summaryrefslogtreecommitdiffstats
path: root/drivers/pci/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2019-11-21PCI: Allow building PCIe things without PCIEPORTBUSBjorn Helgaas1-1/+2
Some things in drivers/pci/pcie (aspm.c and ptm.c) do not depend on the PCIe portdrv, so we should be able to build them even if PCIEPORTBUS is not selected. Remove the PCIEPORTBUS guard from building pcie/. Link: https://lore.kernel.org/r/20191106222420.10216-6-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-04-15PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint driversKishon Vijay Abraham I1-1/+1
of_pci_get_max_link_speed() is built only if CONFIG_PCI is enabled. Make of_pci_get_max_link_speed() to be also used by PCI Endpoint controllers with just CONFIG_PCI_ENDPOINT enabled. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2018-12-20PCI/ACPI: Allow ACPI to be built without CONFIG_PCI setSinan Kaya1-1/+1
We are compiling PCI code today for systems with ACPI and no PCI device present. Remove the useless code and reduce the tight dependency. Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-20Merge branch 'remotes/lorenzo/pci/controller-misc'Bjorn Helgaas1-0/+1
- Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) * remotes/lorenzo/pci/controller-misc: PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic dt-bindings: PCI: rcar: Add device tree support for r8a7744 dt-bindings: PCI: rcar: Add device tree support for r8a7744 DT: pci: rcar-pci: document R8A77990 bindings PCI: Remove unnecessary check of device_type == pci
2018-10-18PCI: Introduce PCI bridge emulated config space common logicThomas Petazzoni1-0/+1
Some PCI host controllers do not expose a configuration space for the root port PCI bridge. Due to this, the Marvell Armada 370/38x/XP PCI controller driver (pci-mvebu) emulates a root port PCI bridge configuration space, and uses that to (among other things) dynamically create the memory windows that correspond to the PCI MEM and I/O regions. Since we now need to add a very similar logic for the Marvell Armada 37xx PCI controller driver (pci-aardvark), instead of duplicating the code, we create in this commit a common logic called pci-bridge-emul. The idea of this logic is to emulate a root port PCI bridge configuration space by providing configuration space read/write operations, and faking behind the scenes the configuration space of a PCI bridge. A PCI host controller driver simply has to call pci_bridge_emul_conf_read() and pci_bridge_emul_conf_write() to read/write the configuration space of the bridge. By default, the PCI bridge configuration space is simply emulated by a chunk of memory, but the PCI host controller can override the behavior of the read and write operations on a per-register basis to do additional actions if needed. We take care of complying with the behavior of the PCI configuration space registers in terms of bits that are read-write, read-only, reserved and write-1-to-clear. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-10-10PCI/P2PDMA: Support peer-to-peer memoryLogan Gunthorpe1-0/+1
Some PCI devices may have memory mapped in a BAR space that's intended for use in peer-to-peer transactions. To enable such transactions the memory must be registered with ZONE_DEVICE pages so it can be used by DMA interfaces in existing drivers. Add an interface for other subsystems to find and allocate chunks of P2P memory as necessary to facilitate transfers between two PCI peers: struct pci_dev *pci_p2pmem_find[_many](); int pci_p2pdma_distance[_many](); void *pci_alloc_p2pmem(); The new interface requires a driver to collect a list of client devices involved in the transaction then call pci_p2pmem_find() to obtain any suitable P2P memory. Alternatively, if the caller knows a device which provides P2P memory, they can use pci_p2pdma_distance() to determine if it is usable. With a suitable p2pmem device, memory can then be allocated with pci_alloc_p2pmem() for use in DMA transactions. Depending on hardware, using peer-to-peer memory may reduce the bandwidth of the transfer but can significantly reduce pressure on system memory. This may be desirable in many cases: for example a system could be designed with a small CPU connected to a PCIe switch by a small number of lanes which would maximize the number of lanes available to connect to NVMe devices. The code is designed to only utilize the p2pmem device if all the devices involved in a transfer are behind the same PCI bridge. This is because we have no way of knowing whether peer-to-peer routing between PCIe Root Ports is supported (PCIe r4.0, sec 1.3.1). Additionally, the benefits of P2P transfers that go through the RC is limited to only reducing DRAM usage and, in some cases, coding convenience. The PCI-SIG may be exploring adding a new capability bit to advertise whether this is possible for future hardware. This commit includes significant rework and feedback from Christoph Hellwig. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: fold in fix from Keith Busch <keith.busch@intel.com>: https://lore.kernel.org/linux-pci/20181012155920.15418-1-keith.busch@intel.com, to address comment from Dan Carpenter <dan.carpenter@oracle.com>, fold in https://lore.kernel.org/linux-pci/20181017160510.17926-1-logang@deltatee.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-26PCI: Initialize endpoint library before controllersAlan Douglas1-3/+3
