summaryrefslogtreecommitdiffstats
path: root/drivers/pci/probe.c
AgeCommit message (Collapse)AuthorFilesLines
2016-08-01Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', ↵Bjorn Helgaas1-0/+18
'pci/pm' and 'pci/virtualization' into next * pci/aspm: PCI/ASPM: Remove redundant check of pcie_set_clkpm * pci/dpc: PCI: Remove DPC tristate module option PCI: Bind DPC to Root Ports as well as Downstream Ports PCI: Fix whitespace in struct dpc_dev PCI: Convert Downstream Port Containment driver to use devm_* functions * pci/hotplug: PCI: Allow additional bus numbers for hotplug bridges * pci/misc: PCI: Include <asm/dma.h> for isa_dma_bridge_buggy PCI: Make bus_attr_resource_alignment static MAINTAINERS: Add file patterns for PCI device tree bindings PCI: Fix comment typo * pci/msi: PCI/MSI: irqchip: Fix PCI_MSI dependencies * pci/pm: PCI: pciehp: Ignore interrupts during D3cold PCI: Document connection between pci_power_t and hardware PM capability PCI: Add runtime PM support for PCIe ports ACPI / hotplug / PCI: Runtime resume bridge before rescan PCI: Power on bridges before scanning new devices PCI: Put PCIe ports into D3 during suspend PCI: Don't clear d3cold_allowed for PCIe ports PCI / PM: Enforce type casting for pci_power_t * pci/virtualization: PCI: Add ACS quirk for Solarflare SFC9220 PCI: Add DMA alias quirk for Adaptec 3805 PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset PCI: Add function 1 DMA alias quirk for Marvell 88SE9182
2016-07-25PCI: Allow additional bus numbers for hotplug bridgesKeith Busch1-0/+9
A user may hot add a switch requiring more than one bus to enumerate. This previously required a system reboot if BIOS did not sufficiently pad the bus resource, which they frequently don't do. Add a kernel parameter so a user can specify the minimum number of bus numbers to reserve for a hotplug bridge's subordinate buses so rebooting won't be necessary. The default is 1, which is equivalent to previous behavior. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-13PCI: Power on bridges before scanning new devicesMika Westerberg1-0/+9
When a PCI device is removed through sysfs interface, the upstream bridge (PCIe port) can be runtime suspended if it was the last device on that bus. Now, if the bridge is in D3 we cannot find devices below the bridge anymore. For example following fails to find the removed device again: # echo 1 > /sys/bus/pci/devices/0000:00:01.0/0000:01:00.0/remove # echo 1 > /sys/bus/pci/devices/0000:00:01.0/rescan Where 0000:00:01.0 is the bridge device. In order to be able to rescan devices below the bridge add pm_runtime_get_sync()/pm_runtime_put() calls to pci_scan_bridge(). This should keep bridges powered on while their children devices are being scanned. Reported-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-10PCI: Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERICTomasz Nowicki1-1/+3
Instead of assigning bus->domain_nr inside pci_bus_assign_domain_nr(), return the domain and let the caller do the assignment. Rename pci_bus_assign_domain_nr() to pci_bus_find_domain_nr() to reflect this. No functional change intended. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2016-05-17Merge branches 'pci/hotplug' and 'pci/resource' into nextBjorn Helgaas1-3/+3
* pci/hotplug: PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit * pci/resource: PCI: Disable all BAR sizing for devices with non-compliant BARs x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs
2016-05-16PCI: Disable all BAR sizing for devices with non-compliant BARsPrarit Bhargava1-3/+3
b84106b4e229 ("PCI: Disable IO/MEM decoding for devices with non-compliant BARs") disabled BAR sizing for BARs 0-5 of devices that don't comply with the PCI spec. But it didn't do anything for expansion ROM BARs, so we still try to size them, resulting in warnings like this on Broadwell-EP: pci 0000:ff:12.0: BAR 6: failed to assign [mem size 0x00000001 pref] Move the non-compliant BAR check from __pci_read_base() up to pci_read_bases() so it applies to the expansion ROM BAR as well as to BARs 0-5. Note that direct callers of __pci_read_base(), like sriov_init(), will now bypass this check. We haven't had reports of devices with broken SR-IOV BARs yet. [bhelgaas: changelog] Fixes: b84106b4e229 ("PCI: Disable IO/MEM decoding for devices with non-compliant BARs") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Andi Kleen <ak@linux.intel.com>
2016-04-11PCI: Add support for multiple DMA aliasesJacek Lawrynowicz1-0/+1
Solve IOMMU support issues with PCIe non-transparent bridges that use Requester ID look-up tables (RID-LUT), e.g., the PEX8733. The NTB connects devices in two independent PCI domains. Devices separated by the NTB are not able to discover each other. A PCI packet being forwared from one domain to another has to have its RID modified so it appears on correct bus and completions are forwarded back to the original domain through the NTB. The RID is translated using a preprogrammed table (LUT) and the PCI packet propagates upstream away from the NTB. If the destination system has IOMMU enabled, the packet will be discarded because the new RID is unknown to the IOMMU. Adding a DMA alias for the new RID allows IOMMU to properly recognize the packet. Each device behind the NTB has a unique RID assigned in the RID-LUT. The current DMA alias implementation supports only a single alias, so it's not possible to support mutiple devices behind the NTB when IOMMU is enabled. Enable all possible aliases on a given bus (256) that are stored in a bitset. Alias devfn is directly translated to a bit number. The bitset is not allocated for devices that have no need for DMA aliases. More details can be found in the following article: http://www.plxtech.com/files/pdf/technical/expresslane/RTC_Enabling%20MulitHostSystemDesigns.pdf Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Joerg Roedel <jroedel@suse.de>
2016-03-15Merge branch 'pci/resource' into nextBjorn Helgaas1-0/+14
* pci/resource: PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: Set ROM shadow location in arch code, not in PCI core PCI: Don't enable/disable ROM BAR if we're using a RAM shadow copy PCI: Don't assign or reassign immutable resources PCI: Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs PCI: Disable IO/MEM decoding for devices with non-compliant BARs
