summaryrefslogtreecommitdiffstats
path: root/drivers/pci/controller
AgeCommit message (Collapse)AuthorFilesLines
2022-08-01PCI: dwc: Simplify in/outbound iATU setup methodsSerge Semin3-237/+108
Previously __dw_pcie_prog_outbound_atu() duplicated a lot of code between the iatu_unroll_enabled version and the PCIE_ATU_VIEWPORT version: __dw_pcie_prog_outbound_atu if (iatu_unroll_enabled) dw_pcie_prog_outbound_atu_unroll dw_pcie_writel_ob_unroll(PCIE_ATU_UNR_LOWER_BASE, ...) dw_pcie_writel_ob_unroll(PCIE_ATU_UNR_UPPER_BASE, ...) ... return dw_pcie_writel_dbi(PCIE_ATU_VIEWPORT, ...) dw_pcie_writel_dbi(PCIE_ATU_LOWER_BASE, ...) dw_pcie_writel_dbi(PCIE_ATU_UPPER_BASE, ...) ... Unify those by pushing the unroll address computation and viewport selection down into dw_pcie_writel_atu() so we can use the same dw_pcie_writel_atu_ob() accessor for both paths: __dw_pcie_prog_outbound_atu dw_pcie_writel_atu_ob(PCIE_ATU_LOWER_BASE, ...) dw_pcie_writel_atu dw_pcie_select_atu # new if (iatu_unroll_enabled) return pci->atu_base + PCIE_ATU_UNROLL_BASE(...) dw_pcie_writel_dbi(PCIE_ATU_VIEWPORT, ...) return pci->atu_base dw_pcie_write(base + reg) dw_pcie_writel_atu_ob(PCIE_ATU_UPPER_BASE, ...) ... In the non-unroll case, this does involve more MMIO writes to PCIE_ATU_VIEWPORT, but it's mainly in initialization paths and the code simplification is significant. [bhelgaas: commit log, simplify dw_pcie_select_atu()] Link: https://lore.kernel.org/r/20220624143947.8991-12-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: dwc: Drop enum dw_pcie_region_type in favor of PCIE_ATU_REGION_DIR_IB/OBSerge Semin4-34/+13
Previously callers of dw_pcie_disable_atu() supplied enum dw_pcie_region_type (DW_PCIE_REGION_INBOUND, DW_PCIE_REGION_OUTBOUND), which dw_pcie_disable_atu() converted to the PCIE_ATU_REGION_DIR_IB or PCIE_ATU_REGION_DIR_OB values needed to program the ATU registers. Simplify the code by dropping the dw_pcie_region_type enum and passing PCIE_ATU_REGION_DIR_IB or PCIE_ATU_REGION_DIR_OB directly. Reorder dw_pcie_disable_atu() arguments to (dir, index) since "index" indicates an ATU window in the regions of the corresponding direction. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Drop enum dw_pcie_as_type in favor of PCIE_ATU_TYPE_MEM/IOSerge Semin3-50/+15
Previously dw_pcie_ep_set_bar() converted the BAR PCI_BASE_ADDRESS_SPACE bit to the internal dw_pcie_as_type enum (DW_PCIE_AS_MEM, DW_PCIE_AS_IO) and passed it down to dw_pcie_prog_inbound_atu(), which converted the enum to the PCIE_ATU_TYPE_MEM/PCIE_ATU_TYPE_IO values needed to program the ATU registers. Simplify the code by dropping the dw_pcie_as_type enum and passing PCIE_ATU_TYPE_MEM or PCIE_ATU_TYPE_IO directly. Reorder inbound ATU function arguments to match the outbound functions, with address-related parameters at the end. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-10-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Add dw_pcie_ops.host_deinit() callbackSerge Semin2-5/+17
dw_pcie_host_init() calls the dw_pcie_ops.host_init() callback to do platform-specific host initialization. Add a dw_pcie_ops.host_deinit() callback to perform the corresponding cleanups in dw_pcie_host_deinit() and in dw_pcie_host_init() failure paths. Link: https://lore.kernel.org/r/20220624143947.8991-9-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: tegra194: Drop manual DW PCIe controller version setupSerge Semin1-1/+0
Since the DW PCIe common code (dw_pcie_version_detect()) now reads the IP core version directly from the hardware, there is no point manually setting the version for controllers newer than v4.70a. Tegra194 only supports v4.90a, so remove the now-superfluous code that sets struct dw_pcie.version. Suggested-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220624143947.8991-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: intel-gw: Drop manual DW PCIe controller version setupSerge Semin1-15/+1
Since the DW PCIe common code (dw_pcie_version_detect()) now reads the IP core version directly from the hardware, there is no point manually setting the version for controllers newer than v4.70a. Remove the now-superfluous intel-gw code that sets struct dw_pcie.version. Suggested-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220624143947.8991-7-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Add macros to compare Synopsys IP core versionsSerge Semin3-5/+20