The endpoint library must be initialized before its users, which are in drivers/pci/controllers. The endpoint initialization currently depends on link order. This corrects a kernel crash when loading the Cadence EP driver, since it calls devm_pci_epc_create() and this is only valid once the endpoint library has been initialized. Fixes: 6e0832fa432e ("PCI: Collect all native drivers under drivers/pci/controller/") Signed-off-by: Alan Douglas <adouglas@cadence.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-08PCI: Collect all native drivers under drivers/pci/controller/Shawn Lin1-5/+1
Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-24PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFsAlexander Duyck1-0/+1
Some SR-IOV PF devices provide no functionality other than acting as a means of enabling VFs. For these devices, we want to enable the VFs and assign them to guest virtual machines, but there's no need to have a driver for the PF itself. Add a new pci-pf-stub driver to claim those PF devices and provide the generic VF enable functionality. An administrator can use the sysfs "sriov_numvfs" file to enable VFs, then assign them to guests. For now I only have one example ID provided by Amazon in terms of devices that require this functionality. The general idea is that in the future we will see other devices added as vendors come up with devices where the PF is more or less just a lightweight shim used to allocate VFs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-03-19PCI: Tidy MakefilesBjorn Helgaas1-45/+24
Indent things so they line up neatly and remove extra blank lines and superfluous comments. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-31PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controllerCyrille Pitchen1-0/+1
This patch adds support to the Cadence PCIe controller in endpoint mode. Since pieces of source code are shared with the host driver (Root Complex mode), we create a new directory under drivers/pci dedicated to the Cadence PCIe controller. The common code is placed into drivers/pci/cadence/pcie-cadence.c and used by both the host and endpoint controller drivers. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-01-31PCI: Regroup all PCI related entries into drivers/pci/MakefileCyrille Pitchen1-3/+10
Clean up drivers/Makefile by moving the pci/endpoint and pci/dwc entries from drivers/Makefile into drivers/pci/Makefile. Since we don't want to introduce any dependency between CONFIG_PCI and CONFIG_PCI_ENDPOINT, we now always execute drivers/pci/Makefile. Hence all Makefiles in drivers/pci/ were updated accordingly so no file is compiled when CONFIG_PCI is not defined. Also, we add a comment to reinforce that EPC and EPF libraries must be initialized before their users. Hence built-in EPC drivers, such as those of Designware, are linked after the endpoint core libraries. Finally, we add another comment to explain why obj-y has been chosen instead of obj-$(CONFIG_PCIE_DW) to parse the dwc/ sub-folder. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-11-26Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: - topology enumeration fixes - KASAN fix - two entry fixes (not yet the big series related to KASLR) - remove obsolete code - instruction decoder fix - better /dev/mem sanity checks, hopefully working better this time - pkeys fixes - two ACPI fixes - 5-level paging related fixes - UMIP fixes that should make application visible faults more debuggable - boot fix for weird virtualization environment * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/decoder: Add new TEST instruction pattern x86/PCI: Remove unused HyperTransport interrupt support x86/umip: Fix insn_get_code_seg_params()'s return value x86/boot/KASLR: Remove unused variable x86/entry/64: Add missing irqflags tracing to native_load_gs_index() x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing x86/pkeys/selftests: Fix protection keys write() warning x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey' x86/mpx/selftests: Fix up weird arrays x86/pkeys: Update documentation about availability x86/umip: Print a warning into the syslog if UMIP-protected instructions are used x86/smpboot: Fix __max_logical_packages estimate x86/topology: Avoid wasting 128k for package id array perf/x86/intel/uncore: Cache logical pkg id in uncore driver x86/acpi: Reduce code duplication in mp_override_legacy_irq() x86/acpi: Handle SCI interrupts above legacy space gracefully x86/boot: Fix boot failure when SMP MP-table is based at 0 x86/mm: Limit mmap() of /dev/mem to valid physical addresses x86/selftests: Add test for mapping placement for 5-level paging ...
