summaryrefslogtreecommitdiffstats
path: root/drivers/pci/controller
AgeCommit message (Collapse)AuthorFilesLines
2020-04-03Merge tag 'pci-v5.7-changes' of ↵Linus Torvalds20-882/+2227
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-04-02Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas1-141/+46
- Convert tegra to use shared DT "ranges" parsing (Rob Herring) * remotes/lorenzo/pci/tegra: PCI: tegra: Use pci_parse_request_of_pci_ranges()
2020-04-02Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas1-1/+7
- Apply Qualcomm class fixup only to PCIe host bridges, not to all PCI_VENDOR_ID_QCOM devices (Bjorn Andersson) * remotes/lorenzo/pci/qcom: PCI: qcom: Fix the fixup of PCI_VENDOR_ID_QCOM
2020-04-02Merge branch 'remotes/lorenzo/pci/mobiveil'Bjorn Helgaas9-454/+947
- Restructure mobiveil driver to support either Root Complex mode or Endpoint mode (Hou Zhiqiang) - Collect host initialization into one place (Hou Zhiqiang) - Collect interrupt-related code into one place (Hou Zhiqiang) - Split mobiveil into separate files under drivers/pci/controller/mobiveil for easier reuse (Hou Zhiqiang) - Add callbacks for interrupt initialization and linkup checking (Hou Zhiqiang) - Add 8- and 16-bit CSR accessors (Hou Zhiqiang) - Initialize host driver only if Header Type is "bridge" (Hou Zhiqiang) - Add DT bindings for NXP Layerscape SoCs PCIe Gen4 controller (Hou Zhiqiang) - Add PCIe Gen4 RC driver for Layerscape SoCs (Hou Zhiqiang) - Add pcie-mobiveil __iomem annotations (Hou Zhiqiang) - Add PCI_MSI_IRQ_DOMAIN Kconfig dependency (Hou Zhiqiang) * remotes/lorenzo/pci/mobiveil: PCI: mobiveil: Fix unmet dependency warning for PCIE_MOBIVEIL_PLAT PCI: mobiveil: Fix sparse different address space warnings PCI: mobiveil: Add PCIe Gen4 RC driver for Layerscape SoCs dt-bindings: PCI: Add NXP Layerscape SoCs PCIe Gen4 controller PCI: mobiveil: Add Header Type field check PCI: mobiveil: Add 8-bit and 16-bit CSR register accessors PCI: mobiveil: Allow mobiveil_host_init() to be used to re-init host PCI: mobiveil: Add callback function for link up check PCI: mobiveil: Add callback function for interrupt initialization PCI: mobiveil: Modularize the Mobiveil PCIe Host Bridge IP driver PCI: mobiveil: Collect the interrupt related operations into a function PCI: mobiveil: Move the host initialization into a function PCI: mobiveil: Introduce a new structure mobiveil_root_port
2020-04-02Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas1-74/+186
- Fix memory leak in hv probe path (Dexuan Cui) - Add support for Hyper-V protocol 1.3 (Long Li) - Replace zero-length array with flexible-array member (Gustavo A. R. Silva) - Move hypercall definitions to <asm/hyperv-tlfs.h> (Boqun Feng) - Move retarget definitions to <asm/hyperv-tlfs.h> and make them packed (Boqun Feng) - Add struct hv_msi_entry and hv_set_msi_entry_from_desc() to prepare for future virtual PCI on non-x86 (Boqun Feng) * remotes/lorenzo/pci/hv: PCI: hv: Introduce hv_msi_entry PCI: hv: Move retarget related structures into tlfs header PCI: hv: Move hypercall related definitions into tlfs header PCI: hv: Replace zero-length array with flexible-array member PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2 PCI: hv: Decouple the func definition in hv_dr_state from VSP message PCI: hv: Add missing kfree(hbus) in hv_pci_probe()'s error handling path PCI: hv: Remove unnecessary type casting from kzalloc
2020-04-02Merge branch 'remotes/lorenzo/pci/endpoint'Bjorn Helgaas5-80/+822
- Use notification chain instead of EPF linkup ops for EPC events (Kishon Vijay Abraham I) - Protect concurrent allocation in endpoint outbound address region (Kishon Vijay Abraham I) - Protect concurrent access to pci_epf_ops (Kishon Vijay Abraham I) - Assign function number for each PF in endpoint core (Kishon Vijay Abraham I) - Refactor endpoint mode core initialization (Vidya Sagar) - Add API to notify when core initialization completes (Vidya Sagar) - Add test framework support to defer core initialization (Vidya Sagar) - Update Tegra SoC ABI header to support uninitialization of UPHY PLL when in endpoint mode without reference clock (Vidya Sagar) - Add DT and driver support for Tegra194 PCIe endpoint nodes (Vidya Sagar) - Add endpoint test