summaryrefslogtreecommitdiffstats
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2015-11-20Merge branches 'acpi-smbus', 'acpi-ec' and 'acpi-pci'Rafael J. Wysocki1-2/+2
* acpi-smbus: Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook" ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code * acpi-ec: ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query() * acpi-pci: PCI: Fix OF logic in pci_dma_configure()
2015-11-20PCI: Fix OF logic in pci_dma_configure()Suravee Suthikulpanit1-2/+2
This patch fixes a bug introduced by previous commit, which incorrectly checkes the of_node of the end-point device. Instead, it should check the of_node of the host bridge. Fixes: 50230713b639 ("PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()") Reported-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-12Merge tag 'pm+acpi-4.4-rc1-2' of ↵Linus Torvalds1-1/+31
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "The only new feature in this batch is support for the ACPI _CCA device configuration object, which it a pre-requisite for future ACPI PCI support on ARM64, but should not affect the other architectures. The rest is fixes and cleanups, mostly in cpufreq (including intel_pstate), the Operating Performace Points (OPP) framework and tools (cpupower and turbostat). Specifics: - Support for the ACPI _CCA configuration object intended to tell the OS whether or not a bus master device supports hardware managed cache coherency and a new set of functions to allow drivers to check the cache coherency support for devices in a platform firmware interface agnostic way (Suravee Suthikulpanit, Jeremy Linton). - ACPI backlight quirks for ESPRIMO Mobile M9410 and Dell XPS L421X (Aaron Lu, Hans de Goede). - Fixes for the arm_big_little and s5pv210-cpufreq cpufreq drivers (Jon Medhurst, Nicolas Pitre). - kfree()-related fixup for the recently introduced CPPC cpufreq frontend (Markus Elfring). - intel_pstate fix reducing kernel log noise on systems where P-states are managed by hardware (Prarit Bhargava). - intel_pstate maintainers information update (Srinivas Pandruvada). - cpufreq core optimization related to the handling of delayed work items used by governors (Viresh Kumar). - Locking fixes and cleanups of the Operating Performance Points (OPP) framework (Viresh Kumar). - Generic power domains framework cleanups (Lina Iyer). - cpupower tool updates (Jacob Tanenbaum, Sriram Raghunathan, Thomas Renninger). - turbostat tool updates (Len Brown)" * tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) PCI: ACPI: Add support for PCI device DMA coherency PCI: OF: Move of_pci_dma_configure() to pci_dma_configure() of/pci: Fix pci_get_host_bridge_device leak device property: ACPI: Remove unused DMA APIs device property: ACPI: Make use of the new DMA Attribute APIs device property: Adding DMA Attribute APIs for Generic Devices ACPI: Adding DMA Attribute APIs for ACPI Device device property: Introducing enum dev_dma_attr ACPI: Honor ACPI _CCA attribute setting cpufreq: CPPC: Delete an unnecessary check before the function call kfree() PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp() PM / OPP: Hold dev_opp_list_lock for writers PM / OPP: Protect updates to list_dev with mutex PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus() cpufreq: s5pv210-cpufreq: fix wrong do_div() usage MAINTAINERS: update for intel P-state driver Creating a common structure initialization pattern for struct option cpupower: Enable disabled Cstates if they are below max latency cpupower: Remove debug message when using cpupower idle-set -D switch cpupower: cpupower monitor reports uninitialized values for offline cpus ...
2015-11-07Merge branch 'acpi-pci'Rafael J. Wysocki1-1/+31
* acpi-pci: PCI: ACPI: Add support for PCI device DMA coherency PCI: OF: Move of_pci_dma_configure() to pci_dma_configure() of/pci: Fix pci_get_host_bridge_device leak device property: ACPI: Remove unused DMA APIs device property: ACPI: Make use of the new DMA Attribute APIs device property: Adding DMA Attribute APIs for Generic Devices ACPI: Adding DMA Attribute APIs for ACPI Device device property: Introducing enum dev_dma_attr ACPI: Honor ACPI _CCA attribute setting Conflicts: drivers/crypto/ccp/ccp-platform.c
2015-11-07PCI: ACPI: Add support for PCI device DMA coherencySuthikulpanit, Suravee1-1/+11
This patch adds support for setting up PCI device DMA coherency from ACPI _CCA object that should normally be specified in the DSDT node of its PCI host bridge. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-07PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()Suthikulpanit, Suravee1-1/+21
This patch move of_pci_dma_configure() to a more generic pci_dma_configure(), which can be extended by non-OF code (e.g. ACPI). This has no functional change. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Acked-by: Rob Herring <robh+dt@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-06Merge tag 'pci-v4.4-changes' of ↵Linus Torvalds33-640/+2561
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Resource management: - Add support for Enhanced Allocation devices (Sean O. Stalley) - Add Enhanced Allocation register entries (Sean O. Stalley) - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney) - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney) - Handle Enhanced Allocation capability for SR-IOV devices (David Daney) - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas) - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas) - Expand Enhanced Allocation BAR output (Bjorn Helgaas) - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier) - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Add sparc mem64 resource parsing for root bus (Yinghai Lu) PCI device hotplug: - pciehp: Queue power work requests in dedicated function (Guenter Roeck) Driver binding: - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker) Virtualization: - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck) - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck) - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck) - Reorder pcibios_sriov_disable() (Alexander Duyck) - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck) - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck) - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton) - Don't try to restore VF BARs (Wei Yang) MSI: - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel) - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach) - Export all remapped MSIs to sysfs attributes (Romain Bezut) - Disable MSI on SiS 761 (Ondrej Zary) AER: - Clear error status registers during enumeration and restore (Taku Izumi) Generic host bridge driver: - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Allow multiple hosts with different map_bus() methods (David Daney) - Pass starting bus number to pci_scan_root_bus() (David Daney) - Fix address window calculation for non-zero starting bus (David Daney) Altera host bridge driver: - Add msi.h to ARM Kbuild (Ley Foon Tan) - Add Altera PCIe host controller driver (Ley Foon Tan) - Add Altera PCIe MSI driver (Ley Foon Tan) APM X-Gene host bridge driver: - Remove msi_controller assignment (Duc Dang) Broadcom iProc host bridge driver: - Fix header comment "Corporation" misspelling (Florian Fainelli) - Fix code comment to match code (Ray Jui) - Remove unused struct iproc_pcie.irqs[] (Ray Jui) - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui) - Fix PCIe reset logic (Ray Jui) - Improve link detection logic (Ray Jui) - Update PCIe device tree bindings (Ray Jui) - Add outbound mapping support (Ray Jui) Freescale i.MX6 host bridge driver: - Return real error code from imx6_add_pcie_port() (Fabio Estevam) - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam) Freescale Layerscape host bridge driver: - Remove ls_pcie_establish_link() (Minghuan Lian) - Ignore PCIe controllers in Endpoint mode (Minghuan Lian) - Factor out SCFG related function (Minghuan Lian) - Update ls_add_pcie_port() (Minghuan Lian) - Remove unused fields from struct ls_pcie (Minghuan Lian) - Add support for LS1043a and LS2080a (Minghuan Lian) - Add ls_pcie_msi_host_init() (Minghuan Lian) HiSilicon host bridge driver: - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang) Marvell MVEBU host bridge driver: - Return zero for reserved or unimplemented config space (Russell King) - Use exact config access size; don't read/modify/write (Russell King) - Use of_get_available_child_count() (Russell King) - Use for_each_available_child_of_node() to walk child nodes (Russell King) - Report full node name when reporting a DT error (Russell King) - Use port->name rather than "PCIe%d.%d" (Russell King) - Move port parsing and resource claiming to separate function (Russell King) - Fix memory leaks and refcount leaks (Russell King) - Split port parsing and resource claiming from port setup (Russell King) - Use gpio_set_value_cansleep() (Russell King) - Use devm_kcalloc() to allocate an array (Russell King) - Use gpio_desc to carry around gpio (Russell King) - Improve clock/reset handling (Russell King) - Add PCI Express root complex capability block (Russell King) - Remove code restricting accesses to slot 0 (Russell King) NVIDIA Tegra host bridge driver: - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel) Renesas R-Car host bridge driver: - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven) - Build pcie-rcar.c only on ARM (Geert Uytterhoeven) - Make PCI aware of the I/O resources (Phil Edworthy) - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy) - Set root bus nr to that provided in DT (Phil Edworthy) - Fix I/O offset for multiple host bridges (Phil Edworthy) ST Microelectronics SPEAr13xx host bridge driver: - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni) Synopsys DesignWare host bridge driver: - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma) - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni) - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni) - Require config accesses to be naturally aligned (Gabriele Paoloni) - Make "num-lanes" an optional DT property (Gabriele Paoloni) - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni) - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni) - Factor out MSI msg setup (Lucas Stach) - Implement multivector MSI IRQ setup (Lucas Stach) - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach) - Set up high part of MSI target address (Lucas Stach) - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang) - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang) - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang) - Make driver arch-agnostic (Zhou Wang) Miscellaneous: - Make x86 pci_subsys_init() static (Alexander Kuleshov) - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)" * tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: altera: Add Altera PCIe MSI driver PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver PCI: layerscape: Add ls_pcie_msi_host_init() PCI: layerscape: Add support for LS1043a and LS2080a PCI: layerscape: Remove unused fields from struct ls_pcie PCI: layerscape: Update ls_add_pcie_port() PCI: layerscape: Factor out SCFG related function PCI: layerscape: Ignore PCIe controllers in Endpoint mode PCI: layerscape: Remove ls_pcie_establish_link() PCI: designware: Make "clocks" and "clock-names" optional DT properties PCI: designware: Make driver arch-agnostic ARM/PCI: Replace pci_sys_data->align_resource with global function pointer PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT Revert "PCI: designware: Program ATU with untranslated address" PCI: designware: Move calculation of bus addresses to DRA7xx PCI: designware: Make "num-lanes" an optional DT property PCI: designware: Require config accesses to be naturally aligned PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces PCI: designware: Use exact access size in dw_pcie_cfg_read() PCI: spear: Fix dw_pcie_cfg_read/write() usage ...
