summaryrefslogtreecommitdiffstats
path: root/drivers/pci/msi.c
AgeCommit message (Collapse)AuthorFilesLines
2019-07-21Merge tag 'ntb-5.3' of git://github.com/jonmason/ntbLinus Torvalds1-9/+45
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
2019-07-09PCI: Fix typos and whitespace errorsBjorn Helgaas1-21/+22
Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2019-06-13PCI/MSI: Support allocating virtual MSI interruptsLogan Gunthorpe1-9/+45
For NTB devices, we want to be able to trigger MSI interrupts through a memory window. In these cases we may want to use more interrupts than the NTB PCI device has available in its MSI-X table. We allow for this by creating a new 'virtual' interrupt. These interrupts are allocated as usual but are not programmed into the MSI-X table (as there may not be space for them). The MSI address and data will then handled through an NTB MSI library introduced later in this series. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-04-29PCI: Add pci_dev_id() helperHeiner Kallweit1-3/+3
In several places in the kernel we find PCI_DEVID used like this: PCI_DEVID(dev->bus->number, dev->devfn) Add a "pci_dev_id(struct pci_dev *dev)" helper to simplify callers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-02-18PCI/MSI: Remove obsolete sanity checks for multiple interrupt setsThomas Gleixner1-14/+0
Multiple interrupt sets for affinity spreading are now handled in the core code and the number of sets and their size is recalculated via a driver supplied callback. That avoids the requirement to invoke pci_alloc_irq_vectors_affinity() with the arguments minvecs and maxvecs set to the same value and the callsite handling the ENOSPC situation. Remove the now obsolete sanity checks and the related comments. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-nvme@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: Keith Busch <keith.busch@intel.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com> Link: https://lkml.kernel.org/r/20190216172228.778630549@linutronix.de
2019-02-18genirq/affinity: Add new callback for (re)calculating interrupt setsMing Lei1-9/+16
The interrupt affinity spreading mechanism supports to spread out affinities for one or more interrupt sets. A interrupt set contains one or more interrupts. Each set is mapped to a specific functionality of a device, e.g. general I/O queues and read I/O queus of multiqueue block devices. The number of interrupts per set is defined by the driver. It depends on the total number of available interrupts for the device, which is determined by the PCI capabilites and the availability of underlying CPU resources, and the number of queues which the device provides and the driver wants to instantiate. The driver passes initial configuration for the interrupt allocation via a pointer to struct irq_affinity. Right now the allocation mechanism is complex as it requires to have a loop in the driver to determine the maximum number of interrupts which are provided by the PCI capabilities and the underlying CPU resources. This loop would have to be replicated in every driver which wants to utilize this mechanism. That's unwanted code duplication and error prone. In order to move this into generic facilities it is required to have a mechanism, which allows the recalculation of the interrupt sets and their size, in the core code. As the core code does not have any knowledge about the underlying device, a driver specific callback is required in struct irq_affinity, which can be invoked by the core code. The callback gets the number of available interupts as an argument, so the driver can calculate the corresponding number and size of interrupt sets. At the moment the struct irq_affinity pointer which is handed in from the driver and passed through to several core functions is marked 'const', but for the callback to be able to modify the data in the struct it's required to remove the 'const' qualifier. Add the optional callback to struct irq_affinity, which allows drivers to recalculate the number and size of interrupt sets and remove the 'const' qualifier. For simple invocations, which do not supply a callback, a default callback is installed, which just sets nr_sets to 1 and transfers the number of spreadable vectors to the set_size array at index 0. This is for now guarded by a check for nr_sets != 0 to keep the NVME driver working until it is converted to the callback mechanism. To make sure that the driver configuration is correct under all circumstances the callback is invoked even when there are no interrupts for queues left, i.e. the pre/post requirements already exhaust the numner of available interrupts. At the PCI layer irq_create_affinity_masks() has to be invoked even for the case where the legacy interrupt is used. That ensures that the callback is invoked and the device driver can adjust to that situation. [ tglx: Fixed the simple case (no sets required). Moved the sanity check for nr_sets after the invocation of the callback so it catches broken drivers. Fixed the kernel doc comments for struct irq_affinity and de-'This patch'-ed the changelog ] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-nvme@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: Keith Busch <keith.busch@intel.