Add macros to compare DWC IP core versions: dw_pcie_ver_is() dw_pcie_ver_is_ge() dw_pcie_ver_type_is() dw_pcie_ver_type_is_ge() These are along the lines of DWC3_VER_IS() and dw_spi_ver_is(). [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-08-01PCI: dwc: Read DWC IP core version from registerSerge Semin4-0/+34
Since DWC PCIe v4.70a, the controller version and version type can be read from the PORT_LOGIC.PCIE_VERSION_OFF and PORT_LOGIC.PCIE_VERSION_TYPE_OFF registers respectively. Read the version from those registers and warn if if's different from the version we got from the device tree. We can only read the version after platform-specific drivers have done any DBI-related initialization, such as reference clock activation. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Use native DWC IP core version representationSerge Semin5-14/+22
Save the DWC IP core version in the same format as the PORT_LOGIC.PCIE_VERSION_OFF register, similar to what other drivers for DWC IP do (dw_spi_hw_init(), dwc3_core_is_valid(), stmmac_hwif_init()). [bhelgaas: trim commit log] Link: https://lore.kernel.org/r/20220624143947.8991-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Detect iATU settings after getting "addr_space" resourceSerge Semin1-2/+2
Previously, dw_pcie_ep_init() did: dw_pcie_iatu_detect(pci); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space"); if (!res) return -EINVAL; The platform_get_resource_byname() can fail, and dw_pcie_iatu_detect() doesn't depend on the "addr_space" resource, so delay it until afterwards, i.e., platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space"); dw_pcie_iatu_detect(pci); [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Log link speed and width if it comes upSerge Semin1-6/+16
Printing just "link up" isn't very informative for PCI Express. Even if the link is up, bus performance can degrade to slower speeds or to narrower width than both Root Port and its partner is capable of. In that case it would be handy to know the link specifications as early as possible. If the link comes up, log the link speed (PCIe generation) and width. Link: https://lore.kernel.org/r/20220624143947.8991-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-07-29PCI: qcom: Allow ASPM L1 and substates for 2.7.0Krishna chaitanya chundru1-0/+8
Allow ASPM L1 and its substates. By default this is disabled in the qcom specific hardware. Enable it explicitly only for controllers belonging to 2_7_0. This does not affect any link capability registers; it will allow the link transitions to L1 and its substates only if they are already supported. Link: https://lore.kernel.org/r/1657886366-32685-1-git-send-email-quic_krichai@quicinc.com Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-27PCI: Convert to new *_PM_OPS macrosBjorn Helgaas10-42/+35
Replace SET_*_PM_OPS with *_PM_OPS, which which have the advantage that the compiler always sees the PM callbacks as referenced, so they don't need to be wrapped with "#ifdef CONFIG_PM_SLEEP" or tagged with "__maybe_unused" to avoid "defined but not used" warnings. See 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate old ones"). Link: https://lore.kernel.org/r/20220719215108.1583108-1-helgaas@kernel.org Tested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pali Rohár <pali@kernel.org> # pci-mvebu.c Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2022-07-27PCI: brcmstb: Rename .map_bus() functions to end with 'map_bus'Jim Quinlan1-8/+8
Rename the .map_bus() functions to end with 'map_bus' so they're easy to find with, e.g., 'git grep "^static.*_map_bus" drivers/pci/'. [bhelgaas: rename brcm_pcie_map_bus32() to brcm7425_pcie_map_bus() for better cscope-ability (".*_map_bus" is not the same as ".*_map_bus.*")] Link: https://lore.kernel.org/r/20220725151258.42574-8-jim2101024@gmail.com Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com>
2022-07-27PCI: brcmstb: Disable/enable regulators in suspend/resumeJim Quinlan1-5/+59
If we found power regulators for a device below the Root Port, disable them during suspend and re-enable them during resume. If any downstream device can be a wakeup device, do not turn off the regulators as the device will need them on. [bhelgaas: drop unused regulator_oops, skip wrapping of .add_bus()/ .remove_bus(), move brcm_pcie_start_link() to .add_bus() in previous patch, squash WOL checking into this patch] Link: https://lore.kernel.org/r/20220725151258.42574-6-jim2101024@gmail.com Link: https://lore.kernel.org/r/20220725151258.42574-7-jim2101024@gmail.com Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com>
2022-07-27PCI: brcmstb: Enable child bus device regulators from DTJim Quinlan1-5/+98
