summaryrefslogtreecommitdiffstats
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2014-10-23PCI / PM: handle failure to enable wakeup on PCIe PMELucas Stach1-2/+4
If the irqchip handling the PCIe PME interrupt is not able to enable interrupt wakeup we should properly reflect this in the PME suspend status. This fixes a kernel warning on resume, where it would try to disable the irq wakeup that failed to be activated while suspending, for example: WARNING: CPU: 0 PID: 609 at kernel/irq/manage.c:536 irq_set_irq_wake+0xc0/0xf8() Unbalanced IRQ 384 wake disable Fixes: 76cde7e49590 (PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle) Reported-and-tested-by: Richard Zhu <richard.zhu@freescale.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-11Merge tag 'stable/for-linus-3.18-rc0-tag' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from David Vrabel: "Features and fixes: - Add pvscsi frontend and backend drivers. - Remove _PAGE_IOMAP PTE flag, freeing it for alternate uses. - Try and keep memory contiguous during PV memory setup (reduces SWIOTLB usage). - Allow front/back drivers to use threaded irqs. - Support large initrds in PV guests. - Fix PVH guests in preparation for Xen 4.5" * tag 'stable/for-linus-3.18-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (22 commits) xen: remove DEFINE_XENBUS_DRIVER() macro xen/xenbus: Remove BUG_ON() when error string trucated xen/xenbus: Correct the comments for xenbus_grant_ring() x86/xen: Set EFER.NX and EFER.SCE in PVH guests xen: eliminate scalability issues from initrd handling xen: sync some headers with xen tree xen: make pvscsi frontend dependant on xenbus frontend arm{,64}/xen: Remove "EXPERIMENTAL" in the description of the Xen options xen-scsifront: don't deadlock if the ring becomes full x86: remove the Xen-specific _PAGE_IOMAP PTE flag x86/xen: do not use _PAGE_IOMAP PTE flag for I/O mappings x86: skip check for spurious faults for non-present faults xen/efi: Directly include needed headers xen-scsiback: clean up a type issue in scsiback_make_tpg() xen-scsifront: use GFP_ATOMIC under spin_lock MAINTAINERS: Add xen pvscsi maintainer xen-scsiback: Add Xen PV SCSI backend driver xen-scsifront: Add Xen PV SCSI frontend driver xen: Add Xen pvSCSI protocol description xen/events: support threaded irqs for interdomain event channels ...
2014-10-11Merge tag 'vfio-v3.18-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds1-0/+2
Pull VFIO updates from Alex Williamson: - Nested IOMMU extension to type1 (Will Deacon) - Restore MSIx message before enabling (Gavin Shan) - Fix remove path locking (Alex Williamson) * tag 'vfio-v3.18-rc1' of git://github.com/awilliam/linux-vfio: vfio-pci: Fix remove path locking drivers/vfio: Export vfio_spapr_iommu_eeh_ioctl() with GPL vfio/pci: Restore MSIx message prior to enabling PCI: Export MSI message relevant functions vfio/iommu_type1: add new VFIO_TYPE1_NESTING_IOMMU IOMMU type iommu: introduce domain attribute for nesting IOMMUs
2014-10-09Merge tag 'pm+acpi-3.18-rc1' of ↵Linus Torvalds1-10/+51
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "Features-wise, to me the most important this time is a rework of wakeup interrupts handling in the core that makes them work consistently across all of the available sleep states, including suspend-to-idle. Many thanks to Thomas Gleixner for his help with this work. Second is an update of the generic PM domains code that has been in need of some care for quite a while. Unused code is being removed, DT support is being added and domains are now going to be attached to devices in bus type code in analogy with the ACPI PM domain. The majority of work here was done by Ulf Hansson who also has been the most active developer this time. Apart from this we have a traditional ACPICA update, this time to upstream version 20140828 and a few ACPI wakeup interrupts handling patches on top of the general rework mentioned above. There also are several cpufreq commits including renaming the cpufreq-cpu0 driver to cpufreq-dt, as this is what implements generic DT-based cpufreq support, and a new DT-based idle states infrastructure for cpuidle. In addition to that, the ACPI LPSS driver is updated, ACPI support for Apple machines is improved, a few bugs are fixed and a few cleanups are made all over. Finally, the Adaptive Voltage Scaling (AVS) subsystem now has a tree maintained by Kevin Hilman that will be merged through the PM tree. Numbers-wise, the generic PM domains update takes the lead this time with 32 non-merge commits, second is cpufreq (15 commits) and the 3rd place goes to the wakeup interrupts handling rework (13 