summaryrefslogtreecommitdiffstats
path: root/drivers/pci/ats.c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-05Merge branch 'pci/doc'Bjorn Helgaas1-1/+2
- Fix several kerneldoc warnings (Krzysztof Kozlowski) * pci/doc: PCI: Fix kerneldoc warnings
2020-08-05PCI: Fix kerneldoc warningsKrzysztof Kozlowski1-1/+2
Fix kerneldoc warnings, e.g., $ make W=1 drivers/pci/ drivers/pci/ats.c:196: warning: Function parameter or member 'pdev' not described in 'pci_enable_pri' drivers/pci/ats.c:196: warning: Function parameter or member 'reqs' not described in 'pci_enable_pri' ... Link: https://lore.kernel.org/r/20200729201224.26799-2-krzk@kernel.org Link: https://lore.kernel.org/r/20200729201224.26799-3-krzk@kernel.org Link: https://lore.kernel.org/r/20200729201224.26799-4-krzk@kernel.org Link: https://lore.kernel.org/r/20200729201224.26799-5-krzk@kernel.org Link: https://lore.kernel.org/r/20200729201224.26799-6-krzk@kernel.org Link: https://lore.kernel.org/r/20200729201224.26799-7-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-24PCI/ATS: Add pci_pri_supported() to check device or associated PFAshok Raj1-0/+15
For SR-IOV, the PF PRI is shared between the PF and any associated VFs, and the PRI Capability is allowed for PFs but not for VFs. Searching for the PRI Capability on a VF always fails, even if its associated PF supports PRI. Add pci_pri_supported() to check whether device or its associated PF supports PRI. [bhelgaas: commit log, avoid "!!"] Fixes: b16d0cb9e2fc ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS") Link: https://lore.kernel.org/r/1595543849-19692-1-git-send-email-ashok.raj@intel.com Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: stable@vger.kernel.org # v4.4+
2020-05-27PCI/ATS: Only enable ATS for trusted devicesJean-Philippe Brucker1-1/+17
Add pci_ats_supported(), which checks whether a device has an ATS capability, and whether it is trusted. A device is untrusted if it is plugged into an external-facing port such as Thunderbolt and could be spoofing an existing device to exploit weaknesses in the IOMMU configuration. PCIe ATS is one such weaknesses since it allows endpoints to cache IOMMU translations and emit transactions with 'Translated' Address Type (10b) that partially bypass the IOMMU translation. The SMMUv3 and VT-d IOMMU drivers already disallow ATS and transactions with 'Translated' Address Type for untrusted devices. Add the check to pci_enable_ats() to let other drivers (AMD IOMMU for now) benefit from it. By checking ats_cap, the pci_ats_supported() helper also returns whether ATS was globally disabled with pci=noats, and could later include more things, for example whether the whole PCIe hierarchy down to the endpoint supports ATS. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Joerg Roedel <jroedel@suse.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200520152201.3309416-2-jean-philippe@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-18PCI/ATS: Export symbols of PASID functionsJean-Philippe Brucker1-0/+4
The Arm SMMUv3 driver uses pci_{enable,disable}_pasid() and related functions. Export them to allow the driver to be built as a module. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-02-06Merge tag 'pci-v5.6-fixes-1' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Define to_pci_sysdata() always to fix build breakage when !CONFIG_PCI (Jason A. Donenfeld) - Use PF PASID for VFs to fix VF IOMMU bind failures (Kuppuswamy Sathyanarayanan) * tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/ATS: Use PF PASID for VFs x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCI
2020-02-05PCI/ATS: Use PF PASID for VFsKuppuswamy Sathyanarayanan1-2/+4
Per PCIe r5.0, sec 9.3.7.14, if a PF implements the PASID Capability, the PF PASID configuration is shared by its VFs, and VFs must not implement their own PASID Capability. But commit 751035b8dc06 ("PCI/ATS: Cache PASID Capability offset") changed pci_max_pasids() and pci_pasid_features() to use the PASID Capability of the VF device instead of the associated PF device. This leads to IOMMU bind failures when pci_max_pasids() and pci_pasid_features() are called for VFs. In pci_max_pasids() and pci_pasid_features(), always use the PF PASID Capability. Fixes: 751035b8dc06 ("PCI/ATS: Cache PASID Capability offset") Link: https://lore.kernel.org/r/fe891f9755cb18349389609e7fed9940fc5b081a.1580325170.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v5.5+
2019-12-23PCI/ATS: Restore EXPORT_SYMBOL_GPL() for pci_{enable,disable}_ats()Greg Kroah-Hartman1-0/+2
Commit d355bb209783 ("PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL()") unexported a bunch of symbols from the PCI core since the only external users were non-modular IOMMU drivers. Although most of those symbols can remain private for now, 'pci_{enable,disable_ats()' is required for the ARM SMMUv3 driver to build as a module, otherwise we get a build failure as follows: | ERROR: "pci_enable_ats" [drivers/iommu/arm-smmu-v3.ko] undefined! | ERROR: "pci_disable_ats" [drivers/iommu/arm-smmu-v3.ko] undefined! Re-export these two functions so that the ARM SMMUv3 driver can be build as a module. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> [will: rewrote commit message] Signed-off-by: Will Deacon <will@kernel.org> Tested-by: John Garry <john.garry@huawei.com> # smmu v3 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-15PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL()Bjorn Helgaas1-14/+0
