summaryrefslogtreecommitdiffstats
path: root/drivers/parisc
AgeCommit message (Collapse)AuthorFilesLines
2020-04-05parisc: Replace setup_irq() by request_irq()afzal mohammed1-6/+2
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan1-9/+8
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig6-11/+11
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-10-14parisc: Remove 32-bit DMA enforcement from sba_iommuSven Schnelle1-8/+0
This breaks booting from sata_sil24 with the recent DMA change. According to James Bottomley this was in to improve performance by kicking the device into 32 bit descriptors, which are usually more efficient, especially with older dual descriptor format cards like we have on parisc systems. Remove it for now to make DMA working again. Fixes: dcc02c19cc06 ("sata_sil24: use dma_set_mask_and_coherent") Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-0/+2
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-08parisc: Disable HP HSC-PCI Cards to prevent kernel crashHelge Deller1-0/+24
The HP Dino PCI controller chip can be used in two variants: as on-board controller (e.g. in B160L), or on an Add-On card ("Card-Mode") to bridge PCI components to systems without a PCI bus, e.g. to a HSC/GSC bus. One such Add-On card is the HP HSC-PCI Card which has one or more DEC Tulip PCI NIC chips connected to the on-card Dino PCI controller. Dino in Card-Mode has a big disadvantage: All PCI memory accesses need to go through the DINO_MEM_DATA register, so Linux drivers will not be able to use the ioremap() function. Without ioremap() many drivers will not work, one example is the tulip driver which then simply crashes the kernel if it tries to access the ports on the HP HSC card. This patch disables the HP HSC card if it finds one, and as such fixes the kernel crash on a HP D350/2 machine. Signed-off-by: Helge Deller <deller@gmx.de> Noticed-by: Phil Scarr <phil.scarr@pm.me> Cc: stable@vger.kernel.org
2019-09-06parisc: Save some bytes in dino driverHelge Deller1-3/+3
Signed-off-by: Helge Deller <deller@gmx.de>
2019-09-05parisc: Convert eisa_enumerator to use pr_cont()Helge Deller1-5/+5
Clean up and beautify kernel output by using pr_cont() and printk formats like %pR for resources. This was noticed on a HP D350/2 machine. Signed-off-by: Helge Deller <deller@gmx.de>
2019-09-05parisc: Avoid warning when loading hppb driverHelge Deller1-6/+5
ccio_request_resource() may fail to allocate regions for the hppb driver. Do not print a misleading warning in this case. This was noticed on a HP D350/2 machine. Signed-off-by: Helge Deller <deller@gmx.de>
2019-09-04parisc: don't set ARCH_NO_COHERENT_DMA_MMAPChristoph Hellwig2-2/+0
parisc is the only architecture that sets ARCH_NO_COHERENT_DMA_MMAP when an MMU is enabled. AFAIK this is because parisc CPUs use VIVT caches, which means exporting normally cachable memory to userspace is relatively dangrous due to cache aliasing. But normally cachable memory is only allocated by dma_alloc_coherent on parisc when using the sba_iommu or ccio_iommu drivers, so just remove the .mmap implementation for them so that we don't have to set ARCH_NO_COHERENT_DMA_MMAP, which I plan to get rid of. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04dma-mapping: explicitly wire up ->mmap and ->get_sgtableChristoph Hellwig2-0/+4
While the default ->mmap and ->get_sgtable implementations work for the majority of our dma_map_ops impementations they are inherently safe for others that don't use the page allocator or CMA and/or use their own way of remapping not covered by the common code. So remove the defaults if these methods are not wired up, but instead wire up the default implementations for all safe instances. Fixes: e1c7e324539a ("dma-mapping: always provide the dma_map_ops based implementation") Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-08Merge tag 'spdx-5.2-rc4' of ↵Linus Torvalds1-14/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
2019-06-06Merge branch 'parisc-5.2-3' of ↵Linus Torvalds2-7/+4
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Fix crashes when accessing PCI devices on some machines like C240 and J5000. The crashes were triggered because we replaced cache flushes by nops in the alternative coding where we shouldn't for some machines. - Dave fixed a race in the usage of the sr1 space register when used to load the coherence index. - Use the hardware lpa instruction to to load the physical address of kernel virtual addresses in the iommu driver code. - The kernel may fail to link when CONFIG_MLONGCALLS isn't set. Solve that by rearranging functions in the final vmlinux executeable. - Some defconfig cleanups and removal of compiler warnings. * 'parisc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix crash due alternative coding for NP iopdir_fdc bit parisc: Use lpa instruction to load physical addresses in driver code parisc: configs: Remove useless UEVENT_HELPER_PATH parisc: Use implicit space register selection for loading the coherence index of I/O pdirs parisc: Fix compiler warnings in float emulation code parisc/slab: cleanup after /proc/slab_allocators removal parisc: Allow building 64-bit kernel without -mlong-calls compiler option parisc: Kconfig: remove ARCH_DISCARD_MEMBLOCK
2019-06-06parisc: Use lpa instruction to load physical addresses in driver codeJohn David Anglin2-2/+2
Most I/O in the kernel is done using the kernel offset mapping. However, there is one API that uses aliased kernel address ranges: > The final category of APIs is for I/O to deliberately aliased address > ranges inside the kernel. Such aliases are set up by use of the > vmap/vmalloc API. Since kernel I/O goes via physical pages, the I/O > subsystem assumes that the user mapping and kernel offset mapping are > the only aliases. This isn't true for vmap aliases, so anything in > the kernel trying to do I/O to vmap areas must manually manage > coherency. It must do this by flushing the vmap range before doing > I/O and invalidating it after the I/O returns. For this reason, we should use the hardware lpa instruction to load the physical address of kernel virtual addresses in the driver code. I believe we only use the vmap/vmalloc API with old PA 1.x processors which don't have a sba, so we don't hit this problem. Tested on c3750, c8000 and rp3440. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-06parisc: Use implicit space register selection for loading the coherence ↵John David Anglin2-5/+2
