summaryrefslogtreecommitdiffstats
path: root/drivers/opp/core.c
AgeCommit message (Collapse)AuthorFilesLines
2022-07-19OPP: Don't drop opp->np reference while it is still in useLiang He1-1/+1
The struct dev_pm_opp contains a reference of the DT node, opp->np, throughout its lifetime. We should increase the refcount for the same from _opp_add_static_v2(), and drop it while removing the OPP finally. Signed-off-by: Liang He <windhl@126.com> [ Viresh: Updated subject / commit log, create _of_clear_opp() and drop reference from it] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Allow config_clks helper for single clk caseViresh Kumar1-4/+4
There is a corner case with Tegra30, where we want to skip clk configuration via dev_pm_opp_set_opp(), but still want the OPP core to read the "opp-hz" property so we can find the right OPP via freq finding helpers. This is the easiest of the ways to make it work, without any special hacks in the OPP core. Allow config_clks to be passed for single clk case. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Provide a simple implementation to configure multiple clocksViresh Kumar1-0/+34
This provides a simple implementation to configure multiple clocks for a device. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Assert clk_count == 1 for single clk helpersViresh Kumar1-6/+39
Many helpers can be safely called only for devices that have a single clk associated with them. Assert the same for those routines. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Add key specific assert() method to key finding helpersViresh Kumar1-19/+33
The helpers for the clock key, at least, would need to assert that the helpers are called only for single clock case. Prepare for that by adding an argument to the key finding helpers. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Compare bandwidths for all paths in _opp_compare_key()Viresh Kumar1-3/+17
Replicate the same behavior as "rates" here and compare all values instead of relying on the first entry alone. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Allow multiple clocks for a deviceViresh Kumar1-58/+155
This patch adds support to allow multiple clocks for a device. The design is pretty much similar to how this is done for regulators, and platforms can supply their own version of the config_clks() callback if they have multiple clocks for their device. The core manages the calls via opp_table->config_clks() eventually. We have kept both "clk" and "clks" fields in the OPP table structure and the reason is provided as a comment in _opp_set_clknames(). The same isn't done for "rates" though and we use rates[0] at most of the places now. Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Make dev_pm_opp_set_opp() independent of frequencyViresh Kumar1-14/+38
dev_pm_opp_set_opp() can be called for any device, it may or may not have a frequency value associated with it. If a frequency value isn't available, we pass 0 to _set_opp(). Make it optional instead by making _set_opp() accept a pointer instead, as the frequency value is anyway available in the OPP. This makes dev_pm_opp_set_opp() and _set_opp() completely independent of any special key value. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Reuse _opp_compare_key() in _opp_add_static_v2()Viresh Kumar1-0/+6
Reuse _opp_compare_key() in _opp_add_static_v2() instead of just comparing frequency while finding suspend frequency. Also add a comment over _opp_compare_key() explaining its return values. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Remove rate_not_available parameter to _opp_add()Viresh Kumar1-2/+2
commit 32715be4fe95 ("opp: Fix adding OPP entries in a wrong order if rate is unavailable") removed the only user of this field, get rid of rest of it now. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Use consistent names for OPP table instancesViresh Kumar1-3/+4
The OPP table is called "opp_table" at most of the places and "table" at few. Make all of them follow the same naming convention, "opp_table". Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Use generic key finding helpers for bandwidth keyViresh Kumar1-68/+15
Use the recently added generic key findings helpers to find bandwidth key values. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Use generic key finding helpers for level keyViresh Kumar1-53/+10
Use the recently added generic key findings helpers to find level key values. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Add generic key finding helpers and use them for freq APIsViresh Kumar1-99/+130
There are three type of helpers, to find exact, ceil, and floor values, replicated for multiple key types, freq, level, bw. And all of these helpers share a lot of boilerplate code. Add generic key finding helpers to reduce code redundancy. Also update the freq finder helpers to use the new infrastructure. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()Viresh Kumar1-54/+0
