summaryrefslogtreecommitdiffstats
path: root/drivers/of
AgeCommit message (Collapse)AuthorFilesLines
2020-08-06Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds1-11/+16
Pull MIPS upates from Thomas Bogendoerfer: - improvements for Loongson64 - extended ingenic support - removal of not maintained paravirt system type - cleanups and fixes * tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits) MIPS: SGI-IP27: always enable NUMA in Kconfig MAINTAINERS: Update KVM/MIPS maintainers MIPS: Update default config file for Loongson-3 MIPS: KVM: Add kvm guest support for Loongson-3 dt-bindings: mips: Document Loongson kvm guest board MIPS: handle Loongson-specific GSExc exception MIPS: add definitions for Loongson-specific CP0.Diag1 register MIPS: only register FTLBPar exception handler for supported models MIPS: ingenic: Hardcode mem size for qi,lb60 board MIPS: DTS: ingenic/qi,lb60: Add model and memory node MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB MIPS: head.S: Init fw_passed_dtb to builtin DTB of: address: Fix parser address/size cells initialization of_address: Guard of_bus_pci_get_flags with CONFIG_PCI MIPS: DTS: Fix number of msi vectors for Loongson64G MIPS: Loongson64: Add ISA node for LS7A PCH MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH MIPS: Loongson64: Enlarge IO_SPACE_LIMIT MIPS: Loongson64: Process ISA Node in DeviceTree of_address: Add bus type match for pci ranges parser ...
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-1/+3
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-08-05Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+23
Pull drm updates from Dave Airlie: "New xilinx displayport driver, AMD support for two new GPUs (more header files), i915 initial support for RocketLake and some work on their DG1 (discrete chip). The core also grew some lockdep annotations to try and constrain what drivers do with dma-fences, and added some documentation on why the idea of indefinite fences doesn't work. The long list is below. I do have some fixes trees outstanding, but I'll follow up with those later. core: - add user def flag to cmd line modes - dma_fence_wait added might_sleep - dma-fence lockdep annotations - indefinite fences are bad documentation - gem CMA functions used in more drivers - struct mutex removal - more drm_ debug macro usage - set/drop master api fixes - fix for drm/mm hole size comparison - drm/mm remove invalid entry optimization - optimise drm/mm hole handling - VRR debugfs added - uncompressed AFBC modifier support - multiple display id blocks in EDID - multiple driver sg handling fixes - __drm_atomic_helper_crtc_reset in all drivers - managed vram helpers ttm: - ttm_mem_reg handling cleanup - remove bo offset field - drop CMA memtype flag - drop mappable flag xilinx: - New Xilinx ZynqMP DisplayPort Subsystem driver nouveau: - add CRC support - start using NVIDIA published class header files - convert all push buffer emission to new macros - Proper push buffer space management for EVO/NVD channels. - firmware loading fixes - 2MiB system memory pages support on Pascal and newer vkms: - larger cursor support i915: - Rocketlake platform enablement - Early DG1 enablement - Numerous GEM refactorings - DP MST fixes - FBC, PSR, Cursor, Color, Gamma fixes - TGL, RKL, EHL workaround updates - TGL 8K display support fixes - SDVO/HDMI/DVI fixes amdgpu: - Initial support for Sienna Cichlid GPU - Initial support for Navy Flounder GPU - SI UVD/VCE support - expose rotation property - Add support for unique id on Arcturus - Enable runtime PM on vega10 boards that support BACO - Skip BAR resizing if the bios already did id - Major swSMU code cleanup - Fixes for DCN bandwidth calculations amdkfd: - Track SDMA usage per process - SMI events interface radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes msm: - headers regenerated causing churn - a650/a640 display and GPU enablement - dpu dither support for 6bpc panels - dpu cursor fix - dsi/mdp5 enablement for sdm630/sdm636/sdm66 tegra: - video capture prep support - reflection support mediatek: - convert mtk_dsi to bridge API meson: - FBC support sun4i: - iommu support rockchip: - register locking fix - per-pixel alpha support PX30 VOP mgag200: - ported to simple and shmem helpers - device init cleanups - use managed pci functions - dropped hw cursor support ast: - use managed pci functions - use managed VRAM helpers - rework cursor support malidp: - dev_groups support hibmc: - refactor hibmc_drv_vdac: vc4: - create TXP CRTC imx: - error path fixes and cleanups etnaviv: - clock handling and error handling cleanups - use pin_user_pages" * tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits) drm/msm: use kthread_create_worker instead of kthread_run drm/msm/mdp5: Add MDP5 configuration for SDM636/660 drm/msm/dsi: Add DSI configuration for SDM660 drm/msm/mdp5: Add MDP5 configuration for SDM630 drm/msm/dsi: Add phy configuration for SDM630/636/660 drm/msm/a6xx: add A640/A650 hwcg drm/msm/a6xx: hwcg tables in gpulist drm/msm/dpu: add SM8250 to hw catalog drm/msm/dpu: add SM8150 to hw catalog drm/msm/dpu: intf timing path for displayport drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3 drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845 drm/msm/dpu: move some sspp caps to dpu_caps drm/msm/dpu: update UBWC config for sm8150 and sm8250 drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250 drm/msm/a6xx: set ubwc config for A640 and A650 drm/msm/adreno: un-open-code some packets drm/msm: sync generated headers drm/msm/a6xx: add build_bw_table for A640/A650 drm/msm/a6xx: fix crashstate capture for A650 ...