2015-11-04Merge tag 'pm+acpi-4.4-rc1-1' of ↵Linus Torvalds3-11/+67
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "Quite a new features are included this time. First off, the Collaborative Processor Performance Control interface (version 2) defined by ACPI will now be supported on ARM64 along with a cpufreq frontend for CPU performance scaling. Second, ACPI gets a new infrastructure for the early probing of IRQ chips and clock sources (along the lines of the existing similar mechanism for DT). Next, the ACPI core and the generic device properties API will now support a recently introduced hierarchical properties extension of the _DSD (Device Specific Data) ACPI device configuration object. If the ACPI platform firmware uses that extension to organize device properties in a hierarchical way, the kernel will automatically handle it and make those properties available to device drivers via the generic device properties API. It also will be possible to build the ACPICA's AML interpreter debugger into the kernel now and use that to diagnose AML-related problems more efficiently. In the future, this should make it possible to single-step AML execution and do similar things. Interesting stuff, although somewhat experimental at this point. Finally, the PM core gets a new mechanism that can be used by device drivers to distinguish between suspend-to-RAM (based on platform firmware support) and suspend-to-idle (or other variants of system suspend the platform firmware is not involved in) and possibly optimize their device suspend/resume handling accordingly. In addition to that, some existing features are re-organized quite substantially. First, the ACPI-based handling of PCI host bridges on x86 and ia64 is unified and the common code goes into the ACPI core (so as to reduce code duplication and eliminate non-essential differences between the two architectures in that area). Second, the Operating Performance Points (OPP) framework is reorganized to make the code easier to find and follow. Next, the cpufreq core's sysfs interface is reorganized to get rid of the "primary CPU" concept for configurations in which the same performance scaling settings are shared between multiple CPUs. Finally, some interfaces that aren't necessary any more are dropped from the generic power domains framework. On top of the above we have some minor extensions, cleanups and bug fixes in multiple places, as usual. Specifics: - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng). The most significant change is to allow the AML debugger to be built into the kernel. On top of that there is an update related to the NFIT table (the ACPI persistent memory interface) and a few fixes and cleanups. - ACPI CPPC2 (Collaborative Processor Performance Control v2) support along with a cpufreq frontend (Ashwin Chaugule). This can only be enabled on ARM64 at this point. - New ACPI infrastructure for the early probing of IRQ chips and clock sources (Marc Zyngier). - Support for a new hierarchical properties extension of the ACPI _DSD (Device Specific Data) device configuration object allowing the kernel to handle hierarchical properties (provided by the platform firmware this way) automatically and make them available to device drivers via the generic device properties interface (Rafael Wysocki). - Generic device properties API extension to obtain an index of certain string value in an array of strings, along the lines of of_property_match_string(), but working for all of the supported firmware node types, and support for the "dma-names" device property based on it (Mika Westerberg). - ACPI core fix to parse the MADT (Multiple APIC Description Table) entries in the order expected by platform firmware (and mandated by the specification) to avoid confusion on systems with more than 255 logical CPUs (Lukasz Anaczkowski). - Consolidation of the ACPI-based handling of PCI host bridges on x86 and ia64 (Jiang Liu). - ACPI core fixes to ensure that the correct IRQ number is used to represent the SCI (System Control Interrupt) in the cases when it has been re-mapped (Chen Yu). - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede). - ACPI EC driver fixes (Lv Zheng). - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri Kosina, Rami Rosen, Rasmus Villemoes). - New mechanism in the PM core allowing drivers to check if the platform firmware is going to be involved in the upcoming system suspend or if it has been involved in the suspend the system is resuming from at the moment (Rafael Wysocki). This should allow drivers to optimize their suspend/resume handling in some cases and the changes include a couple of users of it (the i8042 input driver, PCI PM). - PCI PM fix to prevent runtime-suspended devices with PME enabled from being resumed during system suspend even if they aren't configured to wake up the system from sleep (Rafael Wysocki). - New mechanism to report the number of a wakeup IRQ that woke up the system from sleep last time (Alexandra Yates). - Removal of unused interfaces from the generic power domains framework and fixes related to latency measurements in that code (Ulf Hansson, Daniel Lezcano). - cpufreq core sysfs interface rework to make it handle CPUs that share performance scaling settings (represented by a common cpufreq policy object) more symmetrically (Viresh Kumar). This should help to simplify the CPU offline/online handling among other things. - cpufreq core fixes and cleanups (Viresh Kumar). - intel_pstate fixes related to the Turbo Activation Ratio (TAR) mechanism on client platforms which causes the turbo P-states range to vary depending on platform firmware settings (Srinivas Pandruvada). - intel_pstate sysfs interface fix (Prarit Bhargava). - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G Bhat, Luis de Bethencourt). - cpuidle mvebu driver cleanups (Russell King). - OPP (Operating Performance Points) framework code reorganization to make it more maintainable (Viresh Kumar). - Intel Broxton support for the RAPL (Running Average Power Limits) power capping driver (Amy Wiles). - Assorted power management code fixes and cleanups (Dan Carpenter, Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus Villemoes)" * tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits) cpufreq: postfix policy directory with the first CPU in related_cpus cpufreq: create cpu/cpufreq/policyX directories cpufreq: remove cpufreq_sysfs_{create|remove}_file() cpufreq: create cpu/cpufreq at boot time cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate() PM / Domains: Merge measurements for PM QoS device latencies PM / Domains: Don't measure ->start|stop() latency in system PM callbacks PM / clk: Fix broken build due to non-matching code and header #ifdefs ACPI / Documentation: add copy_dsdt to ACPI format options ACPI / sysfs: correctly check failing memory allocation ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405 ACPI / CPPC: Fix potential memory leak ACPI / CPPC: signedness bug in register_pcc_channel() ACPI / PAD: power_saving_thread() is not freezable ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle ACPI: Using correct irq when waiting for events ACPI: Use correct IRQ when uninstalling ACPI interrupt handler cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver cpuidle: mvebu: clean up multiple platform drivers ...
