summaryrefslogtreecommitdiffstats
path: root/drivers/pci/setup-res.c
AgeCommit message (Collapse)AuthorFilesLines
2022-09-21PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridgeMaciej W. Rozycki1-0/+11
When pci_assign_resource() is unable to assign resources to a BAR, it uses pci_revert_fw_address() to fall back to a firmware assignment (if any). Previously pci_revert_fw_address() assumed all addresses could reach the device, but this is not true if the device is below a bridge that only forwards addresses within its windows. This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS did not assign valid addresses to several bridges and USB devices: pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff] pci 0000:01:00.0: bridge window [io 0x0000-0x0fff] # unreachable pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff] pci 0000:02:02.0: bridge window [io 0x0000-0x0fff] # unreachable pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff] pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] # unreachable pci 0000:06:08.0: USB UHCI 1.1 pci 0000:06:08.0: BAR 4: [io 0xfce0-0xfcff] # unreachable pci 0000:06:08.1: USB UHCI 1.1 pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] # unreachable pci 0000:06:08.0: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window pci 0000:06:08.1: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window During the first pass of assigning unassigned resources, there was not enough I/O space available, so we couldn't assign the 06:08.0 BAR and reverted to the firmware assignment (still unreachable). Reverting the 06:08.1 assignment failed because it conflicted with 06:08.0: pci 0000:00:11.0: bridge window [io 0xe000-0xefff] pci 0000:01:00.0: no space for bridge window [io size 0x2000] pci 0000:02:02.0: no space for bridge window [io size 0x1000] pci 0000:05:00.0: no space for bridge window [io size 0x1000] pci 0000:06:08.0: BAR 4: no space for [io size 0x0020] pci 0000:06:08.0: BAR 4: trying firmware assignment [io 0xfce0-0xfcff] pci 0000:06:08.1: BAR 4: no space for [io size 0x0020] pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff] pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff] A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR, but left the 06:08.0 BAR alone, so the UHCI device was still unusable: pci 0000:00:11.0: bridge window [io 0xe000-0xefff] released pci 0000:00:11.0: bridge window [io 0x1000-0x2fff] # reassigned pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] # reassigned pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] # reassigned pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] # reassigned pci 0000:06:08.0: BAR 4: assigned [io 0xfce0-0xfcff] # left alone pci 0000:06:08.1: BAR 4: assigned [io 0x2000-0x201f] ... uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host controller halted, very bad! uhci_hcd 0000:06:08.0: HCRESET not completed yet! uhci_hcd 0000:06:08.0: HC died; cleaning up If the address assigned by firmware is not reachable because it's not within upstream bridge windows, fail instead of assigning the unusable address from firmware. [bhelgaas: commit log, use pci_upstream_bridge()] Link: https://bugzilla.kernel.org/show_bug.cgi?id=16263 Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203012338460.46819@angie.orcam.me.uk Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209211921250.29493@angie.orcam.me.uk Fixes: 58c84eda0756 ("PCI: fall back to original BIOS BAR addresses") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v2.6.35+
2022-01-11PCI: Work around Intel I210 ROM BAR overlap defectBjorn Helgaas1-2/+6
