summaryrefslogtreecommitdiffstats
path: root/drivers/pci/controller/dwc
AgeCommit message (Collapse)AuthorFilesLines
2019-01-05Merge tag 'pci-v4.21-changes' of ↵Linus Torvalds12-34/+1265
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
2019-01-02Merge branch 'pci/imx6'Bjorn Helgaas1-0/+10
- Enable MSI for imx6 downstream components (Richard Zhu) * pci/imx6: PCI: imx: Enable MSI from downstream components
2019-01-02Merge branch 'remotes/lorenzo/pci/uniphier'Bjorn Helgaas3-0/+482
- Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) * remotes/lorenzo/pci/uniphier: PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description # Conflicts: # drivers/pci/controller/dwc/Kconfig # drivers/pci/controller/dwc/Makefile
2019-01-02Merge branch 'remotes/lorenzo/pci/dwc-msi'Bjorn Helgaas1-13/+24
- Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) * remotes/lorenzo/pci/dwc-msi: PCI: dwc: Move interrupt acking into the proper callback PCI: dwc: Take lock when ACKing an interrupt PCI: dwc: Use interrupt masking instead of disabling
2019-01-02Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas9-21/+146
- Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) * remotes/lorenzo/pci/dwc: MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support dt-bindings: imx6q-pcie: Add multi-pd bindings for imx6sx PCI: histb: Constify dw_pcie_host_ops structure
2019-01-01PCI: imx: Enable MSI from downstream componentsRichard Zhu1-0/+10
The MSI Enable bit in the MSI Capability (PCIe r4.0, sec 7.7.1.2) controls whether a Function can request service using MSI. i.MX6 Root Ports implement the MSI Capability and may use MSI to request service for events like PME, hotplug, AER, etc. In addition, on i.MX6, the MSI Enable bit controls delivery of MSI interrupts from components below the Root Port. Prior to f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS"), enabling CONFIG_PCI_IMX6 automatically also enabled CONFIG_PCIEPORTBUS, and when portdrv claimed the Root Ports, it set the MSI Enable bit so it could use PME, hotplug, AER, etc. As a side effect, that also enabled delivery of MSI interrupts from downstream components. The imx6q-pcie driver itself does not depend on portdrv, so set MSI Enable in imx6q-pcie so MSI from downstream components works even if nobody uses MSI for the Root Port events. Fixes: f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS") Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Sven Van Asbroeck <TheSven73@googlemail.com> Tested-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-19PCI: uniphier: Add UniPhier PCIe host controller supportKunihiko Hayashi3-0/+482
This introduces specific glue layer for UniPhier platform to support PCIe host controller that is based on the DesignWare PCIe core, and this driver supports Root Complex (host) mode. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-19PCI: amlogic: Add the Amlogic Meson PCIe controller driverYue Wang3-0/+603
The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. This patch adds the driver support for Meson PCIe controller. Link: https://lore.kernel.org/linux-pci/20181218224708.GB22610@google.com/ Signed-off-by: Yue Wang <yue.wang@amlogic.com> Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com> [lorenzo.pieralisi@arm.com: updated coding/comment style] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-18PCI: dwc: Don't hard-code DBI/ATU offsetStephen Warren4-8/+35
The DWC PCIe core contains various separate register spaces: DBI, DBI2, ATU, DMA, etc. The relationship between the addresses of these register spaces is entirely determined by the implementation of the IP block, not by the IP block design itself. Hence, the DWC driver must not make assumptions that one register space can be accessed at a fixed offset from any other register space. To avoid such assumptions, introduce an explicit/separate register pointer for the ATU register space. In particular, the current assumption is not valid for NVIDIA's T194 SoC. The ATU register space is only used on systems that require unrolled ATU access. This property is detected at run-time for host controllers, and when this is detected, this patch provides a default value for atu_base that matches the previous assumption re: register layout. An alternative would be to update all drivers for HW that requires unrolled access to explicitly set atu_base. However, it's hard to tell which drivers would require atu_base to be set. The unrolled property is not detected for endpoint systems, and so any endpoint driver that requires unrolled access must explicitly set the iatu_unroll_enabled flag (none do at present), and so a check is added to require the driver to also set atu_base while at it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2018-12-18PCI: imx: Add imx6sx suspend/resume supportLeonard Crestez1-5/+39