This was added few years back, but the code that was supposed to use it never got merged. Remove the unused helper. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Remove custom OPP helper supportViresh Kumar1-130/+2
The only user of the custom helper is migrated to use dev_pm_opp_set_config_regulators() interface. Remove the now unused custom OPP helper support. This cleans up _set_opp() and leaves a single code path to be used by all users. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Add dev_pm_opp_get_supplies()Viresh Kumar1-0/+25
We already have an API for getting voltage information for a single regulator, dev_pm_opp_get_voltage(), but there is nothing available for multiple regulator case. This patch adds a new API, dev_pm_opp_get_supplies(), to get all information related to the supplies for an OPP. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Make _generic_set_opp_regulator() a config_regulators() interfaceViresh Kumar1-39/+12
In order to reuse the same code path, i.e. clk_set_rate() from _set_opp(), migrate _generic_set_opp_regulator() to implement a config_regulators() interface. It is renamed to _opp_config_regulator_single() and is set as the preferred config_regulators() interface whenever we have a single regulator available. Note that this also drops code responsible for restoring the voltage/freq in case of errors. We aren't handling that properly currently, restoring only some of the resources while leaving others out (like bandwidth and required OPPs). It is better to drop all of it instead of partial restoration. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Add support for config_regulators() helperViresh Kumar1-1/+67
Extend the dev_pm_opp_set_config() interface to allow adding config_regulators() helpers. This helper will be called to set the voltages of the regulators from the regular path in _set_opp(), while we are trying to change the OPP. This will eventually replace the custom set_opp() helper. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-prop-name helper API to use set-config helpersViresh Kumar1-37/+18
Now that we have a central API to handle all OPP table configurations, migrate the set-prop-name family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Acked-by: Samuel Holland <samuel@sholland.org> # sun50i Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate attach-genpd API to use set-config helpersViresh Kumar1-67/+18
Now that we have a central API to handle all OPP table configurations, migrate the attach-genpd family of helpers to use the new infrastructure. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-opp-helper API to use set-config helpersViresh Kumar1-69/+20
Now that we have a central API to handle all OPP table configurations, migrate the set-opp-helper family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Remove devm_pm_opp_register_set_opp_helper() as it has no users currently. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-clk-name API to use set-config helpersViresh Kumar1-99/+43
Now that we have a central API to handle all OPP table configurations, migrate the set-clk-name family of helpers to use the new infrastructure. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-supported-hw API to use set-config helpersViresh Kumar1-67/+20
Now that we have a central API to handle all OPP table configurations, migrate the set-supported-hw family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-regulators API to use set-config helpersViresh Kumar1-72/+19
Now that we have a central API to handle all OPP table configurations, migrate the set-regulators family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Add dev_pm_opp_set_config() and friendsViresh Kumar1-1/+228
The OPP core already have few configuration specific APIs and it is getting complex or messy for both the OPP core and its users. Lets introduce a new set of API which will be used for all kind of different configurations, and shall eventually be used by all the existing ones. The new API, returns a unique token instead of a pointer to the OPP table, which allows the OPP core to drop the resources selectively later on. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Make dev_pm_opp_set_regulators() accept NULL terminated listViresh Kumar1-6/+12
Make dev_pm_opp_set_regulators() accept a NULL terminated list of names instead of making the callers keep the two parameters in sync, which creates an opportunity for bugs to get in. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Steven Price <steven.price@arm.com> # panfrost Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-09OPP: Track if clock name is configured by platformViresh Kumar1-0/+7
