summaryrefslogtreecommitdiffstats
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2016-04-18Merge tag 'pci-v4.6-fixes-2' of ↵Linus Torvalds3-6/+57
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for two issues: - The VPD parsing code we added for v4.6 keeps some devices from crashing, but also keeps cxgb4 from reading non-standard extra VPD data that is relies on. Hariprasad added a way for the driver to specify how much VPD is valid. - The i.MX6 active-low reset GPIO support we added in v4.5 caused regressions on some boards, so we're reverting that. VPD: Add pci_set_vpd_size() (Hariprasad Shenai) cxgb4: Set VPD size so we can read both VPD structures (Hariprasad Shenai) Freescale i.MX6 host bridge driver: Revert "PCI: imx6: Add support for active-low reset GPIO" (Fabio Estevam)" * tag 'pci-v4.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: cxgb4: Set VPD size so we can read both VPD structures PCI: Add pci_set_vpd_size() to set VPD size Revert "PCI: imx6: Add support for active-low reset GPIO"
2016-04-15PCI: Add pci_set_vpd_size() to set VPD sizeHariprasad Shenai2-0/+43
After 104daa71b396 ("PCI: Determine actual VPD size on first access"), the PCI core computes the valid VPD size by parsing the VPD starting at offset 0x0. We don't attempt to read past that valid size because that causes some devices to crash. However, some devices do have data past that valid size. For example, Chelsio adapters contain two VPD structures, and the driver needs both of them. Add pci_set_vpd_size(). If a driver knows it is safe to read past the end of the VPD data structure at offset 0, it can use pci_set_vpd_size() to allow access to as much data as it needs. [bhelgaas: changelog, split patches, rename to pci_set_vpd_size() and return int (not ssize_t)] Fixes: 104daa71b396 ("PCI: Determine actual VPD size on first access") Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-04-14pci-sysfs: use proper file capability helper functionLinus Torvalds1-1/+1
The PCI config access checked the file capabilities correctly, but used the itnernal security capability check rather than the helper function that is actually meant for that. The security_capable() has unusual return values and is not meant to be used elsewhere (the only other use is in the capability checking functions that we actually intend people to use, and this odd PCI usage really stood out when looking around the capability code. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-05Revert "PCI: imx6: Add support for active-low reset GPIO"Fabio Estevam1-6/+14
Commit 5c5fb40de8f1 ("PCI: imx6: Add support for active-low reset GPIO") cause regressions on some boards like MX6 Gateworks Ventana, for example. The reason for the breakage is that this commit sets the GPIO polarity in the wrong logic level. Also, the commit log is wrong because active-low reset GPIO is what the driver used to support since the beginning. So keep the old behavior that ignores the GPIO polarity specified in the device tree and treat the PCI reset GPIO as active-low. Reported-by: Krzysztof Hałasa <khalasa@piap.pl> Tested-by: Tim Harvey <tharvey@gateworks.com> # Gateworks Ventana Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> CC: stable@vger.kernel.org # v4.5+
2016-03-22Revert "PCI: dra7xx: Mark driver as broken"Sekhar Nori1-1/+0
Revert 5c3b99d05752 ("PCI: dra7xx: Mark driver as broken"). 1c96bee4df19 ("ARM: DRA7: hwmod: Add custom reset handler for PCIeSS") added support to de-assert PCIe reset, so DRA7x PCIe is not broken anymore. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-21PCI: Restore inclusion of pci/hotplug KconfigTero Roponen1-0/+1
Commit e7e127e3c767 ("PCI: Include pci/hotplug Kconfig directly from pci/Kconfig") added one line to pci/Kconfig. However, for some mysterious reason it isn't there now, even though there are no traces of removing it in the git log. I detected this issue when 'make oldconfig' removed all the options that depended on HOTPLUG_PCI. [bhelgaas: I botched the cfeb8139a1fb ("Merge branch 'pci/host-hv' into next") merge. "git diff cfeb8139a1fb^ cfeb8139a1fb" shows a conflict in drivers/pci/Kconfig, and I mistakenly dropped the hotplug/Kconfig piece.] Signed-off-by: Tero Roponen <tero.roponen@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-19Merge tag 'powerpc-4.6-1' of ↵Linus Torvalds2-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This was delayed a day or two by some build-breakage on old toolchains which we've now fixed. There's two PCI commits both acked by Bjorn. There's one commit to mm/hugepage.c which is (co)authored by Kirill. Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/ relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup" * tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc: Fix unrecoverable SLB miss during restore_math() powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers powerpc/rcpm: Fix build break when SMP=n powerpc/book3e-64: Use hardcoded mttmr opcode powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible powerpc/T104xRDB: add tdm riser card node to device tree powerpc32: PAGE_EXEC required for inittext powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s) powerpc/86xx: Introduce and use common dtsi powerpc/86xx: Update device tree powerpc/86xx: Move dts files to fsl directory powerpc/86xx: Switch to kconfig fragments approach powerpc/86xx: Update defconfigs powerpc/86xx: Consolidate common platform code powerpc32: Remove one insn in mulhdu powerpc32: small optimisation in flush_icache_range() powerpc: Simplify test in __dma_sync() powerpc32: move xxxxx_dcache_range() functions inline powerpc32: Remove clear_pages() and define clear_page() inline ...