2020-08-05Merge tag 'devicetree-for-5.9' of ↵Linus Torvalds5-20/+97
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - Improve device links cycle detection and breaking. Add more bindings for device link dependencies. - Refactor parsing 'no-map' in __reserved_mem_alloc_size() - Improve DT unittest 'ranges' and 'dma-ranges' test case to check differing cell sizes - Various http to https link conversions - Add a schema check to prevent 'syscon' from being used by itself without a more specific compatible - A bunch more DT binding conversions to schema * tag 'devicetree-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) of: reserved-memory: remove duplicated call to of_get_flat_dt_prop() for no-map node of: unittest: Use bigger address cells to catch parser regressions dt-bindings: memory-controllers: Convert mmdc to json-schema dt-bindings: mtd: Convert imx nand to json-schema dt-bindings: mtd: Convert gpmi nand to json-schema dt-bindings: iio: io-channel-mux: Fix compatible string in example code of: property: Add device link support for pinctrl-0 through pinctrl-8 of: property: Add device link support for multiple DT bindings dt-bindings: phy: ti: phy-gmii-sel: convert bindings to json-schema dt-bindings: mux: mux.h: drop a duplicated word dt-bindings: misc: Convert olpc,xo1.75-ec to json-schema dt-bindings: aspeed-lpc: Replace HTTP links with HTTPS ones dt-bindings: drm/bridge: Replace HTTP links with HTTPS ones drm/tilcdc: Replace HTTP links with HTTPS ones dt-bindings: iommu: renesas,ipmmu-vmsa: Add r8a774e1 support dt-bindings: fpga: Replace HTTP links with HTTPS ones dt-bindings: virtio: Replace HTTP links with HTTPS ones dt-bindings: media: imx274: Add optional input clock and supplies dt-bindings: i2c-gpio: Use 'deprecated' keyword on deprecated properties dt-bindings: interrupt-controller: Fix typos in loongson,liointc.yaml ...
