summaryrefslogtreecommitdiffstats
path: root/drivers/nvme
AgeCommit message (Collapse)AuthorFilesLines
2018-04-05Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-blockLinus Torvalds16-342/+975
Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...
2018-03-29lightnvm: remove function name in stringsMatias Bjørling1-6/+6
For the sysfs functions, the function names are embedded into their error strings. If the function name later changes, the string may not be updated accordingly. Update the strings to use __func__ to avoid this. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: implement get log report chunk helpersJavier González2-2/+76
The 2.0 spec provides a report chunk log page that can be retrieved using the stangard nvme get log page. This replaces the dedicated get/put bad block table in 1.2. This patch implements the helper functions to allow targets retrieve the chunk metadata using get log page. It makes nvme_get_log_ext available outside of nvme core so that we can use it form lightnvm. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: normalize geometry nomenclatureJavier González1-27/+27
Normalize nomenclature for naming channels, luns, chunks, planes and sectors as well as derivations in order to improve readability. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: complete geo structure with maxoc*Javier González1-0/+17
Complete the generic geometry structure with the maxoc and maxocpu felds, present in the 2.0 spec. Also, expose them through sysfs. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: add shorten OCSSD version in geoJavier González1-0/+6
Create a shorten version to use in the generic geometry. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: add minor version to generic geometryJavier González1-5/+20
Separate the version between major and minor on the generic geometry and represent it through sysfs in the 2.0 path. The 1.2 path only shows the major version to preserve the existing user space interface. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: simplify geometry structureJavier González1-138/+199
Currently, the device geometry is stored redundantly in the nvm_id and nvm_geo structures at a device level. Moreover, when instantiating targets on a specific number of LUNs, these structures are replicated and manually modified to fit the instance channel and LUN partitioning. Instead, create a generic geometry around nvm_geo, which can be used by (i) the underlying device to describe the geometry of the whole device, and (ii) instances to describe their geometry independently. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29nvme: lightnvm: add late setup of block size and metadataMatias Bjørling3-0/+12
The nvme driver sets up the size of the nvme namespace in two steps. First it initializes the device with standard logical block and metadata sizes, and then sets the correct logical block and metadata size. Due to the OCSSD 2.0 specification relies on the namespace to expose these sizes for correct initialization, let it be updated appropriately on the LightNVM side as well. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: remove nvm_dev_ops->max_phys_sectMatias Bjørling1-4/+1
The value of max_phys_sect is always static. Instead of defining it in the nvm_dev_ops structure, declare it as a global value. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: add 2.0 geometry identificationMatias Bjørling1-49/+289
Implement the geometry data structures for 2.0 and enable a drive to be identified as one, including exposing the appropriate 2.0 sysfs entries. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: flatten nvm_id_group into nvm_idMatias Bjørling1-55/+51
There are no groups in the 2.0 specification, make sure that the nvm_id structure is flattened before 2.0 data structures are added. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: make 1.2 data structures explicitMatias Bjørling1-41/+41
Make the 1.2 data structures explicit, so it will be easy to identify the 2.0 data structures. Also fix the order of which the nvme_nvm_* are declared, such that they follow the nvme_nvm_command order. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: remove multiple groups in 1.2 data structureMatias Bjørling1-2/+3
Only one id group from the 1.2 specification is supported. Make sure that only the first group is accessible. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: remove mlc pairs structureMatias Bjørling1-13/+1
The known implementations of the 1.2 specification, and upcoming 2.0 implementation all expose a sequential list of pages to write. Remove the data structure, as it is no longer needed. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: remove chnl_offset in nvme_nvm_identityMatias Bjørling1-3/+1
