summaryrefslogtreecommitdiffstats
path: root/drivers/opp
AgeCommit message (Collapse)AuthorFilesLines
2022-08-16OPP: Fix an un-initialized variable usageChristophe JAILLET1-1/+1
smatch complains that 'ret' may be returned un-initialized. Explicitly return 0 if we reach the end of the function (should 'opp_table->clk_count' be 0). Fixes: 8174a3a613af ("OPP: Provide a simple implementation to configure multiple clocks") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-08-03Merge tag 'opp-updates-5.20-rc1' of ↵Rafael J. Wysocki6-922/+971
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) updates for 5.20-rc1 from Viresh Kumar: "- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh Kumar). - Add dev_pm_opp_set_config() and friends and migrate other users/helpers to using them (Viresh Kumar). - Add support for multiple clocks for a device (Viresh Kumar and Krzysztof Kozlowski). - Configure resources before adding OPP table for Venus (Stanimir Varbanov). - Keep reference count up for opp->np and opp_table->np while they are still in use (Liang He). - Minor cleanups (Viresh Kumar and Yang Li)." * tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (43 commits) venus: pm_helpers: Fix warning in OPP during probe OPP: Don't drop opp->np reference while it is still in use OPP: Don't drop opp_table->np reference while it is still in use OPP: Remove dev{m}_pm_opp_of_add_table_noclk() PM / devfreq: tegra30: Register config_clks helper OPP: Allow config_clks helper for single clk case OPP: Provide a simple implementation to configure multiple clocks OPP: Assert clk_count == 1 for single clk helpers OPP: Add key specific assert() method to key finding helpers OPP: Compare bandwidths for all paths in _opp_compare_key() OPP: Allow multiple clocks for a device dt-bindings: opp: accept array of frequencies OPP: Make dev_pm_opp_set_opp() independent of frequency OPP: Reuse _opp_compare_key() in _opp_add_static_v2() OPP: Remove rate_not_available parameter to _opp_add() OPP: Use consistent names for OPP table instances OPP: Use generic key finding helpers for bandwidth key OPP: Use generic key finding helpers for level key OPP: Add generic key finding helpers and use them for freq APIs OPP: Remove dev_pm_opp_find_freq_ceil_by_volt() ...
2022-07-19OPP: Don't drop opp->np reference while it is still in useLiang He3-8/+12
The struct dev_pm_opp contains a reference of the DT node, opp->np, throughout its lifetime. We should increase the refcount for the same from _opp_add_static_v2(), and drop it while removing the OPP finally. Signed-off-by: Liang He <windhl@126.com> [ Viresh: Updated subject / commit log, create _of_clear_opp() and drop reference from it] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-19OPP: Don't drop opp_table->np reference while it is still in useLiang He1-1/+1
The OPP table contains a reference of the DT node, opp_table->np, throughout its lifetime. We shouldn't drop the refcount for the same from _of_init_opp_table(), but do that while removing the OPP table finally. Signed-off-by: Liang He <windhl@126.com> [ Viresh: Updated subject / commit log and drop reference from _of_clear_opp_table() ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-15PM: EM: convert power field to micro-Watts precision and align driversLukasz Luba1-7/+8
The milli-Watts precision causes rounding errors while calculating efficiency cost for each OPP. This is especially visible in the 'simple' Energy Model (EM), where the power for each OPP is provided from OPP framework. This can cause some OPPs to be marked inefficient, while using micro-Watts precision that might not happen. Update all EM users which access 'power' field and assume the value is in milli-Watts. Solve also an issue with potential overflow in calculation of energy estimation on 32bit machine. It's needed now since the power value (thus the 'cost' as well) are higher. Example calculation which shows the rounding error and impact: power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000 power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18 power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961 power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21 max_freq = 2000MHz cost_a_mW = 18 * 2000MHz/500MHz = 72 cost_a_uW = 18000 * 2000MHz/500MHz = 72000 cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better cost_b_uW = 21961 * 2000MHz/600MHz = 73203 The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly better that the 'cost_b_uW' (this patch uses micro-Watts) and such would have impact on the 'inefficient OPPs' information in the Cpufreq framework. This patch set removes the rounding issue. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-12OPP: Remove dev{m}_pm_opp_of_add_table_noclk()Viresh Kumar1-40/+8
Remove the now unused variants and the now unnecessary "getclk" parameter from few routines. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Allow config_clks helper for single clk caseViresh Kumar1-4/+4
There is a corner case with Tegra30, where we want to skip clk configuration via dev_pm_opp_set_opp(), but still want the OPP core to read the "opp-hz" property so we can find the right OPP via freq finding helpers. This is the easiest of the ways to make it work, without any special hacks in the OPP core. Allow config_clks to be passed for single clk case. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Provide a simple implementation to configure multiple clocksViresh Kumar1-0/+34
