summaryrefslogtreecommitdiffstats
path: root/drivers/pci/host/pci-tegra.c
AgeCommit message (Collapse)AuthorFilesLines
2018-06-08PCI: Collect all native drivers under drivers/pci/controller/Shawn Lin1-2531/+0
Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-14PCI: Move private DT related functions into private headerRob Herring1-0/+2
The functions in linux/of_pci.h are primarily used by host bridge drivers, so they can be private to drivers/pci/. The remaining functions are still used mostly in host bridge drivers that still live in arch specific code. Hopefully someday, those will get moved into drivers/pci as well. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jingoo Han <jingoohan1@gmail.com>
2018-03-19PCI: tegra: Add power management supportManikanta Maddireddy1-67/+113
Tegra186 powergate driver is implemented as power domain driver, power partition ungate/gate are registered as power_on/power_off callback functions. There are no direct functions to power gate/ungate host controller in Tegra186. Host controller driver should add "power-domains" property in device tree and implement runtime suspend and resume callback functons. Power gate and ungate is taken care by power domain driver when host controller driver calls pm_runtime_put_sync and pm_runtime_get_sync respectively. Register suspend_noirq & resume_noirq callback functions to allow PCIe to come up after resume from RAM. Both runtime and noirq pm ops share same callback functions. Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> [lorenzo.pieralisi@arm.com: squashed patch to fix compilation] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com>
2018-03-02PCI: tegra: Add loadable kernel module supportManikanta Maddireddy1-3/+100
Implement remove callback function for Tegra PCIe driver to add loadable kernel module support. Per PCIe r3.0, sec 5.3.3.2.1, PCIe root port should broadcast PME_Turn_Off message before PCIe link goes to L2. PME_Turn_Off broadcast mechanism is implemented in AFI module. Each Tegra PCIe root port has its own PME_Turn_Off and PME_TO_Ack bitmap in AFI_PME register, program this register to broadcast PME_Turn_Off message. Once PME_TO_Ack is recieved driver will turn OFF PCIe clock, power gate PCIe partition and turn OFF regulators. Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com>
2018-03-02PCI: tegra: Free resources on probe failureManikanta Maddireddy1-20/+79
tegra_pcie_probe() can fail in multiple instances, this patch takes care of freeing the resources which are allocated before probe fail. Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com>
2018-02-01Merge branch 'pci/spdx' into nextBjorn Helgaas1-14/+1
* pci/spdx: PCI: Add SPDX GPL-2.0+ to replace implicit GPL v2 or later statement PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate PCI: Add SPDX GPL-2.0 to replace COPYING boilerplate PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate PCI: Add SPDX GPL-2.0 when no license was specified
2018-02-01Merge remote-tracking branch 'lorenzo/pci/tegra' into nextBjorn Helgaas1-122/+33
* lorenzo/pci/tegra: PCI: tegra: Use bus->sysdata to store and get host private data of: Export of_pci_range_to_resource() PCI: tegra: Refactor configuration space mapping code
2018-01-28PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplateBjorn Helgaas1-14/+1
Add SPDX GPL-2.0+ to all PCI files that specified the GPL and allowed either GPL version 2 or any later version. Remove the boilerplate GPL version 2 or later language, relying on the assertion in b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") that the SPDX identifier may be used instead of the full boilerplate text. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-15PCI: tegra: Use bus->sysdata to store and get host private dataManikanta Maddireddy1-4/+3
Tegra host driver is using pci_find_host_bridge() to get private data; this can be easily avoided by using bus->sysdata to store and get private data removing the pci_find_host_bridge() dependency. Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> [lorenzo.pieralisi@arm.com: rewrote commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2018-01-11PCI: tegra: Remove PCI_REASSIGN_ALL_BUS use on TegraManikanta Maddireddy1-1/+0
Bridge primary, secondary, and subordinate bus numbers power up as zero, and Tegra firmware doesn't program them. pci_scan_bridge_extend() automatically programs these bus numbers if they are zero, so we don't need to set the PCI_REASSIGN_ALL_BUS flag for Tegra. Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com>
2017-12-21PCI: tegra: Refactor configuration space mapping codeVidya Sagar1-118/+30
Use only 4 KiB space from the available 1 GiB PCIe aperture to access endpoint configuration space by dynamically moving the AFI_FPCI_BAR base address. This frees more space for mapping endpoint device BARs on some Tegra platforms. The ->add_bus() and ->remove_bus() callbacks are now no longer needed, so they can be removed. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> [treding@nvidia.com: various cleanups, update commit message] Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-12-18PCI: Remove PCI_REASSIGN_ALL_RSRC use on arm and arm64Bjorn Helgaas1-1/+1
