summaryrefslogtreecommitdiffstats
path: root/drivers/of
AgeCommit message (Collapse)AuthorFilesLines
2014-04-15of: Clean up of_update_propertyGuenter Roeck1-7/+3
After searching for the old property, bail out with -ENODEV if it was not found. It is unnecessary to check if oldprop is NULL before removing its binary file; the check was already done before. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rob Herring <robh@kernel.org>
2014-04-14of: Fix the section mismatch warnings.Xiubo Li1-1/+1
In tag next-20140407, building with CONFIG_DEBUG_SECTION_MISMATCH enabled, the following WARNING is occured: WARNING: drivers/built-in.o(.text.unlikely+0x2220): Section mismatch in reference from the function __reserved_mem_check_root() to the function .init.text:of_get_flat_dt_prop() The function __reserved_mem_check_root() references the function __init of_get_flat_dt_prop(). This is often because __reserved_mem_check_root lacks a __init annotation or the annotation of of_get_flat_dt_prop is wrong. WARNING: vmlinux.o(.text.unlikely+0xb9d0): Section mismatch in reference from the function __reserved_mem_check_root() to the (unknown reference) .init.data:(unknown) The function __reserved_mem_check_root() references the (unknown reference) __initdata (unknown). This is often because __reserved_mem_check_root lacks a __initdata annotation or the annotation of (unknown) is wrong. This is cause by : 'drivers: of: add initialization code for dynamic reserved memory'. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Rob Herring <robh@kernel.org>
2014-04-07Merge tag 'for-linus-20140405' of git://git.infradead.org/linux-mtdLinus Torvalds1-0/+34
Pull MTD updates from Brian Norris: - A few SPI NOR ID definitions - Kill the NAND "max pagesize" restriction - Fix some x16 bus-width NAND support - Add NAND JEDEC parameter page support - DT bindings for NAND ECC - GPMI NAND updates (subpage reads) - More OMAP NAND refactoring - New STMicro SPI NOR driver (now in 40 patches!) - A few other random bugfixes * tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd: (120 commits) Fix index regression in nand_read_subpage mtd: diskonchip: mem resource name is not optional mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH mtd: nand: fix GET/SET_FEATURES address on 16-bit devices mtd: omap2: Use devm_ioremap_resource() mtd: denali_dt: Use devm_ioremap_resource() mtd: devices: elm: update DRIVER_NAME as "omap-elm" mtd: devices: elm: configure parallel channels based on ecc_steps mtd: devices: elm: clean elm_load_syndrome mtd: devices: elm: check for hardware engine's design constraints mtd: st_spi_fsm: Succinctly reorganise .remove() mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M" mtd: st_spi_fsm: Avoid duplicating MTD core code mtd: st_spi_fsm: Remove useless consts from function arguments mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back ...
2014-04-04Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-40/+41
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "The main set of series of patches for media subsystem, including: - document RC sysfs class - added an API to setup scancode to allow waking up systems using the Remote Controller - add API for SDR devices. Drivers are still on staging - some API improvements for getting EDID data from media inputs/outputs - new DVB frontend driver for drx-j (ATSC) - one driver (it913x/it9137) got removed, in favor of an improvement on another driver (af9035) - added a skeleton V4L2 PCI driver at documentation - added a dual flash driver (lm3646) - added a new IR driver (img-ir) - added an IR scancode decoder for the Sharp protocol - some improvements at the usbtv driver, to allow its core to be reused. - added a new SDR driver (rtl2832u_sdr) - added a new tuner driver (msi001) - several improvements at em28xx driver to fix PM support, device removal and to split the V4L2 specific bits into a separate sub-driver - one driver got converted to videobuf2 (s2255drv) - the e4000 tuner driver now follows an improved binding model - some fixes at V4L2 compat32 code - several fixes and enhancements at videobuf2 code - some cleanups at V4L2 API documentation - usual driver enhancements, new board additions and misc fixups" [ NOTE! This merge effective drops commit 4329b93b283c ("of: Reduce indentation in of_graph_get_next_endpoint"). The of_graph_get_next_endpoint() function