summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug/pciehp_hpc.c
AgeCommit message (Collapse)AuthorFilesLines
2018-07-19PCI: Handle error return from pci_reset_bridge_secondary_bus()Sinan Kaya1-2/+3
Commit 01fd61c0b9bd ("PCI: Add a return type for pci_reset_bridge_secondary_bus()") added a return value to the function to return if a device is accessible following a reset. Callers are not checking the value. Pass error code up high in the stack if device is not accessible. Fixes: 01fd61c0b9bd ("PCI: Add a return type for pci_reset_bridge_secondary_bus()") Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-06Merge branch 'pci/hotplug'Bjorn Helgaas1-13/+51
- fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) * pci/hotplug: PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: shpchp: Use dev_printk() for OSHP-related messages PCI: shpchp: Remove get_hp_hw_control_from_firmware() wrapper PCI: shpchp: Remove acpi_get_hp_hw_control_from_firmware() flags PCI: shpchp: Rely on previous _OSC results PCI: shpchp: Request SHPC control via _OSC when adding host bridge PCI: shpchp: Convert SHPC to be builtin only PCI: pciehp: Make pciehp_is_native() stricter PCI: pciehp: Rename host->native_hotplug to host->native_pcie_hotplug PCI: pciehp: Request control of native hotplug only if supported PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume PCI: pnv_php: Add missing of_node_put() PCI: pciehp: Add quirk for Command Completed errata PCI: Add Qualcomm vendor ID PCI: ibmphp: Fix use-before-set in get_max_bus_speed() # Conflicts: # drivers/acpi/pci_root.c
2018-05-23PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resumeMika Westerberg1-1/+12
After a suspend/resume cycle the Presence Detect or Data Link Layer Status Changed bits might be set. If we don't clear them those events will not fire anymore and nothing happens for instance when a device is now hot-unplugged. Fix this by clearing those bits in a newly introduced function pcie_reenable_notification(). This should be fine because immediately after, we check if the adapter is still present by reading directly from the status register. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org
2018-05-17PCI: Add generic pcie_wait_for_link() interfaceOza Pawandeep1-17/+3
Clients such as hotplug and Downstream Port Containment (DPC) both need to wait until a link becomes active or inactive. Add a generic pcie_wait_link_active() interface and use it instead of duplicating the code. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-05-07PCI: pciehp: Add quirk for Command Completed errataBjorn Helgaas1-12/+39
Several PCIe hotplug controllers have errata that mean they do not set the Command Completed bit unless writes to the Slot Command register change "Control" bits. Command Completed is never set for writes that only change software notification "Enable" bits. This results in timeouts like this: pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued 65284 msec ago) When this erratum is present, avoid these timeouts by marking commands "completed" immediately unless they change the "Control" bits. Here's the text of the Intel erratum CF118. We assume this applies to all Intel parts: CF118 PCIe Slot Status Register Command Completed bit not always updated on any configuration write to the Slot Control Register Problem: For PCIe root ports (devices 0 - 10) supporting hot-plug, the Slot Status Register (offset AAh) Command Completed (bit[4]) status is updated under the following condition: IOH will set Command Completed bit after delivering the new commands written in the Slot Controller register (offset A8h) to VPP. The IOH detects new commands written in Slot Control register by checking the change of value for Power Controller Control (bit[10]), Power Indicator Control (bits[9:8]), Attention Indicator Control (bits[7:6]), or Electromechanical Interlock Control (bit[11]) fields. Any other configuration writes to the Slot Control register without changing the values of these fields will not cause Command Completed bit to be set. The PCIe Base Specification Revision 2.0 or later describes the “Slot Control Register” in section 7.8.10, as follows (Reference section 7.8.10, Slot Control Register, Offset 18h). In hot-plug capable Downstream Ports, a write to the Slot Control register must cause a hot-plug command to be generated (see Section 6.7.3.2 for details on hot-plug commands). A write to the Slot Control register in a Downstream Port that is not hotplug capable must not cause a hot-plug command to be executed. The PCIe Spec intended that every write to the Slot Control Register is a command and expected a command complete status to abstract the VPP implementation specific nuances from the OS software. IOH PCIe Slot Control Register implementation is not fully conforming to the PCIe Specification in this respect. Implication: Software checking on the Command Completed status after writing to the Slot Control register may time out. Workaround: Software can read the Slot Control register and compare the existing and new values to determine if it should check the Command Completed status after writing to the Slot Control register. Per Sinan, the Qualcomm QDF2400 controller also does not set the Command Completed bit unless writes to the Slot Command register change "Control" bits. Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e7-v2-spec-update.html Link: https://lkml.kernel.org/r/8770820b-85a0-172b-7230-3a44524e6c9f@molgen.mpg.de Reported-by: Paul Menzel <pmenzel+linux-pci@molgen.mpg.de> # Lenovo X60 Tested-by: Paul Menzel <pmenzel+linux-pci@molgen.mpg.de> # Lenovo X60 Signed-off-by: Sinan Kaya <okaya@codeaurora.org> # Qcom quirk Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-02-01Merge branch 'pci/spdx' into nextBjorn Helgaas1-15/+1