This provides a simple implementation to configure multiple clocks for a device. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Assert clk_count == 1 for single clk helpersViresh Kumar1-6/+39
Many helpers can be safely called only for devices that have a single clk associated with them. Assert the same for those routines. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Add key specific assert() method to key finding helpersViresh Kumar1-19/+33
The helpers for the clock key, at least, would need to assert that the helpers are called only for single clock case. Prepare for that by adding an argument to the key finding helpers. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Compare bandwidths for all paths in _opp_compare_key()Viresh Kumar1-3/+17
Replicate the same behavior as "rates" here and compare all values instead of relying on the first entry alone. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Allow multiple clocks for a deviceViresh Kumar4-82/+240
This patch adds support to allow multiple clocks for a device. The design is pretty much similar to how this is done for regulators, and platforms can supply their own version of the config_clks() callback if they have multiple clocks for their device. The core manages the calls via opp_table->config_clks() eventually. We have kept both "clk" and "clks" fields in the OPP table structure and the reason is provided as a comment in _opp_set_clknames(). The same isn't done for "rates" though and we use rates[0] at most of the places now. Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Make dev_pm_opp_set_opp() independent of frequencyViresh Kumar2-16/+40
dev_pm_opp_set_opp() can be called for any device, it may or may not have a frequency value associated with it. If a frequency value isn't available, we pass 0 to _set_opp(). Make it optional instead by making _set_opp() accept a pointer instead, as the frequency value is anyway available in the OPP. This makes dev_pm_opp_set_opp() and _set_opp() completely independent of any special key value. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Reuse _opp_compare_key() in _opp_add_static_v2()Viresh Kumar2-2/+8
Reuse _opp_compare_key() in _opp_add_static_v2() instead of just comparing frequency while finding suspend frequency. Also add a comment over _opp_compare_key() explaining its return values. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Remove rate_not_available parameter to _opp_add()Viresh Kumar3-9/+7
commit 32715be4fe95 ("opp: Fix adding OPP entries in a wrong order if rate is unavailable") removed the only user of this field, get rid of rest of it now. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Use consistent names for OPP table instancesViresh Kumar3-15/+16
The OPP table is called "opp_table" at most of the places and "table" at few. Make all of them follow the same naming convention, "opp_table". Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Use generic key finding helpers for bandwidth keyViresh Kumar1-68/+15
Use the recently added generic key findings helpers to find bandwidth key values. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Use generic key finding helpers for level keyViresh Kumar1-53/+10
Use the recently added generic key findings helpers to find level key values. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Add generic key finding helpers and use them for freq APIsViresh Kumar1-99/+130
There are three type of helpers, to find exact, ceil, and floor values, replicated for multiple key types, freq, level, bw. And all of these helpers share a lot of boilerplate code. Add generic key finding helpers to reduce code redundancy. Also update the freq finder helpers to use the new infrastructure. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()Viresh Kumar1-54/+0
This was added few years back, but the code that was supposed to use it never got merged. Remove the unused helper. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Remove custom OPP helper supportViresh Kumar2-137/+2
The only user of the custom helper is migrated to use dev_pm_opp_set_config_regulators() interface. Remove the now unused custom OPP helper support. This cleans up _set_opp() and leaves a single code path to be used by all users. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: ti: Migrate to dev_pm_opp_set_config_regulators()Viresh Kumar1-41/+34
The OPP core now provides dev_pm_opp_set_config_regulators() interface, which needs the platforms to just set the OPP voltages instead of both clk and voltage. The clock is set by the OPP core instead and hence reduces code redundancy. Migrate the only user of the custom set_opp() to dev_pm_opp_set_config_regulators(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Add dev_pm_opp_get_supplies()Viresh Kumar1-0/+25
We already have an API for getting voltage information for a single regulator, dev_pm_opp_get_voltage(), but there is nothing available for multiple regulator case. This patch adds a new API, dev_pm_opp_get_supplies(), to get all information related to the supplies for an OPP. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Make _generic_set_opp_regulator() a config_regulators() interfaceViresh Kumar1-39/+12