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com> Link: https://lkml.kernel.org/r/20190216172228.512444498@linutronix.de
2019-01-15PCI/MSI: Return -ENOSPC from pci_alloc_irq_vectors_affinity()Ming Lei1-9/+13
The API of pci_alloc_irq_vectors_affinity() says it returns -ENOSPC if fewer than @min_vecs interrupt vectors are available for @dev. However, if a device supports MSI-X but not MSI and a caller requests @min_vecs that can't be satisfied by MSI-X, we previously returned -EINVAL (from the failed attempt to enable MSI), not -ENOSPC. When -ENOSPC is returned, callers may reduce the number IRQs they request and try again. Most callers can use the @min_vecs and @max_vecs parameters to avoid this retry loop, but that doesn't work when using IRQ affinity "nr_sets" because rebalancing the sets is driver-specific. This return value bug has been present since pci_alloc_irq_vectors() was added in v4.10 by aff171641d18 ("PCI: Provide sensible IRQ vector alloc/free routines"), but it wasn't an issue because @min_vecs/@max_vecs removed the need for callers to iteratively reduce the number of IRQs requested and retry the allocation, so they didn't need to distinguish -ENOSPC from -EINVAL. In v5.0, 6da4b3ab9a6e ("genirq/affinity: Add support for allocating interrupt sets") added IRQ sets to the interface, which reintroduced the need to check for -ENOSPC and possibly reduce the number of IRQs requested and retry the allocation. Signed-off-by: Ming Lei <ming.lei@redhat.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jens Axboe <axboe@fb.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de>
2018-12-19genirq/core: Introduce struct irq_affinity_descDou Liyang1-5/+4
The interrupt affinity management uses straight cpumask pointers to convey the automatically assigned affinity masks for managed interrupts. The core interrupt descriptor allocation also decides based on the pointer being non NULL whether an interrupt is managed or not. Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. To remedy that situation it's required to convey more information than the cpumasks through various interfaces related to interrupt descriptor allocation. Instead of adding yet another argument, create a new data structure 'irq_affinity_desc' which for now just contains the cpumask. This struct can be expanded to convey auxilliary information in the next step. No functional change, just preparatory work. [ tglx: Simplified logic and clarified changelog ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dou Liyang <douliyangs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: kashyap.desai@broadcom.com Cc: shivasharan.srikanteshwara@broadcom.com Cc: sumit.saxena@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-2-douliyangs@gmail.com
2018-11-05genirq/affinity: Add support for allocating interrupt setsJens Axboe1-0/+14
A driver may have a need to allocate multiple sets of MSI/MSI-X interrupts, and have them appropriately affinitized. Add support for defining a number of sets in the irq_affinity structure, of varying sizes, and get each set affinitized correctly across the machine. [ tglx: Minor changelog tweaks ] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Cc: linux-block@vger.kernel.org Link: https://lkml.kernel.org/r/20181102145951.31979-5-ming.lei@redhat.com
2018-09-25PCI/MSI: Warn and return error if driver enables MSI/MSI-X twiceTonghao Zhang1-3/+6