The following functions are only used by the PCI core or by IOMMU drivers that cannot be modular, so there's no need to export them at all: pci_enable_ats() pci_disable_ats() pci_restore_ats_state() pci_ats_queue_depth() pci_ats_page_aligned() pci_enable_pri() pci_restore_pri_state() pci_reset_pri() pci_prg_resp_pasid_required() pci_enable_pasid() pci_disable_pasid() pci_restore_pasid_state() pci_pasid_features() pci_max_pasids() Remove the unnecessary EXPORT_SYMBOL_GPL()s. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2019-10-15PCI/ATS: Cache PRI PRG Response PASID Required bitBjorn Helgaas1-13/+10
The PRG Response PASID Required bit in the PRI Capability is read-only. Read it once when we enumerate the device and cache the value so we don't need to read it again. Based-on-patch-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ATS: Cache PASID Capability offsetKuppuswamy Sathyanarayanan1-21/+21
Previously each PASID interface searched for the PASID Capability. Cache the capability offset the first time we use it instead of searching each time. [bhelgaas: commit log, reorder patch to later, call pci_pasid_init() from pci_init_capabilities()] Link: https://lore.kernel.org/r/4957778959fa34eab3e8b3065d1951989c61cb0f.1567029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-6-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ATS: Cache PRI Capability offsetKuppuswamy Sathyanarayanan1-25/+26
Previously each PRI interface searched for the PRI Capability. Cache the capability offset the first time we use it instead of searching each time. [bhelgaas: commit log, reorder patch to later, call pci_pri_init() from pci_init_capabilities()] Link: https://lore.kernel.org/r/0c5495d376faf6dbb8eb2165204c474438aaae65.156 7029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-5-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ATS: Disable PF/VF ATS service independentlyKuppuswamy Sathyanarayanan1-11/+0
Previously we didn't disable the PF ATS until all associated VFs had disabled it. But per PCIe spec r5.0, sec 9.3.7.8, the ATS Capability in VFs and associated PFs may be enabled independently. Leaving ATS enabled in the PF unnecessarily may have power and performance impacts. Remove this dependency logic in the ATS enable/disable code. [bhelgaas: commit log] Suggested-by: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/8163ab8fa66afd2cba514ae95d29ab12104781aa.1567029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-4-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <keith.busch@intel.com>
2019-10-15PCI/ATS: Handle sharing of PF PASID Capability with all VFsKuppuswamy Sathyanarayanan1-0/+23
Per PCIe r5.0, sec 9.3.7.14, if a PF implements the PASID Capability, the PF PASID configuration is shared by its VFs. VFs must not implement their own PASID Capability. Since VFs don't have a PASID Capability, pci_enable_pasid() always failed, which caused IOMMU setup to fail. Update the PASID interfaces so for VFs they reflect the state of the PF PASID. [bhelgaas: rebase without pasid_cap caching, commit log] Suggested-by: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/8ba1ac192e4ac737508b6ac15002158e176bab91.1567029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-3-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <keith.busch@intel.com>
2019-10-15PCI/ATS: Handle sharing of PF PRI Capability with all VFsKuppuswamy Sathyanarayanan1-0/+24
Per PCIe r5.0, sec 9.3.7.11, VFs must not implement the PRI Capability. If the PF implements PRI, it is shared by the VFs. Since VFs don't have a PRI Capability, pci_enable_pri() always failed, which caused IOMMU setup to fail. Update the PRI interfaces so for VFs they reflect the state of the PF PRI. [bhelgaas: rebase without pri_cap caching, commit log] Suggested-by: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/b971e31f8695980da8e4a7f93e3b6a3edba3edaa.1567029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-2-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <keith.busch@intel.com>
2019-10-15PCI/ATS: Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRIBjorn Helgaas1-30/+25
pci_prg_resp_pasid_required() returns the value of the "PRG Response PASID Required" bit from the PRI capability, but the interface was previously defined under #ifdef CONFIG_PCI_PASID. Move it from CONFIG_PCI_PASID to CONFIG_PCI_PRI so it's with the other PRI-related things. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2019-07-09PCI: Fix typos and whitespace errorsBjorn Helgaas1-1/+1
Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2019-02-26PCI/ATS: Add pci_ats_page_aligned() interfaceKuppuswamy Sathyanarayanan1-0/+27