2017-11-23x86/PCI: Remove unused HyperTransport interrupt supportBjorn Helgaas1-3/+0
There are no in-tree callers of ht_create_irq(), the driver interface for HyperTransport interrupts, left. Remove the unused entry point and all the supporting code. See 8b955b0dddb3 ("[PATCH] Initial generic hypertransport interrupt support"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-pci@vger.kernel.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Link: https://lkml.kernel.org/r/20171122221337.3877.23362.stgit@bhelgaas-glaptop.roam.corp.google.com
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-06PCI: Move pci_hp_add_bridge() to drivers/pci/probe.cMika Westerberg1-3/+0
There is not much point of having a file with a single function in it. Instead we can just move pci_hp_add_bridge() to drivers/pci/probe.c and make it available always when PCI core is enabled. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: convert printk to dev_err()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-02PCI: Build setup-irq.o on all archesMatthew Minter1-15/+2
The functions included in setup-irq.o currently apply only to a selection of architectures which share common IRQ assignment code. However this code needs to be generalised for all arches to allow deferred IRQ assignment. So the first step is to build it on all architectures. Signed-off-by: Matthew Minter <matt@masarand.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-28Merge branch 'pci/resource-mmap' into nextBjorn Helgaas1-1/+1
* pci/resource-mmap: ia64: Use generic pci_mmap_resource_range() ia64: Remove redundant checks for WC in pci_mmap_page_range() ia64: Remove redundant valid_mmap_phys_addr_range() from pci_mmap_page_range() PCI: Add I/O BAR support to generic pci_mmap_resource_range() x86/PCI: Use generic pci_mmap_resource_range() unicore32/PCI: Use generic pci_mmap_resource_range() sh/PCI: Use generic pci_mmap_resource_range() parisc: Use generic pci_mmap_resource_range() mn10300/PCI: Use generic pci_mmap_resource_range() MIPS: PCI: Use generic pci_mmap_resource_range() cris/PCI: Use generic pci_mmap_resource_range() ARM/PCI: Use generic pci_mmap_resource_range() PCI: Add pci_mmap_resource_range() and use it for ARM64 PCI: Add BAR index argument to pci_mmap_page_range() PCI: Use BAR index in sysfs attr->private instead of resource pointer PCI: Add arch_can_pci_mmap_io() on architectures which can mmap() I/O space PCI: Move multiple declarations of pci_mmap_page_range() to <linux/pci.h> PCI: Add arch_can_pci_mmap_wc() macro xtensa/PCI: Do not mmap PCI BARs to userspace as write-through PCI: Only allow WC mmap on prefetchable resources PCI: Fix another sanity check bug in /proc/pci mmap PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms
2017-04-20PCI: Add pci_mmap_resource_range() and use it for ARM64David Woodhouse1-1/+1
Starting to leave behind the legacy of the pci_mmap_page_range() interface which takes "user-visible" BAR addresses. This takes just the resource and offset. For now, both APIs coexist and depending on the platform, one is implemented as a wrapper around the other. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-06MicroSemi Switchtec management interface driverLogan Gunthorpe1-0/+1
Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-15x86/platform/intel-mid: Add Power Management Unit driverAndy Shevchenko1-0/+3
Add Power Management Unit driver to handle power states of South Complex devices on Intel Tangier. In the future it might be expanded to cover North Complex devices as well. With this driver the power state of the host controllers such as SPI, I2C, UART, eMMC, and DMA would be managed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1465928985-12113-1-git-send-email-andriy.shevchenko@linux.intel.com [ Minor readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-11PCI: Provide common functions for ECAM mappingJayachandran C1-0/+2
Add config option PCI_ECAM and file drivers/pci/ecam.c to provide generic functions for accessing memory-mapped PCI config space. The API is defined in drivers/pci/ecam.h and is written to replace the API in drivers/pci/host/pci-host-common.h. The file defines a new 'struct pci_config_window' to hold the information related to a PCI config area and its mapping. This structure is expected to be used as sysdata for controllers that have ECAM based mapping. Helper functions are provided to setup the mapping, free the mapping and to implement the map_bus method in 'struct pci_ops' Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-10ARC: Add PCI supportJoao Pinto1-0/+1
