summaryrefslogtreecommitdiffstats
path: root/drivers/nvme
AgeCommit message (Collapse)AuthorFilesLines
2021-10-27nvmet-tcp: fix data digest pointer calculationVarun Prakash1-1/+1
exp_ddgst is of type __le32, &cmd->exp_ddgst + cmd->offset increases &cmd->exp_ddgst by 4 * cmd->offset, fix this by type casting &cmd->exp_ddgst to u8 *. Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvme-tcp: fix data digest pointer calculationVarun Prakash1-1/+1
ddgst is of type __le32, &req->ddgst + req->offset increases &req->ddgst by 4 * req->offset, fix this by type casting &req->ddgst to u8 *. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvme-tcp: fix possible req->offset corruptionVarun Prakash1-1/+2
With commit db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") r2t and response PDU can get processed while send function is executing. Current data digest send code uses req->offset after kernel_sendmsg(), this creates a race condition where req->offset gets reset before it is used in send function. This can happen in two cases - 1. Target sends r2t PDU which resets req->offset. 2. Target send response PDU which completes the req and then req is used for a new command, nvme_tcp_setup_cmd_pdu() resets req->offset. Fix this by storing req->offset in a local variable and using this local variable after kernel_sendmsg(). Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-26nvme-tcp: fix H2CData PDU send accounting (again)Sagi Grimberg1-1/+3
We should not access request members after the last send, even to determine if indeed it was the last data payload send. The reason is that a completion could have arrived and trigger a new execution of the request which overridden these members. This was fixed by commit 825619b09ad3 ("nvme-tcp: fix possible use-after-completion"). Commit e371af033c56 broke that assumption again to address cases where multiple r2t pdus are sent per request. To fix it, we need to record the request data_sent and data_len and after the payload network send we reference these counters to determine weather we should advance the request iterator. Fixes: e371af033c56 ("nvme-tcp: fix incorrect h2cdata pdu offset accounting") Reported-by: Keith Busch <kbusch@kernel.org> Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-26nvmet-tcp: fix a memory leak when releasing a queueMaurizio Lombardi1-0/+3
page_frag_free() won't completely release the memory allocated for the commands, the cache page must be explicitly freed by calling __page_frag_cache_drain(). This bug can be easily reproduced by repeatedly executing the following command on the initiator: $echo 1 > /sys/devices/virtual/nvme-fabrics/ctl/nvme0/reset_controller Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-25fs: get rid of the res2 iocb->ki_complete argumentJens Axboe1-2/+2
The second argument was only used by the USB gadget code, yet everyone pays the overhead of passing a zero to be passed into aio, where it ends up being part of the aio res2 value. Now that everybody is passing in zero, kill off the extra argument. Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20nvmet: use struct_size over open coded arithmeticLen Baker1-2/+2
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. In this case this is not actually dynamic size: all the operands involved in the calculation are constant values. However it is better to refactor this anyway, just to keep the open-coded math idiom out of code. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kmalloc() function. This code was detected with the help of Coccinelle and audited and fixed manually. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme: drop scan_lock and always kick requeue list when removing namespacesHannes Reinecke1-5/+4
When reading the partition table on initial scan hits an I/O error the I/O will hang with the scan_mutex held: [<0>] do_read_cache_page+0x49b/0x790 [<0>] read_part_sector+0x39/0xe0 [<0>] read_lba+0xf9/0x1d0 [<0>] efi_partition+0xf1/0x7f0 [<0>] bdev_disk_changed+0x1ee/0x550 [<0>] blkdev_get_whole+0x81/0x90 [<0>] blkdev_get_by_dev+0x128/0x2e0 [<0>] device_add_disk+0x377/0x3c0 [<0>] nvme_mpath_set_live+0x130/0x1b0 [nvme_core] [<0>] nvme_mpath_add_disk+0x150/0x160 [nvme_core] [<0>] nvme_alloc_ns+0x417/0x950 [nvme_core] [<0>] nvme_validate_or_alloc_ns+0xe9/0x1e0 [nvme_core] [<0>] nvme_scan_work+0x168/0x310 [nvme_core] [<0>] process_one_work+0x231/0x420 and trying to delete the controller will deadlock as it tries to grab the scan mutex: [<0>] nvme_mpath_clear_ctrl_paths+0x25/0x80 [nvme_core] [<0>] nvme_remove_namespaces+0x31/0xf0 [nvme_core] [<0>] nvme_do_delete_ctrl+0x4b/0x80 [nvme_core] As we're now properly ordering the namespace list there is no need to hold the scan_mutex in nvme_mpath_clear_ctrl_paths() anymore. And we always need to kick the requeue list as the path will be marked as unusable and I/O will be requeued _without_ a current path. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme-pci: clear shadow doorbell memory on resetsKeith Busch1-1/+8