Return the Page Aligned Request bit in the ATS Capability Register. As per PCIe spec r4.0, sec 10.5.1.2, if the Page Aligned Request bit is set, it indicates the Untranslated Addresses generated by the device are always aligned to a 4096 byte boundary. An IOMMU that can only translate page-aligned addresses can only be used with devices that always produce aligned Untranslated Addresses. This interface will be used by drivers for such IOMMUs to determine whether devices can use the ATS service. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-02-26PCI/ATS: Add pci_prg_resp_pasid_required() interface.Kuppuswamy Sathyanarayanan1-0/+30
Return the PRG Response PASID Required bit in the Page Request Status Register. As per PCIe spec r4.0, sec 10.5.2.3, if this bit is Set, the device expects a PASID TLP Prefix on PRG Response Messages when the corresponding Page Requests had a PASID TLP Prefix. If Clear, the device does not expect PASID TLP Prefixes on any PRG Response Message, and the device behavior is undefined if the device receives a PRG Response Message with a PASID TLP Prefix. Also the device behavior is undefined if this bit is Set and the device receives a PRG Response Message with no PASID TLP Prefix when the corresponding Page Requests had a PASID TLP Prefix. This function will be used by drivers like IOMMU, if it is required to check the status of the PRG Response PASID Required bit before enabling the PASID support of the device. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-06-30PCI: Enable PASID only if entire path supports End-End TLP prefixesSinan Kaya1-0/+3
A PCIe endpoint carries the process address space identifier (PASID) in the TLP prefix as part of the memory read/write transaction. The address information in the TLP is relevant only for a given PASID context. An IOMMU takes PASID value and the address information from the TLP to look up the physical address in the system. PASID is an End-End TLP Prefix (PCIe r4.0, sec 6.20). Sec 2.2.10.2 says It is an error to receive a TLP with an End-End TLP Prefix by a Receiver that does not support End-End TLP Prefixes. A TLP in violation of this rule is handled as a Malformed TLP. This is a reported error associated with the Receiving Port (see Section 6.2). Prevent error condition by proactively requiring End-End TLP prefix to be supported on the entire data path between the endpoint and the root port before enabling PASID. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-10PCI: Add "pci=noats" boot parameterGil Kupfer1-0/+3
Adds a "pci=noats" boot parameter. When supplied, all ATS related functions fail immediately and the IOMMU is configured to not use device-IOTLB. Any function that checks for ATS capabilities directly against the devices should also check this flag. Currently, such functions exist only in IOMMU drivers, and they are covered by this patch. The motivation behind this patch is the existence of malicious devices. Lots of research has been done about how to use the IOMMU as protection from such devices. When ATS is supported, any I/O device can access any physical address by faking device-IOTLB entries. Adding the ability to ignore these entries lets sysadmins enhance system security. Signed-off-by: Gil Kupfer <gilkup@cs.technion.ac.il> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-03-19PCI: Tidy commentsBjorn Helgaas1-6/+4
Remove pointless comments that tell us the file name, remove blank line comments, follow multi-line comment conventions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-26PCI: Add SPDX GPL-2.0 when no license was specifiedBjorn Helgaas1-0/+1
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") added SPDX GPL-2.0 to several PCI files that previously contained no license information. Add SPDX GPL-2.0 to all other PCI files that did not contain any license information and hence were under the default GPL version 2 license of the kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-30PCI: Restore PRI and PASID state after Function-Level ResetCQ Tang1-16/+48
After a Function-Level Reset, PCI states need to be restored. Save PASID features and PRI reqs cached. [bhelgaas: search for capability only if PRI/PASID were enabled] Signed-off-by: CQ Tang <cq.tang@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jean-Phillipe Brucker <jean-philippe.brucker@arm.com> Cc: David Woodhouse <dwmw2@infradead.org>
2017-05-30PCI: Cache PRI and PASID bits in pci_devJean-Philippe Brucker1-0/+23
Device drivers need to check if an IOMMU enabled ATS, PRI and PASID in order to know when they can use the SVM API. Cache PRI and PASID bits in the pci_dev structure, similarly to what is currently done for ATS. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-13PCI: Remove pci_ats_enabled()Bjorn Helgaas1-3/+3
Remove pci_ats_enabled(). There are no callers outside the ATS code itself. We don't need to check ats_cap, because if we don't find an ATS capability, we'll never set ats_enabled. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Stop caching ATS Invalidate Queue DepthBjorn Helgaas1-5/+4
