summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pcie
AgeCommit message (Collapse)AuthorFilesLines
2018-06-11PCI/AER: Use "PCI Express" consistently in Kconfig textBjorn Helgaas1-6/+6
Use "PCI Express" consistently in Kconfig text. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11PCI/AER: Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/Bjorn Helgaas6-56/+41
Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/ so they're next to other PCIe service drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11PCI/AER: Squash Kconfig.debug into KconfigBjorn Helgaas2-21/+14
Squash Kconfig.debug into Kconfig. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11PCI/AER: Move private AER things to aerdrv.cBjorn Helgaas2-80/+63
Most of the things in aerdrv.h are only used in aerdrv.c, so move them there. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11PCI/AER: Move aer_irq() declaration to portdrv.hBjorn Helgaas3-3/+6
The aer_irq() declaration is the only thing needed by aer_inject.c. Move it to portdrv.h so we eventually get rid of aerdrv.h completely. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11PCI/AER: Move pcie_aer_get_firmware_first() to portdrv.hBjorn Helgaas3-11/+11
Move pcie_aer_get_firmware_first() to portdrv.h, where it can be more easily shared between AER and DPC. Then DPC no longer needs to include aer/aerdrv.h. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11PCI/AER: Remove duplicate pcie_port_bus_type declarationBjorn Helgaas1-1/+0
pcie_port_bus_type is already declared in portdrv.h, so remove the unnecessary duplicate declaration in aerdrv.h. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11PCI/AER: Squash ecrc.c into aerdrv.cBjorn Helgaas3-119/+110
Squash ecrc.c into aerdrv.c. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11PCI/AER: Squash aerdrv_acpi.c into aerdrv.cBjorn Helgaas3-142/+122
Squash aerdrv_acpi.c into aerdrv.c. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11PCI/AER: Squash aerdrv_errprint.c into aerdrv.cBjorn Helgaas4-263/+244
Squash aerdrv_errprint.c into aerdrv.c. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11PCI/AER: Squash aerdrv_core.c into aerdrv.cBjorn Helgaas4-498/+475
Squash aerdrv_core.c into aerdrv.c. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-11PCI/AER: Reorder code to group probe/remove stuff togetherBjorn Helgaas1-58/+58
Reorder code to group probe/remove stuff together. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-08PCI/AER: Remove forward declarationsBjorn Helgaas1-16/+11
Reorder code to remove forward declarations. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-06Merge branch 'pci/portdrv'Bjorn Helgaas1-57/+0
- remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) * pci/portdrv: PCI/portdrv: Remove unused pcie_port_acpi_setup()
2018-06-06Merge branch 'pci/hotplug'Bjorn Helgaas2-3/+1
- fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) * pci/hotplug: PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: shpchp: Use dev_printk() for OSHP-related messages PCI: shpchp: Remove get_hp_hw_control_from_firmware() wrapper PCI: shpchp: Remove acpi_get_hp_hw_control_from_firmware() flags PCI: shpchp: Rely on previous _OSC results PCI: shpchp: Request SHPC control via _OSC when adding host bridge PCI: shpchp: Convert SHPC to be builtin only PCI: pciehp: Make pciehp_is_native() stricter PCI: pciehp: Rename host->native_hotplug to host->native_pcie_hotplug PCI: pciehp: Request control of native hotplug only if supported PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume PCI: pnv_php: Add missing of_node_put() PCI: pciehp: Add quirk for Command Completed errata PCI: Add Qualcomm vendor ID PCI: ibmphp: Fix use-before-set in get_max_bus_speed() # Conflicts: # drivers/acpi/pci_root.c
2018-06-06Merge branch 'pci/dpc'Bjorn Helgaas1-1/+4
- clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) * pci/dpc: PCI/DPC: Clear interrupt status in interrupt handler top half
2018-06-06Merge branch 'pci/aspm'Bjorn Helgaas1-0/+9
- disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) * pci/aspm: PCI/ACPI: Request LTR control from platform before using it PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR
2018-06-05PCI/AER: Replace struct pcie_device with pci_devKeith Busch3-14/+12
The AER driver only needed the pcie_device to get to the port pci_dev. Save the pci_dev pointer directly in struct aer_rpc and remove the unnecessary indirection. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-05PCI/AER: Remove unused parametersKeith Busch1-9/+5
Remove unused "struct pcie_device *" parameters to handle_error_source() and aer_process_err_devices(). No functional change intended. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-02PCI/AER: Decode Error Source Requester IDBjorn Helgaas1-7/+11