The identity structure is initialized to zero in the beginning of the nvme_nvm_identity function. The chnl_offset is separately set to zero. Since both the variable and assignment is never changed, remove them. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-27blk-mq: Allow PCI vector offset for mapping queuesKeith Busch1-1/+1
The PCI interrupt vectors intended to be associated with a queue may not start at 0; a driver may allocate pre_vectors for special use. This patch adds an offset parameter so blk-mq may find the intended affinity mask and updates all drivers using this API accordingly. Cc: Don Brace <don.brace@microsemi.com> Cc: <qla2xxx-upstream@qlogic.com> Cc: <linux-scsi@vger.kernel.org> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme: make nvme_get_log_ext non-staticMatias Bjørling2-1/+4
Enable the lightnvm integration to use the nvme_get_log_ext() function. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvmet: constify struct nvmet_fabrics_opsChristoph Hellwig5-17/+17
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvmet: refactor configfs transport type handlingChristoph Hellwig1-32/+29
Have a common table of mappings from numerical transport ids to names, and zero the transport specific area in common code in nvmet_addr_trtype_store. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvmet: move device_uuid configfs attr definition to suitable placeMax Gurtovoy1-2/+2
Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme: Add .stop_ctrl to nvme ctrl opsNitzan Carmi3-3/+12
For consistancy reasons, any fabric-specific works (e.g error recovery/reconnect) should be canceled in nvme_stop_ctrl, as for all other NVMe pending works (e.g. scan, keep alive). The patch aims to simplify the logic of the code, as we now only rely on a vague demand from any fabric to flush its private workqueues at the beginning of .delete_ctrl op. Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme-rdma: Allow DELETING state change failure in error_recoveryNitzan Carmi1-2/+2
While error recovery is ongoing, it is OK to move ctrl to DELETING state (from concurrent delete_work). Thus we don't need a warning for that case. Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme: Skip checking heads without namespacesKeith Busch1-0/+1
If a task is holding a reference to a namespace on a removed controller, the head will not be released. If the same controller is added again later, its namespaces may not be successfully added. Instead, the user will see kernel message "Duplicate IDs for nsid <X>". This patch fixes that by skipping heads that don't have namespaces when considering if a new namespace is safe to add. Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com> Cc: stable@vger.kernel.org Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme-rdma: Don't flush delete_wq by default during remove_oneMax Gurtovoy1-0/+14
The .remove_one function is called for any ib_device removal. In case the removed device has no reference in our driver, there is no need to flush the work queue. Reviewed-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvmet-rdma: Don't flush system_wq by default during remove_oneMax Gurtovoy1-1/+18
The .remove_one function is called for any ib_device removal. In case the removed device has no reference in our driver, there is no need to flush the system work queue. Reviewed-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvmet-rdma: Fix use after free in nvmet_rdma_cm_handler()Israel Rukshin1-16/+11
We free nvmet rdma queues while handling rdma_cm events. In order to avoid this we destroy the qp and the queue after destroying the cm_id which guarantees that all rdma_cm events are done. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvmet-rdma: Remove unused queue stateIsrael Rukshin1-5/+1
Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvmet_fc: prevent new io rqsts in possible isr completionsJames Smart1-3/+16
When a bio completion calls back into the transport for a back-end io device, the request completion path can free the transport io job structure allowing it to be reused for other operations. The transport has a defer_rcv queue which holds temporary cmd rcv ops while waitng for io job structures. when the job frees, if there's a cmd waiting, it is picked up and submitted for processing, which can call back out to the bio path if it's a read. Unfortunately, what is unknown is the context of the original bio done call, and it may be in a state (softirq) that is not compatible with submitting the new bio in the same calling sequence. This is especially true when using scsi back-end devices as scsi is in softirq when it makes the done call. Correct by scheduling the io to be started via workq rather than calling the start new io path inline to the original bio done path. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme_fc: on remoteport reuse, set new nport_id and role.James Smart1-0/+2