2016-03-15Merge branch 'pci/host-hv' into nextBjorn Helgaas1-0/+15
* pci/host-hv: PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs PCI: Look up IRQ domain by fwnode_handle PCI: Add fwnode_handle to x86 pci_sysdata
2016-03-15Merge branches 'pci/host-altera', 'pci/host-imx6', 'pci/host-keystone', ↵Bjorn Helgaas1-0/+6
'pci/host-rcar', 'pci/host-tegra', 'pci/host-thunder', 'pci/host-vmd', 'pci/host-xilinx' and 'pci/host-xilinx-nwl' into next * pci/host-altera: PCI: altera: Fix altera_pcie_link_is_up() * pci/host-imx6: PCI: imx6: Add DT bindings to configure PHY Tx driver settings * pci/host-keystone: PCI: keystone: Defer probing if devm_phy_get() returns -EPROBE_DEFER * pci/host-rcar: PCI: rcar: Depend on ARCH_RENESAS, not ARCH_SHMOBILE * pci/host-tegra: PCI: tegra: Remove misleading PHYS_OFFSET PCI: tegra: Track bus -> CPU mapping PCI: tegra: Remove unused struct tegra_pcie.num_ports field PCI: tegra: Implement ->{add,remove}_bus() callbacks PCI: Add pci_ops.{add,remove}_bus() callbacks * pci/host-thunder: PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() PCI: generic: Move structure definitions to separate header file * pci/host-vmd: x86/PCI: VMD: Attach VMD resources to parent domain's resource tree x86/PCI: VMD: Set bus resource start to 0 x86/PCI: VMD: Document code for maintainability * pci/host-xilinx: microblaze/PCI: Support generic Xilinx AXI PCIe Host Bridge IP driver PCI: xilinx: Update Zynq binding with Microblaze node PCI: xilinx: Don't call pci_fixup_irqs() on Microblaze PCI: xilinx: Remove dependency on ARM-specific struct hw_pci PCI: xilinx: Use of_pci_get_host_bridge_resources() to parse DT * pci/host-xilinx-nwl: PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller
2016-03-15Merge branches 'pci/aer', 'pci/enumeration', 'pci/kconfig', 'pci/misc', ↵Bjorn Helgaas1-1/+1
'pci/virtualization' and 'pci/vpd' into next * pci/aer: PCI/AER: Log aer_inject error injections PCI/AER: Log actual error causes in aer_inject PCI/AER: Use dev_warn() in aer_inject PCI/AER: Fix aer_inject error codes * pci/enumeration: PCI: Fix broken URL for Dell biosdevname * pci/kconfig: PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Include pci/hotplug Kconfig directly from pci/Kconfig PCI: Include pci/pcie/Kconfig directly from pci/Kconfig * pci/misc: PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: Add QEMU top-level IDs for (sub)vendor & device unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h PCI: Move pci_dma_* helpers to common code frv/PCI: Remove stray pci_{alloc,free}_consistent() declaration * pci/virtualization: PCI: Wait for up to 1000ms after FLR reset PCI: Support SR-IOV on any function type * pci/vpd: PCI: Prevent VPD access for buggy devices PCI: Sleep rather than busy-wait for VPD access completion PCI: Fold struct pci_vpd_pci22 into struct pci_vpd PCI: Rename VPD symbols to remove unnecessary "pci22" PCI: Remove struct pci_vpd_ops.release function pointer PCI: Move pci_vpd_release() from header file to pci/access.c PCI: Move pci_read_vpd() and pci_write_vpd() close to other VPD code PCI: Determine actual VPD size on first access PCI: Use bitfield instead of bool for struct pci_vpd_pci22.busy PCI: Allow access to VPD attributes with size 0 PCI: Update VPD definitions
2016-03-08PCI: Add pci_ops.{add,remove}_bus() callbacksThierry Reding1-0/+6
Add pci_ops.{add,remove}_bus() callbacks, which will be called on every newly created bus and when a bus is being removed, respectively. This can be used by drivers to implement driver-specific initialization and teardown of the bus, in addition to the architecture-specifics implemented by the pcibios_add_bus() and the pcibios_remove_bus() functions. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-29PCI: Rename VPD symbols to remove unnecessary "pci22"Bjorn Helgaas1-1/+1
There's only one kind of VPD, so we don't need to qualify it as "the version described by PCI spec rev 2.2." Rename the following symbols to remove unnecessary "pci22": PCI_VPD_PCI22_SIZE -> PCI_VPD_MAX_SIZE pci_vpd_pci22_size() -> pci_vpd_size() pci_vpd_pci22_wait() -> pci_vpd_wait() pci_vpd_pci22_read() -> pci_vpd_read() pci_vpd_pci22_write() -> pci_vpd_write() pci_vpd_pci22_ops -> pci_vpd_ops pci_vpd_pci22_init() -> pci_vpd_init() Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-25PCI: Disable IO/MEM decoding for devices with non-compliant BARsBjorn Helgaas1-0/+14
The PCI config header (first 64 bytes of each device's config space) is defined by the PCI spec so generic software can identify the device and manage its usage of I/O, memory, and IRQ resources. Some non-spec-compliant devices put registers other than BARs where the BARs should be. When the PCI core sizes these "BARs", the reads and writes it does may have unwanted side effects, and the "BAR" may appear to describe non-sensical address space. Add a flag bit to mark non-compliant devices so we don't touch their BARs. Turn off IO/MEM decoding to prevent the devices from consuming address space, since we can't read the BARs to find out what that address space would be. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Andi Kleen <ak@linux.intel.com> CC: stable@vger.kernel.org
2016-02-16PCI: Look up IRQ domain by fwnode_handleJake Oshins1-0/+15
If pci_host_bridge_msi_domain() can't find an IRQ domain through the OF tree, try to look it up directly through the fwnode_handle. [bhelgaas: changelog] Signed-off-by: Jake Oshins <jakeo@microsoft.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-05PCI: Remove includes of empty asm-generic/pci-bridge.hBjorn Helgaas1-1/+0
include/asm-generic/pci-bridge.h is now empty, so remove every #include of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Will Deacon <will.deacon@arm.com> (arm64)
2016-02-05PCI: Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.hBjorn Helgaas1-0/+7
