summaryrefslogtreecommitdiffstats
path: root/drivers/of
AgeCommit message (Collapse)AuthorFilesLines
2018-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-4/+13
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
2018-08-14Merge tag 'devicetree-for-4.19' of ↵Linus Torvalds2-10/+5
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - Remove an obsolete hack for PPC32 longtrail systems - Make of_io_request_and_map() "name" arg optional - Add vendor prefixes for bitmain, Asus, and Y Soft - Remove 'interrupt-parent' from bindings as it is implicit - New properties for wm8994 audio codec - Add 'clocks' property support to SRAM binding - Add binding for ASPEED coprocessor interrupt controller - Various binding spelling and link fixes * tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: Documentation: remove dynamic-resolution-notes reference to non-existent file dt-bindings: Add Y Soft Corporation vendor prefix of/fdt: Remove PPC32 longtrail hack in memory scan dt-bindings: remove 'interrupt-parent' from bindings pinctrl: tegra: fix spelling in devicetree binding document usb: dwc3: rockchip: Fix PHY documentation links. dt-bindings: sound: wm8994: document wlf,csnaddr-pd property dt-bindings: sound: wm8994: document wlf,spkmode-pu property dt-bindings: sram: Add 'clocks' as an optional property dt-bindings: Add vendor prefix for AsusTek Computer Inc. dt-bindings: misc: ASPEED coprocessor interrupt controller dt-bindings: gpio: pca953x: Document interrupts, update example drivers/of: Make of_io_request_and_map() "name" argument optional dt-bindings: Add bitmain vendor prefix Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports"
2018-08-07of/fdt: Remove PPC32 longtrail hack in memory scanMichael Ellerman1-8/+1
When the OF code was originally made common by Grant in commit 51975db0b733 ("of/flattree: merge early_init_dt_scan_memory() common code") (Feb 2010), the common code inherited a hack to handle PPC "longtrail" machines, which had a "memory@0" node with no device_type. That check was then made to only apply to PPC32 in b44aa25d20e2 ("of: Handle memory@0 node on PPC32 only") (May 2014). But according to Paul Mackerras the "longtrail" machines are long dead, if they were ever seen in the wild at all. If someone does still have one, we can handle this firmware wart in powerpc platform code. So remove the hack once and for all. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-27OF: Don't set default coherent DMA maskRobin Murphy1-10/+10
Now that we can track upstream DMA constraints properly with bus_dma_mask instead of trying (and failing) to maintain it in coherent_dma_mask, it doesn't make much sense for the firmware code to be touching the latter at all. It's merely papering over bugs wherein a driver has failed to call dma_set_coherent_mask() *and* the bus code has not initialised any default value. We don't really want to encourage more drivers coercing dma_mask so we'll continue to fix that up if necessary, but add a warning to help flush out any such buggy bus code that remains. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-27of/device: Set bus DMA mask as appropriateRobin Murphy1-0/+1
When an explicit DMA limit is described by firmware, we need to remember it regardless of how drivers might subsequently update their devices' masks. The new bus_dma_mask field does that. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-27of/platform: Initialise default DMA masksRobin Murphy1-0/+3
When of_dma_configure() was first born in 591c1ee465ce ("of: configure the platform device dma parameters"), everything DMA-related was factored out of of_platform_device_create_pdata() as seemed appropriate at the time. However, now that of_dma_configure() has grown into the generic handler for processing DMA-related properties from DT for all kinds of devices, it is no longer an appropriate place to be doing OF-platform-specific business. Since there are still plenty of platform drivers not setting their own masks and depending on the bus default, let's reinstate that inialisation in the OF-platform code itself, and restore the long-standing status quo from 0589342c2794 ("of: set dma_mask to point to coherent_dma_mask") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller3-3/+16
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16of: overlay: update phandle cache on overlay apply and removeFrank Rowand3-3/+16
A comment in the review of the patch adding the phandle cache said that the cache would have to be updated when modules are applied and removed. This patch implements the cache updates. Fixes: 0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()") Reported-by: Alan Tull <atull@kernel.org> Suggested-by: Alan Tull <atull@kernel.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-13of: mdio: Support fixed links in of_phy_get_and_connect()Linus Walleij1-4/+13