Add PCI support to ARC and update drivers/pci Makefile enabling the ARC arch to use the generic PCI setup functions. [bhelgaas: fold in Joao's pci-dma-compat.h & pci-bridge.h build fix (I should have caught this myself, sorry] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-20PCI: Build setup-irq.o for arm64Jayachandran C1-0/+1
ARM64 requires setup-irq.o to provide pci_fixup_irqs() implementation. We are adding this now to support the pci-host-generic host controller, but we enable it for ARM64 PCI so that other host controllers can use this as well. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-12-16PCI: Remove PCI ioapic driverJiang Liu1-2/+0
To support IOAPIC hotplug on x86 and IA64 platforms, OS needs to figure out global interrupt source number(GSI) and IOAPIC enumeration ID through ACPI interfaces. So BIOS must implement an ACPI IOAPIC device with _GSB/_UID or _MAT method to support IOAPIC hotplug. OS also needs to figure out base physical address to access IOAPIC registers. OS may get the base physical address through PCI BARs if IOAPIC device is visible in PCI domain, otherwise OS may get the address by ACPI _CRS method if IOAPIC device is hidden from PCI domain by BIOS. When adding a PCI subtree, we need to add IOAPIC devices before enabling all other PCI devices because other PCI devices may use the IOAPIC to allocate PCI interrupts. So we plan to reimplement IOAPIC driver as an ACPI instead of PCI driver due to: 1) hot-pluggable IOAPIC devices are always visible in ACPI domain, but may or may not be visible in PCI domain. 2) we could explicitly control the order between IOAPIC and other PCI devices. We also have another choice to use a PCI driver to manage IOAPIC device if it's visible in PCI domain and use an ACPI driver if it's only visible in ACPI domain. But this solution is a little complex. It shouldn't cause serious backward compatibility issues because: 1) IOAPIC hotplug is never supported on x86 yet because it hasn't implemented the required acpi_register_ioapic() and acpi_unregister_ioapic(). 2) Currently only ACPI based IOAPIC hotplug is possible on x86 and IA64, we don't know other specifications and interfaces to support IOAPIC hotplug yet. 3) We will reimplement an ACPI IOAPIC driver to support IOAPIC hotplug. This change also helps to get rid of the false alarm on all current Linux distributions: [ 6.952497] ioapic: probe of 0000:00:05.4 failed with error -22 [ 6.959542] ioapic: probe of 0000:80:05.4 failed with error -22 Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1414387308-27148-9-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-04-02Merge branch 'x86-nuke-platforms-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 old platform removal from Peter Anvin: "This patchset removes support for several completely obsolete platforms, where the maintainers either have completely vanished or acked the removal. For some of them it is questionable if there even exists functional specimens of the hardware" Geert Uytterhoeven apparently thought this was a April Fool's pull request ;) * 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, platforms: Remove NUMAQ x86, platforms: Remove SGI Visual Workstation x86, apic: Remove support for IBM Summit/EXA chipset x86, apic: Remove support for ia32-based Unisys ES7000
2014-02-27x86, platforms: Remove SGI Visual WorkstationH. Peter Anvin1-1/+0
The SGI Visual Workstation seems to be dead; remove support so we don't have to continue maintaining it. Cc: Andrey Panin <pazke@donpac.ru> Cc: Michael Reed <mdr@sgi.com> Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-12PCI: Cleanup per-arch list of object filesLiviu Dudau1-14/+8
setup-bus.o is now included unconditionally as of commit 7dc303033425 ("PCI: Always build setup-bus when PCI is enabled"). Remove it from the per-arch list of object files. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17PCI: Add Virtual Channel to save/restore supportAlex Williamson1-1/+1