2015-11-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds4-20/+101
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement delivers: - Rework the irqdomain core infrastructure to accomodate ACPI based systems. This is required to support ARM64 without creating artificial device tree nodes. - Sanitize the ACPI based ARM GIC initialization by making use of the new firmware independent irqdomain core - Further improvements to the generic MSI management - Generalize the irq migration on CPU hotplug - Improvements to the threaded interrupt infrastructure - Allow the migration of "chained" low level interrupt handlers - Allow optional force masking of interrupts in disable_irq[_nosysnc] - Support for two new interrupt chips - Sigh! - A larger set of errata fixes for ARM gicv3 - The usual pile of fixes, updates, improvements and cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) Document that IRQ_NONE should be returned when IRQ not actually handled PCI/MSI: Allow the MSI domain to be device-specific PCI: Add per-device MSI domain hook of/irq: Use the msi-map property to provide device-specific MSI domain of/irq: Split of_msi_map_rid to reuse msi-map lookup irqchip/gic-v3-its: Parse new version of msi-parent property PCI/MSI: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Add support code for multi-parent version of "msi-parent" irqchip/gic-v3-its: Add handling of PCI requester id. PCI/MSI: Add helper function pci_msi_domain_get_msi_rid(). of/irq: Add new function of_msi_map_rid() Docs: dt: Add PCI MSI map bindings irqchip/gic-v2m: Add support for multiple MSI frames irqchip/gic-v3: Fix translation of LPIs after conversion to irq_fwspec irqchip/mxs: Add Alphascale ASM9260 support irqchip/mxs: Prepare driver for hardware with different offsets irqchip/mxs: Panic if ioremap or domain creation fails irqdomain: Documentation updates irqdomain/msi: Use fwnode instead of of_node ...
2015-11-03Merge branch 'pci/host-layerscape' into nextBjorn Helgaas2-52/+149
* pci/host-layerscape: PCI: layerscape: Add ls_pcie_msi_host_init() PCI: layerscape: Add support for LS1043a and LS2080a PCI: layerscape: Remove unused fields from struct ls_pcie PCI: layerscape: Update ls_add_pcie_port() PCI: layerscape: Factor out SCFG related function PCI: layerscape: Ignore PCIe controllers in Endpoint mode PCI: layerscape: Remove ls_pcie_establish_link()
2015-11-03Merge branch 'pci/host-hisi' into nextBjorn Helgaas3-0/+207
* pci/host-hisi: PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver
2015-11-03Merge branches 'pci/host-altera', 'pci/host-designware', 'pci/host-generic', ↵Bjorn Helgaas21-464/+1737
'pci/host-imx6', 'pci/host-iproc', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-tegra' and 'pci/host-xgene' into next * pci/host-altera: PCI: altera: Add Altera PCIe MSI driver PCI: altera: Add Altera PCIe host controller driver ARM: Add msi.h to Kbuild * pci/host-designware: PCI: designware: Make "clocks" and "clock-names" optional DT properties PCI: designware: Make driver arch-agnostic ARM/PCI: Replace pci_sys_data->align_resource with global function pointer PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT Revert "PCI: designware: Program ATU with untranslated address" PCI: designware: Move calculation of bus addresses to DRA7xx PCI: designware: Make "num-lanes" an optional DT property PCI: designware: Require config accesses to be naturally aligned PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces PCI: designware: Use exact access size in dw_pcie_cfg_read() PCI: spear: Fix dw_pcie_cfg_read/write() usage PCI: designware: Set up high part of MSI target address PCI: designware: Make get_msi_addr() return phys_addr_t, not u32 PCI: designware: Implement multivector MSI IRQ setup PCI: designware: Factor out MSI msg setup PCI: Add msi_controller setup_irqs() method for special multivector setup PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK * pci/host-generic: PCI: generic: Fix address window calculation for non-zero starting bus PCI: generic: Pass starting bus number to pci_scan_root_bus() PCI: generic: Allow multiple hosts with different map_bus() methods arm64: dts: Drop linux,pci-probe-only from the Seattle DTS powerpc/PCI: Fix lookup of linux,pci-probe-only property PCI: generic: Fix lookup of linux,pci-probe-only property of/pci: Add of_pci_check_probe_only to parse "linux,pci-probe-only" * pci/host-imx6: PCI: imx6: Add PCIE_PHY_RX_ASIC_OUT_VALID definition PCI: imx6: Return real error code from imx6_add_pcie_port() * pci/host-iproc: PCI: iproc: Fix header comment "Corporation" misspelling PCI: iproc: Add outbound mapping support PCI: iproc: Update PCIe device tree bindings PCI: iproc: Improve link detection logic PCI: iproc: Fix PCIe reset logic PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM PCI: iproc: Remove unused struct iproc_pcie.irqs[] PCI: iproc: Fix code comment to match code * pci/host-mvebu: PCI: mvebu: Remove code restricting accesses to slot 0 PCI: mvebu: Add PCI Express root complex capability block PCI: mvebu: Improve clock/reset handling PCI: mvebu: Use gpio_desc to carry around gpio PCI: mvebu: Use devm_kcalloc() to allocate an array PCI: mvebu: Use gpio_set_value_cansleep() PCI: mvebu: Split port parsing and resource claiming from port setup PCI: mvebu: Fix memory leaks and refcount leaks PCI: mvebu: Move port parsing and resource claiming to separate function PCI: mvebu: Use port->name rather than "PCIe%d.