The host memory doorbell and event buffers need to be initialized on each reset so the driver doesn't observe stale values from the previous instantiation. Signed-off-by: Keith Busch <kbusch@kernel.org> Tested-by: John Levon <john.levon@nutanix.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme-rdma: fix error code in nvme_rdma_setup_ctrlMax Gurtovoy1-0/+2
In case that icdoff is not zero or mandatory keyed sgls are not supported by the NVMe/RDMA target, we'll go to error flow but we'll return 0 to the caller. Fix it by returning an appropriate error code. Fixes: c66e2998c8ca ("nvme-rdma: centralize controller setup sequence") Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme-multipath: add error handling support for add_disk()Luis Chamberlain1-2/+12
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Since we now can tell for sure when a disk was added, move setting the bit NVME_NSHEAD_DISK_LIVE only when we did add the disk successfully. Nothing to do here as the cleanup is done elsewhere. We take care and use test_and_set_bit() because it is protects against two nvme paths simultaneously calling device_add_disk() on the same namespace head. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: use macro definitions for setting cmic valueMax Gurtovoy1-1/+2
This makes the code more readable. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: use macro definition for setting nmic valueMax Gurtovoy1-1/+1
This makes the code more readable. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme: display correct subsystem NQNHannes Reinecke5-4/+11
With discovery controllers supporting unique subsystem NQNs the actual subsystem NQN might be different from that one passed in via the connect args. So add a helper to display the resulting subsystem NQN. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme: Add connect option 'discovery'Hannes Reinecke3-1/+13
Add a connect option 'discovery' to specify that the connection should be made to a discovery controller, not a normal I/O controller. With discovery controllers supporting unique subsystem NQNs we cannot easily distinguish by the subsystem NQN if this should be a discovery connection, but we need this information to blank out options not supported by discovery controllers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme: expose subsystem type in sysfs attribute 'subsystype'Hannes Reinecke2-0/+28
With unique discovery controller NQNs we cannot distinguish the subsystem type by the NQN alone, but need to check the subsystem type, too. So expose the subsystem type in a new sysfs attribute 'subsystype'. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: set 'CNTRLTYPE' in the identify controller dataHannes Reinecke3-1/+9
Set the correct 'CNTRLTYPE' field in the identify controller data. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: add nvmet_is_disc_subsys() helperHannes Reinecke3-4/+9
Add a helper function to determine if a given subsystem is a discovery subsystem. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: make discovery NQN configurableHannes Reinecke2-1/+41
TPAR8013 allows for unique discovery NQNs, so make the discovery controller NQN configurable by exposing a subsys attribute 'discovery_nqn'. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet-rdma: implement get_max_queue_size controller opMax Gurtovoy1-0/+6
Limit the maximal queue size for RDMA controllers. Today, the target reports a limit of 1024 and this limit isn't valid for some of the RDMA based controllers. For now, limit RDMA transport to 128 entries (the max queue depth configured for Linux NVMe/RDMA host). Future general solution should use RDMA/core API to calculate this size according to device capabilities and number of WRs needed per NVMe IO request. Reported-by: Mark Ruijter <mruijter@primelogic.nl> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: add get_max_queue_size op for controllersMax Gurtovoy2-3/+6
Some transports, such as RDMA, would like to set the queue size according to device/port/ctrl characteristics. Add a new nvmet transport op that is called during ctrl initialization. This will not effect transports that don't implement this option. Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme-rdma: limit the maximal queue size for RDMA controllersMax Gurtovoy1-0/+7
Corrent limit of 1024 isn't valid for some of the RDMA based ctrls. In case the target expose a cap of larger amount of entries (e.g. 1024), the initiator may fail to create a QP with this size. Thus limit to a value that works for all RDMA adapters. Future general solution should use RDMA/core API to calculate this size according to device capabilities and number of WRs needed per NVMe IO request. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet-tcp: fix use-after-free when a port is removedIsrael Rukshin1-0/+16