While we don't really have any infrastructure for making use of VC support, the system BIOS can configure the topology to non-default VC values prior to boot. This may be due to silicon bugs, desire to reserve traffic classes, or perhaps just BIOS bugs. When we reset devices, the VC configuration may return to default values, which can be incompatible with devices upstream. For instance, Nvidia GRID cards provide a PCIe switch and some number of GPUs, all supporting VC. The power-on default for VC is to support TC0-7 across VC0, however some platforms will only enable TC0/VC0 mapping across the topology. When we do a secondary bus reset on the downstream switch port, the GPU is reset to a TC0-7/VC0 mapping while the opposite end of the link only enables TC0/VC0. If the GPU attempts to use TC1-7, it fails. This patch attempts to provide complete support for VC save/restore, even beyond the minimally required use case above. This includes save/restore and reload of the arbitration table, save/restore and reload of the port arbitration tables, and re-enabling of the channels for VC, VC9, and MFVC capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-05-20pci: PCIe driver for Marvell Armada 370/XP systemsThomas Petazzoni1-0/+3
This driver implements the support for the PCIe interfaces on the Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to cover earlier families of Marvell SoCs, such as Dove, Orion and Kirkwood. The driver implements the hw_pci operations needed by the core ARM PCI code to setup PCI devices and get their corresponding IRQs, and the pci_ops operations that are used by the PCI core to read/write the configuration space of PCI devices. Since the PCIe interfaces of Marvell SoCs are completely separate and not linked together in a bus, this driver sets up an emulated PCI host bridge, with one PCI-to-PCI bridge as child for each hardware PCIe interface. In addition, this driver enumerates the different PCIe slots, and for those having a device plugged in, it sets up the necessary address decoding windows, using the mvebu-mbus driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-28PCI: Always build setup-bus when PCI is enabledBill Pemberton1-4/+1
CONFIG_HOTPLUG is being removed so setup-bus always needs to be built as part of PCI. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28PCI: Move pci_uevent into pci-driver.cBill Pemberton1-2/+0
With the demise of CONFIG_HOTPLUG as an option, the pci_uevent function located in hotplug.c will now always be used and doesn't need special treatment in the Makefile. Move pci_uevent into pci-driver.c and remove hotplug.c Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-13PCI: build resource code for M68K architectureGreg Ungerer1-0/+1
The ColdFire M54xx family of CPU cores (supported by the m68k arch code) have PCI bus hardware. We want to be able to use this and will need the setup-bus.c and setup-irq.c helper functions. So when CONFIG_M68K is enabled add them to the objs build list. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-21Merge tag 'pci-for-3.5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: - Host bridge cleanups from Yinghai - Disable Bus Master bit on PCI device shutdown (kexec-related) - Stratus ftServer fix - pci_dev_reset() locking fix - IvyBridge graphics erratum workaround * tag 'pci-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (21 commits) microblaze/PCI: fix "io_offset undeclared" error x86/PCI: only check for spinlock being held in SMP kernels resources: add resource_overlaps() PCI: fix uninitialized variable 'cap_mask' MAINTAINERS: update PCI git tree and patchwork PCI: disable Bus Master on PCI device shutdown PCI: work around IvyBridge internal graphics FLR erratum x86/PCI: fix unused variable warning in amd_bus.c PCI: move mutex locking out of pci_dev_reset function PCI: work around Stratus ftServer broken PCIe hierarchy x86/PCI: merge pcibios_scan_root() and pci_scan_bus_on_node() x86/PCI: dynamically allocate pci_root_info for native host bridge drivers x86/PCI: embed pci_sysdata into pci_root_info on ACPI path x86/PCI: embed name into pci_root_info struct x86/PCI: add host bridge resource release for _CRS path x86/PCI: refactor get_current_resources() PCI: add host bridge release support PCI: add generic device into pci_host_bridge struct PCI: rename pci_host_bridge() to find_pci_root_bridge() x86/PCI: fix memleak with get_current_resources() ...
