summaryrefslogtreecommitdiffstats
path: root/drivers/nvme/target/admin-cmd.c
AgeCommit message (Collapse)AuthorFilesLines
2019-11-04nvmet: clean up command parsing a bitChristoph Hellwig1-0/+5
Move the special cases for fabrics commands and the discovery controller to nvmet_parse_admin_cmd in preparation for adding passthrough support. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: Remove the data_len field from the nvmet_req structChristoph Hellwig1-11/+24
Instead of storing the expected length and checking it when it's executed, just check the length inside the command themselves. A new helper, nvmet_check_data_len() is created to help with this check. Signed-off-by: Christoph Hellwig <hch@lst.de> [split patch, udpate changelog] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: Introduce common execute function for get_log_page and identifyChristoph Hellwig1-43/+50
Instead of picking the sub-command handler to execute in a nested switch statement introduce a landing functions that calls out to the appropriate sub-command handler. This will allow us to have a common place in the handler to check the transfer length in a future patch. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> [split patch, update change log] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-12nvmet: fix a wrong error status returned in error log pageAmit1-5/+3
When the command data_len cannot hold all the controller errors, we should simply return as much errors as we can fit instead of failing the command. Signed-off-by: Amit Engel <amit.engel@dell.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvmet: fix data units read and written counters in SMART logTom Wu1-6/+8
In nvme spec 1.3 there is a definition for data write/read counters from SMART log, (See section 5.14.1.2): This value is reported in thousands (i.e., a value of 1 corresponds to 1000 units of 512 bytes read) and is rounded up. However, in nvme target where value is reported with actual units, but not thousands of units as the spec requires. Signed-off-by: Tom Wu <tomwu@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-09nvmet: export I/O characteristics attributes in IdentifyBart Van Assche1-0/+3
Make the NVMe NAWUN, NAWUPF, NACWU, NPWG, NPWA, NPDG and NOWS attributes available to initator systems for the block backend. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-11nvmet: fix discover log page when offsets are usedKeith Busch1-0/+5
The nvme target hadn't been taking the Get Log Page offset parameter into consideration, and so has been returning corrupted log pages when offsets are used. Since many tools, including nvme-cli, split the log request to 4k, we've been breaking discovery log responses when more than 3 subsystems exist. Fix the returned data by internally generating the entire discovery log page and copying only the requested bytes into the user buffer. The command log page offset type has been modified to a native __le64 to make it easier to extract the value from a command. Signed-off-by: Keith Busch <keith.busch@intel.com> Tested-by: Minwoo Im <minwoo.im@samsung.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-02-20nvmet: convert to SPDX identifiersChristoph Hellwig1-9/+1
Update license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2018-12-13nvmet: update smart log with num err log entriesChaitanya Kulkarni1-0/+6
Now that we have error log page implementation update smart log command handler to provide number of error log entries in the lifetime of the controller field. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-13nvmet: add error log page cmd handlerChaitanya Kulkarni1-7/+29
Now that we have support for all the major parts of the target we add a NVMe error log page handler so that host can read the log page. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-13nvmet: add error log support for admin-cmdChaitanya Kulkarni1-4/+18
This patch adds the support to maintain the error log page for admin commands. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-13nvme: remove nvme_common command cdw10 arrayChaitanya Kulkarni1-6/+6
This is a preparation patch which removes the nvme common command cdw10 array and replace with individual fields. This is needed for the nvmet error log page implementation make is error log page entry offset assignment easier. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-07nvmet: make kato and AEN processing for use by other controllersJay Sternberg1-15/+39
Make common process of get/set features available to other controllers by making simple functions static inline and others not static and prototypes in nvmet.h file Also remove static from nvmet_execute_async_event and add prototype to nvmet.h to allow used by other controllers Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07nvmet: allow Keep Alive for Discovery controllerJay Sternberg1-1/+1
Per change to specification allowing Discovery controllers to have explicit persistent connections, remove restriction on Discovery controllers allowing kato on connect. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07nvmet: change aen mask functions to use bit numbersJay Sternberg1-2/+2
Functions nvmet_aen_disabled and nvmet_clear_aen were using values not bit numbers ie 1 << 9 not 9 for bit function clear_bit and test_and_set_bit. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Reviewed-by: Phil Cayton <phil.cayton@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07nvmet: provide aen bit functions for multiple controller typesJay Sternberg1-13/+0
Move nvmet_aen_disabled and nvmet_clear_aen in preparation for other types of controllers to use, initially the discovery controller. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07nvmet: support for traffic based keep-aliveSagi Grimberg1-1/+2