commits). Specifics: - Rework the handling of wakeup IRQs by the IRQ core such that all of them will be switched over to "wakeup" mode in suspend_device_irqs() and in that mode the first interrupt will abort system suspend in progress or wake up the system if already in suspend-to-idle (or equivalent) without executing any interrupt handlers. Among other things that eliminates the wakeup-related motivation to use the IRQF_NO_SUSPEND interrupt flag with interrupts which don't really need it and should not use it (Thomas Gleixner and Rafael Wysocki) - Switch over ACPI to handling wakeup interrupts with the help of the new mechanism introduced by the above IRQ core rework (Rafael Wysocki) - Rework the core generic PM domains code to eliminate code that's not used, add DT support and add a generic mechanism by which devices can be added to PM domains automatically during enumeration (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa). - Add debugfs-based mechanics for debugging generic PM domains (Maciej Matraszek). - ACPICA update to upstream version 20140828. Included are updates related to the SRAT and GTDT tables and the _PSx methods are in the METHOD_NAME list now (Bob Moore and Hanjun Guo). - Add _OSI("Darwin") support to the ACPI core (unfortunately, that can't really be done in a straightforward way) to prevent Thunderbolt from being turned off on Apple systems after boot (or after resume from system suspend) and rework the ACPI Smart Battery Subsystem (SBS) driver to work correctly with Apple platforms (Matthew Garrett and Andreas Noever). - ACPI LPSS (Low-Power Subsystem) driver update cleaning up the code, adding support for 133MHz I2C source clock on Intel Baytrail to it and making it avoid using UART RTS override with Auto Flow Control (Heikki Krogerus). - ACPI backlight updates removing the video_set_use_native_backlight quirk which is not necessary any more, making the code check the list of output devices returned by the _DOD method to avoid creating acpi_video interfaces that won't work and adding a quirk for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak) - New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin) - Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes, Sudip Mukherjee, Yijing Wang, and Zhang Rui) - cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy, Rasmus Villemoes) - cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name change among other things), ppc-corenet, powernv (Viresh Kumar, Preeti U Murthy, Shilpasri G Bhat, Lucas Stach) - cpuidle support for DT-based idle states infrastructure, new ARM64 cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi, Rasmus Villemoes) - ARM big.LITTLE cpuidle driver updates: support for DT-based initialization and Exynos5800 compatible string (Lorenzo Pieralisi, Kevin Hilman) - Rework of the test_suspend kernel command line argument and a new trace event for console resume (Srinivas Pandruvada, Todd E Brandt) - Second attempt to optimize swsusp_free() (hibernation core) to make it avoid going through all PFNs which may be way too slow on some systems (Joerg Roedel) - devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide). - rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS entry update in MAINTAINERS (Heiko Stübner, Kevin Hilman) - PM core fix related to clock management (Geert Uytterhoeven) - PM core's sysfs code cleanup (Johannes Berg)" * tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (105 commits) ACPI / fan: printk replacement PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME PM / Domains: Rename cpu_data to cpuidle_data cpufreq: cpufreq-dt: fix potential double put of cpu OF node cpufreq: cpu0: rename driver and internals to 'cpufreq_dt' PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free() cpufreq: ppc-corenet: remove duplicate update of cpu_data ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle PM / sleep: Rename platform suspend/resume functions in suspend.c PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq() ACPICA: Introduce acpi_enable_all_wakeup_gpes() ACPICA: Clear all non-wakeup GPEs in acpi_hw_enable_wakeup_gpe_block() ACPI / video: check _DOD list when creating backlight devices PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h cpufreq: Replace strnicmp with strncasecmp cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec cpufreq: powernv: Set the pstate of the last hotplugged out cpu in policy->cpus to minimum cpufreq: Allow stop CPU callback to be used by all cpufreq drivers PM / devfreq: exynos: Enable building exynos PPMU as module PM / devfreq: Export helper functions for drivers ...
