summaryrefslogtreecommitdiffstats
path: root/drivers/nvme
AgeCommit message (Collapse)AuthorFilesLines
2021-01-20nvme-pci: fix error unwind in nvme_map_dataChristoph Hellwig1-10/+18
Properly unwind step by step using refactored helpers from nvme_unmap_data to avoid a potential double dma_unmap on a mapping failure. Fixes: 7fe07d14f71f ("nvme-pci: merge nvme_free_iod into nvme_unmap_data") Reported-by: Marc Orr <marcorr@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Marc Orr <marcorr@google.com>
2021-01-20nvme-pci: refactor nvme_unmap_dataChristoph Hellwig1-28/+49
Split out three helpers from nvme_unmap_data that will allow finer grained unwinding from nvme_map_data. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Marc Orr <marcorr@google.com>
2021-01-18nvmet: set right status on error in id-ns handlerChaitanya Kulkarni1-2/+6
The function nvmet_execute_identify_ns() doesn't set the status if call to nvmet_find_namespace() fails. In that case we set the status of the request to the value return by the nvmet_copy_sgl(). Set the status to NVME_SC_INVALID_NS and adjust the code such that request will have the right status on nvmet_find_namespace() failure. Without this patch :- NVME Identify Namespace 3: nsze : 0 ncap : 0 nuse : 0 nsfeat : 0 nlbaf : 0 flbas : 0 mc : 0 dpc : 0 dps : 0 nmic : 0 rescap : 0 fpi : 0 dlfeat : 0 nawun : 0 nawupf : 0 nacwu : 0 nabsn : 0 nabo : 0 nabspf : 0 noiob : 0 nvmcap : 0 mssrl : 0 mcl : 0 msrc : 0 nsattr : 0 nvmsetid: 0 anagrpid: 0 endgid : 0 nguid : 00000000000000000000000000000000 eui64 : 0000000000000000 lbaf 0 : ms:0 lbads:0 rp:0 (in use) With this patch-series :- feb3b88b501e (HEAD -> nvme-5.11) nvmet: remove extra variable in identify ns 6302aa67210a nvmet: remove extra variable in id-desclist ed57951da453 nvmet: remove extra variable in smart log nsid be384b8c24dc nvmet: set right status on error in id-ns handler NVMe status: INVALID_NS: The namespace or the format of that namespace is invalid(0xb) Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-18nvme-pci: allow use of cmb on v1.4 controllersKlaus Jensen1-0/+14
Since NVMe v1.4 the Controller Memory Buffer must be explicitly enabled by the host. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [hch: avoid a local variable and add a comment] Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-18nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeoutChao Leng1-4/+10
Each name space has a request queue, if complete request long time, multi request queues may have time out requests at the same time, nvme_tcp_timeout will execute concurrently. Multi requests in different request queues may be queued in the same tcp queue, multi nvme_tcp_timeout may call nvme_tcp_stop_queue at the same time. The first nvme_tcp_stop_queue will clear NVME_TCP_Q_LIVE and continue stopping the tcp queue(cancel io_work), but the others check NVME_TCP_Q_LIVE is already cleared, and then directly complete the requests, complete request before the io work is completely canceled may lead to a use-after-free condition. Add a multex lock to serialize nvme_tcp_stop_queue. Signed-off-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-18nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeoutChao Leng1-4/+11
A crash happens when inject completing request long time(nearly 30s). Each name space has a request queue, when inject completing request long time, multi request queues may have time out requests at the same time, nvme_rdma_timeout will execute concurrently. Multi requests in different request queues may be queued in the same rdma queue, multi nvme_rdma_timeout may call nvme_rdma_stop_queue at the same time. The first nvme_rdma_timeout will clear NVME_RDMA_Q_LIVE and continue stopping the rdma queue(drain qp), but the others check NVME_RDMA_Q_LIVE is already cleared, and then directly complete the requests, complete request before the qp is fully drained may lead to a use-after-free condition. Add a multex lock to serialize nvme_rdma_stop_queue. Signed-off-by: Chao Leng <lengchao@huawei.com> Tested-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Israel Rukshin <israelr@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-18nvme: check the PRINFO bit before deciding the host buffer lengthRevanth Rajashekar1-2/+15