By a simple extension of of_phy_get_and_connect() drivers that have a fixed link on e.g. RGMII can support also fixed links, so in addition to: ethernet-port { phy-mode = "rgmii"; phy-handle = <&foo>; }; This setup with a fixed-link node and no phy-handle will now also work just fine: ethernet-port { phy-mode = "rgmii"; fixed-link { speed = <1000>; full-duplex; pause; }; }; This is very helpful for connecting random ethernet ports to e.g. DSA switches that typically reside on fixed links. The phy-mode is still there as the fixes link in this case is still an RGMII link. Tested on the Cortina Gemini driver with the Vitesse DSA router chip on a fixed 1Gbit link. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-10drivers/of: Make of_io_request_and_map() "name" argument optionalBenjamin Herrenschmidt1-2/+4
These days of_address_to_resource() puts a reasonable name in the resource struct, thus make the "name" argument an optional override. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook2-2/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11Merge tag 'armsoc-late' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "This is a branch with a few merge requests that either came in late, or took a while longer for us to review and merge than usual and thus cut it a bit close to the merge window. We stage them in a separate branch and if things look good, we still send them up -- and that's the case here. This is mostly DT additions for Renesas platforms, adding IP block descriptions for existing and new SoCs. There are also some driver updates for Qualcomm platforms for SMEM/QMI and GENI, which is their generalized serial protocol interface" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits) soc: qcom: smem: introduce qcom_smem_virt_to_phys() soc: qcom: qmi: fix a buffer sizing bug MAINTAINERS: Update pattern for qcom_scm soc: Unconditionally include qcom Makefile soc: qcom: smem: check sooner in qcom_smem_set_global_partition() soc: qcom: smem: fix qcom_smem_set_global_partition() soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private() soc: qcom: smem: byte swap values properly soc: qcom: smem: return proper type for cached entry functions soc: qcom: smem: fix first cache entry calculation soc: qcom: cmd-db: Make endian-agnostic drivers: qcom: add command DB driver arm64: dts: renesas: salvator-common: Add ADV7482 support ARM: dts: r8a7740: Add CEU1 ARM: dts: r8a7740: Add CEU0 arm64: dts: renesas: salvator-common: enable VIN arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7795-es1: add CSI-2 node ...
2018-06-07Merge tag 'devicetree-for-4.18' of ↵Linus Torvalds4-7/+23
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - Sync dtc with upstream version v1.4.6-21-g84e414b0b5bc. This adds new warnings which are either fixed or disabled by default (enabled with W=1). - Validate an untrusted offset in DT overlay function update_usages_of_a_phandle_reference - Fix a use after free error of_platform_device_destroy - Fix an off by 1 string errors in unittest - Avoid creating a struct device for OPP nodes - Update DT specific submitting-patches.txt with patch content and subject requirements. - Move some bindings to their proper subsystem locations - Add vendor prefixes for Kaohsiung, SiFive, Avnet, Wi2Wi, Logic PD, and ArcherMind - Add documentation for "no-gpio-delays" property in FSI bus GPIO master - Add compatible for r8a77990 SoC ravb ethernet block - More wack-a-mole removal of 'status' property in examples * tag 'devicetree-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits) dt-bindings: submitting-patches: add guidance on patch content and subject of: platform: stop accessing invalid dev in of_platform_device_destroy dt-bindings: net: ravb: Add support for r8a77990 SoC dt-bindings: Add vendor prefix for ArcherMind dt-bindings: fsi-master-gpio: Document "no-gpio-delays" property dt-bindings: Add vendor prefix for Logic PD of: overlay: validate offset from property fixups of: unittest: for strings, account for trailing \0 in property length field drm: rcar-du: disable dtc graph-endpoint warnings on DT overlays kbuild: disable new dtc graph and unit-address warnings scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc MAINTAINERS: add keyword for devicetree overlay notifiers dt-bindings: define vendor prefix for Wi2Wi, Inc. dt-bindings: Add vendor prefix for Avnet, Inc. dt-bindings: Relocate Tegra20 memory controller bindings dt-bindings: Add "sifive" vendor prefix dt-bindings: exynos: move ADC binding to iio/adc/ directory dt-bindings: powerpc/4xx: move 4xx NDFC and EMAC bindings to subsystem directories dt-bindings: move various RNG bindings to rng/ directory dt-bindings: move various timer bindings to timer/ directory ...