The PCI flag management constants and functions were previously declared in include/asm-generic/pci-bridge.h. But they are not specific to bridges, and arches did not include pci-bridge.h consistently. Move the following interfaces and related constants to include/linux/pci.h and remove pci-bridge.h: pci_set_flags() pci_add_flags() pci_clear_flags() pci_has_flag() This fixes these warnings when building for some arches: drivers/pci/host/pcie-designware.c:562:20: error: 'PCI_PROBE_ONLY' undeclared (first use in this function) drivers/pci/host/pcie-designware.c:562:7: error: implicit declaration of function 'pci_has_flag' [-Werror=implicit-function-declaration] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-21Merge tag 'pci-v4.5-changes' of ↵Linus Torvalds1-20/+13
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.5 merge window: Enumeration: - Simplify config space size computation (Bjorn Helgaas) - Avoid iterating through ROM outside the resource window (Edward O'Callaghan) - Support PCIe devices with short cfg_size (Jason S. McMullan) - Add Netronome vendor and device IDs (Jason S. McMullan) - Limit config space size for Netronome NFP6000 family (Jason S. McMullan) - Add Netronome NFP4000 PF device ID (Simon Horman) - Limit config space size for Netronome NFP4000 (Simon Horman) - Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management: - Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug: - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) - shpchp: Constify hpc_ops structure (Julia Lawall) - ibmphp: Remove unneeded NULL test (Julia Lawall) Power management: - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI: - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) - Initialize MSI capability for all architectures (Guilherme G. Piccoli) - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver: - Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver: - Hide CONFIG_PCIE_IPROC (Arnd Bergmann) - Do not use 0x in front of %pap (Dmitry V. Krivenok) - Update iProc PCIe device tree binding (Ray Jui) - Add PAXC interface support (Ray Jui) - Add iProc PCIe MSI device tree binding (Ray Jui) - Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver: - Use gpio_set_value_cansleep() (Fabio Estevam) - Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver: - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver: - Export irq_domain_set_info() for module use (Keith Busch) - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) - Use 32 bit PCI domain numbers (Keith Busch) - Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver: - Document PCIe devicetree bindings (Stanimir Varbanov) - Add Qualcomm PCIe controller driver (Stanimir Varbanov) - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver: - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) - Allow DT to override default window settings (Phil Edworthy) - Convert to DT resource parsing API (Phil Edworthy) - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) - Add runtime PM support to pcie-rcar (Phil Edworthy) - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver: - Simplify control flow (Bjorn Helgaas) - Make config accessor override checking symmetric (Bjorn Helgaas) - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous: - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) - Fix all whitespace issues (Bogicevic Sasa) - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) - Use to_pci_dev() instead of open-coding it (Geliang Tang) - Use kobj_to_dev() instead of open-coding it (Geliang Tang) - Use list_for_each_entry() to simplify code (Geliang Tang) - Fix typos in <linux/msi.h> (Thomas Petazzoni) - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)" * tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID x86/PCI: Add driver for Intel Volume Management Device (VMD) PCI/AER: Use 32 bit PCI domain numbers x86/PCI: Allow DMA ops specific to a PCI domain irqdomain: Export irq_domain_set_info() for module use PCI: host: Add of_pci_get_host_bridge_resources() stub genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: designware: Make config accessor override checking symmetric PCI: ibmphp: Remove unneeded NULL test ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: hotplug: Use list_for_each_entry() to simplify code PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers PCI: Avoid iterating through memory outside the resource window PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot ...
2015-12-21acpi: pci: Setup MSI domain for ACPI based pci devicesSuravee Suthikulpanit1-0/+2
This patch introduces pci_msi_register_fwnode_provider() for irqchip to register a callback, to provide a way to determine appropriate MSI domain for a pci device. It also introduces pci_host_bridge_acpi_msi_domain(), which returns the MSI domain of the specified PCI host bridge with DOMAIN_BUS_PCI_MSI bus token. Then, it is assigned to pci device. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-10Merge branches 'pci/aspm', 'pci/hotplug', 'pci/misc' and 'pci/msi' into nextBjorn Helgaas1-20/+13
* pci/aspm: PCI/ASPM: Make sysfs link_state_store() consistent with link_state_show() * pci/hotplug: PCI: pciehp: Always protect pciehp_disable_slot() with hotplug mutex * pci/misc: x86/PCI: Simplify pci_bios_{read,write} PCI: Simplify config space size computation PCI: Limit config space size for Netronome NFP6000 family PCI: Add Netronome vendor and device IDs PCI: Support PCIe devices with short cfg_size x86/PCI: Clarify AMD Fam10h config access restrictions comment PCI: Print warnings for all invalid expansion ROM headers PCI: Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask * pci/msi: PCI/MSI: Remove empty pci_msi_init_pci_dev() PCI/MSI: Initialize MSI capability for all architectures
2015-12-10PCI: Simplify config space size computationBjorn Helgaas1-15/+10
Restructure the logic so we return the config space size as soon as we know it. This reduces indentation, removes negations, and removes gotos. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-30PCI/MSI: Remove empty pci_msi_init_pci_dev()Bjorn Helgaas1-3/+0
4a7cc8316705 ("genirq/MSI: Move msi_list from struct pci_dev to struct device") removed the contents of pci_msi_init_pci_dev(). All implementation of it are now empty, so remove it completely. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-24PCI/MSI: Initialize MSI capability for all architecturesGuilherme G. Piccoli1-3/+4