Track if the clock name is configured by the platform or not. This is a preparatory change and will be used by later commits. This also makes the behavior of the clkname API similar to other ones, which allow repeated calls to the same API for each CPU. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-09OPP: Fix typo in commentViresh Kumar1-1/+1
Replace rate with state. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-06opp: Fix some kernel-doc commentsYang Li1-2/+2
Make @freq to @bw in dev_pm_opp_find_bw_ceil() and dev_pm_opp_find_bw_floor() kernel-doc comment to remove warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/opp/core.c:753: warning: Function parameter or member 'bw' not described in 'dev_pm_opp_find_bw_ceil' drivers/opp/core.c:753: warning: Excess function parameter 'freq' description in 'dev_pm_opp_find_bw_ceil' drivers/opp/core.c:812: warning: Function parameter or member 'bw' not described in 'dev_pm_opp_find_bw_floor' drivers/opp/core.c:812: warning: Excess function parameter 'freq' description in 'dev_pm_opp_find_bw_floor' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-06opp: Fix error check in dev_pm_opp_attach_genpd()Tang Bin1-2/+2
dev_pm_domain_attach_by_name() may return NULL in some cases, so IS_ERR() doesn't meet the requirements. Thus fix it. Fixes: 6319aee10e53 ("opp: Attach genpds to devices from within OPP core") Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> [ Viresh: Replace ENODATA with ENODEV ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-05-04opp: Reorder definition of ceil/floor helpersViresh Kumar1-97/+97
Reorder the helpers to keep all freq specific ones, followed by level and bw. No functional change. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-05-04opp: Add apis to retrieve opps with interconnect bandwidthKrzysztof Kozlowski1-0/+120
Add dev_pm_opp_find_bw_ceil and dev_pm_opp_find_bw_floor to retrieve opps based on interconnect associated with the opp and bandwidth. The index variable is the index of the interconnect as specified in the opp table in Devicetree. Co-developed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-11opp: replace usage of found with dedicated list iterator variableJakob Koschel1-6/+5
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-11PM: opp: simplify with dev_err_probe()Krzysztof Kozlowski1-9/+5
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-03-03OPP: Add "opp-microwatt" supporting codeLukasz Luba1-0/+25
Add new property to the OPP: power value. The OPP entry in the DT can have "opp-microwatt". Add the needed code to handle this new property in the existing infrastructure. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-04opp: Change type of dev_pm_opp_attach_genpd(names) argumentDmitry Osipenko1-3/+3
Elements of the 'names' array are not changed by the code, constify them for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-23opp: core: Check for pending links before reading required_opp pointersMarijn Suijten1-4/+4
Commit 4fa82a87ba55 ("opp: Allow required-opps to be used for non genpd use cases") dereferences the pointers in required_opp_tables but these might be set to an ERR_PTR if the list still has lazy links pending, resulting in segfaults. Prior to this patch IS_ERR was also checked on required_opp_tables[i] before reading ->is_genpd inside _opp_table_alloc_required_tables, which is at the same time the predicate to add this table to the lazy list. This segfault is solved by reordering the checks to bail on lazy pending tables before reading ->is_genpd. Fixes: 4fa82a87ba55 ("opp: Allow required-opps to be used for non genpd use cases") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-16opp: Drop empty-table checks from _put functionsDmitry Osipenko1-15/+0
The current_opp is released only when whole OPP table is released, otherwise it's only marked as removed by dev_pm_opp_remove_table(). Functions like dev_pm_opp_put_clkname() and dev_pm_opp_put_supported_hw() are checking whether OPP table is empty and it's not if current_opp is set since it holds the refcount of OPP, this produces a noisy warning from these functions about busy OPP table. Remove the checks to fix it. Cc: stable@vger.kernel.org Fixes: 81c4d8a3c414 ("opp: Keep track of currently programmed OPP") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-06-18opp: Allow required-opps to be used for non genpd use casesHsin-Yi Wang1-0/+10
Don't limit required_opp_table to genpd only. One possible use case is cpufreq based devfreq governor, which can use required-opps property to derive devfreq from cpufreq. Though the OPP core still doesn't support non-genpd required-opps in _set_required_opps(). Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> [ Viresh: Update _set_required_opps() to check for genpd ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-16opp: Change return type of devm_pm_opp_attach_genpd()Dmitry Osipenko1-12/+6