It is a serious driver defect to enable MSI or MSI-X more than once. Doing so may panic the kernel as in the stack trace below: Call Trace: sysfs_add_one+0xa5/0xd0 create_dir+0x7c/0xe0 sysfs_create_subdir+0x1c/0x20 internal_create_group+0x6d/0x290 sysfs_create_groups+0x4a/0xa0 populate_msi_sysfs+0x1cd/0x210 pci_enable_msix+0x31c/0x3e0 igbuio_pci_open+0x72/0x300 [igb_uio] uio_open+0xcc/0x120 [uio] chrdev_open+0xa1/0x1e0 [...] do_sys_open+0xf3/0x1f0 SyS_open+0x1e/0x20 system_call_fastpath+0x16/0x1b ---[ end trace 11042e2848880209 ]--- Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa056b4fa We want to keep the WARN_ON() and stack trace so the driver can be fixed, but we can avoid the kernel panic by returning an error. We may still get warnings like this: Call Trace: pci_enable_msix+0x3c9/0x3e0 igbuio_pci_open+0x72/0x300 [igb_uio] uio_open+0xcc/0x120 [uio] chrdev_open+0xa1/0x1e0 [...] do_sys_open+0xf3/0x1f0 SyS_open+0x1e/0x20 system_call_fastpath+0x16/0x1b ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:526 sysfs_add_one+0xa5/0xd0() sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:01:00.1/msi_irqs' Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> [bhelgaas: changelog, fix patch whitespace, remove !!] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-14PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchipsHeiner Kallweit1-0/+3
If flag IRQCHIP_ONESHOT_SAFE isn't set for an irqchip and we have a threaded interrupt with no primary handler, flag IRQF_ONESHOT needs to be set for the interrupt, causing some overhead in the threaded interrupt handler. For more detailed explanation also check following comment in __setup_irq(): The interrupt was requested with handler = NULL, so we use the default primary handler for it. But it does not have the oneshot flag set. In combination with level interrupts this is deadly, because the default primary handler just wakes the thread, then the irq lines is reenabled, but the device still has the level irq asserted. Rinse and repeat.... While this works for edge type interrupts, we play it safe and reject unconditionally because we can't say for sure which type this interrupt really has. The type flags are unreliable as the underlying chip implementation can override them. Another comment in __setup_irq() gives a hint already that this overhead can be avoided for PCI-MSI: Some irq chips like MSI based interrupts are per se one shot safe. Check the chip flags, so we can avoid the unmask dance at the end of the threaded handler for those. Following this let's mark all PCI-MSI irqchips as oneshot-safe. See also discussion here: https://lkml.kernel.org/r/alpine.DEB.2.21.1808032136490.1658@nanos.tec.linutronix.de Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-2/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-13genirq/msi: Limit level-triggered MSI to platform devicesMarc Zyngier1-0/+3
Nobody would be insane enough to try and use level triggered MSIs on PCI, but let's make sure it doesn't happen. Also, let's mandate that the irqchip backing the platform MSI domain is providing the IRQCHIP_SUPPORTS_LEVEL_MSI flag. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20180508121438.11301-3-marc.zyngier@arm.com
2018-03-19PCI: Tidy commentsBjorn Helgaas1-2/+1
Remove pointless comments that tell us the file name, remove blank line comments, follow multi-line comment conventions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-02-01Merge branch 'pci/spdx' into nextBjorn Helgaas1-0/+1
* pci/spdx: PCI: Add SPDX GPL-2.0+ to replace implicit GPL v2 or later statement PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate PCI: Add SPDX GPL-2.0 to replace COPYING boilerplate PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate PCI: Add SPDX GPL-2.0 when no license was specified
2018-01-26PCI: Add SPDX GPL-2.0 when no license was specifiedBjorn Helgaas1-0/+1
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") added SPDX GPL-2.0 to several PCI files that previously contained no license information. Add SPDX GPL-2.0 to all other PCI files that did not contain any license information and hence were under the default GPL version 2 license of the kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-18PCI: Add wrappers for dev_printk()Frederick Lawler1-4/+3
Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: squash into one patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-18PCI/MSI: Set MSI_FLAG_MUST_REACTIVATE in core codeThomas Gleixner1-0/+2
If interrupt reservation mode is enabled then the PCI/MSI interrupts must be reactivated after early activation. Make sure that all callers of pci_msi_create_irq_domain() have the MSI_FLAG_MUST_REACTIVATE set when reservation mode is enabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Link: https://lkml.kernel.org/r/20171017075600.448649905@linutronix.de
2017-09-08Merge tag 'pci-v4.14-changes' of ↵Linus Torvalds1-5/+22
