summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pcie
AgeCommit message (Collapse)AuthorFilesLines
2014-01-13Merge branch 'pci/dead-code' into nextBjorn Helgaas1-12/+0
* pci/dead-code: PCI: Make local functions static PCI: Remove unused alloc_pci_dev() PCI: Remove unused pci_renumber_slot() PCI: Remove unused pcie_aspm_enabled() PCI: Remove unused pci_vpd_truncate() PCI: Remove unused ID-Based Ordering support PCI: Remove unused Optimized Buffer Flush/Fill support PCI: Remove unused Latency Tolerance Reporting support PCI: Removed unused parts of Page Request Interface support Conflicts: drivers/pci/pci.c include/linux/pci.h
2014-01-13Merge branch 'pci/aer' into nextBjorn Helgaas1-4/+4
* pci/aer: PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0 ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
2014-01-13PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0Betty Dall1-4/+4
In the discussion for this set of patches [link below], Bjorn Helgaas pointed out that the ACPI HEST AER error sources do not have the PCIe segment number associated with the bus. I worked with the ACPI spec and got this change to definition of the "Bus" field into the recently released ACPI Spec 5.0a section 18.3.2.3-5: Identifies the PCI Bus and Segment of the device. The Bus is encoded in bits 0-7. For systems that expose multiple PCI segment groups, the segment number is encoded in bits 8-23 and bits 24-31 must be zero. For systems that do not expose multiple PCI segment groups, bits 8-31 must be zero. If the GLOBAL flag is specified, this field is ignored. This patch makes use of the new definition in the only place in the kernel that uses the acpi_hest_aer_common's bus field. This depends on 36f3615152c1 ("ACPICA: Add helper macros to extract bus/segment numbers from HEST table.") Link: http://lkml.kernel.org/r/1370542251-27387-1-git-send-email-betty.dall@hp.com Signed-off-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-13PCI: Remove unused pcie_aspm_enabled()Stephen Hemminger1-12/+0
My philosophy is unused code is dead code. And dead code is subject to bit rot and is a likely source of bugs. Use it or lose it. This reverts part of 3e1b16002af2 ("ACPI/PCI: PCIe ASPM _OSC support capabilities called when root bridge added"), removing this interface: pcie_aspm_enabled() [bhelgaas: split to separate patch] Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Andrew Patterson <andrew.patterson@hp.com>
2014-01-07Merge branch 'pci/msi' into nextBjorn Helgaas1-3/+4
* pci/msi: PCI/MSI: Add pci_enable_msi_range() and pci_enable_msix_range() PCI/MSI: Add pci_msix_vec_count() PCI/MSI: Remove pci_enable_msi_block_auto() PCI/MSI: Add pci_msi_vec_count()
2014-01-03PCI/MSI: Add pci_msix_vec_count()Alexander Gordeev1-3/+4
This creates an MSI-X counterpart for pci_msi_vec_count(). Device drivers can use this function to obtain maximum number of MSI-X interrupts the device supports and use that number in a subsequent call to pci_enable_msix(). pci_msix_vec_count() supersedes pci_msix_table_size() and returns a negative errno if device does not support MSI-X interrupts. After this update, callers must always check the returned value. The only user of pci_msix_table_size() was the PCI-Express port driver, which is also updated by this change. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org>
2013-12-20Merge branch 'pci/deletion' into nextBjorn Helgaas1-14/+13
* pci/deletion: PCI/portdrv: Remove extra get_device()/put_device() for pcie_device PCI/portdrv: Add put_device() after device_register() failure PCI/portdrv: Cleanup error paths
2013-12-19PCI/portdrv: Remove extra get_device()/put_device() for pcie_deviceBjorn Helgaas1-4/+1
Previously pcie_device_init() called get_device() if device_register() for the new pcie_device succeeded, and remove_iter() called put_device() when removing before unregistering the device. But device_register() already increments the reference count in device_add(), so we don't need to do it again here. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-19PCI/portdrv: Add put_device() after device_register() failureLevente Kurusa1-1/+1
