summaryrefslogtreecommitdiffstats
path: root/drivers/of
AgeCommit message (Collapse)AuthorFilesLines
2017-12-13of_mdio / mdiobus: ensure mdio devices have fwnode correctly populatedRussell King1-0/+3
Ensure that all mdio devices populate the struct device fwnode pointer as well as the of_node pointer to allow drivers that wish to use fwnode APIs to work. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08of: overlay: Make node skipping in init_overlay_changeset() clearerGeert Uytterhoeven1-10/+11
Make it more clear that nodes without "__overlay__" subnodes are skipped, by reverting the logic and using continue. This also reduces indentation level. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-08of: overlay: Fix out-of-bounds write in init_overlay_changeset()Geert Uytterhoeven1-3/+4
If an overlay has no "__symbols__" node, but it has nodes without "__overlay__" subnodes at the end (e.g. a "__fixups__" node), after filling in all fragments for nodes with "__overlay__" subnodes, "fragment = &fragments[cnt]" will point beyond the end of the allocated array. Hence writing to "fragment->overlay" will overwrite unallocated memory, which may lead to a crash later. Fix this by deferring both the assignment to "fragment" and the offending write afterwards until we know for sure the node has an "__overlay__" subnode, and thus a valid entry in "fragments[]". Fixes: 61b4de4e0b384f4a ("of: overlay: minor restructuring") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-06of: overlay: Fix (un)locking in of_overlay_apply()Geert Uytterhoeven1-10/+5
The special overlay mutex is taken first, hence it should be released last in the error path. of_resolve_phandles() must be called with of_mutex held. Without it, a node and new phandle could be added via of_attach_node(), making the max phandle wrong. free_overlay_changeset() must be called with of_mutex held, if any non-trivial cleanup is to be done. Hence move "mutex_lock(&of_mutex)" up, as suggested by Frank, and merge the two tail statements of the success and error paths, now they became identical. Note that while the two mutexes are adjacent, we still need both: __of_changeset_apply_notify(), which is called by __of_changeset_apply() unlocks of_mutex, then does notifications then locks of_mutex. So the mutex get released in the middle of of_overlay_apply() Fixes: f948d6d8b792bb90 ("of: overlay: avoid race condition between applying multiple overlays") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-06of: overlay: Fix memory leak in of_overlay_apply() error pathGeert Uytterhoeven1-8/+8
If of_resolve_phandles() fails, free_overlay_changeset() is called in the error path. However, that function returns early if the list hasn't been initialized yet, before freeing the object. Explicitly calling kfree() instead would solve that issue. However, that complicates matter, by having to consider which of two different methods to use to dispose of the same object. Hence make free_overlay_changeset() consider initialization state of the different parts of the object, making it always safe to call (once!) to dispose of a (partially) initialized overlay_changeset: - Only destroy the changeset if the list was initialized, - Make init_overlay_changeset() store the ID in ovcs->id on success, to avoid calling idr_remove() with an error value or an already released ID. Reported-by: Colin King <colin.king@canonical.com> Fixes: f948d6d8b792bb90 ("of: overlay: avoid race condition between applying multiple overlays") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-06of: overlay: Remove else after gotoGeert Uytterhoeven1-15/+12
If an "if" branch is terminated by a "goto", there's no need to have an "else" statement and an indented block of code. Remove the "else" statement to simplify the code flow for the casual reviewer. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-06of: Spelling s/changset/changeset/Geert Uytterhoeven2-6/+6
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-06of: unittest: Remove bogus overlay mutex release from overlay_data_add()Geert Uytterhoeven1-1/+0
overlay_data_add() never takes the special overlay mutex, so it must not be released in the error patch. Presumably the call to of_overlay_mutex_unlock() is a relic from v1 of the patch. Fixes: f948d6d8b792bb90 ("of: overlay: avoid race condition between applying multiple overlays") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-20Merge tag 'devicetree-fixes-for-4.15' of ↵Linus Torvalds4-67/+7