According to NVMe spec v1.4, section 8.3.1, the PRINFO bit and the metadata size play a vital role in deteriming the host buffer size. If PRIFNO bit is set and MS==8, the host doesn't add the metadata buffer, instead the controller adds it. Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-14nvme: don't intialize hwmon for discovery controllersSagi Grimberg1-3/+8
Discovery controllers usually don't support smart log page command. So when we connect to the discovery controller we see this warning: nvme nvme0: Failed to read smart log (error 24577) nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.123.1:8009 nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery" Introduce a new helper to understand if the controller is a discovery controller and use this helper to skip nvme_init_hwmon (also use it in other places that we check if the controller is a discovery controller). Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-14nvme-tcp: fix possible data corruption with bio mergesSagi Grimberg1-1/+1
When a bio merges, we can get a request that spans multiple bios, and the overall request payload size is the sum of all bios. When we calculate how much we need to send from the existing bio (and bvec), we did not take into account the iov_iter byte count cap. Since multipage bvecs support, bvecs can split in the middle which means that when we account for the last bvec send we should also take the iov_iter byte count cap as it might be lower than the last bvec size. Reported-by: Hao Wang <pkuwangh@gmail.com> Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Tested-by: Hao Wang <pkuwangh@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-14nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPTSagi Grimberg1-1/+1
We shouldn't call smp_processor_id() in a preemptible context, but this is advisory at best, so instead call __smp_processor_id(). Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") Reported-by: Or Gerlitz <gerlitz.or@gmail.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-14nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANYIsrael Rukshin1-8/+8
When setting port traddr to INADDR_ANY, the listening cm_id->device is NULL. The associate IB device is known only when a connect request event arrives, so checking T10-PI device capability should be done at this stage. Fixes: b09160c3996c ("nvmet-rdma: add metadata/T10-PI support") Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme: remove the unused status argument from nvme_trace_bio_completeMax Gurtovoy2-5/+3
The only used argument in this function is the "req". Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvmet-rdma: Fix list_del corruption on queue establishment failureIsrael Rukshin1-0/+10
When a queue is in NVMET_RDMA_Q_CONNECTING state, it may has some requests at rsp_wait_list. In case a disconnect occurs at this state, no one will empty this list and will return the requests to free_rsps list. Normally nvmet_rdma_queue_established() free those requests after moving the queue to NVMET_RDMA_Q_LIVE state, but in this case __nvmet_rdma_queue_disconnect() is called before. The crash happens at nvmet_rdma_free_rsps() when calling list_del(&rsp->free_list), because the request exists only at the wait list. To fix the issue, simply clear rsp_wait_list when destroying the queue. Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme: unexport functions with no external callerMinwoo Im2-7/+2
There are no callers for nvme_reset_ctrl_sync() and nvme_alloc_request_qid() so that we keep the symbols exported. Unexport those functions, mark them static and update the header file respectively. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme: avoid possible double fetch in handling CQELalithambika Krishnakumar1-3/+4
While handling the completion queue, keep a local copy of the command id from the DMA-accessible completion entry. This silences a time-of-check to time-of-use (TOCTOU) warning from KF/x[1], with respect to a Thunderclap[2] vulnerability analysis. The double-read impact appears benign. There may be a theoretical window for @command_id to be used as an adversary-controlled array-index-value for mounting a speculative execution attack, but that mitigation is saved for a potential follow-on. A man-in-the-middle attack on the data payload is out of scope for this analysis and is hopefully mitigated by filesystem integrity mechanisms. [1] https://github.com/intel/kernel-fuzzer-for-xen-project [2] http://thunderclap.io/thunderclap-paper-ndss2019.pdf Signed-off-by: Lalithambika Krishna Kumar <lalithambika.krishnakumar@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-tcp: Fix possible race of io_work and direct sendSagi Grimberg1-1/+11
