summaryrefslogtreecommitdiffstats
path: root/drivers/nvmem
AgeCommit message (Collapse)AuthorFilesLines
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295Thomas Gleixner3-27/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-11/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-04-25nvmem: core: add NVMEM_SYSFS KconfigSrinivas Kandagatla5-260/+335
Many nvmem providers are not very keen on having default sysfs nvmem entry, as most of the usecases for them are inside kernel itself. And in some cases read/writes to some areas in nvmem are restricted and trapped at secure monitor level, so accessing them from userspace would result in board reboots. This patch adds new NVMEM_SYSFS Kconfig to make binary sysfs entry an optional one. This provision will give more flexibility to users. This patch also moves existing sysfs code to a new file so that its not compiled in when its not really required. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Gaurav Kohli <gkohli@codeaurora.org> Tested-by: Gaurav Kohli <gkohli@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: sunxi_sid: Support SID on H6Yangtao Li1-0/+6
Add support for H6's SID controller. It supports 4K-bit EFUSE, bigger than before. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: sunxi-sid: convert to SPDX license tagsYangtao Li1-10/+1
Updates license to use SPDX-License-Identifier. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: imx-iim: use devm_platform_ioremap_resource() to simplify codeAnson Huang1-3/+1
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: mxs-ocotp: use devm_platform_ioremap_resource() to simplify codeAnson Huang1-3/+1
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: imx-ocotp: use devm_platform_ioremap_resource() to simplify codeAnson Huang1-3/+1
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: core: fix read buffer in placeJorge Ramirez-Ortiz1-5/+10
When the bit_offset in the cell is zero, the pointer to the msb will not be properly initialized (ie, will still be pointing to the first byte in the buffer). This being the case, if there are bits to clear in the msb, those will be left untouched while the mask will incorrectly clear bit positions on the first byte. This commit also makes sure that any byte unused in the cell is cleared. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: core: add nvmem_cell_read_u16Fabrice Gasnier1-0/+37
Add nvmem_cell_read_u16() helper to ease read of an u16 value on consumer side. This is inspired by nvmem_cell_read_u32() function. This helper is useful on stm32 that has 16 bits data cells stored in non volatile memory. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: stm32: add support for STM32MP15 BSEC to control OTP dataFabrice Gasnier1-5/+129
On STM32MP15, OTP area may be read/written by using BSEC (boot, security and OTP control). BSEC registers set is composed of various regions, among which control registers and OTP shadow registers. Secure monitor calls are involved in this process to allow (or deny) access to the full range of OTP data. This adds support for reading and writing OTP data using SMC services. Data content can be aligned on 16-bits or 8-bits. Then take care of it, since BSEC data is 32-bits wide. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: Add driver for STM32 factory-programmed read only memFabrice Gasnier3-0/+90
Add a read only nvmem driver for STM32 factory-programmed memory area (on-chip non-volatile storage). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: sunxi_sid: Support SID on A83T and H5Chen-Yu Tsai1-0/+2
The device tree binding already lists compatible strings for these two SoCs. They don't have the defect as seen on the H3, and the size and register layout is the same as the A64. Furthermore, the driver does not include nvmem cell definitions. Add support for these two compatible strings, re-using the config for the A64. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: sunxi_sid: Read out data in native formatChen-Yu Tsai1-22/+1
Originally the SID e-fuses were thought to be in big-endian format. Later sources show that they are in fact native or little-endian. The most compelling evidence is the thermal sensor calibration data, which is a set of one to three 16-bit values. In native-endian they are in 16-bit cells with increasing offsets, whereas with big-endian they are in the wrong order, and a gap with no data will show if there are one or three cells. Switch to a native endian representation for the nvmem device. For the H3, the register read-out method was already returning data in native endian. This only affects the other SoCs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: sunxi_sid: Dynamically allocate nvmem_config structureChen-Yu Tsai1-15/+17
The sunxi_sid driver currently uses a statically allocated nvmem_config structure that is updated at probe time. This is sub-optimal as it limits the driver to one instance, and also takes up space even if the device is not present. Modify the driver to allocate the nvmem_config structure at probe time, plugging in the desired parameters along the way. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: sunxi_sid: Optimize register read-out methodChen-Yu Tsai1-20/+18
SID cells are 32-bit aligned, and a multiple of 32 bits in length. The only outlier is the thermal sensor calibration data, which is 16 bits per sensor. However a whole 64 bits is allocated for this purpose, so we could consider it conforming to the rule above. Also, the register read-out method assumes native endian, unlike the direct MMIO method, which assumes big endian. Thus no endian conversion is involved. Under these assumptions, the register read-out method can be slightly optimized. Instead of reading one word then discarding 3 bytes, read the whole word directly into the buffer. However, for reads under 4 bytes or trailing bytes, we still use a scratch buffer to extract the requested bytes. We could go one step further if .word_size was 4, but changing that would affect the sysfs interface's behavior. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: sunxi_sid: Read out SID for randomness without loopingChen-Yu Tsai1-3/+2
Since the reg_read callbacks already support arbitrary, but 4-byte aligned. offsets and lengths into the SID, there is no need for another for loop just to use it to read 1 byte at a time. Read out the whole SID block in one go. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: imx-ocotp: broaden Kconfig dependencyLucas Stach1-2/+2
The i.MX OCOTP controller is used in numerous Freescale/NXP SoCs from the MXC family, so the strict dependency on the i.MX6 SoC is too narrow. Broaden it to cover all the MXC familiy members. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25nvmem: imx-ocotp: add support for imx8mqLucas Stach1-0/+7
The i.MX8MQ uses the same OCOTP block as the i.MX7D, but with fourfold increase in fuse banks. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-18drivers: Defer probe if firmware is not readyRajan Vaja1-3/+7
Driver needs ZynqMP firmware interface to call EEMI APIs. In case firmware is not ready, dependent drivers should wait until the firmware is ready. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-03-06Merge tag 'char-misc-5.1-rc1' of ↵Linus Torvalds5-41/+65
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...