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - Remove mc13892 as a trivial device - Improve of_find_node_by_name() documentation - Fix unit test dtc warnings - Clean-ups of USB binding documentation - Fix potential NULL deref in of_pci_map_rid * tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: trivial-devices: Remove fsl,mc13892 of: Document exactly what of_find_node_by_name() puts of: unittest: disable interrupts_property warning of: unittest: let dtc generate __local_fixups__ dt-bindings: usb: document hub and host-controller properties dt-bindings: usb: clean up compatible property dt-bindings: usb: fix reg-property port-number range dt-bindings: usb: fix example hub node name of/pci: Fix theoretical NULL dereference
2017-11-20of: Document exactly what of_find_node_by_name() putsStephen Boyd1-3/+3
It isn't clear if this function of_node_put()s the 'from' argument, or the node it searches. Clearly indicate which variable is touched. Fold in some more fixes from Randy too because we're in the area. Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds2-8/+37
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
2017-11-16of: unittest: disable interrupts_property warningRob Herring1-0/+1
The testcases.dts has purposely bad data which now generates a dtc warning: drivers/of/unittest-data/testcases.dtb: Warning (interrupts_property): interrupts size is (4), expected multiple of 8 in /testcase-data/testcase-device2 Disable this warning for now. The proper solution is to split the unit tests into good and bad data. Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-16of: unittest: let dtc generate __local_fixups__Rob Herring1-63/+2
Remove the manually added __local_fixups__ because dtc can now generate them. This also fixes a new warning in the process: drivers/of/unittest-data/testcases.dtb: Warning (interrupts_extended_property): Could not get phandle node for /__local_fixups__/testcase-data/interrupts/interrupts-extended0:interrupts-extended(cell 3) Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-16of/pci: Fix theoretical NULL dereferenceRobin Murphy1-1/+1
In the (relatively mechanical) process of adapting the RID-mapping code to put the resulting ID in an output argument rather than the funtion return value, we ended up with the debug print using the argument pointer rather than the local value, which potentially defeats the earlier NULL check. Fixes: 987068fcbdb7: "of/irq: Break out msi-map lookup (again)" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds1-3/+16
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds11-679/+1106
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-14Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-7/+1
Pull dma-mapping updates from Christoph Hellwig: - turn dma_cache_sync into a dma_map_ops instance and remove implementation that purely are dead because the architecture doesn't support noncoherent allocations - add a flag for busses that need DMA configuration (Robin Murphy) * tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: turn dma_cache_sync into a dma_map_ops method sh: make dma_cache_sync a no-op xtensa: make dma_cache_sync a no-op unicore32: make dma_cache_sync a no-op powerpc: make dma_cache_sync a no-op mn10300: make dma_cache_sync a no-op microblaze: make dma_cache_sync a no-op ia64: make dma_cache_sync a no-op frv: make dma_cache_sync a no-op x86: make dma_cache_sync a no-op floppy: consolidate the dummy fd_cacheflush definition drivers: flag buses which demand DMA configuration
2017-11-09Merge branch 'dt/kbuild' into dt/nextRob Herring1-2/+0
2017-11-09device property: Make fwnode_handle_get() return the fwnodeSakari Ailus1-2/+2
The fwnode_handle_get() function is used to obtain a reference to an fwnode. A common usage pattern for the OF equivalent of the function is: mynode = of_node_get(node); Similarly make fwnode_handle_get() return the fwnode to which the reference was obtained. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-08.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignoreMasahiro Yamada1-2/+0
Most of DT files are compiled under arch/*/boot/dts/, but we have some other directories, like drivers/of/unittest-data/. We often miss to add gitignore patterns per directory. Since there are no source files that end with .dtb or .dtb.S, we can ignore the patterns globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman12-0/+12
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23of: dynamic: fix memory leak related to properties of __of_node_dupLixin Wang1-12/+14