* pci/spdx: PCI: Add SPDX GPL-2.0+ to replace implicit GPL v2 or later statement PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate PCI: Add SPDX GPL-2.0 to replace COPYING boilerplate PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate PCI: Add SPDX GPL-2.0 when no license was specified
2018-01-31Merge branch 'pci/misc' into nextBjorn Helgaas1-3/+2
* pci/misc: PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build PCI: Add wrappers for dev_printk() PCI: Remove unnecessary messages for memory allocation failures PCI: Add #defines for Completion Timeout Disable feature hinic: Replace PCI pool old API net: e100: Replace PCI pool old API block: DAC960: Replace PCI pool old API MAINTAINERS: Include more PCI files PCI: Remove unneeded kallsyms include powerpc/pci: Unroll two pass loop when scanning bridges powerpc/pci: Use for_each_pci_bridge() helper
2018-01-28PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplateBjorn Helgaas1-15/+1
Add SPDX GPL-2.0+ to all PCI files that specified the GPL and allowed either GPL version 2 or any later version. Remove the boilerplate GPL version 2 or later language, relying on the assertion in b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") that the SPDX identifier may be used instead of the full boilerplate text. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23PCI: pciehp: Assume NoCompl+ for Thunderbolt portsLukas Wunner1-0/+7
Certain Thunderbolt 1 controllers claim to support Command Completed events (value of 0b in the No Command Completed Support field of the Slot Capabilities register) but in reality they neither set the Command Completed bit in the Slot Status register nor signal a Command Completed interrupt: 8086:1513 CV82524 [Light Ridge 4C 2010] 8086:151a DSL2310 [Eagle Ridge 2C 2011] 8086:151b CVL2510 [Light Peak 2C 2010] 8086:1547 DSL3510 [Cactus Ridge 4C 2012] 8086:1548 DSL3310 [Cactus Ridge 2C 2012] 8086:1549 DSL2210 [Port Ridge 1C 2011] All known newer chips (Redwood Ridge and onwards) set No Command Completed Support, indicating that they do not support Command Completed events. The user-visible impact is that after unplugging such a device, 2 seconds elapse until pciehp is unbound. That's because on ->remove, pcie_write_cmd() is called via pcie_disable_notification() and every call to pcie_write_cmd() takes 2 seconds (1 second for each invocation of pcie_wait_cmd()): [ 337.942727] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x1038 (issued 21176 msec ago) [ 340.014735] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x0000 (issued 2072 msec ago) That by itself has always been unpleasant, but the situation has become worse with commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown"): Now pciehp is unbound on ->shutdown. Because Thunderbolt controllers typically have 4 hotplug ports, every reboot and shutdown is now delayed by 8 seconds, plus another 2 seconds for every attached Thunderbolt 1 device. Thunderbolt hotplug slots are not physical slots that one inserts cards into, but rather logical hotplug slots implemented in silicon. Devices appear beyond those logical slots once a PCI tunnel is established on top of the Thunderbolt Converged I/O switch. One would expect commands written to the Slot Control register to be executed immediately by the silicon, so for simplicity we always assume NoCompl+ for Thunderbolt ports. Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown") Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org # v4.12+ Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Yehezkel Bernat <yehezkel.bernat@intel.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Andreas Noever <andreas.noever@gmail.com>
2018-01-17PCI: Remove unnecessary messages for memory allocation failuresMarkus Elfring1-3/+2
Per ebfdc40969f2 ("checkpatch: attempt to find unnecessary 'out of memory' messages"), when a memory allocation fails, the memory subsystem emits generic "out of memory" messages (see slab_out_of_memory() for some of this logging). Therefore, additional error messages in the caller don't add much value. Remove messages that merely report "out of memory". This preserves some messages that report additional information, e.g., allocation failures that mean we drop hotplug events. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [bhelgaas: changelog, squash patches, make similar changes to acpiphp, cpqphp, ibmphp, keep warning when dropping hotplug event] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-06PCI: pciehp: Do not clear Presence Detect Changed during initializationMika Westerberg1-3/+8
It is possible that the hotplug event has already happened before the driver is attached to a PCIe hotplug downstream port. If we just clear the status we never get the hotplug interrupt and thus the event will be missed. To make sure that does not happen, we leave Presence Detect Changed bit untouched during initialization. Then once the event is unmasked we get an interrupt and handle the hotplug event properly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-06PCI: pciehp: Fix race condition handling surprise link downMika Westerberg1-1/+1
A surprise link down may retrain very quickly causing the same slot generate a link up event before handling the link down event completes. Since the link is active, the power off work queued from the first link down will cause a second down event when power is disabled. However, the link up event sets the slot state to POWERON_STATE before the event to handle this is enqueued, making the second down event believe it needs to do something. This creates constant link up and down event cycle. To prevent this it is better to handle each event at the time in order it occurred, so change the driver to use ordered workqueue instead. A normal device hotplug triggers two events (presense detect and link up) that are already handled properly in the driver but we currently log an error if we find an existing device in the slot. Since this is not an error change the log level to be debug instead to avoid scaring users. This is based on the original work by Ashok Raj. Link: https://patchwork.kernel.org/patch/9469023 Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-06PCI: pciehp: Convert timers to use timer_setup()Kees Cook1-8/+4