Enable PCI suspend/resume support on imx6sx SOCs. This is similar to imx7d with a few differences: * The PM_Turn_Off bit is exposed through an IOMUX GPR, like all other pcie control bits on 6sx. * The pcie_inbound_axi clk needs to be turned off in suspend. On resume it is restored via resume -> deassert_core_reset -> enable_ref_clk. Most of the resume logic is shared with the initial reset after probe. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Lucas Stach <l.stach@pengutronix.de>
2018-12-18PCI: armada8k: Add support for gpio controlled reset signalBaruch Siach1-0/+16
Add support for the gpio reset signal binding as described in the designware-pcie.txt DT binding document. Both the documented 'reset-gpio' property name and the more standard 'reset-gpios' name are supported. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-12-18PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7Trent Piepho1-2/+2
The IMX6 PCI-e host driver also supports the IMX7d. However, the Kconfig dependencies of the driver prevented it from being enabled unless the kernel was built with both IMX6 and IMX7 support. It works fine to build with only IMX7 support enabled therefore adjust the Kconfig entry to allow this configuration. Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
2018-12-18PCI: dwc: layerscape: Constify driver dataStefan Agner1-5/+5
Constify driver data since they do not get changed at runtime. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-18PCI: imx: Add multi-pd supportLeonard Crestez1-0/+48
On some chips the PCIe and PCIE_PHY blocks are in separate power domains which can be power-gated independently. The PCI driver needs to handle this by keeping both domain active. This is intended for imx6sx where PCIe is in DISPLAY and PCIE_PHY in its own domain. Defining the DISPLAY domain requires a way for PCIe to keep it active or it will break when displays are off. The power-domains on imx6sx are meant to look like this: power-domains = <&pd_disp>, <&pd_pci>; power-domain-names = "pcie", "pcie_phy"; Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-11PCI: dwc: Move interrupt acking into the proper callbackMarc Zyngier1-6/+7
The write to the status register is really an ACK for the HW, and should be treated as such by the driver. Let's move it to the irq_ack() callback, which will prevent people from moving it around in order to paper over other bugs. Fixes: 8c934095fa2f ("PCI: dwc: Clear MSI interrupt status after it is handled, not before") Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Link: https://lore.kernel.org/linux-pci/20181113225734.8026-1-marc.zyngier@arm.com/ Reported-by: Trent Piepho <tpiepho@impinj.com> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Tested-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2018-12-11PCI: dwc: Take lock when ACKing an interruptMarc Zyngier1-0/+5
Bizarrely, there is no lock taken in the irq_ack() helper. This puts the ACK callback provided by a specific platform in a awkward situation where there is no synchronization that would be expected on other callback. Introduce the required lock, giving some level of uniformity among callbacks. Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Link: https://lore.kernel.org/linux-pci/20181113225734.8026-1-marc.zyngier@arm.com/ Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Tested-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2018-12-11PCI: dwc: Use interrupt masking instead of disablingMarc Zyngier1-7/+12
The dwc driver is showing an interesting level of brokeness, as it insists on using the enable/disable set of registers to mask/unmask MSIs, meaning that an MSIs being generated while the interrupt is in that "disabled" state will simply be lost. Let's move to the mask/unmask set of registers, which offers the expected semantics. Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Link: https://lore.kernel.org/linux-pci/20181113225734.8026-1-marc.zyngier@arm.com/ Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Tested-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2018-11-27PCI: dwc: Fix MSI-X EP framework address calculation bugGustavo Pimentel1-1/+0
Fix an error caused by 3-bit right rotation on offset address calculation of MSI-X table in dw_pcie_ep_raise_msix_irq(). The initial testing code was setting by default the offset address of MSI-X table to zero, so that even with a 3-bit right rotation the computed result would still be zero and valid, therefore this bug went unnoticed. Fixes: beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler") Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2018-11-20PCI: layerscape: Fix wrong invocation of outbound window disable accessorHou Zhiqiang1-1/+1
The order of parameters is not correct when invoking the outbound window disable routine. Fix it. Fixes: 4a2745d760fa ("PCI: layerscape: Disable outbound windows configured by bootloader") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2018-11-20PCI: imx6: Fix link training status detection in link up checkTrent Piepho1-9/+1