2012-04-30PCI: move host bridge-related code to host-bridge.cYinghai Lu1-1/+1
Move host bridge-related code from probe.c to a new host-bridge.c. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-26pci: frv architecture needs generic setup-bus infrastructurePaul Gortmaker1-0/+1
Otherwise we get this link failure for frv's defconfig: LD .tmp_vmlinux1 drivers/built-in.o: In function `pci_assign_resource': (.text+0xbf0c): undefined reference to `pci_cardbus_resource_alignment' drivers/built-in.o: In function `pci_setup': pci.c:(.init.text+0x174): undefined reference to `pci_realloc_get_opt' pci.c:(.init.text+0x1a0): undefined reference to `pci_realloc_get_opt' make[1]: *** [.tmp_vmlinux1] Error 1 Cc: David Howells <dhowells@redhat.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-14PCI: Move ATS implementation into own fileJoerg Roedel1-0/+1
ATS does not depend on IOV support, so move the code into its own file. This file will also include support for the PRI and PASID capabilities later. Also give ATS its own Kconfig variable to allow selecting it without IOV support. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: iommu/core: Fix build with INTR_REMAP=y && CONFIG_DMAR=n iommu/amd: Don't use MSI address range for DMA addresses iommu/amd: Move missing parts to drivers/iommu iommu: Move iommu Kconfig entries to submenu x86/ia64: intel-iommu: move to drivers/iommu/ x86: amd_iommu: move to drivers/iommu/ msm: iommu: move to drivers/iommu/ drivers: iommu: move to a dedicated folder x86/amd-iommu: Store device alias as dev_data pointer x86/amd-iommu: Search for existind dev_data before allocting a new one x86/amd-iommu: Allow dev_data->alias to be NULL x86/amd-iommu: Use only dev_data in low-level domain attach/detach functions x86/amd-iommu: Use only dev_data for dte and iotlb flushing routines x86/amd-iommu: Store ATS state in dev_data x86/amd-iommu: Store devid in dev_data x86/amd-iommu: Introduce global dev_data_list x86/amd-iommu: Remove redundant device_flush_dte() calls iommu-api: Add missing header file Fix up trivial conflicts (independent additions close to each other) in drivers/Makefile and include/linux/pci.h
2011-07-22Merge branch 'of-pci' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'of-pci' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: pci/of: Consolidate pci_bus_to_OF_node() pci/of: Consolidate pci_device_to_OF_node() x86/devicetree: Use generic PCI <-> OF matching microblaze/pci: Move the remains of pci_32.c to pci-common.c microblaze/pci: Remove powermac originated cruft pci/of: Match PCI devices to OF nodes dynamically
2011-06-21x86/ia64: intel-iommu: move to drivers/iommu/Ohad Ben-Cohen1-5/+0
This should ease finding similarities with different platforms, with the intention of solving problems once in a generic framework which everyone can use. Note: to move intel-iommu.c, the declaration of pci_find_upstream_pcie_bridge() has to move from drivers/pci/pci.h to include/linux/pci.h. This is handled in this patch, too. As suggested, also drop DMAR's EXPERIMENTAL tag while we're at it. Compile-tested on x86_64. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-06-08pci/of: Match PCI devices to OF nodes dynamicallyBenjamin Herrenschmidt1-0/+2
powerpc has two different ways of matching PCI devices to their corresponding OF node (if any) for historical reasons. The ppc64 one does a scan looking for matching bus/dev/fn, while the ppc32 one does a scan looking only for matching dev/fn on each level in order to be agnostic to busses being renumbered (which Linux does on some platforms). This removes both and instead moves the matching code to the PCI core itself. It's the most logical place to do it: when a pci_dev is created, we know the parent and thus can do a single level scan for the matching device_node (if any). The benefit is that all archs now get the matching for free. There's one hook the arch might want to provide to match a PHB bus to its device node. A default weak implementation is provided that looks for the parent device device node, but it's not entirely reliable on powerpc for various reasons so powerpc provides its own. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-06-02sparc32,leon: added LEON-common low-level PCI routinesDaniel Hellstrom1-0/+1