support for DMA data transfer (Kishon Vijay Abraham I) - Print throughput information in endpoint test (Kishon Vijay Abraham I) - Use streaming DMA APIs for endpoint test buffer allocation (Kishon Vijay Abraham I) - Add endpoint test command line option for DMA (Kishon Vijay Abraham I) - When stopping a controller via configfs, clear endpoint "start" entry to prevent WARN_ON (Kunihiko Hayashi) - Update endpoint ->set_msix() to pay attention to MSI-X BAR Indicator and offset when finding MSI-X tables (Kishon Vijay Abraham I) - MSI-X tables are in local memory, not in the PCI address space. Update pcie-designware-ep to account for this (Kishon Vijay Abraham I) - Allow AM654 PCIe Endpoint to raise MSI-X interrupts (Kishon Vijay Abraham I) - Avoid using module parameter to determine irqtype for endpoint test (Kishon Vijay Abraham I) - Add ioctl to clear IRQ for endpoint test (Kishon Vijay Abraham I) - Add endpoint test 'e' option to clear IRQ (Kishon Vijay Abraham I) - Bump limit on number of endpoint test devices from 10 to 10,000 (Kishon Vijay Abraham I) - Use full pci-endpoint-test name in request_irq() for easier profiling (Kishon Vijay Abraham I) - Reduce log level of -EPROBE_DEFER error messages to debug (Thierry Reding) * remotes/lorenzo/pci/endpoint: misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 dt-bindings: PCI: tegra: Add DT support for PCIe EP nodes in Tegra194 soc/tegra: bpmp: Update ABI header PCI: pci-epf-test: Add support to defer core initialization PCI: dwc: Add API to notify core initialization completion PCI: endpoint: Add notification for core init completion PCI: dwc: Refactor core initialization code for EP mode PCI: endpoint: Add core init notifying feature PCI: endpoint: Assign function number for each PF in EPC core PCI: endpoint: Protect concurrent access to pci_epf_ops with mutex PCI: endpoint: Fix for concurrent memory allocation in OB address region PCI: endpoint: Replace spinlock with mutex PCI: endpoint: Use notification chain mechanism to notify EPC events to EPF
2020-04-02Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas1-36/+195
- Fix dra7xx issue with missing an MSI if new events pended during IRQ handler (Vignesh Raghavendra) * remotes/lorenzo/pci/dwc: PCI: dwc: pci-dra7xx: Fix MSI IRQ handling
2020-04-02Merge branch 'remotes/lorenzo/pci/amlogic'Bjorn Helgaas1-94/+22
- Add Amlogic AXG MIPI/PCIe PHY driver and related DT bindings (Remi Pommarel) - Use shared PHY driver for Amlogic AXG and G12A platforms (Remi Pommarel) * remotes/lorenzo/pci/amlogic: PCI: amlogic: Use AXG PCIE phy: amlogic: Add Amlogic AXG PCIE PHY Driver phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY Driver dt-bindings: PCI: meson: Update PCIE bindings documentation dt-bindings: Add AXG shared MIPI/PCIE analog PHY bindings dt-bindings: Add AXG PCIE PHY bindings
2020-04-02PCI: tegra: Print -EPROBE_DEFER error message at debug levelThierry Reding1-7/+35
Probe deferral is an expected error condition that will usually be recovered from. Print such error messages at debug level to make them available for diagnostic purposes when building with debugging enabled and hide them otherwise to not spam the kernel log with them. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com> Tested-by: Vidya Sagar <vidyas@nvidia.com>
2020-04-02PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interruptKishon Vijay Abraham I1-1/+4
AM654 PCIe EP controller has MSI-X capability register and has the ability to raise MSI-X interrupt. Add support in pci-keystone.c for PCIe endpoint controller in AM654 to raise MSI-X interrupts. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-04-02PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table addressKishon Vijay Abraham I2-29/+18
commit beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler"), in order to raise MSI-X interrupt, obtained MSIX table address from Base Address Register (BAR). However BAR only holds PCI address programmed by the host whereas the MSI-X table should be in the local memory. Store the MSI-X table address (virtual address) as part of ->set_bar() callback and use that to get the message address and message data here. Fixes: beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-04-02PCI: endpoint: Fix ->set_msix() to take BIR and offset as argumentsKishon Vijay Abraham I1-2/+13