On arm, PCI_REASSIGN_ALL_RSRC is used only in pcibios_assign_all_busses(), which helps decide whether to reconfigure bridge bus numbers. It has nothing to do with BAR assignments. On arm64 and powerpc, pcibios_assign_all_busses() tests PCI_REASSIGN_ALL_BUS, which makes more sense. Align arm with arm64 and powerpc, so they all use PCI_REASSIGN_ALL_BUS for pcibios_assign_all_busses(). Remove PCI_REASSIGN_ALL_RSRC from the generic, Tegra, Versatile, and R-Car drivers. These drivers are used only on arm or arm64, where PCI_REASSIGN_ALL_RSRC is not used after this change, so removing it should have no effect. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds1-27/+131
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-10-18PCI: tegra: Add Tegra186 PCIe supportManikanta Maddireddy1-25/+109
Add Tegra186 PCIe support. UPHY programming is performed by BPMP; PHY enable calls are not required for Tegra186 PCIe. Power partition ungate is done by BPMP powergate driver. The Tegra186 DT description must include a "power-domains" property, which results in dev->pm_domain being set. Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> [bhelgaas: add "power-domains" reference] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com>
2017-10-11PCI: tegra: Use generic accessors where possibleThierry Reding1-2/+22
The Tegra PCI host controller can generate configuration space accesses with byte, word and dword granularity for devices. Only root ports can't have their configuration space accessed in this way. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-10Revert "PCI: tegra: Do not allocate MSI target memory"Thierry Reding1-16/+6
This reverts commit d7bd554f27c942e6b8b54100b4044f9be1038edf. It turns out that Tegra20 has a bug in the implementation of the MSI target address register (which is worked around by the existence of the struct tegra_pcie_soc.msi_base_shift parameter) that restricts the MSI target memory to the lower 32 bits of physical memory on that particular generation. The offending patch causes a regression on TrimSlice, which is a Tegra20-based device and has a PCI network interface card. An initial, simpler fix was to change the MSI target address for Tegra20 only, but it was pointed out that the offending commit also prevents the use of 32-bit only MSI capable devices, even on later chips. Technically this was never guaranteed to work with the prior code in the first place because the allocated page could have resided beyond the 4 GiB boundary, but it is still possible that this could've introduced a regression. The proper fix that was settled on is to select a fixed address within the lowest 32 bits of physical address space that is otherwise unused, but testing of that patch has provided mixed results that are not fully understood yet. Given all of the above and the relative urgency to get this fixed in v4.13, revert the offending commit until a universal fix is found. Fixes: d7bd554f27c9 ("PCI: tegra: Do not allocate MSI target memory") Reported-by: Tomasz Maciej Nowak <tmn505@gmail.com> Reported-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # 4.13.x
2017-09-07Merge branch 'pci/misc' into nextBjorn Helgaas1-2/+1
* pci/misc: PCI: Fix PCIe capability sizes PCI: Convert to using %pOF instead of full_name() PCI: Constify endpoint pci_epf_type device_type PCI: Constify bin_attribute structures PCI: Constify hotplug pci_device_id structures PCI: Constify hotplug attribute_group structures PCI: Constify label attribute_group structures PCI: Constify sysfs attribute_group structures
2017-08-24PCI: Convert to using %pOF instead of full_name()Rob Herring1-2/+1
Now that we have a custom printf format specifier, convert users of full_name() to use %pOF instead. This is preparation for removing storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03PCI: tegra: Explicitly request exclusive reset controlPhilipp Zabel1-3/+3
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com>
2017-07-02PCI: tegra: Do not allocate MSI target memoryThierry Reding1-6/+16
The PCI host bridge found on Tegra SoCs doesn't require the MSI target address to be backed by physical system memory. Writes are intercepted within the controller and never make it to the memory pointed to. Since no actual system memory is required, remove the allocation of a single page and hardcode the MSI target address with a special address that maps to the last 4 KiB page within the range that is reserved for system memory and memory-mapped I/O in the FPCI address map. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2017-07-02PCI: tegra: Support MSI 64-bit addressingThierry Reding1-7/+6
