summaryrefslogtreecommitdiffstats
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2013-01-22Merge tag '3.8-pci-fixes-2' of ↵Linus Torvalds10-43/+40
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The most important is a fix for a pciehp deadlock that occurs when unplugging a Thunderbolt adapter. We also applied the same fix to shpchp, removed CONFIG_EXPERIMENTAL dependencies, fixed a pcie_aspm=force problem, and fixed a refcount leak. Details: - Hotplug PCI: pciehp: Use per-slot workqueues to avoid deadlock PCI: shpchp: Make shpchp_wq non-ordered PCI: shpchp: Handle push button event asynchronously PCI: shpchp: Use per-slot workqueues to avoid deadlock - Power management PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported - Misc PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put() PCI: remove depends on CONFIG_EXPERIMENTAL" * tag '3.8-pci-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: remove depends on CONFIG_EXPERIMENTAL PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported PCI: shpchp: Use per-slot workqueues to avoid deadlock PCI: shpchp: Handle push button event asynchronously PCI: shpchp: Make shpchp_wq non-ordered PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put() PCI: pciehp: Use per-slot workqueues to avoid deadlock
2013-01-17PCI: remove depends on CONFIG_EXPERIMENTALKees Cook1-1/+1
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-14PCI: Allow pcie_aspm=force even when FADT indicates it is unsupportedColin Ian King1-0/+3
Right now using pcie_aspm=force will not enable ASPM if the FADT indicates ASPM is unsupported. However, the semantics of force should probably allow for this, especially as they did before 3c076351c4 ("PCI: Rework ASPM disable code") This patch just skips the clearing of any ASPM setup that the firmware has carried out on this bus if pcie_aspm=force is being used. Reference: http://bugs.launchpad.net/bugs/962038 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org
2013-01-14Merge branch 'pci/yijing-hotplug-workqueues' into for-linusBjorn Helgaas7-42/+35
* pci/yijing-hotplug-workqueues: PCI: shpchp: Use per-slot workqueues to avoid deadlock PCI: shpchp: Handle push button event asynchronously PCI: shpchp: Make shpchp_wq non-ordered PCI: pciehp: Use per-slot workqueues to avoid deadlock
2013-01-14PCI: shpchp: Use per-slot workqueues to avoid deadlockBjorn Helgaas3-16/+18
When we have an SHPC-capable bridge with a second SHPC-capable bridge below it, pushing the upstream bridge's attention button causes a deadlock. The deadlock happens because we use the shpchp_wq workqueue to run shpchp_pushbutton_thread(), which uses shpchp_disable_slot() to remove devices below the upstream bridge. When we remove the downstream bridge, we call shpc_remove(), the shpchp driver's .remove() method. That calls flush_workqueue(shpchp_wq), which deadlocks because the shpchp_pushbutton_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every slot and removing the single shared workqueue. Here's the call path that leads to the deadlock: shpchp_queue_pushbutton_work queue_work(shpchp_wq) # shpchp_pushbutton_thread ... shpchp_pushbutton_thread shpchp_disable_slot remove_board shpchp_unconfigure_device pci_stop_and_remove_bus_device ... shpc_remove # shpchp driver .remove method hpc_release_ctlr cleanup_slots flush_workqueue(shpchp_wq) This change is based on code inspection, since we don't have hardware with this topology. Based-on-patch-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org
2013-01-14PCI: shpchp: Handle push button event asynchronouslyBjorn Helgaas3-12/+1
Use non-ordered workqueue for attention button events. Attention button events on each slot can be handled asynchronously. So we should use non-ordered workqueue. This patch also removes ordered workqueue in shpchp as a result. 486b10b9f4 ("PCI: pciehp: Handle push button event asynchronously") made the same change to pciehp. I split this out from a patch by Yijing Wang <wangyijing@huawei.com> so we fix one thing at a time and to make the shpchp history correspond more closely with the pciehp history. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
2013-01-13PCI: shpchp: Make shpchp_wq non-orderedBjorn Helgaas1-1/+1
e24dcbef93 ("shpchp: update workqueue usage") was described as adding non-ordered shpchp_wq, but it actually made it an *ordered* workqueue. This patch changes shpchp_wq to be non-ordered, as described in the e24dcbef93 commit log and as was done for pciehp by a827ea307b ("pciehp: update workqueue usage"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tejun Heo <tj@kernel.org>
2013-01-13PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put()Betty Dall1-0/+1
The function aer_recover_queue() calls pci_get_domain_bus_and_slot(), which requires that the caller decrement the reference count with pci_dev_put(). This patch adds the missing call to pci_dev_put(). Signed-off-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Shuah Khan <shuah.khan@hp.com> CC: stable@vger.kernel.org