commit 8963106eabdc ("PCI: endpoint: Add MSI-X interfaces") while adding support to raise MSI-X interrupts from endpoint didn't include BAR Indicator register (BIR) configuration and MSI-X table offset as arguments in pci_epc_set_msix(). This would result in endpoint controller register using random BAR indicator register, the memory for which might not be allocated by the endpoint function driver. Add BAR indicator register and MSI-X table offset as arguments in pci_epc_set_msix() and allocate space for MSI-X table and pending bit array (PBA) in pci-epf-test endpoint function driver. Fixes: 8963106eabdc ("PCI: endpoint: Add MSI-X interfaces") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-03-31PCI: tegra: Add support for PCIe endpoint mode in Tegra194Vidya Sagar3-18/+695
Add support for the endpoint mode of Synopsys DesignWare core based dual mode PCIe controllers present in Tegra194 SoC. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2020-03-27PCI: dwc: pci-dra7xx: Fix MSI IRQ handlingVignesh Raghavendra1-36/+195
Due to an issue with PCIe wrapper logic built for the DWC PCIe IP on dra7xx, the driver needs to ensure that there are no pending MSI IRQ vector set (i.e PCIE_MSI_INTR0_STATUS reads 0 at least once) before exiting IRQ handler otherwise the dra7xx PCIe wrapper will not register new MSI IRQs even though PCIE_MSI_INTR0_STATUS reports IRQs are pending. Therefore it's no longer possible to use default IRQ handler provided by DWC library. Add an irqchip implementation inside pci-dra7xx.c and install new MSI IRQ handler to handle the above errata. This fixes a bug, where PCIe wifi cards with 4 DMA queues like Intel 8260 used to throw following error and stall during ping/iperf3 tests. [ 97.776310] iwlwifi 0000:01:00.0: Queue 9 stuck for 2500 ms. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-18PCI: mobiveil: Fix unmet dependency warning for PCIE_MOBIVEIL_PLATHou Zhiqiang1-0/+1
Fix the following warning by adding the dependency PCI_MSI_IRQ_DOMAIN to PCIE_MOBIVEIL_PLAT. WARNING: unmet direct dependencies detected for PCIE_MOBIVEIL_HOST Depends on [n]: PCI [=y] && PCI_MSI_IRQ_DOMAIN [=n] Selected by [y]: - PCIE_MOBIVEIL_PLAT [=y] && PCI [=y] && (ARCH_ZYNQMP || COMPILE_TEST [=y]) && OF [=y] Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-03-17PCI: mobiveil: Fix sparse different address space warningsHou Zhiqiang1-3/+4
Fix the sparse warnings below: drivers/pci/controller/mobiveil/pcie-mobiveil.c:44:49: warning: incorrect type in return expression (different address spaces) drivers/pci/controller/mobiveil/pcie-mobiveil.c:44:49: expected void * drivers/pci/controller/mobiveil/pcie-mobiveil.c:44:49: got void [noderef] <asn:2> * drivers/pci/controller/mobiveil/pcie-mobiveil.c:48:41: warning: incorrect type in return expression (different address spaces) drivers/pci/controller/mobiveil/pcie-mobiveil.c:48:41: expected void * drivers/pci/controller/mobiveil/pcie-mobiveil.c:48:41: got void [noderef] <asn:2> * drivers/pci/controller/mobiveil/pcie-mobiveil.c:106:34: warning: incorrect type in argument 1 (different address spaces) drivers/pci/controller/mobiveil/pcie-mobiveil.c:106:34: expected void [noderef] <asn:2> *addr drivers/pci/controller/mobiveil/pcie-mobiveil.c:106:34: got void *[assigned] addr drivers/pci/controller/mobiveil/pcie-mobiveil.c:121:35: warning: incorrect type in argument 1 (different address spaces) drivers/pci/controller/mobiveil/pcie-mobiveil.c:121:35: expected void [noderef] <asn:2> *addr drivers/pci/controller/mobiveil/pcie-mobiveil.c:121:35: got void *[assigned] addr Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reported-by: kbuild test robot <lkp@intel.com>
2020-03-10PCI: Use pci_speed_string() for all PCI/PCI-X/PCIe stringsBjorn Helgaas1-2/+2
