vidya Sagar) - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar) - Add Tegra support for slot regulators for p2972-0000 platform (Vidya Sagar) * lorenzo/pci/tegra: arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support phy: tegra: Add PCIe PIPE2UPHY support dt-bindings: PHY: P2U: Add Tegra194 P2U block dt-bindings: PCI: tegra: Add device tree support for Tegra194 dt-bindings: Add PCIe supports-clkreq property PCI: dwc: Add support to enable CDM register check dt-bindings: PCI: designware: Add binding for CDM register check PCI: dwc: Export dw_pcie_wait_for_link() API PCI: dwc: Add extended configuration space capability search API PCI: dwc: Move config space capability search API PCI: dwc: Group DBI registers writes requiring unlocking PCI: Disable MSI for Tegra root ports PCI: Add #defines for some of PCIe spec r4.0 features PCI: tegra: Fix OF node reference leak
2019-09-23Merge branch 'remotes/lorenzo/pci/mobiveil'Bjorn Helgaas1-3/+7
- Fix mobiveil inbound window CPU base address setup (Hou Zhiqiang) * remotes/lorenzo/pci/mobiveil: PCI: mobiveil: Fix the CPU base address setup in inbound window
2019-09-23Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas6-23/+19
- Propagate regulator_get_optional() errors so callers can distinguish real errors from optional regulators that are absent (Thierry Reding) - Propagate devm_of_phy_get() errors so callers can distinguish real errors from optional PHYs that are absent (Thierry Reding) - Add Andrew Murray as PCI native driver reviewer (Lorenzo Pieralisi) * remotes/lorenzo/pci/misc: MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: iproc: Propagate errors for optional PHYs PCI: histb: Propagate errors for optional regulators PCI: armada8x: Propagate errors for optional PHYs PCI: imx6: Propagate errors for optional regulators PCI: exynos: Propagate errors for optional PHYs PCI: rockchip: Propagate errors for optional regulators
2019-09-23Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas1-0/+18
- Add mediatek support for MT7629 (Jianjun Wang) * remotes/lorenzo/pci/mediatek: PCI: mediatek: Add controller support for MT7629 dt-bindings: PCI: Add support for MT7629
2019-09-23Merge branch 'remotes/lorenzo/pci/layerscape'Bjorn Helgaas3-3/+21
- Mark Layerscape endpoint BARs 2 and 4 as 64-bit (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP so EP/RC can be built separately (Xiaowei Bao) * remotes/lorenzo/pci/layerscape: PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driver
2019-09-23Merge branch 'remotes/lorenzo/pci/imx'Bjorn Helgaas1-0/+33
- Reduce i.MX 6Quad DBI register length to avoid aborts from accessing invalid registers (Stefan Agner) * remotes/lorenzo/pci/imx: PCI: imx6: Limit DBI register length
2019-09-23Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas2-15/+81
- Fix Hyper-V use-after-free in pci_dev removal (Dexuan Cui) - Fix Hyper-V build error in non-sysfs config (Randy Dunlap) - Reallocate to avoid Hyper-V domain number collisions (Haiyang Zhang) - Use Hyper-V instance ID bytes 4-5 to reduce domain collisions (Haiyang Zhang) * remotes/lorenzo/pci/hv: PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers PCI: hv: Detect and fix Hyper-V PCI domain number collision PCI: pci-hyperv: Fix build errors on non-SYSFS config PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it
2019-09-23Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas2-3/+5
- Make kirin_dw_pcie_ops constant (Nishka Dasgupta) - Make DesignWare "num-lanes" property optional and remove from relevant DTs (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: arm64: dts: fsl: Remove num-lanes property from PCIe nodes ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes PCI: dwc: Return directly when num-lanes is not found dt-bindings: PCI: designware: Remove the num-lanes from Required properties PCI: kirin: Make structure kirin_dw_pcie_ops constant
2019-09-23Merge branch 'remotes/lorenzo/pci/al'Bjorn Helgaas6-0/+445