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. This fixes what appears to be a bug in passing the wrong pointer to the timer handler (address of ctrl pointer instead of ctrl pointer). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Mayurkumar Patel <mayurkumar.patel@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2017-08-15PCI: pciehp: Report power fault only once until we clear itKeith Busch1-0/+8
When a power fault occurs, the power controller sets Power Fault Detected in the Slot Status register, and pciehp_isr() queues an INT_POWER_FAULT event to handle it. It also clears Power Fault Detected, but since nothing has yet changed to correct the power fault, the power controller will likely set it again immediately, which may cause an infinite loop when pcie_isr() rechecks Slot Status. Fix that by masking off Power Fault Detected from new events if the driver hasn't seen the power fault clear from the previous handling attempt. Fixes: fad214b0aa72 ("PCI: pciehp: Process all hotplug events before looking for new ones") Signed-off-by: Keith Busch <keith.busch@intel.com> [bhelgaas: changelog, pull test out and add comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Mayurkumar Patel <mayurkumar.patel@intel.com> Cc: stable@vger.kernel.org # 4.9+
2016-12-07PCI: pciehp: Prioritize data-link event over presence detectAshok Raj1-9/+12
If Slot Status indicates changes in both Data Link Layer Status and Presence Detect, prioritize the Link status change. When both events are observed, pciehp currently relies on the Slot Status Presence Detect State (PDS) to agree with the Link Status Data Link Layer Active status. The Presence Detect State, however, may be set to 1 through out-of-band presence detect even if the link is down, which creates conflicting events. Since the Link Status accurately reflects the reachability of the downstream bus, the Link Status event should take precedence over a Presence Detect event. Skip checking the PDC status if we handled a link event in the same handler. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-09-22PCI: pciehp: Allow exclusive userspace control of indicatorsKeith Busch1-0/+27
PCIe hotplug supports optional Attention and Power Indicators, which are used internally by pciehp. Users can't control the Power Indicator, but they can control the Attention Indicator by writing to a sysfs "attention" file. The Slot Control register has two bits for each indicator, and the PCIe spec defines the encodings for each as (Reserved/On/Blinking/Off). For sysfs "attention" writes, pciehp_set_attention_status() maps into these encodings, so the only useful write values are 0 (Off), 1 (On), and 2 (Blinking). However, some platforms use all four bits for platform-specific indicators, and they need to allow direct user control of them while preventing pciehp from using them at all. Add a "hotplug_user_indicators" flag to the pci_dev structure. When set, pciehp does not use either the Attention Indicator or the Power Indicator, and the low four bits (values 0x0 - 0xf) of sysfs "attention" write values are written directly to the Attention Indicator Control and Power Indicator Control fields. [bhelgaas: changelog, rename flag and accessors to s/attention/indicator/] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-14PCI: pciehp: Clean up dmesg "Slot(%s)" messagesBjorn Helgaas1-6/+6
Print slot name consistently as "Slot(%s)". I don't know whether that's ideal, but we can at least do it the same way all the time. No functional change intended. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-09-14PCI: pciehp: Remove unnecessary guardBjorn Helgaas1-3/+0
In pcie_isr(), we return early if no status bits other than PCI_EXP_SLTSTA_CC are set. This was introduced by dbd79aed1aea ("pciehp: fix NULL dereference in interrupt handler"), but it is no longer necessary because all the subsequent pcie_isr() code is already predicated on a status bit being set. Remove the unnecessary test for ~PCI_EXP_SLTSTA_CC. No functional change intended. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-09-14PCI: pciehp: Don't re-read Slot Status when queuing hotplug eventMayurkumar Patel1-2/+5
Previously we read Slot Status to learn about hotplug events, then cleared the events, then re-read Slot Status to find out what happened. But Slot Status might have changed before the second read. Capture the Slot Status once before clearing the events. Also capture the Link Status if we had a link status change. [bhelgaas: changelog, split to separate patch] Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mayurkumar Patel <mayurkumar.patel@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-09-14PCI: pciehp: Process all hotplug events before looking for new onesMayurkumar Patel1-26/+32
Previously we accumulated hotplug events, then processed them, essentially like this: events = 0 do { status = read(Slot Status) status &= EVENT_MASK # only look at events events |= status # accumulate events write(Slot Status, events) # clear events } while (status) process events The problem is that as soon as we clear events in Slot Status, the hardware may send notifications for new events, and we lose information about the first events. For example, we might see two Presence Detect Changed events, but lose the fact that the slot was temporarily empty: read PCI_EXP_SLTSTA_PDC set, PCI_EXP_SLTSTA_PDS clear # slot empty write PCI_EXP_SLTSTA_PDC # clear PDC event read PCI_EXP_SLTSTA_PDC set, PCI_EXP_SLTSTA_PDS set # slot occupied The current code does not process a removal; it only processes the insertion, which fails because we didn't remove the original device. To avoid this problem, read Slot Status once and process all the events before reading it again, like this: do { read events clear events process events } while (events) [bhelgaas: changelog, add external loop around pciehp_isr()] Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mayurkumar Patel <mayurkumar.patel@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-09-14PCI: pciehp: Return IRQ_NONE when we can't read interrupt statusBjorn Helgaas1-1/+1