We may send a request (with or without its data) from two paths: 1. From our I/O context nvme_tcp_io_work which is triggered from: - queue_rq - r2t reception - socket data_ready and write_space callbacks 2. Directly from queue_rq if the send_list is empty (because we want to save the context switch associated with scheduling our io_work). However, given that now we have the send_mutex, we may run into a race condition where none of these contexts will send the pending payload to the controller. Both io_work send path and queue_rq send path opportunistically attempt to acquire the send_mutex however queue_rq only attempts to send a single request, and if io_work context fails to acquire the send_mutex it will complete without rescheduling itself. The race can trigger with the following sequence: 1. queue_rq sends request (no incapsule data) and blocks 2. RX path receives r2t - prepares data PDU to send, adds h2cdata PDU to the send_list and schedules io_work 3. io_work triggers and cannot acquire the send_mutex - because of (1), ends without self rescheduling 4. queue_rq completes the send, and completes ==> no context will send the h2cdata - timeout. Fix this by having queue_rq sending as much as it can from the send_list such that if it still has any left, its because the socket buffer is full and the socket write_space callback will trigger, thus guaranteeing that a context will be scheduled to send the h2cdata PDU. Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") Reported-by: Potnuri Bharat Teja <bharat@chelsio.com> Reported-by: Samuel Jones <sjones@kalrayinc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQNGopal Tiwari1-1/+2
A system with more than one of these SSDs will only have one usable. Hence the kernel fails to detect nvme devices due to duplicate cntlids. [ 6.274554] nvme nvme1: Duplicate cntlid 33 with nvme0, rejecting [ 6.274566] nvme nvme1: Removing after probe failure status: -22 Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue. Signed-off-by: Gopal Tiwari <gtiwari@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-fcloop: Fix sscanf type and list_first_entry_or_null warningsJames Smart1-3/+4
Kernel robot had the following warnings: >> fcloop.c:1506:6: warning: %x in format string (no. 1) requires >> 'unsigned int *' but the argument type is 'signed int *'. >> [invalidScanfArgType_int] >> if (sscanf(buf, "%x:%d:%d", &opcode, &starting, &amount) != 3) >> ^ Resolve by changing opcode from and int to an unsigned int and >> fcloop.c:1632:32: warning: Uninitialized variable: lport [uninitvar] >> ret = __wait_localport_unreg(lport); >> ^ >> fcloop.c:1615:28: warning: Uninitialized variable: nport [uninitvar] >> ret = __remoteport_unreg(nport, rport); >> ^ These aren't actual issues as the values are assigned prior to use. It appears the tool doesn't understand list_first_entry_or_null(). Regardless, quiet the tool by initializing the pointers to NULL at declaration. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt contextJames Smart1-1/+14
Recent patches changed calling sequences. nvme_fc_abort_outstanding_ios used to be called from a timeout or work context. Now it is being called in an io completion context, which can be an interrupt handler. Unfortunately, the abort outstanding ios routine attempts to stop nvme queues and nested routines that may try to sleep, which is in conflict with the interrupt handler. Correct replacing the direct call with a work element scheduling, and the abort outstanding ios routine will be called in the work element. Fixes: 95ced8a2c72d ("nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery") Signed-off-by: James Smart <james.smart@broadcom.com> Reported-by: Daniel Wagner <dwagner@suse.de> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-2/+3