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+3
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-3/+5
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-06-04of: platform: stop accessing invalid dev in of_platform_device_destroySrinivas Kandagatla1-2/+3
Immediately after the platform_device_unregister() the device will be cleaned up. Accessing the freed pointer immediately after that will crash the system. Found this bug when kernel is built with CONFIG_PAGE_POISONING and testing loading/unloading audio drivers in a loop on Qcom platforms. Fix this by moving of_node_clear_flag() just before the unregister calls. Below is the crash trace: Unable to handle kernel paging request at virtual address 6b6b6b6b6b6c03 Mem abort info: ESR = 0x96000021 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000021 CM = 0, WnR = 0 [006b6b6b6b6b6c03] address between user and kernel address ranges Internal error: Oops: 96000021 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1784 Comm: sh Tainted: G W 4.17.0-rc7-02230-ge3a63a7ef641-dirty #204 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_bit+0x18/0x2c lr : of_platform_device_destroy+0x64/0xb8 sp : ffff00000c9c3930 x29: ffff00000c9c3930 x28: ffff80003d39b200 x27: ffff000008bb1000 x26: 0000000000000040 x25: 0000000000000124 x24: ffff80003a9a3080 x23: 0000000000000060 x22: ffff00000939f518 x21: ffff80003aa79e98 x20: ffff80003aa3dae0 x19: ffff80003aa3c890 x18: ffff800009feb794 x17: 0000000000000000 x16: 0000000000000000 x15: ffff800009feb790 x14: 0000000000000000 x13: ffff80003a058778 x12: ffff80003a058728 x11: ffff80003a058750 x10: 0000000000000000 x9 : 0000000000000006 x8 : ffff80003a825988 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000008 x2 : 0000000000000001 x1 : 6b6b6b6b6b6b6c03 x0 : 0000000000000000 Process sh (pid: 1784, stack limit = 0x (ptrval)) Call trace: clear_bit+0x18/0x2c q6afe_remove+0x20/0x38 apr_device_remove+0x30/0x70 device_release_driver_internal+0x170/0x208 device_release_driver+0x14/0x20 bus_remove_device+0xcc/0x150 device_del+0x10c/0x310 device_unregister+0x1c/0x70 apr_remove_device+0xc/0x18 device_for_each_child+0x50/0x80 apr_remove+0x18/0x20 rpmsg_dev_remove+0x38/0x68 device_release_driver_internal+0x170/0x208 device_release_driver+0x14/0x20 bus_remove_device+0xcc/0x150 device_del+0x10c/0x310 device_unregister+0x1c/0x70 qcom_smd_remove_device+0xc/0x18 device_for_each_child+0x50/0x80 qcom_smd_unregister_edge+0x3c/0x70 smd_subdev_remove+0x18/0x28 rproc_stop+0x48/0xd8 rproc_shutdown+0x60/0xe8 state_store+0xbc/0xf8 dev_attr_store+0x18/0x28 sysfs_kf_write+0x3c/0x50 kernfs_fop_write+0x118/0x1e0 __vfs_write+0x18/0x110 vfs_write+0xa4/0x1a8 ksys_write+0x48/0xb0 sys_write+0xc/0x18 el0_svc_naked+0x30/0x34 Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22) ---[ end trace 32020935775616a2 ]--- Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-05-26Merge tag 'qcom-drivers-for-4.18' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/late Qualcomm ARM Based Driver Updates for v4.18 * Various SMEM updates/fixes * Add qcom_smem_virt_to_phys SMEM API * Update MAINTAINERS to include qcom_scm pattern * Add Qualcomm Command DB driver * Add Qualcomm SCM compatible for IPQ4019 * Add MSM8998 to smd-rpm compatible list * Add Qualcomm GENI based QUP wrapper * Fix Qualcomm QMI buffer sizing bug * tag 'qcom-drivers-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: soc: qcom: smem: introduce qcom_smem_virt_to_phys() soc: qcom: qmi: fix a buffer sizing bug MAINTAINERS: Update pattern for qcom_scm soc: Unconditionally include qcom Makefile soc: qcom: smem: check sooner in qcom_smem_set_global_partition() soc: qcom: smem: fix qcom_smem_set_global_partition() soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private() soc: qcom: smem: byte swap values properly soc: qcom: smem: return proper type for cached entry functions soc: qcom: smem: fix first cache entry calculation soc: qcom: cmd-db: Make endian-agnostic drivers: qcom: add command DB driver soc: qcom: Add GENI based QUP Wrapper driver soc: qcom: smd-rpm: Add msm8998 compatible firmware: qcom: scm: Add ipq4019 soc compatible Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-25drivers: qcom: add command DB driverMahesh Sivasubramanian1-0/+1
Command DB is a simple database in the shared memory of QCOM SoCs, that provides information regarding shared resources. Some shared resources in the SoC have properties that are probed dynamically at boot by the remote processor. The information pertaining to the SoC and the platform are made available in the shared memory. Drivers can query this information using predefined strings. Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-23of: overlay: validate offset from property fixupsFrank Rowand1-0/+5