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add enhanced Downstream Port Containment support, which prints more details about Root Port Programmed I/O errors (Dongdong Liu) - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang) - add MediaTek MT2712 and MT7622 support (Ryder Lee) - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang) - add Qualcom IPQ8074 support (Varadarajan Narayanan) - add R-Car r8a7743/5 device tree support (Biju Das) - add Rockchip per-lane PHY support for better power management (Shawn Lin) - fix IRQ mapping for hot-added devices by replacing the pci_fixup_irqs() boot-time design with a host bridge hook called at probe-time (Lorenzo Pieralisi, Matthew Minter) - fix race when enabling two devices that results in upstream bridge not being enabled correctly (Srinath Mannam) - fix pciehp power fault infinite loop (Keith Busch) - fix SHPC bridge MSI hotplug events by enabling bus mastering (Aleksandr Bezzubikov) - fix a VFIO issue by correcting PCIe capability sizes (Alex Williamson) - fix an INTD issue on Xilinx and possibly other drivers by unifying INTx IRQ domain support (Paul Burton) - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg Roedel) - allow APM X-Gene device assignment to guests by adding an ACS quirk (Feng Kan) - fix driver crashes by disabling Extended Tags on Broadcom HT2100 (Extended Tags support is required for PCIe Receivers but not Requesters, and we now enable them by default when Requesters support them) (Sinan Kaya) - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs use the real Requester ID (not a phantom RID) (Robin Murphy) - prevent assignment of Intel VMD children to guests (which may be supported eventually, but isn't yet) by not associating an IOMMU with them (Jon Derrick) - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott Bauer) - fix a Function-Level Reset issue with Intel 750 NVMe by waiting longer (up to 60sec instead of 1sec) for device to become ready (Sinan Kaya) - fix a Function-Level Reset issue on iProc Stingray by working around hardware defects in the CRS implementation (Oza Pawandeep) - fix an issue with Intel NVMe P3700 after an iProc reset by adding a delay during shutdown (Oza Pawandeep) - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking in compose_msi_msg() (Stephen Hemminger) - fix a wireless LAN driver timeout by clearing DesignWare MSI interrupt status after it is handled, not before (Faiz Abbas) - fix DesignWare ATU enable checking (Jisheng Zhang) - reduce Layerscape dependencies on the bootloader by doing more initialization in the driver (Hou Zhiqiang) - improve Intel VMD performance allowing allocation of more IRQ vectors than present CPUs (Keith Busch) - improve endpoint framework support for initial DMA mask, different BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon Vijay Abraham I, Stan Drozd) - rework CRS support to add periodic messages while we poll during enumeration and after Function-Level Reset and prepare for possible other uses of CRS (Sinan Kaya) - clean up Root Port AER handling by removing unnecessary code and moving error handler methods to struct pcie_port_service_driver (Christoph Hellwig) - clean up error handling paths in various drivers (Bjorn Andersson, Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen, Lorenzo Pieralisi, Sergei Shtylyov) - clean up SR-IOV resource handling by disabling VF decoding before updating the corresponding resource structs (Gavin Shan) - clean up DesignWare-based drivers by unifying quirks to update Class Code and Interrupt Pin and related handling of write-protected registers (Hou Zhiqiang) - clean up by adding empty generic pcibios_align_resource() and pcibios_fixup_bus() and removing empty arch-specific implementations (Palmer Dabbelt) - request exclusive reset control for several drivers to allow cleanup elsewhere (Philipp Zabel) - constify various structures (Arvind Yadav, Bhumika Goyal) - convert from full_name() to %pOF (Rob Herring) - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn Lin) * tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits) PCI: xgene: Clean up whitespace PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset PCI: xgene: Fix platform_get_irq() error handling PCI: xilinx-nwl: Fix platform_get_irq() error handling PCI: rockchip: Fix platform_get_irq() error handling PCI: altera: Fix platform_get_irq() error handling PCI: spear13xx: Fix platform_get_irq() error handling PCI: artpec6: Fix platform_get_irq() error handling PCI: armada8k: Fix platform_get_irq() error handling PCI: dra7xx: Fix platform_get_irq() error handling PCI: exynos: Fix platform_get_irq() error handling PCI: iproc: Clean up whitespace PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP PCI: iproc: Add 500ms delay during device shutdown PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag() PCI/AER: Reformat AER register definitions iommu/vt-d: Prevent VMD child devices from being remapping targets x86/PCI: Use is_vmd() rather than relying on the domain number ...