2014-10-09Merge tag 'pci-v3.18-changes' of ↵Linus Torvalds50-1067/+3759
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The interesting things here are: - Turn on Config Request Retry Status Software Visibility. This caused hangs last time, but we included a fix this time. - Rework PCI device configuration to use _HPP/_HPX more aggressively - Allow PCI devices to be put into D3cold during system suspend - Add arm64 PCI support - Add APM X-Gene host bridge driver - Add TI Keystone host bridge driver - Add Xilinx AXI host bridge driver More detailed summary: Enumeration - Check Vendor ID only for Config Request Retry Status (Rajat Jain) - Enable Config Request Retry Status when supported (Rajat Jain) - Add generic domain handling (Catalin Marinas) - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado) Resource management - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu) - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Move _HPP & _HPX handling into core (Bjorn Helgaas) - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas) - Apply _HPP/_HPX to display devices (Bjorn Helgaas) - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas) - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas) - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas) - Fix wait time in pciehp timeout message (Yinghai Lu) - Add more pciehp Slot Control debug output (Yinghai Lu) - Stop disabling pciehp notifications during init (Yinghai Lu) MSI - Remove arch_msi_check_device() (Alexander Gordeev) - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev) - Move D0 check into pci_msi_check_device() (Alexander Gordeev) - Remove unused kobject from struct msi_desc (Yijing Wang) - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang) - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang) - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang) - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang) - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang) Power management - Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki) - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki) AER - Add additional AER error strings (Gong Chen) - Make <linux/aer.h> standalone includable (Thierry Reding) Virtualization - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson) - Add ACS quirk for Intel 10G NICs (Alex Williamson) - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp) - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson) - Add device flag helpers (Ethan Zhao) - Assume all Mellanox devices have broken INTx masking (Gavin Shan) Generic host bridge driver - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau) - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau) - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau) - Fix the conversion of IO ranges into IO resources (Liviu Dudau) - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau) - Add support for parsing PCI host bridge resources from DT (Liviu Dudau) - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau) - Add arm64 architectural support for PCI (Liviu Dudau) APM X-Gene - Add APM X-Gene PCIe driver (Tanmay Inamdar) - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar) Freescale i.MX6 - Probe in module_init(), not fs_initcall() (Lucas Stach) - Delay enabling reference clock for SS until it stabilizes (Tim Harvey) Marvell MVEBU - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni) NVIDIA Tegra - Make sure the PCIe PLL is really reset (Eric Yuen) - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang) - Fix extended configuration space mapping (Peter Daifuku) - Implement resource hierarchy (Thierry Reding) - Clear CLKREQ# enable on port disable (Thierry Reding) - Add Tegra124 support (Thierry Reding) ST Microelectronics SPEAr13xx - Pass config resource through reg property (Pratyush Anand) Synopsys DesignWare - Use NULL instead of false (Fabio Estevam) - Parse bus-range property from devicetree (Lucas Stach) - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach) - Remove pci_assign_unassigned_resources() (Lucas Stach) - Check private_data validity in single place (Lucas Stach) - Setup and clear exactly one MSI at a time (Lucas Stach) - Remove open-coded bitmap operations (Lucas Stach) - Fix configuration base address