was moved and renamed by commit fd9fdb78a9bf ("[media] of: move graph helpers from drivers/media/v4l2-core to drivers/of"). It was originally called v4l2_of_get_next_endpoint() and lived in the file drivers/media/v4l2-core/v4l2-of.c. In that original location, it was then fixed to support empty port nodes by commit b9db140c1e46 ("[media] v4l: of: Support empty port nodes"), and that commit clashes badly with the dropped "Reduce intendation" commit. I had to choose one or the other, and decided that the "Support empty port nodes" commit was more important ] * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits) [media] em28xx-dvb: fix PCTV 461e tuner I2C binding Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding" [media] em28xx: fix PCTV 290e LNA oops [media] em28xx-dvb: fix PCTV 461e tuner I2C binding [media] m88ds3103: fix bug on .set_tone() [media] saa7134: fix WARN_ON during resume [media] v4l2-dv-timings: add module name, description, license [media] videodev2.h: add parenthesis around macro arguments [media] saa6752hs: depends on CRC32 [media] si4713: fix Kconfig dependencies [media] Sensoray 2255 uses videobuf2 [media] adv7180: free an interrupt on failure paths in init_device() [media] e4000: make VIDEO_V4L2 dependency optional [media] af9033: Don't export functions for the hardware filter [media] af9035: use af9033 PID filters [media] af9033: implement PID filter [media] rtl2832_sdr: do not use dynamic stack allocation [media] e4000: fix 32-bit build error [media] em28xx-audio: make sure audio is unmuted on open() [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format ...
2014-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-25/+24
Pull networking updates from David Miller: "Here is my initial pull request for the networking subsystem during this merge window: 1) Support for ESN in AH (RFC 4302) from Fan Du. 2) Add full kernel doc for ethtool command structures, from Ben Hutchings. 3) Add BCM7xxx PHY driver, from Florian Fainelli. 4) Export computed TCP rate information in netlink socket dumps, from Eric Dumazet. 5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas Dichtel. 6) Convert many drivers to pci_enable_msix_range(), from Alexander Gordeev. 7) Record SKB timestamps more efficiently, from Eric Dumazet. 8) Switch to microsecond resolution for TCP round trip times, also from Eric Dumazet. 9) Clean up and fix 6lowpan fragmentation handling by making use of the existing inet_frag api for it's implementation. 10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss. 11) Auto size SKB lengths when composing netlink messages based upon past message sizes used, from Eric Dumazet. 12) qdisc dumps can take a long time, add a cond_resched(), From Eric Dumazet. 13) Sanitize netpoll core and drivers wrt. SKB handling semantics. Get rid of never-used-in-tree netpoll RX handling. From Eric W Biederman. 14) Support inter-address-family and namespace changing in VTI tunnel driver(s). From Steffen Klassert. 15) Add Altera TSE driver, from Vince Bridgers. 16) Optimizing csum_replace2() so that it doesn't adjust the checksum by checksumming the entire header, from Eric Dumazet. 17) Expand BPF internal implementation for faster interpreting, more direct translations into JIT'd code, and much cleaner uses of BPF filtering in non-socket ocntexts. From Daniel Borkmann and Alexei Starovoitov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits) netpoll: Use skb_irq_freeable to make zap_completion_queue safe. net: Add a test to see if a skb is freeable in irq context qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port' net: ptp: move PTP classifier in its own file net: sxgbe: make "core_ops" static net: sxgbe: fix logical vs bitwise operation net: sxgbe: sxgbe_mdio_register() frees the bus Call efx_set_channels() before efx->type->dimension_resources() xen-netback: disable rogue vif in kthread context net/mlx4: Set proper build dependancy with vxlan be2net: fix build dependency on VxLAN mac802154: make csma/cca parameters per-wpan mac802154: allow only one WPAN to be up at any given time net: filter: minor: fix kdoc in __sk_run_filter netlink: don't compare the nul-termination in nla_strcmp can: c_can: Avoid led toggling for every packet. can: c_can: Simplify TX interrupt cleanup can: c_can: Store dlc private can: c_can: Reduce register access can: c_can: Make the code readable ...