2020-08-03of: reserved-memory: remove duplicated call to of_get_flat_dt_prop() for ↵Yue Hu1-6/+6
no-map node Just use nomap instead of the second call to of_get_flat_dt_prop(). And change nomap as a bool type due to != NULL operator. Also, correct comment about node of 'align' -> 'alignment'. Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20200730092353.15644-1-zbestahu@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-03of: unittest: Use bigger address cells to catch parser regressionsNicolas Saenz Julienne2-6/+6
Getting address and size cells for dma-ranges/ranges parsing is tricky and shouldn't rely on the node's count_cells() method. The function starts looking for cells on the parent node, as its supposed to work with device nodes, which doesn't work when input with bus nodes, as generally done when parsing ranges. Add test to catch regressions on that specific quirk as developers will be tempted to edit it out in favor of the default method. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/9200970a917a9cabdc5b17483b5a8725111eb9d0.camel@suse.de Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-03net: mdiobus: add reset-post-delay-us handlingBruno Thomsen1-0/+2
Load new "reset-post-delay-us" value from MDIO properties, and if configured to a greater then zero delay do a flexible sleeping delay after MDIO bus reset deassert. This allows devices to exit reset state before start bus communication. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31of: address: Fix parser address/size cells initializationNicolas Saenz Julienne1-2/+2
bus->count_cells() parses cells starting from the node's parent. This is not good enough for parser_init() which is generally parsing a bus node. Revert to previous behavior using of_bus_n_*_cells(). Fixes: 2f96593ecc37 ("of_address: Add bus type match for pci ranges parser") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-31of_address: Guard of_bus_pci_get_flags with CONFIG_PCIJiaxun Yang1-1/+1
After 2f96593ecc37 ("of_address: Add bus type match for pci ranges parser"), the last user of of_bus_pci_get_flags when CONFIG_PCI is disabled had gone. This caused unused function warning when compiling without CONFIG_PCI. Fix by guarding it with CONFIG_PCI. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 2f96593ecc37 ("of_address: Add bus type match for pci ranges parser") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-28of_address: Add bus type match for pci ranges parserJiaxun Yang1-12/+17
So the parser can be used to parse range property of ISA bus. As they're all using PCI-like method of range property, there is no need start a new parser. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-28of/irq: Make of_msi_map_rid() PCI bus agnosticLorenzo Pieralisi1-14/+14
There is nothing PCI bus specific in the of_msi_map_rid() implementation other than the requester ID tag for the input ID space. Rename requester ID to a more generic ID so that the translation code can be used by all busses that require input/output ID translations. No functional change intended. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-11-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/irq: make of_msi_map_get_device_domain() bus agnosticDiana Craciun1-3/+5
of_msi_map_get_device_domain() is PCI specific but it need not be and can be easily changed to be bus agnostic in order to be used by other busses by adding an IRQ domain bus token as an input parameter. Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci/msi.c Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-10-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/device: Add input id to of_dma_configure()Lorenzo Pieralisi1-3/+5
Devices sitting on proprietary busses have a device ID space that is owned by the respective bus and related firmware bindings. In order to let the generic OF layer handle the input translations to an IOMMU id, for such busses the current of_dma_configure() interface should be extended in order to allow the bus layer to provide the device input id parameter - that is retrieved/assigned in bus specific code and firmware. Augment of_dma_configure() to add an optional input_id parameter, leaving current functionality unchanged. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200619082013.13661-8-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/iommu: Make of_map_rid() PCI agnosticLorenzo Pieralisi2-22/+22
There is nothing PCI specific (other than the RID - requester ID) in the of_map_rid() implementation, so the same function can be reused for input/output IDs mapping for other busses just as well. Rename the RID instances/names to a generic "id" tag. No functionality change intended. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-7-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-27of: property: Add device link support for pinctrl-0 through pinctrl-8Saravana Kannan1-0/+18
Add support for pinctrl-0 through pinctrl-8 explicitly instead of trying to add support for pinctrl-%d properties. Of all the pinctrl-* properties in dts files (20322), only 47% (9531) are pinctrl-%d properties. Of all the pinctrl-%d properties, 99.5% (9486) are made up of pinctrl-[0-2]. 'pinctrl-8' is the current maximum found in dts files. Trying to parse all pinctrl-* properties and checking for pinctrl-%d is unnecessarily complicated. So, just add support for pinctrl-[0-8] for now. In the unlikely event we ever exceed pinctrl-8, we can come back and improve this. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200724234415.1651639-2-saravanak@google.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-07-27of: property: Add device link support for multiple DT bindingsSaravana Kannan1-0/+9
Add support for creating device links out of the following DT bindings: - interrupts-extended - nvmem-cells - phys - wakeup-parent Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200724234415.1651639-1-saravanak@google.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-07-24Merge v5.8-rc6 into drm-nextDave Airlie1-2/+7