2016-03-16Merge tag 'pci-v4.6-changes' of ↵Linus Torvalds41-789/+5079
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for v4.6: Enumeration: - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management: - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Don't assign or reassign immutable resources (Bjorn Helgaas) - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization: - Wait for up to 1000ms after FLR reset (Alex Williamson) - Support SR-IOV on any function type (Kelly Zytaruk) - Add ACS quirk for all Cavium devices (Manish Jaggi) AER: - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) - Restore pci_ops pointer while calling original pci_ops (David Daney) - Fix aer_inject error codes (Jean Delvare) - Use dev_warn() in aer_inject (Jean Delvare) - Log actual error causes in aer_inject (Jean Delvare) - Log aer_inject error injections (Jean Delvare) VPD: - Prevent VPD access for buggy devices (Babu Moger) - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) - Update VPD definitions (Hannes Reinecke) - Allow access to VPD attributes with size 0 (Hannes Reinecke) - Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver: - Move structure definitions to separate header file (David Daney) - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) - Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver: - Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver: - Add PCIe host driver for ThunderX processors (David Daney) - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver: - Add DT bindings to configure PHY Tx driver settings (Justin Waters) - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) - Remove broken Gen2 workaround (Lucas Stach) - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver: - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver: - Attach VMD resources to parent domain's resource tree (Jon Derrick) - Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver: - Add fwnode_handle to x86 pci_sysdata (Jake Oshins) - Look up IRQ domain by fwnode_handle (Jake Oshins) - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver: - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) - Implement ->{add,remove}_bus() callbacks (Thierry Reding) - Remove unused struct tegra_pcie.num_ports field (Thierry Reding) - Track bus -> CPU mapping (Thierry Reding) - Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver: - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver: - ARC: Add PCI support (Joao Pinto) - Add generic dw_pcie_wait_for_link() (Joao Pinto) - Add default link up check if sub-driver doesn't override (Joao Pinto) - Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver: - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver: - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) - Update Zynq binding with Microblaze node (Bharat Kumar Gogada) - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver: - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous: - Check device_attach() return value always (Bjorn Helgaas) - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove includes of asm/pci-bridge.h (Bjorn Helgaas) - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) - Move pci_dma_* helpers to common code (Christoph Hellwig) - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)" * tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() ...
2016-03-16Merge branch 'for-linus' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - Add the CPU id for the new z13s machine - Add a s390 specific XOR template for RAID-5 checksumming based on the XC instruction. Remove all other alternatives, XC is always faster - The merge of our four different stack tracers into a single one - Tidy up the code related to page tables, several large inline functions are now out-of-line. Bloat-o-meter reports ~11K text size reduction - A binary interface for the priviledged CLP instruction to retrieve the hardware view of the installed PCI functions - Improvements for the dasd format code - Bug fixes and cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits) s390/pci: enforce fmb page boundary rule s390: fix floating pointer register corruption (again) s390/cpumf: add missing lpp magic initialization s390: Fix misspellings in comments s390/mm: split arch/s390/mm/pgtable.c s390/mm: uninline pmdp_xxx functions from pgtable.h s390/mm: uninline ptep_xxx functions from pgtable.h s390/pci: add ioctl interface for CLP s390: Use pr_warn instead of pr_warning s390/dasd: remove casts to dasd_*_private s390/dasd: Refactor dasd format functions s390/dasd: Simplify code in format logic s390/dasd: Improve dasd format code s390/percpu: remove this_cpu_cmpxchg_double_4 s390/cpumf: Improve guest detection heuristics s390/fault: merge report_user_fault implementations s390/dis: use correct escape sequence for '%' character s390/kvm: simplify set_guest_storage_key s390/oprofile: add z13/z13s model numbers s390: add z13s model number to z13 elf platform ...