2014-04-02Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds10-87/+655
Pull devicetree changes from Grant Likely: "Updates to devicetree core code. This branch contains the following notable changes: - add reserved memory binding - make struct device_node a kobject and remove legacy /proc/device-tree - ePAPR conformance fixes - update in-kernel DTC copy to version v1.4.0 - preparatory changes for dynamic device tree overlays - minor bug fixes and documentation changes The most significant change in this branch is the conversion of struct device_node to be a kobject that is exposed via sysfs and removal of the old /proc/device-tree code. This simplifies the device tree handling code and tightens up the lifecycle on device tree nodes. [updated: added fix for dangling select PROC_DEVICETREE]" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits) dt: Remove dangling "select PROC_DEVICETREE" of: Add support for ePAPR "stdout-path" property of: device_node kobject lifecycle fixes of: only scan for reserved mem when fdt present powerpc: add support for reserved memory defined by device tree arm64: add support for reserved memory defined by device tree of: add missing major vendors of: add vendor prefix for SMSC of: remove /proc/device-tree of/selftest: Add self tests for manipulation of properties of: Make device nodes kobjects so they show up in sysfs arm: add support for reserved memory defined by device tree drivers: of: add support for custom reserved memory drivers drivers: of: add initialization code for dynamic reserved memory drivers: of: add initialization code for static reserved memory of: document bindings for reserved-memory nodes Revert "of: fix of_update_property()" kbuild: dtbs_install: new make target ARM: mvebu: Allows to get the SoC ID even without PCI enabled of: Allows to use the PCI translator without the PCI core ...
2014-04-01Merge tag 'staging-3.15-rc1' of ↵Linus Torvalds1-0/+151
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the huge drivers/staging/ update for 3.15-rc1. Loads of cleanup fixes, a few drivers removed, and some new ones added. All have been in linux-next for a while" * tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1375 commits) staging: xillybus: XILLYBUS_PCIE depends on PCI_MSI staging: xillybus: Added "select CRC32" for XILLYBUS in Kconfig staging: comedi: poc: remove obsolete driver staging: unisys: replace kzalloc/kfree with UISMALLOC/UISFREE staging: octeon-usb: prevent memory corruption staging: usbip: fix line over 80 characters staging: usbip: fix quoted string split across lines Staging: unisys: Remove RETINT macro Staging: unisys: Remove FAIL macro Staging: unisys: Remove RETVOID macro Staging: unisys: Remove RETPTR macro Staging: unisys: Remove RETBOOL macro Staging: unisys: Remove FAIL_WPOSTCODE_1 macro Staging: unisys: Cleanup macros to get rid of goto statements Staging: unisys: include: Remove unused macros from timskmod.h staging: dgap: fix the rest of the checkpatch warnings in dgap.c Staging: bcm: Remove unnecessary parentheses staging: wlags49_h2: Delete unnecessary braces staging: wlags49_h2: Do not use assignment in if condition staging: wlags49_h2: Enclose macro in a do-while loop ...