I've got a silent conflict + two trees based on fixes to merge. Fixes a silent merge with amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-07-15of/address: Fix variable name in comment of of_iomapWenchao Hao1-1/+1
The first variable name of of_iomap is np while previous comment write device here. Signed-off-by: Wenchao Hao <haowenchao22@gmail.com> Link: https://lore.kernel.org/r/20200701162444.9494-1-haowenchao22@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-07-01of_graph: add of_graph_is_present()Dmitry Osipenko1-0/+23
In some cases it's very useful to silently check whether port node exists at all in a device-tree before proceeding with parsing the graph. The DRM bridges code is one example of such case where absence of a graph in a device-tree is a legit condition. This patch adds of_graph_is_present() which returns true if given device-tree node contains OF graph port. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200701074232.13632-2-digetx@gmail.com
2020-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+7
Minor overlapping changes in xfrm_device.c, between the double ESP trailing bug fix setting the XFRM_INIT flag and the changes in net-next preparing for bonding encryption support. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20of: mdio: preserve phy dev_flags in of_phy_connect()Tao Ren1-1/+1
Replace assignment "=" with OR "|=" for "phy->dev_flags" so "dev_flags" configured in phy probe() function can be preserved. The idea is similar to commit e7312efbd5de ("net: phy: modify assignment to OR for dev_flags in phy_attach_direct"). Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19of: of_mdio: Correct loop scanning logicFlorian Fainelli1-2/+7
Commit 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") introduced a break of the loop on the premise that a successful registration should exit the loop. The premise is correct but not to code, because rc && rc != -ENODEV is just a special error condition, that means we would exit the loop even with rc == -ENODEV which is absolutely not correct since this is the error code to indicate to the MDIO bus layer that scanning should continue. Fix this by explicitly checking for rc = 0 as the only valid condition to break out of the loop. Fixes: 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-17of: property: Improve cycle detection when one of the devices is never addedSaravana Kannan1-6/+56
Consider this example where -> means LHS device is a consumer of RHS device and indentation represents "child of" of the previous device. Device A -> Device C Device B -> Device A Device C Without this commit: 1. Device A is added. 2. Device A is added to waiting for supplier list (Device C) 3. Device B is added 4. Device B is linked as a consumer to Device A 5. Device A doesn't probe because it's waiting for Device C to be added. 6. Device B doesn't probe because Device A hasn't probed. 7. Device C will never be added because it's parent hasn't probed. So, Device A, B and C will be in a probe/add deadlock. This commit detects this scenario and stops trying to create a device link between Device A and Device C since doing so would create the following cycle: Device A -> Devic C -(parent)-> Device B -> Device A. With this commit: 1. Device A is added. 3. Device B is added 4. Device B is linked as a consumer to Device A 5. Device A probes. 6. Device B probes because Device A has probed. 7. Device C is added and probed. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200610011934.49795-3-saravanak@google.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-15of: reserved_mem: Fix typo in the too-many-regions messageDanny Lin1-1/+1
Minor fix for a missing preposition in the error message that appears when there are too many reserved memory regions for the allocated array to store. Signed-off-by: Danny Lin <danny@kdrag0n.dev> Link: https://lore.kernel.org/r/20200604054900.200317-1-danny@kdrag0n.dev Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-07Merge tag 'driver-core-5.8-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core patches for 5.8-rc1. Not all that huge this release, just a number of small fixes and updates: - software node fixes - kobject now sends KOBJ_REMOVE when it is removed from sysfs, not when it is removed from memory (which could come much later) - device link additions and fixes based on testing on more devices - firmware core cleanups - other minor changes, full details in the shortlog All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits) driver core: Update device link status correctly for SYNC_STATE_ONLY links firmware_loader: change enum fw_opt to u32 software node: implement software_node_unregister() kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs driver core: Remove unnecessary is_fwnode_dev variable in device_add() drivers property: When no children in primary, try secondary driver core: platform: Fix spelling errors in platform.c driver core: Remove check in driver_deferred_probe_force_trigger() of: platform: Batch fwnode parsing when adding all top level devices driver core: fw_devlink: Add support for batching fwnode parsing driver core: Look for waiting consumers only for a fwnode's primary device driver core: Move code to the right part of the file Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default"" drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish firmware_loader: move fw_fallback_config to a private kernel symbol namespace driver core: Add missing '\n' in log messages driver/base/soc: Use kobj_to_dev() API Add documentation on meaning of -EPROBE_DEFER driver core: platform: remove redundant assignment to variable ret debugfs: Use the correct style for SPDX License Identifier ...