- Add driver for Amazon Annapurna Labs PCIe controller (Jonathan Chocron) - Disable MSI-X since Annapurna Labs advertises it, but it's broken (Jonathan Chocron) - Disable VPD since Annapurna Labs advertises it, but it's broken (Jonathan Chocron) - Add ACS quirk since Annapurna Labs doesn't support ACS but does provide some equivalent protections (Ali Saidi) * remotes/lorenzo/pci/al: PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID # Conflicts: # drivers/pci/quirks.c
2019-09-23Merge branch 'pci/resource'Bjorn Helgaas3-5/+17
- Convert pci_resource_to_user() to a weak function to remove HAVE_ARCH_PCI_RESOURCE_TO_USER #defines (Denis Efremov) - Use PCI_SRIOV_NUM_BARS for idiomatic loop structure (Denis Efremov) - Fix Resizable BAR size suspend/restore for 1MB BARs (Sumit Saxena) - Correct "pci=resource_alignment" example in documentation (Alexey Kardashevskiy) * pci/resource: PCI: Correct pci=resource_alignment parameter example PCI: Restore Resizable BAR size bits correctly for 1MB BARs PCI: Use PCI_SRIOV_NUM_BARS in loops instead of PCI_IOV_RESOURCE_END PCI: Convert pci_resource_to_user() to a weak function # Conflicts: # drivers/pci/pci.c
2019-09-23Merge branch 'pci/pciehp'Bjorn Helgaas4-80/+66
- Cleanup pciehp LED/indicator control with a new consolidated pciehp_set_indicators() interface that controls both Attention and Power Indicators (Denis Efremov) * pci/pciehp: PCI: pciehp: Refer to "Indicators" instead of "LEDs" in comments PCI: pciehp: Remove pciehp_green_led_{on,off,blink}() PCI: pciehp: Remove pciehp_set_attention_status() PCI: pciehp: Combine adjacent indicator updates PCI: pciehp: Add pciehp_set_indicators() to set both indicators
2019-09-23Merge branch 'pci/p2pdma'Bjorn Helgaas1-108/+266
- Move P2PCMA PCI bus offset from generic dev_pagemap to pci_p2pdma_pagemap (Logan Gunthorpe) - Add provider's pci_dev to pci_p2pdma_pagemap (Logan Gunthorpe) - Apply host bridge whitelist for ACS (Logan Gunthorpe) - Whitelist some Intel host bridges for P2PDMA (Logan Gunthorpe) - Add attrs to pci_p2pdma_map_sg() to match dma_map_sg() (Logan Gunthorpe) - Add pci_p2pdma_unmap_sg() (Logan Gunthorpe) - Store P2PDMA mapping method in xarray (Logan Gunthorpe) - Map requests that traverse a host bridge (Logan Gunthorpe) - Allow IOMMU for host bridge whitelist (Logan Gunthorpe) * pci/p2pdma: PCI/P2PDMA: Update pci_p2pdma_distance_many() documentation PCI/P2PDMA: Allow IOMMU for host bridge whitelist PCI/P2PDMA: dma_map() requests that traverse the host bridge PCI/P2PDMA: Store mapping method in an xarray PCI/P2PDMA: Factor out __pci_p2pdma_map_sg() PCI/P2PDMA: Introduce pci_p2pdma_unmap_sg() PCI/P2PDMA: Add attrs argument to pci_p2pdma_map_sg() PCI/P2PDMA: Whitelist some Intel host bridges PCI/P2PDMA: Factor out host_bridge_whitelist() PCI/P2PDMA: Apply host bridge whitelist for ACS PCI/P2PDMA: Factor out __upstream_bridge_distance() PCI/P2PDMA: Add constants for map type results to upstream_bridge_distance() PCI/P2PDMA: Add provider's pci_dev to pci_p2pdma_pagemap struct PCI/P2PDMA: Introduce private pagemap structure
2019-09-23Merge branch 'pci/msi'Bjorn Helgaas1-1/+1
- Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) * pci/msi: PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for RISC-V
2019-09-23Merge branch 'pci/misc'Bjorn Helgaas8-238/+247
- Use devm_add_action_or_reset() helper (Fuqian Huang) - Mark expected switch fall-through (Gustavo A. R. Silva) - Convert sysfs device attributes from __ATTR() to DEVICE_ATTR() (Kelsey Skunberg) - Convert sysfs file permissions from S_IRUSR etc to octal (Kelsey Skunberg) - Move SR-IOV sysfs functions to iov.c (Kelsey Skunberg) - Add pci_info_ratelimited() to ratelimit PCI messages separately (Krzysztof Wilczynski) - Fix "'static' not at beginning of declaration" warnings (Krzysztof Wilczynski) - Clean up resource_alignment parameter to not require static buffer (Logan Gunthorpe) - Add ACS quirk for iProc PAXB (Abhinav Ratna) - Add pci_irq_vector() and other stubs for !CONFIG_PCI (Herbert Xu) * pci/misc: PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI PCI: Add ACS quirk for