The smatch static checker marks the data in offset as untrusted, leading it to warn: drivers/of/resolver.c:125 update_usages_of_a_phandle_reference() error: buffer underflow 'prop->value' 's32min-s32max' Add check to verify that offset is within the property data. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Cc: <stable@vger.kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-05-22of: unittest: for strings, account for trailing \0 in property length fieldStefan M Schaeckeler1-4/+4
For strings, account for trailing \0 in property length field: This is consistent with how dtc builds string properties. Function __of_prop_dup() would misbehave on such properties as it duplicates properties based on the property length field creating new string values without trailing \0s. Signed-off-by: Stefan M Schaeckeler <sschaeck@cisco.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Tested-by: Frank Rowand <frank.rowand@sony.com> Cc: <stable@vger.kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-05-16of: mdio: Fall back to mdiobus_register() with NULL device_nodeFlorian Fainelli1-0/+3
When the device_node specified is NULL, fall back to mdiobus_register(). We have a number of drivers having a similar pattern which is: if (np) of_mdiobus_register() else mdiobus_register() so incorporate that behavior within the core of_mdiobus_register() function. This is also consistent with the stub version that we defined when CONFIG_OF=n. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14Merge tag 'devicetree-fixes-for-4.17' into dt/next to pick-up fixesRob Herring1-9/+21
2018-05-07Merge tag 'devicetree-fixes-for-4.17' of ↵Linus Torvalds1-9/+21
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - fix path to display timing binding - fix some typos in interrupt-names and clock-names - fix a resource leak on overlay removal - add missing documentation for R8A77965 DMA, serial, and net - cleanup sunxi pinctrl description - add Kieback & Peter GmbH vendor prefix * tag 'devicetree-fixes-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: panel: lvds: Fix path to display timing bindings dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/ dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/ of: overlay: Stop leaking resources on overlay removal dtc: checks: drop warning for missing PCI bridge bus-range dt-bindings: dmaengine: rcar-dmac: document R8A77965 support dt-bindings: serial: sh-sci: Add support for r8a77965 (H)SCIF dt-bindings: net: ravb: Add support for r8a77965 SoC dt-bindings: pinctrl: sunxi: Fix reference to driver doc: Add vendor prefix for Kieback & Peter GmbH
2018-05-03drivers: remove force dma flag from busesChristoph Hellwig2-3/+5
With each bus implementing its own DMA configuration callback, there is no need for bus to explicitly set the force_dma flag. Modify the of_dma_configure function to accept an input parameter which specifies if implicit DMA configuration is required when it is not described by the firmware. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Reviewed-by: Rob Herring <robh@kernel.org> [hch: tweaked the changelog a bit] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-26of: overlay: Stop leaking resources on overlay removalJan Kiszka1-9/+21
Only the overlay notifier callbacks have a chance to potentially get hold of references to those two resources, but they are not supposed to store them beyond OF_OVERLAY_POST_REMOVE. Document the overlay notifier API, its constraint regarding pointer lifetime, and then remove intentional leaks of ovcs->overlay_tree and ovcs->fdt from free_overlay_changeset. See also https://lkml.org/lkml/2018/4/23/1063 and following. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-04-24of: Don't create device for OPP tablesViresh Kumar1-0/+11
The OPP tables are present as separate nodes, whose phandle is used in the "operating-points-v2" property of devices. Currently the OF core creates a device for the OPP table unconditionally, which is not used by any kernel code. This patch creates another OF device_id table for the nodes which must be skipped while creating devices and OPP is the only user of it for now. Reported-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-04-23earlycon: Use a pointer table to fix __earlycon_table strideDaniel Kurtz1-2/+5