If a node with no properties is dynamically added, then a property is dynamically added to the node, then the property is dynamically removed, the result will be node->properties == NULL and node->deadprops != NULL. Add a separate function to release the properties in both lists. Signed-off-by: Lixin Wang <alan.1.wang@nokia-sbell.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-22soc: qcom: Remote filesystem memory driverBjorn Andersson1-0/+1
The Qualcomm remote file system protocol is used by certain remoteprocs, in particular the modem, to read and write persistent storage in platforms where only the application CPU has physical storage access. The protocol is based on a set of QMI-encoded control-messages and a shared memory buffer for exchaning the data. This driver implements the latter, providing the user space service access to the carved out chunk of memory. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-22of: reserved_mem: Accessor for acquiring reserved_memBjorn Andersson1-0/+26
In some cases drivers referencing a reserved-memory region might want to remap the entire region, but when defining the reserved-memory by "size" the client driver has no means to know the associated base address of the reserved memory region. This patch adds an accessor for such drivers to acquire a handle to their associated reserved-memory for this purpose. A complicating factor for the implementation is that the reserved_mem objects are created from the flattened DeviceTree, as such we can't use the device_node address for comparison. Fortunately the name of the node will be used as "name" of the reserved_mem and will be used when building the full_name, so we can compare the "name" with the basename of the full_name to find the match. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-22of/platform: Generalize /reserved-memory handlingBjorn Andersson1-8/+10
By iterating over all /reserved-memory child nodes and match each one to a list of compatibles that we want to treat specially, we can easily extend the list of compatibles to handle - without having to resort to of_platform_populate() that would create unnecessary platform_devices. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-12/+27
Pull networking fixes from David Miller: "A little more than usual this time around. Been travelling, so that is part of it. Anyways, here are the highlights: 1) Deal with memcontrol races wrt. listener dismantle, from Eric Dumazet. 2) Handle page allocation failures properly in nfp driver, from Jaku Kicinski. 3) Fix memory leaks in macsec, from Sabrina Dubroca. 4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault. 5) Several fixes in bnxt_en driver, including preventing potential NVRAM parameter corruption from Michael Chan. 6) Fix for KRACK attacks in wireless, from Johannes Berg. 7) rtnetlink event generation fixes from Xin Long. 8) Deadlock in mlxsw driver, from Ido Schimmel. 9) Disallow arithmetic operations on context pointers in bpf, from Jakub Kicinski. 10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from Xin Long. 11) Only TCP is supported for sockmap, make that explicit with a check, from John Fastabend. 12) Fix IP options state races in DCCP and TCP, from Eric Dumazet. 13) Fix panic in packet_getsockopt(), also from Eric Dumazet. 14) Add missing locked in hv_sock layer, from Dexuan Cui. 15) Various aquantia bug fixes, including several statistics handling cures. From Igor Russkikh et al. 16) Fix arithmetic overflow in devmap code, from John Fastabend. 17) Fix busted socket memory accounting when we get a fault in the tcp zero copy paths. From Willem de Bruijn. 18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) stmmac: Don't access tx_q->dirty_tx before netif_tx_lock ipv6: flowlabel: do not leave opt->tot_len with garbage of_mdio: Fix broken PHY IRQ in case of probe deferral textsearch: fix typos in library helpers rxrpc: Don't release call mutex on error pointer net: stmmac: Prevent infinite loop in get_rx_timestamp_status() net: stmmac: Fix stmmac_get_rx_hwtstamp() net: stmmac: Add missing call to dev_kfree_skb() mlxsw: spectrum_router: Configure TIGCR on init mlxsw: reg: Add Tunneling IPinIP General Configuration Register net: ethtool: remove error check for legacy setting transceiver type soreuseport: fix initialization race net: bridge: fix returning of vlan range op errors sock: correct sk_wmem_queued accounting on efault in tcp zerocopy bpf: add test cases to bpf selftests to cover all access tests bpf: fix pattern matches for direct packet access bpf: fix off by one for range markings with L{T, E} patterns bpf: devmap fix arithmetic overflow in bitmap_size calculation net: aquantia: Bad udp rate on default interrupt coalescing net: aquantia: Enable coalescing management via ethtool interface ...