The MSI target address can reside beyond the 32-bit boundary on devices with more than 2 GiB of system memory. The PCI host bridge on Tegra can easily support 64-bit addresses, so make sure to pass the upper 32 bits of the target address to endpoints when allocating MSI entries. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2017-07-02PCI: tegra: Drop pci_fixup_irqs()Lorenzo Pieralisi1-1/+2
Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now allocated in the pci_assign_irq() callback automatically, PCI host bridge drivers can stop relying on pci_fixup_irqs() for IRQ allocation Drop pci_fixup_irqs() usage from PCI tegra host bridge driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thierry Reding <thierry.reding@gmail.com>
2017-06-28PCI: Make pci_register_host_bridge() PCI core internalLorenzo Pieralisi1-3/+1
With the introduction of pci_scan_root_bus_bridge() there is no need to export pci_register_host_bridge() to other kernel subsystems other than the PCI compilation unit that needs it. Make pci_register_host_bridge() static to its compilation unit and convert the existing drivers usage over to pci_scan_root_bus_bridge(). Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Arnd Bergmann <arnd@arndb.de>
2017-06-28PCI: tegra: Fix host bridge memory leakageLorenzo Pieralisi1-1/+1
When probing the PCI host controller driver, if an error occurs, the probe function code does not free memory allocated for the struct pci_host_bridge resulting in memory leakage. Move the struct pci_host_bridge allocation over to the respective devm interface to fix the issue. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Arnd Bergmann <arnd@arndb.de>
2017-04-24PCI: tegra: Update PCI config space remap functionLorenzo Pieralisi1-2/+2
PCI configuration space should be mapped with a memory region type that generates on the CPU host bus non-posted write transations. Update the driver to use correct memory mapping attributes to map config space regions to enforce configuration space non-posted writes behaviour. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thierry Reding <thierry.reding@gmail.com>
2016-12-07PCI: tegra: Add Tegra210 supportThierry Reding1-8/+34
The PCIe host controller found on Tegra X1 is very similar to its predecessor on Tegra K1. A bug was introduced in the new revision that is worked around by always enabling the performance counter, otherwise accesses to configuration space will block for a number of seconds. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2016-12-07PCI: tegra: Implement PCA enable workaroundThierry Reding1-0/+13
Tegra210's PCIe controller has a bug that requires the PCA (performance counter) feature to be enabled. If this isn't done, accesses to device configuration space will hang the chip for tens of seconds. Implement the workaround. Based on commit 514e19138af2 ("pci: tegra: implement PCA enable workaround") from U-Boot by Stephen Warren <swarren@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2016-12-07PCI: tegra: Use new pci_register_host_bridge() interfaceArnd Bergmann1-51/+54
Tegra is one of the remaining platforms that still use the traditional pci_common_init_dev() interface for probing PCI host bridges. This demonstrates how to convert it to the pci_register_host interface I just added in a previous patch. This leads to a more linear probe sequence that can handle errors better because we avoid callbacks into the driver, and it makes the driver architecture independent. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2016-10-11PCI: tegra: Remove unused platform dataBjorn Helgaas1-1/+0
The tegra driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: tegra: Add local struct device pointersBjorn Helgaas1-112/+122
Use a local "struct device *dev" for brevity and consistency with other drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: tegra: Fix argument order in tegra_pcie_phy_disable()Bjorn Helgaas1-1/+1
The tegra_pcie_phy_disable() path called pads_writel() with arguments in the wrong order. Swap them to be the "value, offset" order expected by pads_writel(). Fixes: 6fe7c187e026 ("PCI: tegra: Support per-lane PHYs") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thierry Reding <treding@nvidia.com> CC: stable@vger.kernel.org # v4.7+
2016-10-05Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-artpec', ↵Bjorn Helgaas1-26/+21