Commit 99492c39f39f ("earlycon: Fix __earlycon_table stride") tried to fix __earlycon_table stride by forcing the earlycon_id struct alignment to 32 and asking the linker to 32-byte align the __earlycon_table symbol. This fix was based on commit 07fca0e57fca92 ("tracing: Properly align linker defined symbols") which tried a similar fix for the tracing subsystem. However, this fix doesn't quite work because there is no guarantee that gcc will place structures packed into an array format. In fact, gcc 4.9 chooses to 64-byte align these structs by inserting additional padding between the entries because it has no clue that they are supposed to be in an array. If we are unlucky, the linker will assign symbol "__earlycon_table" to a 32-byte aligned address which does not correspond to the 64-byte aligned contents of section "__earlycon_table". To address this same problem, the fix to the tracing system was subsequently re-implemented using a more robust table of pointers approach by commits: 3d56e331b653 ("tracing: Replace syscall_meta_data struct array with pointer array") 654986462939 ("tracepoints: Fix section alignment using pointer array") e4a9ea5ee7c8 ("tracing: Replace trace_event struct array with pointer array") Let's use this same "array of pointers to structs" approach for EARLYCON_TABLE. Fixes: 99492c39f39f ("earlycon: Fix __earlycon_table stride") Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Suggested-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-18of/numa: drop export of of_node_to_nidRob Herring1-1/+0
The "generic" implementation of of_node_to_nid is only used by arm64 and only in built-in code, so remove its export. Any device with a struct device should be able to use dev_to_node() instead. Also, exporting of_node_to_nid doesn't actually work if we build a module on an arch that doesn't select OF_NUMA nor provide its own of_node_to_nid implementation. Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-04-15Merge tag 'kbuild-v4.17-2' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - pass HOSTLDFLAGS when compiling single .c host programs - build genksyms lexer and parser files instead of using shipped versions - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency - let the top .gitignore globally ignore artifacts generated by flex, bison, and asn1_compiler - let the top Makefile globally clean artifacts generated by flex, bison, and asn1_compiler - use safer .SECONDARY marker instead of .PRECIOUS to prevent intermediate files from being removed - support -fmacro-prefix-map option to make __FILE__ a relative path - fix # escaping to prepare for the future GNU Make release - clean up deb-pkg by using debian tools instead of handrolled source/changes generation - improve rpm-pkg portability by supporting kernel-install as a fallback of new-kernel-pkg - extend Kconfig listnewconfig target to provide more information * tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: extend output of 'listnewconfig' kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg Kbuild: fix # escaping in .cmd files for future Make kbuild: deb-pkg: split generating packaging and build kbuild: use -fmacro-prefix-map to make __FILE__ a relative path kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers kbuild: rename *-asn1.[ch] to *.asn1.[ch] kbuild: clean up *-asn1.[ch] patterns from top-level Makefile .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore kbuild: add %.dtb.S and %.dtb to 'targets' automatically kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically genksyms: generate lexer and parser during build instead of shipping kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore kbuild: use HOSTLDFLAGS for single .c executables
2018-04-11proc: add seq_put_decimal_ull_width to speed up /proc/pid/smapsAndrei Vagin1-1/+1
seq_put_decimal_ull_w(m, str, val, width) prints a decimal number with a specified minimal field width. It is equivalent of seq_printf(m, "%s%*d", str, width, val), but it works much faster. == test_smaps.py num = 0 with open("/proc/1/smaps") as f: for x in xrange(10000): data = f.read() f.seek(0, 0) == == Before patch == $ time python test_smaps.py real 0m4.593s user 0m0.398s sys 0m4.158s == After patch == $ time python test_smaps.py real 0m3.828s user 0m0.413s sys 0m3.408s $ perf -g record python test_smaps.py == Before patch == - 79.01% 3.36% python [kernel.kallsyms] [k] show_smap.isra.33 - 75.65% show_smap.isra.33 + 48.85% seq_printf + 15.75% __walk_page_range + 9.70% show_map_vma.isra.23 0.61% seq_puts == After patch == - 75.51% 4.62% python [kernel.kallsyms] [k] show_smap.isra.33 - 70.88% show_smap.isra.33 + 24.82% seq_put_decimal_ull_w + 19.78% __walk_page_range + 12.74% seq_printf + 11.08% show_map_vma.isra.23 + 1.68% seq_puts [akpm@linux-foundation.org: fix drivers/of/unittest.c build] Link: http://lkml.kernel.org/r/20180212074931.7227-1-avagin@openvz.org Signed-off-by: Andrei Vagin <avagin@openvz.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-07kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markersMasahiro Yamada1-4/+0