Some platforms have power regulators for slots or devices below Root Ports. On platforms like Raspberry Pi 4, these regulators are described in the Root Port device tree node, since they logically belong to the Root Port, not to the host bridge itself. Add an .add_bus() hook (called when pci_alloc_child_bus() allocates the secondary ("child") bus for a bridge), and look for such regulators. If we find some, enable them before bringing up the link and enumerating devices on the child bus. Similarly, when pci_remove_bus() calls the ops->remove_bus() hook, disable the regulators. The regulators that may be described in a Root Port DT device are: vpcie3v3 vpcie3v3aux vpcie12v These control power to the device downstream from the Root Port. [bhelgaas: commit log, name hooks brcm_pcie_add_bus(), etc, since we only support one set of subregulator info, save info in struct brcm_pcie instead of dev->driver_data, move brcm_pcie_start_link() from probe to .add_bus() (from subsequent patch)] Link: https://lore.kernel.org/r/20220725151258.42574-5-jim2101024@gmail.com Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com>
2022-07-27PCI: brcmstb: Split post-link up initialization to brcm_pcie_start_link()Jim Quinlan1-47/+64
Previously brcm_pcie_setup() initialized the Root Port itself as well as doing the actual link-up. Split brcm_pcie_setup() into two functions: - brcm_pcie_setup(), which initializes everything that does not require the link itself to be up, and - brcm_pcie_start_link(), which brings up the link and initializes things that depend on the link being up. [bhelgaas: condense commit log, deferring details for future changes] Link: https://lore.kernel.org/r/20220725151258.42574-3-jim2101024@gmail.com Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com>
2022-07-27PCI: brcmstb: Prevent config space access when link is downJim Quinlan1-6/+14
When the link is down, config accesses to downstream devices cause CPU aborts. Allow config accesses only when the link is up. As the following scenario shows, this check is racy and cannot completely avoid CPU aborts, but it makes them less likely: pci_generic_config_read addr = brcm_pcie_map_conf # bus->ops->map_bus() brcm_pcie_link_up # returns "true"; link is up <link goes down> *val = readb(addr) # link is now down <CPU abort> Note that config space accesses to the Root Port are not affected by link status. [bhelgaas: commit log, use PCIE_ECAM_REG() instead of magic 0xfff masks; note that pci_generic_config_read32() masks low two bits already] Link: https://lore.kernel.org/r/20220725151258.42574-4-jim2101024@gmail.com Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com>
2022-07-27PCI: brcmstb: Remove unnecessary forward declarationsJim Quinlan1-77/+72
Remove forward function declarations in this driver. Also move some constant structure definitions lower in the file. There are no changes to the code that has been moved. Link: https://lore.kernel.org/r/20220725151258.42574-2-jim2101024@gmail.com Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com>
2022-07-22PCI: tegra194: Add Tegra234 PCIe supportVidya Sagar1-59/+225
Add support for Synopsys DesignWare core IP based PCIe host controllers present in the Tegra234 SoC. Link: https://lore.kernel.org/r/20220721142052.25971-17-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Extend Endpoint mode supportVidya Sagar1-0/+9
Since only Controller-5 can be used in the Endpoint mode in P2972-0000 platform, support is available only for Controller-5. Extend that support by enabling the Endpoint mode capable controller during initialization which otherwise is not required if it is only Controller-5. Link: https://lore.kernel.org/r/20220721142052.25971-16-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Fix link up retry sequenceVidya Sagar1-1/+1
Add the missing DLF capability offset while clearing DL_FEATURE_EXCHANGE_EN bit during link up retry. Link: https://lore.kernel.org/r/20220721142052.25971-15-vidyas@nvidia.com Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Clean up the exit path for Endpoint modeVidya Sagar1-14/+31
Clean up the exit path during .remove() and .shutdown() calls when in Endpoint mode. Link: https://lore.kernel.org/r/20220721142052.25971-14-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Enable support for 256 Byte payloadVidya Sagar1-0/+13
