summaryrefslogtreecommitdiffstats
path: root/drivers/pci/probe.c
AgeCommit message (Collapse)AuthorFilesLines
2018-06-06Merge branch 'pci/resource'Bjorn Helgaas1-1/+3
- add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) * pci/resource: PCI: Enable PCI_DOMAINS along with generic PCI host controller PCI: Add support for unbinding the generic PCI host controller PCI: Rework of_pci_get_host_bridge_resources() to devm_of_pci_get_host_bridge_resources() PCI: Use dev_printk() in of_pci_get_host_bridge_resources() PCI: Pass struct device to of_pci_get_host_bridge_resources() PCI: Rename of_pci_get_host_bridge_resources() device node parameter PCI: Fix devm_pci_alloc_host_bridge() memory leak PCI: Make pci_get_new_domain_nr() static
2018-06-06Merge branch 'pci/hotplug'Bjorn Helgaas1-13/+22
- fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) * pci/hotplug: PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: shpchp: Use dev_printk() for OSHP-related messages PCI: shpchp: Remove get_hp_hw_control_from_firmware() wrapper PCI: shpchp: Remove acpi_get_hp_hw_control_from_firmware() flags PCI: shpchp: Rely on previous _OSC results PCI: shpchp: Request SHPC control via _OSC when adding host bridge PCI: shpchp: Convert SHPC to be builtin only PCI: pciehp: Make pciehp_is_native() stricter PCI: pciehp: Rename host->native_hotplug to host->native_pcie_hotplug PCI: pciehp: Request control of native hotplug only if supported PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume PCI: pnv_php: Add missing of_node_put() PCI: pciehp: Add quirk for Command Completed errata PCI: Add Qualcomm vendor ID PCI: ibmphp: Fix use-before-set in get_max_bus_speed() # Conflicts: # drivers/acpi/pci_root.c
2018-06-06Merge branch 'pci/enumeration'Bjorn Helgaas1-0/+52
- neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) * pci/enumeration: PCI: Remove unused pcie_get_minimum_link() ixgbe: Report PCIe link properties with pcie_print_link_status() cxgb4: Report PCIe link properties with pcie_print_link_status() bnxt_en: Report PCIe link properties with pcie_print_link_status() bnx2x: Report PCIe link properties with pcie_print_link_status() PCI: Prevent sysfs disable of device while driver is attached PCI: Check whether bridges allow access to extended config space x86/PCI: Make pci=earlydump output neat
2018-06-04PCI: Improve "partially hidden behind bridge" log messageMika Westerberg1-9/+4
pci_scan_child_bus_extend() complains when we assign an unreachable secondary bus number to a bridge. For example, given the topology below: +-1b.0-[01-39]----00.0-[02-3a]--+-00.0-[03]----00.0 +-01.0-[04-39]-- \-02.0-[3a]----00.0 it logs the following messages: pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:02 [bus 02-39] pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:01 [bus 01-39] These messages are incorrect (0000:02 is a bus, not a bridge) and confusing. Make the message more understandable: pci 0000:02:02.0: devices behind bridge are unusable because [bus 3a] cannot be assigned for them Also, remove the reference to CardBus, because this issue affects all varieties of PCI, not just CardBus. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-04PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() docMika Westerberg1-0/+4
It is not immediately clear what the two functions actually return so add kernel-doc comment explaining it a bit better. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-06-04PCI: Account for all bridges on bus when distributing bus numbersMika Westerberg1-3/+12
When distributing extra bus number space to hotplug bridges for future extension, we don't account for the fact that there might be non-hotplug bridges on the bus after the hotplug bridges. For example: 01:00.0 --+- 02:00.0 (HotPlug-) -- Thunderbolt host controller +- 02:01.0 (HotPlug+) \- 02:02.0 (HotPlug-) -- xHCI host controller pci_scan_child_bus_extend() is supposed to distribute the remaining bus numbers to the hotplug bridge at 02:01.0, but only after accounting for all bridges on bus 02. Since we don't check whether there's another non-hotplug bridge after the hotplug bridge 02:01.0, it may not leave space for the non-hotplug bridge: pci 0000:00:1b.0: PCI bridge to [bus 01-39] (Root Port) pci 0000:01:00.0: PCI bridge to [bus 02-39] ... pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:02:01.0: PCI bridge to [bus 04] pci_bus 0000:04: [bus 04-39] extended by 0x35 pci_bus 0000:04: bus scan returning with max=39 pci_bus 0000:04: busn_res: [bus 04-39] end is updated to 39 pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 1 pci_bus 0000:3a: scanning bus pci_bus 0000:3a: bus scan returning with max=3a pci_bus 0000:3a: busn_res: [bus 3a] end is updated to 3a pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:02 [bus 02-39] pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:01 [bus 01-39] pci_bus 0000:02: bus scan returning with max=3a pci_bus 0000:02: busn_res: [bus 02-39] end can not be updated to 3a The resulting 'lspci -t' output looks like this: +-1b.0-[01-39]----00.0-[02-3a]--+-00.0-[03]----00.0 ^^ +-01.0-[04-39]-- \-02.0-[3a]----00.0 ^^ The xHCI host controller behind 02:02.0 is not usable because it would have to be assigned bus 3a, which is not accessible through 00:1b.0. To fix this, reserve at least one bus for each bridge while scanning already configured bridges. Then use this information in the second scan to correct the available extra bus space for hotplug bridges. After this change the 'lspci -t' output is what is expected: +-1b.0-[01-39]----00.0-[02-39]--+-00.0-[03]----00.0 +-01.0-[04-38]-- \-02.0-[39]----00.0 The xHCI controller is now on bus 39, where it is usable. Fixes: 1c02ea810065 ("PCI: Distribute available buses to hotplug-capable bridges") Reported-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org
2018-06-02PCI: shpchp: Request SHPC control via _OSC when adding host bridgeMika Westerberg1-0/+1
The SHPC driver now must be builtin (it cannot be a module). If it is present, request SHPC control immediately when adding the ACPI host bridge. This is similar to how we handle native PCIe hotplug via pciehp. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-02PCI: pciehp: Rename host->native_hotplug to host->native_pcie_hotplugMika Westerberg1-1/+1
Rename host->native_hotplug to host->native_pcie_hotplug to make room for a similar flag for SHPC hotplug. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-30PCI: Fix devm_pci_alloc_host_bridge() memory leakJan Kiszka1-1/+3
Fix a memory leak by freeing the PCI resource list in devm_pci_release_host_bridge_dev(). Fixes: 5c3f18cce083 ("PCI: Add devm_pci_alloc_host_bridge() interface") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-07PCI: Check whether bridges allow access to extended config spaceGilles Buloz1-0/+52
Even if a device supports extended config space, i.e., it is a PCI-X Mode 2 or a PCI Express device, the extended space may not be accessible if there's a conventional PCI bus in the path to it. We currently figure that out in pci_cfg_space_size() by reading the first dword of extended config space. On most platforms that returns ~0 data if the space is inaccessible, but it may set error bits in PCI status registers, and on some platforms it causes exceptions that we currently don't recover from. For example, a PCIe-to-conventional PCI bridge treats config transactions with a non-zero Extended Register Address as an Unsupported Request on PCIe and a received Master-Abort on the destination bus (see PCI Express to PCI/PCI-X Bridge spec, r1.0, sec 4.1.3). A sample case is a LS1043A CPU (NXP QorIQ Layerscape) platform with the following bus topology: LS1043 PCIe Root Port -> PEX8112 PCIe-to-PCI bridge (doesn't support ext cfg on PCI side) -> PMC slot connector (for legacy PMC modules) With a PMC module topology as follows: PMC connector -> PCI-to-PCIe bridge -> PCIe switch (4 ports) -> 4 PCIe devices (one on each port) The PCIe devices on the PMC module support extended config space, but we can't reach it because the PEX8112 can't generate accesses to the extended space on its secondary bus. Attempts to access it cause Unsupported Request errors, which result in synchronous aborts on this platform. To avoid these errors, check whether bridges are capable of generating extended config space addresses on their secondary interfaces. If they can't, we restrict devices below the bridge to only the 256-byte PCI-compatible config space. Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com> [bhelgaas: changelog, rework patch so bus_flags testing is all in pci_bridge_child_ext_cfg_accessible()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-23PCI/ACPI: Request LTR control from platform before using itBjorn Helgaas1-0/+5
Per the PCI Firmware spec r3.2, sec 4.5, an ACPI-based OS should use _OSC to request control of Latency Tolerance Reporting (LTR) before using it. Request control of LTR, and if the platform does not grant control, don't use it. N.B. If the hardware supports LTR and the ASPM L1.2 substate but the BIOS doesn't support LTR in _OSC, we previously would enable ASPM L1.2. This patch will prevent us from enabling ASPM L1.2 in that case. It does not prevent us from enabling PCI-PM L1.2, since that doesn't depend on LTR. See PCIe r40, sec 5.5.1, for the L1 PM substate entry conditions. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-06Merge tag 'pci-v4.17-changes' of ↵Linus Torvalds1-7/+68
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...