Previously some PCI speed strings came from pci_speed_string(), some came from the PCIe-specific PCIE_SPEED2STR(), and some came from a PCIe-specific switch statement. These methods were inconsistent: pci_speed_string() PCIE_SPEED2STR() switch ------------------ ---------------- ------ 33 MHz PCI ... 2.5 GT/s PCIe 2.5 GT/s 2.5 GT/s 5.0 GT/s PCIe 5 GT/s 5 GT/s 8.0 GT/s PCIe 8 GT/s 8 GT/s 16.0 GT/s PCIe 16 GT/s 16 GT/s 32.0 GT/s PCIe 32 GT/s 32 GT/s Standardize on pci_speed_string() as the single source of these strings. Note that this adds ".0" and "PCIe" to some messages, including sysfs "max_link_speed" files, a brcmstb "link up" message, and the link status dmesg logging, e.g., nvme 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:01.1 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) I think it's better to standardize on a single version of the speed text. Previously we had strings like this: /sys/bus/pci/slots/0/cur_bus_speed: 8.0 GT/s PCIe /sys/bus/pci/slots/0/max_bus_speed: 8.0 GT/s PCIe /sys/devices/pci0000:00/0000:00:1c.0/current_link_speed: 8 GT/s /sys/devices/pci0000:00/0000:00:1c.0/max_link_speed: 8 GT/s This changes the latter two to match the slots files: /sys/devices/pci0000:00/0000:00:1c.0/current_link_speed: 8.0 GT/s PCIe /sys/devices/pci0000:00/0000:00:1c.0/max_link_speed: 8.0 GT/s PCIe Based-on-patch by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-09PCI: hv: Introduce hv_msi_entryBoqun Feng1-2/+1
Add a new structure (hv_msi_entry), which is also defined in the TLFS, to describe the msi entry for HVCALL_RETARGET_INTERRUPT. The structure is needed because its layout may be different from architecture to architecture. Also add a new generic interface hv_set_msi_entry_from_desc() to allow different archs to set the msi entry from msi_desc. No functional change, only preparation for the future support of virtual PCI on non-x86 architectures. Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Dexuan Cui <decui@microsoft.com>
2020-03-09PCI: hv: Move retarget related structures into tlfs headerBoqun Feng1-32/+2
Currently, retarget_msi_interrupt and other structures it relys on are defined in pci-hyperv.c. However, those structures are actually defined in Hypervisor Top-Level Functional Specification [1] and may be different in sizes of fields or layout from architecture to architecture. Let's move those definitions into x86's tlfs header file to support virtual PCI on non-x86 architectures in the future. Note that "__packed" attribute is added to these structures during the movement for the same reason as we use the attribute for other TLFS structures in the header file: make sure the structures meet the specification and avoid anything unexpected from the compilers. Additionally, rename struct retarget_msi_interrupt to hv_retarget_msi_interrupt for the consistent naming convention, also mirroring the name in TLFS. [1]: https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Dexuan Cui <decui@microsoft.com>
2020-03-09PCI: hv: Move hypercall related definitions into tlfs headerBoqun Feng1-6/+0
Currently HVCALL_RETARGET_INTERRUPT and HV_PARTITION_ID_SELF are defined in pci-hyperv.c. However, similar to other hypercall related definitions, it makes more sense to put them in the tlfs header file. Besides, these definitions are arch-dependent, so for the support of virtual PCI on non-x86 archs in the future, move them into arch-specific tlfs header file. Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <amurray@thegoodpenguin.co.uk> Reviewed-by: Dexuan Cui <decui@microsoft.com>
2020-03-06PCI: hv: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-4/+4
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Dexuan Cui <decui@microsoft.com>
2020-03-06PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2Long Li1-0/+109
Starting with Hyper-V PCI protocol version 1.3, the host VSP can send PCI_BUS_RELATIONS2 and pass the vNUMA node information for devices on the bus. The vNUMA node tells which guest NUMA node this device is on based on guest VM configuration topology and physical device information. Add code to negotiate v1.3 and process PCI_BUS_RELATIONS2. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com>
2020-03-06PCI: hv: Decouple the func definition in hv_dr_state from VSP messageLong Li1-30/+70
hv_dr_state is used to find present PCI devices on the bus. The structure reuses struct pci_function_description from VSP message to describe a device. To prepare support for pci_function_description v2, decouple this dependence in hv_dr_state so it can work with both v1 and v2 VSP messages. There is no functionality change. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com>