2019-02-19nvmem: core: don't check the return value of notifier chain callBartosz Golaszewski1-3/+1
blocking_notifier_call_chain() returns the value returned by the last registered callback. A positive return value doesn't indicate an error and an nvmem device should correctly register irrespective of any notifier callback failures. Drop the retval check. Fixes: bee1138bea15 ("nvmem: add a notifier chain") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-05nvmem: zynqmp: Added zynqmp nvmem firmware driverNava kishore Manne3-0/+98
This patch adds zynqmp nvmem firmware driver to access the SoC revision information from the hardware register. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-03nvmem: allow to select i.MX nvmem driver for i.MX 7DStefan Agner1-1/+1
The imx-ocotp nvmem driver supports the i.MX 7D SoC too. Allow to select the imx-ocotp driver even if only the i.MX 7D SoC has been selected. Fixes: 711d45477931 ("nvmem: octop: Add i.MX7D support") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31nvmem: core: Avoid useless iterations in nvmem_cell_get_from_lookup()Alban Bedel1-3/+2
Once the correct cell has been found there is no need to continue iterating, just stop there. While at it replace the goto used to leave the loop with simple break statements. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31nvmem: core: Fix device reference leakAlban Bedel1-0/+2
__nvmem_device_get() make use of bus_find_device() to get the relevant device and this function increase the reference count of the device found, however this is not accounted for anywhere. Fix __nvmem_device_get() and __nvmem_device_put() to properly release this reference count. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31nvmem: core: Always reference the device returned by nvmem_device_get()Alban Bedel1-1/+1
In nvmem_device_get(), when the device lookup fails with DT it currently fallback on nvmem_find() which is wrong for two reasons. First nvmem_find() return NULL when nothing is found instead of an ERR_PTR. But nvmem_find() also just lookup the device, it doesn't reference the module and increment the reference count like it is done in the DT path. To fix this we replace the call to nvmem_find() with a call to __nvmem_device_get() which does all the referencing and return a proper ERR_PTR in case of error. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31nvmem: core: Properly handle connection ID in of_nvmem_device_get()Alban Bedel1-3/+4
of_nvmem_device_get() would crash if NULL was passed as a connection ID. Rework this to use the usual sementic of assuming the first connection when no connection ID is given. Furthermore of_nvmem_device_get() would return -EINVAL when it failed to resolve the connection, making it impossible to properly implement an optional connection. Return -ENOENT instead to let the caller know that the connection doesn't exists. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31nvmem: core: Fix cell lookup when no cell is foundAlban Bedel1-6/+10
If the cell list is not empty and nvmem_find_cell_by_node/name() is called for a cell that is not present in the list they will return an invalid pointer instead of NULL. This happen because list_for_each_entry() stop once it reach the list head again, but as the list head is not contained in a struct nvmem_cell the iteration variable then contains an invalid value. This is easily solved by using a variable to iterate over the list and one to return the cell found. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31nvmem: core: Fix of_nvmem_cell_get() for optional cellsAlban Bedel1-1/+1
of_nvmem_cell_get() should return -ENOENT when a cell isn't defined, otherwise callers can't distinguish between a missing cell and other errors. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31nvmem: core: Set the provider read-only when no write callback is givenAlban Bedel1-2/+2
If no write callback is given the device should be marked as read-only. While at it also move from a bit or to a logical or as that is a logical expression. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31nvmem: imx-ocotp: Implement i.MX6ULL/ULZ supportStefan Wahren1-0/+7
In comparision to the i.MX6UL the lower cost variants i.MX6ULL/ULZ only supports 8 OTP banks a 8 words. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31nvmem: imx-ocotp: add i.MX7ULP supportAnson Huang1-0/+6
i.MX7ULP is a new SoC of i.MX family which has 8 kbit eFuse OTP, enable ocotp driver support for this SoC. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31nvmem: bcm-ocotp: Add ACPI support to BCM OCOTPSrinath Mannam1-17/+20
Add ACPI support to bcm ocotp driver This patch is based on Linux-4.20-rc7. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31nvmem: sc27xx: Convert nvmem offset to block indexFreeman Liu1-4/+8