2017-10-22of_mdio: Fix broken PHY IRQ in case of probe deferralGeert Uytterhoeven1-12/+27
If an Ethernet PHY is initialized before the interrupt controller it is connected to, a message like the following is printed: irq: no irq domain found for /interrupt-controller@e61c0000 ! However, the actual error is ignored, leading to a non-functional (POLL) PHY interrupt later: Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=POLL) Depending on whether the PHY driver will fall back to polling, Ethernet may or may not work. To fix this: 1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to of_irq_get(). Unlike the former, the latter returns -EPROBE_DEFER if the interrupt controller is not yet available, so this condition can be detected. Other errors are handled the same as before, i.e. use the passed mdio->irq[addr] as interrupt. 2. Propagate and handle errors from of_mdiobus_register_phy() and of_mdiobus_register_device(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19of: overlay: make pr_err() string uniqueFrank Rowand1-1/+1
The same error string occurs in drivers/of/resolver.c. Change the error here to more precisely describe this case, and avoid the possible confusion of looking in the wrong source location to understand the cause of an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-19of: overlay: pr_err from return NOTIFY_OK to overlay apply/removeFrank Rowand1-1/+1
A device tree overlay notifier can return NOTIFY_OK, NOTIFY_STOP, or an embedded errno. overlay_notify() incorrectly reports an error for NOTIFY_OK. Reported-by: atull@kernel.org Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-19drivers: flag buses which demand DMA configurationRobin Murphy1-7/+1
We do not want the common dma_configure() pathway to apply indiscriminately to all devices, since there are plenty of buses which do not have DMA capability, and if their child devices were used for DMA API calls it would only be indicative of a driver bug. However, there are a number of buses for which DMA is implicitly expected even when not described by firmware - those we whitelist with an automatic opt-in to dma_configure(), assuming that the DMA address space and the physical address space are equivalent if not otherwise specified. Commit 723288836628 ("of: restrict DMA configuration") introduced a short-term fix by comparing explicit bus types, but this approach is far from pretty, doesn't scale well, and fails to cope at all with bus drivers which may be built as modules, like host1x. Let's refine things by making that opt-in a property of the bus type, which neatly addresses those problems and lets the decision of whether firmware description of DMA capability should be optional or mandatory stay internal to the bus drivers themselves. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-10-17of: overlay: remove unneeded check for NULL kbasename()Frank Rowand1-2/+0
kbasename() will not return NULL if passed a valid string. If the parameter passed to kbasename() in this case is already NULL then the devicetree has been corrupted. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay: remove a dependency on device node full_nameFrank Rowand3-35/+59
The "%pOF" printf format was recently added to print the full name of a device tree node, with the intent of changing the node full_name field to contain only the node name instead of the full path of the node. dup_and_fixup_symbol_prop() duplicates a property from the "/__symbols__" node of an overlay device tree. The value of each duplicated property must be fixed up to include the full path of a node in the live device tree. The current code uses the node's full_name for that purpose. Update the code to use the "%pOF" printf format to determine the node's full path. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay: simplify applying symbols from an overlayFrank Rowand1-26/+65
The code to apply symbols from an overlay to the live device tree was implemented with the intent to be minimally intrusive on the existing code. After recent restructuring of the overlay apply code, it is easier to disintangle the code that applies the symbols, and to make the overlay changeset creation code more straight forward and understandable. Remove the extra complexity, and make the code more obvious. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay: avoid race condition between applying multiple overlaysFrank Rowand4-6/+67
The process of applying an overlay consists of: - unflatten an overlay FDT (flattened device tree) into an EDT (expanded device tree) - fixup the phandle values in the overlay EDT to fit in a range above the phandle values in the live device tree - create the overlay changeset to reflect the contents of the overlay EDT - apply the overlay changeset, to modify the live device tree, potentially changing the maximum phandle value in the live device tree There is currently no protection against two overlay applies concurrently determining what range of phandle values are in use in the live device tree, and subsequently changing that range. Add a mutex to prevent multiple overlay applies from occurring simultaneously. Move of_resolve_phandles() into of_overlay_apply() so that it does not have to be duplicated by each caller of of_overlay_apply(). The test in of_resolve_phandles() that the overlay tree is detached is temporarily disabled so that old style overlay unittests do not fail. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay: loosen overly strict phandle clash checkFrank Rowand1-4/+4
When an overlay contains a node that already exists in the live device tree, the overlay node is not allowed to change the phandle of the existing node. The existing check refused to allow an overlay node to set the node phandle even when the existing node did not have a phandle. Relax the check to allow an overlay node to set the phandle value if the existing node does not have a phandle. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay: expand check of whether overlay changeset can be removedFrank Rowand1-7/+13