index of I/O pdirs We only support I/O to kernel space. Using %sr1 to load the coherence index may be racy unless interrupts are disabled. This patch changes the code used to load the coherence index to use implicit space register selection. This saves one instruction and eliminates the race. Tested on rp3440, c8000 and c3750. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217Thomas Gleixner1-2/+1
Based on 1 normalized pattern(s): distributed under the terms of the gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171439.671734884@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner2-30/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner14-66/+14
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03parisc: Skip registering LED when running in QEMUHelge Deller1-0/+3
No need to spend CPU cycles when we run on QEMU. Signed-off-by: Helge Deller <deller@gmx.de> CC: stable@vger.kernel.org # v4.9+
2019-04-06Revert: parisc: Use F_EXTEND() macro in iosapic codeHelge Deller1-1/+5
Revert parts of commit 97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in iosapic code"). It breaks booting the 32-bit kernel on some machines. Reported-by: Sven Schnelle <svens@stackframe.org> Tested-by: Sven Schnelle <svens@stackframe.org> Fixes: 97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in iosapic code") Signed-off-by: Helge Deller <deller@gmx.de>
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-2/+2
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-02-21parisc: Use F_EXTEND() macro in iosapic codeHelge Deller1-16/+1
and reduce include file list. Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-21parisc: remove the HBA_DATA macroChristoph Hellwig2-6/+9
No need to hide a cast in a macro, especially as all users have cleaner ways to archive the result than blind casting. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-21parisc/lba_pci: use container_of in LBA_DEVChristoph Hellwig1-6/+4
Use the type safe container_of macros instead of a blind cast in LBA_DEV, and turn the macro into an inline function. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-21parisc/dino: use container_of in DINO_DEVChristoph Hellwig1-6/+4
Use the type safe container_of macros instead of a blind cast in DINO_DEV, and turn the macro into an inline function. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-21parisc: properly type the return value of parisc_walk_treeChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-21parisc: turn GET_IOC into an inline functionChristoph Hellwig1-4/+8
This makes the function both more readable and more typesafe. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-21parisc: move internal implementation details out of <asm/dma-mapping.h>Christoph Hellwig7-0/+62
Move everything that is not required for the public facing DMA API out of <asm/dma-mapping.h> and into a new drivers/parisc/iommu.h header. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-21parisc: Hide built-in serial aux port of Tosca GSP cardHelge Deller1-0/+12
Similar to commit bcf3f1752a62 ("parisc: Hide Diva-built-in serial aux and graphics card") it's better to hide the built-in serial AUX port at bootup. When not hiding the port, the Linux serial driver will try to manage this port and fails on a A500 server like this: serial 0000:00:05.0: enabling device (0000 -> 0003) serial 0000:00:05.0: enabling SERR and PARITY (0003 -> 0143) 0000:00:05.0: ttyS3 at MMIO 0xfffffffff8005000 (irq = 71, base_baud = 115200) is a 16550A serial 0000:00:05.0: Couldn't register serial port 0, irq 71, type 2, error -28 Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-20ccio: allow large DMA masksChristoph Hellwig1-2/+2
There is no harm in setting a 64-bit mask even if we don't need it, and the current ccio code is one of the few place in the kernel still rejecting larger than required DMA masks. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-29Merge tag 'kconfig-v4.21-2' of ↵Linus Torvalds1-23/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig file consolidation from Masahiro Yamada: "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by Christoph Hellwig. Currently, every architecture that wants to provide common peripheral busses needs to add some boilerplate code and include the right Kconfig files. This series instead just selects the presence (when needed) and then handles everything in the bus-specific Kconfig file under drivers/" * tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: pcmcia: remove per-arch PCMCIA config entry eisa: consolidate EISA Kconfig entry in drivers/eisa rapidio: consolidate RAPIDIO config entry in drivers/rapidio pcmcia: allow PCMCIA support independent of the architecture PCI: consolidate the PCI_SYSCALL symbol PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options PCI: consolidate PCI config entry in drivers/pci MIPS: remove the HT_PCI config option
2018-12-28Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-4/+4
Merge misc updates from Andrew Morton: - large KASAN update to use arm's "software tag-based mode" - a few misc things - sh updates - ocfs2 updates - just about all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits) kernel/fork.c: mark 'stack_vm_area' with __maybe_unused memcg, oom: notify on oom killer invocation from the charge path mm, swap: fix swapoff with KSM pages include/linux/gfp.h: fix typo mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization memory_hotplug: add missing newlines to debugging output mm: remove __hugepage_set_anon_rmap() include/linux/vmstat.h: remove unused page state adjustment macro mm/page_alloc.c: allow error injection mm: migrate: drop unused argument of migrate_page_move_mapping() blkdev: avoid migration stalls for blkdev pages mm: migrate: provide buffer_migrate_page_norefs() mm: migrate: move migrate_page_lock_buffers() mm: migrate: lock buffers before migrate_page_move_mapping() mm: migration: factor out code to compute expected number of page references mm, page_alloc: enable pcpu_drain with zone capability kmemleak: add config to select auto scan mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init ...