Per PCIe r5, sec 7.5.1.2.4, a device must not claim accesses to its Expansion ROM unless both the Memory Space Enable and the Expansion ROM Enable bit are set. But apparently some Intel I210 NICs don't work correctly if the ROM BAR overlaps another BAR, even if the Expansion ROM is disabled. Michael reported that on a Kontron SMARC-sAL28 ARM64 system with U-Boot v2021.01-rc3, the ROM BAR overlaps BAR 3, and networking doesn't work at all: BAR 0: 0x40000000 (32-bit, non-prefetchable) [size=1M] BAR 3: 0x40200000 (32-bit, non-prefetchable) [size=16K] ROM: 0x40200000 (disabled) [size=1M] NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) igb 0002:01:00.0 enP2p1s0: Reset adapter Previously, pci_std_update_resource() wrote the assigned ROM address to the BAR only when the ROM was enabled. This meant that the I210 ROM BAR could be left with an address assigned by firmware, which might overlap with other BARs. Quirk these I210 devices so pci_std_update_resource() always writes the assigned address to the ROM BAR, whether or not the ROM is enabled. Link: https://lore.kernel.org/r/20211223163754.GA1267351@bhelgaas Link: https://lore.kernel.org/r/20201230185317.30915-1-michael@walle.cc Link: https://bugzilla.kernel.org/show_bug.cgi?id=211105 Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-01-12PCI: Decline to resize resources if boot config must be preservedArd Biesheuvel1-0/+6
The _DSM #5 method in the ACPI host bridge object tells us whether the OS must preserve the resource assignments done by firmware. If this is the case, we should not permit drivers to resize BARs on the fly. Make pci_resize_resource() take this into account. Link: https://lore.kernel.org/r/20210109095353.13417-1-ardb@kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.4+
2020-06-30PCI: Replace lkml.org, spinics, gmane with lore.kernel.orgBjorn Helgaas1-1/+2
The lkml.org, spinics.net, and gmane.org archives are not very reliable and, in some cases, not even easily accessible. Replace links to them with links to lore.kernel.org, the archives hosted by kernel.org. I found the gmane items via the Wayback Machine archive at https://web.archive.org/. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-05-01PCI: Allow pci_resize_resource() for devices on root busArd Biesheuvel1-4/+5
When resizing a BAR, pci_reassign_bridge_resources() is invoked to bring the bridge windows of parent bridges in line with the new BAR assignment. This assumes the device whose BAR is being resized lives on a subordinate bus, but this is not necessarily the case. A device may live on the root bus, in which case dev->bus->self is NULL, and passing a NULL pci_dev pointer to pci_reassign_bridge_resources() will cause it to crash. So let's make the call to pci_reassign_bridge_resources() conditional on whether dev->bus->self is non-NULL in the first place. Fixes: 8bb705e3e79d84e7 ("PCI: Add pci_resize_resource() for resizing BARs") Link: https://lore.kernel.org/r/20200421162256.26887-1-ardb@kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2018-04-11PCI: Remove messages about reassigning resourcesDesnes A. Nunes do Rosario1-2/+0
When reassigning device resources to increase their alignment, e.g., because of a "pci=resource_alignment=" kernel parameter or because the platform aligns resources to its page size, we previously emitted messages like this: pci 0000:00:00.0: Disabling memory decoding and releasing memory resources pci 0000:00:00.0: disabling bridge mem windows These messages don't convey any useful information, so remove them. Fixes: 38274637699 ("powerpc/powernv: Override pcibios_default_alignment() to force PCI devices to be page aligned") Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.vnet.ibm.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-04-06Merge tag 'pci-v4.17-changes' of ↵Linus Torvalds1-7/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...