2014-03-28of: Add support for ePAPR "stdout-path" propertyGrant Likely1-3/+3
ePAPR 1.1 defines the "stdout-path" property for specifying the console device, but Linux currently only handles the older "linux,stdout-path" property. This patch adds parsing for the new property name. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-03-26Merge remote-tracking branches 'regulator/topic/doc', ↵Mark Brown1-0/+32
'regulator/topic/enable', 'regulator/topic/fan53555', 'regulator/topic/fixed', 'regulator/topic/gpio', 'regulator/topic/lp3971', 'regulator/topic/lp872x' and 'regulator/topic/max14577' into regulator-next
2014-03-20of_mdio: Allow the DT to specify the phy ID and avoid autoprobingJason Gunthorpe1-1/+22
This makes the generic of_mdiobus_register parse the DT compatible string for the pattern ethernet-phy-idAAAA.BBBB. If present it should be a value that matches the phy-id register normally readable through MDIO. When the ID is given the phy autoprobing is defeated and the phy is created directly. This is necessary to support phy's that cannot be autoprobed when of_mdiobus_register is called. Specifically, my case has the phy in reset at of_mdiobus_register, the reset is only released once the ethernet driver starts, before it attaches to the phy. Tested on ARM Kirkwood with phy id 0x01410e90 (Marvell 88E1318) Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-19Merge branch 'devicetree/next-reserved-mem' into devicetree/nextGrant Likely4-0/+367
2014-03-19of: device_node kobject lifecycle fixesPantelis Antoniou3-13/+28
After the move to having device nodes be proper kobjects the lifecycle of the node needs to be controlled better. At first convert of_add_node() in the unflattened functions to of_init_node() which initializes the kobject so that of_node_get/put work correctly even before of_init is called. Afterwards introduce of_node_is_initialized & of_node_is_attached that query the underlying kobject about the state (attached means kobj is visible in sysfs) Using that make sure the lifecycle of the tree is correct at all times. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> [grant.likely: moved of_node_init() calls, fixed up locking, and dropped __of_populate() hunks] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-03-15of: only scan for reserved mem when fdt presentJosh Cartwright1-0/+3
When the reserved memory patches hit -next, several legacy (non-DT) boot failures were detected and bisected down to that commit. There needs to be some sanity checking whether a DT is even present before parsing the reserved ranges. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-03-11of: remove /proc/device-treeGrant Likely2-59/+1
The same data is now available in sysfs, so we can remove the code that exports it in /proc and replace it with a symlink to the sysfs version. Tested on versatile qemu model and mpc5200 eval board. More testing would be appreciated. v5: Fixed up conflicts with mainline changes Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David S. Miller <davem@davemloft.net> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-03-11of/selftest: Add self tests for manipulation of propertiesGrant Likely1-0/+62
Adds a few simple test cases to ensure that addition, update and removal of device tree node properties works correctly. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David S. Miller <davem@davemloft.net> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-03-11of: Make device nodes kobjects so they show up in sysfsGrant Likely4-11/+173
Device tree nodes are already treated as objects, and we already want to expose them to userspace which is done using the /proc filesystem today. Right now the kernel has to do a lot of work to keep the /proc view in sync with the in-kernel representation. If device_nodes are switched to be kobjects then the device tree code can be a whole lot simpler. It also turns out that switching to using /sysfs from /proc results in smaller code and data size, and the userspace ABI won't change if /proc/device-tree symlinks to /sys/firmware/devicetree/base. v7: Add missing sysfs_bin_attr_init() v6: Add __of_add_property() early init fixes from Pantelis v5: Rename firmware/ofw to firmware/devicetree Fix updating property values in sysfs v4: Fixed build error on Powerpc Fixed handling of dynamic nodes on powerpc v3: Fixed handling of duplicate attribute and child node names v2: switch to using sysfs bin_attributes which solve the problem of reporting incorrect property size. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David S. Miller <davem@davemloft.net> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-03-11drivers: of: add support for custom reserved memory driversMarek Szyprowski1-0/+29
Add support for custom reserved memory drivers. Call their init() function for each reserved region and prepare for using operations provided by them with by the reserved_mem->ops array. Based on previous code provided by Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-03-11drivers: of: add initialization code for dynamic reserved memoryMarek Szyprowski4-2/+206
This patch adds support for dynamically allocated reserved memory regions declared in device tree. Such regions are defined by 'size', 'alignment' and 'alloc-ranges' properties. Based on previous code provided by Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-03-11drivers: of: add initialization code for static reserved memoryMarek Szyprowski1-0/+131