2018-04-04Merge branch 'pci/virtualization'Bjorn Helgaas1-5/+56
- probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) * pci/virtualization: PCI/IOV: Add missing prototypes for powerpc pcibios interfaces PCI/IOV: Use VF0 cached config registers for other VFs PCI/IOV: Skip BAR sizing for VFs PCI/IOV: Skip INTx config reads for VFs PCI: Wait for device to become ready after secondary bus reset PCI: Add a return type for pci_reset_bridge_secondary_bus() PCI: Wait for device to become ready after a power management reset PCI: Rename pci_flr_wait() to pci_dev_wait() and make it generic PCI: Handle FLR failure and allow other reset types PCI: Protect restore with device lock to be consistent PCI: Add function 1 DMA alias quirk for Marvell 88SE9220 PCI: Add ACS quirk for Ampere root ports PCI: Remove redundant probes for device reset support PCI: Probe for device reset support during enumeration Conflicts: include/linux/pci.h
2018-04-04Merge branch 'pci/portdrv'Bjorn Helgaas1-0/+10
- move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) * pci/portdrv: PCI/DPC: Rename from pcie-dpc.c to dpc.c PCI/DPC: Do not enable DPC if AER control is not allowed by the BIOS PCI/AER: Use cached AER Capability offset PCI/portdrv: Rename and reverse sense of pcie_ports_auto PCI/portdrv: Encapsulate pcie_ports_auto inside the port driver PCI/portdrv: Remove unnecessary "pcie_ports=auto" parameter PCI/portdrv: Remove "pcie_hp=nomsi" kernel parameter PCI/portdrv: Remove unnecessary include of <linux/pci-aspm.h> PCI/portdrv: Simplify PCIe feature permission checking PCI/portdrv: Remove unused PCIE_PORT_SERVICE_VC PCI/portdrv: Remove pcie_port_bus_type link order dependency PCI/portdrv: Disable port driver in compat mode PCI/PM: Clear PCIe PME Status bit for Root Complex Event Collectors PCI/PM: Clear PCIe PME Status bit in core, not PCIe port driver PCI/PM: Move pcie_clear_root_pme_status() to core PCI/portdrv: Merge pcieport_if.h into portdrv.h PCI/portdrv: Move pcieport_if.h to drivers/pci/pcie/ Conflicts: drivers/pci/pcie/Makefile drivers/pci/pcie/portdrv.h
2018-04-04Merge branch 'pci/misc'Bjorn Helgaas1-1/+1
- use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) * pci/misc: PCI: Always define the of_node helpers PCI: Tidy comments PCI: Tidy Makefiles mcb: Add Altera PCI ID to mcb-pci PCI: Add Altera vendor ID PCI: Report quirks that take more than 10ms PCI: Report quirk timings with pci_info() instead of pr_debug() PCI: Fix NULL pointer dereference in of_pci_bus_find_domain_nr() rapidio/tsi721: use PCI_EXP_DEVCTL2_COMP_TIMEOUT macro
2018-03-31PCI/IOV: Use VF0 cached config registers for other VFsKarimAllah Ahmed1-5/+42
Cache some config data from VF0 and use it for all other VFs instead of reading it from the config space of each VF. We assume these items are the same across all associated VFs: Revision ID Class Code Subsystem Vendor ID Subsystem ID This is an optimization when enabling SR-IOV on a device with many VFs. Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> [bhelgaas: changelog, simplify comments, remove unused "device", test CONFIG_PCI_IOV instead of CONFIG_PCI_ATS, rename functions] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-03-30PCI/portdrv: Simplify PCIe feature permission checkingBjorn Helgaas1-0/+10
Some PCIe features (AER, DPC, hotplug, PME) can be managed by either the platform firmware or the OS, so the host bridge driver may have to request permission from the platform before using them. On ACPI systems, this is done by negotiate_os_control() in acpi_pci_root_add(). The PCIe port driver later uses pcie_port_platform_notify() and pcie_port_acpi_setup() to figure out whether it can use these features. But all we need is a single bit for each service, so these interfaces are needlessly complicated. Simplify this by adding bits in the struct pci_host_bridge to show when the OS has permission to use each feature: + unsigned int native_aer:1; /* OS may use PCIe AER */ + unsigned int native_hotplug:1; /* OS may use PCIe hotplug */ + unsigned int native_pme:1; /* OS may use PCIe PME */ These are set when we create a host bridge, and the host bridge driver can clear the bits corresponding to any feature the platform doesn't want us to use. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-21PCI: Add decoding for 16 GT/s link speedJay Fang1-1/+1
PCIe 4.0 defines the 16.0 GT/s link speed. Links can run at that speed without any Linux changes, but previously their sysfs "max_link_speed" and "current_link_speed" files contained "Unknown speed", not the expected "16.0 GT/s". Add decoding for the new 16 GT/s link speed. Signed-off-by: Jay Fang <f.fangjian@huawei.com> [bhelgaas: add PCI_EXP_LNKCAP2_SLS_16_0GB] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dongdong Liu <liudongdong3@huawei.com>
2018-03-19PCI/IOV: Skip BAR sizing for VFsKarimAllah Ahmed1-0/+4
Per PCIe r4.0, sec 9.3.4.1.11, the BAR registers in VF config space are all RO Zero, so skip sizing them. This is an optimization when enabling SR-IOV on a device with many VFs. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19PCI: Tidy commentsBjorn Helgaas1-1/+1
Remove pointless comments that tell us the file name, remove blank line comments, follow multi-line comment conventions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-08PCI: Scan all functions when running over JailhouseJan Kiszka1-3/+19