The LEON architecture does not have a BIOS or bootloader that initializes PCI for us, instead Linux generic PCI layer is used to set up resources and IRQ. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12PCI: pci-label: Fix build failure when CONFIG_NLS is set to 'm' by allmodconfigRandy Dunlap1-2/+2
Create a kconfig option symbol for PCI_LABEL and enable it when DMI || ACPI are enabled. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-18Merge branch 'linux-next' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: label: remove #include of ACPI header to avoid warnings PCI: label: Fix compilation error when CONFIG_ACPI is unset PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. PCI: introduce reset_resource() PCI: data structure agnostic free list function PCI: refactor io size calculation code PCI: do not create quirk I/O regions below PCIBIOS_MIN_IO for ICH PCI hotplug: acpiphp: set current_state to D0 in register_slot PCI: Export ACPI _DSM provided firmware instance number and string name to sysfs PCI: add more checking to ICH region quirks PCI: aer-inject: Override PCIe AER Mask Registers PCI: fix tlan build when CONFIG_PCI is not enabled PCI: remove quirk for pre-production systems PCI: Avoid potential NULL pointer dereference in pci_scan_bridge PCI/lpc: irq and pci_ids patch for Intel DH89xxCC DeviceIDs PCI: sysfs: Fix failure path for addition of "vpd" attribute
2011-03-17unicore32 machine related files: pci bus handlingGuanXuetao1-0/+1
This patch implements arch-specific pci bus driver. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-03-04PCI: Export ACPI _DSM provided firmware instance number and string name to sysfsNarendra_K@Dell.com1-1/+2
This patch exports ACPI _DSM (Device Specific Method) provided firmware instance number and string name of PCI devices as defined by 'PCI Firmware Specification Revision 3.1' section 4.6.7.( DSM for Naming a PCI or PCI Express Device Under Operating Systems) to sysfs. New files created are: /sys/bus/pci/devices/.../label which contains the firmware name for the device in question, and /sys/bus/pci/devices/.../acpi_index which contains the firmware device type instance for the given device. cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/acpi_index 1 cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/label Embedded Broadcom 5709C NIC 1 cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/acpi_index 2 cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/label Embedded Broadcom 5709C NIC 2 The ACPI _DSM provided firmware 'instance number' and 'string name' will be given priority if the firmware also provides 'SMBIOS type 41 device type instance and string'. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com> Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-24pci root complex: support for tile architectureChris Metcalf1-0/+1
This change enables PCI root complex support for TILEPro. Unlike TILE-Gx, TILEPro has no support for memory-mapped I/O, so the PCI support consists of hypervisor upcalls for PIO, DMA, etc. However, the performance is fine for the devices we have tested with so far (1Gb Ethernet, SATA, etc.). The <asm/io.h> header was tweaked to be a little bit more aggressive about disabling attempts to map/unmap IO port space. The hacky <asm/pci-bridge.h> header was rolled into the <asm/pci.h> header and the result was simplified. Both of the latter two headers were preliminary versions not meant for release before now - oh well. There is one quirk for our TILEmpower platform, which accidentally negotiates up to 5GT and needs to be kicked down to 2.5GT. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-10-28Merge branch 'stable/xen-pcifront-0.8.2' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
2010-10-18xen-pcifront: Xen PCI frontend driver.Ryan Wilson1-0/+2
This is a port of the 2.6.18 Xen PCI front driver with fixes to make it build under 2.6.34 and later (for the full list of changes: git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git historic/xen-pcifront-0.1). It also includes the fixes to make it work properly. [v2: Updated Kconfig, removed crud, added Reviewed-by] [v3: Added 'static', fixed grant table leak, redid Kconfig] [v4: Added one more 'static' and removed comments] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Jan Beulich <JBeulich@novell.com>