Decode the Requester ID from the AER Error Source Register into domain/ bus/device/function format to match other logging. In cases where the ID matches the device used for pci_err(), drop the extra ID completely so we don't print it twice. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-02PCI/AER: Remove aer_recover_work_func() forward declarationBorislav Petkov1-24/+24
Just move the actual function up so that it is visible to its user aer_recover_queue(). No functional changes. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-02PCI/DPC: Use the generic pcie_do_fatal_recovery() pathOza Pawandeep1-20/+33
Our goal is to handle ERR_FATAL errors similarly, whether they are reported via AER or via DPC. A previous commit changed AER so it handles ERR_FATAL by calling driver .remove() methods and resetting the Link. DPC already does that (although the Link reset is done automatically by hardware and happens before we call the driver .remove() methods). Restructure the DPC code so it calls the same pcie_do_fatal_recovery() interface used by AER. This makes it clearer that we want to use the same path. Implement the .reset_link() method used by pcie_do_fatal_recovery(). For DPC, the actual reset is done automatically by hardware, so we really only have to wait for the Link to be inactive, then release the Port from DPC. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, DPC_FATAL is not a bitfield, can be sequential] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-02PCI/AER: Pass service type to pcie_do_fatal_recovery()Oza Pawandeep2-7/+8
Pass the service type to pcie_do_fatal_recovery() instead of assuming AER. We will make DPC also use pcie_do_fatal_recovery(), and it needs to do things a little differently for AER and DPC. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-02PCI/DPC: Disable ERR_NONFATAL handling by DPCOza Pawandeep1-2/+2
PCIe ERR_NONFATAL errors mean a particular transaction is unreliable but the Link is otherwise fully functional (PCIe r4.0, sec 6.2.2). The AER driver handles these by logging the error details and calling driver-supplied pci_error_handlers callbacks. It does not reset downstream devices, does not remove them from the PCI subsystem, does not re-enumerate them, and does not call their driver .remove() or .probe() methods. But DPC driver previously enabled DPC on ERR_NONFATAL, so if the hardware supports DPC, these errors caused a Link reset (performed automatically by the hardware), followed by the DPC driver removing affected devices (which calls their .remove() methods), bringing the Link back up, and re-enumerating (which calls driver .probe() methods). Disable ERR_NONFATAL DPC triggering so these errors will only be handled by AER. This means drivers won't have to deal with different usage of their pci_error_handlers callbacks and .probe() and .remove() methods based on whether the platform has DPC support. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-02PCI/portdrv: Add generic pcie_port_find_device()Oza Pawandeep2-0/+24
Add generic pcie_port_find_device() routine. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-06-02PCI: pciehp: Make pciehp_is_native() stricterMika Westerberg1-2/+0
Previously pciehp_is_native() returned true for any PCI device in a hierarchy where _OSC says we can use pciehp. This is incorrect because bridges without PCI_EXP_SLTCAP_HPC capability should be managed by acpiphp instead. Improve pciehp_is_native() to return true only when PCI_EXP_SLTCAP_HPC is set and the pciehp driver is present. In any other case return false to let acpiphp handle those. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: remove NULL pointer check] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-02PCI: pciehp: Rename host->native_hotplug to host->native_pcie_hotplugMika Westerberg1-1/+1
Rename host->native_hotplug to host->native_pcie_hotplug to make room for a similar flag for SHPC hotplug. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-17PCI/portdrv: Add generic pcie_port_find_service()Oza Pawandeep4-30/+49
Add generic pcie_port_find_service() routine. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-05-17PCI/AER: Factor out error reporting to drivers/pci/pcie/err.cOza Pawandeep5-364/+392
Move the error reporting callbacks from aerdrv_core.c to err.c, where they can be used by DPC in addition to AER. As part of aerdrv_core.c, these callbacks were built under CONFIG_PCIEAER. Moving them to the new err.c means they will now be built under CONFIG_PCIEPORTBUS, so adjust the definition of pci_uevent_ers() to match. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: in reset_link(), initialize "driver" even if CONFIG_PCIEAER is unset, update pci_uevent_ers() #ifdef wrapper] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-17PCI/AER: Rename error recovery interfaces to generic PCI namingOza Pawandeep1-8/+8