2018-03-19PCI: Tidy commentsBjorn Helgaas1-7/+3
Remove pointless comments that tell us the file name, remove blank line comments, follow multi-line comment conventions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-02-26PCI: Allow release of resources that were never assignedChristian König1-0/+4
It is entirely possible that the BIOS wasn't able to assign resources to a device. In this case don't crash in pci_release_resource() when we try to resize the resource. Fixes: 8bb705e3e79d ("PCI: Add pci_resize_resource() for resizing BARs") Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> CC: stable@vger.kernel.org # v4.15+
2018-01-18PCI: Add wrappers for dev_printk()Frederick Lawler1-21/+19
Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: squash into one patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds1-0/+58
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-25PCI: Add pci_resize_resource() for resizing BARsChristian König1-0/+58
Add a pci_resize_resource() interface to allow device drivers to resize BARs of their devices. This is useful for devices with large local storage, e.g., graphics devices. These devices often only expose 256MB BARs initially to be compatible with 32-bit systems. This function only tries to reprogram the windows of the bridge directly above the requesting device and only the BAR of the same type (usually mem, 64bit, prefetchable). This is done to avoid disturbing other drivers by changing the BARs of their devices. Drivers should use the following sequence to resize their BARs: 1. Disable memory decoding of the device using the PCI cfg dword. 2. Use pci_release_resource() to release all BARs which can move during the resize, including the one you want to resize. 3. Call pci_resize_resource() for each BAR you want to resize. 4. Call pci_assign_unassigned_bus_resources() to reassign new locations for all BARs which are not resized, but could move. 5. If everything worked as expected, enable memory decoding in the device again using the PCI cfg dword. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-02PCI: Add a generic weak pcibios_align_resource()Palmer Dabbelt1-0/+13
Multiple architectures define this as a trivial function, and I'm adding another one as part of the RISC-V port. Add a __weak version of pcibios_align_resource() and delete the now-obselete ones in a handful of ports. The only functional change should be that a handful of ports used to export pcibios_fixup_bus(). Only some architectures export this, so I just dropped it. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-18PCI: Make PCI_ROM_ADDRESS_MASK a 32-bit constantMatthias Kaehlcke1-1/+1
A 64-bit value is not needed since a PCI ROM address consists in 32 bits. This fixes a clang warning about "implicit conversion from 'unsigned long' to 'u32'". Also remove now unnecessary casts to u32 from __pci_read_base() and pci_std_update_resource(). Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12Merge branch 'pci/host-rockchip' into nextBjorn Helgaas1-0/+8
* pci/host-rockchip: PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init() PCI: rockchip: Split out rockchip_cfg_atu() PCI: rockchip: Clean up bit definitions for PCIE_RC_CONFIG_LCS PCI: rockchip: Correct the use of FTS mask PCI: rockchip: Remove the pointer to L1 substate cap PCI: rockchip: Specify the link capability PCI: rockchip: Fix negotiated lanes calculation PCI: rockchip: Add Kconfig COMPILE_TEST PCI: rockchip: Mark RC as common clock architecture PCI: rockchip: Provide captured slot power limit and scale PCI: rockchip: Add three new resets as required properties PCI: Don't attempt to claim shadow copies of ROM PCI: designware: Check for iATU unroll support after initializing host PCI: qcom: Fix pp->dev usage before assignment PCI: designware-plat: Update author email address PCI: layerscape: Fix drvdata usage before assignment PCI: designware-plat: Change maintainer to Jose Abreu
2016-11-29PCI: Add comments about ROM BAR updatingBjorn Helgaas1-0/+6
pci_update_resource() updates a hardware BAR so its address matches the kernel's struct resource UNLESS it's a disabled ROM BAR. We only update those when we enable the ROM. It's not obvious from the code why ROM BARs should be handled specially. Apparently there are Matrox devices with defective ROM BARs that read as zero when disabled. That means that if pci_enable_rom() reads the disabled BAR, sets PCI_ROM_ADDRESS_ENABLE (without re-inserting the address), and writes it back, it would enable the ROM at address zero. Add comments and references to explain why we can't make the code look more rational. The code changes are from 755528c860b0 ("Ignore disabled ROM resources at setup") and 8085ce084c0f ("[PATCH] Fix PCI ROM mapping"). Link: https://lkml.org/lkml/2005/8/30/138 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-29PCI: Remove pci_resource_bar() and pci_iov_resource_bar()Bjorn Helgaas1-6/+7