2013-01-12PCI: pciehp: Use per-slot workqueues to avoid deadlockYijing Wang4-15/+17
When we have a hotplug-capable PCIe port with a second hotplug-capable PCIe port below it, removing the device below the upstream port causes a deadlock. The deadlock happens because we use the pciehp_wq workqueue to run pciehp_power_thread(), which uses pciehp_disable_slot() to remove devices below the upstream port. When we remove the downstream PCIe port, we call pciehp_remove(), the pciehp driver's .remove() method. That calls flush_workqueue(pciehp_wq), which deadlocks because the pciehp_power_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every PCIe port and removing the single shared workqueue. Here's the call path that leads to the deadlock: pciehp_queue_pushbutton_work queue_work(pciehp_wq) # queue pciehp_power_thread ... pciehp_power_thread pciehp_disable_slot remove_board pciehp_unconfigure_device pci_stop_and_remove_bus_device ... pciehp_remove # pciehp driver .remove method pciehp_release_ctrl pcie_cleanup_slot flush_workqueue(pciehp_wq) This is fairly urgent because it can be caused by simply unplugging a Thunderbolt adapter, as reported by Daniel below. [bhelgaas: changelog] Reference: http://lkml.kernel.org/r/CAMVG2ssiRgcTD1bej2tkUUfsWmpL5eNtPcNif9va2-Gzb2u8nQ@mail.gmail.com Reported-and-tested-by: Daniel J Blueman <daniel@quora.org> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org
2013-01-10pci: fix iov.c kernel-doc warningsRandy Dunlap1-1/+1
Fix kernel-doc warning in iov.c: Warning(drivers/pci/iov.c:752): No description found for parameter 'numvfs' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Sorry-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-26PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHzAndy Lutomirski1-2/+5
Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Chris Ball <cjb@laptop.org> CC: Manoj Iyer <manoj.iyer@canonical.com> CC: stable@vger.kernel.org
2012-12-26PCI/PM: Do not suspend port if any subordinate device needs PME pollingHuang Ying1-1/+19
Ulrich reported that his USB3 cardreader does not work reliably when connected to the USB3 port. It turns out that USB3 controller failed to awaken when plugging in the USB3 cardreader. Further experiments found that the USB3 host controller can only be awakened via polling, not via PME interrupt. But if the PCIe port to which the USB3 host controller is connected is suspended, we cannot poll the controller because its config space is not accessible when the PCIe port is in a low power state. To solve the issue, the PCIe port will not be suspended if any subordinate device needs PME polling. [bhelgaas: use bool consistently rather than mixing int/bool] Reference: http://lkml.kernel.org/r/50841CCC.9030809@uli-eckhardt.de Reported-by: Ulrich Eckhardt <usb@uli-eckhardt.de> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+
2012-12-26PCI: Remove spurious error for sriov_numvfs store and simplify flowBjorn Helgaas1-51/+34
If we request "num_vfs" and the driver's sriov_configure() method enables exactly that number ("num_vfs_enabled"), we complain "Invalid value for number of VFs to enable" and return an error. We should silently return success instead. Also, use kstrtou16() since numVFs is defined to be a 16-bit field and rework to simplify control flow. Reported-by: Greg Rose <gregory.v.rose@intel.com> Reference: http://lkml.kernel.org/r/20121214101911.00002f59@unknown Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Donald Dutile <ddutile@redhat.com>
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds4-0/+270
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "Add support to generate code for the latest machine zEC12, MOD and XOR instruction support for the BPF jit compiler, the dasd safe offline feature and the big one: the s390 architecture gets PCI support!! Right before the world ends on the 21st ;-)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits) s390/qdio: rename the misleading PCI flag of qdio devices s390/pci: remove obsolete email addresses s390/pci: speed up __iowrite64_copy by using pci store block insn s390/pci: enable NEED_DMA_MAP_STATE s390/pci: no msleep in potential IRQ context s390/pci: fix potential NULL pointer dereference in dma_free_seg_table() s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memset s390/bpf,jit: add support for XOR instruction s390/bpf,jit: add support MOD instruction s390/cio: fix pgid reserved check vga: compile fix, disable vga for s390 s390/pci: add PCI Kconfig options s390/pci: s390 specific PCI sysfs attributes s390/pci: PCI hotplug support via SCLP s390/pci: CHSC PCI support for error and availability events s390/pci: DMA support s390/pci: PCI adapter interrupts for MSI/MSI-X s390/bitops: find leftmost bit instruction support s390/pci: CLP interface s390/pci: base support ...