This patch adds support for static (defined by 'reg' property) reserved memory regions declared in device tree. Memory blocks can be reliably reserved only during early boot. This must happen before the whole memory management subsystem is initialized, because we need to ensure that the given contiguous blocks are not yet allocated by kernel. Also it must happen before kernel mappings for the whole low memory are created, to ensure that there will be no mappings (for reserved blocks). Typically, all this happens before device tree structures are unflattened, so we need to get reserved memory layout directly from fdt. Based on previous code provided by Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-03-10of_mtd: Add helpers to get ECC strength and ECC step sizeEzequiel Garcia1-0/+34
This commit adds simple helpers to obtain the devicetree properties that specify the ECC strength and ECC step size to use on a given NAND controller. Acked-by: Boris BREZILLON <b.brezillon.dev@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-06of: Warn if of_graph_parse_endpoint is called with the root nodePhilipp Zabel1-0/+3
If of_graph_parse_endpoint is given a parentless node instead of an endpoint node, it is clearly a bug. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-03-06[media] of: move common endpoint parsing to drivers/ofPhilipp Zabel1-0/+28
This patch adds a new struct of_endpoint which is then embedded in struct v4l2_of_endpoint and contains the endpoint properties that are not V4L2 (or even media) specific: the port number, endpoint id, local device tree node and remote endpoint phandle. of_graph_parse_endpoint parses those properties and is used by v4l2_of_parse_endpoint, which just adds the V4L2 MBUS information to the containing v4l2_of_endpoint structure. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-03-06of: Reduce indentation in of_graph_get_next_endpointPhilipp Zabel1-20/+22
A 'return endpoint;' at the end of the (!prev) case allows to reduce the indentation level of the (prev) case. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-03-06of: Warn if of_graph_get_next_endpoint is called with the root nodePhilipp Zabel1-2/+2
If of_graph_get_next_endpoint is given a parentless node instead of an endpoint node, it is clearly a bug. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-03-06[media] of: move graph helpers from drivers/media/v4l2-core to drivers/ofPhilipp Zabel1-0/+118
This patch moves the parsing helpers used to parse connected graphs in the device tree, like the video interface bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt, from drivers/media/v4l2-core/v4l2-of.c into drivers/of/base.c. This allows to reuse the same parser code from outside the V4L2 framework, most importantly from display drivers. The functions v4l2_of_get_next_endpoint, v4l2_of_get_remote_port, and v4l2_of_get_remote_port_parent are moved. They are renamed to of_graph_get_next_endpoint, of_graph_get_remote_port, and of_graph_get_remote_port_parent, respectively. Since there are not that many current users yet, switch all of them to the new functions right away. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-76/+260
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-04Merge tag 'v3.14-rc5' into HEADGrant Likely8-65/+276
Linux 3.14-rc5
2014-03-04Revert "of: fix of_update_property()"Grant Likely1-13/+21
This reverts commit 02ed594e7113644c06ae3a89bc9215d839510efc. The change is completely broken. It attempt to get the previous item in a linked list by grabbing the address of a stack variable. Outright wrong. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-02-21Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds6-76/+260
Pull devicetree fixes from Grant Likely: "Device tree compatible match order bug fix This branch contains a bug fix for the way devicetree code identifies the type of device. Device drivers can contain a list of of_device_ids, but it more than one entry will match, then the device driver may choose the wrong one. Commit 105353145e, "match each node compatible against all given matches first", was queued for v3.14 but ended up causing other bugs. Commit 06b29e76a7 attempted to fix it but it had other bugs. Merely reverting the fix and waiting until v3.15 isn't a good option because there is code in v3.14 that depends on the revised behaviour to boot. This branch should finally fixes the problem correctly. This time instead of just hoping that the patch is correct, this branch also adds new testcases that validate the behaviour. The changes in this branch are larger than I would like for a -rc pull, but moving the test case data out of out of arch/arm so that it could be validated on other architectures was important" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: of: Add self test for of_match_node() of: Move testcase FDT data into drivers/of of: reimplement the matching method for __of_match_node() Revert "of: search the best compatible match first in __of_match_node()"
2014-02-20of: Allows to use the PCI translator without the PCI coreGregory CLEMENT2-3/+9
Translating an address from a PCI node of the device-tree into a CPU physical address doesn't require the core PCI support. Those translations are just related to the device tree itself. The use case to translate an address from a PCI node without actually using the PCI core support is when one needs to access the PCI controller without accessing any PCI devices. Marvell SoCs, such as Kirkwood, Dove or Armada XP for instance, come with an IP of a PCI controller. In the registers of this controller are stored the ID and the revision of a SoC. With this patch it will be possible to read the SoC ID of a board without any PCI device and then without the PCI core support. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-02-20of: Add self test for of_match_node()Grant Likely3-0/+87