Per PCIe r4.0, sec 7.5.1.1.9, multi-function devices are required to have a function 0. Therefore, Linux scans for devices at function 0 (devfn 0/8/16/...) and only scans for other functions if function 0 has its Multi-Function Device bit set or ARI or SR-IOV indicate there are more functions. The Jailhouse hypervisor may pass individual functions of a multi-function device to a guest without passing function 0, which means a Linux guest won't find them. Change Linux PCI probing so it scans all function numbers when running as a guest over Jailhouse. This is technically prohibited by the spec, so it is possible that PCI devices without the Multi-Function Device bit set may have unexpected behavior in response to this probe. Originally-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: jailhouse-dev@googlegroups.com Cc: Benedikt Spranger <b.spranger@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Link: https://lkml.kernel.org/r/06e279b2a3e06cf6689ab3975f8ab592bba02362.1520408357.git.jan.kiszka@siemens.com
2018-03-05PCI/IOV: Skip INTx config reads for VFsKarimAllah Ahmed1-0/+7
Per PCIe r4.0, sec 9.2.1.4, VFs can not implement INTX, and their Interrupt Line and Interrupt Pin registers must be RO Zero. Some devices have thousands of VFs, so skip reading the registers as an optimization. Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> [bhelgaas: changelog, comment] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-02-16PCI: Probe for device reset support during enumerationBjorn Helgaas1-0/+3
Previously we called pci_probe_reset_function() in this path: pci_sysfs_init # late_initcall for_each_pci_dev(dev) pci_create_sysfs_dev_files(dev) pci_create_capabilities_sysfs(dev) pci_probe_reset_function pci_dev_specific_reset pcie_has_flr pcie_capability_read_dword pci_sysfs_init() is a late_initcall, and a driver may have already claimed one of these devices and enabled runtime power management for it, so the device could already be in D3 by the time we get to pci_sysfs_init(). The device itself should respond to the config read even while it's in D3hot, but if an upstream bridge is also in D3hot, the read won't even reach the device because the bridge won't forward it downstream to the device. If the bridge is a PCIe port, it should complete the read as an Unsupported Request, which may be reported to the CPU as an exception or as invalid data. Avoid this case by probing for reset support from pci_init_capabilities(), before a driver can claim the device. The device may be in D3hot, but any bridges leading to it should be in D0, so the device's config space should be fully accessible at that point. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-01Merge branch 'pci/spdx' into nextBjorn Helgaas1-0/+1
* pci/spdx: PCI: Add SPDX GPL-2.0+ to replace implicit GPL v2 or later statement PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate PCI: Add SPDX GPL-2.0 to replace COPYING boilerplate PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate PCI: Add SPDX GPL-2.0 when no license was specified
2018-01-31Merge remote-tracking branch 'lorenzo/pci/cadence' into nextBjorn Helgaas1-0/+33
* lorenzo/pci/cadence: PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile Conflicts: drivers/pci/of.c include/linux/pci.h
2018-01-31Merge branch 'pci/trivial' into nextBjorn Helgaas1-89/+116
* pci/trivial: PCI: Clean up whitespace in linux/pci.h, pci/pci.h PCI: Tidy up pci/probe.c comments
2018-01-31Merge branch 'pci/misc' into nextBjorn Helgaas1-38/+37
* pci/misc: PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build PCI: Add wrappers for dev_printk() PCI: Remove unnecessary messages for memory allocation failures PCI: Add #defines for Completion Timeout Disable feature hinic: Replace PCI pool old API net: e100: Replace PCI pool old API block: DAC960: Replace PCI pool old API MAINTAINERS: Include more PCI files PCI: Remove unneeded kallsyms include powerpc/pci: Unroll two pass loop when scanning bridges powerpc/pci: Use for_each_pci_bridge() helper
2018-01-31Merge branch 'pci/enumeration' into nextBjorn Helgaas1-10/+15
* pci/enumeration: RDMA/qedr: Use pci_enable_atomic_ops_to_root() PCI: Add pci_enable_atomic_ops_to_root() PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports
2018-01-31PCI: Add generic function to probe PCI host controllersCyrille Pitchen1-0/+33
This patchs moves generic source code from drivers/pci/host/pci-host-common.c into drivers/pci/probe.c. Indeed the extracted lines of code were duplicated by many host controller drivers. Regrouping them into a generic function gives a change to properly share this code without introducing a useless dependency to PCI_HOST_COMMON, which selects PCI_ECAM when not needed by most host controller drivers. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-01-26PCI: Add SPDX GPL-2.0 when no license was specifiedBjorn Helgaas1-0/+1
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") added SPDX GPL-2.0 to several PCI files that previously contained no license information. Add SPDX GPL-2.0 to all other PCI files that did not contain any license information and hence were under the default GPL version 2 license of the kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-18PCI: Add wrappers for dev_printk()Frederick Lawler1-38/+37
Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: squash into one patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-18PCI: Tidy up pci/probe.c commentsBjorn Helgaas1-89/+116
No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-18PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream PortsBjorn Helgaas1-10/+15