2012-12-13Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds19-131/+479
Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
2012-12-11Merge tag 'driver-core-3.8-rc1' of ↵Linus Torvalds13-159/+121
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...
2012-12-10Merge branch 'pci/mjg-pci-roms-from-efi' into nextBjorn Helgaas1-1/+1
* pci/mjg-pci-roms-from-efi: PCI: Use phys_addr_t for physical ROM address
2012-12-10PCI: Use phys_addr_t for physical ROM addressBjorn Helgaas1-1/+1
Use phys_addr_t rather than "void *" for physical memory address. This removes casts and fixes a "cast from pointer to integer of different size" warning on ppc44x_defconfig. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-12-07Merge branch 'pci/bjorn-pcie-cap' into nextBjorn Helgaas3-15/+18
* pci/bjorn-pcie-cap: ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names PCI: Add and use standard PCI-X Capability register names
2012-12-07PCI: Add standard PCIe Capability Link ASPM field namesBjorn Helgaas1-5/+6
Add standard #defines for ASPM fields in PCI Express Link Capability and Link Control registers. Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but these are defined for the Linux ASPM interfaces, e.g., pci_disable_link_state(), and only coincidentally match the actual register bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match the register bit. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
2012-12-07PCI/portdrv: Use PCI Express Capability accessorsBjorn Helgaas1-2/+1
Use PCI Express Capability access functions to simplify portdrv. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-12-07PCI: Use standard PCIe Capability Link register field namesBjorn Helgaas1-2/+2
Use the standard #defines for PCIe Link Status and Capability registers rather than bare numbers. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-12-06Merge branch 'pci/mjg-pci-roms-from-efi' into nextBjorn Helgaas3-2/+27
* pci/mjg-pci-roms-from-efi: x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR
2012-12-05PCI: Add support for non-BAR ROMsMatthew Garrett1-2/+9
Platforms may provide their own mechanisms for obtaining ROMs. Add support for using data provided by the platform in that case. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Seth Forshee <seth.forshee@canonical.com>
2012-12-05PCI: Add pcibios_add_deviceMatthew Garrett2-0/+18
Platforms may want to provide architecture-specific functionality during PCI enumeration. Add a pcibios_add_device() call that architectures can override to do so. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Seth Forshee <seth.forshee@canonical.com>
2012-12-05PCI: Add and use standard PCI-X Capability register namesBjorn Helgaas1-6/+9
Add and use #defines for PCI-X Capability registers and fields. Note that the PCI-X Capability has a different layout for type 0 (endpoint) and type 1 (bridge) devices. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-12-04Merge branch 'pci/huang-d3cold-fixes' into nextBjorn Helgaas2-27/+42
* pci/huang-d3cold-fixes: PCI/PM: Keep runtime PM enabled for unbound PCI devices
2012-12-04PCI/PM: Keep runtime PM enabled for unbound PCI devicesHuang Ying2-27/+42
For unbound PCI devices, what we need is: - Always in D0 state, because some devices do not work again after being put into D3 by the PCI bus. - In SUSPENDED state if allowed, so that the parent devices can still be put into low power state. To satisfy these requirements, the runtime PM for the unbound PCI devices are disabled and set to SUSPENDED state. One issue of this solution is that the PCI devices will be put into SUSPENDED state even if the SUSPENDED state is forbidden via the sysfs interface (.../power/control) of the device. This is not an issue for most devices, because most PCI devices are not used at all if unbound. But there are exceptions. For example, unbound VGA card can be used for display, but suspending its parents makes it stop working. To fix the issue, we keep the runtime PM enabled when the PCI devices are unbound. But the runtime PM callbacks will do nothing if the PCI devices are unbound. This way, we can put the PCI devices into SUSPENDED state without putting the PCI devices into D3 state. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48201 Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+
2012-11-30Merge branch 'pci/misc' into nextBjorn Helgaas1-1/+4
* pci/misc: xen-pcifront: Handle backend CLOSED without CLOSING
2012-11-30xen-pcifront: Handle backend CLOSED without CLOSINGDavid Vrabel1-1/+4
Backend drivers shouldn't transition to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-30s390/pci: PCI hotplug support via SCLPJan Glauber3-0/+264