Rename error recovery interfaces with "pcie_" prefix so they can be made non-static. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: move declaration to later patch, leave functions static] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-05-17PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devicesOza Pawandeep2-23/+71
PCIe ERR_FATAL errors mean the Link is unreliable. Components on the Link may need to be reset to return to reliable operation (PCIe r4.0, sec 6.2.2). We previously handled these errors much differently depending on whether the platform supports Downstream Port Containment (DPC) (PCIe r4.0, sec 6.2.10) or not. The AER driver has historically logged the error details, called driver-supplied pci_error_handlers callbacks, and reset the Link. This reset downstream devices, but did not remove them from the PCI subsystem, re-enumerate them, or call their driver .remove() or .probe() methods. DPC is different because the hardware automatically disables the Link when it detects ERR_FATAL, which resets downstream devices. There's no opportunity for pci_error_handlers callbacks before resetting the Link. The DPC driver removes affected devices (which calls their driver .remove() methods), brings the Link back up, and re-enumerates (which calls driver .probe() methods). Align AER ERR_FATAL handling with DPC by resetting the Link in software, skipping the driver pci_error_handlers callbacks, removing the devices from the PCI subsystem, and re-enumerating. The idea is that drivers and devices should see the same behavior for ERR_FATAL events, regardless of whether they're handled by AER or DPC. Here are the basic ERR_FATAL recovery steps, showing the previous AER behavior, the AER behavior after this patch, and the DPC behavior: AER AER DPC previous new behavior -------- --- -------- Log error yes yes yes (minimal) drv.error_detected() yes no no Reset Link yes yes yes drv.mmio_enabled() yes no no drv.slot_reset() yes no no drv.resume() yes no no Remove PCI devices no yes yes (calls drv.remove()) Re-enumerate no yes yes (calls drv.probe()) N.B. With DPC, the Link reset happens before the driver .remove() calls, while with AER, the reset happens *after* the .remove() calls. The goal is to eventually do the reset before .remove() for AER as well. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, squash doc patch into this, remove unused "result_data"] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-05-17PCI: Add generic pcie_wait_for_link() interfaceOza Pawandeep1-11/+1
Clients such as hotplug and Downstream Port Containment (DPC) both need to wait until a link becomes active or inactive. Add a generic pcie_wait_link_active() interface and use it instead of duplicating the code. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-05-16PCI/DPC: Clear interrupt status in interrupt handler top halfOza Pawandeep1-1/+4
The generic IRQ handling code ensures that an interrupt handler runs with its interrupt masked or disabled. If the interrupt is level-triggered, the interrupt handler must tell its device to stop asserting the interrupt before returning. If it doesn't, we will immediately take the interrupt again when the handler returns and the generic code unmasks the interrupt. The driver doesn't know whether its interrupt is edge- or level-triggered, so it must clear its interrupt source directly in its interrupt handler. Previously we cleared the DPC interrupt status in the bottom half, i.e., in deferred work, which can cause an interrupt storm if the DPC interrupt happens to be level-triggered, e.g., if we're using INTx instead of MSI. Clear the DPC interrupt status bit in the interrupt handler, not in the deferred work. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-05-10PCI/AER: Add TLP header information to tracepointThomas Tai1-2/+2
When a PCIe AER error occurs, the TLP header information is printed in the kernel message but it is missing from the tracepoint. A userspace program can use this information in the tracepoint to better analyze problems. To enable the tracepoint: echo 1 > /sys/kernel/debug/tracing/events/ras/aer_event/enable Example tracepoint output: $ cat /sys/kernel/debug/tracing/trace aer_event: 0000:01:00.0 PCIe Bus Error: severity=Uncorrected, non-fatal, Completer Abort TLP Header={0x0,0x1,0x2,0x3} Signed-off-by: Thomas Tai <thomas.tai@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-05-07PCI/AER: Unify error bit printing for native and CPER reportingAlexandru Gagniuc1-7/+9