Stop caching the Invalidate Queue Depth in struct pci_dev. pci_ats_queue_depth() is typically called only once per device, and it returns a fixed value per-device, so callers who need the value frequently can cache it themselves. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Clean up ATS error handlingBjorn Helgaas1-5/+5
There's no need to BUG() if we enable ATS when it's already enabled. We don't need to BUG() when disabling ATS on a device that doesn't support ATS or if it's already disabled. If ATS is enabled, certainly we found an ATS capability in the past, so it should still be there now. Clean up these error paths. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Use pci_physfn() rather than looking up physfn by handBjorn Helgaas1-4/+4
Use the pci_physfn() helper rather than looking up physfn by hand. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Inline the ATS setup code into pci_ats_init()Bjorn Helgaas1-6/+1
The ATS setup code in ats_alloc_one() is only used by pci_ats_init(), so inline it there. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Rationalize pci_ats_queue_depth() error checkingBjorn Helgaas1-4/+4
We previously returned -ENODEV for devices that don't support ATS (except that we always returned 0 for VFs, whether or not they support ATS). For consistency, always return -EINVAL (not -ENODEV) if the device doesn't support ATS. Return zero for VFs that support ATS. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Embed ATS info directly into struct pci_devBjorn Helgaas1-40/+21
The pci_ats struct is small and will get smaller, so I don't think it's worth allocating it separately from the pci_dev struct. Embed the ATS fields directly into struct pci_dev. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Allocate ATS struct during enumerationBjorn Helgaas1-56/+42
Previously, we allocated pci_ats structures when an IOMMU driver called pci_enable_ats(). An SR-IOV VF shares the STU setting with its PF, so when enabling ATS on the VF, we allocated a pci_ats struct for the PF if it didn't already have one. We held the sriov->lock to serialize threads concurrently enabling ATS on several VFS so only one would allocate the PF pci_ats. Gregor reported a deadlock here: pci_enable_sriov sriov_enable virtfn_add mutex_lock(dev->sriov->lock) # acquire sriov->lock pci_device_add device_add BUS_NOTIFY_ADD_DEVICE notifier chain iommu_bus_notifier amd_iommu_add_device # iommu_ops.add_device init_iommu_group iommu_group_get_for_dev iommu_group_add_device __iommu_attach_device amd_iommu_attach_device # iommu_ops.attach_device attach_device pci_enable_ats mutex_lock(dev->sriov->lock) # deadlock There's no reason to delay allocating the pci_ats struct, and if we allocate it for each device at enumeration-time, there's no need for locking in pci_enable_ats(). Allocate pci_ats struct during enumeration, when we initialize other capabilities. Note that this implementation requires ATS to be enabled on the PF first, before on any of the VFs because the PF controls the STU for all the VFs. Link: http://permalink.gmane.org/gmane.linux.kernel.iommu/9433 Reported-by: Gregor Dick <gdick@solarflare.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2014-01-10PCI: Removed unused parts of Page Request Interface supportStephen Hemminger1-82/+0
My philosophy is unused code is dead code. And dead code is subject to bit rot and is a likely source of bugs. Use it or lose it. This reverts parts of c320b976d783 ("PCI: Add implementation for PRI capability"), removing these interfaces: pci_pri_enabled() pci_pri_stopped() pci_pri_status() [bhelgaas: split to separate patch] Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Joerg Roedel <joro@8bytes.org>
2013-11-14PCI: Fix whitespace, capitalization, and spelling errorsBjorn Helgaas1-1/+1
Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-01-11Merge branch 'linux-next' of ↵Linus Torvalds1-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits) x86/PCI: Expand the x86_msi_ops to have a restore MSIs. PCI: Increase resource array mask bit size in pcim_iomap_regions() PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT) PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB x86/PCI: amd: factor out MMCONFIG discovery PCI: Enable ATS at the device state restore PCI: msi: fix imbalanced refcount of msi irq sysfs objects PCI: kconfig: English typo in pci/pcie/Kconfig PCI/PM/Runtime: make PCI traces quieter PCI: remove pci_create_bus() xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus() x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented() x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources sparc/PCI: convert to pci_create_root_bus() sh/PCI: convert to pci_scan_root_bus() for correct root bus resources powerpc/PCI: convert to pci_create_root_bus() powerpc/PCI: split PHB part out of pcibios_map_io_space() ... Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due to the same patches being applied in other branches.