Add SCLP PCI configure/deconfigure and implement a PCI hotplug controller (s390_pci_hpc). The hotplug controller creates a slot for every PCI function in stand-by or configured state. The PCI functions are named after the PCI function ID (fid). By writing to the power attribute in /sys/bus/pci/slots/<fid>/power the PCI function is moved to stand-by or configured state. If moved to the configured state the device is automatically scanned by the s390 PCI layer. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-30s390/pci: PCI adapter interrupts for MSI/MSI-XJan Glauber1-0/+6
Support PCI adapter interrupts using the Single-IRQ-mode. Single-IRQ-mode disables an adapter IRQ automatically after delivering it until the SIC instruction enables it again. This is used to reduce the number of IRQs for streaming workloads. Up to 64 MSI handlers can be registered per PCI function. A hash table is used to map interrupt numbers to MSI descriptors. The interrupt vector is scanned using the flogr instruction. Only MSI/MSI-X interrupts are supported, no legacy INTs. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-28PCI: Remove __dev* markingsBill Pemberton8-90/+90
CONFIG_HOTPLUG is going away as an option so __devexit_p, __devint, __devinitdata, __devinitconst, and _devexit are no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28PCI: Always build setup-bus when PCI is enabledBill Pemberton1-4/+1
CONFIG_HOTPLUG is being removed so setup-bus always needs to be built as part of PCI. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28PCI: Move pci_uevent into pci-driver.cBill Pemberton4-40/+33
With the demise of CONFIG_HOTPLUG as an option, the pci_uevent function located in hotplug.c will now always be used and doesn't need special treatment in the Makefile. Move pci_uevent into pci-driver.c and remove hotplug.c Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28PCI: Remove CONFIG_HOTPLUG ifdefsBill Pemberton4-28/+0
Remove conditional code based on CONFIG_HOTPLUG being false. It's always on now in preparation of it going away as an option. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28Merge branch 'pci/misc' into nextBjorn Helgaas2-5/+22
* pci/misc: PCI/AER: Report success only when every device has AER-aware driver Conflicts: drivers/pci/pcie/aer/aerdrv_core.c
2012-11-26PCI/AER: Report success only when every device has AER-aware driverVijay Mohan Pandarathil2-4/+22
When an error is detected on a PCIe device which does not have an AER-aware driver, prevent AER infrastructure from reporting successful error recovery. This is because the report_error_detected() function that gets called in the first phase of recovery process allows forward progress even when the driver for the device does not have AER capabilities. It seems that all callbacks (in pci_error_handlers structure) registered by drivers that gets called during error recovery are not mandatory. So the intention of the infrastructure design seems to be to allow forward progress even when a specific callback has not been registered by a driver. However, if error handler structure itself has not been registered, it doesn't make sense to allow forward progress. As a result of the current design, in the case of a single device having an AER-unaware driver or in the case of any function in a multi-function card having an AER-unaware driver, a successful recovery is reported. Typical scenario this happens is when a PCI device is detached from a KVM host and the pci-stub driver on the host claims the device. The pci-stub driver does not have error handling capabilities but the AER infrastructure still reports that the device recovered successfully. The changes proposed here leaves the device(s)in an unrecovered state if the driver for the device or for any device in the subtree does not have error handler structure registered. This reflects the true state of the device and prevents any partial recovery (or no recovery at all) reported as successful. [bhelgaas: changelog] Signed-off-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linas Vepstas <linasvepstas@gmail.com> Reviewed-by: Myron Stowe <myron.stowe@redhat.com>
2012-11-26Merge branch 'for-linus' into nextBjorn Helgaas8-52/+62
* for-linus: PCI/portdrv: Don't create hotplug slots unless port supports hotplug PCI/PM: Fix proc config reg access for D3cold and bridge suspending PCI/PM: Resume device before shutdown PCI/PM: Fix deadlock when unbinding device if parent in D3cold
2012-11-15ACPI / PM: Move routines for adding/removing device wakeup notifiersRafael J. Wysocki1-67/+4
ACPI routines for adding and removing device wakeup notifiers are currently defined in a PCI-specific file, but they will be necessary for non-PCI devices too, so move them to a separate file under drivers/acpi and rename them to indicate their ACPI origins. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15Merge branch 'pm-qos' into acpi-dev-pmRafael J. Wysocki1-1/+7
Material in the 'acpi-dev-pm' branch depends on 'pm-qos' commits.