A controller that supports traffic based keep-alive can restart the keep alive timer even when no keep-alive was not received in the kato period as long as other admin or I/O commands were received. For each command set ctrl->cmd_seen to true, and when keep-alive timer expires, if any commands were seen, resched ka_work instead of escalating to a fatal error. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07nvme: introduce ctrl attributes enumerationSagi Grimberg1-1/+1
We are growing more controller attributes, so use a proper enumeration for it. For now just add the 128-bit hostid which we support. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-17nvmet: use strlcpy() instead of strcpy()Bart Van Assche1-1/+1
Although the code modified by this patch looks fine to me, this patch avoids that Coverity reports the following complaint (ID 1364971 and ID 1364973): "You might overrun the 256-character fixed-size string id->subnqn". Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-10-01nvmet: remove redundant module prefixChaitanya Kulkarni1-1/+1
This patch removes the redundant module prefix used in the pr_err() when nvmet_get_smart_log_nsid() failed to find the namespace provided as a part of smart-log command. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-09-17nvme: count all ANA groups for ANA Log pageHannes Reinecke1-0/+4
When issuing a short read on the ANA log page the number of groups should not change, even though the final returned data might contain less groups than that number. Signed-off-by: Hannes Reinecke <hare@suse.com> [switched to a for loop] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-08-08nvmet: add ns write protect supportChaitanya Kulkarni1-0/+76
This patch implements the Namespace Write Protect feature described in "NVMe TP 4005a Namespace Write Protect". In this version, we implement No Write Protect and Write Protect states for target ns which can be toggled by set-features commands from the host side. For write-protect state transition, we need to flush the ns specified as a part of command so we also add helpers for carrying out synchronous flush operations. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> [hch: fixed an incorrect endianess conversion, minor cleanups] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-27nvmet: use Retain Async Event bit to clear AENChaitanya Kulkarni1-2/+15
In the current implementation, we clear the AEN bit when we get the "get log page" command if given log page is associated with AEN. This patch allows optionally retaining the AEN for the ctrl under consideration when Retain Asynchronous Event (RAE) bit is set as a part of "get log page" command. This allows the host to read the Log page and optionally retaining the AEN associated with this log page when using userspace tools like nvme-cli. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> [hch: also use the new helper in the just merged ANA code] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-27nvmet: support configuring ANA groupsChristoph Hellwig1-0/+1
Allow creating non-default ANA groups (group ID > 1). Groups are created either by assigning the group ID to a namespace, or by creating a configfs group object under a specific port. All namespaces assigned to a group that doesn't have a configfs object for a given port are marked as inaccessible. Allow changing the ANA state on a per-port basis by creating an ana_groups directory under each port, and another directory with an ana_state file in it. The default ANA group 1 directory is created automatically for each port. For all changes in ANA configuration the ANA change AEN is sent. We only keep a global changecount instead of additional per-group changecounts to keep the implementation as simple as possible. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2018-07-27nvmet: add minimal ANA supportChristoph Hellwig1-4/+83
Add support for Asynchronous Namespace Access as specified in NVMe 1.3 TP 4004. Just add a default ANA group 1 that is optimized on all ports. This is (and will remain) the default assignment for any namespace not epxlicitly assigned to another ANA group. The ANA state can be manually changed through the configfs interface, including the change state. Includes fixes and improvements from Hannes Reinecke. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2018-07-27nvmet: track and limit the number of namespaces per subsystemChristoph Hellwig1-0/+1
TP 4004 introduces a new 'Maximum Number of Allocated Namespaces' field in the Identify controller data to help the host size resources. Put an upper limit on the supported namespaces to be able to support this value as supporting 32-bits worth of namespaces would lead to very large buffers. The limit is completely arbitrary at this point. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2018-07-24nvmet: don't use uuid_le typeAndy Shevchenko1-1/+1
Don't use sizeof(uuid_le) where none of the parameters is type of uuid_le. Since both arguments are u8 [16], use size of destination there. Moreover, uuid_le is a deprecated type, and nvmet is using uuid_t already. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-23nvmet-rdma: support max(16KB, PAGE_SIZE) inline dataSteve Wise1-2/+2