This is required so that we give up the last reference to the device. Removed the kfree() as put_device will result in release_pcie_device() being called and hence the container of the device will be kfree'd. [bhelgaas: fix conflict after my previous cleanup] Signed-off-by: Levente Kurusa <levex@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-19PCI/portdrv: Cleanup error pathsBjorn Helgaas1-10/+12
Make the straightline path the normal no-error path. Check for errors and return them directly, instead of checking for success and putting the normal path in an "if" body. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-18Merge branch 'pci/aer' into nextBjorn Helgaas2-66/+77
* pci/aer: PCI/AER: Consolidate HEST error source parsers PCI/AER: Ignore non-PCIe AER error sources in aer_hest_parse() PCI/AER: Clean up error printing code a bit PCI/AER: Add a TLP header print helper
2013-12-13PCI/AER: Consolidate HEST error source parsersBjorn Helgaas1-16/+17
aer_hest_parse() and aer_hest_parse_aff() are almost identical. We use aer_hest_parse() to check the ACPI_HEST_FIRMWARE_FIRST flag for a specific device, and we use aer_hest_parse_aff() to check to see if any device sets the flag. This drops aer_hest_parse_aff() and enhances aer_hest_parse() so it collects the union of the PCIe ACPI_HEST_FIRMWARE_FIRST flag settings when no specific device is supplied. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Betty Dall <betty.dall@hp.com>
2013-12-13PCI/AER: Ignore non-PCIe AER error sources in aer_hest_parse()Betty Dall1-8/+17
aer_set_firmware_first() searches the HEST for an error source descriptor matching the specified PCI device. It uses the apei_hest_parse() iterator to call aer_hest_parse() for every descriptor in the HEST. Previously, aer_hest_parse() incorrectly assumed every descriptor was for a PCIe error source. This patch adds a check to avoid that error. [bhelgaas: factor check into helper, use in aer_hest_parse_aff(), changelog] Signed-off-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13PCI/AER: Clean up error printing code a bitBorislav Petkov1-24/+27
Save one indentation level in aer_print_error() for the generic case where we have info->status of an error, disregard 80 cols rule a bit for the sake of better readability, fix alignment. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13PCI/AER: Add a TLP header print helperBorislav Petkov1-23/+21
... and call it instead of duplicating the large printk format statement. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13PCI/portdrv: Remove superfluous name castGeert Uytterhoeven1-1/+1
device_driver.name is "const char *" Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-11-22Merge tag 'pci-v3.13-fixes-1' of ↵Linus Torvalds7-12/+11
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Miscellaneous - Remove duplicate disable from pcie_portdrv_remove() (Yinghai Lu) - Fix whitespace, capitalization, and spelling errors (Bjorn Helgaas)" * tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove() PCI: Fix whitespace, capitalization, and spelling errors
2013-11-20PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()Yinghai Lu1-1/+0
The pcie_portdrv .probe() method calls pci_enable_device() once, in pcie_port_device_register(), but the .remove() method calls pci_disable_device() twice, in pcie_port_device_remove() and in pcie_portdrv_remove(). That causes a "disabling already-disabled device" warning when removing a PCIe port device. This happens all the time when removing Thunderbolt devices, but is also easy to reproduce with, e.g., "echo 0000:00:1c.3 > /sys/bus/pci/drivers/pcieport/unbind" This patch removes the disable from pcie_portdrv_remove(). [bhelgaas: changelog, tag for stable] Reported-by: David Bulkow <David.Bulkow@stratus.com> Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v2.6.32+