Pull rdma updates from Jason Gunthorpe: "A smaller set of patches, nothing stands out as being particularly major this cycle. The biggest item would be the new HIP09 HW support from HNS, otherwise it was pretty quiet for new work here: - Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw, cxgb4, mlx4 and mlx5 - Bug fixes and polishing for the new rts ULP - Cleanup of uverbs checking for allowed driver operations - Use sysfs_emit all over the place - Lots of bug fixes and clarity improvements for hns - hip09 support for hns - NDR and 50/100Gb signaling rates - Remove dma_virt_ops and go back to using the IB DMA wrappers - mlx5 optimizations for contiguous DMA regions" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits) RDMA/cma: Don't overwrite sgid_attr after device is released RDMA/mlx5: Fix MR cache memory leak RDMA/rxe: Use acquire/release for memory ordering RDMA/hns: Simplify AEQE process for different types of queue RDMA/hns: Fix inaccurate prints RDMA/hns: Fix incorrect symbol types RDMA/hns: Clear redundant variable initialization RDMA/hns: Fix coding style issues RDMA/hns: Remove unnecessary access right set during INIT2INIT RDMA/hns: WARN_ON if get a reserved sl from users RDMA/hns: Avoid filling sl in high 3 bits of vlan_id RDMA/hns: Do shift on traffic class when using RoCEv2 RDMA/hns: Normalization the judgment of some features RDMA/hns: Limit the length of data copied between kernel and userspace RDMA/mlx4: Remove bogus dev_base_lock usage RDMA/uverbs: Fix incorrect variable type RDMA/core: Do not indicate device ready when device enablement fails RDMA/core: Clean up cq pool mechanism RDMA/core: Update kernel documentation for ib_create_named_qp() MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address ...
2020-12-16Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds19-105/+324
Pull block driver updates from Jens Axboe: "Nothing major in here: - NVMe pull request from Christoph: - nvmet passthrough improvements (Chaitanya Kulkarni) - fcloop error injection support (James Smart) - read-only support for zoned namespaces without Zone Append (Javier González) - improve some error message (Minwoo Im) - reject I/O to offline fabrics namespaces (Victor Gladkov) - PCI queue allocation cleanups (Niklas Schnelle) - remove an unused allocation in nvmet (Amit Engel) - a Kconfig spelling fix (Colin Ian King) - nvme_req_qid simplication (Baolin Wang) - MD pull request from Song: - Fix race condition in md_ioctl() (Dae R. Jeong) - Initialize read_slot properly for raid10 (Kevin Vigor) - Code cleanup (Pankaj Gupta) - md-cluster resync/reshape fix (Zhao Heming) - Move null_blk into its own directory (Damien Le Moal) - null_blk zone and discard improvements (Damien Le Moal) - bcache race fix (Dongsheng Yang) - Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang, Lutz Pogrell, Md Haris Iqbal) - lightnvm NULL pointer deref fix (tangzhenhao) - sr in_interrupt() removal (Sebastian Andrzej Siewior) - FC endpoint security support for s390/dasd (Jan Höppner, Sebastian Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included as it made it easier for them to funnel the feature through the block driver tree. - Follow up fixes (Colin Ian King)" * tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits) block: drop dead assignments in loop_init() sr: Remove in_interrupt() usage in sr_init_command(). sr: Switch the sector size back to 2048 if sr_read_sector() changed it. cdrom: Reset sector_size back it is not 2048. drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c null_blk: Move driver into its own directory null_blk: Allow controlling max_hw_sectors limit null_blk: discard zones on reset null_blk: cleanup discard handling null_blk: Improve implicit zone close null_blk: improve zone locking block: Align max_hw_sectors to logical blocksize null_blk: Fail zone append to conventional zones null_blk: Fix zone size initialization bcache: fix race between setting bdev state to none and new write request direct to backing block/rnbd: fix a null pointer dereference on dev->blk_symlink_name block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name block/rnbd: call kobject_put in the failure path Documentation/ABI/rnbd-srv: add document for force_close block/rnbd-srv: close a mapped device from server side. ...