When removing a port, all its controllers are being removed, but there are queues on the port that doesn't belong to any controller (during connection time). This causes a use-after-free bug for any command that dereferences req->port (like in nvmet_alloc_ctrl). Those queues should be destroyed before freeing the port via configfs. Destroy the remaining queues after the accept_work was cancelled guarantees that no new queue will be created. Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet-rdma: fix use-after-free when a port is removedIsrael Rukshin1-0/+24
When removing a port, all its controllers are being removed, but there are queues on the port that doesn't belong to any controller (during connection time). This causes a use-after-free bug for any command that dereferences req->port (like in nvmet_alloc_ctrl). Those queues should be destroyed before freeing the port via configfs. Destroy the remaining queues after the RDMA-CM was destroyed guarantees that no new queue will be created. Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvmet: fix use-after-free when a port is removedIsrael Rukshin1-0/+2
When a port is removed through configfs, any connected controllers are starting teardown flow asynchronously and can still send commands. This causes a use-after-free bug for any command that dereferences req->port (like in nvmet_parse_io_cmd). To fix this, wait for all the teardown scheduled works to complete (like release_work at rdma/tcp drivers). This ensures there are no active controllers when the port is eventually removed. Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme-fc: add support for ->map_queuesSaurav Kashyap1-0/+24
NVMe FC don't have support for map queues, unlike the PCI, RDMA and TCP transports. Add a ->map_queues callout for the LLDDs to provide such functionality. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme: generate uevent once a multipath namespace is operational againHannes Reinecke1-2/+5
When fast_io_fail_tmo is set I/O will be aborted while recovery is still ongoing. This causes MD to set the namespace to failed, and no futher I/O will be submitted to that namespace. However, once the recovery succeeds and the namespace becomes operational again the NVMe subsystem doesn't send a notification, so MD cannot automatically reinstate operation and requires manual interaction. This patch will send a KOBJ_CHANGE uevent per multipathed namespace once the underlying controller transitions to LIVE, allowing an automatic MD reassembly with these udev rules: /etc/udev/rules.d/65-md-auto-re-add.rules: SUBSYSTEM!="block", GOTO="md_end" ACTION!="change", GOTO="md_end" ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end" PROGRAM="/sbin/md_raid_auto_readd.sh $devnode" LABEL="md_end" /sbin/md_raid_auto_readd.sh: MDADM=/sbin/mdadm DEVNAME=$1 export $(${MDADM} --examine --export ${DEVNAME}) if [ -z "${MD_UUID}" ]; then exit 1 fi UUID_LINK=$(readlink /dev/disk/by-id/md-uuid-${MD_UUID}) MD_DEVNAME=${UUID_LINK##*/} export $(${MDADM} --detail --export /dev/${MD_DEVNAME}) if [ -z "${MD_METADATA}" ] ; then exit 1 fi if [ $(cat /sys/block/${MD_DEVNAME}/md/degraded) != 1 ]; then echo "${MD_DEVNAME}: array not degraded, nothing to do" exit 0 fi MD_STATE=$(cat /sys/block/${MD_DEVNAME}/md/array_state) if [ ${MD_STATE} != "clean" ] ; then echo "${MD_DEVNAME}: array state ${MD_STATE}, cannot re-add" exit 1 fi MD_VARNAME="MD_DEVICE_dev_${DEVNAME##*/}_ROLE" if [ ${!MD_VARNAME} = "spare" ] ; then ${MDADM} --manage /dev/${MD_DEVNAME} --re-add ${DEVNAME} fi Changes to v2: - Add udev rules example to description Changes to v1: - use disk_uevent() as suggested by hch Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-19nvme: loop: clear NVME_CTRL_ADMIN_Q_STOPPED after admin queue is reallocatedMing Lei1-0/+2
The nvme-loop's admin queue may be freed and reallocated, and we have to reset the flag of NVME_CTRL_ADMIN_Q_STOPPED so that the flag can match with the quiesce state of the admin queue. nvme-loop is the only driver to reallocate request queue, and not see such usage in other nvme drivers. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211014081710.1871747-6-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19nvme: paring quiesce/unquiesceMing Lei2-4/+10
The current blk_mq_quiesce_queue() and blk_mq_unquiesce_queue() always stops and starts the queue unconditionally. And there can be concurrent quiesce/unquiesce coming from different unrelated code paths, so unquiesce may come unexpectedly and start queue too early. Prepare for supporting concurrent quiesce/unquiesce from multiple contexts, so that we can address the above issue. NVMe has very complicated quiesce/unquiesce use pattern, add one atomic bit for makeiing sure that blk-mq quiece/unquiesce is always called in pair. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211014081710.1871747-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19nvme: prepare for pairing quiescing and unquiescingMing Lei1-21/+31
Add two helpers so that we can prepare for pairing quiescing and unquiescing which will be done in next patch. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211014081710.1871747-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19nvme: apply nvme API to quiesce/unquiesce admin queueMing Lei6-26/+26