2013-11-15kfifo API type safetyStefani Seibold1-1/+1
This patch enhances the type safety for the kfifo API. It is now safe to put const data into a non const FIFO and the API will now generate a compiler warning when reading from the fifo where the destination address is pointing to a const variable. As a side effect the kfifo_put() does now expect the value of an element instead a pointer to the element. This was suggested Russell King. It make the handling of the kfifo_put easier since there is no need to create a helper variable for getting the address of a pointer or to pass integers of different sizes. IMHO the API break is okay, since there are currently only six users of kfifo_put(). The code is also cleaner by kicking out the "if (0)" expressions. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-14PCI: Fix whitespace, capitalization, and spelling errorsBjorn Helgaas7-11/+11
Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-01PCI: Update pcie_ports 'auto' behavior for non-ACPI platformsAndrew Murray1-7/+8
The pcie_ports parameter, which defaults to 'auto', allows a user to specify if PCIe port services are disabled ('compat'), always enabled ('native'), or only used when allowed by the BIOS ('auto'). Where CONFIG_ACPI isn't enabled, as is often the case for non x86/ia64 platforms, the 'auto' behavior results in that of 'compat'. Thus in order to use port services on these platforms 'pcie_ports=native' must be added to the kernel command line. This patch results in the 'native' behavior being followed where 'auto' is selected and ACPI is not enabled. Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-03Merge tag 'pci-v3.12-changes' of ↵Linus Torvalds4-37/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: PCI device hotplug: - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman) - Assign resources on per-host bridge basis (Yinghai Lu) MPS (Max Payload Size): - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang) - Add warnings about unsafe MPS settings (Yijing Wang) - Simplify interface and messages (Bjorn Helgaas) SR-IOV: - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann) - Update NumVFs register when disabling SR-IOV (Yijing Wang) Virtualization: - Add bus and slot reset support (Alex Williamson) - Fix ACS (Access Control Services) issues (Alex Williamson) Miscellaneous: - Simplify PCIe Capability accessors (Bjorn Helgaas) - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott) - Disable decoding during BAR sizing only when necessary (Zoltan Kiss) - Delay enabling bridges until they're needed (Yinghai Lu) - Split Designware support into Synopsys and Exynos parts (Jingoo Han) - Convert class code to use dev_groups (Greg Kroah-Hartman) - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon) - Fix bridge I/O window alignment (Bjorn Helgaas) - Add pci_wait_for_pending_transaction() (Casey Leedom) - Use devm_ioremap_resource() in Marvell driver (Tushar Behera) * tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc() PCI: Remove pcie_cap_has_devctl() PCI: Support PCIe Capability Slot registers only for ports with slots PCI: Remove PCIe Capability version checks PCI: Allow PCIe Capability link-related register access for switches PCI: Add offsets of PCIe capability registers PCI: Tidy bitmasks and spacing of PCIe capability definitions PCI: Remove obsolete comment reference to pci_pcie_cap2() PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment PCI: Rename PCIe capability definitions to follow convention PCI: Warn if unsafe MPS settings detected PCI: Fix MPS peer-to-peer DMA comment syntax PCI: Disable decoding for BAR sizing only when it was actually enabled PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality PCI: Don't restrict MPS for slots below Root Ports PCI: Simplify MPS test for Downstream Port PCI: Remove unnecessary check for pcie_get_mps() failure ...