GNU Make automatically deletes intermediate files that are updated in a chain of pattern rules. Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts Example 2) %.o <- %.c <- %.c_shipped A couple of makefiles mark such targets as .PRECIOUS to prevent Make from deleting them, but the correct way is to use .SECONDARY. .SECONDARY Prerequisites of this special target are treated as intermediate files but are never automatically deleted. .PRECIOUS When make is interrupted during execution, it may delete the target file it is updating if the file was modified since make started. If you mark the file as precious, make will never delete the file if interrupted. Both can avoid deletion of intermediate files, but the difference is the behavior when Make is interrupted; .SECONDARY deletes the target, but .PRECIOUS does not. The use of .PRECIOUS is relatively rare since we do not want to keep partially constructed (possibly corrupted) targets. Another difference is that .PRECIOUS works with pattern rules whereas .SECONDARY does not. .PRECIOUS: $(obj)/%.lex.c works, but .SECONDARY: $(obj)/%.lex.c has no effect. However, for the reason above, I do not want to use .PRECIOUS which could cause obscure build breakage. The targets specified as .SECONDARY must be explicit. $(targets) contains all targets that need to include .*.cmd files. So, the intermediates you want to keep are mostly in there. Therefore, mark $(targets) as .SECONDARY. It means primary targets are also marked as .SECONDARY, but I do not see any drawback for this. I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This will make Kbuild search for non-existing .*.cmd files, but this is not a noticeable performance issue. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-04-07kbuild: add %.dtb.S and %.dtb to 'targets' automaticallyMasahiro Yamada1-2/+0
Another common pattern that consists of chained commands is to compile a DTB as binary data into the kernel image or a module. It is used in several places in the source tree. Support it in the core Makefile. $(call if_changed,dt_S_dtb) is more suitable than $(call cmd,dt_S_dtb) in case cmd_dt_S_dtb is changed in the future. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com>
2018-04-06Merge tag 'pci-v4.17-changes' of ↵Linus Torvalds1-17/+79
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...
2018-04-05Merge tag 'devicetree-for-4.17' of ↵Linus Torvalds7-124/+525
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - Sync dtc to upstream version v1.4.6-9-gaadd0b65c987. This adds a bunch more warnings (hidden behind W=1). - Build dtc lexer and parser files instead of using shipped versions. - Rework overlay apply API to take an FDT as input and apply overlays in a single step. - Add a phandle lookup cache. This improves boot time by hundreds of msec on systems with large DT. - Add trivial mcp4017/18/19 potentiometers bindings. - Remove VLA stack usage in DT code. * tag 'devicetree-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (26 commits) of: unittest: fix an error code in of_unittest_apply_overlay() of: unittest: move misplaced function declaration of: unittest: Remove VLA stack usage of: overlay: Fix forgotten reference to of_overlay_apply() of: Documentation: Fix forgotten reference to of_overlay_apply() of: unittest: local return value variable related cleanups of: unittest: remove unneeded local return value variables dt-bindings: trivial: add various mcp4017/18/19 potentiometers of: unittest: fix an error test in of_unittest_overlay_8() of: cache phandle nodes to reduce cost of of_find_node_by_phandle() dt-bindings: rockchip-dw-mshc: use consistent clock names MAINTAINERS: Add linux/of_*.h headers to appropriate subsystems scripts: turn off some new dtc warnings by default scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987 scripts/dtc: generate lexer and parser during build instead of shipping powerpc: boot: add strrchr function of: overlay: do not include path in full_name of added nodes of: unittest: clean up changeset test arm64/efi: Make strrchr() available to the EFI namespace ARM: boot: add strrchr function ...