2020-03-04PCI: amlogic: Use AXG PCIERemi Pommarel1-94/+22
Now that PCIE PHY has been introduced for AXG, the whole has_shared_phy logic can be mutualized between AXG and G12A platforms. This new PHY makes use of the shared MIPI/PCIE analog PHY found on AXG platforms, which need to be used in order to have reliable PCIE communications. Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-02-27PCI: brcmstb: Fix build on 32bit ARM platforms with older compilersMarek Szyprowski1-1/+1
Some older compilers have no implementation for the helper for 64-bit unsigned division/modulo, so linking pcie-brcmstb driver causes the "undefined reference to `__aeabi_uldivmod'" error. *rc_bar2_size is always a power of two, because it is calculated as: "1ULL << fls64(entry->res->end - entry->res->start)", so the modulo operation in the subsequent check can be replaced by a simple logical AND with a proper mask. Link: https://lore.kernel.org/r/20200227115146.24515-1-m.szyprowski@samsung.com Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-02-26PCI: qcom: Fix the fixup of PCI_VENDOR_ID_QCOMBjorn Andersson1-1/+7
There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges. Fixes: 322f03436692 ("PCI: qcom: Use default config space read function") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v5.2+
2020-02-25PCI: dwc: Add API to notify core initialization completionVidya Sagar2-0/+12
Add a new API dw_pcie_ep_init_notify() to let platform drivers call it when the core is available for initialization. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-02-25PCI: dwc: Refactor core initialization code for EP modeVidya Sagar2-28/+50
Split core initialization code for EP mode into two, one that doesn't touch core registers and the other that touches core registers. The latter would be called/skipped based on the EPC feature 'core_init_notifier'. In platforms where this is skipped, it would be called indirectly through hooks from the endpoint function driver. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-02-24PCI: tegra: Use pci_parse_request_of_pci_ranges()Rob Herring1-141/+46
Convert Tegra PCI host driver to use the common pci_parse_request_of_pci_ranges(). This allows removing the DT ranges parsing, PCI resource handling, and private storage of resources from the driver. Tested-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andrew Murray <andrew.murray@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org
2020-02-24PCI: hv: Add missing kfree(hbus) in hv_pci_probe()'s error handling pathDexuan Cui1-1/+1
Now that we use kzalloc() to allocate the hbus buffer, we must call kfree() in the error path as well to prevent memory leakage. Fixes: 877b911a5ba0 ("PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com>
2020-02-24PCI: hv: Remove unnecessary type casting from kzallocDexuan Cui1-1/+1
In C, there is no need to cast a void * to any other pointer type, remove an unnecessary cast. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com>
2020-02-21PCI: mobiveil: Add PCIe Gen4 RC driver for Layerscape SoCsHou Zhiqiang4-2/+291
Add a PCI host controller driver for Layerscape SoCs integrating the Mobiveil GPEX IP. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Andrew Murray <amurray@thegoodpenguin.co.uk>
2020-02-21PCI: mobiveil: Add Header Type field checkHou Zhiqiang1-0/+13
Check the Header Type and exit from the host driver initialization if it is not in host mode. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <amurray@thegoodpenguin.co.uk>
2020-02-21PCI: mobiveil: Add 8-bit and 16-bit CSR register accessorsHou Zhiqiang1-0/+23
There are some 8-bit and 16-bit registers in PCIe configuration space, so add these accessors accordingly. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> Reviewed-by: Andrew Murray <amurray@thegoodpenguin.co.uk>
2020-02-21PCI: mobiveil: Allow mobiveil_host_init() to be used to re-init hostHou Zhiqiang2-7/+13
Allow the mobiveil_host_init() function to be used to re-init host controller's PAB and GPEX CSR register block, since the NXP integrated Mobiveil IP has to reset and then re-init the PAB and GPEX CSR registers upon hot-reset. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> Reviewed-by: Andrew Murray <amurray@thegoodpenguin.co.uk>