when using 'reg' (Minghuan Lian) - Fix IO resource end address calculation (Minghuan Lian) - Rename get_msi_data() to get_msi_addr() (Minghuan Lian) - Add get_msi_data() to pcie_host_ops (Minghuan Lian) - Add support for v3.65 hardware (Murali Karicheri) - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand) TI Keystone - Add TI Keystone PCIe driver (Murali Karicheri) - Limit MRSS for all downstream devices (Murali Karicheri) - Assume controller is already in RC mode (Murali Karicheri) - Set device ID based on SoC to support multiple ports (Murali Karicheri) Xilinx AXI - Add Xilinx AXI PCIe driver (Srikanth Thokala) - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter) Miscellaneous - Clean up whitespace (Quentin Lambert) - Remove assignments from "if" conditions (Quentin Lambert) - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri) - x86: Mark DMI tables as initialization data (Mathias Krause) - x86: Move __init annotation to the correct place (Mathias Krause) - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause) - x86: Constify pci_mmcfg_probes[] array (Mathias Krause) - x86: Mark PCI BIOS initialization code as such (Mathias Krause) - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya) - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)" * tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits) arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: Add ACS quirk for AMD A88X southbridge devices PCI: xgene: Add APM X-Gene PCIe driver PCI: designware: Remove open-coded bitmap operations PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() ... Conflicts: arch/arm64/boot/dts/apm-storm.dtsi
2014-10-07Merge branch 'pm-genirq'Rafael J. Wysocki1-10/+51
* pm-genirq: PM / genirq: Document rules related to system suspend and interrupts PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle x86 / PM: Set IRQCHIP_SKIP_SET_WAKE for IOAPIC IRQ chip objects genirq: Simplify wakeup mechanism genirq: Mark wakeup sources as armed on suspend genirq: Create helper for flow handler entry check genirq: Distangle edge handler entry genirq: Avoid double loop on suspend genirq: Move MASK_ON_SUSPEND handling into suspend_device_irqs() genirq: Make use of pm misfeature accounting genirq: Add sanity checks for PM options on shared interrupt lines genirq: Move suspend/resume logic into irq/pm code PM / sleep: Mechanism for aborting system suspends unconditionally
2014-10-06Merge branch 'pci/host-xgene' into nextBjorn Helgaas3-1/+670
* pci/host-xgene: arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: xgene: Add APM X-Gene PCIe driver Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
2014-10-06Merge branch 'pci/virtualization' into nextBjorn Helgaas1-0/+7
* pci/virtualization: PCI: Add ACS quirk for AMD A88X southbridge devices
2014-10-06xen: remove DEFINE_XENBUS_DRIVER() macroDavid Vrabel1-2/+4
The DEFINE_XENBUS_DRIVER() macro looks a bit weird and causes sparse errors. Replace the uses with standard structure definitions instead. This is similar to pci and usb device registration. Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-10-02PCI: Add ACS quirk for AMD A88X southbridge devicesMarti Raudsepp1-0/+7
AMD has confirmed that peer-to-peer between two southbridge functions does not occur. Add a quirk to indicate that these functions are isolated even though they don't have an ACS capability. Link: https://bugzilla.kernel.org/show_bug.cgi?id=81841 Signed-off-by: Marti Raudsepp <marti@juffo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joel Schopp <joel.schopp@amd.com>
2014-10-01Merge branch 'pci/host-designware' into nextBjorn Helgaas1-83/+14
* pci/host-designware: PCI: designware: Remove open-coded bitmap operations PCI: designware: Setup and clear exactly one MSI at a time Conflicts: drivers/pci/host/pcie-designware.c
2014-10-01Merge branch 'pci/resource' into nextBjorn Helgaas1-1/+1
* pci/resource: PCI: Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources()
2014-10-01PCI: xgene: Add APM X-Gene PCIe driverTanmay Inamdar3-0/+670
Add the AppliedMicro X-Gene SOC PCIe host controller driver. The X-Gene PCIe controller supports up to 8 lanes and GEN3 speed. The X-Gene SOC supports up to 5 PCIe ports. [bhelgaas: folded in MAINTAINERS and bindings updates] Tested-by: Ming Lei <ming.lei@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> (driver)