%d" PCI: mvebu: Report full node name when reporting a DT error PCI: mvebu: Use for_each_available_child_of_node() to walk child nodes PCI: mvebu: Use of_get_available_child_count() PCI: mvebu: Use exact config access size; don't read/modify/write PCI: mvebu: Return zero for reserved or unimplemented config space * pci/host-rcar: PCI: rcar: Fix I/O offset for multiple host bridges PCI: rcar: Set root bus nr to that provided in DT PCI: rcar: Remove dependency on ARM-specific struct hw_pci PCI: rcar: Make PCI aware of the I/O resources PCI: rcar: Build pcie-rcar.c only on ARM PCI: rcar: Build pci-rcar-gen2.c only on ARM * pci/host-tegra: PCI: tegra: Wrap static pgprot_t initializer with __pgprot() * pci/host-xgene: PCI/MSI: xgene: Remove msi_controller assignment
2015-11-03PCI: altera: Add Altera PCIe MSI driverLey Foon Tan3-0/+321
Add Altera PCIe MSI driver. This soft IP supports a configurable number of vectors, which is a DTS parameter. [bhelgaas: Kconfig depend on PCIE_ALTERA, typos, whitespace] Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2015-11-02Merge branches 'pci/aer', 'pci/hotplug', 'pci/misc', 'pci/msi', ↵Bjorn Helgaas11-124/+466
'pci/resource' and 'pci/virtualization' into next * pci/aer: PCI/AER: Clear error status registers during enumeration and restore * pci/hotplug: PCI: pciehp: Queue power work requests in dedicated function * pci/misc: PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum x86/PCI: Make pci_subsys_init() static PCI: Add builtin_pci_driver() to avoid registration boilerplate PCI: Remove unnecessary "if" statement * pci/msi: x86/PCI: Don't alloc pcibios-irq when MSI is enabled PCI/MSI: Export all remapped MSIs to sysfs attributes PCI: Disable MSI on SiS 761 * pci/resource: sparc/PCI: Add mem64 resource parsing for root bus PCI: Expand Enhanced Allocation BAR output PCI: Make Enhanced Allocation bitmasks more obvious PCI: Handle Enhanced Allocation capability for SR-IOV devices PCI: Add support for Enhanced Allocation devices PCI: Add Enhanced Allocation register entries PCI: Handle IORESOURCE_PCI_FIXED when assigning resources PCI: Handle IORESOURCE_PCI_FIXED when sizing resources PCI: Clear IORESOURCE_UNSET when reverting to firmware-assigned address * pci/virtualization: PCI: Fix sriov_enable() error path for pcibios_enable_sriov() failures PCI: Wait 1 second between disabling VFs and clearing NumVFs PCI: Reorder pcibios_sriov_disable() PCI: Remove VFs in reverse order if virtfn_add() fails PCI: Remove redundant validation of SR-IOV offset/stride registers PCI: Set SR-IOV NumVFs to zero after enumeration PCI: Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs PCI: Don't try to restore VF BARs
2015-11-02PCI: hisi: Add HiSilicon SoC Hip05 PCIe driverZhou Wang3-0/+207
Add PCIe host support for HiSilicon SoC Hip05, related DT binding documentation, and maintainer update. [bhelgaas: changelog, 32-bit only config write warning text] Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: liudongdong <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org> (DT binding)
2015-11-02PCI: layerscape: Add ls_pcie_msi_host_init()Minghuan Lian1-0/+23
Layerscape PCIe has its own MSI implementation. Register ls_pcie_msi_host_init() to avoid using DesignWare's MSI. [bhelgaas: add comment] Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: layerscape: Add support for LS1043a and LS2080aMinghuan Lian2-5/+68
Both LS1043a and LS2080a are based on ARMv8 64-bit architecture and have similar PCIe implementation. LUT is added to controller. Add LS1043a and LS2080a support. [bhelgaas: move unused field removal into separate patch, include DT update] Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> (DT update) Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> (DT update)
2015-11-02PCI: layerscape: Remove unused fields from struct ls_pcieMinghuan Lian1-3/+0
Removed unused node, dev, and bus fields from struct ls_pcie. [bhelgaas: split into separate patch] Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: layerscape: Update ls_add_pcie_port()Minghuan Lian1-8/+5
Update the ls_add_pcie_port() signature to keep it consistent with the other DesignWare-based host drivers. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: layerscape: Factor out SCFG related functionMinghuan Lian1-26/+46
For the LS1021a PCIe controller, some status registers are located in SCFG, unlike other Layerscape devices. Move SCFG-related code to ls1021_pcie_host_init() and rename ls_pcie_link_up() to ls1021_pcie_link_up() because LTSSM status is also in SCFG. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: layerscape: Ignore PCIe controllers in Endpoint modeMinghuan Lian1-0/+13