2020-06-04Merge tag 'devicetree-for-5.8' of ↵Linus Torvalds6-19/+27
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Convert various DT (non-binding) doc files to ReST - Various improvements to device link code - Fix __of_attach_node_sysfs refcounting bug - Add support for 'memory-region-names' with reserved-memory binding - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics, Shanghai Awinic Technology Co., MikroTik, Silex Insight - A bunch more binding conversions to DT schema. Only 3K to go. - Add a minimum version check for schema tools - Treewide dropping of 'allOf' usage with schema references. Not needed in new json-schema spec. - Some formatting clean-ups of schemas * tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits) dt-bindings: clock: Add documentation for X1830 bindings. dt-bindings: mailbox: Convert imx mu to json-schema dt-bindings: power: Convert imx gpcv2 to json-schema dt-bindings: power: Convert imx gpc to json-schema dt-bindings: Merge gpio-usb-b-connector with usb-connector dt-bindings: timer: renesas: cmt: Convert to json-schema dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema dt-bindings: timer: Convert i.MX GPT to json-schema dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742 dt-bindings: serial: Add binding for UART pin swap dt-bindings: geni-se: Add interconnect binding for GENI QUP dt-bindings: geni-se: Convert QUP geni-se bindings to YAML dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix dt-bindings: input: touchscreen: edt-ft5x06: change reg property dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver dt-bindings: timer: renesas: mtu2: Convert to json-schema of/fdt: Remove redundant kbasename function call dt-bindings: clock: Convert i.MX1 clock to json-schema dt-bindings: clock: Convert i.MX21 clock to json-schema dt-bindings: clock: Convert i.MX25 clock to json-schema ...
2020-06-04Merge tag 'arm-drivers-5.8' of ↵Linus Torvalds1-12/+29
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
2020-05-28of/fdt: Remove redundant kbasename function callQi Zheng1-4/+0
For version 1 to 3 of the device tree, this is the node full path as a zero terminated string, starting with "/". The following equation will not hold, since the node name has been processed in the fdt_get_name(). *pathp == '/' For version 16 and later, this is the node unit name only (or an empty string for the root node). So the above equation will still not hold. So the kbasename() is redundant, just remove it. Signed-off-by: Qi Zheng <arch0.zheng@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-27dt/platform: Fix comment in of_dev_lookup()Qi Zheng1-1/+1
The code is using of_dev_lookup() rather than of_devname_lookup(). Signed-off-by: Qi Zheng <arch0.zheng@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-27of: Fix a refcounting bug in __of_attach_node_sysfs()Dan Carpenter1-2/+1
The problem in this code is that if kobject_add() fails, then it should call of_node_put(np) to drop the reference count. I've actually moved the of_node_get(np) later in the function to avoid needing to do clean up. Fixes: 5b2c2f5a0ea3 ("of: overlay: add missing of_node_get() in __of_attach_node_sysfs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-25Merge tag 'tegra-for-5.8-of' of ↵Arnd Bergmann1-12/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers of: Changes for v5.8-rc1 These changes add support for multiple reserved-memory regions per device. * tag 'tegra-for-5.8-of' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: of: Make <linux/of_reserved_mem.h> self-contained of: reserved-memory: Support multiple regions per device of: reserved-memory: Support lookup of regions by name Link: https://lore.kernel.org/r/20200515145311.1580134-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-19drivers/of: keep description of function consistent with function namechenqiwu2-6/+6
Currently, there are some descriptions of function not consistent with function name, fixing them will make the code more readable. Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-15of: platform: Batch fwnode parsing when adding all top level devicesSaravana Kannan1-0/+2
The fw_devlink_pause() and fw_devlink_resume() APIs allow batching the parsing of the device tree nodes when a lot of devices are added. This will significantly cut down parsing time (as much a 1 second on some systems). So, use them when adding devices for all the top level device tree nodes in a system. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200515053500.215929-5-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-30of: reserved-memory: Support multiple regions per deviceThierry Reding1-12/+10
While the lookup/initialization code already supports multiple memory regions per device, the release code will only ever release the first matching memory region. Enhance the code to release all matching regions. Each attachment of a region to a device is uniquely identifiable using a struct device pointer and a pointer to the memory region's struct reserved_mem. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-04-30of: reserved-memory: Support lookup of regions by nameThierry Reding1-0/+19
Add support for looking up memory regions by name. This looks up the given name in the newly introduced memory-region-names property and returns the memory region at the corresponding index in the memory- region(s) property. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-04-28of: property: Do not link to disabled devicesNicolas Saenz Julienne1-1/+13