2012-01-09Merge branches 'iommu/fixes', 'arm/omap' and 'x86/amd' into nextJoerg Roedel1-45/+45
Conflicts: drivers/pci/hotplug/acpiphp_glue.c
2012-01-06PCI: Enable ATS at the device state restoreHao, Xudong1-0/+17
During S3 or S4 resume or PCI reset, ATS regs aren't restored correctly. This patch enables ATS at the device state restore if PCI device has ATS capability. Signed-off-by: Xudong Hao <xudong.hao@intel.com> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06PCI: Fix PRI and PASID consistencyAlex Williamson1-10/+10
These are extended capabilities, rename and move to proper group for consistency. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-12-05PCI: fix ats compile failureJames Bottomley1-0/+1
I get this compile failure on parisc: drivers/pci/ats.c: In function 'ats_alloc_one': drivers/pci/ats.c:29: error: implicit declaration of function 'kzalloc' drivers/pci/ats.c:29: warning: assignment makes pointer from integer without a cast drivers/pci/ats.c: In function 'ats_free_one': drivers/pci/ats.c:45: error: implicit declaration of function 'kfree' Because ats.c is missing linux/slab.h as an include. This patch fixes it Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-12-05PCI: More PRI/PASID cleanupAlex Williamson1-34/+35
More consistency cleanups. Drop the _OFF, separate and indent CTRL/CAP/STATUS bit definitions. This helped find the previous mis-use of bit 0 in the PASID capability register. Reviewed-by: Joerg Roedel <joerg.roedel@amd.com> Tested-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-12-05PCI: Enable is not exposed as a PASID capabilityAlex Williamson1-3/+2
The PASID ECN indicates bit 0 is reserved in the capability register. Switch pci_enable_pasid() to error if PASID is already enabled and don't expose enable as a feature in pci_pasid_features(). Reviewed-by: Joerg Roedel <joerg.roedel@amd.com> Tested-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-12-05PCI: Fix PRI and PASID consistencyAlex Williamson1-10/+10
These are extended capabilities, rename and move to proper group for consistency. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-31pci: Fix files needing export.h for EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker1-0/+1
They were implicitly getting it from device.h --> module.h but we want to clean that up. So add the minimal header for these macros. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-14PCI: Add support for PASID capabilityJoerg Roedel1-0/+113
Devices supporting Process Address Space Identifiers (PASIDs) can use an IOMMU to access multiple IO address spaces at the same time. A PCIe device indicates support for this feature by implementing the PASID capability. This patch adds support for the capability to the Linux kernel. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-14PCI: Add implementation for PRI capabilityJoerg Roedel1-0/+167
Implement the necessary functions to handle PRI capabilities on PCIe devices. With PRI devices behind an IOMMU can signal page fault conditions to software and recover from such faults. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-14PCI: Export ATS functions to modulesJoerg Roedel1-0/+3
This patch makes the ATS functions usable for modules. They will be used by a module implementing some advanced AMD IOMMU features. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-14PCI: Move ATS implementation into own fileJoerg Roedel1-0/+155
ATS does not depend on IOV support, so move the code into its own file. This file will also include support for the PRI and PASID capabilities later. Also give ATS its own Kconfig variable to allow selecting it without IOV support. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>