2014-10-01PCI: designware: Remove open-coded bitmap operationsLucas Stach1-44/+7
Replace them by using the standard kernel bitmap ops. No functional change, but makes the code a lot cleaner. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pratyush Anand <pratyush.anand@st.com> Acked-by: Jingoo Han <jg1.han@samsung.com>
2014-10-01Merge branch 'pci/msi' into nextBjorn Helgaas3-80/+39
* pci/msi: PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() Conflicts: drivers/pci/host/pcie-designware.c
2014-10-01Merge branch 'pci/host-generic' into nextBjorn Helgaas4-12/+72
* pci/host-generic: arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() PCI: Add generic domain handling of/pci: Fix the conversion of IO ranges into IO resources of/pci: Move of_pci_range_to_resource() to of/address.c ARM: Define PCI_IOBASE as the base of virtual PCI IO space of/pci: Add pci_register_io_range() and pci_pio_to_address() asm-generic/io.h: Fix ioport_map() for !CONFIG_GENERIC_IOMAP Conflicts: drivers/pci/host/pci-tegra.c
2014-10-01Merge branches 'pci/aer' and 'pci/virtualization' into nextBjorn Helgaas2-8/+37
* pci/aer: PCI/AER: Rename PCI_ERR_UNC_TRAIN to PCI_ERR_UNC_UND PCI/AER: Add additional PCIe AER error strings trace, RAS: Add additional PCIe AER error strings trace, RAS: Replace bare numbers with #defines for PCIe AER error strings * pci/virtualization: PCI: Add ACS quirk for Intel 10G NICs
2014-10-01PCI/MSI: Remove unnecessary temporary variableBjorn Helgaas1-3/+2
The only use of "status" is to hold a value which is immediately returned, so just return and remove the variable directly. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-10-01PCI/MSI: Use __write_msi_msg() instead of write_msi_msg()Yijing Wang1-1/+1
default_restore_msi_irq() already has the struct msi_desc pointer required by __write_msi_msg(), so call it directly instead of having write_msi_msg() look it up from the IRQ. No functional change. [bhelgaas: split into separate patch] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-10-01PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpointsYijing Wang1-20/+19
The "msi_bus" sysfs file for bridges sets a bus flag to allow or disallow future driver requests for MSI or MSI-X. Previously, the sysfs file existed for endpoints but did nothing. Add "msi_bus" support for endpoints, so an administrator can prevent the use of MSI and MSI-X for individual devices. Note that as for bridges, these changes only affect future driver requests for MSI or MSI-X, so drivers may need to be reloaded. Add documentation for the "msi_bus" sysfs file. [bhelgaas: changelog, comments, add "subordinate", add endpoint printk, rework bus_flags setting, make bus_flags printk unconditional] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-10-01PCI/MSI: Remove "pos" from the struct msi_desc msi_attribYijing Wang2-5/+2
"msi_attrib.pos" is only used for MSI (not MSI-X), and we already cache the MSI capability offset in "dev->msi_cap". Remove "pos" from the struct msi_attrib and use "dev->msi_cap" directly. [bhelgaas: changelog, fix whitespace] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-10-01PCI/MSI: Remove unused kobject from struct msi_descYijing Wang1-11/+0
After commit 1c51b50c2995 ("PCI/MSI: Export MSI mode using attributes, not kobjects"), the kobject in struct msi_desc is unused. Remove the unused struct kobject from struct msi_desc. [bhelgaas: changelog] Fixes: 1c51b50c2995 ("PCI/MSI: Export MSI mode using attributes, not kobjects") Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-01PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported()Alexander Gordeev1-15/+12
Rename pci_msi_check_device() to pci_msi_supported() for clarity. Note that pci_msi_supported() returns true if MSI/MSI-X is supported, so code like: if (pci_msi_supported(...)) reads naturally. [bhelgaas: changelog, split to separate patch, reverse sense] Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-10-01PCI/MSI: Move D0 check into pci_msi_check_device()Alexander Gordeev1-17/+10