PCIe Downstream Ports normally have only a Device 0 below them. To optimize enumeration, we don't scan for other devices *unless* the PCI_SCAN_ALL_PCIE_DEVS flag is set by set by quirks or the "pci=pcie_scan_all" kernel parameter. Previously PCI_SCAN_ALL_PCIE_DEVS only affected scanning below Switch Downstream Ports, not Root Ports. But the "Nemo" system, also known as the AmigaOne X1000, has a PA Semi Root Port whose link leads to an AMD/ATI SB600 South Bridge. The Root Port is a PCIe device, of course, but the SB600 contains only conventional PCI devices with no visible PCIe port. Simplify and restructure only_one_child() so that we scan for all possible devices below Root Ports as well as Switch Downstream Ports when PCI_SCAN_ALL_PCIE_DEVS is set. This is enough to make Nemo work with "pci=pcie_scan_all". We would also like to add a quirk to set PCI_SCAN_ALL_PCIE_DEVS automatically on Nemo so users wouldn't have to use the "pci=pcie_scan_all" parameter, but we don't have that yet. Link: https://lkml.kernel.org/r/CAErSpo55Q8Q=5p6_+uu7ahnw+53ibVDNRXxrzRV9QnUr_9EUfw@mail.gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=198057 Reported-and-Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-18PCI/ASPM: Enable Latency Tolerance Reporting when supportedBjorn Helgaas1-0/+33
Enable Latency Tolerance Reporting (LTR). Note that LTR must be enabled in the Root Port first, and must not be enabled in any downstream device unless the Root Port and all intermediate Switches also support LTR. See PCIe r3.1, sec 6.18. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
2017-11-06PCI: Distribute available buses to hotplug-capable bridgesMika Westerberg1-18/+138
System BIOS sometimes allocates extra bus space for hotplug-capable PCIe root/downstream ports. This space is needed if the device plugged to the port will have more hotplug-capable downstream ports. A good example of this is Thunderbolt. Each Thunderbolt device contains a PCIe switch and one or more hotplug-capable PCIe downstream ports where the daisy chain can be extended. Currently Linux only allocates minimal bus space to make sure all the enumerated devices barely fit there. The BIOS reserved extra space is not taken into consideration at all. Because of this we run out of bus space pretty quickly when more PCIe devices are attached to hotplug downstream ports in order to extend the chain. Modify the PCI core so we distribute the available BIOS allocated bus space equally between hotplug-capable bridges to make sure there is enough bus space for extending the hierarchy later on. Update kernel docs of the affected functions. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-06PCI: Do not allocate more buses than available in parentMika Westerberg1-1/+6
One can ask more buses to be reserved for hotplug bridges by passing pci=hpbussize=N in the kernel command line. If the parent bus does not have enough bus space available we incorrectly create child bus with the requested number of subordinate buses. In the example below hpbussize is set to one more than we have available buses in the root port: pci 0000:07:00.0: [8086:1578] type 01 class 0x060400 pci 0000:07:00.0: scanning [bus 00-00] behind bridge, pass 0 pci 0000:07:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:07:00.0: scanning [bus 00-00] behind bridge, pass 1 pci_bus 0000:08: busn_res: can not insert [bus 08-ff] under [bus 07-3f] (conflicts with (null) [bus 07-3f]) pci_bus 0000:08: scanning bus ... pci_bus 0000:0a: bus scan returning with max=40 pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 40 pci_bus 0000:0a: [bus 0a-40] partially hidden behind bridge 0000:07 [bus 07-3f] pci_bus 0000:08: bus scan returning with max=40 pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 40 Instead of allowing this, limit the subordinate number to be less than or equal the maximum subordinate number allocated for the parent bus (if it has any). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: remove irrelevant dmesg messages] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-06PCI: Open-code the two pass loop when scanning bridgesMika Westerberg1-7/+20
The current scanning code is really hard to understand because it calls the same function in a loop where pass value is changed without any comments explaining it: for (pass = 0; pass < 2; pass++) for_each_pci_bridge(dev, bus) max = pci_scan_bridge(bus, dev, max, pass); Unfamiliar reader cannot tell easily what is the purpose of this loop without looking at internals of pci_scan_bridge(). In order to make this bit easier to understand, open-code the loop in pci_scan_child_bus() and pci_hp_add_bridge() with added comments. No functional changes intended. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-06PCI: Move pci_hp_add_bridge() to drivers/pci/probe.cMika Westerberg1-0/+23
There is not much point of having a file with a single function in it. Instead we can just move pci_hp_add_bridge() to drivers/pci/probe.c and make it available always when PCI core is enabled. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: convert printk to dev_err()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-06PCI: Add for_each_pci_bridge() helperAndy Shevchenko1-4/+2