2013-08-15Merge branch 'pci/aw-reset-v5' into nextBjorn Helgaas3-36/+2
* pci/aw-reset-v5: PCI: Add pci_probe_reset_slot() and pci_probe_reset_bus() PCI: Remove aer_do_secondary_bus_reset() PCI: Tune secondary bus reset timing PCI: Wake-up devices before saving config space for reset PCI: Add pci_reset_slot() and pci_reset_bus() PCI: Split out pci_dev lock/unlock and save/restore PCI: Add slot reset option to pci_dev_reset() PCI: pciehp: Add reset_slot() method PCI: Add hotplug_slot_ops.reset_slot() PCI: Add pci_reset_bridge_secondary_bus()
2013-08-14PCI: Remove aer_do_secondary_bus_reset()Alex Williamson3-36/+2
One PCI bus reset function to rule them all. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-26PCI: pciehp: Convert pciehp to be builtin only, not modularBjorn Helgaas1-4/+1
Convert pciehp to be builtin only, with no module option. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-07-25PCI: Rename "PCI Express support" kconfig titleEzequiel Garcia1-1/+1
The previous option title "PCI Express support" is confusing. The name seems to imply this option is required to get PCIe support, which is not true. Fix it to "PCI Express Port Bus support" which is more accurate. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-03Merge tag 'pci-v3.11-changes' of ↵Linus Torvalds5-43/+56
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "PCI device hotplug - Add pci_alloc_dev() interface (Gu Zheng) - Add pci_bus_get()/put() for reference counting (Jiang Liu) - Fix SR-IOV reference count issues (Jiang Liu) - Remove unused acpi_pci_roots list (Jiang Liu) MSI - Conserve interrupt resources on x86 (Alexander Gordeev) AER - Force fatal severity when component has been reset (Betty Dall) - Reset link below Root Port as well as Downstream Port (Betty Dall) - Fix "Firmware first" flag setting (Bjorn Helgaas) - Don't parse HEST for non-PCIe devices (Bjorn Helgaas) ASPM - Warn when we can't disable ASPM as driver requests (Bjorn Helgaas) Miscellaneous - Add CircuitCo PCI IDs (Darren Hart) - Add AMD CZ SATA and SMBus PCI IDs (Shane Huang) - Work around Ivytown NTB BAR size issue (Jon Mason) - Detect invalid initial BAR values (Kevin Hao) - Add pcibios_release_device() (Sebastian Ott) - Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)" * tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci PCI: Add CircuitCo vendor ID and subsystem ID PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) PCI: Return early on allocation failures to unindent mainline code PCI: Simplify IOV implementation and fix reference count races PCI: Drop redundant setting of bus->is_added in virtfn_add_bus() unicore32/PCI: Remove redundant call of pci_bus_add_devices() m68k/PCI: Remove redundant call of pci_bus_add_devices() PCI / ACPI / PM: Use correct power state strings in messages PCI: Fix comment typo for pcie_pme_remove() PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev() PCI: Fix refcount issue in pci_create_root_bus() error recovery path ia64/PCI: Clean up pci_scan_root_bus() usage PCI/AER: Reset link for devices below Root Port or Downstream Port ACPI / APEI: Force fatal AER severity when component has been reset PCI/AER: Remove "extern" from function declarations PCI/AER: Move AER severity defines to aer.h PCI/AER: Set dev->__aer_firmware_first only for matching devices PCI/AER: Factor out HEST device type matching PCI/AER: Don't parse HEST table for non-PCIe devices ...
2013-06-14Merge branch 'pci/misc' into nextBjorn Helgaas1-1/+1
* pci/misc: PCI / ACPI / PM: Use correct power state strings in messages PCI: Fix comment typo for pcie_pme_remove() PCI: Add pcibios_release_device()
2013-06-10PCI: Fix comment typo for pcie_pme_remove()Yijing Wang1-1/+1
Fix trivial comment typo for pcie_pme_remove(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-07Merge branch 'pci/betty-aer-v3' into nextBjorn Helgaas3-35/+33
* pci/betty-aer-v3: PCI/AER: Reset link for devices below Root Port or Downstream Port ACPI / APEI: Force fatal AER severity when component has been reset PCI/AER: Remove "extern" from function declarations PCI/AER: Move AER severity defines to aer.h PCI/AER: Set dev->__aer_firmware_first only for matching devices PCI/AER: Factor out HEST device type matching PCI/AER: Don't parse HEST table for non-PCIe devices
2013-06-06PCI/AER: Reset link for devices below Root Port or Downstream PortBetty Dall1-8/+9
When a PCIe device reports a fatal error, we reset the link leading to it. Previously we only did this for devices below Downstream Ports, not for devices directly below Root Ports. This patch changes that so we reset the link leading to devices below Root Ports just like we do for those below Downstream Ports. [bhelgaas: changelog, keep dev_printk(KERN_DEBUG)] Signed-off-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06PCI/AER: Move AER severity defines to aer.hBetty Dall1-4/+0