Both callers of pci_msi_check_device() check that the device is in D0 state, so move the check from the callers into pci_msi_check_device() itself. In pci_enable_msi_range(), note that pci_msi_check_device() never returns a positive value any more, so the loop that called it until it returns zero or negative is no longer necessary. [bhelgaas: changelog, split to separate patch] Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-10-01PCI/MSI: Remove arch_msi_check_device()Alexander Gordeev1-18/+3
No architectures implement arch_msi_check_device() or the struct msi_chip .check_device() method, so remove them. Remove the "type" parameter to pci_msi_check_device() because it was only used to call arch_msi_check_device() and is no longer needed. [bhelgaas: changelog, split to separate patch] Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-30PCI: Add pci_remap_iospace() to map bus I/O resourcesLiviu Dudau1-0/+31
Add pci_remap_iospace() to map bus I/O resources into the CPU virtual address space. Architectures with special needs may provide their own version, but most should be able to use this one. This function is useful for PCI host bridge drivers that need to map the PCI I/O resources into virtual memory space. [bhelgaas: phys_addr description, drop temporary "err" variable] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> CC: Arnd Bergmann <arnd@arndb.de>
2014-09-30of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr()Liviu Dudau1-0/+9
Add pci_get_new_domain_nr() to allocate a new domain number and of_get_pci_domain_nr() to retrieve the PCI domain number of a given device from DT. Host bridge drivers or architecture-specific code can choose to implement their PCI domain number policy using these two functions. Using of_get_pci_domain_nr() guarantees a stable PCI domain number on every boot provided that all host bridge controllers are assigned a number in the device tree using "linux,pci-domain" property. Mixing use of pci_get_new_domain_nr() and of_get_pci_domain_nr() is not recommended as it can lead to potentially conflicting domain numbers being assigned to root buses behind different host bridges. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Catalin Marinas <catalin.marinas@arm.com>
2014-09-30PCI: Add generic domain handlingCatalin Marinas1-3/+8
The handling of PCI domains (or PCI segments in ACPI speak) is usually a straightforward affair but its implementation is currently left to the architectural code, with pci_domain_nr(b) querying the value of the domain associated with bus b. This patch introduces CONFIG_PCI_DOMAINS_GENERIC as an option that can be selected if an architecture wants a simple implementation where the value of the domain associated with a bus is stored in struct pci_bus. The architectures that select CONFIG_PCI_DOMAINS_GENERIC will then have to implement pci_bus_assign_domain_nr() as a way of setting the domain number associated with a root bus. All child buses except the root bus will inherit the domain_nr value from their parent. Signed-off-by: Catalin Marinas <Catalin.Marinas@arm.com> [Renamed pci_set_domain_nr() to pci_bus_assign_domain_nr()] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Arnd Bergmann <arnd@arndb.de>
2014-09-30of/pci: Fix the conversion of IO ranges into IO resourcesLiviu Dudau2-9/+22
The ranges property for a host bridge controller in DT describes the mapping between the PCI bus address and the CPU physical address. The resources framework however expects that the IO resources start at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The conversion from PCI ranges to resources failed to take that into account, returning a CPU physical address instead of a port number. Also fix all the drivers that depend on the old behaviour by fetching the CPU physical address based on the port number where it is being needed. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Thierry Reding <thierry.reding@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Catalin Marinas <catalin.marinas@arm.com>
2014-09-30PCI: designware: Setup and clear exactly one MSI at a timeLucas Stach1-40/+7
The setup_irq function is supposed to set up exactly one MSI IRQ. Multiple IRQ setup is handled differently, to respect the choices made by the upper layers. Also only clear one MSI IRQ at a time; the PCI core will call into this function multiple times if it has to tear down more than one MSI IRQ. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pratyush Anand <pratyush.anand@st.com> Acked-by: Jingoo Han <jg1.han@samsung.com>