In order to reuse the same code path, i.e. clk_set_rate() from _set_opp(), migrate _generic_set_opp_regulator() to implement a config_regulators() interface. It is renamed to _opp_config_regulator_single() and is set as the preferred config_regulators() interface whenever we have a single regulator available. Note that this also drops code responsible for restoring the voltage/freq in case of errors. We aren't handling that properly currently, restoring only some of the resources while leaving others out (like bandwidth and required OPPs). It is better to drop all of it instead of partial restoration. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Add support for config_regulators() helperViresh Kumar2-1/+69
Extend the dev_pm_opp_set_config() interface to allow adding config_regulators() helpers. This helper will be called to set the voltages of the regulators from the regular path in _set_opp(), while we are trying to change the OPP. This will eventually replace the custom set_opp() helper. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-prop-name helper API to use set-config helpersViresh Kumar1-37/+18
Now that we have a central API to handle all OPP table configurations, migrate the set-prop-name family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Acked-by: Samuel Holland <samuel@sholland.org> # sun50i Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate attach-genpd API to use set-config helpersViresh Kumar1-67/+18
Now that we have a central API to handle all OPP table configurations, migrate the attach-genpd family of helpers to use the new infrastructure. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-opp-helper API to use set-config helpersViresh Kumar2-72/+23
Now that we have a central API to handle all OPP table configurations, migrate the set-opp-helper family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Remove devm_pm_opp_register_set_opp_helper() as it has no users currently. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-clk-name API to use set-config helpersViresh Kumar1-99/+43
Now that we have a central API to handle all OPP table configurations, migrate the set-clk-name family of helpers to use the new infrastructure. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-supported-hw API to use set-config helpersViresh Kumar1-67/+20
Now that we have a central API to handle all OPP table configurations, migrate the set-supported-hw family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-regulators API to use set-config helpersViresh Kumar1-72/+19
Now that we have a central API to handle all OPP table configurations, migrate the set-regulators family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Add dev_pm_opp_set_config() and friendsViresh Kumar2-1/+249
The OPP core already have few configuration specific APIs and it is getting complex or messy for both the OPP core and its users. Lets introduce a new set of API which will be used for all kind of different configurations, and shall eventually be used by all the existing ones. The new API, returns a unique token instead of a pointer to the OPP table, which allows the OPP core to drop the resources selectively later on. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Make dev_pm_opp_set_regulators() accept NULL terminated listViresh Kumar1-6/+12
Make dev_pm_opp_set_regulators() accept a NULL terminated list of names instead of making the callers keep the two parameters in sync, which creates an opportunity for bugs to get in. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Steven Price <steven.price@arm.com> # panfrost Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-09OPP: Track if clock name is configured by platformViresh Kumar2-0/+9
Track if the clock name is configured by the platform or not. This is a preparatory change and will be used by later commits. This also makes the behavior of the clkname API similar to other ones, which allow repeated calls to the same API for each CPU. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-09OPP: Fix typo in commentViresh Kumar1-1/+1
Replace rate with state. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-06opp: Fix some kernel-doc commentsYang Li1-2/+2
Make @freq to @bw in dev_pm_opp_find_bw_ceil() and dev_pm_opp_find_bw_floor() kernel-doc comment to remove warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/opp/core.c:753: warning: Function parameter or member 'bw' not described in 'dev_pm_opp_find_bw_ceil' drivers/opp/core.c:753: warning: Excess function parameter 'freq' description in 'dev_pm_opp_find_bw_ceil' drivers/opp/core.c:812: warning: Function parameter or member 'bw' not described in 'dev_pm_opp_find_bw_floor' drivers/opp/core.c:812: warning: Excess function parameter 'freq' description in 'dev_pm_opp_find_bw_floor' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-06opp: Fix error check in dev_pm_opp_attach_genpd()Tang Bin1-2/+2
dev_pm_domain_attach_by_name() may return NULL in some cases, so IS_ERR() doesn't meet the requirements. Thus fix it. Fixes: 6319aee10e53 ("opp: Attach genpds to devices from within OPP core") Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> [ Viresh: Replace ENODATA with ENODEV ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-05-25Merge tag 'opp-updates-5.19-rc1' of ↵Rafael J. Wysocki3-116/+235