2017-08-25PCI/MSI: Don't warn when irq_create_affinity_masks() returns NULLChristoph Hellwig1-10/+3
irq_create_affinity_masks() can return NULL on non-SMP systems, when there are not enough "free" vectors available to spread, or if memory allocation for the CPU masks fails. Only the allocation failure is of interest, and even then the system will work just fine except for non-optimally spread vectors. Thus remove the warnings. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net>
2017-08-14PCI/MSI: Assume MSIs use real Requester ID, not an aliasRobin Murphy1-5/+22
Currently, we handle all DMA aliases equally when calculating MSI requester IDs for the generic infrastructure. This turns out to be the wrong thing to do in the face of pure DMA quirks like those of Marvell SATA cards, where in the usual case the last thing seen in the alias walk is the DMA phantom function: we end up configuring the MSI doorbell to expect that alias, then find we have no interrupts since the MSI writes still come from the 'real' RID, thus get filtered out and ignored. Improve the alias walk to only account for the topological aliases that matter, based on the logic from the Intel IRQ remapping code. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-07-08Merge tag 'pci-v4.13-changes' of ↵Linus Torvalds1-12/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...
2017-06-22irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded accessMarc Zyngier1-1/+1
Now that we have irq_domain_update_bus_token(), switch everyone over to it. The debugfs code thanks you for your continued support. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-22PCI/MSI: Ignore affinity if pre/post vector count is more than min_vecsMichael Hernandez1-12/+2
min_vecs is the minimum amount of vectors needed to operate in MSI-X mode which may just include the vectors that don't need affinity. Disabling affinity settings causes the qla2xxx driver scsi_add_host() to fail when blk_mq is enabled as the blk_mq_pci_map_queues() expects affinity masks on each vector. Fixes: dfef358bd1be ("PCI/MSI: Don't apply affinity if there aren't enough vectors left") Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # v4.10+
2017-05-08Merge tag 'pci-v4.12-changes' of ↵Linus Torvalds1-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
2017-04-28Merge branch 'pci/msi' into nextBjorn Helgaas1-4/+6
* pci/msi: PCI/MSI: Use dev_printk() when possible of/pci: Remove unused MSI controller helpers PCI: mvebu: Remove useless MSI enabling code PCI: aardvark: Move to MSI handling using generic MSI support PCI/MSI: Make pci_msi_shutdown() and pci_msix_shutdown() static PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()
2017-04-11PCI: remove pci_enable_msixChristoph Hellwig1-21/+0
Unused now that all callers switched to pci_alloc_irq_vectors. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-29PCI/MSI: Skip disabling disconnected devicesKeith Busch1-1/+6
Check the device connected state prior to executing device shutdown operations or writing MSI messages so that tear down on disconnected devices completes quicker. Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Wei Zhang <wzhang@fb.com>
2017-03-23PCI/MSI: Use dev_printk() when possibleBjorn Helgaas1-2/+4
Use dev_printk() when possible. This makes messages more consistent with other device-related messages and, in some cases, adds useful information. This changes messages like this: Unable to allocate affinity masks, ignoring to this: pci 0000:01:00.0: can't allocate MSI affinity masks for 4 vectors Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-09PCI/MSI: Make pci_msi_shutdown() and pci_msix_shutdown() staticBjorn Helgaas1-2/+2
pci_msi_shutdown() and pci_msix_shutdown() are used only in drivers/pci/msi.c, so make them static. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-02PCI: add an API to get node from vectorShaohua Li1-0/+16
Next patch will use the API to get the node from vector for nvme device Signed-off-by: Shaohua Li <shli@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-23Merge tag 'pci-v4.11-changes' of ↵Linus Torvalds1-100/+22
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...