2018-04-04of: Add missing I/O range exception for indirect-IO devicesZhichang Yuan1-16/+76
There are some special ISA/LPC devices that work on a specific I/O range where it is not correct to specify a 'ranges' property in the DTS parent node as CPU addresses translated from DTS node are only for memory space on some architectures, such as ARM64. Without the parent 'ranges' property, of_translate_address() returns an error. Here we add special handling for this case. During the OF address translation, some checking will be performed to identify whether the device node is registered as indirect-IO. If it is, the I/O translation will be done in a different way from that one of PCI MMIO. In this way, the I/O 'reg' property of the special ISA/LPC devices will be parsed correctly. Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> # earlier draft Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Rob Herring <robh@kernel.org>
2018-04-04PCI: Add fwnode handler as input param of pci_register_io_range()Gabriele Paoloni1-1/+3
In preparation for having the PCI MMIO helpers use the new generic I/O space management (logical PIO) we need to add the fwnode handler as an extra input parameter. Changes the signature of pci_register_io_range() and its callers as needed. Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Rob Herring <robh@kernel.org>
2018-04-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+40
Pull networking updates from David Miller: 1) Support offloading wireless authentication to userspace via NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari. 2) A lot of work on network namespace setup/teardown from Kirill Tkhai. Setup and cleanup of namespaces now all run asynchronously and thus performance is significantly increased. 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon Streiff. 4) Support zerocopy on RDS sockets, from Sowmini Varadhan. 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel Borkmann. 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime Chevallier. 7) Support grafting of child qdiscs in mlxsw driver, from Nogah Frankel. 8) Add packet forwarding tests to selftests, from Ido Schimmel. 9) Deal with sub-optimal GSO packets better in BBR congestion control, from Eric Dumazet. 10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern. 11) Add path MTU tests to selftests, from Stefano Brivio. 12) Various bits of IPSEC offloading support for mlx5, from Aviad Yehezkel, Yossi Kuperman, and Saeed Mahameed. 13) Support RSS spreading on ntuple filters in SFC driver, from Edward Cree. 14) Lots of sockmap work from John Fastabend. Applications can use eBPF to filter sendmsg and sendpage operations. 15) In-kernel receive TLS support, from Dave Watson. 16) Add XDP support to ixgbevf, this is significant because it should allow optimized XDP usage in various cloud environments. From Tony Nguyen. 17) Add new Intel E800 series "ice" ethernet driver, from Anirudh Venkataramanan et al. 18) IP fragmentation match offload support in nfp driver, from Pieter Jansen van Vuuren. 19) Support XDP redirect in i40e driver, from Björn Töpel. 20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of tracepoints in their raw form, from Alexei Starovoitov. 21) Lots of striding RQ improvements to mlx5 driver with many performance improvements, from Tariq Toukan. 22) Use rhashtable for inet frag reassembly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits) net: mvneta: improve suspend/resume net: mvneta: split rxq/txq init and txq deinit into SW and HW parts ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh net: bgmac: Fix endian access in bgmac_dma_tx_ring_free() net: bgmac: Correctly annotate register space route: check sysctl_fib_multipath_use_neigh earlier than hash fix typo in command value in drivers/net/phy/mdio-bitbang. sky2: Increase D3 delay to sky2 stops working after suspend net/mlx5e: Set EQE based as default TX interrupt moderation mode ibmvnic: Disable irqs before exiting reset from closed state net: sched: do not emit messages while holding spinlock vlan: also check phy_driver ts_info for vlan's real device Bluetooth: Mark expected switch fall-throughs Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME Bluetooth: btrsi: remove unused including <linux/version.h> Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4 sh_eth: kill useless check in __sh_eth_get_regs() sh_eth: add sh_eth_cpu_data::no_xdfar flag ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data() ipv4: factorize sk_wmem_alloc updates done by __ip_append_data() ...
2018-03-30of_net: Implement of_get_nvmem_mac_address helperMike Looijmans1-0/+40
It's common practice to store MAC addresses for network interfaces into nvmem devices. However the code to actually do this in the kernel lacks, so this patch adds of_get_nvmem_mac_address() for drivers to obtain the address from an nvmem cell provider. This is particulary useful on devices where the ethernet interface cannot be configured by the bootloader, for example because it's in an FPGA. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28Backmerge tag 'v4.16-rc7' into drm-nextDave Airlie1-2/+2
Linux 4.16-rc7 This was requested by Daniel, and things were getting a bit hard to reconcile, most of the conflicts were trivial though.