iProc PAXB PCI: Force trailing new line to resource_alignment_param in sysfs PCI: Move pci_[get|set]_resource_alignment_param() into their callers PCI: Clean up resource_alignment parameter to not require static buffer PCI: Use static const struct, not const static struct PCI: Add pci_info_ratelimited() to ratelimit PCI separately PCI/IOV: Remove group write permission from sriov_numvfs, sriov_drivers_autoprobe PCI/IOV: Move sysfs SR-IOV functions to iov.c PCI: sysfs: Change permissions from symbolic to octal PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO() PCI: sysfs: Define device attributes with DEVICE_ATTR*() PCI: Mark expected switch fall-through PCI: Use devm_add_action_or_reset()
2019-09-23Merge branch 'pci/enumeration'Bjorn Helgaas8-344/+434
- Consolidate _HPP & _HPX code in pci-acpi.h and remove unnecessary struct hotplug_program_ops (Krzysztof Wilczynski) - Fixup PCIe device types to remove the need for dev->has_secondary_link (Mika Westerberg) * pci/enumeration: PCI: Get rid of dev->has_secondary_link flag PCI: Make pcie_downstream_port() available outside of access.c PCI/ACPI: Remove unnecessary struct hotplug_program_ops PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*
2019-09-23Merge branch 'pci/encapsulate'Bjorn Helgaas3-6/+45
- Move many symbols from public linux/pci.h to subsystem-private drivers/pci/pci.h (Kelsey Skunberg) - Unexport pci_bus_get() and pci_bus_sem since they're not needed by modules (Kelsey Skunberg) - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) * pci/encapsulate: PCI: Make pci_set_of_node(), etc private PCI: Make pci_enable_ptm() private PCI: Make pcie_set_ecrc_checking(), pcie_ecrc_get_policy() private PCI: Make pci_ats_init() private PCI: Make pcie_update_link_speed() private PCI: Make pci_bus_get(), pci_bus_put() private PCI: Make pci_hotplug_io_size, mem_size, and bus_size private PCI: Make pci_save_vc_state(), pci_restore_vc_state(), etc private PCI: Make pci_get_host_bridge_device(), pci_put_host_bridge_device() private PCI: Make pci_check_pme_status(), pci_pme_wakeup_bus() private PCI: Make PCI_PM_* delay times private PCI: Unexport pci_bus_sem PCI: Unexport pci_bus_get() and pci_bus_put() PCI: Remove pci_block_cfg_access() et al (unused)
2019-09-20PCI: tegra: Add support to enable slot regulatorsVidya Sagar1-0/+83
Add support to get regulator information of 3.3V and 12V supplies of a PCIe slot from the respective controller's device-tree node and enable those supplies. This is required in platforms like p2972-0000 where the supplies to x16 slot owned by C5 controller need to be enabled before attempting to enumerate the devices. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-20PCI: tegra: Add support to configure sideband pinsVidya Sagar1-2/+10
Add support to configure sideband signal pins when the information is present in the respective controller device-tree node. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: fold in YueHaibing's fix for build error without CONFIG_PINCTRL; https://lore.kernel.org/r/20190920014807.38288-1-yuehaibing@huawei.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-20Merge tag 'powerpc-5.4-1' of ↵Linus Torvalds2-12/+65
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This is a bit late, partly due to me travelling, and partly due to a power outage knocking out some of my test systems *while* I was travelling. - Initial support for running on a system with an Ultravisor, which is software that runs below the hypervisor and protects guests against some attacks by the hypervisor. - Support for building the kernel to run as a "Secure Virtual Machine", ie. as a guest capable of running on a system with an Ultravisor. - Some changes to our DMA code on bare metal, to allow devices with medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space. - Support for firmware assisted crash dumps on bare metal (powernv). - Two series fixing bugs in and refactoring our PCI EEH code. - A large series refactoring our exception entry code to use gas macros, both to make it more readable and also enable some future optimisations. As well as many cleanups and other minor features & fixups. Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar, Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde" * tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits) powerpc/mm/mce: Keep irqs disabled during lockless page table walk powerpc: Use ftrace_graph_ret_addr() when unwinding powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR ftrace: Look up the address of return_to_handler() using helpers powerpc: dump kernel log before carrying out fadump or kdump docs: powerpc: Add missing documentation reference powerpc/xmon: Fix output of XIVE IPI powerpc/xmon: Improve output of XIVE interrupts powerpc/mm/radix: remove useless kernel messages powerpc/fadump: support holes in kernel boot memory area powerpc/fadump: remove RMA_START and RMA_END macros powerpc/fadump: update documentation about option to release opalcore powerpc/fadump: consider f/w load area powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel powerpc/fadump: improve how crashed kernel's memory is reserved powerpc/fadump: consider reserved ranges while releasing memory powerpc/fadump: make crash memory ranges array allocation generic ...
2019-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds5-0/+384
Pull networking updates from David Miller: 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski. 2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox. 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit. 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen. 5) Support all variants of 5750X bnxt_en chips, from Michael Chan. 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov. 7) Add TCP syn cookies bpf helper, from Petar Penkov. 8) Add 'nettest' to selftests and use it, from David Ahern. 9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel. 10) Add VLAN offload to stmmac, from Jose Abreu. 11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing. 12) Add IONIC driver, from Shannon Nelson. 13) Several kTLS cleanups, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
2019-09-17Merge tag 'leds-for-5.4-rc1' of ↵Linus Torvalds1-6/+1
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-09-17Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core irq updates from Thomas Gleixner: "Updates from the irq departement: - Update the interrupt spreading code so it handles numa node with different CPU counts properly. - A large overhaul of the ARM GiCv3 driver to support new PPI and SPI ranges. - Conversion of all alloc_fwnode() users to use physical addresses instead of virtual addresses so the virtual addresses are not leaked. The physical address is sufficient to identify the associated interrupt chip. - Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips. - Enforce interrupt threading at compile time if RT is enabled. - Small updates and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices irqchip/uniphier-aidet: Use devm_platform_ioremap_resource() irqdomain: Add the missing assignment of domain->fwnode for named fwnode irqchip/mmp: Coexist with GIC root IRQ controller irqchip/mmp: Mask off interrupts from other cores irqchip/mmp: Add missing chained_irq_{enter,exit}() irqchip/mmp: Do not use of_address_to_resource() to get mux regs irqchip/meson-gpio: Add support for meson sm1 SoCs dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs genirq/affinity: Remove const qualifier from node_to_cpumask argument genirq/affinity: Spread vectors on node according to nr_cpu ratio genirq/affinity: Improve __irq_build_affinity_masks() irqchip: Remove dev_err() usage after platform_get_irq() irqchip: Add include guard to irq-partition-percpu.h irqchip/mmp: Do not call irq_set_default_host() on DT platforms irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803 irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks irqchip/gic-v3: Warn about inconsistent implementations of extended ranges irqchip/gic-v3: Add EPPI range support ...