2017-02-17PCI/MSI: Fix msi_desc->affinity memory leak when freeing MSI IRQsPrarit Bhargava1-1/+1
During device setup, msix_setup_entries() and msi_setup_entry() allocate msi_desc by calling alloc_msi_entry(). alloc_msi_entry() can also allocate a affinity cpumask. During device teardown free_msi_irqs() is called and the msi_desc is freed, but the affinity cpumask is leaked. Fix it by calling free_msi_entry() which frees both the msi_desc and the affinity cpumask. [bhelgaas: aa48b6f70886 ("genirq/MSI: Move alloc_msi_entry() from PCI into generic MSI code") moved alloc_msi_entry() from drivers/pci/msi.c to kernel/irq/msi.c and added a new corresponding free_msi_entry() interface. After aa48b6f70886, pci/msi.c used alloc_msi_entry(), but did its own kfree() instead of using free_msi_entry(). 28f4b04143c5 ("genirq/msi: Add cpumask allocation to alloc_msi_entry") added affinity to both alloc_msi_entry() and free_msi_entry(), but pci/msi.c didn't use free_msi_entry(), resulting in this leak.] Fixes: aa48b6f70886 ("genirq/MSI: Move alloc_msi_entry() from PCI into generic MSI code") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Myron Stowe <mstowe@redhat.com>
2017-02-10PCI/MSI: Return -ENOSPC if pci_enable_msi_range() can't get enough vectorsDennis Chen1-1/+1
If device doesn't support as many MSI vectors as the driver requested, we previously returned -EINVAL from __pci_enable_msi_range() and pci_enable_msi_range(). In other similar situations in both __pci_enable_msi_range() and __pci_enable_msix_range(), we returned -ENOSPC. Return -ENOSPC from __pci_enable_msi_range() so we do it consistently. [bhelgaas: changelog] Signed-off-by: Dennis Chen <dennis.chen@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Tejun Heo <tj@kernel.org> CC: Christoph Hellwig <hch@lst.de> CC: Tom Long Nguyen <tom.l.nguyen@intel.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Marc Zyngier <marc.zyngier@arm.com> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> CC: Steve Capper <steve.capper@arm.com>
2017-02-10PCI/MSI: Check that we have a legacy interrupt line before using itChristoph Hellwig1-3/+5
It seems like there are some devices (e.g. the PCIe root port driver) that may not always have a INTx interrupt. Check for dev->irq before returning a legacy interrupt in pci_irq_alloc_vectors to properly handle this case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-10PCI/MSI: Remove pci_msi_domain_{alloc,free}_irqs()Christoph Hellwig1-28/+2
Just call the msi_* version directly instead of having trivial wrappers for one or two callsites. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10PCI/MSI: Remove unused pci_msi_create_default_irq_domain()Christoph Hellwig1-48/+2
pci_msi_create_default_irq_domain() is never called in the whole tree, so remove it as well as all the supporting code for a default PCI MSI domain. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10PCI/MSI: Return failure when msix_setup_entries() failsChristophe JAILLET1-1/+1
If alloc_msi_entry() fails, we free resources and set ret = -ENOMEM. However, msix_setup_entries() returns 0 unconditionally. Return the error code instead. Fixes: e75eafb9b039 ("genirq/msi: Switch to new irq spreading infrastructure") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-02PCI/MSI: Don't apply affinity if there aren't enough vectors leftChristoph Hellwig1-0/+10
Bart reported a problem wіth an out of bounds access in the low-level IRQ affinity code, which we root caused to the qla2xxx driver assigning all its MSI-X vectors to the pre and post vectors, and not having any left for the actually spread IRQs. Fix this issue by not asking for affinity assignment when there are no vectors to assign left. Fixes: 402723ad5c62 ("PCI/MSI: Provide pci_alloc_irq_vectors_affinity()") Link: https://lkml.kernel.org/r/1485359225.3093.3.camel@sandisk.com Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Tested-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-13PCI/MSI: Remove pci_enable_msi_{exact,range}()Christoph Hellwig1-17/+9
All multi-MSI allocations are now done through pci_irq_alloc_vectors(), so remove the old pci_enable_msi_range() and pci_enable_msi_exact() interfaces. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-11PCI/MSI: Fix msi_capability_init() kernel-doc warningsRandy Dunlap1-1/+1