After 1469d17dd341 ("PCI: pciehp: Handle invalid data when reading from non-existent devices"), we returned IRQ_HANDLED when we failed to read interrupt status from the bridge. I think it's better to return IRQ_NONE, as we do in other cases where there's no interrupt pending. This will facilitate refactoring the loop in pcie_isr(): we'll be able to call the ISR in a loop as long as it returns IRQ_HANDLED. Return IRQ_NONE if we couldn't read interrupt status. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-09-12PCI: pciehp: Rename pcie_isr() locals for clarityBjorn Helgaas1-21/+25
Rename "detected" and "intr_loc" to "status" and "events" for clarity. "status" is the value we read from the Slot Status register; "events" is the set of hot-plug events we need to process. No functional change intended. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-06-20PCI: pciehp: Ignore interrupts during D3coldLukas Wunner1-0/+4
If a hotplug port is suspended to D3cold, its slot status register cannot be read. If that hotplug port happens to share its IRQ with other devices, whenever an interrupt occurs for one of these devices, pciehp logs a "no response from device" message and tries to read the PCI_EXP_SLTSTA register, even though we know that will fail. Ignore interrupts while we're in D3cold. [bhelgaas: changelog] Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-10PCI: pciehp: Remove ignored MRL sensor interrupt eventsBjorn Helgaas1-14/+3
We queued interrupt events for the MRL being opened or closed, but the code in interrupt_event_handler() that handles these events ignored them. Stop enabling MRL interrupts and remove the ignored events. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-10PCI: pciehp: Handle invalid data when reading from non-existent devicesJarod Wilson1-0/+17
It's platform-dependent, but an MMIO read to a non-existent PCI device generally returns data with all bits set. This happens when the host bridge or Root Complex times out waiting for a response from the device and fabricates return data to complete the CPU's read. One example, reported in the bugzilla below, involved this hierarchy: pci 0000:00:1c.0: PCI bridge to [bus 02-3a] Root Port pci 0000:02:00.0: PCI bridge to [bus 03-0a] Upstream Port pci 0000:03:03.0: PCI bridge to [bus 05-07] Downstream Port pci 0000:05:00.0: PCI bridge to [bus 06-07] Thunderbolt Upstream Port pci 0000:06:00.0: PCI bridge to [bus 07] Thunderbolt Downstream Port pci 0000:07:00.0: BCM57762 NIC Unplugging the Thunderbolt switch and the NIC below it resulted in this: pciehp 0000:03:03.0: Surprise Removal tg3 0000:07:00.0: tg3_abort_hw timed out, TX_MODE_ENABLE will not clear MAC_TX_MODE=ffffffff pciehp 0000:06:00.0: unloading service driver pciehp pciehp 0000:06:00.0: pcie_isr: intr_loc 11f pciehp 0000:06:00.0: Switch interrupt received pciehp 0000:06:00.0: Latch open on Slot pciehp 0000:06:00.0: Attention button interrupt received pciehp 0000:06:00.0: Button pressed on Slot pciehp 0000:06:00.0: Presence/Notify input change pciehp 0000:06:00.0: Card present on Slot pciehp 0000:06:00.0: Power fault interrupt received pciehp 0000:06:00.0: Data Link Layer State change pciehp 0000:06:00.0: Link Up event The pciehp driver correctly noticed that the Thunderbolt switch (05:00.0 and 06:00.0) and NIC (07:00.0) had been removed, and it called their driver remove methods. Since the NIC was already gone, tg3 received 0xffffffff when it tried to read from the device. The resulting timeout is a tg3 issue and not of interest here. Similarly, since the 06:00.0 Thunderbolt switch was already gone, pcie_isr() received 0xffff when it tried to read PCI_EXP_SLTSTA, and pciehp thought that was valid status showing that many events had happened: the latch had been opened, the attention button had been pressed, a card was now present, and the link was now up. These are all wrong, of course, but pciehp went on to try to power up and enumerate devices below the non-existent bridge: pciehp 0000:06:00.0: PCI slot - powering on due to button press pciehp 0000:06:00.0: Surprise Insertion pci 0000:07:00.0 id reading try 50 times with interval 20 ms to get ffffffff [bhelgaas: changelog, also check in pcie_poll_cmd() & pcie_do_write_cmd()] Link: https://bugzilla.kernel.org/show_bug.cgi?id=99841 Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-07-15PCI: pciehp: Simplify pcie_poll_cmd()Yijing Wang1-9/+5
Move first slot status read into while to simplify code. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-06-18PCI: pciehp: Inline the "handle event" functions into the ISRBjorn Helgaas1-9/+30
The pciehp_handle_*() functions (pciehp_handle_attention_button(), etc.) only contain a line or two of useful code, so it's clumsy to put them in separate functions. All they so is add an event to a work queue, and it's clearer to see that directly in the ISR. Inline them directly into pcie_isr(). No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rajat Jain <rajatja@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2015-06-17PCI: pciehp: Clean up debug loggingBjorn Helgaas1-44/+10
The pciehp debug logging is overly verbose and often redundant. Almost all of the information printed by dbg_ctrl() is also printed by the normal PCI core enumeration code and by pcie_init(). Remove the redundant debug info. When claiming a pciehp bridge, we print the slot characteristics, e.g., Slot #6 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+ Add the Hot-Plug Capable and Hot-Plug Surprise bits to this information, and print it all in the same order as lspci does. No functional change except the message text changes. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rajat Jain <rajatja@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2015-06-09PCI: pciehp: Wait for hotplug command completion where necessaryAlex Williamson1-14/+38