When reattaching to a removed remoteport that has not yet been fully deleted as it's waiting for reconnect timeouts, be sure to re-set the ports nport id and role. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme_fc: fix abort race on teardown with lld rejectJames Smart1-1/+4
Another abort race: An io request is started, becomes active, and is attempted to be started with the lldd. At the same time the controller is stopped/torndown and an itterator is run to abort the ios. As the io is active, it is added to the outstanding aborted io count. However on the original io request thread, the driver ends up rejecting the io due to the condition that induced the controller teardown. The driver reject path didn't check whether it was in the outstanding io count. This left the count outstanding stopping controller teardown. Correct by, in the driver reject case, setting the state to inactive and checking whether it was in the outstanding io count. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme_fc: io timeout should defer abort to ctrl resetJames Smart1-11/+1
The current nvme_fc code, when an io times out, will abort the io on the fc link, then call the error recovery routine to reset the controller. It is during the reset of the controller that the transport will wait for all ios to be aborted before sending a Disconnect LS to the target. However, the reset routine only waits for the io which it generates the abort for to complete. Any io that was aborted just prior to the reset isn't in it's list to wait for. Thus the Disconnect is getting sent before the aborts have completed. Correct by removing the abort in the timeout handler. The reset will generate the abort. At that point the timeout handler can be simplified to request the reset (via the error handler) and restart the timeout timer. Also fixes a small typo in a comment in the reset handler. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme_fc: fix ctrl create failures racing with workq itemsJames Smart1-0/+4
If there are errors during initial controller create, the transport will teardown the partially initialized controller struct and free the ctlr memory. Trouble is - most of those errors can occur due to asynchronous events happening such io timeouts and subsystem connectivity failures. Those failures invoke async workq items to reset the controller and attempt reconnect. Those may be in progress as the main thread frees the ctrl memory, resulting in NULL ptr oops. Prevent this from happening by having the main ctrl failure thread changing state to DELETING followed by synchronously cancelling any pending queued work item. The change of state will prevent the scheduling of resets or reconnect events. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme-pci: disable APST for Samsung NVMe SSD 960 EVO + ASUS PRIME Z370-AJarosław Janik1-2/+5
Yet another "incompatible" Samsung NVMe SSD 960 EVO and Asus motherboard combination. 960 EVO device disappears from PCIe bus within few minutes after boot-up when APST is in use and never gets back. Forcing NVME_QUIRK_NO_APST is the only way to make this drive work with this particular motherboard. NVME_QUIRK_NO_DEEPEST_PS doesn't work, upgrading motherboard's BIOS didn't help either. Since this is a desktop motherboard, the only drawback of not using APST is increased device temperature. Signed-off-by: Jarosław Janik <jaroslaw.janik@gmail.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme: centralize ctrl removal printsMax Gurtovoy3-12/+8
nvme_delete_ctrl can be called from various contexts in parallel, and cause duplicated information prints, even though the specific context doesn't perform the actual removal. Instead, print the information when the actual removal occurs. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme-pci: Add .get_address ctrl callbackKeith Busch1-0/+8
The nvme-fabrics exports the controller address to sysfs, and we'd like to have parity with this feature for PCIe. This patch provides the appropiate callback and returns the controller address as the pci domain:bus:device.function. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme: implement log page low/high offset and dwordsMatias Bjørling1-10/+22