Layerscape PCIe controller supports root complex (RC) and endpoint (EP) modes, which can be set by RCW. If not in RC mode, return -ENODEV without claiming the controller. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: layerscape: Remove ls_pcie_establish_link()Minghuan Lian1-16/+0
ls_pcie_establish_link() does not do any real operation, except to wait for the linkup establishment. In fact, this is not necessary. Moreover, each PCIe controller not inserted device will increase the Linux startup time about 200ms. Remove ls_pcie_establish_link(). Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: designware: Make driver arch-agnosticZhou Wang2-92/+39
Previously, dw_pcie_host_init() created the PCI host bridge with pci_common_init_dev(), an ARM-specific function that supplies the ARM- specific pci_sys_data structure as the PCI "sysdata". Make pcie-designware.c arch-agnostic by reimplementing the functionality of pci_common_init_dev() directly in dw_pcie_host_init(). Note that this changes the bridge sysdata from the ARM pci_sys_data to the DesignWare pcie_port structure. This doesn't affect the ARM sysdata users because they are all specific to non-DesignWare host bridges, which will still have pci_sys_data. [bhelgaas: changelog] Tested-by: James Morse <james.morse@arm.com> Tested-by: Gabriel Fernandez <gabriel.fernandez@st.com> Tested-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-11-02PCI: designware: Use of_pci_get_host_bridge_resources() to parse DTZhou Wang3-60/+53
Use the new of_pci_get_host_bridge_resources() API in place of the PCI OF DT parser. [bhelgaas: changelog] Tested-by: James Morse <james.morse@arm.com> Tested-by: Gabriel Fernandez <gabriel.fernandez@st.com> Tested-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-11-02Revert "PCI: designware: Program ATU with untranslated address"Zhou Wang3-38/+16
Revert f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated address"). Note that dra7xx_pcie_host_init() now modifies pp->io_base, but we still need the original value for dw_pcie_setup() in the path below, so this adds a new io_base_tmp member. It will be removed later when dw_pcie_setup() is removed. dra7xx_add_pcie_port dw_pcie_host_init pp->io_base = range.cpu_addr pp->io_base_tmp = range.cpu_addr # <-- added pp->ops->host_init dra7xx_pcie_host_init # ops->host_init pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR # <-- modified pci_common_init_dev(..., &dw_pci) pcibios_init_hw hw->setup dw_pcie_setup # hw_pci.setup pci_ioremap_io(..., pp->io_base_tmp) # <-- original addr required [bhelgaas: changelog] Tested-by: James Morse <james.morse@arm.com> Tested-by: Gabriel Fernandez <gabriel.fernandez@st.com> Tested-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-11-02PCI: designware: Move calculation of bus addresses to DRA7xxGabriele Paoloni2-11/+11
Commit f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated address") added the calculation of PCI bus addresses in pcie-designware.c, storing them in new fields added in struct pcie_port. This calculation is done for every DesignWare user even though it only applies to DRA7xx. Move the calculation of the bus addresses to the DRA7xx driver to allow the rework of DesignWare to use the new DT parsing API. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-11-02PCI: designware: Make "num-lanes" an optional DT propertyGabriele Paoloni1-4/+6
Currently "num-lanes" is read in dw_pcie_host_init(), but it is only used if we call dw_pcie_setup_rc() while bringing up the link. If the link has already been brought up by firmware, we need not call dw_pcie_setup_rc(), and "num-lanes" is unnecessary. Only complain about "num-lanes" if we actually need it and we didn't find a valid value. [bhelgaas: changelog] Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: designware: Require config accesses to be naturally alignedGabriele Paoloni1-0/+8
Add sanity checks on "addr" input parameter in dw_pcie_cfg_read() and dw_pcie_cfg_write(). These checks make sure that accesses are aligned on their size, e.g., a 4-byte config access is aligned on a 4-byte boundary. [bhelgaas: changelog, set *val = 0 in failure case] Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-11-02PCI: designware: Simplify dw_pcie_cfg_read/write() interfacesGabriele Paoloni5-33/+26
Callers of dw_pcie_cfg_read() and dw_pcie_cfg_write() previously had to split the address into "addr" and "where". The callees assumed "addr" was 32-bit aligned (with zeros in the low two bits) and they used only the low two bits of "where". Accept the entire address in "addr" and drop the now-redundant "where" argument. As an example, this replaces this: int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val) *val = readb(addr + (where & 1)); with this: int dw_pcie_cfg_read(void __iomem *addr, int size, u32 *val) *val = readb(addr): [bhelgaas: changelog, split access size change to separate patch] Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: designware: Use exact access size in dw_pcie_cfg_read()Gabriele Paoloni1-6/+8