The following pattern is often used: list_for_each_entry(dev, &bus->devices, bus_list) { if (pci_is_bridge(dev)) { ... } } Add a for_each_pci_bridge() helper to make that code easier to write and read by reducing indentation level. It also saves one or few lines of code in each occurrence. Convert PCI core parts here at the same time. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [bhelgaas: fold in http://lkml.kernel.org/r/20171013165352.25550-1-andriy.shevchenko@linux.intel.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-09-08Merge tag 'pci-v4.14-changes' of ↵Linus Torvalds1-28/+93
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add enhanced Downstream Port Containment support, which prints more details about Root Port Programmed I/O errors (Dongdong Liu) - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang) - add MediaTek MT2712 and MT7622 support (Ryder Lee) - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang) - add Qualcom IPQ8074 support (Varadarajan Narayanan) - add R-Car r8a7743/5 device tree support (Biju Das) - add Rockchip per-lane PHY support for better power management (Shawn Lin) - fix IRQ mapping for hot-added devices by replacing the pci_fixup_irqs() boot-time design with a host bridge hook called at probe-time (Lorenzo Pieralisi, Matthew Minter) - fix race when enabling two devices that results in upstream bridge not being enabled correctly (Srinath Mannam) - fix pciehp power fault infinite loop (Keith Busch) - fix SHPC bridge MSI hotplug events by enabling bus mastering (Aleksandr Bezzubikov) - fix a VFIO issue by correcting PCIe capability sizes (Alex Williamson) - fix an INTD issue on Xilinx and possibly other drivers by unifying INTx IRQ domain support (Paul Burton) - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg Roedel) - allow APM X-Gene device assignment to guests by adding an ACS quirk (Feng Kan) - fix driver crashes by disabling Extended Tags on Broadcom HT2100 (Extended Tags support is required for PCIe Receivers but not Requesters, and we now enable them by default when Requesters support them) (Sinan Kaya) - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs use the real Requester ID (not a phantom RID) (Robin Murphy) - prevent assignment of Intel VMD children to guests (which may be supported eventually, but isn't yet) by not associating an IOMMU with them (Jon Derrick) - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott Bauer) - fix a Function-Level Reset issue with Intel 750 NVMe by waiting longer (up to 60sec instead of 1sec) for device to become ready (Sinan Kaya) - fix a Function-Level Reset issue on iProc Stingray by working around hardware defects in the CRS implementation (Oza Pawandeep) - fix an issue with Intel NVMe P3700 after an iProc reset by adding a delay during shutdown (Oza Pawandeep) - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking in compose_msi_msg() (Stephen Hemminger) - fix a wireless LAN driver timeout by clearing DesignWare MSI interrupt status after it is handled, not before (Faiz Abbas) - fix DesignWare ATU enable checking (Jisheng Zhang) - reduce Layerscape dependencies on the bootloader by doing more initialization in the driver (Hou Zhiqiang) - improve Intel VMD performance allowing allocation of more IRQ vectors than present CPUs (Keith Busch) - improve endpoint framework support for initial DMA mask, different BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon Vijay Abraham I, Stan Drozd) - rework CRS support to add periodic messages while we poll during enumeration and after Function-Level Reset and prepare for possible other uses of CRS (Sinan Kaya) - clean up Root Port AER handling by removing unnecessary code and moving error handler methods to struct pcie_port_service_driver (Christoph Hellwig) - clean up error handling paths in various drivers (Bjorn Andersson, Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen, Lorenzo Pieralisi, Sergei Shtylyov) - clean up SR-IOV resource handling by disabling VF decoding before updating the corresponding resource structs (Gavin Shan) - clean up DesignWare-based drivers by unifying quirks to update Class Code and Interrupt Pin and related handling of write-protected registers (Hou Zhiqiang) - clean up by adding empty generic pcibios_align_resource() and pcibios_fixup_bus() and removing empty arch-specific implementations (Palmer Dabbelt) - request exclusive reset control for several drivers to allow cleanup elsewhere (Philipp Zabel) - constify various structures (Arvind Yadav, Bhumika Goyal) - convert from full_name() to %pOF (Rob Herring) - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn Lin) * tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits) PCI: xgene: Clean up whitespace PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset PCI: xgene: Fix platform_get_irq() error handling PCI: xilinx-nwl: Fix platform_get_irq() error handling PCI: rockchip: Fix platform_get_irq() error handling PCI: altera: Fix platform_get_irq() error handling PCI: spear13xx: Fix platform_get_irq() error handling PCI: artpec6: Fix platform_get_irq() error handling PCI: armada8k: Fix platform_get_irq() error handling PCI: dra7xx: Fix platform_get_irq() error handling PCI: exynos: Fix platform_get_irq() error handling PCI: iproc: Clean up whitespace PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP PCI: iproc: Add 500ms delay during device shutdown PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag() PCI/AER: Reformat AER register definitions iommu/vt-d: Prevent VMD child devices from being remapping targets x86/PCI: Use is_vmd() rather than relying on the domain number ...