This bug was introduced in the interaction for two commits on either branch of the merge commit 562df5c8521e ("Merge branch 'pci/host-designware' into next"). Commit 4d107d3b5a68 ("PCI: imx6: Move link up check into imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll the link status register directly, checking for link up and not training, and made imx6_pcie_link_up() only check the link up bit (once, not a polling loop). While commit 886bc5ceb5cc ("PCI: designware: Add generic dw_pcie_wait_for_link()"), replaced the loop in imx6_pcie_wait_for_link() with a call to a new dwc core function, which polled imx6_pcie_link_up(), which still checked both link up and not training in a loop. When these two commits were merged, the version of imx6_pcie_wait_for_link() from 886bc5ceb5cc was kept, which eliminated the link training check placed there by 4d107d3b5a68. However, the version of imx6_pcie_link_up() from 4d107d3b5a68 was kept, which eliminated the link training check that had been there and was moved to imx6_pcie_wait_for_link(). The result was the link training check got lost for the imx6 driver. Eliminate imx6_pcie_link_up() so that the default handler, dw_pcie_link_up(), is used instead. The default handler has the correct code, which checks for link up and also that it still is not training, fixing the regression. Fixes: 562df5c8521e ("Merge branch 'pci/host-designware' into next") Signed-off-by: Trent Piepho <tpiepho@impinj.com> [lorenzo.pieralisi@arm.com: rewrote the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Joao Pinto <Joao.Pinto@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com>
2018-11-08PCI: histb: Constify dw_pcie_host_ops structureJulia Lawall1-1/+1
The dw_pcie_host_ops structure is only stored in the ops field of a pcie_port structure, and this field is const, so make the dw_pcie_host_ops structure const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2018-10-25Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds9-680/+902
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-20Merge branch 'remotes/lorenzo/pci/keystone'Bjorn Helgaas5-653/+682
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) * remotes/lorenzo/pci/keystone: PCI: keystone: Cleanup macros defined in pci-keystone.c PCI: keystone: Reorder header file in alphabetical order PCI: keystone: Add debug error message for all errors PCI: keystone: Use ERR_IRQ_STATUS instead of ERR_IRQ_STATUS_RAW to get interrupt status PCI: keystone: Cleanup ks_pcie_link_up() PCI: keystone: Cleanup set_dbi_mode() and get_dbi_mode() PCI: keystone: Cleanup outbound window configuration PCI: keystone: Get number of outbound windows from DT PCI: keystone: Cleanup configuration space access PCI: keystone: Invoke runtime PM APIs to enable clock PCI: keystone: Cleanup PHY handling PCI: keystone: Use SYSCON APIs to get device ID from control module dt-bindings: PCI: keystone: Add bindings to get device control module PCI: keystone: Use uniform function naming convention PCI: keystone: Remove redundant platform_set_drvdata() invocation PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c PCI: keystone: Remove unused argument from ks_dw_pcie_host_init() PCI: keystone: Do not initiate link training multiple times PCI: keystone: Move dw_pcie_setup_rc() out of ks_pcie_establish_link() PCI: keystone: Use quirk to set MRRS for PCI host bridge PCI: keystone: Use quirk to limit MRRS for K2G
2018-10-17PCI: keystone: Cleanup macros defined in pci-keystone.cKishon Vijay Abraham I1-25/+16
No functional change. Cleanup macros defined in pci-keystone.c by removing unused macros, grouping the macros and aligning it properly. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Reorder header file in alphabetical orderKishon Vijay Abraham I1-4/+4
No functional change. Reorder header file in alphabetical order. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Add debug error message for all errorsKishon Vijay Abraham I1-9/+23
commit 025dd3daeda77f61a280da87ae701 ("PCI: keystone: Add error IRQ handler") added dev_err() message only for ERR_AXI and ERR_FATAL. Add debug error message for ERR_SYS, ERR_NONFATAL, ERR_CORR and ERR_AER here. While at that avoid using ERR_IRQ_STATUS_RAW and use ERR_IRQ_STATUS instead. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Use ERR_IRQ_STATUS instead of ERR_IRQ_STATUS_RAW to get ↵Kishon Vijay Abraham I1-2/+1
interrupt status Use ERR_IRQ_STATUS instead of ERR_IRQ_STATUS_RAW to get interrupt status. ERR_IRQ_STATUS_RAW has the status of the interrupts before masking whereas ERR_IRQ_STATUS has the status of the interrupts after masking. Since all the interrupts are unmasked here, use ERR_IRQ_STATUS. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Cleanup ks_pcie_link_up()Kishon Vijay Abraham I2-8/+7