1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") moved dev->msi_cap and dev->msix_cap initialization from the pci_init_capabilities() path (used on all architectures) to the pci_setup_device() path (not used on Open Firmware architectures). This broke MSI or MSI-X on Open Firmware machines. 4d9aac397a5d ("powerpc/PCI: Disable MSI/MSI-X interrupts at PCI probe time in OF case") fixed it for PowerPC but not for SPARC. Set up MSI and MSI-X (initialize msi_cap and msix_cap and disable MSI and MSI-X) in pci_init_capabilities() so all architectures do it the same way. This reverts 4d9aac397a5d since this patch fixes the problem generically for both PowerPC and SPARC. [bhelgaas: changelog, make pci_msi_setup_pci_dev() static] Fixes: 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-20Merge branches 'acpi-smbus', 'acpi-ec' and 'acpi-pci'Rafael J. Wysocki1-2/+2
* acpi-smbus: Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook" ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code * acpi-ec: ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query() * acpi-pci: PCI: Fix OF logic in pci_dma_configure()
2015-11-20PCI: Fix OF logic in pci_dma_configure()Suravee Suthikulpanit1-2/+2
This patch fixes a bug introduced by previous commit, which incorrectly checkes the of_node of the end-point device. Instead, it should check the of_node of the host bridge. Fixes: 50230713b639 ("PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()") Reported-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-12Merge tag 'pm+acpi-4.4-rc1-2' of ↵Linus Torvalds1-1/+31
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "The only new feature in this batch is support for the ACPI _CCA device configuration object, which it a pre-requisite for future ACPI PCI support on ARM64, but should not affect the other architectures. The rest is fixes and cleanups, mostly in cpufreq (including intel_pstate), the Operating Performace Points (OPP) framework and tools (cpupower and turbostat). Specifics: - Support for the ACPI _CCA configuration object intended to tell the OS whether or not a bus master device supports hardware managed cache coherency and a new set of functions to allow drivers to check the cache coherency support for devices in a platform firmware interface agnostic way (Suravee Suthikulpanit, Jeremy Linton). - ACPI backlight quirks for ESPRIMO Mobile M9410 and Dell XPS L421X (Aaron Lu, Hans de Goede). - Fixes for the arm_big_little and s5pv210-cpufreq cpufreq drivers (Jon Medhurst, Nicolas Pitre). - kfree()-related fixup for the recently introduced CPPC cpufreq frontend (Markus Elfring). - intel_pstate fix reducing kernel log noise on systems where P-states are managed by hardware (Prarit Bhargava). - intel_pstate maintainers information update (Srinivas Pandruvada). - cpufreq core optimization related to the handling of delayed work items used by governors (Viresh Kumar). - Locking fixes and cleanups of the Operating Performance Points (OPP) framework (Viresh Kumar). - Generic power domains framework cleanups (Lina Iyer). - cpupower tool updates (Jacob Tanenbaum, Sriram Raghunathan, Thomas Renninger). - turbostat tool updates (Len Brown)" * tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) PCI: ACPI: Add support for PCI device DMA coherency PCI: OF: Move of_pci_dma_configure() to pci_dma_configure() of/pci: Fix pci_get_host_bridge_device leak device property: ACPI: Remove unused DMA APIs device property: ACPI: Make use of the new DMA Attribute APIs device property: Adding DMA Attribute APIs for Generic Devices ACPI: Adding DMA Attribute APIs for ACPI Device device property: Introducing enum dev_dma_attr ACPI: Honor ACPI _CCA attribute setting cpufreq: CPPC: Delete an unnecessary check before the function call kfree() PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp() PM / OPP: Hold dev_opp_list_lock for writers PM / OPP: Protect updates to list_dev with mutex PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus() cpufreq: s5pv210-cpufreq: fix wrong do_div() usage MAINTAINERS: update for intel P-state driver Creating a common structure initialization pattern for struct option cpupower: Enable disabled Cstates if they are below max latency cpupower: Remove debug message when using cpupower idle-set -D switch cpupower: cpupower monitor reports uninitialized values for offline cpus ...
2015-11-07Merge branch 'acpi-pci'Rafael J. Wysocki1-1/+31
* acpi-pci: PCI: ACPI: Add support for PCI device DMA coherency PCI: OF: Move of_pci_dma_configure() to pci_dma_configure() of/pci: Fix pci_get_host_bridge_device leak device property: ACPI: Remove unused DMA APIs device property: ACPI: Make use of the new DMA Attribute APIs device property: Adding DMA Attribute APIs for Generic Devices ACPI: Adding DMA Attribute APIs for ACPI Device device property: Introducing enum dev_dma_attr ACPI: Honor ACPI _CCA attribute setting Conflicts: drivers/crypto/ccp/ccp-platform.c
2015-11-07PCI: ACPI: Add support for PCI device DMA coherencySuthikulpanit, Suravee1-1/+11
This patch adds support for setting up PCI device DMA coherency from ACPI _CCA object that should normally be specified in the DSDT node of its PCI host bridge. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-07PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()Suthikulpanit, Suravee1-1/+21
This patch move of_pci_dma_configure() to a more generic pci_dma_configure(), which can be extended by non-OF code (e.g. ACPI). This has no functional change. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Acked-by: Rob Herring <robh+dt@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-06Merge tag 'pci-v4.4-changes' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Resource management: - Add support for Enhanced Allocation devices (Sean O. Stalley) - Add Enhanced Allocation register entries (Sean O. Stalley) - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney) - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney) - Handle Enhanced Allocation capability for SR-IOV devices (David Daney) - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas) - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas) - Expand Enhanced Allocation BAR output (Bjorn Helgaas) - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier) - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Add sparc mem64 resource parsing for root bus (Yinghai Lu) PCI device hotplug: - pciehp: Queue power work requests in dedicated function (Guenter Roeck) Driver binding: - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker) Virtualization: - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck) - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck) - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck) - Reorder pcibios_sriov_disable() (Alexander Duyck) - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck) - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck) - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton) - Don't try to restore VF BARs (Wei Yang) MSI: - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel) - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach) - Export all remapped MSIs to sysfs attributes (Romain Bezut) - Disable MSI on SiS 761 (Ondrej Zary) AER: - Clear error status registers during enumeration and restore (Taku Izumi) Generic host bridge driver: - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Allow multiple hosts with different map_bus() methods (David Daney) - Pass starting bus number to pci_scan_root_bus() (David Daney) - Fix address window calculation for non-zero starting bus (David Daney) Altera host bridge driver: - Add msi.h to ARM Kbuild (Ley Foon Tan) - Add Altera PCIe host controller driver (Ley Foon Tan) - Add Altera PCIe MSI driver (Ley Foon Tan) APM X-Gene host bridge driver: - Remove msi_controller assignment (Duc Dang) Broadcom iProc host bridge driver: - Fix header comment "Corporation" misspelling (Florian Fainelli) - Fix code comment to match code (Ray Jui) - Remove unused struct iproc_pcie.irqs[] (Ray Jui) - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui) - Fix PCIe reset logic (Ray Jui) - Improve link detection logic (Ray Jui) - Update PCIe device tree bindings (Ray Jui) - Add outbound mapping support (Ray Jui) Freescale i.MX6 host bridge driver: - Return real error code from imx6_add_pcie_port() (Fabio Estevam) - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam) Freescale Layerscape host bridge driver: - Remove ls_pcie_establish_link() (Minghuan Lian) - Ignore PCIe controllers in Endpoint mode (Minghuan Lian) - Factor out SCFG related function (Minghuan Lian) - Update ls_add_pcie_port() (Minghuan Lian) - Remove unused fields from struct ls_pcie (Minghuan Lian) - Add support for LS1043a and LS2080a (Minghuan Lian) - Add ls_pcie_msi_host_init() (Minghuan Lian) HiSilicon host bridge driver: - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang) Marvell MVEBU host bridge driver: - Return zero for reserved or unimplemented config space (Russell King) - Use exact config access size; don't read/modify/write (Russell King) - Use of_get_available_child_count() (Russell King) - Use for_each_available_child_of_node() to walk child nodes (Russell King) - Report full node name when reporting a DT error (Russell King) - Use port->name rather than "PCIe%d.%d" (Russell King) - Move port parsing and resource claiming to separate function (Russell King) - Fix memory leaks and refcount leaks (Russell King) - Split port parsing and resource claiming from port setup (Russell King) - Use gpio_set_value_cansleep() (Russell King) - Use devm_kcalloc() to allocate an array (Russell King) - Use gpio_desc to carry around gpio (Russell King) - Improve clock/reset handling (Russell King) - Add PCI Express root complex capability block (Russell King) - Remove code restricting accesses to slot 0 (Russell King) NVIDIA Tegra host bridge driver: - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel) Renesas R-Car host bridge driver: - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven) - Build pcie-rcar.c only on ARM (Geert Uytterhoeven) - Make PCI aware of the I/O resources (Phil Edworthy) - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy) - Set root bus nr to that provided in DT (Phil Edworthy) - Fix I/O offset for multiple host bridges (Phil Edworthy) ST Microelectronics SPEAr13xx host bridge driver: - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni) Synopsys DesignWare host bridge driver: - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma) - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni) - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni) - Require config accesses to be naturally aligned (Gabriele Paoloni) - Make "num-lanes" an optional DT property (Gabriele Paoloni) - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni) - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni) - Factor out MSI msg setup (Lucas Stach) - Implement multivector MSI IRQ setup (Lucas Stach) - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach) - Set up high part of MSI target address (Lucas Stach) - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang) - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang) - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang) - Make driver arch-agnostic (Zhou Wang) Miscellaneous: - Make x86 pci_subsys_init() static (Alexander Kuleshov) - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)" * tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: altera: Add Altera PCIe MSI driver PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver PCI: layerscape: Add ls_pcie_msi_host_init() PCI: layerscape: Add support for LS1043a and LS2080a PCI: layerscape: Remove unused fields from struct ls_pcie PCI: layerscape: Update ls_add_pcie_port() PCI: layerscape: Factor out SCFG related function PCI: layerscape: Ignore PCIe controllers in Endpoint mode PCI: layerscape: Remove ls_pcie_establish_link() PCI: designware: Make "clocks" and "clock-names" optional DT properties PCI: designware: Make driver arch-agnostic ARM/PCI: Replace pci_sys_data->align_resource with global function pointer PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT Revert "PCI: designware: Program ATU with untranslated address" PCI: designware: Move calculation of bus addresses to DRA7xx PCI: designware: Make "num-lanes" an optional DT property PCI: designware: Require config accesses to be naturally aligned PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces PCI: designware: Use exact access size in dw_pcie_cfg_read() PCI: spear: Fix dw_pcie_cfg_read/write() usage ...