2017-09-07Merge branch 'pci/resource' into nextBjorn Helgaas1-0/+9
* pci/resource: microblaze/PCI: Remove pcibios_setup_bus_{self/devices} dead code ARC: Remove empty kernel/pcibios.c PCI: Add a generic weak pcibios_align_resource() PCI: Add a generic weak pcibios_fixup_bus()
2017-08-29PCI: Warn periodically while waiting for non-CRS ("device ready") statusSinan Kaya1-3/+13
Add a print statement in pci_bus_wait_crs() so that user observes the progress of device polling instead of silently waiting for timeout to be reached. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> [bhelgaas: check for timeout first so we don't print "waiting, giving up", always print time we've slept (not the actual timeout, print a "ready" message if we've printed a "waiting" message] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-29PCI: Factor out pci_bus_wait_crs()Sinan Kaya1-16/+27
Configuration Request Retry Status (CRS) was previously hidden inside pci_bus_read_dev_vendor_id(). We want to add support for CRS in other situations, such as waiting for a device to become ready after a Function Level Reset. Move CRS handling into pci_bus_wait_crs() so it can be called from other places. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> [bhelgaas: pass pointer, not value, to pci_bus_wait_crs() so caller gets correct Vendor ID] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-29PCI: Add pci_bus_crs_vendor_id() to detect CRS response dataSinan Kaya1-1/+6
Add pci_bus_crs_vendor_id() to determine whether data returned for a config read of the Vendor ID indicates a Configuration Request Retry Status (CRS) response. Per PCIe r3.1, sec 2.3.2, this data is only returned if: - CRS Software Visibility is enabled, - a config read includes both bytes of the Vendor ID, and - the read receives a CRS completion Signed-off-by: Sinan Kaya <okaya@codeaurora.org> [bhelgaas: changelog, change name to pci_bus_crs_vendor_id(), make static in probe.c, use it in pci_bus_read_dev_vendor_id()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-29PCI: Always check for non-CRS response before timeoutBjorn Helgaas1-5/+6
While waiting for a device to become ready (i.e., to return a non-CRS completion to a read of its Vendor ID), if we got a valid response to the very last read before timing out, we printed a warning and gave up on the device even though it was actually ready. For a typical 60s timeout, we wait about 65s (it's not exact because of the exponential backoff), but we treated devices that became ready between 33s and 65s as though they failed. Move the Device ID read later so we check whether the device is ready before checking for a timeout. Thanks to Sinan Kaya <okaya@codeaurora.org>, reorder reads so we always check device presence after sleep, since it's pointless to sleep unless we recheck afterwards. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-14PCI: Disable PCIe Relaxed Ordering if unsupporteddingtianhong1-0/+43
When bit4 is set in the PCIe Device Control register, it indicates whether the device is permitted to use relaxed ordering. On some platforms using relaxed ordering can have performance issues or due to erratum can cause data-corruption. In such cases devices must avoid using relaxed ordering. The patch adds a new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING to indicate that Relaxed Ordering (RO) attribute should not be used for Transaction Layer Packets (TLP) targeted towards these affected root complexes. This patch checks if there is any node in the hierarchy that indicates that using relaxed ordering is not safe. In such cases the patch turns off the relaxed ordering by clearing the capability for this device. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Ashok Raj <ashok.raj@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02PCI: Add a generic weak pcibios_fixup_bus()Palmer Dabbelt1-0/+9
Multiple architectures define this as an empty function, and I'm adding another one as part of the RISC-V port. Add a __weak version of pcibios_fixup_bus() and delete the now-obselete ones in a handful of ports. The only functional change should be that microblaze used to export pcibios_fixup_bus(). None of the other architectures exports this, so I just dropped it. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-31PCI: Mark Broadcom HT2100 Root Port Extended Tags as brokenSinan Kaya1-7/+36