The function aer_recover_queue() is a public interface and the severity argument uses #defines that are in the private header pci/pcie/aer/aerdrv.h. This patch moves the #defines from pci/pcie/aer/aerdrv.h to include/linux/aer.h. [bhelgaas: split "remove 'extern' from declarations" to another patch] Signed-off-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06PCI/AER: Set dev->__aer_firmware_first only for matching devicesBjorn Helgaas1-4/+4
Previously, we always updated info->firmware_first, even for HEST entries that didn't match the device. Therefore, if the last HEST descriptor was a PCIe structure that didn't match the device, we always cleared dev->__aer_firmware_first. Tested-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06PCI/AER: Factor out HEST device type matchingBjorn Helgaas1-18/+17
This factors out the matching of HEST structure type and PCIe device type to improve readability. No functional change. Tested-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06PCI/AER: Don't parse HEST table for non-PCIe devicesBjorn Helgaas1-2/+4
AER is a PCIe-only capability, so there's no point in trying to match a HEST PCIe structure with a non-PCIe device. Previously, a HEST global AER bridge entry (type 8) could incorrectly match *any* bridge, even a legacy PCI-PCI bridge, and a non-global HEST entry could match a legacy PCI device. Tested-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-05-30aerdrv: Move cper_print_aer() call out of interrupt contextLance Ortiz2-3/+6
The following warning was seen on 3.9 when a corrected PCIe error was being handled by the AER subsystem. WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90() This occurred because a call to pci_get_domain_bus_and_slot() was added to cper_print_pcie() to setup for the call to cper_print_aer(). The warning showed up because cper_print_pcie() is called in an interrupt context and pci_get* functions are not supposed to be called in that context. The solution is to move the cper_print_aer() call out of the interrupt context and into aer_recover_work_func() to avoid any warnings when calling pci_get* functions. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-05-28PCI: Fix kerneldoc for pci_disable_link_state()Yijing Wang1-4/+9
Fix kerneldoc for pci_disable_link_state(). [bhelgaas: expand comment, fix typos] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-05-21PCI/ASPM: Warn when driver asks to disable ASPM, but we can't do itBjorn Helgaas1-3/+13
Some devices have hardware problems related to using ASPM. Drivers for these devices use pci_disable_link_state() to prevent their device from entering L0s or L1. But on platforms where the OS doesn't have permission to manage ASPM, pci_disable_link_state() doesn't actually disable ASPM. Windows has a similar mechanism ("PciASPMOptOut"), and when the OS doesn't have control of ASPM, it doesn't actually disable ASPM either. This patch just adds a warning in dmesg about the fact that pci_disable_link_state() is doing nothing. Reported-by: Emmanuel Grumbach <egrumbach@gmail.com> Reference: https://lkml.kernel.org/r/CANUX_P3F5YhbZX3WGU-j1AGpbXb_T9Bis2ErhvKkFMtDvzatVQ@mail.gmail.com Reference: https://bugzilla.kernel.org/show_bug.cgi?id=57331 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-29Merge tag 'pci-v3.10-changes' of ↵Linus Torvalds8-39/+29
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.10 merge window: PCI device hotplug - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe) - Make acpiphp builtin only, not modular (Jiang Liu) - Add acpiphp mutual exclusion (Jiang Liu) Power management - Skip "PME enabled/disabled" messages when not supported (Rafael Wysocki) - Fix fallback to PCI_D0 (Rafael Wysocki) Miscellaneous - Factor quirk_io_region (Yinghai Lu) - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas) - Clean up EISA resource initialization and logging (Bjorn Helgaas) - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas) - MIPS: Initialize of_node before scanning bus (Gabor Juhos) - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor Juhos) - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang) - Fix aer_inject return values (Prarit Bhargava) - Remove PME/ACPI dependency (Andrew Murray) - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)" * tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) vfio-pci: Use cached MSI/MSI-X capabilities vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Remove "extern" from function declarations PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h PCI: Use msix_table_size() directly, drop multi_msix_capable() PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros PCI: Drop is_64bit_address() and is_mask_bit_support() macros PCI: Drop msi_data_reg() macro PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc PCI: Clean up MSI/MSI-X capability #defines PCI: Use cached MSI-X cap while enabling MSI-X PCI: Use cached MSI cap while enabling MSI interrupts PCI: Remove MSI/MSI-X cap check in pci_msi_check_device() PCI: Cache MSI/MSI-X capability offsets in struct pci_dev PCI: Use u8, not int, for PM capability offset [SCSI] megaraid_sas: Use correct #define for MSI-X capability PCI: Remove "extern" from function declarations ...