When creating a consumer/supplier relationship between two devices, make sure the supplier node is actually active. Otherwise this will create a link relationship that will never be fulfilled. This, in the worst case scenario, will hang the system during boot. Note that, in practice, the fact that a device-tree represented consumer/supplier relationship isn't fulfilled will not prevent devices from successfully probing. Fixes: a3e1d1a7f5fc ("of: property: Add functional dependency link from DT bindings") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-28of: property: Fix create device links for all child-supplier dependenciesNicolas Saenz Julienne1-1/+1
Upon adding a new device from a DT node, we scan its properties and its children's properties in order to create a consumer/supplier relationship between the device and the property provider. That said, it's possible for some of the node's children to be disabled, which will create links that'll never be fulfilled. To get around this, use the for_each_available_child_of_node() function instead of for_each_available_node() when iterating over the node's children. Fixes: d4387cd11741 ("of: property: Create device links for all child-supplier depencencies") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-28of: property: Don't retry device_link_add() upon failureSaravana Kannan1-1/+1
When of_link_to_phandle() was implemented initially, there was no way to tell if device_link_add() was failing because the supplier device hasn't been parsed yet, hasn't been added yet, the links were creating a cycle, etc. Some of these were transient errors that'd go away at a later point. However, with the current set of improved checks, if device_link_add() fails, it'll only be for permanent errors like cycles or out-of-memory errors. Also, with the addition of DL_FLAG_SYNC_STATE_ONLY flag [1] to device links, all the valid dependency cycles due to "proxy" device links (needed for correctness of sync_state() device callback) will never fail device_link_add() due to cycles. So, continuing to retry failing device links (by returning -EAGAIN) is no longer useful. At worst, it prevents platforms from setting fw_devlink=on (or better) because it prevents proper boot up. So, let's not do that anymore. [1] - https://lore.kernel.org/lkml/20191028220027.251605-1-saravanak@google.com/ Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-13/+40
Simple overlapping changes to linux/vermagic.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22net: mdio: of: export part of of_mdiobus_register_phy()Oleksij Rempel1-31/+42
This function will be needed in tja11xx driver for secondary PHY support. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20of: fix the warnings from command line.tangjianqiang1-1/+1
Gerrit will complain with this warnings: ERROR: (foo*) should be (foo *) Signed-off-by: tangjianqiang <tangjianqiang@xiaomi.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-17Merge branch 'dt/linus' into dt/nextRob Herring3-13/+40
2020-04-17of: unittest: kmemleak in duplicate property updateFrank Rowand2-10/+25
kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 5 of 5. When overlay 'overlay_bad_add_dup_prop' is applied, the apply code properly detects that a memory leak will occur if the overlay is removed since the duplicate property is located in a base devicetree node and reports via printk(): OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail The overlay is removed when the apply code detects multiple changesets modifying the same property. This is reported via printk(): OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail As a result of this error, the overlay is removed resulting in the expected memory leak. Add another device node level to the overlay so that the duplicate property is located in a node added by the overlay, thus no memory leak will occur when the overlay is removed. Thus users of kmemleak will not have to debug this leak in the future. Fixes: 2fe0e8769df9 ("of: overlay: check prevents multiple fragments touching same property") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-17of: overlay: kmemleak in dup_and_fixup_symbol_prop()Frank Rowand1-0/+2
kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 4 of 5. target_path was not freed in the non-error path. Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-17of: unittest: kmemleak in of_unittest_overlay_high_level()Frank Rowand1-1/+4
kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 3 of 5. of_unittest_overlay_high_level() failed to kfree the newly created property when the property named 'name' is skipped. Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-17of: unittest: kmemleak in of_unittest_platform_populate()Frank Rowand1-2/+5
kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 2 of 5. of_unittest_platform_populate() left an elevated reference count for grandchild nodes (which are platform devices). Fix the platform device reference counts so that the memory will be freed. Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-17of: unittest: kmemleak on changeset destroyFrank Rowand1-0/+4
kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 1 of 5. of_unittest_changeset() reaches deeply into the dynamic devicetree functions. Several nodes were left with an elevated reference count and thus were not properly cleaned up. Fix the reference counts so that the memory will be freed. Fixes: 201c910bd689 ("of: Transactional DT support.") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-14of: property: Add device link support for extconSaravana Kannan1-0/+2
Add support for creating device links out of more DT properties. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-14of: of_detach_node() remove unneeded local return variableDing Xiang1-2/+1
rc is unneeded, just return 0. Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-02Merge tag 'devicetree-for-5.7' of ↵Linus Torvalds13-168/+905
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 12:52:50 +0000