2016-03-15Merge branch 'pci/resource' into nextBjorn Helgaas5-99/+77
* pci/resource: PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: Set ROM shadow location in arch code, not in PCI core PCI: Don't enable/disable ROM BAR if we're using a RAM shadow copy PCI: Don't assign or reassign immutable resources PCI: Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs PCI: Disable IO/MEM decoding for devices with non-compliant BARs
2016-03-15Merge branch 'pci/host-hv' into nextBjorn Helgaas4-1/+2369
* pci/host-hv: PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs PCI: Look up IRQ domain by fwnode_handle PCI: Add fwnode_handle to x86 pci_sysdata
2016-03-15Merge branch 'pci/host-designware' into nextBjorn Helgaas12-77/+203
* pci/host-designware: PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() ARC: Add PCI support
2016-03-15Merge branches 'pci/host-altera', 'pci/host-imx6', 'pci/host-keystone', ↵Bjorn Helgaas15-376/+2048
'pci/host-rcar', 'pci/host-tegra', 'pci/host-thunder', 'pci/host-vmd', 'pci/host-xilinx' and 'pci/host-xilinx-nwl' into next * pci/host-altera: PCI: altera: Fix altera_pcie_link_is_up() * pci/host-imx6: PCI: imx6: Add DT bindings to configure PHY Tx driver settings * pci/host-keystone: PCI: keystone: Defer probing if devm_phy_get() returns -EPROBE_DEFER * pci/host-rcar: PCI: rcar: Depend on ARCH_RENESAS, not ARCH_SHMOBILE * pci/host-tegra: PCI: tegra: Remove misleading PHYS_OFFSET PCI: tegra: Track bus -> CPU mapping PCI: tegra: Remove unused struct tegra_pcie.num_ports field PCI: tegra: Implement ->{add,remove}_bus() callbacks PCI: Add pci_ops.{add,remove}_bus() callbacks * pci/host-thunder: PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() PCI: generic: Move structure definitions to separate header file * pci/host-vmd: x86/PCI: VMD: Attach VMD resources to parent domain's resource tree x86/PCI: VMD: Set bus resource start to 0 x86/PCI: VMD: Document code for maintainability * pci/host-xilinx: microblaze/PCI: Support generic Xilinx AXI PCIe Host Bridge IP driver PCI: xilinx: Update Zynq binding with Microblaze node PCI: xilinx: Don't call pci_fixup_irqs() on Microblaze PCI: xilinx: Remove dependency on ARM-specific struct hw_pci PCI: xilinx: Use of_pci_get_host_bridge_resources() to parse DT * pci/host-xilinx-nwl: PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller
2016-03-15Merge branches 'pci/aer', 'pci/enumeration', 'pci/kconfig', 'pci/misc', ↵Bjorn Helgaas11-134/+261
'pci/virtualization' and 'pci/vpd' into next * pci/aer: PCI/AER: Log aer_inject error injections PCI/AER: Log actual error causes in aer_inject PCI/AER: Use dev_warn() in aer_inject PCI/AER: Fix aer_inject error codes * pci/enumeration: PCI: Fix broken URL for Dell biosdevname * pci/kconfig: PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Include pci/hotplug Kconfig directly from pci/Kconfig PCI: Include pci/pcie/Kconfig directly from pci/Kconfig * pci/misc: PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: Add QEMU top-level IDs for (sub)vendor & device unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h PCI: Move pci_dma_* helpers to common code frv/PCI: Remove stray pci_{alloc,free}_consistent() declaration * pci/virtualization: PCI: Wait for up to 1000ms after FLR reset PCI: Support SR-IOV on any function type * pci/vpd: PCI: Prevent VPD access for buggy devices PCI: Sleep rather than busy-wait for VPD access completion PCI: Fold struct pci_vpd_pci22 into struct pci_vpd PCI: Rename VPD symbols to remove unnecessary "pci22" PCI: Remove struct pci_vpd_ops.release function pointer PCI: Move pci_vpd_release() from header file to pci/access.c PCI: Move pci_read_vpd() and pci_write_vpd() close to other VPD code PCI: Determine actual VPD size on first access PCI: Use bitfield instead of bool for struct pci_vpd_pci22.busy PCI: Allow access to VPD attributes with size 0 PCI: Update VPD definitions
2016-03-15PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definitionHeikki Krogerus1-1/+1
PCI-SIG has defined Interface FEh for Base Class 0Ch, Sub-Class 03h as "USB Device (not host controller)". It is already being used in various USB device controller drivers for matching, so add PCI_CLASS_SERIAL_USB_DEVICE and use it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-15PCI: designware: Add driver for prototyping kits based on ARC SDPJoao Pinto3-0/+150
Add a reference platform driver for PCI RC IP Protoyping Kits based on the ARC SDP. [bhelgaas: changelog, split patch up, MAINTAINERS update] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2016-03-15PCI: designware: Add default link up check if sub-driver doesn't overrideJoao Pinto1-1/+9
Add a default DesignWare "link_up" test for use when a sub-driver doesn't supply its own pcie_host_ops.link_up() method. [bhelgaas: changelog, split into its own patch] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2016-03-15PCI: designware: Add generic dw_pcie_wait_for_link()Joao Pinto8-59/+39