2018-12-28mm: convert totalram_pages and totalhigh_pages variables to atomicArun KS2-4/+4
totalram_pages and totalhigh_pages are made static inline function. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes better to remove the lock and convert variables to atomic, with preventing poteintial store-to-read tearing as a bonus. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Suggested-by: Michal Hocko <mhocko@suse.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-06parisc/sba_iommu: remove the mapping_error dma_map_ops methodChristoph Hellwig1-9/+1
The SBA iommu code already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-06parisc/ccio: remove the mapping_error dma_map_ops methodChristoph Hellwig1-9/+1
The CCIO iommu code already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-23eisa: consolidate EISA Kconfig entry in drivers/eisaChristoph Hellwig1-10/+1
Let architectures opt into EISA support by selecting HAVE_EISA and handle everything else in drivers/eisa. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-23pcmcia: allow PCMCIA support independent of the architectureChristoph Hellwig1-2/+0
There is nothing architecture specific in the PCMCIA core, so allow building it everywhere. The actual host controllers will depend on ISA, PCI or a specific SOC. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-23PCI: consolidate PCI config entry in drivers/pciChristoph Hellwig1-11/+0
There is no good reason to duplicate the PCI menu in every architecture. Instead provide a selectable HAVE_PCI symbol that indicates availability of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the rest in drivers/pci. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-17parisc: Add alternative coding infrastructureHelge Deller2-19/+10
This patch adds the necessary code to patch a running kernel at runtime to improve performance. The current implementation offers a few optimizations variants: - When running a SMP kernel on a single UP processor, unwanted assembler statements like locking functions are overwritten with NOPs. When multiple instructions shall be skipped, one branch instruction is used instead of multiple nop instructions. - In the UP case, some pdtlb and pitlb instructions are patched to become pdtlb,l and pitlb,l which only flushes the CPU-local tlb entries instead of broadcasting the flush to other CPUs in the system and thus may improve performance. - fic and fdc instructions are skipped if no I- or D-caches are installed. This should speed up qemu emulation and cacheless systems. - If no cache coherence is needed for IO operations, the relevant fdc and sync instructions in the sba and ccio drivers are replaced by nops. - On systems which share I- and D-TLBs and thus don't have a seperate instruction TLB, the pitlb instruction is replaced by a nop. Live-patching is done early in the boot process, just after having run the system inventory. No drivers are running and thus no external interrupts should arrive. So the hope is that no TLB exceptions will occur during the patching. If this turns out to be wrong we will probably need to do the patching in real-mode. Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17parisc: Ratelimit dino stuck interrupt warningsHelge Deller1-2/+1
While playing with qemu with an emulated RT8139cp NIC, I faced lots of the following warnings: Dino 0x00810000: stuck interrupt 2 This patch ratelimits this warning and reports back that the IRQ was handled. Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17parisc: dino: Utilize DINO_MASK_IRQ() macroHelge Deller1-1/+1
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17parisc: remove the dead ccio-rm-dma driverChristoph Hellwig2-205/+0
This driver has never been wired up due to the life of the Linux git tree, and has severely bitrotted. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds3-9/+0
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-06-04Merge branch 'hch.procfs' of ↵Linus Torvalds2-60/+6
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-05-18parisc: Move ccio_cujo20_fixup() into init sectionHelge Deller1-1/+1
ccio_cujo20_fixup() is called by dino_probe() only, which is in init section already. Signed-off-by: Helge Deller <deller@gmx.de>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig2-60/+6
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-09iommu-helper: mark iommu_is_span_boundary as inlineChristoph Hellwig1-5/+0
This avoids selecting IOMMU_HELPER just for this function. And we only use it once or twice in normal builds so this often even is a size reduction. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-07PCI: remove PCI_DMA_BUS_IS_PHYSChristoph Hellwig2-4/+0
This was used by the ide, scsi and networking code in the past to determine if they should bounce payloads. Now that the dma mapping always have to support dma to all physical memory (thanks to swiotlb for non-iommu systems) there is no need to this crude hack any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv) Reviewed-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 02:49:06 +0000