Adds a selftest function for the of_match_node function. of_match_node is supposed to handle precedence for the compatible property as well as the name and device_type values. This patch adds some test case data and a function that makes sure each test node matches against the correct entry of an of_device_id table. This code was written to verify the new of_match_node() implementation that is an earlier part of this series. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Kevin Hao <haokexin@gmail.com>
2014-02-20of: Move testcase FDT data into drivers/ofGrant Likely3-0/+99
The testcase data is usable by any platform. This patch moves it into the drivers/of directory so it can be included by any architecture. Using the test cases requires manually adding #include <testcases.dtsi> to the end of the boards .dtsi file and enabling CONFIG_OF_SELFTEST. Not pretty though. A useful project would be to make the testcase code easier to execute. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-02-20of: reimplement the matching method for __of_match_node()Kevin Hao1-36/+75
In the current implementation of __of_match_node(), it will compare each given match entry against all the node's compatible strings with of_device_is_compatible(). To achieve multiple compatible strings per node with ordering from specific to generic, this requires given matches to be ordered from specific to generic. For most of the drivers this is not true and also an alphabetical ordering is more sane there. Therefore, we define a following priority order for the match, and then scan all the entries to find the best match. 1. specific compatible && type && name 2. specific compatible && type 3. specific compatible && name 4. specific compatible 5. general compatible && type && name 6. general compatible && type 7. general compatible && name 8. general compatible 9. type && name 10. type 11. name v5: Fix nested locking bug v4: Short-circuit failure cases instead of mucking with score, and remove extra __of_device_is_compatible() wrapper stub. Move scoring logic directly into __of_device_is_compatible() v3: Also need to bail out when there does have a compatible member in match entry, but it doesn't match with the device node's compatible. v2: Fix the bug such as we get the same score for the following two match entries with the empty node 'name2 { };' struct of_device_id matches[] = { {.name = "name2", }, {.name = "name2", .type = "type1", }, {} }; Signed-off-by: Kevin Hao <haokexin@gmail.com> [grant.likely: added v4 changes] Signed-off-by: Grant Likely <grant.likely@linaro.org> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Tested-by: Stephen Chivers <schivers@csc.com> Tested-by: Sachin Kamat <sachin.kamat@linaro.org>
2014-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-44/+71
Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-8/+14
Pull networking fixes from David Miller: 1) kvaser CAN driver has fixed limits of some of it's table, validate that we won't exceed those limits at probe time. Fix from Olivier Sobrie. 2) Fix rtl8192ce disabling interrupts for too long, from Olivier Langlois. 3) Fix botched shift in ath5k driver, from Dan Carpenter. 4) Fix corruption of deferred packets in TIPC, from Erik Hugne. 5) Fix newlink error path in macvlan driver, from Cong Wang. 6) Fix netpoll deadlock in bonding, from Ding Tianhong. 7) Handle GSO packets properly in forwarding path when fragmentation is necessary on egress, from Florian Westphal. 8) Fix axienet build errors, from Michal Simek. 9) Fix refcounting of ubufs on tx in vhost net driver, from Michael S Tsirkin. 10) Carrier status isn't set properly in hyperv driver, from Haiyang Zhang. 11) Missing pci_disable_device() in tulip_remove_one), from Ingo Molnar. 12) AF_PACKET qdisc bypass mode doesn't adhere to driver provided TX queue selection method. Add a fallback method mechanism to fix this bug, from Daniel Borkmann. 13) Fix regression in link local route handling on GRE tunnels, from Nicolas Dichtel. 14) Bonding can assign dup aggregator IDs in some sequences of configuration, fix by making the allocation counter per-bond instead of global. From Jiri Bohac. 15) sctp_connectx() needs compat translations, from Daniel Borkmann. 16) Fix of_mdio PHY interrupt parsing, from Ben Dooks * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) MAINTAINERS: add entry for the PHY library of_mdio: fix phy interrupt passing net: ethernet: update dependency and help text of mvneta NET: fec: only enable napi if we are successful af_packet: remove a stray tab in packet_set_ring() net: sctp: fix sctp_connectx abi for ia32 emulation/compat mode ipv4: fix counter in_slow_tot irtty-sir.c: Do not set_termios() on irtty_close() bonding: 802.3ad: make aggregator_identifier bond-private usbnet: remove generic hard_header_len check gre: add link local route when local addr is any batman-adv: fix potential kernel paging error for unicast transmissions batman-adv: avoid double free when orig_node initialization fails batman-adv: free skb on TVLV parsing success batman-adv: fix TT CRC computation by ensuring byte order batman-adv: fix potential orig_node reference leak batman-adv: avoid potential race condition when adding a new neighbour batman-adv: properly check pskb_may_pull return value batman-adv: release vlan object after checking the CRC batman-adv: fix TT-TVLV parsing on OGM reception ...
