summaryrefslogtreecommitdiffstats
path: root/drivers/nvme/target/discovery.c
AgeCommit message (Collapse)AuthorFilesLines
2018-12-13nvmet: add error log support for fabrics-cmdChaitanya Kulkarni1-0/+10
This patch adds the support to maintain error log page for the fabrics prop get, prop set, and admin connect commands. Here we also update the discovery.c and add update set/get features and parse functions to support error log page. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-13nvme: remove nvme_common command cdw10 arrayChaitanya Kulkarni1-2/+2
This is a preparation patch which removes the nvme common command cdw10 array and replace with individual fields. This is needed for the nvmet error log page implementation make is error log page entry offset assignment easier. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-07nvmet: mark nvmet_genctr staticChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07nvmet: enable Discovery Controller AENsJay Sternberg1-3/+65
Add functions to find connections requesting Discovery Change events and send a notification to hosts that maintain an explicit persistent connection and have and active Asynchronous Event Request pending. Only Hosts that have access to the Subsystem effected by the change will receive notifications of Discovery Change event. Call these functions each time there is a configfs change that effects the Discover Log Pages. Set the OAES field in the Identify Controller response to advertise the support for Asynchronous Event Notifications. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Reviewed-by: Phil Cayton <phil.cayton@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07nvmet: allow host connect even if no allowed subsystems are exportedSagi Grimberg1-1/+1
It is perfectly valid that a host connects to a discovery subsystem and gets an empty discovery log page since no subsystems are provisioned to it. No reason to disallow connecting to the discovery subsystem all together. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Jay Sternberg <jay.e.sternberg@intel.com> Reviewed-by: Phil Cayton <phil.cayton@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07nvmet: add support to Discovery controllers for commandsJay Sternberg1-0/+53
Add custom get/set features to commands allowed by Discovery controllers. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07nvmet: allow Keep Alive for Discovery controllerJay Sternberg1-0/+4
Per change to specification allowing Discovery controllers to have explicit persistent connections, remove restriction on Discovery controllers allowing kato on connect. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-17nvmet: use strlcpy() instead of strcpy()Bart Van Assche1-1/+1
Although the code modified by this patch looks fine to me, this patch avoids that Coverity reports the following complaint (ID 1364971 and ID 1364973): "You might overrun the 256-character fixed-size string id->subnqn". Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-10-17nvmet: remove unreachable codeChaitanya Kulkarni1-3/+1
Get rid of the unreachable code in the nvmet_parse_discovery_cmd(). Keep the error message identical to the admin-cmd.c and io-cmd*.c Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-23nvmet-rdma: support max(16KB, PAGE_SIZE) inline dataSteve Wise1-1/+1
The patch enables inline data sizes using up to 4 recv sges, and capping the size at 16KB or at least 1 page size. So on a 4K page system, up to 16KB is supported, and for a 64K page system 1 page of 64KB is supported. We avoid > 0 order page allocations for the inline buffers by using multiple recv sges, one for each page. If the device cannot support the configured inline data size due to lack of enough recv sges, then log a warning and reduce the inline size. Add a new configfs port attribute, called param_inline_data_size, to allow configuring the size of inline data for a given nvmf port. The maximum size allowed is still enforced by nvmet-rdma with NVMET_RDMA_MAX_INLINE_DATA_SIZE, which is now max(16KB, PAGE_SIZE). And the default size, if not specified via configfs, is still PAGE_SIZE. This preserves the existing behavior, but allows larger inline sizes for small page systems. If the configured inline data size exceeds NVMET_RDMA_MAX_INLINE_DATA_SIZE, a warning is logged and the size is reduced. If param_inline_data_size is set to 0, then inline data is disabled for that nvmf port. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvmet: remove duplicate NULL initialization for req->nsChaitanya Kulkarni1-2/+0