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP (Operating Performance Points) updates for 5.19-rc1 from Viresh Kumar: - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine Oudjana). - Use list iterator only inside the list_for_each_entry loop (Xiaomeng Tong, and Jakob Koschel). - New APIs related to finding OPP based on interconnect bandwidth (Krzysztof Kozlowski). - Fix the missing of_node_put() in _bandwidth_supported() (Dan Carpenter). - Cleanups (Krzysztof Kozlowski, and Viresh Kumar). * tag 'opp-updates-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Reorder definition of ceil/floor helpers opp: Add apis to retrieve opps with interconnect bandwidth dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM opp: use list iterator only inside the loop opp: replace usage of found with dedicated list iterator variable PM: opp: simplify with dev_err_probe() OPP: call of_node_put() on error path in _bandwidth_supported()
2022-05-04opp: Reorder definition of ceil/floor helpersViresh Kumar1-97/+97
Reorder the helpers to keep all freq specific ones, followed by level and bw. No functional change. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-05-04opp: Add apis to retrieve opps with interconnect bandwidthKrzysztof Kozlowski1-0/+120
Add dev_pm_opp_find_bw_ceil and dev_pm_opp_find_bw_floor to retrieve opps based on interconnect associated with the opp and bandwidth. The index variable is the index of the interconnect as specified in the opp table in Devicetree. Co-developed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-13PM: EM: Change the order of arguments in the .active_power() callbackLukasz Luba1-3/+3
The .active_power() callback passes the device pointer when it's called. Aligned with a convetion present in other subsystems and pass the 'dev' as a first argument. It looks more cleaner. Adjust all affected drivers which implement that API callback. Suggested-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-11opp: use list iterator only inside the loopXiaomeng Tong1-3/+7
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate dedicated pointer variable [1]. In this case, use a new variable 'iter' as the list iterator, while use the old variable 'new_dev' as a dedicated pointer to point to the found entry. And BUG_ON(!new_dev);. [1]: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-11opp: replace usage of found with dedicated list iterator variableJakob Koschel1-6/+5
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-11PM: opp: simplify with dev_err_probe()Krzysztof Kozlowski1-9/+5
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-11OPP: call of_node_put() on error path in _bandwidth_supported()Dan Carpenter1-1/+1
This code does not call of_node_put(opp_np) if of_get_next_available_child() returns NULL. But it should. Fixes: 45679f9b508f ("opp: Don't parse icc paths unnecessarily") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-03-03OPP: Add support of "opp-microwatt" for EM registrationLukasz Luba1-1/+60
The Energy Model (EM) can be created based on DT entry: 'dynamic-power-coefficient'. It's a 'simple' EM which is limited to the dynamic power. It has to fit into the math formula which requires also information about voltage. Some of the platforms don't expose voltage information, thus it's not possible to use EM registration using DT. This patch aims to fix it. It introduces new implementation of the EM registration callback. The new mechanism relies on the new OPP feature allowing to get power (which is coming from "opp-microwatt" DT property) expressed in micro-Watts. The patch also opens new opportunity to better support platforms, which have a decent static power. It allows to register the EM based on real power measurements which models total power (static + dynamic), so better reflects real HW. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-03-03OPP: Add "opp-microwatt" supporting codeLukasz Luba3-2/+73
Add new property to the OPP: power value. The OPP entry in the DT can have "opp-microwatt". Add the needed code to handle this new property in the existing infrastructure. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-02-11opp: Expose of-node's name in debugfsViresh Kumar2-0/+6
It is difficult to find which OPPs are active at the moment, specially if there are multiple OPPs with same frequency available in the device tree (controlled by supported hardware feature). Expose name of the DT node to find out the exact OPP. While at it, also expose level field. Reported-by: Leo Yan <leo.yan@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-08opp: Fix return in _opp_add_static_v2()YueHaibing1-1/+1
Fix sparse warning: drivers/opp/of.c:924 _opp_add_static_v2() warn: passing zero to 'ERR_PTR' For duplicate OPPs 'ret' be set to zero. Fixes: deac8703da5f ("PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-04opp: Add more resource-managed variants of dev_pm_opp_of_add_table()Dmitry Osipenko1-7/+39
Add resource-managed variants of dev_pm_opp_of_add_table_indexed() and dev_pm_opp_of_add_table_noclk(), allowing drivers to remove boilerplate code. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [ Viresh: Added underscore to devm_of_add_table_indexed() ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>