2014-02-18of_mdio: fix phy interrupt passingBen Dooks1-7/+9
The of_mdiobus_register_phy() is not setting phy->irq thus causing some drivers to incorrectly assume that the PHY does not have an IRQ associated with it. Not only do some drivers report no IRQ they do not install an interrupt handler for the PHY. Simplify the code setting irq and set the phy->irq at the same time so that we cover the following issues, which should cover all the cases the code will find: - Set phy->irq if node has irq property and mdio->irq is NULL - Set phy->irq if node has no irq and mdio->irq is not NULL - Leave phy->irq as PHY_POLL default if none of the above This fixes the issue: net eth0: attached PHY 1 (IRQ -1) to driver Micrel KSZ8041RNLI to the correct: net eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18Revert "of: search the best compatible match first in __of_match_node()"Kevin Hao1-42/+1
This reverts commit 06b29e76a74b2373e6f8b5a7938b3630b9ae98b2. As pointed out by Grant Likely, we should also take the type and name into account when searching the best compatible match. That means the match with compatible, type and name should be better than the match just with the same compatible string. So revert this and we will implement another method to find the best match entry. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-02-15of: search the best compatible match first in __of_match_node()Kevin Hao1-1/+42
Currently, of_match_node compares each given match against all node's compatible strings with of_device_is_compatible. To achieve multiple compatible strings per node with ordering from specific to generic, this requires given matches to be ordered from specific to generic. For most of the drivers this is not true and also an alphabetical ordering is more sane there. Therefore, this patch introduces a function to match each of the node's compatible strings against all given compatible matches without type and name first, before checking the next compatible string. This implies that node's compatibles are ordered from specific to generic while given matches can be in any order. If we fail to find such a match entry, then fall-back to the old method in order to keep compatibility. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Kevin Hao <haokexin@gmail.com> Tested-by: Stephen Chivers <schivers@csc.com> Signed-off-by: Rob Herring <robh@kernel.org>
2014-02-14net: of_mdio: fix of_set_phy_supported after driver probingFlorian Fainelli1-1/+5
Commit 8fdade4 ("net: of_mdio: parse "max-speed" property to set PHY supported features") introduced a typo in of_set_phy_supported for the first assignment of phydev->supported which will not effectively limit the PHY device supported features bits if the PHY driver contains "higher" features (e.g: max-speed = <100> and PHY driver has PHY_GBIT_FEATURES set). Fix this by making sure that the very first thing is to reset to sane defaults (PHY_BASIC_FEATURES) and then progressively add speed features as we parse them. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14Revert "OF: base: match each node compatible against all given matches first"Kevin Hao1-37/+16
This reverts commit 105353145eafb3ea919f5cdeb652a9d8f270228e. Stephen Chivers reported this is broken as we will get a match entry '.type = "serial"' instead of the '.compatible = "ns16550"' in the following scenario: serial0: serial@4500 { compatible = "fsl,ns16550", "ns16550"; } struct of_device_id of_platform_serial_table[] = { { .compatible = "ns8250", .data = (void *)PORT_8250, }, { .compatible = "ns16450", .data = (void *)PORT_16450, }, { .compatible = "ns16550a", .data = (void *)PORT_16550A, }, { .compatible = "ns16550", .data = (void *)PORT_16550, }, { .compatible = "ns16750", .data = (void *)PORT_16750, }, { .compatible = "ns16850", .data = (void *)PORT_16850, }, ... { .type = "serial", .data = (void *)PORT_UNKNOWN, }, { /* end of list */ }, }; So just revert this patch, we will use another implementation to find the best compatible match in a follow-on patch. Reported-by: Stephen N Chivers <schivers@csc.com.au> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2014-02-12net: phy: re-design phy_modes to be self-containedFlorian Fainelli1-24/+2