2020-02-21PCI: mobiveil: Add callback function for link up checkHou Zhiqiang2-0/+8
Platforms integrating the Mobiveil GPEX can implement a specific mechanism to check the link status. Add a callback to enable platform specific link status functions. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: updated log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2020-02-21PCI: mobiveil: Add callback function for interrupt initializationHou Zhiqiang2-1/+18
The Mobiveil GPEX internal MSI/INTx controller is not implemented in all platforms in which the Mobiveil GPEX is integrated. Allow platforms to implement their specific interrupt initialization. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <amurray@thegoodpenguin.co.uk>
2020-02-21PCI: mobiveil: Modularize the Mobiveil PCIe Host Bridge IP driverHou Zhiqiang8-410/+498
Modularize the Mobiveil PCIe host driver according to the abstraction of Root Complex and Endpoint and move it into a new directory in order to make it easier to reuse the driver functions to add new host drivers for systems integrating the Mobiveil PCIe GPEX IP. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2020-02-21PCI: mobiveil: Collect the interrupt related operations into a functionHou Zhiqiang1-23/+42
Collect the interrupt initialization related operations into a new function to make code more readable. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <amurray@thegoodpenguin.co.uk>
2020-02-21PCI: mobiveil: Move the host initialization into a functionHou Zhiqiang1-16/+23
Move the host initialization related operations into a new function so that it can be reused by other platform PCIe host drivers integrating the Mobiveil GPEX. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <amurray@thegoodpenguin.co.uk>
2020-02-21PCI: mobiveil: Introduce a new structure mobiveil_root_portHou Zhiqiang1-39/+60
The Mobiveil PCIe controller can work in either Root Complex mode or Endpoint mode. Introduce a new structure mobiveil_root_port and abstract the RC related members into it so that the code can be used by both modes. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <amurray@thegoodpenguin.co.uk>
2020-02-04treewide: remove redundant IS_ERR() before error code checkMasahiro Yamada1-1/+1
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p). Hence, IS_ERR(p) is unneeded. The semantic patch that generates this commit is as follows: // <smpl> @@ expression ptr; constant error_code; @@ -IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code) +PTR_ERR(ptr) == - error_code // </smpl> Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c] Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO] Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c] Acked-by: Rob Herring <robh@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31Merge tag 'pci-v5.6-changes' of ↵Linus Torvalds16-195/+1837
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Resource management: - Improve resource assignment for hot-added nested bridges, e.g., Thunderbolt (Nicholas Johnson) Power management: - Optionally print config space of devices before suspend (Chen Yu) - Increase D3 delay for AMD Ryzen5/7 XHCI controllers (Daniel Drake) Virtualization: - Generalize DMA alias quirks (James Sewart) - Add DMA alias quirk for PLX PEX NTB (James Sewart) - Fix IOV memory leak (Navid Emamdoost) AER: - Log which device prevents error recovery (Yicong Yang) Peer-to-peer DMA: - Whitelist Intel SkyLake-E (Armen Baloyan) Broadcom iProc host bridge driver: - Apply PAXC quirk whether driver is built-in or module (Wei Liu) Broadcom STB host bridge driver: - Add Broadcom STB PCIe host controller driver (Jim Quinlan) Intel Gateway SoC host bridge driver: - Add driver for Intel Gateway SoC (Dilip Kota) Intel VMD host bridge driver: - Add support for DMA aliases on other buses (Jon Derrick) - Remove dma_map_ops overrides (Jon Derrick) - Remove now-unused X86_DEV_DMA_OPS (Christoph Hellwig) NVIDIA Tegra host bridge driver: - Fix Tegra30 afi_pex2_ctrl register offset (Marcel Ziswiler) Panasonic UniPhier host bridge driver: - Remove module code since driver can't be built as a module (Masahiro