Fix kernel-doc warnings in pci/msi.c: ..//drivers/pci/msi.c:623: warning: No description found for parameter 'affd' ..//drivers/pci/msi.c:623: warning: Excess function parameter 'affinity' description in 'msi_capability_init' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-15Merge tag 'pci-v4.10-changes' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes: - add support for PCI on ARM64 boxes with ACPI. We already had this for theoretical spec-compliant hardware; now we're adding quirks for the actual hardware (Cavium, HiSilicon, Qualcomm, X-Gene) - add runtime PM support for hotplug ports - enable runtime suspend for Intel UHCI that uses platform-specific wakeup signaling - add yet another host bridge registration interface. We hope this is extensible enough to subsume the others - expose device revision in sysfs for DRM - to avoid device conflicts, make sure any VF BAR updates are done before enabling the VF - avoid unnecessary link retrains for ASPM - allow INTx masking on Mellanox devices that support it - allow access to non-standard VPD for Chelsio devices - update Broadcom iProc support for PAXB v2, PAXC v2, inbound DMA, etc - update Rockchip support for max-link-speed - add NVIDIA Tegra210 support - add Layerscape LS1046a support - update R-Car compatibility strings - add Qualcomm MSM8996 support - remove some uninformative bootup messages" * tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (115 commits) PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h x86/platform/intel-mid: Constify mid_pci_platform_pm PCI/ASPM: Don't retrain link if ASPM not possible PCI: iproc: Skip check for legacy IRQ on PAXC buses PCI: pciehp: Leave power indicator on when enabling already-enabled slot PCI: pciehp: Prioritize data-link event over presence detect PCI: rcar: Add gen3 fallback compatibility string for pcie-rcar PCI: rcar: Use gen2 fallback compatibility last PCI: rcar-gen2: Use gen2 fallback compatibility last PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init() ..
2016-11-09PCI/MSI: Provide pci_alloc_irq_vectors_affinity()Christoph Hellwig1-7/+13
This is a variant of pci_alloc_irq_vectors() that allows passing a struct irq_affinity to provide fine-grained IRQ affinity control. For now this means being able to exclude vectors at the beginning or end of the MSI vector space, but it could also be used for any other quirks needed in the future (e.g. more vectors than CPUs, or excluding CPUs from the spreading). Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-6-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09PCI/MSI: Propagate IRQ affinity description through the MSI codeChristoph Hellwig1-33/+33
No API change yet, just pass it down all the way from pci_alloc_irq_vectors() to the core MSI code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-5-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09genirq/affinity: Handle pre/post vectors in irq_create_affinity_masks()Christoph Hellwig1-2/+4
Only calculate the affinity for the main I/O vectors, and skip the pre or post vectors specified by struct irq_affinity. Also remove the irq_affinity cpumask argument that has never been used. If we ever need it in the future we can pass it through struct irq_affinity. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-4-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09genirq/affinity: Handle pre/post vectors in irq_calc_affinity_vectors()Christoph Hellwig1-4/+4
Only calculate the affinity for the main I/O vectors, and skip the pre or post vectors specified by struct irq_affinity. Also remove the irq_affinity cpumask argument that has never been used. If we ever need it in the future we can pass it through struct irq_affinity. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-3-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-08PCI/MSI: Check for NULL affinity mask in pci_irq_get_affinity()Jan Beulich1-1/+2
If msi_setup_entry() fails to allocate an affinity mask, it logs a message but continues on and allocates an MSI entry with entry->affinity == NULL. Check for this case in pci_irq_get_affinity() so we don't try to dereference a NULL pointer. [bhelgaas: changelog] Fixes: ee8d41e53efe "pci/msi: Retrieve affinity for a vector" Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> CC: Thomas Gleixner <tglx@linutronix.de>
2016-10-26doc: Add missing parameter for msi_setupStephen Hemminger1-0/+2
commit 92ca8d20dee2 ("genirq/msi: Switch to new irq spreading") introduced new parameter to msi_init_setup and but did not update docbook comments. Fixes 'make htmldocs' warning. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Cc: bhelgaas@google.com Cc: linux-pci@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-15Merge branch 'irq/for-block' into irq/coreThomas Gleixner1-58/+103
Add the new irq spreading infrastructure.
2016-09-14pci/msi: Retrieve affinity for a vectorThomas Gleixner1-0/+31
Add a helper to get the affinity mask for a given PCI irq vector. For MSI or MSI-X vectors these are stored by the IRQ core, while for legacy interrupts we will always return cpu_possible_map. [hch: updated to follow the style of pci_irq_vector()] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Link: http://lkml.kernel.org/r/1473862739-15032-6-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>