pci_std_update_resource() only deals with standard BARs, so we don't have to worry about the complications of VF BARs in an SR-IOV capability. Compute the BAR address inline and remove pci_resource_bar(). That makes pci_iov_resource_bar() unused, so remove that as well. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-29PCI: Separate VF BAR updates from standard BAR updatesBjorn Helgaas1-2/+11
Previously pci_update_resource() used the same code path for updating standard BARs and VF BARs in SR-IOV capabilities. Split the VF BAR update into a new pci_iov_update_resource() internal interface, which makes it simpler to compute the BAR address (we can get rid of pci_resource_bar() and pci_iov_resource_bar()). This patch: - Renames pci_update_resource() to pci_std_update_resource(), - Adds pci_iov_update_resource(), - Makes pci_update_resource() a wrapper that calls the appropriate one, No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-29PCI: Update BARs using property bits appropriate for typeBjorn Helgaas1-3/+8
The BAR property bits (0-3 for memory BARs, 0-1 for I/O BARs) are supposed to be read-only, but we do save them in res->flags and include them when updating the BAR. Mask the I/O property bits with ~PCI_BASE_ADDRESS_IO_MASK (0x3) instead of PCI_REGION_FLAG_MASK (0xf) to make it obvious that we can't corrupt bits 2-3 of I/O addresses. Use PCI_ROM_ADDRESS_MASK for ROM BARs. This means we'll only check the top 21 bits (instead of the 28 bits we used to check) of a ROM BAR to see if the update was successful. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-28PCI: Ignore BAR updates on virtual functionsBjorn Helgaas1-3/+2
VF BARs are read-only zero, so updating VF BARs will not have any effect. See the SR-IOV spec r1.1, sec 3.4.1.11. We already ignore these updates because of 70675e0b6a1a ("PCI: Don't try to restore VF BARs"); this merely restructures it slightly to make it easier to split updates for standard and SR-IOV BARs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-08PCI: Don't attempt to claim shadow copies of ROMBjorn Helgaas1-0/+8
If we're using a shadow copy of a PCI device ROM, the shadow copy is in RAM and the device never sees accesses to it and doesn't respond to it. We don't have to route the shadow range to the PCI device, and the device doesn't have to claim the range. Previously we treated the shadow copy as though it were the ROM BAR, and we failed to claim it because the region wasn't routed to the device: pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci_bus 0000:01: Allocating resources pci 0000:01:00.0: can't claim BAR 6 [mem 0x000c0000-0x000dffff]: no compatible bridge window The failure path of pcibios_allocate_dev_rom_resource() cleared out the resource start address, which also caused the following ioremap() warning: WARNING: CPU: 0 PID: 116 at /build/linux-akdJXO/linux-4.8.0/arch/x86/mm/ioremap.c:121 __ioremap_caller+0x1ec/0x370 ioremap on RAM at 0x0000000000000000 - 0x000000000001ffff Handle an option ROM shadow copy as RAM, without trying to insert it into the iomem resource tree. This fixes a regression caused by 0c0e0736acad ("PCI: Set ROM shadow location in arch code, not in PCI core"), which appeared in v4.6. The regression causes video device initialization to fail. This was reported on AMD Turks, but it likely affects others as well. Fixes: 0c0e0736acad ("PCI: Set ROM shadow location in arch code, not in PCI core") Reported-and-tested-by: Vecu Bosseur <vecu.bosseur@gmail.com> Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1627496 Link: https://bugzilla.kernel.org/show_bug.cgi?id=175391 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1352272 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.6+
2016-03-08PCI: Don't assign or reassign immutable resourcesBjorn Helgaas1-0/+6
IORESOURCE_PCI_FIXED means the resource can't be moved, so if it's set, don't bother trying to assign or reassign the resource. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02Merge branches 'pci/aer', 'pci/hotplug', 'pci/misc', 'pci/msi', ↵Bjorn Helgaas1-0/+7