Set 256 byte payload as the default in the Device Control Register to allow the PCIe subsystem to enable 256 byte Max Payload Size when a capable link partner is connected. Link: https://lore.kernel.org/r/20220721142052.25971-13-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Clear bandwidth management statusVidya Sagar1-0/+6
In the event of a bandwidth management interrupt, clear the bandwidth management status in the configuration space also along with clearing corresponding status in the application logic register to avoid slew of interrupts. Link: https://lore.kernel.org/r/20220721142052.25971-12-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Fix Root Port interrupt handlingVidya Sagar1-24/+22
As part of Root Port interrupt handling, level-0 register is read first and based on the bits set in that, corresponding level-1 registers are read for further interrupt processing. Since both these values are currently read into the same 'val' variable, checking level-0 bits the second time around is happening on the 'val' variable value of level-1 register contents instead of freshly reading the level-0 value again. Fix by using different variables to store level-0 and level-1 registers contents. Link: https://lore.kernel.org/r/20220721142052.25971-11-vidyas@nvidia.com Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Find RAS DES PCIe capability offsetVidya Sagar2-37/+35
Find RAS DES PCIe capability offset instead of hardcoding the offset for each controller. Link: https://lore.kernel.org/r/20220721142052.25971-10-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie"Vidya Sagar1-111/+111
This reverts commit b572569183993b68dec0e990b33641e6f77744ba. Revert b57256918399 ("PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie") to keep the names of data structures generic and not contain any one particular chip name. This is a preparatory change for the upcoming changes that add support for Tegra234. This has no functional impact. Link: https://lore.kernel.org/r/20220721142052.25971-9-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: xilinx-cpm: Add support for Versal CPM5 Root PortBharat Kumar Gogada1-2/+58
The Xilinx Versal Premium series has CPM5 block which supports Root Port functioning at Gen5 speed. Xilinx Versal CPM5 has a few changes from the existing CPM block: - CPM5 has dedicated register space for control and status registers. - CPM5 legacy interrupt handling needs additional register bit to enable and handle legacy interrupts. Add support for the new CPM5 features. [bhelgaas: compare variant->version with CPM5 explicitly] Link: https://lore.kernel.org/r/20220705105646.16980-3-bharat.kumar.gogada@xilinx.com Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-21PCI: loongson: Work around LS7A incorrect Interrupt Pin registersJianmin Lv1-1/+27
Several devices integrated into LS7A report 1 (which means they use INTA) in their Interrupt Pin registers, but they actually use a different interrupt. Add a quirk to override the incorrect Interrupt Pin values. This is only needed by ACPI-based systems. For DT-based systems, pci_assign_irq() ignores the Interrupt Pin register except to learn that the device uses INTx and the host bridge .map_irq() function (loongson_map_irq()) learns the IRQ mapping via DT and of_irq_parse_pci(). [bhelgaas: drop PCIE_PORT_x, OHCI, GPU since they are function 0 and don't need the quirk, squash in updates from https://lore.kernel.org/r/CAAhV-H40_o+9KS1t67O98GusM38pDaiB4bssxd3KQZpAByfnLg@mail.gmail.com] Link: https://lore.kernel.org/r/20220714124216.1489304-8-chenhuacai@loongson.cn Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-19PCI: fu740: Remove unnecessary include filesBjorn Helgaas1-2/+0
fu740 uses no syscon or regman interfaces, so it doesn't need to include mfs/syscon.h. It uses no regulator interfaces, so it doesn't need to include regulator/consumer.h either. Remove both unnecessary includes. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-15PCI: qcom: Add IPQ60xx supportSelvam Sathappan Periakaruppan2-0/+131
IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that platform. The code is based on downstream[1] Codeaurora kernel v5.4 (branch win.linuxopenwrt.2.0). Split out the DBI registers access part from .init into .post_init. DBI registers are only accessible after phy_power_on(). [1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/ Link: https://lore.kernel.org/r/f7f848653c99abbf9a0f877949a44e52329543ae.1655799816.git.baruch@tkos.co.il Tested-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com> Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-15PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_*Baruch Siach1-2/+15