'pci/host-designware', 'pci/host-hv', 'pci/host-keystone', 'pci/host-rcar', 'pci/host-rockchip', 'pci/host-tegra' and 'pci/host-xilinx' into next * pci/host-aardvark: PCI: aardvark: Remove redundant dev_err call in advk_pcie_probe() * pci/host-altera: PCI: altera: Remove redundant platform_get_resource() return value check PCI: altera: Move retrain from fixup to altera_pcie_host_init() PCI: altera: Rework config accessors for use without a struct pci_bus PCI: altera: Poll for link training status after retraining the link * pci/host-artpec: PCI: artpec6: Drop __init from artpec6_add_pcie_port() * pci/host-designware: PCI: designware: Remove redundant platform_get_resource() return value check PCI: designware: Exchange viewport of `MEMORYs' and `CFGs/IOs' PCI: designware: Keep viewport fixed for IO transaction if num_viewport > 2 PCI: designware: Check LTSSM training bit before deciding link is up PCI: designware: Add iATU Unroll feature PCI: designware: Wait for iATU enable PCI: designware: Move link wait definitions to .c file PCI: designware: Return data directly from dw_pcie_readl_rc() * pci/host-hv: PCI: hv: Handle hv_pci_generic_compl() error case PCI: hv: Handle vmbus_sendpacket() failure in hv_compose_msi_msg() PCI: hv: Remove the unused 'wrk' in struct hv_pcibus_device PCI: hv: Use pci_function_description[0] in struct definitions PCI: hv: Use zero-length array in struct pci_packet PCI: hv: Use list_move_tail() instead of list_del() + list_add_tail() * pci/host-keystone: PCI: keystone: Propagate request_irq() failure * pci/host-rcar: PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot PCI: rcar: Fix some checkpatch warnings PCI: rcar: Add multi-MSI support PCI: rcar: Don't disable/unprepare clocks on prepare/enable failure PCI: rcar: Consolidate register space lookup and ioremap * pci/host-rockchip: PCI: rockchip: Fix wrong transmitted FTS count PCI: rockchip: Improve the deassert sequence of four reset pins PCI: rockchip: Increase the Max Credit update interval PCI: rockchip: Add Rockchip PCIe controller support dt-bindings: PCI: rockchip: Add DT bindings for Rockchip PCIe controller * pci/host-tegra: PCI: tegra: Use of_device_get_match_data() PCI: tegra: Remove redundant _data suffix * pci/host-xilinx: microblaze/PCI: Add multidomain support for procfs PCI: xilinx: Dispose of MSI virtual IRQ PCI: xilinx: Clear correct MSI set bit PCI: xilinx: Clear interrupt register for invalid interrupt PCI: xilinx: Keep both legacy and MSI interrupt domain references PCI: xilinx-nwl: Enable all MSI interrupts using MSI mask PCI: xilinx-nwl: Expand error logging Conflicts: drivers/pci/host/pcie-xilinx.c
2016-09-06PCI: tegra: Fix pci_remap_iospace() failure pathLorenzo Pieralisi1-2/+5
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped IO, by reserving a chunk of virtual address space starting at PCI_IOBASE and by mapping the PCI host bridges memory address space driving PCI IO cycles to it. PCI host bridge drivers that enable downstream PCI IO cycles map the host bridge memory address responding to PCI IO cycles to the fixed virtual address space through the pci_remap_iospace() API. This means that if the pci_remap_iospace() function fails, the corresponding host bridge PCI IO resource must be considered invalid, in that there is no way for the kernel to actually drive PCI IO transactions if the memory addresses responding to PCI IO cycles cannot be mapped into the CPU virtual address space. The PCI tegra host bridge driver adds the PCI IO resource retrieved from firmware to the host bridge resource windows even if the pci_remap_iospace() call fails; this is an actual bug in that the PCI host bridge would consider the PCI IO resource valid (and possibly assign it to downstream devices) even if the kernel was not able to map the PCI host bridge memory address driving IO cycle to the CPU virtual address space (ie pci_remap_iospace() failures). Add the PCI host bridge driver pci_remap_iospace() failure path and do not add the corresponding PCI host bridge PCI IO resources retrieved through firmware when the pci_remap_iospace() function call fails, fixing the issue. Fixes: e6e9f471f5fe ("PCI: tegra: Use generic pci_remap_iospace() rather than ARM32-specific one") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Thierry Reding <treding@nvidia.com>
2016-08-18PCI: tegra: Use of_device_get_match_data()Thierry Reding1-6/+1
of_device_get_match_data() was added in v4.2 to reduce the the boilerplate required to get at SoC-specific data. Use it to simplify the code slightly. [bhelgaas: changelog] Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-18PCI: tegra: Remove redundant _data suffixThierry Reding1-21/+21
The struct tegra_pcie_soc_data represents SoC-specific data. The shorter name tegra_pcie_soc already describes that accurately enough, so the extra five characters are redundant. Also remove the suffix from various variable names to shorten the code a little. This also makes this driver more consistent with the naming used in other drivers that use a similar mechanism to differentiate between various SoC generations. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-01Merge branch 'pci/host-tegra' into nextBjorn Helgaas1-30/+25
* pci/host-tegra: PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values PCI: tegra: Program PADS_REFCLK_CFG* always, not just on legacy SoCs PCI: tegra: Stop setting pcibios_min_mem PCI: tegra: Use generic pci_remap_iospace() rather than ARM32-specific one PCI: tegra: Use lower-case hex consistently for register definitions Conflicts: drivers/pci/host/pci-tegra.c Drop stray pci_ioremap_io() per Thierry Reding <treding@nvidia.com>; removal tested by Jon Hunter <jonathanh@nvidia.com>.