'pci/resource' and 'pci/virtualization' into next * pci/aer: PCI/AER: Clear error status registers during enumeration and restore * pci/hotplug: PCI: pciehp: Queue power work requests in dedicated function * pci/misc: PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum x86/PCI: Make pci_subsys_init() static PCI: Add builtin_pci_driver() to avoid registration boilerplate PCI: Remove unnecessary "if" statement * pci/msi: x86/PCI: Don't alloc pcibios-irq when MSI is enabled PCI/MSI: Export all remapped MSIs to sysfs attributes PCI: Disable MSI on SiS 761 * pci/resource: sparc/PCI: Add mem64 resource parsing for root bus PCI: Expand Enhanced Allocation BAR output PCI: Make Enhanced Allocation bitmasks more obvious PCI: Handle Enhanced Allocation capability for SR-IOV devices PCI: Add support for Enhanced Allocation devices PCI: Add Enhanced Allocation register entries PCI: Handle IORESOURCE_PCI_FIXED when assigning resources PCI: Handle IORESOURCE_PCI_FIXED when sizing resources PCI: Clear IORESOURCE_UNSET when reverting to firmware-assigned address * pci/virtualization: PCI: Fix sriov_enable() error path for pcibios_enable_sriov() failures PCI: Wait 1 second between disabling VFs and clearing NumVFs PCI: Reorder pcibios_sriov_disable() PCI: Remove VFs in reverse order if virtfn_add() fails PCI: Remove redundant validation of SR-IOV offset/stride registers PCI: Set SR-IOV NumVFs to zero after enumeration PCI: Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs PCI: Don't try to restore VF BARs
2015-09-23PCI: Clear IORESOURCE_UNSET when reverting to firmware-assigned addressBjorn Helgaas1-0/+2
If pci_assign_resource() fails to assign space for a BAR, we may restore the BAR to whatever firmware left there at boot-time (this depends on whether the arch implements pcibios_retrieve_fw_addr()). The messages we print are not as useful as they could be: pci 0000:00:01.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] pci 0000:01:00.0: BAR 0: no space for [mem size 0x10000000 pref] pci 0000:01:00.0: BAR 0: trying firmware assignment [mem size 0x10000000 pref] pci 0000:01:00.0: BAR 0: [mem size 0x10000000 pref] conflicts with PCI Bus 0000:00 [mem 0xc0000000-0xffffffff window] The last two lines should contain the actual BAR address, not the size. Clear IORESOURCE_UNSET so we print the address. If requesting the firmware-assigned resource fails, mark it IORESOURCE_UNSET again. This is a cosmetic change to clarify the message: previously, if pci_revert_fw_address() succeeded, pci_assign_resource() cleared IORESOURCE_UNSET anyway, so this isn't really a functional change. Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491#c50 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-09-14PCI: Don't try to restore VF BARsWei Yang1-0/+5
VF BARs are read-only zero, so updating VF BARs will not have any effect. See the SR-IOV spec r1.1, sec 3.4.1.11. Don't update VF BARs in pci_restore_bars(). This avoids spurious "BAR %d: error updating" messages that we see when doing vfio pass-through after 6eb7018705de ("vfio-pci: Move idle devices to D3hot power state"). [bhelgaas: changelog, fix whitespace] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-03-12PCI: Mark invalid BARs as unassignedBjorn Helgaas1-0/+2
If a BAR is not inside any upstream bridge window, or if it conflicts with another resource, mark it as IORESOURCE_UNSET so we don't try to use it. We may be able to assign a different address for it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08PCI: Tidy resource assignment messagesBjorn Helgaas1-20/+9
Print messages about failures in pci_assign_resource(). We can drop the "by-hand" message from _pci_assign_resource() because %pR now prints the size rather than the address if the resource hasn't been assigned. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-08PCI: Return conventional error values from pci_revert_fw_address()Bjorn Helgaas1-8/+6
Previously we returned zero for success or 1 for failure. This changes that so we return zero for success or a negative errno for failure. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-08PCI: Cleanup control flowBjorn Helgaas1-16/+19
Return errors immediately so the straightline path is the normal, no-error path. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-03PCI: Keep original resource if we fail to expand itGuo Chao1-0/+7