dw_pcie_cfg_write() uses the exact 8-, 16-, or 32-bit access size requested, but dw_pcie_cfg_read() previously performed a 32-bit read and masked out the bits requested. Use the exact access size in dw_pcie_cfg_read(). For example, if we want an 8-bit read, use readb() instead of using readl() and masking out the 8 bits we need. This makes it symmetric with dw_pcie_cfg_write(). [bhelgaas: split into separate patch, set *val = 0 in failure case] Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: spear: Fix dw_pcie_cfg_read/write() usageGabriele Paoloni1-12/+14
The first argument of dw_pcie_cfg_read/write() is a 32-bit aligned address. The second argument is the byte offset into a 32-bit word, and dw_pcie_cfg_read/write() only look at the low two bits. SPEAr13xx used dw_pcie_cfg_read() and dw_pcie_cfg_write() incorrectly: it passed important address bits in the second argument, where they were ignored. Pass the complete 32-bit word address in the first argument and only the 2-bit offset into that word in the second argument. Without this fix, SPEAr13xx host will never work with few buggy gen1 card which connects with only gen1 host and also with any endpoint which would generate a read request of more than 128 bytes. [bhelgaas: changelog] Reported-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.17+
2015-11-02PCI: designware: Set up high part of MSI target addressLucas Stach1-5/+12
Set up the high part of the MSI target address to allow the MSI target to be above 4GB on 64bit and PAE systems. [bhelgaas: changelog] Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-11-02Merge branch 'pm-sleep'Rafael J. Wysocki3-11/+67
* pm-sleep: PM / hibernate: fix a comment typo input: i8042: Avoid resetting controller on system suspend/resume PM / PCI / ACPI: Kick devices that might have been reset by firmware PM / sleep: Add flags to indicate platform firmware involvement PM / sleep: Drop pm_request_idle() from pm_generic_complete() PCI / PM: Avoid resuming more devices during system suspend PM / wakeup: wakeup_source_create: use kstrdup_const PM / sleep: Report interrupt that caused system wakeup
2015-10-30Merge tag 'pci-v4.3-fixes-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Sorry for this last-minute update; it's been in -next for quite a while, but I forgot about it until I started getting ready for the merge window. It's small and fixes a way a user could cause a panic via sysfs, so I think it's worth getting it in v4.3. NUMA: - Prevent out of bounds access in sysfs numa_node override (Sasha Levin)" * tag 'pci-v4.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Prevent out of bounds access in numa_node override
2015-10-30PCI: Fix sriov_enable() error path for pcibios_enable_sriov() failuresAlexander Duyck1-5/+6
Disable VFs if pcibios_enable_sriov() fails, just like we do for other errors in sriov_enable(). Call pcibios_sriov_disable() if virtfn_add() fails. [bhelgaas: changelog, split to separate patch for reviewability] Fixes: 995df527f399 ("PCI: Add pcibios_sriov_enable() and pcibios_sriov_disable()") Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Yang <weiyang@linux.vnet.ibm.com>
2015-10-30PCI: Wait 1 second between disabling VFs and clearing NumVFsAlexander Duyck1-1/+1
Per sec 3.3.3.1 of the SR-IOV spec, r1.1, we must allow 1.0s after clearing VF Enable before reading any field in the SR-IOV Extended Capability. Wait 1 second before calling pci_iov_set_numvfs(), which reads PCI_SRIOV_VF_OFFSET and PCI_SRIOV_VF_STRIDE after it sets PCI_SRIOV_NUM_VF. [bhelgaas: split to separate patch for reviewability, add spec reference] Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-30PCI: Reorder pcibios_sriov_disable()Alexander Duyck1-6/+6
Move pcibios_sriov_disable() up so it's defined before a future use. [bhelgaas: split to separate patch for reviewability] Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Yang <weiyang@linux.vnet.ibm.com>
2015-10-30PCI: Remove VFs in reverse order if virtfn_add() failsAlexander Duyck1-3/+3
If virtfn_add() fails, we call virtfn_remove() for any previously added devices. Remove the devices in reverse order (first-added is last-removed), which is more natural and doesn't require an additional variable. [bhelgaas: changelog, split to separate patch for reviewability] Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Yang <weiyang@linux.vnet.ibm.com>
2015-10-30PCI: rcar: Fix I/O offset for multiple host bridgesPhil Edworthy1-3/+6
Fix I/O offset for multiple host bridges. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-30PCI: rcar: Set root bus nr to that provided in DTPhil Edworthy1-1/+1
On ARM64, setting the root bus number to -1 causes probe failure. Moreover, we should use the bus number specified in the DT as we could have multiple PCIe controllers with different bus ranges. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-30PCI: rcar: Remove dependency on ARM-specific struct hw_pciPhil Edworthy1-28/+48