2016-08-01Merge branches 'pci/demodularize-hosts' and 'pci/host-request-windows' into nextBjorn Helgaas1-37/+9
* pci/demodularize-hosts: PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: artpec: Add Axis ARTPEC-6 PCIe controller driver PCI: Add DT binding for Axis ARTPEC-6 PCIe controller PCI: generic: Select IRQ_DOMAIN * pci/host-request-windows: PCI: versatile: Simplify host bridge window iteration PCI: versatile: Request host bridge window resources with core function PCI: tegra: Request host bridge window resources with core function PCI: tegra: Remove top-level resource from hierarchy PCI: rcar: Simplify host bridge window iteration PCI: rcar: Request host bridge window resources with core function PCI: rcar Gen2: Request host bridge window resources PCI: rcar: Drop gen2 dummy I/O port region ARM: Make PCI I/O space optional PCI: mvebu: Request host bridge window resources with core function PCI: generic: Simplify host bridge window iteration PCI: generic: Request host bridge window resources with core function PCI: altera: Simplify host bridge window iteration PCI: altera: Request host bridge window resources with core function PCI: xilinx-nwl: Use dev_printk() when possible PCI: xilinx-nwl: Request host bridge window resources PCI: xilinx-nwl: Free bridge resource list on failure PCI: xilinx: Request host bridge window resources PCI: xilinx: Free bridge resource list on failure PCI: xgene: Request host bridge window resources PCI: xgene: Free bridge resource list on failure PCI: iproc: Request host bridge window resources PCI: designware: Simplify host bridge window iteration PCI: designware: Request host bridge window resources PCI: designware: Free bridge resource list on failure PCI: Add devm_request_pci_bus_resources()
2016-08-01PCI: tegra: Make explicitly non-modularPaul Gortmaker1-7/+4
This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCI_TEGRA drivers/pci/host/Kconfig: bool "NVIDIA Tegra PCIe controller" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Replace module_platform_driver() with builtin_platform_driver(), which uses the same init level priority, so init ordering is unchanged. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-tegra@vger.kernel.org
2016-07-26PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC valuesStephen Warren1-13/+8
The value that should be programmed into the PADS_REFCLK register varies per SoC. Fix the Tegra PCIe driver to program the correct values. Future SoCs will require different values in cfg0/1, so the two values are stored separately in the per-SoC data structures. For reference, the values are all documented in NV bug 1771116 comment 20. The ASIC team has validated all these values, except for the Tegra20 value which is simply left unchanged in this patch. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thierry Reding <treding@nvidia.com>
2016-07-26PCI: tegra: Program PADS_REFCLK_CFG* always, not just on legacy SoCsStephen Warren1-6/+9
tegra_pcie_phy_power_on() calls tegra_pcie_phy_enable() only for legacy SoCs. However, part of tegra_pcie_phy_enable() needs to happen in all cases. Move that code up one level into tegra_pcie_phy_power_on(). [bhelgaas: changelog] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-25PCI: tegra: Stop setting pcibios_min_memThierry Reding1-2/+0
pcibios_min_mem only exists on 32-bit ARM, so using it in pci-tegra.c prevents the driver from being used on other arches. In __pci_assign_resource(), we clip the available area based on PCIBIOS_MIN_MEM. On 32-bit ARM, this is pcibios_min_mem, with a default value of 0x01000000. For Tegra, we discover the space available for PCI resource allocation from the device tree, and the lowest address that will ever be available is 0x12000000 (on Tegra124). The Tegra windows are always higher than the default pcibios_min_mem, so the __pci_assign_resource() has no effect, so there's no need to adjust pcibios_min_mem here. [bhelgaas: changelog] Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-25PCI: tegra: Use generic pci_remap_iospace() rather than ARM32-specific oneThierry Reding1-1/+1
Use the pci_remap_iospace() function provided by the PCI core, rather than the 32-bit ARM-specific pci_ioremap_io(). Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-25PCI: tegra: Use lower-case hex consistently for register definitionsThierry Reding1-11/+11
Most of the register definitions use lowercase hexadecimal values, with a few exceptions using uppercase. Convert the latter to be more in line with the former. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-25PCI: tegra: Request host bridge window resources with core functionBjorn Helgaas1-12/+4