If we have space assigned to a resource, we try to expand the resource (e.g., to accommodate SR-IOV resources), and the expansion attempt fails, we should keep the original assignment. After bd064f0a231a ("PCI: Mark resources as IORESOURCE_UNSET if we can't assign them"), we left the resource marked IORESOURCE_UNSET when the expansion failed, even if it had originally been set. That caused errors like this: pci 0003:00:00.0: can't enable device: BAR 15 [mem size 0x0c000000 64bit pref] not assigned pci 0003:00:00.0: Error enabling bridge (-22), continuing Fix this by restoring the original flags when reassignment fails. [bhelgaas: reworked to simplify, changelog] Fixes: bd064f0a231a ("PCI: Mark resources as IORESOURCE_UNSET if we can't assign them") Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.15+
2014-06-10PCI: Merge multi-line quoted stringsRyan Desfosses1-6/+6
Merge quoted strings that are broken across lines into a single entity. The compiler merges them anyway, but checkpatch complains about it, and merging them makes it easier to grep for strings. No functional change. [bhelgaas: changelog, do the same for everything under drivers/pci] Signed-off-by: Ryan Desfosses <ryan@desfo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-06-10PCI: Move EXPORT_SYMBOL so it immediately follows function/variableRyan Desfosses1-0/+1
Move EXPORT_SYMBOL so it immediately follows the function or variable. No functional change. [bhelgaas: squash similar changes, fix hotplug, probe, rom, search, too] Signed-off-by: Ryan Desfosses <ryan@desfo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-26Merge branches 'dma-api', 'pci/virtualization', 'pci/msi', 'pci/misc' and ↵Bjorn Helgaas1-10/+31
'pci/resource' into next * dma-api: iommu/exynos: Remove unnecessary "&" from function pointers DMA-API: Update dma_pool_create ()and dma_pool_alloc() descriptions DMA-API: Fix duplicated word in DMA-API-HOWTO.txt DMA-API: Capitalize "CPU" consistently sh/PCI: Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory() DMA-API: Change dma_declare_coherent_memory() CPU address to phys_addr_t DMA-API: Clarify physical/bus address distinction * pci/virtualization: PCI: Mark RTL8110SC INTx masking as broken * pci/msi: PCI/MSI: Remove pci_enable_msi_block() * pci/misc: PCI: Remove pcibios_add_platform_entries() s390/pci: use pdev->dev.groups for attribute creation PCI: Move Open Firmware devspec attribute to PCI common code * pci/resource: PCI: Add resource allocation comments PCI: Simplify __pci_assign_resource() coding style PCI: Change pbus_size_mem() return values to be more conventional PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources PCI: Support BAR sizes up to 8GB resources: Clarify sanity check message PCI: Don't add disabled subtractive decode bus resources PCI: Don't print anything while decoding is disabled PCI: Don't set BAR to zero if dma_addr_t is too small PCI: Don't convert BAR address to resource if dma_addr_t is too small PCI: Reject BAR above 4GB if dma_addr_t is too small PCI: Fail safely if we can't handle BARs larger than 4GB x86/gart: Tidy messages and add bridge device info x86/gart: Replace printk() with pr_info() x86/PCI: Move pcibios_assign_resources() annotation to definition x86/PCI: Mark ATI SBx00 HPET BAR as IORESOURCE_PCI_FIXED x86/PCI: Don't try to move IORESOURCE_PCI_FIXED resources x86/PCI: Fix Broadcom CNB20LE unintended sign extension
2014-05-23PCI: Add resource allocation commentsBjorn Helgaas1-16/+19
Add comments in the code to match the allocation strategy of 7c671426dfc3 ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources"). No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-23PCI: Simplify __pci_assign_resource() coding styleBjorn Helgaas1-4/+6
If an allocation succeeds, we can return success immediately. Then we don't have to test for success in the subsequent code. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-23PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resourcesYinghai Lu1-2/+18
This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-14PCI: Remove unnecessary includes of <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-03-19PCI: Don't enable decoding if BAR hasn't been assigned an addressBjorn Helgaas1-2/+8