2014-09-30PCI: Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources()Yinghai Lu1-1/+1
In 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources"), we added IORESOURCE_MEM_64 to the mask in pci_assign_unassigned_root_bus_resources(), but not to the mask in pci_assign_unassigned_bridge_resources(). Add IORESOURCE_MEM_64 to the pci_assign_unassigned_bridge_resources() type mask. Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.16+
2014-09-29PCI: Add ACS quirk for Intel 10G NICsAlex Williamson1-6/+28
Intel has verified there is no peer-to-peer between functions for the below selection of 82598, 82599, and X520 10G NICs. These NICs lack an ACS capability, so we're not able to determine this isolation without the help of quirks. Generalize the Solarflare quirk and add these Intel 10G NICs. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: John Ronciak <John.ronciak@intel.com>
2014-09-29Merge branch 'pci/host-designware' into nextBjorn Helgaas5-11/+15
* pci/host-designware: PCI: designware: Add get_msi_data() to pcie_host_ops PCI: designware: Rename get_msi_data() to get_msi_addr() PCI: designware: Fix IO resource end address calculation PCI: designware: Fix configuration base address when using 'reg' PCI: designware: Use NULL instead of false [bhelgaas: Fixup keystone for "PCI: designware: Rename get_msi_data() to get_msi_addr()"]
2014-09-29PCI: Export MSI message relevant functionsGavin Shan1-0/+2
The patch exports 2 MSI message relevant functions, which will be used by VFIO PCI driver. The VFIO PCI driver would be built as a module. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-09-25Merge branches 'pci/enumeration', 'pci/virtualization' and 'pci/cleanup' ↵Bjorn Helgaas20-190/+149
into next * pci/enumeration: PCI: Generate uppercase hex for modalias interface class * pci/virtualization: PCI: Add ACS quirk for Solarflare SFC9120 & SFC9140 PCI: Remove unused pci_get_dma_source() PCI: Remove unused pci_find_upstream_pcie_bridge() * pci/cleanup: PCI: Remove assignment from complicated "if" conditions PCI: Remove assignment from "if" conditions PCI: Remove unnecessary curly braces PCI: Add space before open parenthesis
2014-09-25Merge branches 'pci/host-mvebu' and 'pci/host-spear' into nextBjorn Helgaas2-4/+4
* pci/host-mvebu: PCI: mvebu: Fix uninitialized variable in mvebu_get_tgt_attr() * pci/host-spear: PCI: spear: Pass config resource through reg property
2014-09-25PCI/AER: Add additional PCIe AER error stringsChen, Gong1-2/+9
Add strings for all AER error bits defined in PCIe r3.0. [bhelgaas: changelog, drop designated initializer change] Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-24Merge branches 'pci/hotplug', 'pci/initdata' and 'pci/misc' into nextBjorn Helgaas1-5/+10
* pci/hotplug: PCI: pciehp: Stop disabling notifications during init PCI: pciehp: Add more Slot Control debug output PCI: pciehp: Fix wait time in timeout message * pci/initdata: x86/PCI: Mark PCI BIOS initialization code as such x86/PCI: Constify pci_mmcfg_probes[] array x86/PCI: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst x86/PCI: Move __init annotation to the correct place x86/PCI: Mark DMI tables as initialization data * pci/misc: PCI: Move PCI_VENDOR_ID_VMWARE to pci_ids.h
2014-09-24Merge tag 'pci-v3.17-fixes-3' of ↵Linus Torvalds2-16/+6
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are a few fixes that should be in v3.17. - Reverting "Don't scan random busses" covers up a CardBus regression having to do with allocating CardBus bus numbers. - Reverting "Make sure bus numbers stay within parents bounds" covers up an ACPI _CRS bug that makes us reconfigure a bridge, causing a broken device behind it to stop responding. - The pciehp timeout change fixes some code we added in v3.17. Without the fix, we can send a new hotplug command too early, before the timeout has expired. I hope for better fixes for the reverts, but those will have to come after v3.17" * tag 'pci-v3.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: pciehp: Fix pcie_wait_cmd() timeout Revert "PCI: Make sure bus number resources stay within their parents bounds" Revert "PCI: Don't scan random busses in pci_scan_bridge()"