2019-09-17PCI: vmd: Fix shadow offsets to reflect spec changesJon Derrick1-3/+6
The shadow offset scratchpad was moved to 0x2000-0x2010. Update the location to get the correct shadow offset. Fixes: 6788958e4f3c ("PCI: vmd: Assign membar addresses from shadow registers") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+
2019-09-17PCI: vmd: Fix config addressing when using bus offsetsJon Derrick1-7/+9
VMD maps child device config spaces to the VMD Config BAR linearly regardless of the starting bus offset. Because of this, the config address decode must ignore starting bus offsets when mapping the BDF to the config space address. Fixes: 2a5a9c9a20f9 ("PCI: vmd: Add offset to bus numbers if necessary") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+
2019-09-16Merge tag 'please-pull-ia64_for_5.4' of ↵Linus Torvalds3-710/+0
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 updates from Tony Luck: "The big change here is removal of support for SGI Altix" * tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits) genirq: remove the is_affinity_mask_valid hook ia64: remove CONFIG_SWIOTLB ifdefs ia64: remove support for machvecs ia64: move the screen_info setup to common code ia64: move the ROOT_DEV setup to common code ia64: rework iommu probing ia64: remove the unused sn_coherency_id symbol ia64: remove the SGI UV simulator support ia64: remove the zx1 swiotlb machvec ia64: remove CONFIG_ACPI ifdefs ia64: remove CONFIG_PCI ifdefs ia64: remove the hpsim platform ia64: remove now unused machvec indirections ia64: remove support for the SGI SN2 platform drivers: remove the SGI SN2 IOC4 base support drivers: remove the SGI SN2 IOC3 base support qla2xxx: remove SGI SN2 support qla1280: remove SGI SN2 support misc/sgi-xp: remove SGI SN2 support char/mspec: remove SGI SN2 support ...
2019-09-16PCI: dwc: Add validation that PCIe core is set to correct modeJonathan Chocron2-0/+24
Some PCIe controllers can be set to either Host or EP according to some early boot FW. To make sure there is no discrepancy (e.g. FW configured the port to EP mode while the DT specifies it as a host bridge or vice versa), a check has been added for each mode. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-09-16PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driverJonathan Chocron2-0/+377
This driver is DT based and utilizes the DesignWare APIs. It allows using a smaller ECAM range for a larger bus range - usually an entire bus uses 1MB of address space, but the driver can use it for a larger number of buses. This is achieved by using a HW mechanism which allows changing the BUS part of the "final" outgoing config transaction. There are 2 HW regs, one which is basically a bitmask determining which bits to take from the AXI transaction itself and another which holds the complementary part programmed by the driver. All link initializations are handled by the boot FW. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-16PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root PortJonathan Chocron1-0/+18
The Root Port (identified by [1c36:0031]) doesn't support MSI-X. On some platforms it is configured to not advertise the capability at all, while on others it (mistakenly) does. This causes a panic during initialization by the pcieport driver, since it tries to configure the MSI-X capability. Specifically, when trying to access the MSI-X table a "non-existing addr" exception occurs. Example stacktrace snippet: SError Interrupt on CPU2, code 0xbf000000 -- SError CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __pci_enable_msix_range+0x4e4/0x608 lr : __pci_enable_msix_range+0x498/0x608 sp : ffffff80117db700 x29: ffffff80117db700 x28: 0000000000000001 x27: 0000000000000001 x26: 0000000000000000 x25: ffffffd3e9d8c0b0 x24: 0000000000000000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 x20: 0000000000000000 x19: ffffffd3e9d8c000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffffff80116496c8 x14: ffffffd3e9844503 x13: ffffffd3e9844502 x12: 0000000000000038 x11: ffffffffffffff00 x10: 0000000000000040 x9 : ffffff801165e270 x8 : ffffff801165e268 x7 : 0000000000000002 x6 : 00000000000000b2 x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffd3e9844680 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) Call trace: dump_backtrace+0x0/0x140 show_stack+0x14/0x20 dump_stack+0xa8/0xcc panic+0x140/0x334 nmi_panic+0x6c/0x70 arm64_serror_panic+0x74/0x88 __pte_error+0x0/0x28 el1_error+0x84/0xf8 __pci_enable_msix_range+0x4e4/0x608 pci_alloc_irq_vectors_affinity+0xdc/0x150 pcie_port_device_register+0x2b8/0x4e0 pcie_portdrv_probe+0x34/0xf0 Notice that this quirk also disables MSI (which may work, but hasn't been tested nor has a current use case), since currently there is no standard way to disable only MSI-X. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-16PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root PortJonathan Chocron1-0/+6