The test of whether it is safe to remove an overlay changeset looked at whether any node in the overlay changeset was in a subtree rooted at any more recently applied overlay changeset node. The test failed to determine whether any node in the overlay changeset was the root of a subtree that contained a more recently applied overlay changeset node. Add this additional check to the test. The test is still lacking any check for any phandle dependencies. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay: detect cases where device tree may become corruptFrank Rowand4-89/+364
When an attempt to apply an overlay changeset fails, an effort is made to revert any partial application of the changeset. When an attempt to remove an overlay changeset fails, an effort is made to re-apply any partial reversion of the changeset. The existing code does not check for failure to recover a failed overlay changeset application or overlay changeset revert. Add the missing checks and flag the devicetree as corrupt if the state of the devicetree can not be determined. Improve and expand the returned errors to more fully reflect the result of the effort to undo the partial effects of a failed attempt to apply or remove an overlay changeset. If the device tree might be corrupt, do not allow further attempts to apply or remove an overlay changeset. When creating an overlay changeset from an overlay device tree, add some additional warnings if the state of the overlay device tree is not as expected. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay: minor restructuringFrank Rowand1-113/+92
Continue improving the readability of overlay.c. The previous patches renamed identifiers. This patch is split out from the previous patches to make the previous patches easier to review. Changes are: - minor code restructuring - some initialization of an overlay changeset occurred outside of init_overlay_changeset(), move that into init_overlay_changeset() - consolidate freeing an overlay changeset into free_overlay_changeset() This patch is intended to not introduce any functional change. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay: rename identifiers in dup_and_fixup_symbol_prop()Frank Rowand1-6/+18
More renaming of identifiers to better reflect what they do. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay: rename identifiers to more reflect what they doFrank Rowand3-257/+295
This patch is aimed primarily at drivers/of/overlay.c, but those changes also have a small impact in a few other files. overlay.c is difficult to read and maintain. Improve readability: - Rename functions, types and variables to better reflect what they do and to be consistent with names in other places, such as the device tree overlay FDT (flattened device tree), and make the algorithms more clear - Use the same names consistently throughout the file - Update comments for name changes - Fix incorrect comments This patch is intended to not introduce any functional change. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay.c: Convert comparisons to zero or NULL to logical expressionsFrank Rowand1-18/+18
Use normal shorthand for comparing a variable to zero. For variable "XXX": convert (XXX == 0) to (!XXX) convert (XXX != 0) to (XXX) Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay.c: Remove comments that state the obvious, to reduce clutterFrank Rowand1-29/+18
Follows recommendations in Documentation/process/coding-style.rst, section 8, Commenting. Some in function comments are promoted to function header comments. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-17of: overlay: fix memory leak related to duplicated propertyLixin Wang1-4/+11
Function of_changeset_add_property or of_changeset_update_property may fails. In this case the property just allocated is never deallocated. Signed-off-by: Lixin Wang <alan.1.wang@nokia-sbell.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-16of: unittest: Remove redundant OF_DETACHED flag settingStephen Boyd1-2/+0
of_fdt_unflatten_tree() already sets the flag on the node to OF_DETACHED, because of_fdt_unflatten_tree() calls __unflatten_device_tree() with the detached bool set to true. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-16of/fdt: Document detached argument to __unflatten_device_tree()Stephen Boyd1-0/+1
This wasn't documented. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-16of/resolver: Replace kmalloc + memcpy with kmemdup()Stephen Boyd1-2/+1
Save one line. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-16of/resolver: Simplify to be32_add_cpu()Stephen Boyd1-4/+1
This is the same as be32_add_cpu(), so simplify the code and remove the now unused local variable. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-16of/fdt: skip unflattening of disabled nodesRob Herring1-0/+4
For static DT usecases, we don't need the disabled nodes and can skip unflattening. This saves a significant amount of RAM in memory constrained cases. In one example on STM32F469, the RAM usage goes from 118K to 26K. There are a few cases in the kernel that modify the status property dynamically. These all are changes from enabled to disabled, depend on OF_DYNAMIC or are not FDT based (PDT based). Tested-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-16of/fdt: add of_fdt_device_is_available functionRob Herring1-3/+14
Add an equivalent function to of_device_is_available for flattened DT, and convert the one existing open coded occurrence. Tested-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-16of: make kobject and bin_attribute support configurableRob Herring6-152/+192
Having device_nodes be kobjects is only needed if sysfs or OF_DYNAMIC is enabled. Otherwise, having a kobject in struct device_node is unnecessary bloat in minimal kernel configurations. Likewise, bin_attribute is only needed in struct property when sysfs is enabled, so we can make it configurable too. Tested-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <robh@kernel.org>