Use devm_request_pci_bus_resources() to request host bridge window resources instead of doing it by hand in the driver. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-25PCI: tegra: Remove top-level resource from hierarchyBjorn Helgaas1-20/+3
41534e53786d ("PCI: tegra: Implement a proper resource hierarchy") did two things: 1) It added a top-level resource that encloses all resources declared in the DT description, including registers and bridge apertures, and 2) It requested the bridge apertures, which means the PCI core can track the resources used by PCI devices below the bridge. The latter is necessary, but the former is questionable because there's no guarantee that the bridge registers and the apertures are contiguous. In this example: # cat /proc/iomem 00000000-3fffffff : /pcie-controller@00003000 00000000-00000fff : /pcie-controller@00003000/pci@1,0 00003000-000037ff : pads 00003800-000039ff : afi 10000000-1fffffff : cs the resource tree claims that [mem 0x00003a00-0x0fffffff] is consumed by /pcie-controller@00003000, but it's not mentioned in the DT, and it might actually be used by other devices. Remove the top-level resource so we don't claim more than the device actually consumes. This reintroduces the problem that we can't match the resources, e.g., "pads", "afi", "cs", etc., to the DT device. I think this should be solved by having the DT core request all resources of all devices in the DT (it does not do that today). If a driver claims the device, it can request the resources it uses. For example: # cat /proc/iomem 00000000-00000fff : /pcie-controller@00003000 00000000-00000fff : /pcie-controller@00003000/pci@1,0 00003000-000037ff : /pcie-controller@00003000 00003000-000037ff : pads 00003800-000039ff : /pcie-controller@00003000 00003800-000039ff : afi 10000000-1fffffff : /pcie-controller@00003000 10000000-1fffffff : cs ... Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-04-29PCI: tegra: Support per-lane PHYsThierry Reding1-17/+227
The current XUSB pad controller bindings are insufficient to describe PHY devices attached to USB controllers. New bindings have been created to overcome these restrictions. As a side-effect each root port now is assigned a set of PHY devices, one for each lane associated with the root port. This has the benefit of allowing fine-grained control of the power management for each lane. Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-08PCI: tegra: Remove misleading PHYS_OFFSETThierry Reding1-1/+1
BARs are disabled when the size register is 0, so it's misleading to write a base address into the start register. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: tegra: Track bus -> CPU mappingThierry Reding1-0/+28
Track the offsets of the bus -> CPU mapping for I/O and memory. This is cosmetic for current Tegra chips because the offset is always 0. But to properly support legacy use-cases, like VGA, this would be needed so that PCI bus addresses can be relocated. While at it, also request the I/O resource both in physical memory and I/O space to make /proc/iomem consistent, as well as add the I/O region to the list of host bridge resources. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: tegra: Remove unused struct tegra_pcie.num_ports fieldThierry Reding1-1/+0
The num_ports field of the tegra_pcie structure is never used so remove it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: tegra: Implement ->{add,remove}_bus() callbacksThierry Reding1-20/+34
The configuration space mapping on Tegra is somewhat special, and in order to avoid wasting virtual address space the configuration space for each bus needs to be stitched together from several blocks which form a single continuous virtual address range for accessors. Currently the configuration space is mapped upon the first access to one of its registers. However, the mapping operation may sleep under certain circumstances, so doing it from the configuration space accessors (they are protected by a spin lock) will trigger a warning. To avoid the warning, use the ->add_bus() callback to perform the mapping at enumeration time when the operation is allowed to sleep. Also add an implementation of ->remove_bus() that undoes the mapping established by the ->add_bus() callback. While it isn't currently possible to unload the module, there is work underway to remedy this, and this code will come in handy when that happens. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 05:46:21 +0000