The Amazon Annapurna Labs PCIe Root Port exposes the VPD capability, but there is no actual support for it. Trying to access the VPD (for example, as part of lspci -vv or when reading the vpd sysfs file), results in the following warning print: pcieport 0001:00:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-16PCI: Add ACS quirk for Amazon Annapurna Labs root portsAli Saidi1-0/+20
The Amazon's Annapurna Labs root ports don't advertise an ACS capability, but they don't allow peer-to-peer transactions and do validate bus numbers through the SMMU. Additionally, it's not possible for one RP to pass traffic to another RP. Signed-off-by: Ali Saidi <alisaidi@amazon.com> Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-10PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbersHaiyang Zhang1-1/+1
As recommended by Azure host team, the bytes 4, 5 have more uniqueness (info entropy) than bytes 8, 9 so use them as the PCI domain numbers. On older hosts, bytes 4, 5 can also be used -- no backward compatibility issues are introduced and the chance of collision is greatly reduced. In the rare cases of collision, the driver code detects and finds another number that is not in use. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Sasha Levin <sashal@kernel.org>
2019-09-08PCI: tegra: Add Tegra194 PCIe supportVidya Sagar4-1/+1653
Add support for Synopsys DesignWare core IP based PCIe host controller present in the Tegra194 SoC. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-07PCI: Get rid of dev->has_secondary_link flagMika Westerberg5-27/+37
In some systems, the Device/Port Type in the PCI Express Capabilities register incorrectly identifies upstream ports as downstream ports. d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") addressed this by adding pci_dev.has_secondary_link, which is set for downstream ports. But this is confusing because pci_pcie_type() sometimes gives the wrong answer, and it's not obvious that we should use pci_dev.has_secondary_link instead. Reduce the confusion by correcting the type of the port itself so that pci_pcie_type() returns the actual type regardless of what the Device/Port Type register claims it is. Update the users to call pci_pcie_type() and pcie_downstream_port() accordingly, and remove pci_dev.has_secondary_link completely. Link: https://lore.kernel.org/linux-pci/20190703133953.GK128603@google.com/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20190822085553.62697-2-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-07PCI: Make pcie_downstream_port() available outside of access.cMika Westerberg2-9/+9
pcie_downstream_port() is useful in other places where code needs to determine whether the PCIe port is downstream so make it available outside of access.c. Link: https://lore.kernel.org/r/20190822085553.62697-1-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-06Merge tag 'irqchip-5.4' of ↵Thomas Gleixner1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for Linux 5.4 from Marc Zyngier: - Large GICv3 updates to support new PPI and SPI ranges - Conver all alloc_fwnode() users to use PAs instead of VAs - Add support for Marvell's MMP3 irqchip - Add support for Amlogic Meson SM1 - Various cleanups and fixes
2019-09-05PCI: Add ACS quirk for iProc PAXBAbhinav Ratna1-0/+14
iProc PAXB Root Ports don't advertise an ACS capability, but they do not allow peer-to-peer transactions between Root Ports. Add an ACS quirk so each Root Port can be in a separate IOMMU group. [bhelgaas: commit log, comment, use common implementation style] Link: https://lore.kernel.org/r/1566275985-25670-1-git-send-email-srinath.mannam@broadcom.com Signed-off-by: Abhinav Ratna <abhinav.ratna@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Scott Branden <scott.branden@broadcom.com>
2019-09-05PCI: Force trailing new line to resource_alignment_param in sysfsLogan Gunthorpe1-0/+10