The commit referenced below deferred waiting for command completion until the start of the next command, allowing hardware to do the latching asynchronously. Unfortunately, being ready to accept a new command is the only indication we have that the previous command is completed. In cases where we need that state change to be enabled, we must still wait for completion. For instance, pciehp_reset_slot() attempts to disable anything that might generate a surprise hotplug on slots that support presence detection. If we don't wait for those settings to latch before the secondary bus reset, we negate any value in attempting to prevent the spurious hotplug. Create a base function with optional wait and helper functions so that pcie_write_cmd() turns back into the "safe" interface which waits before and after issuing a command and add pcie_write_cmd_nowait(), which eliminates the trailing wait for asynchronous completion. The following functions are returned to their previous behavior: pciehp_power_on_slot pciehp_power_off_slot pcie_disable_notification pciehp_reset_slot The rationale is that pciehp_power_on_slot() enables the link and therefore relies on completion of power-on. pciehp_power_off_slot() and pcie_disable_notification() need a wait because data structures may be freed after these calls and continued signaling from the device would be unexpected. And, of course, pciehp_reset_slot() needs to wait for the scenario outlined above. Fixes: 3461a068661c ("PCI: pciehp: Wait for hotplug command completion lazily") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.17+
2014-10-09Merge tag 'pci-v3.18-changes' of ↵Linus Torvalds1-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The interesting things here are: - Turn on Config Request Retry Status Software Visibility. This caused hangs last time, but we included a fix this time. - Rework PCI device configuration to use _HPP/_HPX more aggressively - Allow PCI devices to be put into D3cold during system suspend - Add arm64 PCI support - Add APM X-Gene host bridge driver - Add TI Keystone host bridge driver - Add Xilinx AXI host bridge driver More detailed summary: Enumeration - Check Vendor ID only for Config Request Retry Status (Rajat Jain) - Enable Config Request Retry Status when supported (Rajat Jain) - Add generic domain handling (Catalin Marinas) - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado) Resource management - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu) - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Move _HPP & _HPX handling into core (Bjorn Helgaas) - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas) - Apply _HPP/_HPX to display devices (Bjorn Helgaas) - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas) - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas) - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas) - Fix wait time in pciehp timeout message (Yinghai Lu) - Add more pciehp Slot Control debug output (Yinghai Lu) - Stop disabling pciehp notifications during init (Yinghai Lu) MSI - Remove arch_msi_check_device() (Alexander Gordeev) - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev) - Move D0 check into pci_msi_check_device() (Alexander Gordeev) - Remove unused kobject from struct msi_desc (Yijing Wang) - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang) - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang) - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang) - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang) - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang) Power management - Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki) - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki) AER - Add additional AER error strings (Gong Chen) - Make <linux/aer.h> standalone includable (Thierry Reding) Virtualization - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson) - Add ACS quirk for Intel 10G NICs (Alex Williamson) - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp) - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson) - Add device flag helpers (Ethan Zhao) - Assume all Mellanox devices have broken INTx masking (Gavin Shan) Generic host bridge driver - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau) - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau) - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau) - Fix the conversion of IO ranges into IO resources (Liviu Dudau) - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau) - Add support for parsing PCI host bridge resources from DT (Liviu Dudau) - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau) - Add arm64 architectural support for PCI (Liviu Dudau) APM X-Gene - Add APM X-Gene PCIe driver (Tanmay Inamdar) - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar) Freescale i.MX6 - Probe in module_init(), not fs_initcall() (Lucas Stach) - Delay enabling reference clock for SS until it stabilizes (Tim Harvey) Marvell MVEBU - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni) NVIDIA Tegra - Make sure the PCIe PLL is really reset (Eric Yuen) - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang) - Fix extended configuration space mapping (Peter Daifuku) - Implement resource hierarchy (Thierry Reding) - Clear CLKREQ# enable on port disable (Thierry Reding) - Add Tegra124 support (Thierry Reding) ST Microelectronics SPEAr13xx - Pass config resource through reg property (Pratyush Anand) Synopsys DesignWare - Use NULL instead of false (Fabio Estevam) - Parse bus-range property from devicetree (Lucas Stach) - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach) - Remove