2015-11-02Merge branches 'pci/aer', 'pci/hotplug', 'pci/misc', 'pci/msi', ↵Bjorn Helgaas1-0/+6
'pci/resource' and 'pci/virtualization' into next * pci/aer: PCI/AER: Clear error status registers during enumeration and restore * pci/hotplug: PCI: pciehp: Queue power work requests in dedicated function * pci/misc: PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum x86/PCI: Make pci_subsys_init() static PCI: Add builtin_pci_driver() to avoid registration boilerplate PCI: Remove unnecessary "if" statement * pci/msi: x86/PCI: Don't alloc pcibios-irq when MSI is enabled PCI/MSI: Export all remapped MSIs to sysfs attributes PCI: Disable MSI on SiS 761 * pci/resource: sparc/PCI: Add mem64 resource parsing for root bus PCI: Expand Enhanced Allocation BAR output PCI: Make Enhanced Allocation bitmasks more obvious PCI: Handle Enhanced Allocation capability for SR-IOV devices PCI: Add support for Enhanced Allocation devices PCI: Add Enhanced Allocation register entries PCI: Handle IORESOURCE_PCI_FIXED when assigning resources PCI: Handle IORESOURCE_PCI_FIXED when sizing resources PCI: Clear IORESOURCE_UNSET when reverting to firmware-assigned address * pci/virtualization: PCI: Fix sriov_enable() error path for pcibios_enable_sriov() failures PCI: Wait 1 second between disabling VFs and clearing NumVFs PCI: Reorder pcibios_sriov_disable() PCI: Remove VFs in reverse order if virtfn_add() fails PCI: Remove redundant validation of SR-IOV offset/stride registers PCI: Set SR-IOV NumVFs to zero after enumeration PCI: Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs PCI: Don't try to restore VF BARs
2015-10-29PCI: Add support for Enhanced Allocation devicesSean O. Stalley1-0/+3
Add support for devices using Enhanced Allocation entries instead of BARs. This allows the kernel to parse the EA Extended Capability structure in PCI config space and claim the BAR-equivalent resources. See https://pcisig.com/sites/default/files/specification_documents/ECN_Enhanced_Allocation_23_Oct_2014_Final.pdf [bhelgaas: add spec URL, s/pci_ea_set_flags/pci_ea_flags/, consolidate declarations, print unknown property in hex to match spec] Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> [david.daney@cavium.com: Add more support/checking for Entry Properties, allow EA behind bridges, rewrite some error messages.] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-16PCI/MSI: Allow the MSI domain to be device-specificMarc Zyngier1-0/+8
So far, we've always considered that for a given PCI device, its MSI controller was either set by the architecture-specific pcibios hook, or simply inherited from the host bridge. This doesn't cover things like firmware-defined topologies like msi-map (DT) or IORT (ACPI), which can provide information about which MSI controller to use on a per-device basis. This patch adds the necessary hook into the MSI code to allow this feature, and provides the msi-map functionnality as a first implementation. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-16PCI: Add per-device MSI domain hookMarc Zyngier1-5/+30
So far, we have considered that the MSI domain for a device was either set via the architecture-dependent pcibios implementation or inherited from the host bridge. As we're about to break that assumption, add pci_dev_msi_domain which is the equivalent of pci_host_bridge_msi_domain, but for a single device. Other than moving things around a bit, this patch on its own has no effect. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-24PCI/MSI: Fix MSI IRQ domains for VFs on virtual busesAlex Williamson1-6/+11
SR-IOV creates a virtual bus where bus->self is NULL. When we add VFs and scan for an MSI domain, pci_set_bus_msi_domain() dereferences bus->self, which causes a kernel NULL pointer dereference oops. Scan up to the parent bus until we find a real bridge where we can get the MSI domain. [bhelgaas: changelog] Fixes: 44aa0c657e3e ("PCI/MSI: Add hooks to populate the msi_domain field") Tested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-17PCI/AER: Clear error status registers during enumeration and restoreTaku Izumi1-0/+3
AER errors might be recorded when powering-on devices. These errors can be ignored, so firmware usually clears them before the OS enumerates devices. However, firmware is not involved when devices are added via hotplug, so the OS may discover power-up errors that should be ignored. The same may happen when powering up devices when resuming after suspend. Clear the AER error status registers during enumeration and resume. [bhelgaas: changelog, remove repetitive comments] Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-09-15PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"Bjorn Helgaas1-6/+0
Revert dff22d2054b5 ("PCI: Call pci_read_bridge_bases() from core instead of arch code"). Reading PCI bridge windows is not arch-specific in itself, but there is PCI core code that doesn't work correctly if we read them too early. For example, Hannes found this case on an ARM Freescale i.mx6 board: pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window) pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100] The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs 0x204100 of space, and mem windows are megabyte-aligned. Bus sizing can increase a bridge window size, but never *decrease* it (see d65245c3297a ("PCI: don't shrink bridge resources")). Prior to dff22d2054b5, ARM didn't read bridge windows at all, so the "original size" was zero, and we assigned a 3MB window. After dff22d2054b5, we read the bridge windows before sizing the bus. The firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since we never decrease the size, we kept 16MB even though we only needed 3MB. But 16MB doesn't fit in the host bridge aperture, so we failed to assign space for the window and the downstream devices. I think this is a defect in the PCI core: we shouldn't rely on the firmware to assign sensible windows. Ray reported a similar problem, also on ARM, with Broadcom iProc. Issues like this are too hard to fix right now, so revert dff22d2054b5. Reported-by: Hannes <oe5hpm@gmail.com> Reported-by: Ray Jui <rjui@broadcom.com> Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-09-08Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
2015-09-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-0/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
2015-08-31Merge tag 'pci-v4.3-changes' of ↵Linus Torvalds1-27/+65