2020-12-16Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds4-28/+23
Pull block updates from Jens Axboe: "Another series of killing more code than what is being added, again thanks to Christoph's relentless cleanups and tech debt tackling. This contains: - blk-iocost improvements (Baolin Wang) - part0 iostat fix (Jeffle Xu) - Disable iopoll for split bios (Jeffle Xu) - block tracepoint cleanups (Christoph Hellwig) - Merging of struct block_device and hd_struct (Christoph Hellwig) - Rework/cleanup of how block device sizes are updated (Christoph Hellwig) - Simplification of gendisk lookup and removal of block device aliasing (Christoph Hellwig) - Block device ioctl cleanups (Christoph Hellwig) - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig) - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig) - sbitmap improvements (Pavel Begunkov) - Hybrid polling fix (Pavel Begunkov) - bvec iteration improvements (Pavel Begunkov) - Zone revalidation fixes (Damien Le Moal) - blk-throttle limit fix (Yu Kuai) - Various little fixes" * tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits) blk-mq: fix msec comment from micro to milli seconds blk-mq: update arg in comment of blk_mq_map_queue blk-mq: add helper allocating tagset->tags Revert "block: Fix a lockdep complaint triggered by request queue flushing" nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class blk-mq: add new API of blk_mq_hctx_set_fq_lock_class block: disable iopoll for split bio block: Improve blk_revalidate_disk_zones() checks sbitmap: simplify wrap check sbitmap: replace CAS with atomic and sbitmap: remove swap_lock sbitmap: optimise sbitmap_deferred_clear() blk-mq: skip hybrid polling if iopoll doesn't spin blk-iocost: Factor out the base vrate change into a separate function blk-iocost: Factor out the active iocgs' state check into a separate function blk-iocost: Move the usage ratio calculation to the correct place blk-iocost: Remove unnecessary advance declaration blk-iocost: Fix some typos in comments blktrace: fix up a kerneldoc comment block: remove the request_queue to argument request based tracepoints ...
2020-12-07nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock classMing Lei1-0/+10
Set nvme-loop's lock class via blk_mq_hctx_set_fq_lock_class for avoiding lockdep possible recursive locking, then we can remove the dynamically allocated lock class for each flush queue, finally we can avoid horrible SCSI probe delay. This way may not address situation in which one nvme-loop is backed on another nvme-loop. However, in reality, people seldom uses this way for test. Even though someone played in this way, it is just one recursive locking false positive, no real deadlock issue. Tested-by: Kashyap Desai <kashyap.desai@broadcom.com> Reported-by: Qian Cai <cai@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: John Garry <john.garry@huawei.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04block: remove the request_queue argument to the block_bio_remap tracepointChristoph Hellwig1-2/+1
The request_queue can trivially be derived from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: switch partition lookup to use struct block_deviceChristoph Hellwig1-10/+10
Use struct block_device to lookup partitions on a disk. This removes all usage of struct hd_struct from the I/O path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01nvme: export zoned namespaces without Zone Append support read-onlyJavier González3-5/+12
Allow ZNS NVMe SSDs to present a read-only namespace when append is not supported, instead of rejecting the namespace directly. This allows (i) the namespace to be used in read-only mode, which is not a problem as the append command only affects the write path, and (ii) to use standard management tools such as nvme-cli to choose a different format or firmware slot that is compatible with the Linux zoned block device. Signed-off-by: Javier González <javier.gonz@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme: rename bdev operationsJavier González1-4/+4
Remane block device operations in preparation to add char device file operations. Signed-off-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme: rename controller base dev_t char deviceJavier González1-5/+7
Rename controller base dev_t char device in preparation for adding a namespace char device. Signed-off-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme: remove unnecessary return valuesJavier González1-5/+3
Cleanup unnecessary ret values that are not checked or used in nvme_alloc_ns(). Signed-off-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme: print a warning for when listing active namespaces failsMinwoo Im1-1/+4