Apply the added two APIs to quiesce/unquiesce admin queue. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211014081710.1871747-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19nvme: add APIs for stopping/starting admin queueMing Lei2-0/+14
Add two APIs for stopping and starting admin queue. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211014081710.1871747-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19nvme: don't memset() the normal read/write commandJens Axboe1-2/+6
This memset in the fast path costs a lot of cycles on my setup. Here's a top-of-profile of doing ~6.7M IOPS: + 5.90% io_uring [nvme] [k] nvme_queue_rq + 5.32% io_uring [nvme_core] [k] nvme_setup_cmd + 5.17% io_uring [kernel.vmlinux] [k] io_submit_sqes + 4.97% io_uring [kernel.vmlinux] [k] blkdev_direct_IO and a perf diff with this patch: 0.92% +4.40% [nvme_core] [k] nvme_setup_cmd reducing it from 5.3% to only 0.9%. This takes it from the 2nd most cycle consumer to something that's mostly irrelevant. Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19nvme: move command clear into the various setup helpersJens Axboe2-3/+9
We don't have to worry about doing extra memsets by moving it outside the protection of RQF_DONTPREP, as nvme doesn't do partial completions. This is in preparation for making the read/write fast path not do a full memset of the command. Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18nvmet: use bdev_nr_bytes instead of open coding itChristoph Hellwig1-2/+2
Use the proper helper to read the block device size. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20211018101130.1838532-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18nvme: wire up completion batching for the IRQ pathJens Axboe1-1/+5
Trivial to do now, just need our own io_comp_batch on the stack and pass that in to the usual command completion handling. I pondered making this dependent on how many entries we had to process, but even for a single entry there's no discernable difference in performance or latency. Running a sync workload over io_uring: t/io_uring -b512 -d1 -s1 -c1 -p0 -F1 -B1 -n2 /dev/nvme1n1 /dev/nvme2n1 yields the below performance before the patch: IOPS=254820, BW=124MiB/s, IOS/call=1/1, inflight=(1 1) IOPS=251174, BW=122MiB/s, IOS/call=1/1, inflight=(1 1) IOPS=250806, BW=122MiB/s, IOS/call=1/1, inflight=(1 1) and the following after: IOPS=255972, BW=124MiB/s, IOS/call=1/1, inflight=(1 1) IOPS=251920, BW=123MiB/s, IOS/call=1/1, inflight=(1 1) IOPS=251794, BW=122MiB/s, IOS/call=1/1, inflight=(1 1) which definitely isn't slower, about the same if you factor in a bit of variance. For peak performance workloads, benchmarking shows a 2% improvement. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18nvme: add support for batched completion of polled IOJens Axboe3-12/+51
Take advantage of struct io_comp_batch, if passed in to the nvme poll handler. If it's set, rather than complete each request individually inline, store them in the io_comp_batch list. We only do so for requests that will complete successfully, anything else will be completed inline as before. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: add a struct io_comp_batch argument to fops->iopoll()Jens Axboe3-4/+4
struct io_comp_batch contains a list head and a completion handler, which will allow completions to more effciently completed batches of IO. For now, no functional changes in this patch, we just define the io_comp_batch structure and add the argument to the file_operations iopoll handler. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18nvme-multipath: enable polled I/OChristoph Hellwig1-1/+15
Set the poll queue flag to enable polling, given that the multipath node just dispatches the bios to a lower queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-17-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: switch polling to be bio basedChristoph Hellwig1-4/+2
Replace the blk_poll interface that requires the caller to keep a queue and cookie from the submissions with polling based on the bio. Polling for the bio itself leads to a few advantages: - the cookie construction can made entirely private in blk-mq.c - the caller does not need to remember the request_queue and cookie separately and thus sidesteps their lifetime issues - keeping the device and the cookie inside the bio allows to trivially support polling BIOs remapping by stacking drivers - a lot of code to propagate the cookie back up the submission path can be removed entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: rename REQ_HIPRI to REQ_POLLEDChristoph Hellwig1-1/+1
Unlike the RWF_HIPRI userspace ABI which is intentionally kept vague, the bio flag is specific to the polling implementation, so rename and document it properly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-12-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: move integrity handling out of <linux/blkdev.h>Christoph Hellwig5-0/+5