NVMe 1.2.1 extends the get log page interface to include 64 bit offset and increases the number of dwords to 32 bits. Implement for future use. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme: change namespaces_mutext to namespaces_rwsemJianchao Wang3-35/+35
namespaces_mutext is used to synchronize the operations on ctrl namespaces list. Most of the time, it is a read operation. On the other hand, there are many interfaces in nvme core that need this lock, such as nvme_wait_freeze, and even more interfaces will be added. If we use mutex here, circular dependency could be introduced easily. For example: context A context B nvme_xxx nvme_xxx hold namespaces_mutext require namespaces_mutext sync context B So it is better to change it from mutex to rwsem. Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme: fix the dangerous reference of namespaces listJianchao Wang1-2/+14
nvme_remove_namespaces and nvme_remove_invalid_namespaces reference the ctrl->namespaces list w/o holding namespaces_mutext. It is ok to invoke nvme_ns_remove there, but what if there is others. To be safer, reference the ctrl->namespaces list under namespaces_mutext. Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme-pci: quiesce IO queues prior to disabling device HMB accessesJianchao Wang1-5/+4
Quiesce IO queues prior to disabling device HMB accesses. A controller using HMB may relay on it to efficiently complete IO commands. Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme: Add fault injection featureThomas Tai4-0/+109
Linux's fault injection framework provides a systematic way to support error injection via debugfs in the /sys/kernel/debug directory. This patch uses the framework to add error injection to NVMe driver. The fault injection source code is stored in a separate file and only linked if CONFIG_FAULT_INJECTION_DEBUG_FS kernel config is selected. Once the error injection is enabled, NVME_SC_INVALID_OPCODE with no retry will be injected into the nvme_end_request. Users can change the default status code and no retry flag via debufs. Following example shows how to enable and inject an error. For more examples, refer to Documentation/fault-injection/nvme-fault-injection.txt How to enable nvme fault injection: First, enable CONFIG_FAULT_INJECTION_DEBUG_FS kernel config, recompile the kernel. After booting up the kernel, do the following. How to inject an error: mount /dev/nvme0n1 /mnt echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability cp a.file /mnt Expected Result: cp: cannot stat ‘/mnt/a.file’: Input/output error Message from dmesg: FAULT_INJECTION: forcing a failure. name fault_inject, interval 1, probability 100, space 0, times 1 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc8+ #2 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: <IRQ> dump_stack+0x5c/0x7d should_fail+0x148/0x170 nvme_should_fail+0x2f/0x50 [nvme_core] nvme_process_cq+0xe7/0x1d0 [nvme] nvme_irq+0x1e/0x40 [nvme] __handle_irq_event_percpu+0x3a/0x190 handle_irq_event_percpu+0x30/0x70 handle_irq_event+0x36/0x60 handle_fasteoi_irq+0x78/0x120 handle_irq+0xa7/0x130 ? tick_irq_enter+0xa8/0xc0 do_IRQ+0x43/0xc0 common_interrupt+0xa2/0xa2 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 RSP: 0018:ffffffff82003e90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd RAX: ffffffff817a10c0 RBX: ffffffff82012480 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 000000008e38ce64 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82012480 R13: ffffffff82012480 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x4/0x4 default_idle+0x18/0xf0 do_idle+0x150/0x1d0 cpu_startup_entry+0x6f/0x80 start_kernel+0x4c4/0x4e4 ? set_init_arg+0x55/0x55 secondary_startup_64+0xa5/0xb0 print_req_error: I/O error, dev nvme0n1, sector 9240 EXT4-fs error (device nvme0n1): ext4_find_entry:1436: inode #2: comm cp: reading directory lblock 0 Signed-off-by: Thomas Tai <thomas.tai@oracle.com> Reviewed-by: Eric Saint-Etienne <eric.saint.etienne@oracle.com> Signed-off-by: Karl Volz <karl.volz@oracle.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvme: use define instead of magic value for identify sizeMinwoo Im1-2/+3
NVME_IDENTIFY_DATA_SIZE was added to linux/nvme.h by following commit. commit 0add5e8e588c ("nvmet: use NVME_IDENTIFY_DATA_SIZE") Make it use NVME_IDENTIFY_DATA_SIZE define instead of magic value 0x1000 in case of identify data size. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvmet: don't return "any" ip address in discovery log pageSagi Grimberg3-3/+47