During the scan_work, an Identify command is issued to figure out which namespaces are active. If this command fails, the nvme driver falls back to scanning namespaces sequentially. In this situation, we don't see any warnings and don't even know whether list-ns command has been failed or not easiliy. Printa warning when the Identify command executin fail: [ 1.108399] nvme nvme0: Identify NS List failed (status=0x400b) [ 1.109583] nvme0n1: detected capacity change from 0 to 1048576 [ 1.112186] nvme nvme0: Identify Descriptors failed (nsid=2, status=0x4002) [ 1.113929] nvme nvme0: Identify Descriptors failed (nsid=3, status=0x4002) [ 1.116537] nvme nvme0: Identify Descriptors failed (nsid=4, status=0x4002) ... Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme: improve an error message on Identify failureMinwoo Im1-1/+2
Add the namespace ID to the error message when the Identify command used to retrieve the Namespace Identification Descriptor list fails. This avoids rather useless and duplicative messages like the following: [ 1.321031] nvme nvme0: Identify Descriptors failed (16386) [ 1.321948] nvme nvme0: Identify Descriptors failed (16386) [ 1.322872] nvme nvme0: Identify Descriptors failed (16386) [ 1.323775] nvme nvme0: Identify Descriptors failed (16386) [ 1.324687] nvme nvme0: Identify Descriptors failed (16386) ... Also, print the nvme status code in hexadecimal rather than decimal format rather for better readability. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme-fabrics: reject I/O to offline deviceVictor Gladkov5-4/+77
Commands get stuck while Host NVMe-oF controller is in reconnect state. The controller enters into reconnect state when it loses connection with the target. It tries to reconnect every 10 seconds (default) until a successful reconnect or until the reconnect time-out is reached. The default reconnect time out is 10 minutes. Applications are expecting commands to complete with success or error within a certain timeout (30 seconds by default). The NVMe host is enforcing that timeout while it is connected, but during reconnect the timeout is not enforced and commands may get stuck for a long period or even forever. To fix this long delay due to the default timeout, introduce new "fast_io_fail_tmo" session parameter. The timeout is measured in seconds from the controller reconnect and any command beyond that timeout is rejected. The new parameter value may be passed during 'connect'. The default value of -1 means no timeout (similar to current behavior). Signed-off-by: Victor Gladkov <victor.gladkov@kioxia.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvmet: fix a spelling mistake "incuding" -> "including" in KconfigColin Ian King1-1/+1
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvmet: make sure discovery change log event is protectedMax Gurtovoy1-0/+1
Generation counter is protected by nvmet_config_sem. Make sure the callers that call functions that might change it, are calling it properly. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvmet: remove unused ctrl->cqsAmit2-14/+2
remove unused cqs from nvmet_ctrl struct this will reduce the allocated memory. Signed-off-by: Amit <amit.engel@dell.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme-pci: don't allocate unused I/O queuesNiklas Schnelle1-9/+7
currently the NVME_QUIRK_SHARED_TAGS quirk for Apple devices is handled during the assignment of nr_io_queues in nvme_setup_io_queues(). This however means that for these devices nvme_max_io_queues() will actually not return the supported maximum which is confusing and unexpected and also means that in nvme_probe() we are allocating for I/O queues that will never be used. Fix this by moving the quirk handling into nvme_max_io_queues(). Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme-pci: drop min() from nr_io_queues assignmentNiklas Schnelle1-2/+1
in nvme_setup_io_queues() the number of I/O queues is set to either 1 in case of a quirky Apple device or to the min of nvme_max_io_queues() or dev->nr_allocated_queues - 1. This is unnecessarily complicated as dev->nr_allocated_queues is only assigned once and is nvme_max_io_queues() + 1. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvmet: use inline bio for passthru fast pathChaitanya Kulkarni2-3/+10