Several DesignWare-based drivers (dra7xx, exynos, imx6, keystone, qcom, and spear13xx) had similar loops waiting for the link to come up. Add a generic dw_pcie_wait_for_link() for use by all these drivers so the waiting is done consistently, e.g., always using usleep_range() rather than mdelay() and using similar timeouts and retry counts. Note that this changes the Keystone link training/wait for link strategy, so we initiate link training, then wait longer for the link to come up before re-initiating link training. [bhelgaas: changelog, split into its own patch, update pci-keystone.c, pcie-qcom.c] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2016-03-15PCI: Cleanup pci/pcie/Kconfig whitespaceAndreas Ziegler1-3/+4
Clean up style issues in drivers/pci/pcie/Kconfig, in particular all indentation is now done using tabs, not spaces, and the definition of PCIEASPM_DEBUG is now separated from the definition of PCIEASPM with a newline. Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-12PCI: Simplify pci_create_attr() control flowBjorn Helgaas1-26/+27
Return error immediately to simplify the control flow in pci_create_attr(). No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-12PCI: Don't leak memory if sysfs_create_bin_file() failsBjorn Helgaas1-0/+2
If sysfs_create_bin_file() fails, pci_create_attr() leaks the struct bin_attribute it allocated previously. Free the struct bin_attribute if pci_create_attr() fails. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-12PCI: Simplify sysfs ROM cleanupBjorn Helgaas1-10/+3
The value of pdev->rom_attr is the definitive indicator of the fact that we're created a sysfs attribute. Check that rather than rom_size, which is only used incidentally when deciding whether to create a sysfs attribute. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-12PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPYBjorn Helgaas2-31/+1
The IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY bits are unused. Remove them and code that depends on them. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-12PCI: Clean up pci_map_rom() whitespaceBjorn Helgaas1-19/+18
Remove unnecessary indentation in pci_map_rom(). This is logically part of the previous patch; I split it out to make the critical changes in that patch more obvious. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-12PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfsBjorn Helgaas1-6/+2
When pci_create_sysfs_dev_files() created the "rom" sysfs file, it set the sysfs file size to the actual size of a ROM BAR, or if there was no ROM BAR but the platform provided a shadow copy in RAM, to 0x20000. 0x20000 is an arch-specific length that should not be baked into the PCI core. Every place that sets IORESOURCE_ROM_SHADOW also sets the size of the PCI_ROM_RESOURCE, so use the resource length always. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-11PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devicesDavid Daney3-0/+411
The cavium,pci-thunder-ecam devices are exactly ECAM-based PCI root complexes. These root complexes (loosely referred to as ECAM units in the hardware manuals) are used to access the Thunder on-chip devices. They are special in that all the BARs on devices behind these root complexes are at fixed addresses. Add a driver for these devices that synthesizes Enhanced Allocation (EA) capability entries for each BAR. Since this EA synthesis is needed for exactly two chip models, we can hard- code some assumptions about the device topology and the layout of the config space of specific DEVFNs in the driver. [bhelgaas: changelog, whitespace] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org>
2016-03-11PCI: thunder: Add PCIe host driver for ThunderX processorsDavid Daney3-0/+354
The root complexes used to access off-chip PCIe devices (called PEM units in the hardware manuals) on some Cavium ThunderX processors require quirky access methods for the config space of the PCIe bridge. Add a driver to provide these config space accessor functions. Use the pci-host-common code to configure the PCI machinery. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2016-03-11PCI: generic: Expose pci_host_common_probe() for use by other driversDavid Daney5-165/+202
Move pci_host_common_probe() and associated functions to pci-host-common.c, where it can be shared with other drivers. Make it public (not static) and update Kconfig and Makefile to build it. No functional change intended. [bhelgaas: split into separate patch, changelog] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will.deacon@arm.com>
2016-03-11PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()David Daney1-8/+17
Factor gen_pci_probe(), moving most of it into pci_host_common_probe() where it can be shared with other drivers that have slightly different config accessors. No functional change intended. [bhelgaas: split into separate patch, changelog] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will.deacon@arm.com>