Make devm_pm_opp_attach_genpd() to return error code instead of opp_table pointer in order to have return type consistent with the other resource-managed OPP helpers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-16opp: Change return type of devm_pm_opp_register_set_opp_helper()Dmitry Osipenko1-12/+6
Make devm_pm_opp_register_set_opp_helper() to return error code instead of opp_table pointer in order to have return type consistent with the other resource-managed OPP helpers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15opp: Add devres wrapper for dev_pm_opp_set_supported_hwYangtao Li1-0/+29
Add devres wrapper for dev_pm_opp_set_supported_hw() to simplify drivers code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15opp: Add devres wrapper for dev_pm_opp_set_regulatorsYangtao Li1-0/+30
Add devres wrapper for dev_pm_opp_set_regulators() to simplify drivers code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15opp: Add devres wrapper for dev_pm_opp_set_clknameYangtao Li1-0/+27
Add devres wrapper for dev_pm_opp_set_clkname() to simplify drivers code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-12opp: Don't drop extra references to OPPs accidentallyBeata Michalska1-23/+25
We are required to call dev_pm_opp_put() from outside of the opp_table->lock as debugfs removal needs to happen lock-less to avoid circular dependency issues. commit cf1fac943c63 ("opp: Reduce the size of critical section in _opp_kref_release()") tried to fix that introducing a new routine _opp_get_next() which keeps returning OPPs that can be freed by the callers and this routine shall be called without holding the opp_table->lock. Though the commit overlooked the fact that the OPPs can be referenced by other users as well and this routine will end up dropping references which were taken by other users and hence freeing the OPPs prematurely. In effect, other users of the OPPs will end up having invalid pointers at hand. We didn't see any crash reports earlier as the exact situation never happened, though it is certainly possible. We need a way to mark which OPPs are no longer referenced by the OPP core, so we don't drop extra references to them accidentally. This commit adds another OPP flag, "removed", which is used to track this. And now we should never end up dropping extra references to the OPPs. Cc: v5.11+ <stable@vger.kernel.org> # v5.11+ Fixes: cf1fac943c63 ("opp: Reduce the size of critical section in _opp_kref_release()") Signed-off-by: Beata Michalska <beata.michalska@arm.com> [ Viresh: Almost rewrote entire patch, added new "removed" field, rewrote commit log and added the correct Fixes tag. ] Co-developed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-18opp: Don't skip freq update for different frequencyJonathan Marek1-3/+5
We skip the OPP update if the current and target OPPs are same. This is fine for the devices that don't support frequency but may cause issues for the ones that need to program frequency. An OPP entry doesn't really signify a single operating frequency but rather the highest frequency at which the other properties of the OPP entry apply. And we may reach here with different frequency values, while all of them would point to the same OPP entry in the OPP table. We just need to update the clock frequency in that case, though in order to not add special exit points we reuse the code flow from a normal path. While at it, rearrange the conditionals in the 'if' statement to check 'enabled' flag at the end. Fixes: 81c4d8a3c414 ("opp: Keep track of currently programmed OPP") Signed-off-by: Jonathan Marek <jonathan@marek.ca> [ Viresh: Improved commit log and subject, rename current_freq as current_rate, document it, remove local variable and rearrange code. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-04OPP: Add function to look up required OPP's for a given OPPSaravana Kannan1-0/+55
Add a function that allows looking up required OPPs given a source OPP table, destination OPP table and the source OPP. Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> [ Viresh: Rearranged code, fixed return errors ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Don't ignore clk_get() errors other than -ENOENTViresh Kumar1-7/+11
Not all devices that need to use OPP core need to have clocks, a missing clock is fine in which case -ENOENT shall be returned by clk_get(). Anything else is an error and must be handled properly. Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Update bandwidth requirements based on scaling up/downViresh Kumar1-13/+27
The bandwidth must be scaled at a different point in the code flow based on if we are scaling up or down the frequency, otherwise this may cause undesired effects as the device will try to use more of the memory bandwidth which may be shared across several devices. Much like how regulators and required-opps are programmed. Reported-by: Dmitry Osipenko <digetx@gmail.com> Reported-by: Akhil P Oommen <akhilpo@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-15 03:26:12 +0000