The Spreadtrum SC27XX efuse data are organized by blocks and each block contains 2 bytes data. Moreover the nvmem core always pass the offset in byte to the controller, so we should change the offset in byte to the correct block index and block offset to read the data. Signed-off-by: Freeman Liu <freeman.liu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06nvmem: add new config optionBartosz Golaszewski1-1/+2
We want to add nvmem support for MTD. TI DaVinci is the first platform that will be using it, but only in non-DT mode. In order not to introduce any new interface to supporting of which we would have to commit - add a new config option that tells nvmem not to use the DT node of the parent device. This way we won't be creating nvmem devices corresponding with MTD partitions defined in device tree. By default MTD will set this new field to true. Once a set of bindings for MTD nvmem cells is agreed upon, we'll be able to remove this option. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06nvmem: Move nvmem_type_str array to its only userAndy Shevchenko1-0/+7
Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually using it. Move nvmem_type_str array to its only user to make a compiler happy: In file included from include/linux/rtc.h:18, from drivers/rtc/rtc-proc.c:15: include/linux/nvmem-provider.h:29:27: warning: 'nvmem_type_str' defined but not used [-Wunused-const-variable=] static const char * const nvmem_type_str[] = { ^~~~~~~~~~~~~~ Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Suggested-by: Joe Perches <joe@perches.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06nvmem: meson-efuse: add peripheral clockJerome Brunet1-0/+25
Get and enable the peripheral clock required by the efuse device. The driver has been handle to work without it so far because the clock was left enabled by default but it won't be the case soon. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06nvmem: meson-efuse: add error message on user_max failure.Jerome Brunet1-1/+3
Add an explicit error message when SM_EFUSE_USER_MAX command fails Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06nvmem: add type attributeAlexandre Belloni1-0/+21
Add a type attribute so userspace is able to know how the data is stored as this can help taking the correct decision when selecting which device to use. This will also help program display the proper warnings when burning fuses for example. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-11nvmem: core: fix regression in of_nvmem_cell_get()Srinivas Kandagatla1-4/+6
NVMEM DT support seems to be totally broken after commit e888d445ac33 ("nvmem: resolve cells from DT at registration time") Fix this! Index used in of_nvmem_cell_get() to find cell is specific to consumer, It can not be used for searching the cell in provider. Use device_node instead of this to find the matching cell in device tree case. Fixes: e888d445ac33 ("nvmem: resolve cells from DT at registration time") Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15nvmem: hide unused nvmem_find_cell_by_index functionArnd Bergmann1-16/+16
nvmem_find_cell_by_index() is only called from inside an #ifdef, so we get a build warning without CONFIG_OF: drivers/nvmem/core.c:496:1: error: 'nvmem_find_cell_by_index' defined but not used [-Werror=unused-function] Move it into the same #ifdef as the caller to avoid the warning. Fixes: e888d445ac33 ("nvmem: resolve cells from DT at registration time") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15nvmem: lpc18xx_eeprom: remove unused variableBartosz Golaszewski1-1/+0
Remove a variable that's no longer used from lpc18xx_eeprom_remove(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15nvmem: fix nvmem_cell_get_from_lookup()Bartosz Golaszewski1-2/+3
We check if the pointer returned by __nvmem_device_get() is not NULL while we should actually check if it is not IS_ERR(nvmem). Fix it. While we're at it: fix the next error path where we should assign an error value to cell before returning. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15nvmem: Convert to using %pOFn instead of device_node.nameRob Herring1-1/+3
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> [srinivas: rebased on top of next] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28nvmem: make nvmem_add_cells() staticSrinivas Kandagatla1-2/+1
Now we have new api nvmem_add/del_cell_table() we do not want users to use nvmem_add_cells() anymore. So mark it accordingly. I guess it was missed in original cleanup patch. This also fixes below warning: core.c:355:5: warning: no previous prototype for 'nvmem_add_cells' [-Wmissing-prototypes] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>