2016-03-11PCI: generic: Move structure definitions to separate header fileDavid Daney2-18/+45
Move definitions for generic PCI host controller driver structures to a separate header file so we can share them with other drivers. No functional change intended. [bhelgaas: split into separate patch, changelog] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will.deacon@arm.com>
2016-03-11PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host ControllerBharat Kumar Gogada3-0/+892
Add PCIe Root Port driver for Xilinx PCIe NWL bridge IP. [bhelgaas: wait for link like dw_pcie_wait_for_link(), simplify bitmap error path, typos, whitespace, fold in Dan Carpenter's PTR_ERR() fix] Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2016-03-11PCI: keystone: Defer probing if devm_phy_get() returns -EPROBE_DEFERShawn Lin1-0/+3
A SerDes PHY is optional, so if devm_phy_get() doesn't find one at all, that's fine. But if devm_phy_get() finds a PHY that doesn't have a driver yet, it returns -EPROBE_DEFER. In that case, defer probing the Keystone driver. We may be able to load it later after a PHY driver is loaded. [bhelgaas: changelog, check for -EPROBE_DEFER first] Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-11PCI: altera: Fix altera_pcie_link_is_up()Ley Foon Tan1-1/+2
Originally altera_pcie_link_is_up() decided the link was up if any of the low four bits of the LTSSM register were set. But the link is only up if the LTSSM state is L0, so check for that exact value. [bhelgaas: changelog] Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-11PCI: rcar: Depend on ARCH_RENESAS, not ARCH_SHMOBILESimon Horman1-2/+2
Make the R-Car drivers depend on ARCH_RENESAS instead of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS. The motivation is that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM-based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-10PCI: Wait for up to 1000ms after FLR resetAlex Williamson1-2/+25
Some devices take longer than the spec indicates to return from FLR reset, a notable case of this is Intel integrated graphics (IGD), which can often take an additional 300ms powering down an attached LCD panel as part of the FLR. Allow devices up to 1000ms, testing every 100ms whether the second dword of config space is read as -1. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-10ARC: Add PCI supportJoao Pinto1-0/+1
Add PCI support to ARC and update drivers/pci Makefile enabling the ARC arch to use the generic PCI setup functions. [bhelgaas: fold in Joao's pci-dma-compat.h & pci-bridge.h build fix (I should have caught this myself, sorry] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-10PCI: Prevent VPD access for buggy devicesBabu Moger1-0/+29
On some devices, reading or writing VPD causes a system panic. This can be easily reproduced by running "lspci -vvv" or "cat /sys/bus/devices/XX../vpd". Blacklist these devices so we don't access VPD data at all. [bhelgaas: changelog, comment, drop pci/access.c changes] Link: https://bugzilla.kernel.org/show_bug.cgi?id=110681 Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Alexander Duyck <alexander.duyck@gmail.com>
2016-03-10PCI: Sleep rather than busy-wait for VPD access completionBjorn Helgaas1-8/+10
Use usleep_range() instead of udelay() while waiting for a VPD access to complete. This is not a performance path, so no need to hog the CPU. Rationale for usleep_range() parameters: We clear PCI_VPD_ADDR_F for a read (or set it for a write), then wait for the device to change it. For a device that updates PCI_VPD_ADDR between our config write and subsequent config read, we won't sleep at all and can get the device's maximum rate. Sleeping a minimum of 10 usec per 4-byte access limits throughput to about 400Kbytes/second. VPD is small (32K bytes at most), and most devices use only a fraction of that. We back off exponentially up to 1024 usec per iteration. If we reach 1024, we've already waited up to 1008 usec (16 + 32 + ... + 512), so if we miss an update and wait an extra 1024 usec, we can still get about 1/2 of the device's maximum rate. Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-03-09Merge tag 'pci-v4.5-fixes-5' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Here's another fix for v4.5. It fixes an ARM regression in v4.0 that causes many boxes to crash on boot, including cns3xxx, dove, footbridge, iopl13xx, ip32x, iop33x, ixp4xx, ks8695, mv78xx0, orion5x, pxa, sa1100, etc. The change is in code that's only built for ARM and ARM64. Summary: Enumeration: Allow generic PCI domains without bridge "parent" pointer (Krzysztof Hałasa)" * tag 'pci-v4.5-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
2016-03-09PCI: Add pcibios_bus_add_device() weak functionWei Yang1-0/+3