of_get_phy_mode() uses a local array to map phy_interface_t values from include/linux/net/phy.h to a string which is read from the 'phy-mode' or 'phy-connection-type' property. In preparation for exposing the PHY interface mode through sysfs, perform the following: - mode phy_modes from drivers/of/of_net.c to include/linux/phy.h such that it is right below the phy_interface_t enum - make it a static inline function returning the string such that we can use it by just including include/linux/net/phy.h - add a PHY_INTERFACE_MODE_MAX enum value to guard the iteration in of_get_phy_mode() Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12of: add functions to count number of elements in a propertyHeiko Stuebner1-0/+32
The need to know the number of array elements in a property is a common pattern. To prevent duplication of open-coded implementations add a helper static function that also centralises strict sanity checking and DTB format details, as well as a set of wrapper functions for u8, u16, u32 and u64. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@bqreaders.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Grant Likely <grant.likely@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-05of: fix PCI bus match for PCIe slotsKleber Sacilotto de Souza1-2/+3
On IBM pseries systems the device_type device-tree property of a PCIe bridge contains the string "pciex". The of_bus_pci_match() function was looking only for "pci" on this property, so in such cases the bus matching code was falling back to the default bus, causing problems on functions that should be using "assigned-addresses" for region address translation. This patch fixes the problem by also looking for "pciex" on the PCI bus match function. v2: added comment Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2014-02-04of: fix of_update_property()Xiubo Li1-22/+14
The of_update_property() is intented to update a property in a node and if the property does not exist, will add it. The second search of the property is possibly won't be found, that maybe removed by other thread just before the second search begain. Using the __of_find_property() and __of_add_property() instead and move them into lock operations. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-02-04of: add __of_add_property() without lock operationsXiubo Li1-14/+24
There two places will use the same code for adding one new property to the DT node. Adding __of_add_property() and prepare for fixing of_update_property()'s bug. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-02-03of: Clear detach flag on attachPantelis Antoniou1-0/+1
When attaching a node always clear the detach flag. Without this change the sequence detach, attach fails. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-02-03of: make of_get_phy_mode parse 'phy-connection-type'Florian Fainelli1-4/+7
Per the ePAPR v1.1 specification, 'phy-connection-type' is the canonical property name for describing an Ethernet to PHY connection type. Make sure that of_get_phy_mode() also attempts to parse that property and update the comments mentioning 'phy-mode' to also include 'phy-connection-type'. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-64/+92
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-24Merge tag 'devicetree-for-3.14' of ↵Linus Torvalds2-17/+45
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add new documents with guidelines for DT binding stability and review process. This is one of the outcomes of Kernel Summit DT discussions - Remove a bunch of device_type usage which is only for OF and deprecated with FDT - Fix a long standing issue with compatible string match ordering - Various minor binding documentation updates * tag 'devicetree-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: add rockchip vendor prefix serial: vt8500: Add missing binding document for arch-vt8500 serial driver. dt/bindings: submitting patches and ABI documents DT: Add vendor prefix for Emerging Display Technologies of: add vendor prefixe for EPFL of: add vendor prefix for Gumstix of: add vendor prefix for Ka-Ro electronics GmbH devicetree: macb: Document clock properties dts: bindings: trivial clock bindings doc fixes of: Fix __of_device_is_available check dt/bindings: Remove device_type "serial" from marvell,mv64360-mpsc dt/bindings: remove device_type "network" references dt/bindings: remove users of device_type "mdio" dt/bindings: Remove references to linux,phandle properties dt/bindings: Remove all references to device_type "ethernet-phy" of: irq: Ignore disabled intc's when searching map of: irq: Ignore disabled interrupt controllers OF: base: match each node compatible against all given matches first dt-bindings: add GIC-400 binding
2014-01-23Merge remote-tracking branch 'grant/devicetree/next' into for-3.14Rob Herring1-0/+3