The R-Car PCIe host controller driver uses pci_common_init_dev(), which is ARM-specific and requires the ARM struct hw_pci. The part of pci_common_init_dev() that is needed is limited and can be done here without using hw_pci. Note that the ARM pcibios functions expect the PCI sysdata to be a pointer to a struct pci_sys_data. Add a struct pci_sys_data as the first element in struct gen_pci so that when we use a gen_pci pointer as sysdata, it is also a pointer to a struct pci_sys_data. Create and scan the root bus directly without using the ARM pci_common_init_dev() interface. Based on 499733e0cc1a ("PCI: generic: Remove dependency on ARM-specific struct hw_pci"). Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-30PCI: rcar: Make PCI aware of the I/O resourcesPhil Edworthy1-2/+3
Make PCI aware of the I/O resources. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-30PCI: rcar: Build pcie-rcar.c only on ARMGeert Uytterhoeven1-1/+2
The pcie-rcar.c driver (controlled by PCI_RCAR_GEN2_PCIE) uses struct pci_sys_data and pci_ioremap_io(), which only exist on ARM. Building it on other arches, e.g., arm64/shmobile, causes errors like this: drivers/pci/host/pcie-rcar.c:138:52: warning: 'struct pci_sys_data' declared inside parameter list drivers/pci/host/pcie-rcar.c:380:4: error: implicit declaration of function 'pci_ioremap_io' [-Werror=implicit-function-declaration] Build pcie-rcar.c only on ARM. [bhelgaas: changelog, split to separate pci-rcar-gen2 from pcie-rcar] Reported-by: Wolfram Sang <wsa@the-dreams.de> (pci_ioremap_io()) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-30PCI: rcar: Build pci-rcar-gen2.c only on ARMGeert Uytterhoeven1-1/+2
The pci-rcar-gen2.c driver (controlled by PCI_RCAR_GEN2) uses struct pci_sys_data, which only exists on ARM. Building it on other arches, e.g., arm64/shmobile, causes errors like this: drivers/pci/host/pci-rcar-gen2.c: In function 'rcar_pci_cfg_base': drivers/pci/host/pci-rcar-gen2.c:112:34: error: dereferencing pointer to incomplete type struct rcar_pci_priv *priv = sys->private_data; ^ Build pci-rcar-gen2.c only on ARM. [bhelgaas: changelog, split to separate pci-rcar-gen2 from pcie-rcar] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-29PCI: Expand Enhanced Allocation BAR outputBjorn Helgaas1-2/+14
An Enhanced Allocation Capability entry with BEI 0 fills in dev->resource[0] just like a real BAR 0 would, but non-EA experts might not connect "EA - BEI 0" with BAR 0. Decode the EA jargon a little bit, e.g., change this: pci 0002:01:00.0: EA - BEI 0, Prop 0x00: [mem 0x84300000-0x84303fff] to this: pci 0002:01:00.0: BAR 0: [mem 0x84300000-0x84303fff] (from Enhanced Allocation, properties 0x00) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-29PCI: Make Enhanced Allocation bitmasks more obviousBjorn Helgaas1-7/+8
Expand bitmask #defines completely. This puts the shift in the code instead of in the #define, but it makes it more obvious in the header file how fields in the register are laid out. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-29PCI: Handle Enhanced Allocation capability for SR-IOV devicesDavid Daney2-2/+15
SR-IOV BARs can be specified via EA entries. Extend the EA parser to extract the SRIOV BAR resources, and modify sriov_init() to use resources previously obtained via EA. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean O. Stalley <sean.stalley@intel.com>
2015-10-29PCI: Add support for Enhanced Allocation devicesSean O. Stalley3-0/+177
Add support for devices using Enhanced Allocation entries instead of BARs. This allows the kernel to parse the EA Extended Capability structure in PCI config space and claim the BAR-equivalent resources. See https://pcisig.com/sites/default/files/specification_documents/ECN_Enhanced_Allocation_23_Oct_2014_Final.pdf [bhelgaas: add spec URL, s/pci_ea_set_flags/pci_ea_flags/, consolidate declarations, print unknown property in hex to match spec] Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> [david.daney@cavium.com: Add more support/checking for Entry Properties, allow EA behind bridges, rewrite some error messages.] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-29PCI: Handle IORESOURCE_PCI_FIXED when assigning resourcesDavid Daney1-0/+43
The new Enhanced Allocation (EA) capability support (patches to follow) creates resources with the IORESOURCE_PCI_FIXED set. During resource assignment in pci_bus_assign_resources(), IORESOURCE_PCI_FIXED resources are not given a parent. This, in turn, causes pci_enable_resources() to fail with a "not claimed" error. So, in __pci_bus_assign_resources(), for IORESOURCE_PCI_FIXED resources, try to request the resource from a parent bus. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean O. Stalley <sean.stalley@intel.com>
2015-10-29PCI: Handle IORESOURCE_PCI_FIXED when sizing resourcesDavid Daney1-3/+4
The new Enhanced Allocation (EA) capability support (patches to follow) creates resources with the IORESOURCE_PCI_FIXED set. Since these resources cannot be relocated or resized, their alignment is not really defined, and it is therefore not specified. This causes a problem in pbus_size_mem() where resources with unspecified alignment are disabled. So, in pbus_size_mem() skip IORESOURCE_PCI_FIXED resources, instead of disabling them. [bhelgaas: folded in "flags & IORESOURCE_PCI_FIXED" fix from David] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean O. Stalley <sean.stalley@intel.com>