2013-04-17Merge branch 'pci/cleanup' into nextBjorn Helgaas5-30/+24
* pci/cleanup: PCI: Remove "extern" from function declarations PCI: Warn about failures instead of "must_check" functions PCI: Remove __must_check from definitions PCI: Remove unused variables PCI: Move cpci_hotplug_init() proto to header file PCI: Make local functions/structs static PCI: Fix missing prototype for pcie_port_acpi_setup() Conflicts: drivers/pci/hotplug/acpiphp.h include/linux/pci.h
2013-04-17PCI: Remove "extern" from function declarationsBjorn Helgaas2-16/+16
We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-15Merge branch 'pci/misc' into nextBjorn Helgaas3-6/+4
* pci/misc: PCI: Clean up quirk_io_region PCI: Use vma_pages() to replace (vm_end - vm_start) >> PAGE_SHIFT PCI: Use PCI_EXP_SLTCAP_PSN mask when extracting slot number PCI: Remove unnecessary dependencies between PME and ACPI [SCSI] mvumi: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b [SCSI] mvsas: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b ahci: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b PCI: Define macro for Marvell vendor ID PCI: Add MSI INTX_DISABLE quirks for AR8161/AR8162/AR8171/AR8172/E210X PCI: aer_inject: Fix return values when device not found
2013-04-15PCI: Remove unnecessary dependencies between PME and ACPIBjorn Helgaas2-3/+1
PCIe PME doesn't depend on ACPI, so remove the #includes and Kconfig dependency. Based-on-patch-by: Andrew Murray <Andrew.Murray@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-15PCI: Remove unused variablesBjorn Helgaas1-12/+5
This fixes "set but not used" warnings found via "make W=1". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-12PCI: Make local functions/structs staticBjorn Helgaas1-2/+2
This fixes "no previous prototype" warnings found via "make W=1". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-12PCI: Fix missing prototype for pcie_port_acpi_setup()Andy Shevchenko1-0/+1
This fixes a "no previous prototype" warning for pcie_port_acpi_setup() found via "make W=1". [bhelgaas: changelog] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-03PCI: aer_inject: Fix return values when device not foundPrarit Bhargava1-3/+3
Currently the aer_inject driver returns -ENOTTY when the target PCIe device root port is not found or if the device or root port doesn't support AER. In the case where the root port isn't found, the driver should return -ENODEV, and in the other cases it should return -EPERM. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-03PCI/PM: Disable runtime PM of PCIe portsRafael J. Wysocki1-13/+0
The runtime PM of PCIe ports turns out to be quite fragile, as in some cases things work while in some other cases they don't and we don't seem to have a good way to determine whether or not they are going to work in advance. For this reason, avoid enabling runtime PM for PCIe ports by keeping their runtime PM reference counters always above 0 for the time being. When a PCIe port is suspended, it can no longer report events like hotplug, so hotplug below the port may not work, as in the bug report below. [bhelgaas: changelog, stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53811 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.6+
2013-03-26PCI/AER: Remove local PCI_BUS() define and use PCI_BUS_NUM() from PCIShuah Khan1-3/+1
Change to remove local PCI_BUS() define and use the new PCI_BUS_NUM() interface from PCI. Signed-off-by: Shuah Khan <shuah.khan@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joerg Roedel <joro@8bytes.org>
2013-02-25Merge tag 'pci-v3.9-changes' of ↵Linus Torvalds2-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...