Its perfectly valid to assign a nvmet port to listen on "any" IP address (traddr 0.0.0.0 for ipv4 address family) for IP based transport ports. However, we must not return this address in discovery log entries. Instead we need to return the address where the request was accepted on (req->port address). Since this is nvme transport specific, introduce an optional .disc_traddr interface that is designed to check that a port in question is bound to "any" IP address and if so, set the traddr from the port where the request came from. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-08block: Use blk_queue_flag_*() in drivers instead of queue_flag_*()Bart Van Assche2-3/+3
This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-08nvme_fc: rework sqsize handlingJames Smart1-10/+17
Corrected four outstanding issues in the transport around sqsize. 1: Create Connection LS is sending the 1's-based sqsize, should be sending the 0's-based value. 2: allocation of hw queue is using the 0's-base size. It should be using the 1's-based value. 3: normalization of ctrl.sqsize by MQES is using MQES+1 (1's-based value). It should be MQES (0's-based value). 4: Missing clause to ensure queue_count not larger than ctrl->sqsize. Corrected by: Clean up routines that pass queue size around. The queue size value is the actual count (1's-based) value and determined from ctrl->sqsize + 1. Routines that send 0's-based value adapt from queue size. Sset ctrl->sqsize properly for MQES. Added clause to nsure queue_count not larger than ctrl->sqsize + 1. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-03-08nvme-fabrics: Ignore nr_io_queues option for discovery controllersRoland Dreier1-0/+5
This removes a dependency on the order options are passed when creating a fabrics controller. With the old code, if "nr_io_queues" appears before an "nqn" option specifying the discovery controller, then nr_io_queues is overridden with zero. If "nr_io_queues" appears after specifying the discovery controller, then the nr_io_queues option is used to set the number of queues, and the driver attempts to establish IO connections to the discovery controller (which doesn't work). It seems better to ignore (and warn about) the "nr_io_queues" option if userspace has already asked to connect to the discovery controller. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-03-07Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers"Christoph Hellwig3-40/+0
This reverts commit e9a48034d7d1318ece7d4a235838a86c94db9d68. The slaves and holders link for the hidden gendisks confuse lsblk so that it errors out on, or doesn't report the nvme multipath devices. Given that we don't need holder relationships for something that can't even be directly accessed we should just stop creating those links. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Potnuri Bharat Teja <bharat@chelsio.com> Cc: stable@vger.kernel.org Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-03-01nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectorsMing Lei1-1/+1
84676c1f21 ("genirq/affinity: assign vectors to all possible CPUs") has switched to do irq vectors spread among all possible CPUs, so pass num_possible_cpus() as max vecotrs to be assigned. For example, in a 8 cores system, 0~3 online, 4~8 offline/not present, see 'lscpu': [ming@box]$lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 2 NUMA node(s): 2 ... NUMA node0 CPU(s): 0-3 NUMA node1 CPU(s): ... 1) before this patch, follows the allocated vectors and their affinity: irq 47, cpu list 0,4 irq 48, cpu list 1,6 irq 49, cpu list 2,5 irq 50, cpu list 3,7 2) after this patch, follows the allocated vectors and their affinity: irq 43, cpu list 0 irq 44, cpu list 1 irq 45, cpu list 2 irq 46, cpu list 3 irq 47, cpu list 4 irq 48, cpu list 6 irq 49, cpu list 5 irq 50, cpu list 7 Cc: Keith Busch <keith.busch@intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-03-01nvme-pci: Fix EEH failure on ppcWen Xiong1-6/+7
Triggering PPC EEH detection and handling requires a memory mapped read failure. The NVMe driver removed the periodic health check MMIO, so there's no early detection mechanism to trigger the recovery. Instead, the detection now happens when the nvme driver handles an IO timeout event. This takes the pci channel offline, so we do not want the driver to proceed with escalating its own recovery efforts that may conflict with the EEH handler. This patch ensures the driver will observe the channel was set to offline after a failed MMIO read and resets the IO timer so the EEH handler has a chance to recover the device. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> [updated change log] Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-02-28block: Add 'lock' as third argument to blk_alloc_queue_node()Bart Van Assche1-1/+1
This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-09 02:04:17 +0000