ks_pcie_link_up() uses registers from the designware core to get the status of the link. Move the register defines to pcie-designware.h and cleanup ks_pcie_link_up(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Cleanup set_dbi_mode() and get_dbi_mode()Kishon Vijay Abraham I1-5/+7
No functional change. Use BIT() macro for DBI_CS2 and cleanup set_dbi_mode() and get_dbi_mode(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Cleanup outbound window configurationKishon Vijay Abraham I1-15/+17
Outbound translation window is configured in order to access the PCIe card's MEM space. Cleanup outbound translation configuration here by using BIT() macros, adding a macro for window size and using lower_32_bits/upper_32_bits macros for configuring the 64 bit offset in the outbound translation region. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Get number of outbound windows from DTKishon Vijay Abraham I1-2/+11
Instead of having a fixed outbound window count, get the number of outbound windows from the device tree. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Cleanup configuration space accessKishon Vijay Abraham I1-50/+20
Cleanup configuration space access by removing ks_pcie_cfg_setup() which has an unncessary check of "if (bus == 0)" which will never be the case of *_other_conf() and adding macros for configuring the CFG_SETUP register required for accessing the configuration space of the device. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Invoke runtime PM APIs to enable clockKishon Vijay Abraham I1-16/+12
Invoke runtime PM APIs to enable clocks and remove explicit clock enabling using clk_prepare_enable(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Cleanup PHY handlingKishon Vijay Abraham I1-16/+106
Cleanup PHY handling by using devm_phy_optional_get() to get PHYs if the PHYs are optional, creating a device link between the PHY device and the controller device and disable PHY on error cases here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Use SYSCON APIs to get device ID from control moduleKishon Vijay Abraham I1-13/+32
Control module registers should be read using syscon APIs. pci-keystone.c uses platform_get_resource() to get control module registers. Fix it here by using syscon APIs to get device id from control module. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Use uniform function naming conventionKishon Vijay Abraham I1-110/+111
No functional change. Some function names begin with ks_dw_pcie_* and some function names begin with ks_pcie_*. Modify it so that all function names begin with ks_pcie_*. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Remove redundant platform_set_drvdata() invocationKishon Vijay Abraham I1-2/+0
No functional change. Remove redundant platform_set_drvdata() invocation in ks_pcie_probe(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.cKishon Vijay Abraham I4-541/+489
No functional change. Having two different files for keystone PCI driver doesn't serve any purpose. Merge pci-keystone-dw.c and pci-keystone.c into a single pci-keystone.c file and remove pci-keystone.h. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Remove unused argument from ks_dw_pcie_host_init()Kishon Vijay Abraham I3-5/+3
No functional change. Remove unused "msi_intc_np" argument from ks_dw_pcie_host_init(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Do not initiate link training multiple timesKishon Vijay Abraham I1-6/+4
commit 886bc5ceb5cc3ad4b219502d72 ("PCI: designware: Add generic dw_pcie_wait_for_link()") while adding a generic dw_pcie_wait_for_link() performed a special handling (initiate link training multiple times) for keystone which is not required. This also resulted in unncessarily waiting for more time to establish the link even when no PCI device is connected. Remove it and make it look similar to other dwc based PCIe drivers. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Move dw_pcie_setup_rc() out of ks_pcie_establish_link()Kishon Vijay Abraham I1-3/+2
No functional change. Move dw_pcie_setup_rc() out of ks_pcie_establish_link() so that ks_pcie_establish_linki() can be used only to start the link. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Use quirk to set MRRS for PCI host bridgeKishon Vijay Abraham I1-22/+15
Reuse the already existing quirk to set MRRS for PCI host bridge instead of explicitly setting MRRS in ks_pcie_host_init(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: keystone: Use quirk to limit MRRS for K2GKishon Vijay Abraham I1-0/+3
PCI controller in K2G also has a limitation that memory read request size (MRRS) must not exceed 256 bytes. Use the quirk to limit MRRS (added for K2HK, K2L and K2E) for K2G as well. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-05PCI: imx: Add PME_Turn_Off supportLeonard Crestez1-0/+24