The PCIE_CAP_LINK1_VAL macro actually defines slot capabilities. Use PCI_EXP_SLTCAP_* macros to spell its value, and rename it to better describe its meaning. Link: https://lore.kernel.org/r/3025d5e1d8da64798db6958f9780c4763fbcac47.1655799816.git.baruch@tkos.co.il Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-15PCI: dwc: Move GEN3_RELATED DBI definitions to common headerBaruch Siach2-6/+6
These are common dwc macros that will be used for other platforms. Link: https://lore.kernel.org/r/1c2d5a7a139be81fa15f356b2380163dbdebdc09.1655799816.git.baruch@tkos.co.il Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-07-15PCI: qcom: Drop manual pipe_clk_src handlingDmitry Baryshkov1-38/+1
Manual reparenting of pipe_clk_src is being replaced with the parking of the clock with clk_disable()/clk_enable() in the PHY driver. Drop redundant code switching of the pipe clock between the PHY clock source and the safe bi_tcxo. Link: https://lore.kernel.org/r/20220608105238.2973600-6-dmitry.baryshkov@linaro.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-14PCI: loongson: Don't access non-existent devicesHuacai Chen1-6/+23
On LS2K/LS7A, config reads to some non-existent devices don't return 0xffffffff (they are hidden devices for debug, and accessing the config space may cause machine hang). This is a hardware flaw but we can only avoid it by software now. Link: https://lore.kernel.org/r/20220714124216.1489304-5-chenhuacai@loongson.cn Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-14PCI: loongson: Add ACPI init supportHuacai Chen2-20/+76
Loongson PCH (LS7A chipset) will be used by both MIPS-based and LoongArch- based Loongson processors. MIPS-based Loongson uses FDT, while LoongArch- based Loongson uses ACPI. Add ACPI init support for the driver in pci-loongson.c because it is currently FDT-only. LoongArch is a new RISC ISA, mainline support will come soon, and documentations are here (in translation): https://github.com/loongson/LoongArch-Documentation Link: https://lore.kernel.org/r/20220714124216.1489304-4-chenhuacai@loongson.cn Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-14PCI: loongson: Use generic 8/16/32-bit config ops on LS2K/LS7AHuacai Chen1-19/+46
LS2K/LS7A support 8/16/32-bits PCI config access operations via CFG1, so we can disable CFG0 for them and safely use pci_generic_config_read()/ pci_generic_config_write() instead of pci_generic_config_read32()/pci_ generic_config_write32(). Link: https://lore.kernel.org/r/20220714124216.1489304-3-chenhuacai@loongson.cn Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-14PCI: qcom: Remove unnecessary pipe_clk handlingDmitry Baryshkov1-34/+3
PCIe PHY drivers (both QMP and PCIe2) already do clk_prepare_enable() / clk_prepare_disable() pipe_clk. Remove extra calls to enable/disable this clock from the PCIe driver, so that the PHY driver can manage the clock on its own. [bhelgaas: rebase on Robert Marko's DBI cleanup: https://lore.kernel.org/r/20220623155004.688090-2-robimarko@gmail.com] Link: https://lore.kernel.org/r/20220608105238.2973600-5-dmitry.baryshkov@linaro.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-13PCI: qcom: Power on PHY before DBI register accessesRobert Marko1-73/+95
IPQ8074 requires the PHY to be powered on before accessing DBI registers. It's not clear whether other variants have the same dependency, but there seems to be no reason for them to be different, so move all the DBI accesses from .init() to .post_init() so they are all after phy_power_on(). [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220623155004.688090-2-robimarko@gmail.com Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-13PCI: qcom: Power on PHY before IPQ8074 DBI register accessesRobert Marko1-20/+28
Currently the Gen2 port in IPQ8074 will cause the system to hang as it accesses DBI registers in qcom_pcie_init_2_3_3(), and those are only accesible after phy_power_on(). Move the DBI read/writes to a new qcom_pcie_post_init_2_3_3(), which is executed after phy_power_on(). Link: https://lore.kernel.org/r/20220623155004.688090-1-robimarko@gmail.com Fixes: a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: stable@vger.kernel.org # v5.11+
2022-07-13PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocksChristian Marangi1-6/+4