Per PCIe r3.1, sec 2.2.6.2 and 7.8.4, a Requester may not use 8-bit Tags unless its Extended Tag Field Enable is set, but all Receivers/Completers must handle 8-bit Tags correctly regardless of their Extended Tag Field Enable. Some devices do not handle 8-bit Tags as Completers, so add a quirk for them. If we find such a device, we disable Extended Tags for the entire hierarchy to make peer-to-peer DMA possible. The Broadcom HT2100 seems to have issues with handling 8-bit tags. Mark it as broken. The pci_walk_bus() in the quirk handles devices we've enumerated in the past, and pci_configure_device() handles devices we enumerate in the future. Fixes: 60db3a4d8cc9 ("PCI: Enable PCIe Extended Tags if supported") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1467674 Reported-and-tested-by: Wim ten Have <wim.ten.have@oracle.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> [bhelgaas: changelog, tweak messages, rename bit and quirk] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-03Merge branch 'pci/irq-fixups' into nextBjorn Helgaas1-29/+76
* pci/irq-fixups: arm64: PCI: Drop DT IRQ allocation from pcibios_alloc_irq() PCI: xilinx-nwl: Move to struct pci_host_bridge IRQ mapping functions PCI: rockchip: Move to struct pci_host_bridge IRQ mapping functions PCI: xgene: Move to struct pci_host_bridge IRQ mapping functions PCI: altera: Drop pci_fixup_irqs() PCI: versatile: Drop pci_fixup_irqs() PCI: generic: Drop pci_fixup_irqs() PCI: faraday: Drop pci_fixup_irqs() PCI: designware: Drop pci_fixup_irqs() PCI: iproc: Drop pci_fixup_irqs() PCI: rcar: Drop pci_fixup_irqs() PCI: xilinx: Drop pci_fixup_irqs() PCI: tegra: Drop pci_fixup_irqs() ARM/PCI: Remove pci_fixup_irqs() call for bios32 host controllers PCI: Add a call to pci_assign_irq() in pci_device_probe() OF/PCI: Update of_irq_parse_and_map_pci() comment PCI: Add pci_assign_irq() function and have pci_fixup_irqs() use it PCI: Add IRQ mapping function pointers to pci_host_bridge struct PCI: Build setup-irq.o on all arches PCI: Remove pci_scan_root_bus_msi() PCI: xilinx-nwl: Convert PCI scan API to pci_scan_root_bus_bridge() PCI: rockchip: Convert PCI scan API to pci_scan_root_bus_bridge() PCI: generic: Convert PCI scan API to pci_scan_root_bus_bridge() PCI: xgene: Convert PCI scan API to pci_scan_root_bus_bridge() PCI: xilinx: Convert PCI scan API to pci_scan_root_bus_bridge() PCI: altera: Convert PCI scan API to pci_scan_root_bus_bridge() PCI: versatile: Convert PCI scan API to pci_scan_root_bus_bridge() PCI: iproc: Convert PCI scan API to pci_scan_root_bus_bridge() PCI: rcar: Convert PCI scan API to pci_scan_root_bus_bridge() PCI: aardvark: Convert PCI scan API to pci_scan_root_bus_bridge() PCI: designware: Convert PCI scan API to pci_scan_root_bus_bridge() ARM/PCI: Convert PCI scan API to pci_scan_root_bus_bridge() PCI: Make pci_register_host_bridge() PCI core internal PCI: Add pci_scan_root_bus_bridge() interface PCI: tegra: Fix host bridge memory leakage PCI: faraday: Fix host bridge memory leakage PCI: Add devm_pci_alloc_host_bridge() interface PCI: Add pci_free_host_bridge() interface PCI: Initialize bridge release function at bridge allocation PCI: faraday: Convert IRQ masking to raw PCI config accessors PCI: iproc: Convert link check to raw PCI config accessors PCI: xilinx-nwl: Remove nwl_pcie_enable_msi() unused bus parameter
2017-07-02PCI: Remove pci_scan_root_bus_msi()Lorenzo Pieralisi1-22/+5
The pci_scan_root_bus_bridge() function allows passing a parameterized struct pci_host_bridge and scanning the resulting PCI bus; since the struct msi_controller is part of the struct pci_host_bridge and the struct pci_host_bridge can now be passed to pci_scan_root_bus_bridge() explicitly, there is no need for a scan interface with a MSI controller parameter. With all PCI host controller drivers and platform code relying on pci_scan_root_bus_msi() converted over to pci_scan_root_bus_bridge() the pci_scan_root_bus_msi() becomes obsolete and can be removed. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 05:44:31 +0000