When the root complex suspends it must send a PME_Turn_Off TLP. Implement this by asserting the "turnoff" reset. On imx7d this functionality is part of the System Reset Controller (SRC) and is exposed through the linux reset-controller subsystem. On imx6 equivalent bits are in the IOMUXC pinmux controller General Purpose Register (GPR) area which the imx6-pcie driver accesses directly. This is only for imx7d right now but it's deliberately implemented as an optional reset, ignoring the chip variant: * Older dtbs won't have this reset so it will be ignored. * Future chips might also expose this as a reset controller. For example imx8m (not yet supported) has the exact same PCIE_CTRL_APPS_TURNOFF bit in the same location. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2018-10-01PCI: kirin: Fix section mismatch warningNathan Chancellor1-2/+2
The PCI kirin driver compilation produces the following section mismatch warning: WARNING: vmlinux.o(.text+0x4758cc): Section mismatch in reference from the function kirin_pcie_probe() to the function .init.text:kirin_add_pcie_port() The function kirin_pcie_probe() references the function __init kirin_add_pcie_port(). This is often because kirin_pcie_probe lacks a __init annotation or the annotation of kirin_add_pcie_port is wrong. Remove '__init' from kirin_add_pcie_port() to fix it. Fixes: fc5165db245a ("PCI: kirin: Add HiSilicon Kirin SoC PCIe controller driver") Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-09-25PCI: dwc: pci-dra7xx: Enable errata i870 for both EP and RC modeVignesh R1-3/+8
Errata i870 is applicable in both EP and RC mode. Therefore rename function dra7xx_pcie_ep_unaligned_memaccess(), that implements errata workaround, to dra7xx_pcie_unaligned_memaccess() and call it for both RC and EP. Make sure driver probe does not fail in case the workaround is not applied for RC mode in order to maintain DT backward compatibility. Reported-by: Chris Welch <Chris.Welch@viavisolutions.com> Signed-off-by: Vignesh R <vigneshr@ti.com> [lorenzo.pieralisi@arm.com: reworded the log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-20PCI: dwc: Fix scheduling while atomic issuesJisheng Zhang2-6/+5
When programming the inbound/outbound ATUs, we call usleep_range() after each checking PCIE_ATU_ENABLE bit. Unfortunately, the ATU programming can be executed in atomic context: inbound ATU programming could be called through pci_epc_write_header() =>dw_pcie_ep_write_header() =>dw_pcie_prog_inbound_atu() outbound ATU programming could be called through pci_bus_read_config_dword() =>dw_pcie_rd_conf() =>dw_pcie_prog_outbound_atu() Fix this issue by calling mdelay() instead. Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support") Fixes: d8bbeb39fbf3 ("PCI: designware: Wait for iATU enable") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> [lorenzo.pieralisi@arm.com: commit log update] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2018-09-18PCI: qcom: Fix error handling in runtime PM supportBjorn Andersson1-17/+39
The driver does not cope with the fact that probe can fail in a number of cases after enabling runtime PM on the device; this results in warnings about "Unbalanced pm_runtime_enable". Furthermore if probe fails after invoking qcom_pcie_host_init() the power-domain will be left referenced. As it is not possible for the error handling in qcom_pcie_host_init() to handle errors happening after returning from that function the pm_runtime_get_sync() is moved to qcom_pcie_probe() as well. Fixes: 854b69efbdd2 ("PCI: qcom: add runtime pm support to pcie_port") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2018-09-18PCI: imx: Initial imx7d pm supportLeonard Crestez1-5/+92
On imx7d the pcie-phy power domain is turned off in suspend and this can make the system hang after resume when attempting any read from PCI. Fix this by adding minimal suspend/resume code. This will prepare for powering down on suspend and reset the block on resume. Code is only for imx7d but a very similar sequence can be used for other SOCs. Original-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [lorenzo.pieralisi@arm.com: commit log update] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2018-09-18PCI: imx6: Support MPLL reconfiguration for 100MHz and 200MHz refclockLucas Stach1-0/+55
The power up defaults of the MPLL are designed for the standard 125MHz refclock derived from the ENET PLL. As this clock has a jitter that violates the PCIe Gen2 timing requirements, some board designs use an external reference clock generator. Those clock generators may output a clock at a different rate than what the MPLL expects (usually a 100MHz clock, to re-use the PCIe bus clock). In that case the MPLL must be reconfigured via overrides to use different refclock dividers and loop multipliers. The i.MX6 reference manual lists both 100MHz and 200MHz as supported refclock rates and the associated mult and div values. Only the 100MHz setup has been tested on a real board, but since the 200MHz setup only differs in the used pre-divider it seems safe to add it now. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-14 00:44:59 +0000