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.3 merge window: Enumeration: - Allocate ATS struct during enumeration (Bjorn Helgaas) - Embed ATS info directly into struct pci_dev (Bjorn Helgaas) - Reduce size of ATS structure elements (Bjorn Helgaas) - Stop caching ATS Invalidate Queue Depth (Bjorn Helgaas) - iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth (Bjorn Helgaas) - Move MPS configuration check to pci_configure_device() (Bjorn Helgaas) - Set MPS to match upstream bridge (Keith Busch) - ARM/PCI: Set MPS before pci_bus_add_devices() (Murali Karicheri) - Add pci_scan_root_bus_msi() (Lorenzo Pieralisi) - ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() (Lorenzo Pieralisi) Resource management: - Call pci_read_bridge_bases() from core instead of arch code (Lorenzo Pieralisi) PCI device hotplug: - pciehp: Remove unused interrupt events (Bjorn Helgaas) - pciehp: Remove ignored MRL sensor interrupt events (Bjorn Helgaas) - pciehp: Handle invalid data when reading from non-existent devices (Jarod Wilson) - pciehp: Simplify pcie_poll_cmd() (Yijing Wang) - Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot (Yijing Wang) - Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem (Yijing Wang) - Hold pci_slot_mutex while searching bus->slots list (Yijing Wang) Power management: - Disable async suspend/resume for JMicron multi-function SATA/AHCI (Zhang Rui) Virtualization: - Add ACS quirks for Intel I219-LM/V (Alex Williamson) - Restore ACS configuration as part of pci_restore_state() (Alexander Duyck) MSI: - Add pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu) - x86: Implement pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu) - Add helpers to manage pci_dev->irq and pci_dev->irq_managed (Jiang Liu) - Free legacy IRQ when enabling MSI/MSI-X (Jiang Liu) - ARM/PCI: Remove msi_controller from struct pci_sys_data (Lorenzo Pieralisi) - Remove unused pcibios_msi_controller() hook (Lorenzo Pieralisi) Generic host bridge driver: - Remove dependency on ARM-specific struct hw_pci (Jayachandran C) - Build setup-irq.o for arm64 (Jayachandran C) - Add arm64 support (Jayachandran C) APM X-Gene host bridge driver: - Add APM X-Gene PCIe 64-bit prefetchable window (Duc Dang) - Add support for a 64-bit prefetchable memory window (Duc Dang) - Drop owner assignment from platform_driver (Krzysztof Kozlowski) Broadcom iProc host bridge driver: - Allow BCMA bus driver to be built as module (Hauke Mehrtens) - Delete unnecessary checks before phy calls (Markus Elfring) - Add arm64 support (Ray Jui) Synopsys DesignWare host bridge driver: - Don't complain missing *config* reg space if va_cfg0 is set (Murali Karicheri) TI DRA7xx host bridge driver: - Disable pm_runtime on get_sync failure (Kishon Vijay Abraham I) - Add PM support (Kishon Vijay Abraham I) - Clear MSE bit during suspend so clocks will idle (Kishon Vijay Abraham I) - Add support to make GPIO drive PERST# line (Kishon Vijay Abraham I) Xilinx AXI host bridge driver: - Check for MSI interrupt flag before handling as INTx (Russell Joyce) Miscellaneous: - Fix Intersil/Techwell TW686[4589] AV capture class code (Krzysztof Hałasa) - Use PCI_CLASS_SERIAL_USB instead of bare number (Bjorn Helgaas) - Fix generic NCR 53c810 class code quirk (Bjorn Helgaas) - Fix TI816X class code quirk (Bjorn Helgaas) - Remove unused "pci_probe" flags (Bjorn Helgaas) - Host bridge driver code simplifications (Fabio Estevam) - Add dev_flags bit to access VPD through function 0 (Mark Rustad) - Add VPD function 0 quirk for Intel Ethernet devices (Mark Rustad) - Kill off set_irq_flags() usage (Rob Herring) - Remove Intel Cherrytrail D3 delays (Srinidhi Kasagar) - Clean up pci_find_capability() (Wei Yang)" * tag 'pci-v4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (72 commits) PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci PCI: imx6: Simplify a trivial if-return sequence PCI: spear: Use BUG_ON() instead of condition followed by BUG() PCI: dra7xx: Remove unneeded use of IS_ERR_VALUE() PCI: Remove pci_ats_enabled() PCI: Stop caching ATS Invalidate Queue Depth PCI: Move ATS declarations to linux/pci.h so they're all together PCI: Clean up ATS error handling PCI: Use pci_physfn() rather than looking up physfn by hand ...
2015-08-28Merge branches 'pci/enumeration' and 'pci/misc' into nextBjorn Helgaas1-21/+54
* pci/enumeration: PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci ARM/PCI: Set MPS before pci_bus_add_devices() * pci/misc: PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
2015-08-26PCI: Make pci_msi_setup_pci_dev() non-static for use by arch codeGuilherme G. Piccoli1-1/+1
Commit 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") changed the location of the code that initialises dev->msi_cap/msix_cap and then disables MSI/MSI-X interrupts at PCI probe time in devices that have this flag set. It moved the code from pci_msi_init_pci_dev() to a new function named pci_msi_setup_pci_dev(), called by pci_setup_device(). The pseries PCI probing code does not call pci_setup_device(), so since the aforementioned commit the function pci_msi_setup_pci_dev() is not called and MSI/MSI-X interrupts are left enabled. Additionally because dev->msi_cap/msix_cap are not initialised no driver can ever enable MSI/MSI-X. To fix this, the pseries PCI probe should manually call pci_msi_setup_pci_dev(), so this patch makes it non-static. Fixes: 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") [mpe: Update change log to mention dev->msi_cap/msix_cap] Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-24PCI: Set MPS to match upstream bridgeKeith Busch1-2/+20
Firmware typically configures the PCIe fabric with a consistent Max Payload Size setting based on the devices present at boot. A hot-added device typically has the power-on default MPS setting (128 bytes), which may not match the fabric. The previous Linux default, in the absence of any "pci=pcie_bus_*" options, was PCIE_BUS_TUNE_OFF, in which we never touch MPS, even for hot-added devices. Add a new default setting, PCIE_BUS_DEFAULT, in which we make sure every device's MPS setting matches the upstream bridge. This makes it more likely that a hot-added device will work in a system with optimized MPS configuration. Note that if we hot-add a device that only supports 128-byte MPS, it still likely won't work because we don't reconfigure the rest of the fabric. Booting with "pci=pcie_bus_peer2peer" is a workaround for this because it sets MPS to 128 for everything. [bhelgaas: changelog, new default, rework for pci_configure_device() path] Tested-by: Keith Busch <keith.busch@intel.com> Tested-by: Jordan Hargrave <jharg93@gmail.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2015-08-20PCI: Move MPS configuration check to pci_configure_device()Bjorn Helgaas1-19/+24
Previously we checked for invalid MPS settings, i.e., a device with MPS different than its upstream bridge, in pcie_bus_detect_mps(). We only did this if the arch or hotplug driver called pcie_bus_configure_settings(), and then only if PCIe bus tuning was disabled (PCIE_BUS_TUNE_OFF). Move the MPS checking code to pci_configure_device(), so we do it in the pci_device_add() path for every device. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-20PCI: Add pci_scan_root_bus_msi()Lorenzo Pieralisi1-2/+12