We currently enable clocks BEFORE we write to PARF_PHY_CTRL reg to enable clocks and resets. This causes the driver to never set to a ready state with the error 'Phy link never came up'. This is caused by the PHY clock getting enabled before setting the required bits in the PARF regs. A workaround for this was set but with this new discovery we can drop the workaround and use a proper solution to the problem by just enabling the clock only AFTER the PARF_PHY_CTRL bit is set. This correctly sets up the PCIe link and makes it usable even when a bootloader leaves the PCIe link in an undefined state. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Link: https://lore.kernel.org/r/20220708222743.27019-1-ansuelsmth@gmail.com Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-08PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu()Samuel Holland1-1/+1
The cpumask that is passed to this function ultimately comes from irq_data_get_effective_affinity_mask(), which was recently changed to return a const cpumask pointer. The first level of functions handling the affinity mask were updated, but not this helper function. Fixes: 4d0b8298818b ("genirq: Return a const cpumask from irq_data_get_affinity_mask") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220708004931.1672-1-samuel@sholland.org
2022-07-07genirq: Return a const cpumask from irq_data_get_affinity_maskSamuel Holland1-5/+5
Now that the irq_data_update_affinity helper exists, enforce its use by returning a a const cpumask from irq_data_get_affinity_mask. Since the previous commit already updated places that needed to call irq_data_update_affinity, this commit updates the remaining code that either did not modify the cpumask or immediately passed the modified mask to irq_set_affinity. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220701200056.46555-8-samuel@sholland.org
2022-07-06PCI: Drop of_match_ptr() to avoid unused variablesBjorn Helgaas4-4/+4
We have stubs for most OF interfaces even when CONFIG_OF is not set, so we allow building of most controller drivers in that case for compile testing. When CONFIG_OF is not set, "of_match_ptr(<match_table>)" compiles to NULL, which leaves <match_table> unused, resulting in errors like this: $ make W=1 drivers/pci/controller/pci-xgene.c:636:34: error: ‘xgene_pcie_match_table’ defined but not used [-Werror=unused-const-variable=] Drop of_match_ptr() to avoid the unused variable warning. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-05PCI: dwc-plat: Drop dw_plat_pcie_of_match[] forward declarationSerge Semin1-2/+0
The dw_plat_pcie_of_match[] forward declaration was required when dw_plat_pcie_probe() called of_match_device(). 5c204204cf24 ("PCI: designware-plat: Prefer of_device_get_match_data()") replaced that with of_device_get_match_data(), which no longer needs the declaration. Drop the unnecessary forward declaration. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-19-Sergey.Semin@baikalelectronics.ru Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org>
2022-07-05PCI: dwc-plat: Drop unused regmap pointerSerge Semin1-2/+0
1d906b22076e ("PCI: dwc: Add support for EP mode") added the struct dw_plat_pcie regmap pointer, but it has never been used. Remove it. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-18-Sergey.Semin@baikalelectronics.ru Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org>
2022-07-05PCI: dwc-plat: Simplify dw_plat_pcie_probe() return valuesSerge Semin1-4/+5
Save the return value in "ret" for all three cases (DW_PCIE_RC_TYPE, DW_PCIE_EP_TYPE, default) handled by dw_plat_pcie_probe() and return from a single place. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-17-Sergey.Semin@baikalelectronics.ru Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org>
2022-07-05PCI: dwc: Rename struct pcie_port to dw_pcie_rpSerge Semin23-103/+103
All of the DW PCIe core driver entities except the pcie_port struct have names with the "dw_" prefix to distinguish local and common PCIe name spaces, and endpoint-related entities have an "_ep" suffix. Rename struct pcie_port to dw_pcie_rp to make it more consistent with other names. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-16-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
2022-07-05PCI: dwc: Move io_cfg_atu_shared to struct pcie_portSerge Semin2-4/+4
The io_cfg_atu_shared flag is set if there is an outbound iATU window used for both config space accesses and IO port transfers. Since the flag semantic is purely Root Port specific, it's not used in either the DW PCIe common code or in the DW PCIe Endpoint driver. Move it to the struct pcie_port and rename to cfg0_io_shared. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-15-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-26 04:26:45 +0000