This adds weak function pcibios_bus_add_device() for arch dependent code could do proper setup. For example, powerpc could setup EEH related resources for SRIOV VFs. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09PCI/IOV: Rename and export virtfn_{add, remove}Wei Yang1-5/+5
During EEH recovery, hotplug is applied to the devices which don't have drivers or their drivers don't support EEH. However, the hotplug, which was implemented based on PCI bus, can't be applied to VF directly. Instead, we unplug and plug individual PCI devices (VFs). This renames virtn_{add,remove}() and exports them so they can be used in PCI hotplug during EEH recovery. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-08PCI/AER: Log aer_inject error injectionsJean Delvare1-0/+3
Log successful error injections so that injected errors can be differentiated from real errors. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Borislav Petkov <bp@suse.de>
2016-03-08PCI/AER: Log actual error causes in aer_injectJean Delvare1-1/+7
The aer_inject driver is very quiet. In most cases, it merely returns an error code to user-space, leaving the user with little clue about the actual reason for the failure. So, log error messages for 4 of the most frequent causes of failure: * Can't find the root port of the specified device. * Device doesn't support AER. * Root port doesn't support AER. * AER device not found. This gives the user a chance to understand why aer-inject failed. Based on a preliminary patch by Thomas Renninger. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Borislav Petkov <bp@suse.de> CC: Thomas Renninger <trenn@suse.de>
2016-03-08PCI/AER: Use dev_warn() in aer_injectJean Delvare1-3/+7
dev_warn() is better than printk(LOG_WARNING...) as it records which device the message relates to. Also add a prefix "aer_inject:" to help differentiate real errors from injected errors. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Borislav Petkov <bp@suse.de>
2016-03-08PCI/AER: Fix aer_inject error codesJean Delvare1-4/+4
EPERM means "Operation not permitted", which doesn't reflect the lack of support for AER. EPROTONOSUPPORT (Protocol not supported) is a better choice of error code if the device or its root port lack support for AER. Likewise, EINVAL means "Invalid argument", which is not suitable for cases where the AER error device is missing or unusable. ENODEV and EPROTONOSUPPORT, respectively, fit better. Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Borislav Petkov <bp@suse.de> CC: Prarit Bhargava <prarit@redhat.com>
2016-03-08PCI: tegra: Remove misleading PHYS_OFFSETThierry Reding1-1/+1
BARs are disabled when the size register is 0, so it's misleading to write a base address into the start register. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: tegra: Track bus -> CPU mappingThierry Reding1-0/+28
Track the offsets of the bus -> CPU mapping for I/O and memory. This is cosmetic for current Tegra chips because the offset is always 0. But to properly support legacy use-cases, like VGA, this would be needed so that PCI bus addresses can be relocated. While at it, also request the I/O resource both in physical memory and I/O space to make /proc/iomem consistent, as well as add the I/O region to the list of host bridge resources. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: tegra: Remove unused struct tegra_pcie.num_ports fieldThierry Reding1-1/+0
The num_ports field of the tegra_pcie structure is never used so remove it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: tegra: Implement ->{add,remove}_bus() callbacksThierry Reding1-20/+34
The configuration space mapping on Tegra is somewhat special, and in order to avoid wasting virtual address space the configuration space for each bus needs to be stitched together from several blocks which form a single continuous virtual address range for accessors. Currently the configuration space is mapped upon the first access to one of its registers. However, the mapping operation may sleep under certain circumstances, so doing it from the configuration space accessors (they are protected by a spin lock) will trigger a warning. To avoid the warning, use the ->add_bus() callback to perform the mapping at enumeration time when the operation is allowed to sleep. Also add an implementation of ->remove_bus() that undoes the mapping established by the ->add_bus() callback. While it isn't currently possible to unload the module, there is work underway to remedy this, and this code will come in handy when that happens. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: Add pci_ops.{add,remove}_bus() callbacksThierry Reding2-0/+10
Add pci_ops.{add,remove}_bus() callbacks, which will be called on every newly created bus and when a bus is being removed, respectively. This can be used by drivers to implement driver-specific initialization and teardown of the bus, in addition to the architecture-specifics implemented by the pcibios_add_bus() and the pcibios_remove_bus() functions. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 03:55:48 +0000