Split the integrity/metadata handling definitions out into a new header. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-17-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-14Merge tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme into block-5.15Jens Axboe3-12/+13
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15: - fix the abort command id (Keith Busch) - nvme: fix per-namespace chardev deletion (Adam Manzanares)" * tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme: nvme: fix per-namespace chardev deletion nvme-pci: Fix abort command id
2021-10-14nvme: fix per-namespace chardev deletionAdam Manzanares2-11/+12
Decrease reference count of chardevice during char device deletion in order to fix a memory leak. Add a release callabck for the device associated chardev and move ida_simple_remove into the release function. Fixes: 2637baed7801 ("nvme: introduce generic per-namespace chardev") Reported-by: Yi Zhang <yi.zhang@redhat.com> Suggested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Adam Manzanares <a.manzanares@samsung.com> Reviewed-by: Javier González <javier@javigon.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-07nvme-pci: Fix abort command idKeith Busch1-1/+1
The request tag is no longer the only component of the command id. Fixes: e7006de6c2380 ("nvme: code command_id with a genctr for use-after-free validation") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2021-09-27nvme: add command id quirk for apple controllersKeith Busch3-2/+11
Some apple controllers use the command id as an index to implementation specific data structures and will fail if the value is out of bounds. The nvme driver's recently introduced command sequence number breaks this controller. Provide a quirk so these spec incompliant controllers can function as before. The driver will not have the ability to detect bad completions when this quirk is used, but we weren't previously checking this anyway. The quirk bit was selected so that it can readily apply to stable. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214509 Cc: Sven Peter <sven@svenpeter.dev> Reported-by: Orlando Chamberlain <redecorating@protonmail.com> Reported-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20210927154306.387437-1-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-21nvme: keep ctrl->namespaces orderedChristoph Hellwig1-16/+17
Various places in the nvme code that rely on ctrl->namespace to be ordered. Ensure that the namespae is inserted into the list at the right position from the start instead of sorting it after the fact. Fixes: 540c801c65eb ("NVMe: Implement namespace list scanning") Reported-by: Anton Eidelman <anton.eidelman@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
2021-09-21nvme-tcp: fix incorrect h2cdata pdu offset accountingSagi Grimberg1-3/+10
When the controller sends us multiple r2t PDUs in a single request we need to account for it correctly as our send/recv context run concurrently (i.e. we get a new r2t with r2t_offset before we updated our iterator and req->data_sent marker). This can cause wrong offsets to be sent to the controller. To fix that, we will first know that this may happen only in the send sequence of the last page, hence we will take the r2t_offset to the h2c PDU data_offset, and in nvme_tcp_try_send_data loop, we make sure to increment the request markers also when we completed a PDU but we are expecting more r2t PDUs as we still did not send the entire data of the request. Fixes: 825619b09ad3 ("nvme-tcp: fix possible use-after-completion") Reported-by: Nowak, Lukasz <Lukasz.Nowak@Dell.com> Tested-by: Nowak, Lukasz <Lukasz.Nowak@Dell.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-21nvme-fc: remove freeze/unfreeze around update_nr_hw_queuesJames Smart1-2/+0
Remove the freeze/unfreeze around changes to the number of hardware queues. Study and retest has indicated there are no ios that can be active at this point so there is nothing to freeze. nvme-fc is draining the queues in the shutdown and error recovery path in __nvme_fc_abort_outstanding_ios. This patch primarily reverts 88e837ed0f1f "nvme-fc: wait for queues to freeze before calling update_hr_hw_queues". It's not an exact revert as it leaves the adjusting of hw queues only if the count changes. Signed-off-by: James Smart <jsmart2021@gmail.com> [dwagner: added explanation why no IO is pending] Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-21nvme-fc: avoid race between time out and tear downJames Smart1-0/+2
To avoid race between time out and tear down, in tear down process, first we quiesce the queue, and then delete the timer and cancel the time out work for the queue. This patch merges the admin and io sync ops into the queue teardown logic as shown in the RDMA patch 3017013dcc "nvme-rdma: avoid race between time out and tear down". There is no teardown_lock in nvme-fc. Signed-off-by: James Smart <jsmart2021@gmail.com> Tested-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-05 20:14:50 +0000