AER errors can be reported natively (Linux AER driver fields interrupts and reads error state directly from hardware) or via the ACPI/APEI/GHES/CPER path (platform firmware reads error state from hardware and sends it to Linux via ACPI interfaces). Previously the same error would produce different output depending on whether it was reported natively or via ACPI. The CPER path resulted in hard-to-understand messages, without a prefix. Instead use __aer_print_error() for both native AER and CPER to provide a more consistent log format. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-02PCI/portdrv: Remove unused pcie_port_acpi_setup()Bjorn Helgaas1-57/+0
02bfeb484230 ("PCI/portdrv: Simplify PCIe feature permission checking") removed the only call of pcie_port_acpi_setup() and removed portdrv_acpi.o from the Makefile, but I forgot to remove pcie_port_acpi_setup() itself. Remove pcie_port_acpi_setup() and the drivers/pci/pcie/portdrv_acpi.c file. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-18PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTRBjorn Helgaas1-0/+9
When in the ASPM L1.0 state (but not the PCI-PM L1.0 state), the most recent LTR value and the LTR_L1.2_THRESHOLD determines whether the link enters the L1.2 substate. If we don't have LTR enabled, prevent the use of ASPM L1.2. PCI-PM L1.2 may still be used because it doesn't depend on LTR_L1.2_THRESHOLD (see PCIe r4.0, sec 5.5.1). Tested-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-04Merge branch 'pci/portdrv'Bjorn Helgaas12-195/+115
- move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) * pci/portdrv: PCI/DPC: Rename from pcie-dpc.c to dpc.c PCI/DPC: Do not enable DPC if AER control is not allowed by the BIOS PCI/AER: Use cached AER Capability offset PCI/portdrv: Rename and reverse sense of pcie_ports_auto PCI/portdrv: Encapsulate pcie_ports_auto inside the port driver PCI/portdrv: Remove unnecessary "pcie_ports=auto" parameter PCI/portdrv: Remove "pcie_hp=nomsi" kernel parameter PCI/portdrv: Remove unnecessary include of <linux/pci-aspm.h> PCI/portdrv: Simplify PCIe feature permission checking PCI/portdrv: Remove unused PCIE_PORT_SERVICE_VC PCI/portdrv: Remove pcie_port_bus_type link order dependency PCI/portdrv: Disable port driver in compat mode PCI/PM: Clear PCIe PME Status bit for Root Complex Event Collectors PCI/PM: Clear PCIe PME Status bit in core, not PCIe port driver PCI/PM: Move pcie_clear_root_pme_status() to core PCI/portdrv: Merge pcieport_if.h into portdrv.h PCI/portdrv: Move pcieport_if.h to drivers/pci/pcie/ Conflicts: drivers/pci/pcie/Makefile drivers/pci/pcie/portdrv.h
2018-04-04Merge branch 'pci/misc'Bjorn Helgaas11-37/+15
- use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) * pci/misc: PCI: Always define the of_node helpers PCI: Tidy comments PCI: Tidy Makefiles mcb: Add Altera PCI ID to mcb-pci PCI: Add Altera vendor ID PCI: Report quirks that take more than 10ms PCI: Report quirk timings with pci_info() instead of pr_debug() PCI: Fix NULL pointer dereference in of_pci_bus_find_domain_nr() rapidio/tsi721: use PCI_EXP_DEVCTL2_COMP_TIMEOUT macro
2018-03-31PCI/DPC: Rename from pcie-dpc.c to dpc.cBjorn Helgaas2-1/+1
Rename pcie-dpc.c to dpc.c. The path "drivers/pci/pcie/pcie-dpc.c" has more occurrences of "pci" than necessary. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-30PCI/DPC: Do not enable DPC if AER control is not allowed by the BIOSMika Westerberg2-3/+3
Commit eed85ff4c0da ("PCI/DPC: Enable DPC only if AER is available") made DPC control dependent whether AER is enabled in the OS. However, it does not take into account situations where BIOS has not given OS control of AER: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC: platform does not support [AER] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] I think here it is better not to enable DPC even if the capability is available because then it would be against what "Determination of DPC Control" note in PCIe 4.0 sec 6.1.10 recommends. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-03-30PCI/AER: Use cached AER Capability offsetFrederick Lawler3-8/+14
Replace pci_find_ext_capability(..., PCI_EXT_CAP_ID_ERR) calls with pci_dev->aer_cap. pci_dev->aer_cap is initialized in pci_init_capabilities(), which happens before any of these users of the AER Capability. Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-30PCI/portdrv: Rename and reverse sense of pcie_ports_autoBjorn Helgaas3-20/+12
The platform may restrict the OS's use of PCIe services, e.g., via the ACPI _OSC method. The user may use "pcie_ports=native" to force the port driver to use PCIe services even if the platform asked us not to. The "pcie_ports=native" parameter determines the setting of pcie_ports_auto. Rename this to pcie_ports_native and reverse the sense to simplify the code. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-30PCI/portdrv: Encapsulate pcie_ports_auto inside the port driverBjorn Helgaas1-0/+2