2014-09-24PCI: Remove assignment from complicated "if" conditionsQuentin Lambert1-4/+9
The modifications effectively change the value of len_tmp in the case where the first condition is not met. Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-24PCI: Remove assignment from "if" conditionsQuentin Lambert9-30/+66
The following Coccinelle semantic patch was used to find and correct cases of assignments in "if" conditions: @@ expression var, expr; statement S; @@ + var = expr; if( - (var = expr) + var ) S Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-24PCI: Remove unnecessary curly bracesQuentin Lambert8-36/+22
Remove curly braces in simple "if" cases. No functional change. Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-24PCI: Add space before open parenthesisQuentin Lambert8-39/+39
Add space before open parenthesis as is conventional. No functional change. [bhelgaas: fix a few more in ibmphp, shpchp] Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-24PCI: designware: Add get_msi_data() to pcie_host_opsMinghuan Lian2-1/+7
Add a struct pcie_host_ops .get_msi_data() method for platforms to return their special MSI message data. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com>
2014-09-24PCI: designware: Rename get_msi_data() to get_msi_addr()Minghuan Lian2-3/+3
The struct pcie_host_ops .get_msi_data() method returns the MSI message address. To accurately express its purpose, rename it to .get_msi_addr(). Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com>
2014-09-24PCI: designware: Fix IO resource end address calculationMinghuan Lian1-1/+1
End address should be equal to start_addr + size - 1. Fix PCI IO resource end address calculation. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com>
2014-09-24PCI: designware: Fix configuration base address when using 'reg'Minghuan Lian1-2/+0
The code has calculated cfg0_base and cfg1_base when parsing 'reg' or 'ranges' property of PCI DTS node, so remove duplicate calculation. When using 'reg', resource cfg is not used, so this code computed an incorrect configuration base. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com>
2014-09-23PCI: pciehp: Stop disabling notifications during initYinghai Lu1-3/+0
During pciehp initialization, we previously wrote two hotplug commands: pciehp_probe pcie_init pcie_disable_notification pcie_write_cmd # command 1 pcie_init_notification pcie_enable_notification pcie_write_cmd # command 2 For controllers with errata like Intel CF118, we previously waited for a timeout before issuing the second hotplug command because the first command only updates interrupt enable bits and is not a "real" hotplug command, so the controller doesn't report Command Completed for it. But there's no need to disable notifications in the first place. If BIOS left them enabled, we could easily take an interrupt before disabling them, so there's no benefit in disabling them for the tiny window before we enable them. Drop the unnecessary pcie_disable_notification() call. [bhelgaas: changelog] Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e7-v2-spec-update.html Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-23PCI: pciehp: Add more Slot Control debug outputYinghai Lu1-1/+9
Add more Slot Control debug output and move one print after pcie_write_cmd() to be consistent with other debug output. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-23PCI: pciehp: Fix wait time in timeout messageYinghai Lu1-1/+1
When we warned about a timeout on a hotplug command, we previously printed the time between calls to pcie_write_cmd(), without accounting for any time spent actually waiting. Consider this sequence: pcie_write_cmd write SLTCTL cmd_started = jiffies # T1 pcie_write_cmd pcie_wait_cmd now = jiffies # T2 wait_event_timeout # we may wait here if (timeout) ctrl_info("Timeout on command issued %u msec ago", jiffies_to_msecs(now - cmd_started)) We previously printed (T2 - T1), but that doesn't include the time spent in wait_event_timeout(). Fix this by using the current jiffies value, not the one cached before calling wait_event_timeout(). [bhelgaas: changelog, use current jiffies instead of adding timeout] Fixes: 40b960831cfa ("PCI: pciehp: Compute timeout from hotplug command start time") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 05:17:45 +0000