pci_assign_unassigned_resources() (Lucas Stach) - Check private_data validity in single place (Lucas Stach) - Setup and clear exactly one MSI at a time (Lucas Stach) - Remove open-coded bitmap operations (Lucas Stach) - Fix configuration base address when using 'reg' (Minghuan Lian) - Fix IO resource end address calculation (Minghuan Lian) - Rename get_msi_data() to get_msi_addr() (Minghuan Lian) - Add get_msi_data() to pcie_host_ops (Minghuan Lian) - Add support for v3.65 hardware (Murali Karicheri) - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand) TI Keystone - Add TI Keystone PCIe driver (Murali Karicheri) - Limit MRSS for all downstream devices (Murali Karicheri) - Assume controller is already in RC mode (Murali Karicheri) - Set device ID based on SoC to support multiple ports (Murali Karicheri) Xilinx AXI - Add Xilinx AXI PCIe driver (Srikanth Thokala) - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter) Miscellaneous - Clean up whitespace (Quentin Lambert) - Remove assignments from "if" conditions (Quentin Lambert) - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri) - x86: Mark DMI tables as initialization data (Mathias Krause) - x86: Move __init annotation to the correct place (Mathias Krause) - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause) - x86: Constify pci_mmcfg_probes[] array (Mathias Krause) - x86: Mark PCI BIOS initialization code as such (Mathias Krause) - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya) - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)" * tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits) arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: Add ACS quirk for AMD A88X southbridge devices PCI: xgene: Add APM X-Gene PCIe driver PCI: designware: Remove open-coded bitmap operations PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() ... Conflicts: arch/arm64/boot/dts/apm-storm.dtsi
2014-09-23PCI: pciehp: Stop disabling notifications during initYinghai Lu1-3/+0
During pciehp initialization, we previously wrote two hotplug commands: pciehp_probe pcie_init pcie_disable_notification pcie_write_cmd # command 1 pcie_init_notification pcie_enable_notification pcie_write_cmd # command 2 For controllers with errata like Intel CF118, we previously waited for a timeout before issuing the second hotplug command because the first command only updates interrupt enable bits and is not a "real" hotplug command, so the controller doesn't report Command Completed for it. But there's no need to disable notifications in the first place. If BIOS left them enabled, we could easily take an interrupt before disabling them, so there's no benefit in disabling them for the tiny window before we enable them. Drop the unnecessary pcie_disable_notification() call. [bhelgaas: changelog] Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e7-v2-spec-update.html Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-23PCI: pciehp: Add more Slot Control debug outputYinghai Lu1-1/+9
Add more Slot Control debug output and move one print after pcie_write_cmd() to be consistent with other debug output. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-23PCI: pciehp: Fix wait time in timeout messageYinghai Lu1-1/+1
When we warned about a timeout on a hotplug command, we previously printed the time between calls to pcie_write_cmd(), without accounting for any time spent actually waiting. Consider this sequence: pcie_write_cmd write SLTCTL cmd_started = jiffies # T1 pcie_write_cmd pcie_wait_cmd now = jiffies # T2 wait_event_timeout # we may wait here if (timeout) ctrl_info("Timeout on command issued %u msec ago", jiffies_to_msecs(now - cmd_started)) We previously printed (T2 - T1), but that doesn't include the time spent in wait_event_timeout(). Fix this by using the current jiffies value, not the one cached before calling wait_event_timeout(). [bhelgaas: changelog, use current jiffies instead of adding timeout] Fixes: 40b960831cfa ("PCI: pciehp: Compute timeout from hotplug command start time") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-22PCI: pciehp: Fix pcie_wait_cmd() timeoutYinghai Lu1-1/+1
pcie_poll_cmd() take msecs instead of jiffies, so convert timeout to msecs. Fixes: 40b960831cfa ("PCI: pciehp: Compute timeout from hotplug command start time") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-12PCI: pciehp: Reduce PCIe slot_ctrl to 16 bitsBjorn Helgaas1-1/+1
4283c70e91dc ("PCI: pciehp: Make pcie_wait_cmd() self-contained") added a cache of the most recent command written to the Slot Control register. This register is only 16 bits wide, but the cache ("slot_ctrl") is 32 bits. Reduce slot_ctrl to a u16 so it matches the register size. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-10PCI: Add pci_ignore_hotplug() to ignore hotplug events for a deviceBjorn Helgaas1-0/+12
Powering off a hot-pluggable device, e.g., with pci_set_power_state(D3cold), normally generates a hot-remove event that unbinds the driver. Some drivers expect to remain bound to a device even while they power it off and back on again. This can be dangerous, because if the device is removed or replaced while it is powered off, the driver doesn't know that anything changed. But some drivers accept that risk. Add pci_ignore_hotplug() for use by drivers that know their device cannot be removed. Using pci_ignore_hotplug() tells the PCI core that hot-plug events for the device should be ignored. The radeon and nouveau drivers use this to switch between a low-power, integrated GPU and a higher-power, higher-performance discrete GPU. They power off the unused GPU, but they want to remain bound to it. This is a reimplementation of f244d8b623da ("ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug") but extends it to work with both acpiphp and pciehp. This fixes a problem where systems with dual GPUs using the radeon drivers become unusable, freezing every few seconds (see bugzillas below). The