Yamada) Qualcomm host bridge driver: - Add support for SDM845 PCIe controller (Bjorn Andersson) TI Keystone host bridge driver: - Fix "num-viewport" DT property error handling (Kishon Vijay Abraham I) - Fix link training retries initiation (Yurii Monakov) - Fix outbound region mapping (Yurii Monakov) Misc: - Add Switchtec Gen4 support (Kelvin Cao) - Add Switchtec Intercomm Notify and Upstream Error Containment support (Logan Gunthorpe) - Use dma_set_mask_and_coherent() since Switchtec supports 64-bit addressing (Wesley Sheng)" * tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (60 commits) PCI: Allow adjust_bridge_window() to shrink resource if necessary PCI: Set resource size directly in adjust_bridge_window() PCI: Rename extend_bridge_window() to adjust_bridge_window() PCI: Rename extend_bridge_window() parameter PCI: Consider alignment of hot-added bridges when assigning resources PCI: Remove local variable usage in pci_bus_distribute_available_resources() PCI: Pass size + alignment to pci_bus_distribute_available_resources() PCI: Rename variables PCI: vmd: Add two VMD Device IDs PCI: Remove unnecessary braces PCI: brcmstb: Add MSI support PCI: brcmstb: Add Broadcom STB PCIe host controller driver x86/PCI: Remove X86_DEV_DMA_OPS PCI: vmd: Remove dma_map_ops overrides iommu/vt-d: Remove VMD child device sanity check iommu/vt-d: Use pci_real_dma_dev() for mapping PCI: Introduce pci_real_dma_dev() x86/PCI: Expose VMD's pci_dev in struct pci_sysdata x86/PCI: Add to_pci_sysdata() helper PCI/AER: Initialize aer_fifo ...
2020-01-29Merge branch 'remotes/lorenzo/pci/uniphier'Bjorn Helgaas1-30/+1
- Remove unused modular code from uniphier, which cannot be built as a module (Masahiro Yamada) * remotes/lorenzo/pci/uniphier: PCI: uniphier: remove module code from built-in driver
2020-01-29Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas1-2/+2
- Fix checking of pm_runtime_get_sync() return value (David Engraf) - Fix AFI_PEX2_CTRL reg offset for Tegra30 (Marcel Ziswiler) * remotes/lorenzo/pci/tegra: PCI: tegra: Fix afi_pex2_ctrl reg offset for Tegra30 PCI: tegra: Fix return value check of pm_runtime_get_sync()
2020-01-29Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas1-0/+150
- Add DT clock/reset info for SDM845 PCIe controller (Bjorn Andersson) - Add support for SDM845 PCIe controller to the qcom driver (Bjorn Andersson) * remotes/lorenzo/pci/qcom: PCI: qcom: Add support for SDM845 PCIe controller dt-bindings: PCI: qcom: Add support for SDM845 PCIe
2020-01-29Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas1-1/+1
- Fix "EXYNOS" typographical styling (Krzysztof Kozlowski) - Update MAINTAINERS with Andrew Murray's email address (Andrew Murray) * remotes/lorenzo/pci/misc: MAINTAINERS: Update my email address PCI: exynos: Rename Exynos to lowercase
2020-01-29Merge branch 'remotes/lorenzo/pci/keystone'Bjorn Helgaas1-3/+3
- Fix link training so we can do it more than once (Yurii Monakov) - Fix keystone outbound window mapping (Yurii Monakov) - Fix error handling when DT lacks "num-viewport" (Kishon Vijay Abraham I) * remotes/lorenzo/pci/keystone: PCI: keystone: Fix error handling when "num-viewport" DT property is not populated PCI: keystone: Fix outbound region mapping PCI: keystone: Fix link training retries initiation
2020-01-29Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas6-7/+626
- Add intel-gw driver for PCIe host controller on Intel Gateway SoC (Dilip Kota) - Use shared DesignWare helpers to configure Fast Training Sequence (FTS) in artpec6 (Dilip Kota) * remotes/lorenzo/pci/dwc: PCI: artpec6: Configure FTS with dwc helper function PCI: dwc: intel: PCIe RC controller driver dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller
2020-01-29Merge branch 'remotes/lorenzo/pci/brcmstb'Bjorn Helgaas3-0/+1025
- Add brcmstb PCIe bindings for Raspberry Pi 4 (Jim Quinlan) - Add Broadcom STB PCIe host controller driver (Jim Quinlan) - Add MSI support for Broadcom STB PCIe host controller driver (Jim Quinlan) * remotes/lorenzo/pci/brcmstb: PCI: brcmstb: Add MSI support PCI: brcmstb: Add Broadcom STB PCIe host controller driver dt-bindings: PCI: Add bindings for brcmstb's PCIe device
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 14:24:00 +0000