Add a pci_scan_root_bus_msi() interface so an arch can specify the MSI controller up front. This removes the need for a pcibios callback to set the MSI controller later. This is not exported because I'd like to replace the variety of "scan root bus" interfaces with a single, more extensible interface that can handle the MSI controller, domain, pci_ops, resources, etc. I hope this interface is temporary. [bhelgaas: changelog, split into separate patch] Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
2015-08-19PCI: Tolerate hierarchies with no Root PortYijing Wang1-1/+6
We should not assume any particular hardware topology. Commit d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") relied on the assumption that every PCIe hierarchy is rooted at a Root Port. But we can't rely on any assumption about what hardware we will find; we just have to deal with the world as it is. On some platforms, PCIe devices (endpoints, switch upstream ports, etc.) appear directly on the root bus, and there is no Root Port in the PCI bus hierarchy. For example, Meelis observed these top-level devices on a Sparc V245: 0000:02:00.0 PCI bridge to [bus 03-0d] Switch Upstream Port 0001:02:00.0 PCI bridge to [bus 03] PCIe to PCI/PCI-X Bridge These devices *look* like they have links going upstream, but there really are no upstream devices. In set_pcie_port_type(), we used the parent device to figure out which side of a switch port has a link, so if the parent device did not exist, we dereferenced a NULL parent pointer. Check whether the parent device exists before dereferencing it. Meelis observed this oops on Sparc V245 and T2000. Ben Herrenschmidt says this is also possible on IBM PowerVM guests on PowerPC. [bhelgaas: changelog, comment] Link: http://lkml.kernel.org/r/alpine.LRH.2.20.1508122118210.18637@math.ut.ee Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net>
2015-08-14Merge branches 'pci/hotplug', 'pci/iommu', 'pci/irq' and ↵Bjorn Helgaas1-5/+4
'pci/virtualization' into next * pci/hotplug: PCI: pciehp: Remove ignored MRL sensor interrupt events PCI: pciehp: Remove unused interrupt events PCI: pciehp: Handle invalid data when reading from non-existent devices PCI: Hold pci_slot_mutex while searching bus->slots list PCI: Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem PCI: pciehp: Simplify pcie_poll_cmd() PCI: Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot * pci/iommu: PCI: Remove pci_ats_enabled() PCI: Stop caching ATS Invalidate Queue Depth PCI: Move ATS declarations to linux/pci.h so they're all together PCI: Clean up ATS error handling PCI: Use pci_physfn() rather than looking up physfn by hand PCI: Inline the ATS setup code into pci_ats_init() PCI: Rationalize pci_ats_queue_depth() error checking PCI: Reduce size of ATS structure elements PCI: Embed ATS info directly into struct pci_dev PCI: Allocate ATS struct during enumeration iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth * pci/irq: PCI: Kill off set_irq_flags() usage * pci/virtualization: PCI: Add ACS quirks for Intel I219-LM/V
2015-08-13PCI: Allocate ATS struct during enumerationBjorn Helgaas1-0/+3
Previously, we allocated pci_ats structures when an IOMMU driver called pci_enable_ats(). An SR-IOV VF shares the STU setting with its PF, so when enabling ATS on the VF, we allocated a pci_ats struct for the PF if it didn't already have one. We held the sriov->lock to serialize threads concurrently enabling ATS on several VFS so only one would allocate the PF pci_ats. Gregor reported a deadlock here: pci_enable_sriov sriov_enable virtfn_add mutex_lock(dev->sriov->lock) # acquire sriov->lock pci_device_add device_add BUS_NOTIFY_ADD_DEVICE notifier chain iommu_bus_notifier amd_iommu_add_device # iommu_ops.add_device init_iommu_group iommu_group_get_for_dev iommu_group_add_device __iommu_attach_device amd_iommu_attach_device # iommu_ops.attach_device attach_device pci_enable_ats mutex_lock(dev->sriov->lock) # deadlock There's no reason to delay allocating the pci_ats struct, and if we allocate it for each device at enumeration-time, there's no need for locking in pci_enable_ats(). Allocate pci_ats struct during enumeration, when we initialize other capabilities. Note that this implementation requires ATS to be enabled on the PF first, before on any of the VFs because the PF controls the STU for all the VFs. Link: http://permalink.gmane.org/gmane.linux.kernel.iommu/9433 Reported-by: Gregor Dick <gdick@solarflare.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-10cleanup IORESOURCE_CACHEABLE vs ioremap()Dan Williams1-2/+1
Quoting Arnd: I was thinking the opposite approach and basically removing all uses of IORESOURCE_CACHEABLE from the kernel. There are only a handful of them.and we can probably replace them all with hardcoded ioremap_cached() calls in the cases they are actually useful. All existing usages of IORESOURCE_CACHEABLE call ioremap() instead of ioremap_nocache() if the resource is cacheable, however ioremap() is uncached by default. Clearly none of the existing usages care about the cacheability. Particularly devm_ioremap_resource() never worked as advertised since it always fell back to plain ioremap(). Clean this up as the new direction we want is to convert ioremap_<type>() usages to memremap(..., flags). Suggested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-04Merge branches 'pci/irq', 'pci/misc', 'pci/resource' and ↵Bjorn Helgaas1-1/+7
'pci/virtualization' into next * pci/irq: PCI/MSI: Free legacy IRQ when enabling MSI/MSI-X PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq() PCI: Add pcibios_alloc_irq() and pcibios_free_irq() * pci/misc: PCI: Remove unused "pci_probe" flags PCI: Add VPD function 0 quirk for Intel Ethernet devices PCI: Add dev_flags bit to access VPD through function 0 PCI / ACPI: Fix pci_acpi_optimize_delay() comment PCI: Remove a broken link in quirks.c PCI: Remove useless redundant code PCI: Simplify pci_find_(ext_)capability() return value checks PCI: Move PCI_FIND_CAP_TTL to pci.h and use it in quirks PCI: Add pcie_downstream_port() (true for Root and Switch Downstream Ports) PCI: Fix pcie_port_device_resume() comment PCI: Shift PCI_CLASS_NOT_DEFINED consistently with other classes PCI: Revert aeb30016fec3 ("PCI: add Intel USB specific reset method") PCI: Fix TI816X class code quirk PCI: Fix generic NCR 53c810 class code quirk PCI: Use PCI_CLASS_SERIAL_USB instead of bare number PCI: Add quirk for Intersil/Techwell TW686[4589] AV capture cards PCI: Remove Intel Cherrytrail D3 delays * pci/resource: PCI: Call pci_read_bridge_bases() from core instead of arch code * pci/virtualization: PCI: Restore ACS configuration as part of pci_restore_state()
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 22:14:50 +0000