resume of the radeon device may also fail, e.g., This fixes problems on dual GPU systems where the radeon driver becomes unusable because of problems while suspending the device, as in bug 79701: [drm] radeon: finishing device. radeon 0000:01:00.0: Userspace still has active objects ! radeon 0000:01:00.0: ffff8800cb4ec288 ffff8800cb4ec000 16384 4294967297 force free ... WARNING: CPU: 0 PID: 67 at /home/apw/COD/linux/drivers/gpu/drm/radeon/radeon_gart.c:234 radeon_gart_unbind+0xd2/0xe0 [radeon]() trying to unbind memory from uninitialized GART ! or while resuming it, as in bug 77261: radeon 0000:01:00.0: ring 0 stalled for more than 10158msec radeon 0000:01:00.0: GPU lockup ... radeon 0000:01:00.0: GPU pci config reset pciehp 0000:00:01.0:pcie04: Card not present on Slot(1-1) radeon 0000:01:00.0: GPU reset succeeded, trying to resume *ERROR* radeon: dpm resume failed radeon 0000:01:00.0: Wait for MC idle timedout ! Link: https://bugzilla.kernel.org/show_bug.cgi?id=77261 Link: https://bugzilla.kernel.org/show_bug.cgi?id=79701 Reported-by: Shawn Starr <shawn.starr@rogers.com> Reported-by: Jose P. <lbdkmjdf@sharklasers.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rajat Jain <rajatxjain@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> CC: stable@vger.kernel.org # v3.15+
2014-07-07PCI: pciehp: Clear Data Link Layer State Changed during initMyron Stowe1-1/+1
During PCIe hot-plug initialization - pciehp_probe() - data structures related to slot capabilities are set up. As part of this set up, ISRs are put in place to handle slot events and all event bits are cleared out. This patch adds the Data Link Layer State Changed (PCI_EXP_SLTSTA_DLLSC) Slot Status bit to the event bits that are cleared out during initialization. If the BIOS doesn't clear DLLSC before handoff to the OS, pciehp notices that it's set and interprets it as a new Link Up event, which results in spurious messages: pciehp 0000:82:04.0:pcie24: slot(4): Link Up event pciehp 0000:82:04.0:pcie24: Device 0000:83:00.0 already exists at 0000:83:00, cannot hot-add pciehp 0000:82:04.0:pcie24: Cannot add device at 0000:83:00 Prior to e48f1b67f668 ("PCI: pciehp: Use link change notifications for hot-plug and removal"), pciehp ignored DLLSC. Reference: PCI-SIG. PCI Express Base Specification Revision 4.0 Version 0.3 (PCI-SIG, 2014): 7.8.11. Slot Status Register (Offset 1Ah). [bhelgaas: add e48f1b67f668 ref and stable tag] Fixes: e48f1b67f668 ("PCI: pciehp: Use link change notifications for hot-plug and removal") Link: https://bugzilla.kernel.org/show_bug.cgi?id=79611 Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.15+
2014-07-05PCI: pciehp: Remove struct controller.no_cmd_completeRajat Jain1-10/+1
"no_cmd_complete" is only used once, and it duplicates read-only information we already have in the cached Slot Capabilities value. Remove the field and use the existing macro NO_CMD_CMPL() instead. [bhelgaas: changelog] Signed-off-by: Rajat Jain <rajatxjain@gmail.com> Signed-off-by: Rajat Jain <rajatjain@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-06-17PCI: pciehp: Remove assumptions about which commands cause completion eventsBjorn Helgaas1-30/+5
We use incorrect logic to decide whether a PCIe hotplug controller generates command completion events. 5808639bfa98 ("pciehp: fix slow probing") assumed that the Slot Status "Command Completed" bit was set only for commands affecting slot power, indicators, or electromechanical interlock. That assumption is false: per sec. 6.7.3.2 of PCIe spec r3.0, a write targeting any portion of the Slot Control register is a command, and (if command completed events are supported) software must wait for a command to complete before issuing the next command. 5808639bfa98 was to fix boot-time timeouts (see bugzilla below) on a Lenovo Thinkpad R61 with an Intel hotplug controller. The controller probably has the Intel CF118 erratum, which means it doesn't report Command Completed unless the Slot Control power, indicator, or interlock bits are changed. This causes a timeout because pciehp always waits for Command Complete (if supported), regardless of which bits are changed. Remove the incorrect logic because the timeouts have been addressed differently by these changes: PCI: pciehp: Wait for hotplug command completion lazily PCI: pciehp: Compute timeout from hotplug command start time Link: https://bugzilla.kernel.org/show_bug.cgi?id=10751 Tested-by: Rajat Jain <rajatxjain@gmail.com> (IDT 807a controller) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2014-06-17PCI: pciehp: Compute timeout from hotplug command start timeBjorn Helgaas1-5/+28
If we issue a hotplug command, go do something else, then come back and wait for the command to complete, we don't have to wait the whole timeout period, because some of it elapsed while we were doing something else. Keep track of the time we issued the command, and wait only until the timeout period from that point has elapsed. For controllers with errata like Intel CF118, we previously timed out before issuing the second hotplug command: At time T1 (during boot): - Write DLLSCE, ABPE, PDCE, etc. to Slot Control At time T2 (hotplug event): - Wait for command completion (CC) in Slot Status - Timeout at T2 + 1 second because CC is never set in Slot Status - Write PCC, PIC, etc. to Slot Control With this change, we wait until T1 + 1 second instead of T2 + 1 second. If the hotplug event is more than 1 second after the boot-time initialization, we won't wait for the timeout at all. We still emit a "Timeout on hotplug command" message if it timed out; we should see this on the first hotplug event on every controller with this erratum, as well as on real errors on controllers without the erratum. Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e7-v2-spec-update.html Tested-by: Rajat Jain <rajatxjain@gmail.com> (IDT 807a controller) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2014-06-17PCI: pciehp: Wait for hotplug command completion lazilyBjorn Helgaas1-4/+3