Don't enable memory or I/O decoding if we haven't assigned or claimed the BAR's resource. If we enable decoding for a BAR that hasn't been assigned an address, we'll likely cause bus conflicts. This declines to enable decoding for resources with IORESOURCE_UNSET. Note that drivers can use pci_enable_device_io() or pci_enable_device_mem() if they only care about specific types of BARs. In that case, we don't bother checking whether the corresponding resources are assigned or claimed. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-27PCI: Don't try to claim IORESOURCE_UNSET resourcesBjorn Helgaas1-5/+10
If the IORESOURCE_UNSET bit is set, it means we haven't assigned an address yet, so don't try to claim the region. Also, make the error messages more uniform and add info about which BAR is involved. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-27PCI: Check IORESOURCE_UNSET before updating BARBjorn Helgaas1-0/+3
Check to make sure we don't update a BAR with an address we haven't assigned. If we haven't assigned an address to a resource, we shouldn't write it to a BAR. This isn't a problem for the usual path via pci_assign_resource(), which clears IORESOURCE_UNSET before calling pci_update_resource(), but paths like pci_restore_bars() can call this for resources we haven't assigned. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-27PCI: Don't clear IORESOURCE_UNSET when updating BARBjorn Helgaas1-5/+0
Clear IORESOURCE_UNSET when we assign an address to a resource, not when we write the address to the BAR. Also, drop the "BAR %d: set to %pR" message; this is mostly redundant with the "BAR %d: assigned %pR" message from pci_assign_resource(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-27PCI: Mark resources as IORESOURCE_UNSET if we can't assign themBjorn Helgaas1-0/+4
When assigning addresses to resources, mark them with IORESOURCE_UNSET before we start and clear IORESOURCE_UNSET if assignment is successful. That means that if we print the resource during assignment, we will show the size, not a meaningless address. Also, clear IORESOURCE_UNSET if we do assign an address, so we print the address when it is valid. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-21PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_devYinghai Lu1-1/+1
These interfaces: pcibios_resource_to_bus(struct pci_dev *dev, *bus_region, *resource) pcibios_bus_to_resource(struct pci_dev *dev, *resource, *bus_region) took a pci_dev, but they really depend only on the pci_bus. And we want to use them in resource allocation paths where we have the bus but not a device, so this patch converts them to take the pci_bus instead of the pci_dev: pcibios_resource_to_bus(struct pci_bus *bus, *bus_region, *resource) pcibios_bus_to_resource(struct pci_bus *bus, *resource, *bus_region) In fact, with standard PCI-PCI bridges, they only depend on the host bridge, because that's the only place address translation occurs, but we aren't going that far yet. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-11-14PCI: Fix whitespace, capitalization, and spelling errorsBjorn Helgaas1-1/+1
Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-15PCI: Remove unused variablesBjorn Helgaas1-2/+0
This fixes "set but not used" warnings found via "make W=1". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-18Merge branch 'pci/nikhil-big-bar-fixes' into nextBjorn Helgaas1-53/+54
* pci/nikhil-big-bar-fixes: PCI: reorder __pci_assign_resource() (no change) PCI: fix truncation of resource size to 32 bits
2012-07-11PCI: reorder __pci_assign_resource() (no change)Bjorn Helgaas1-52/+52
Reorder functions so __pci_assign_resource(), _pci_assign_resource(), and pci_assign_resource() are closer together. No code change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-11PCI: fix truncation of resource size to 32 bitsNikhil P Rao1-1/+2
_pci_assign_resource() took an int "size" argument, which meant that sizes larger than 4GB were truncated. Change type to resource_size_t. [bhelgaas: changelog] Signed-off-by: Nikhil P Rao <nikhil.rao@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09PCI: disable MEM decoding while updating 64-bit MEM BARsBjorn Helgaas1-0/+18
When we update 64-bit BARs, we have to perform two config writes. Between the writes, the half-written BAR value could match a MEM access intended for another device. This could result in corruption of this device (for writes) or an unexpected response machine check (for reads). To prevent this, disable MEM decoding while updating such BARs. This uses the same safety test as 253d2e5498, which disables both MEM and IO while sizing BARs, namely, we don't disable decoding for host bridge devices. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 06:52:12 +0000