2018-03-19of: unittest: fix an error code in of_unittest_apply_overlay()Dan Carpenter1-4/+2
We accidentally return zero on failure instead of a negative error code. Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-17of: unittest: move misplaced function declarationArnd Bergmann1-2/+1
The overlay_data_apply() declaration is outside of the #ifdef that contains both the user and the definition, causing a compile-time warning in some configurations: drivers/of/unittest.c:48:19: error: 'overlay_data_apply' declared 'static' but never defined [-Werror=unused-function] static int __init overlay_data_apply(const char *overlay_name, int *overlay_id); This moves the declaration into the #ifdef section. Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-17of: unittest: Remove VLA stack usageTobin C. Harding1-4/+11
The kernel would like to have all stack VLA usage removed[1]. This is a test function so the execution speed is not critical. We can allocate memory for this buffer instead of using a VLA. If kmalloc() fails just return. Allocate buffer with kmalloc(). [1]: https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-17of: overlay: Fix forgotten reference to of_overlay_apply()Geert Uytterhoeven1-1/+1
While technically the ovcs_id is still returned by of_overlay_apply(), this is an internal function. All public callers of of_overlay_remove() pass an ovcs_id returned by the public function of_overlay_fdt_apply(). Fixes: 39a751a4cb7e4798 ("of: change overlay apply input data from unflattened to FDT") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-12of: unittest: local return value variable related cleanupsFrank Rowand1-16/+6
Several more style issues became apparent while creating "of: unittest: remove unneeded local return value variables". Correct those issues. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-12of: unittest: remove unneeded local return value variablesFrank Rowand1-65/+24
A common pattern in many unittest functions is to save the return value of a function in a local variable, then test the value of the local variable, without using that return value for any further purpose. Remove the local return value variable for these cases. A second common pattern is: ret = some_test_function(many, parameters, ...); if (unittest(ret == 0, "error message format", ...)) return; This pattern is more clear when the local variable 'ret' is used, due to the long lines caused by the parameters to the test function and the long format and data parameters of unittest(). The local variable is retained in these cases. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-08Merge branch 'dtc-update' into dt/nextRob Herring1-2/+2
2018-03-07of: unittest: fix an error test in of_unittest_overlay_8()Dan Carpenter1-2/+1
We changed this from of_overlay_apply() to overlay_data_apply(). The overlay_data_apply() function returns 1 on success and 0 on error so the check for less than zero needs to be updated. Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-07of: cache phandle nodes to reduce cost of of_find_node_by_phandle()Frank Rowand3-7/+85
Create a cache of the nodes that contain a phandle property. Use this cache to find the node for a given phandle value instead of scanning the devicetree to find the node. If the phandle value is not found in the cache, of_find_node_by_phandle() will fall back to the tree scan algorithm. The cache is initialized in of_core_init(). The cache is freed via a late_initcall_sync() if modules are not enabled. If the devicetree is created by the dtc compiler, with all phandle property values auto generated, then the size required by the cache could be 4 * (1 + number of phandles) bytes. This results in an O(1) node lookup cost for a given phandle value. Due to a concern that the phandle property values might not be consistent with what is generated by the dtc compiler, a mask has been added to the cache lookup algorithm. To maintain the O(1) node lookup cost, the size of the cache has been increased by rounding the number of entries up to the next power of two. The overhead of finding the devicetree node containing a given phandle value has been noted by several people in the recent past, in some cases with a patch to add a hashed index of devicetree nodes, based on the phandle value of the node. One concern with this approach is the extra space added to each node. This patch takes advantage of the phandle property values auto generated by the dtc compiler, which begin with one and monotonically increase by one, resulting in a range of 1..n for n phandle values. This implementation should also provide a good reduction of overhead for any range of phandle values that are mostly in a monotonic range. Performance measurements by Chintan Pandya <cpandya@codeaurora.org> of several implementations of patches that are similar to this one suggest an expected reduction of boot time by ~400ms for his test system. If the cache size was decreased to 64 entries, the boot time was reduced by ~340 ms. The measurements were on a 4.9.73 kernel for arch/arm64/boot/dts/qcom/sda670-mtp.dts, contains 2371 nodes and 814 phandle values. Reported-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-05of: overlay: do not include path in full_name of added nodesFrank Rowand4-18/+30
Struct device_node full_name no longer includes the full path name when the devicetree is created from a flattened device tree (FDT). The overlay node creation code was not modified to reflect this change. Fix the node full_name generated by overlay code to contain only the basename. Unittests call an overlay internal function to create new nodes. Fix up these calls to provide basename only instead of the full path. Fixes: a7e4cfb0a7ca ("of/fdt: only store the device node basename in full_name") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>