Previously we issued a hotplug command and waited for it to complete. But there's no need to wait until we're ready to issue the *next* command. The next command will probably be much later, so the first one may have already completed and we may not have to actually wait at all. Because of hardware errata, some controllers generate command completion events for some commands but not others. In the case of Intel CF118 (see spec update reference), the controller indicates command completion only for Slot Control writes that change the value of the following bits: Power Controller Control Power Indicator Control Attention Indicator Control Electromechanical Interlock Control Changes to other bits, e.g., the interrupt enable bits, do not cause the Command Completed bit to be set. Controllers from AMD and Nvidia are reported to have similar errata. These errata cause timeouts when pcie_enable_notification() enables interrupts. Previously that timeout occurred at boot-time. With this change, the timeout occurs later, when we change the state of the slot power, indicators, or interlock. This speeds up boot but causes a timeout at the first hotplug event on the slot. Subsequent events don't timeout because only the first (boot-time) hotplug command updates Slot Control without touching the power/indicator/interlock controls. Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e7-v2-spec-update.html Tested-by: Rajat Jain <rajatxjain@gmail.com> (IDT 807a controller) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2014-06-16PCI: pciehp: Make pcie_wait_cmd() self-containedBjorn Helgaas1-16/+17
pcie_wait_cmd() waits for the controller to finish a hotplug command. Move the associated logic (to determine whether waiting is required and whether we're using interrupts or polling) from pcie_write_cmd() to pcie_wait_cmd(). No functional change. Tested-by: Rajat Jain <rajatxjain@gmail.com> (IDT 807a controller) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2014-06-10PCI: Merge multi-line quoted stringsRyan Desfosses1-4/+2
Merge quoted strings that are broken across lines into a single entity. The compiler merges them anyway, but checkpatch complains about it, and merging them makes it easier to grep for strings. No functional change. [bhelgaas: changelog, do the same for everything under drivers/pci] Signed-off-by: Ryan Desfosses <ryan@desfo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-06-10PCI: Whitespace cleanupRyan Desfosses1-23/+23
Fix various whitespace errors. No functional change. [bhelgaas: fix other similar problems] Signed-off-by: Ryan Desfosses <ryan@desfo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-24PCI: pciehp: Acknowledge spurious "cmd completed" eventRajat Jain1-0/+2
In case of a spurious "cmd completed", pcie_write_cmd() does not clear it, but yet expects more "cmd completed" events to be generated. This does not happen because the previous (spurious) event has not been acknowledged. Fix that. Signed-off-by: Rajat Jain <rajatxjain@gmail.com> Signed-off-by: Rajat Jain <rajatjain@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-19PCI: pciehp: Remove a non-existent card, regardless of "surprise" capabilityRajat Jain1-4/+5
In case a card is physically yanked out, it should immediately be removed, regardless of the "surprise" capability bit. Thus: - Always handle the physical removal - regardless of the "surprise" bit. - Don't use "surprise" capability when making decisions about enabling presence detect notifications. - Reword the comments to indicate the intent. Signed-off-by: Rajat Jain <rajatxjain@gmail.com> Signed-off-by: Rajat Jain <rajatjain@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-11PCI: pciehp: Add hotplug_lock to serialize hotplug eventsRajat Jain1-0/+1
Today it is there is no protection around pciehp_enable_slot() and pciehp_disable_slot() to ensure that they complete before another hot-plug operation can be done on that particular slot. This patch introduces the slot->hotplug_lock to ensure that any hotplug operations (add / remove) complete before another hotplug event can begin processing on that particular slot. Signed-off-by: Rajat Jain <rajatxjain@gmail.com> Signed-off-by: Rajat Jain <rajatjain@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-11PCI: pciehp: Disable link notification across slot resetRajat Jain1-13/+17
Disable the link notification (in addition to presence detect notifications) across the slot reset since the reset could flap the link, and we don't want to treat it as hot unplug followed by a hotplug. Signed-off-by: Rajat Jain <rajatxjain@gmail.com> Signed-off-by: Rajat Jain <rajatjain@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-11PCI: pciehp: Don't disable the link permanently during removalRajat Jain1-18/+0
We need future link up events for hot-add, thus don't disable the link permanently during device removal. Also, remove the static functions that are now left unused. This reverts part of 2debd9289997 ("PCI: pciehp: Disable/enable link during slot power off/on"). This was discussed at the URL below, where it was revealed that it was done for a bug in a PCIe repeater chip on that particular platform. Link: https://lkml.kernel.org/r/CAErSpo72KZ-a2OSQLWoK71GCgwBt676XZdGt4tEYm-6UYnLmPw@mail.gmail.com Signed-off-by: Rajat Jain <rajatxjain@gmail.com> Signed-off-by: Rajat Jain <rajatjain@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-11PCI: pciehp: Enable link state change notificationsRajat Jain1-2/+11
Enable the Link state notifications unconditionally. Enable the presence detection notification only if attention button is absent. This was discussed at this thread: https://lkml.kernel.org/r/529E5C0E.80903@gmail.com Signed-off-by: Rajat Jain <rajatxjain@gmail.com> Signed-off-by: Rajat Jain <rajatjain@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-29 07:40:46 +0000