"pcie_ports_auto" is only used inside the PCIe port driver itself, so move it from include/linux/pci.h to portdrv.h so it's not visible to the whole kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-30PCI/portdrv: Remove unnecessary "pcie_ports=auto" parameterBjorn Helgaas1-3/+0
The "pcie_ports=auto" parameter set pcie_ports_disabled and pcie_ports_auto to their compiled-in defaults, so specifying the parameter is the same as not using it at all. Remove the "pcie_ports=auto" parameter and update the documentation. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-30PCI/portdrv: Remove "pcie_hp=nomsi" kernel parameterBjorn Helgaas2-29/+3
7570a333d8b0 ("PCI: Add pcie_hp=nomsi to disable MSI/MSI-X for pciehp driver") added the "pcie_hp=nomsi" kernel parameter to work around this error on shutdown: irq 16: nobody cared (try booting with the "irqpoll" option) Pid: 1081, comm: reboot Not tainted 3.2.0 #1 ... Disabling IRQ #16 This happened on an unspecified system (possibly involving the Integrated Device Technology, Inc. Device 807f bridge) where "an un-wanted interrupt is generated when PCI driver switches from MSI/MSI-X to INTx while shutting down the device." The implication was that the device was buggy, but it is normal for a device to use INTx after MSI/MSI-X have been disabled. The only problem was that the driver was still attached and it wasn't prepared for INTx interrupts. Prarit Bhargava fixed this issue with fda78d7a0ead ("PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()"). There is no automated way to set this parameter, so it's not very useful for distributions or end users. It's really only useful for debugging, and we have "pci=nomsi" for that purpose. Revert 7570a333d8b0 to remove the "pcie_hp=nomsi" parameter. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> CC: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> CC: Prarit Bhargava <prarit@redhat.com>
2018-03-30PCI/portdrv: Remove unnecessary include of <linux/pci-aspm.h>Bjorn Helgaas1-1/+0
portdrv_pci.c doesn't use anything from <linux/pci-aspm.h>. Remove the include of it. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-30PCI/portdrv: Simplify PCIe feature permission checkingBjorn Helgaas3-28/+26
Some PCIe features (AER, DPC, hotplug, PME) can be managed by either the platform firmware or the OS, so the host bridge driver may have to request permission from the platform before using them. On ACPI systems, this is done by negotiate_os_control() in acpi_pci_root_add(). The PCIe port driver later uses pcie_port_platform_notify() and pcie_port_acpi_setup() to figure out whether it can use these features. But all we need is a single bit for each service, so these interfaces are needlessly complicated. Simplify this by adding bits in the struct pci_host_bridge to show when the OS has permission to use each feature: + unsigned int native_aer:1; /* OS may use PCIe AER */ + unsigned int native_hotplug:1; /* OS may use PCIe hotplug */ + unsigned int native_pme:1; /* OS may use PCIe PME */ These are set when we create a host bridge, and the host bridge driver can clear the bits corresponding to any feature the platform doesn't want us to use. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-30PCI/portdrv: Remove unused PCIE_PORT_SERVICE_VCBjorn Helgaas3-15/+7
No driver registers for PCIE_PORT_SERVICE_VC, so remove it. This removes the VC "service" files from /sys/bus/pci_express/devices, e.g., 0000:07:00.0:pcie108, 0000:08:04.0:pcie208 (all the files that contained "8" as the last digit of the "pcieXXX" part). The port driver created these files for PCIe port devices that have a VC Capability. Since this reduces PCIE_PORT_DEVICE_MAXSERVICES and moves DPC down into the spot where VC used to be, the DPC sysfs files will now be named "pcieXX8". I don't think there's anything useful userspace can do with those files, so I hope nobody cares about these filenames. There is no VC driver that calls pcie_port_service_register(), so there never was a /sys/bus/pci_express/drivers/vc directory. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-03-30PCI/portdrv: Remove pcie_port_bus_type link order dependencyBjorn Helgaas3-68/+2
The pcie_port_bus_type must be registered before drivers that depend on it can be registered. Those drivers include: pcied_init() # PCIe native hotplug driver aer_service_init() # AER driver dpc_service_init() # DPC driver pcie_pme_service_init() # PME driver Previously we registered pcie_port_bus_type from pcie_portdrv_init(), a device_initcall. The callers of pcie_port_service_register() (above) are also device_initcalls. This is fragile because the device_initcall ordering depends on link order, which is not explicit. Register pcie_port_bus_type from pci_driver_init() along with pci_bus_type. This removes the link order dependency between portdrv and the pciehp, AER, DPC, and PCIe PME drivers. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 18:34:31 +0000