In nvmet_passthru_execute_cmd() which is a high frequency function it uses bio_alloc() which leads to memory allocation from the fs pool for each I/O. For NVMeoF nvmet_req we already have inline_bvec allocated as a part of request allocation that can be used with preallocated bio when we already know the size of request before bio allocation with bio_alloc(), which we already do. Introduce a bio member for the nvmet_req passthru anon union. In the fast path, check if we can get away with inline bvec and bio from nvmet_req with bio_init() call before actually allocating from the bio_alloc(). This will be useful to avoid any new memory allocation under high memory pressure situation and get rid of any extra work of allocation (bio_alloc()) vs initialization (bio_init()) when transfer len is < NVMET_MAX_INLINE_DATA_LEN that user can configure at compile time. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvmet: use blk_rq_bio_prep instead of blk_rq_append_bioChaitanya Kulkarni1-6/+2
The function blk_rq_append_bio() is a genereric API written for all types driver (having bounce buffers) and different context (where request is already having a bio i.e. rq->bio != NULL). It does mainly three things: calculating the segments, bounce queue and if req->bio == NULL call blk_rq_bio_prep() or handle low level merge() case. The NVMe PCIe and fabrics transports currently does not use queue bounce mechanism. In order to find this for each request processing in the passthru blk_rq_append_bio() does extra work in the fast path for each request. When I ran I/Os with different block sizes on the passthru controller I found that we can reuse the req->sg_cnt instead of iterating over the bvecs to find out nr_segs in blk_rq_append_bio(). This calculation in blk_rq_append_bio() is a duplication of work given that we have the value in req->sg_cnt. (correct me here if I'm wrong). With NVMe passthru request based driver we allocate fresh request each time, so every call to blk_rq_append_bio() rq->bio will be NULL i.e. we don't really need the second condition in the blk_rq_append_bio() and the resulting error condition in the caller of blk_rq_append_bio(). So for NVMeOF passthru driver recalculating the segments, bounce check and ll_back_merge code is not needed such that we can get away with the minimal version of the blk_rq_append_bio() which removes the error check in the fast path along with extra variable in nvmet_passthru_map_sg(). This patch updates the nvmet_passthru_map_sg() such that it does only appending the bio to the request in the context of the NVMeOF Passthru driver. Following are perf numbers :- With current implementation (blk_rq_append_bio()) :- ---------------------------------------------------- + 5.80% 0.02% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd + 5.44% 0.01% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd + 4.88% 0.00% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd + 5.44% 0.01% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd + 4.86% 0.01% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd + 5.17% 0.00% kworker/0:2-eve [nvmet] [k] nvmet_passthru_execute_cmd With this patch using blk_rq_bio_prep() :- ---------------------------------------------------- + 3.14% 0.02% kworker/0:2-eve [nvmet] [k] nvmet_passthru_execute_cmd + 3.26% 0.01% kworker/0:2-eve [nvmet] [k] nvmet_passthru_execute_cmd + 5.37% 0.01% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd + 5.18% 0.02% kworker/0:2-eve [nvmet] [k] nvmet_passthru_execute_cmd + 4.84% 0.02% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd + 4.87% 0.01% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvmet: remove op_flags for passthru commandsChaitanya Kulkarni1-7/+1
For passthru commands setting op_flags has no meaning. Remove the code that sets the op flags in nvmet_passthru_map_sg(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme: split nvme_alloc_request()Chaitanya Kulkarni5-23/+42
Right now nvme_alloc_request() allocates a request from block layer based on the value of the qid. When qid set to NVME_QID_ANY it used blk_mq_alloc_request() else blk_mq_alloc_request_hctx(). The function nvme_alloc_request() is called from different context, The only place where it uses non NVME_QID_ANY value is for fabrics connect commands :- nvme_submit_sync_cmd() NVME_QID_ANY nvme_features() NVME_QID_ANY nvme_sec_submit() NVME_QID_ANY nvmf_reg_read32() NVME_QID_ANY nvmf_reg_read64() NVME_QID_ANY nvmf_reg_write32() NVME_QID_ANY nvmf_connect_admin_queue() NVME_QID_ANY nvme_submit_user_cmd() NVME_QID_ANY nvme_alloc_request() nvme_keep_alive() NVME_QID_ANY nvme_alloc_request() nvme_timeout() NVME_QID_ANY nvme_alloc_request() nvme_delete_queue() NVME_QID_ANY nvme_alloc_request() nvmet_passthru_execute_cmd() NVME_QID_ANY nvme_alloc_request() nvmf_connect_io_queue() QID __nvme_submit_sync_cmd() nvme_alloc_request() With passthru nvme_alloc_request() now falls into the I/O fast path such that blk_mq_alloc_request_hctx() is never gets called and that adds additional branch check in fast path. Split the nvme_alloc_request() into nvme_alloc_request() and nvme_alloc_request_qid(). Replace each call of the nvme_alloc_request() with NVME_QID_ANY param with a call to newly added nvme_alloc_request() without NVME_QID_ANY. Replace a call to nvme_alloc_request() with QID param with a call to newly added nvme_alloc_request() and nvme_alloc_request_qid() based on the qid value set in the __nvme_submit_sync_cmd(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvmet: add passthru io timeout value attrChaitanya Kulkarni3-1/+23
NVMeOF controller in the passsthru mode is capable of handling wide set of I/O commands including vender specific passhtru io comands. The vendor specific I/O commands are used to read the large drive logs and can take longer than default NVMe commands, i.e. for passthru requests the timeout value may differ from the passthru controller's default timeout values (nvme-core:io_timeout). Add a configfs attribute so that user can set the io timeout values. In case if this configfs value is not set nvme_alloc_request() will set the NVME_IO_TIMEOUT value when request queuedata is NULL. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvmet: add passthru admin timeout value attrChaitanya Kulkarni3-0/+27
NVMeOF controller in the passsthru mode is capable of handling wide set of admin commands including vender specific passhtru admin comands. The vendor specific admin commands are used to read the large drive logs and can take longer than default NVMe commands, i.e. for passthru requests the timeout value may differ from the passthru controller's default timeout values (nvme-core:admin_timeout). Add a configfs attribute so that user can set the admin timeout values. In case if this configfs value is not set nvme_alloc_request() will set the ADMIN_TIMEOUT value when request queuedata is NULL. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme: use consistent macro name for timeoutChaitanya Kulkarni7-10/+10
This is purely a clenaup patch, add prefix NVME to the ADMIN_TIMEOUT to make consistent with NVME_IO_TIMEOUT. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme: centralize setting the timeout in nvme_alloc_requestChaitanya Kulkarni3-5/+11
The function nvme_alloc_request() is called from different context (I/O and Admin queue) where callers do not consider the I/O timeout when called from I/O queue context. Update nvme_alloc_request() to set the default I/O and Admin timeout value based on whether the queuedata is set or not. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme: simplify nvme_req_qid()Baolin Wang1-1/+2
Use the request's '->mq_hctx->queue_num' directly to simplify the nvme_req_qid() function. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01nvme-fcloop: add sysfs attribute to inject command dropJames Smart1-2/+79
Add sysfs attribute to specify parameters for dropping a command. The attribute takes a string of: <opcode>:<starting a what instance>:<number of times> Opcode is formatted as lower 8 bits are opcode. If a fabrics opcode, a bit above bits 7:0 will be set. Once set, each sqe is looked at. If the opcode matches the running instance count is updated. If the instance count is in the range of where to drop (based on starting and # of times), then drop the command by not passing it to the target layer. Signed-off-by: James Smart <james.smart@broadcom.com>
2020-11-23Merge tag 'v5.10-rc5' into rdma.git for-nextJason Gunthorpe3-15/+33
For dependencies in following patches Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-17RDMA/core: remove use of dma_virt_opsChristoph Hellwig1-1/+2
Use the ib_dma_* helpers to skip the DMA translation instead. This removes the last user if dma_virt_ops and keeps the weird layering violation inside the RDMA core instead of burderning the DMA mapping subsystems with it. This also means the software RDMA drivers now don't have to mess with DMA parameters that are not relevant to them at all, and that in the future we can use PCI P2P transfers even for software RDMA, as there is no first fake layer of DMA mapping that the P2P DMA support. Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-17Merge branch 'for-rc' into rdma.gitJason Gunthorpe8-209/+162
From https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git The rc RDMA branch is needed due to dependencies on the next patches. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>