When 'pci=resource_alignment=' is specified on the command line, there is no trailing new line. Then, when it's read through the corresponding sysfs attribute, there will be no newline and a cat command will not show correctly in a shell. If the parameter is set through sysfs a new line will be stored and it will 'cat' correctly. To solve this, append a new line character in the show function if one does not already exist. Link: https://lore.kernel.org/r/20190822161013.5481-4-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: Move pci_[get|set]_resource_alignment_param() into their callersLogan Gunthorpe1-20/+12
Both the functions pci_get_resource_alignment_param() and pci_set_resource_alignment_param() are now only called in one place: resource_alignment_show() and resource_alignment_store() respectively. There is no value in this extra set of functions so move both into their callers respectively. [bhelgaas: fold in "GFP_KERNEL while atomic" fix from Christoph Hellwig <hch@infradead.org> https://lore.kernel.org/r/20190902075006.GB754@infradead.org] Link: https://lore.kernel.org/r/20190822161013.5481-3-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: pciehp: Refer to "Indicators" instead of "LEDs" in commentsBjorn Helgaas2-3/+3
The PCIe spec doesn't mention "green LEDs" or "amber LEDs". Replace those terms with "Power Indicator" and "Attention Indicator" so the comments match the spec language. Comment changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: pciehp: Remove pciehp_green_led_{on,off,blink}()Denis Efremov3-43/+7
Remove pciehp_green_led_{on,off,blink}() and use pciehp_set_indicators() instead, since the code is mostly the same. [bhelgaas: drop set_power_indicator() wrapper to reduce the number of interfaces] Link: https://lore.kernel.org/r/20190903111021.1559-5-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-09-05PCI: pciehp: Remove pciehp_set_attention_status()Denis Efremov3-28/+7
Remove pciehp_set_attention_status() and use pciehp_set_indicators() instead, since the code is mostly the same. Link: https://lore.kernel.org/r/20190903111021.1559-4-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-09-05PCI: pciehp: Combine adjacent indicator updatesDenis Efremov2-13/+17
Combine adjacent updates of power and attention indicators into a single pciehp_set_indicators() call. This sends one command to the hotplug controller instead of two. Link: https://lore.kernel.org/r/20190903111021.1559-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2019-09-05PCI: pciehp: Add pciehp_set_indicators() to set both indicatorsDenis Efremov2-0/+39
Add pciehp_set_indicators() to set power and attention indicators with a single register write. This is a minor optimization because we frequently set both indicators and this can do it with a single command. It also reduces the number of interfaces related to the indicators and makes them more discoverable because callers use the PCI_EXP_SLTCTL_ATTN_IND_* and PCI_EXP_SLTCTL_PWR_IND_* definitions directly. [bhelgaas: extend commit log, s/PCI_EXP_SLTCTL_.*_IND_NONE/INDICATOR_NOOP/ so they don't look like things defined by the spec, add function doc, mask commands to make it obvious we only send valid commands (pcie_do_write_cmd() does mask it, but requires more effort to verify)] Link: https://lore.kernel.org/r/20190903111021.1559-2-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: Clean up resource_alignment parameter to not require static bufferLogan Gunthorpe1-18/+23
Clean up the 'resource_alignment' parameter code to use kstrdup() in the initcall routine instead of a static buffer that wastes memory regardless of whether the feature is used. This allows us to drop 'COMMAND_LINE_SIZE' bytes (typically 256-4096 depending on architecture) of static data. This is similar to what has been done for the 'disable_acs_redir' parameter. Link: https://lore.kernel.org/r/20190822161013.5481-2-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: Use static const struct, not const static structKrzysztof Wilczynski1-2/+2
Move the static keyword to the front of declarations of pci_regs_behavior[] and pcie_cap_regs_behavior[], which resolves compiler warnings when building with "W=1": drivers/pci/pci-bridge-emul.c:41:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] const static struct pci_bridge_reg_behavior pci_regs_behavior[] = { ^ drivers/pci/pci-bridge-emul.c:176:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] const static struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = { ^ Link: https://lore.kernel.org/r/20190826151436.4672-1-kw@linux.com Link: https://lore.kernel.org/r/20190828131733.5817-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 08:27:14 +0000