Remove the duplicate NULL initialization for req->ns. req->ns is always initialized to NULL in nvmet_req_init(), so there is no need to reset it later on failures unless we have previously assigned a value to it. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-12nvme: target: fix buffer overflowArnd Bergmann1-1/+1
nvmet_execute_get_disc_log_page() passes a fixed-length string into nvmet_format_discovery_entry(), which then does a longer memcpy() on it, as pointed out by gcc-8: In function 'nvmet_format_discovery_entry', inlined from 'nvmet_execute_get_disc_log_page' at drivers/nvme/target/discovery.c:126:4: drivers/nvme/target/discovery.c:62:2: error: 'memcpy' forming offset [38, 223] is out of the bounds [0, 37] [-Werror=array-bounds] memcpy(e->subnqn, subsys_nqn, NVMF_NQN_SIZE); Using strncpy() will make this well-defined, filling the rest of the buffer with zeroes, under the assumption that the input is either a NUL-terminated string, or a byte sequence containing no zeroes. If the input is a string that is longer than NVMF_NQN_SIZE, we continue to have no NUL-termination in the output. Fixes: a07b4970f464 ("nvmet: add a generic NVMe target") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26nvmet: don't return "any" ip address in discovery log pageSagi Grimberg1-3/+27
Its perfectly valid to assign a nvmet port to listen on "any" IP address (traddr 0.0.0.0 for ipv4 address family) for IP based transport ports. However, we must not return this address in discovery log entries. Instead we need to return the address where the request was accepted on (req->port address). Since this is nvme transport specific, introduce an optional .disc_traddr interface that is designed to check that a port in question is bound to "any" IP address and if so, set the traddr from the port where the request came from. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28nvme: use a single NVME_AQ_DEPTH and relax it to 32Sagi Grimberg1-1/+1
No need to differentiate fabrics from pci/loop, also lower it to 32 as we don't really need 256 inflight admin commands. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-15nvmet: use NVME_IDENTIFY_DATA_SIZEJohannes Thumshirn1-1/+1
Use NVME_IDENTIFY_DATA_SIZE define instead of hard coding the magic 4096 value. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.com> [hch: converted three more users] Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-04nvmet: Introduced helper routine for controller status check.Parav Pandit1-1/+1
This patch introduces helper function for checking controller status during admin and io command processing which returns u16 status. As to bring consistency on returning status, other friend functions also now return u16 status instead of int to match the spec. As part of the theseerror log prints in also prints qid on which command error occured. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvmet: Fixed avoided printing nvmet: twice in error logs.Parav Pandit1-9/+8
This patch avoids printing "nvmet:" twice in error logs as its already coming through pr_fmt macro. Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme: Use CNS as 8-bit field and avoid endianness conversionParav Pandit1-2/+2
This patch defines CNS field as 8-bit field and avoids cpu_to/from_le conversions. Also initialize nvme_command cns value explicitly to NVME_ID_CNS_NS for readability (don't rely on the fact that NVME_ID_CNS_NS = 0). Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-19nvmet: use symbolic constants for CNS valuesChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-19nvme.h: resync with nvme-cliChristoph Hellwig1-1/+1
Import a few updates to nvme.h from nvme-cli. This mostly includes a few new fields and error codes, but also a few renames that so far are only used in user space. Also one field is moved from an array of two le64 values to one of 16 u8 values so that we can more easily access it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05nvmet: add a generic NVMe targetChristoph Hellwig1-0/+221
This patch introduces a implementation of NVMe subsystems, controllers and discovery service which allows to export NVMe namespaces across fabrics such as Ethernet, FC etc. The implementation conforms to the NVMe 1.2.1 specification and interoperates with NVMe over fabrics host implementations. Configuration works using configfs, and is best performed using the nvmetcli tool from http://git.infradead.org/users/hch/nvmetcli.git, which also has a detailed explanation of the required steps in the README file. Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com> Signed-off-by: Anthony Knapp <anthony.j.knapp@intel.com> Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 19:35:28 +0000