2012-11-13Merge branch 'pci/misc' into nextBjorn Helgaas1-0/+2
* pci/misc: PCI/ACPI: Notify PCI devices when their power resource is turned on PCI: Add GPL license for drivers/pci/ioapic module PCI: Fix bit definitions of PCI_EXP_LNKCAP2 register
2012-11-13Merge branch 'pci/don-sriov' into nextBjorn Helgaas4-34/+234
* pci/don-sriov: PCI: Remove useless "!dev" tests PCI: Use spec names for SR-IOV capability fields PCI: Provide method to reduce the number of total VFs supported PCI: SRIOV control and status via sysfs PCI: Use is_visible() with boot_vga attribute for pci_dev PCI: Add pci_device_type to pdev's device struct
2012-11-13PCI: Add GPL license for drivers/pci/ioapic moduleAndrew Cooks1-0/+2
Config PCI_IOAPIC turned into a tristate in commit b95a7bd70046, but no module license is specified. This adds the missing module license. Signed-off-by: Andrew Cooks <acooks@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jan Beulich <jbeulich@suse.com>
2012-11-09PCI: Remove useless "!dev" testsBjorn Helgaas1-7/+7
No need to check "!dev" when the caller should always supply a valid pointer. If the caller *doesn't* supply a valid pointer, it probably won't check for a failure return either. This way we'll oops and get a backtrace. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-09PCI: Use spec names for SR-IOV capability fieldsBjorn Helgaas3-33/+33
Use the same names (almost) as the spec for TotalVFs, InitialVFs, NumVFs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-09PCI: Provide method to reduce the number of total VFs supportedDonald Dutile3-2/+50
Some implementations of SRIOV provide a capability structure value of TotalVFs that is greater than what the software can support. Provide a method to reduce the capability structure reported value to the value the driver can support. This ensures sysfs reports the current capability of the system, hardware and software. Example for its use: igb & ixgbe -- report 8 & 64 as TotalVFs, but drivers only support 7 & 63 maximum. Signed-off-by: Donald Dutile <ddutile@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-09PCI: SRIOV control and status via sysfsDonald Dutile1-0/+127
Provide files under sysfs to determine the maximum number of VFs an SR-IOV-capable PCIe device supports, and methods to enable and disable the VFs on a per-device basis. Currently, VF enablement by SR-IOV-capable PCIe devices is done via driver-specific module parameters. If not setup in modprobe files, it requires admin to unload & reload PF drivers with number of desired VFs to enable. Additionally, the enablement is system wide: all devices controlled by the same driver have the same number of VFs enabled. Although the latter is probably desired, there are PCI configurations setup by system BIOS that may not enable that to occur. Two files are created for the PF of PCIe devices with SR-IOV support: sriov_totalvfs Contains the maximum number of VFs the device could support as reported by the TotalVFs register in the SR-IOV extended capability. sriov_numvfs Contains the number of VFs currently enabled on this device as reported by the NumVFs register in the SR-IOV extended capability. Writing zero to this file disables all VFs. Writing a positive number to this file enables that number of VFs. These files are readable for all SR-IOV PF devices. Writes to the sriov_numvfs file are effective only if a driver that supports the sriov_configure() method is attached. Signed-off-by: Donald Dutile <ddutile@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-09PCI: Use is_visible() with boot_vga attribute for pci_devYinghai Lu1-11/+10
Should make pci_create_sysfs_dev_files() simpler. Also fix possible memleak in remove path. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-09PCI: Add pci_device_type to pdev's device structYinghai Lu3-0/+26
Need type filled in device structure so it can be used for visible attribute control in sysfs for pci_dev. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 19:23:38 +0000