The patch enables inline data sizes using up to 4 recv sges, and capping the size at 16KB or at least 1 page size. So on a 4K page system, up to 16KB is supported, and for a 64K page system 1 page of 64KB is supported. We avoid > 0 order page allocations for the inline buffers by using multiple recv sges, one for each page. If the device cannot support the configured inline data size due to lack of enough recv sges, then log a warning and reduce the inline size. Add a new configfs port attribute, called param_inline_data_size, to allow configuring the size of inline data for a given nvmf port. The maximum size allowed is still enforced by nvmet-rdma with NVMET_RDMA_MAX_INLINE_DATA_SIZE, which is now max(16KB, PAGE_SIZE). And the default size, if not specified via configfs, is still PAGE_SIZE. This preserves the existing behavior, but allows larger inline sizes for small page systems. If the configured inline data size exceeds NVMET_RDMA_MAX_INLINE_DATA_SIZE, a warning is logged and the size is reduced. If param_inline_data_size is set to 0, then inline data is disabled for that nvmf port. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-23nvmet: add commands supported and effects log pageChaitanya Kulkarni1-1/+34
This patch adds support for Commands Supported and Effects log page (Log Identifier 05h) for NVMeOF. This also makes it easier to find which commands are supported, e.g. :- subnqn : testnqn1 Admin Command Set ACS2 [Get Log Page ] 00000001 ACS6 [Identify ] 00000001 ACS8 [Abort ] 00000001 ACS9 [Set Features ] 00000001 ACS10 [Get Features ] 00000001 ACS12 [Asynchronous Event Request ] 00000001 ACS24 [Keep Alive ] 00000001 NVM Command Set IOCS0 [Flush ] 00000001 IOCS1 [Write ] 00000001 IOCS2 [Read ] 00000001 IOCS8 [Write Zeroes ] 00000001 IOCS9 [Dataset Management ] 00000001 This partticular functionality can be used from the host side to examine the NVMeOF ctrl commands supported. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-11nvmet: free smart-log buffer after useChaitanya Kulkarni1-1/+3
Free smart-log buffer allocated in the function after use. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-08nvmet: return all zeroed buffer when we can't find an active namespaceChristoph Hellwig1-6/+9
Quote from Figure 106 in NVMe 1.3a: The Identify Namespace data structure is returned to the host for the namespace specified in the Namespace Identifier (CDW1.NSID) field if it is an active NSID. If the specified namespace is not an active NSID, then the controller returns a zero filled data structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@rimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01nvmet: mask pending AENsChristoph Hellwig1-0/+1
Per section 5.2 of the NVMe 1.3 spec: "When the controller posts a completion queue entry for an outstanding Asynchronous Event Request command and thus reports an asynchronous event, subsequent events of that event type are automatically masked by the controller until the host clears that event. An event is cleared by reading the log page associated with that event using the Get Log Page command (see section 5.14)." Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2018-06-01nvmet: add AEN configuration supportChristoph Hellwig1-2/+13
AEN configuration via the 'Get Features' and 'Set Features' admin command is mandatory, so we should be implemeting handling for it. Signed-off-by: Hannes Reinecke <hare@suse.com> [hch: use WRITE_ONCE, check for invalid values] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
2018-06-01nvmet: implement the changed namespaces logChristoph Hellwig1-0/+26
Just keep a per-controller buffer of changed namespaces and copy it out in the get log page implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
2018-06-01nvmet: split log page implementationChristoph Hellwig1-63/+36
Remove the common code to allocate a buffer and copy it into the SGL. Instead the two no-op implementations just zero the SGL directly, and the smart log allocates a buffer on its own. This prepares for the more elaborate ANA log page. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2018-05-25nvmet: add simple file backed ns supportChaitanya Kulkarni1-0/+8
This patch adds simple file backed namespace support for NVMeOF target. The new file io-cmd-file.c is responsible for handling the code for I/O commands when ns is file backed. Also, we introduce mempools based slow path using sync I/Os for file backed ns to ensure forward progress under reclaim. The old block device based implementation is moved to io-cmd-bdev.c and use a "nvmet_bdev_" symbol prefix. The enable/disable calls are also move into the respective files. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> [hch: updated changelog, fixed double req->ns lookup in bdev case] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-25nvmet: remove duplicate NULL initialization for req->nsChaitanya Kulkarni1-2/+0
Remove the duplicate NULL initialization for req->ns. req->ns is always initialized to NULL in nvmet_req_init(), so there is no need to reset it later on failures unless we have previously assigned a value to it. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-12nvmet: fix space padding in serial numberDaniel Verkamp1-0/+1
Commit 42de82a8b544 previously attempted to fix this, and it did correctly pad the MN and FR fields with spaces, but the SN field still contains 0 bytes. The current code fills out the first 16 bytes with hex2bin, leaving the last 4 bytes zeroed. Rather than adding a lot of error-prone math to avoid overwriting SN twice, just set the whole thing to spaces up front (it's only 20 bytes). Fixes: 42de82a8b544 ("nvmet: don't report 0-bytes in serial number") Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvmet: remove redundant local variableSagi Grimberg1-9/+4
the status is either success or some status id and we don't need a local variable for it. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvmet: remove redundant memset if failed to get_smart_log failedSagi Grimberg1-3/+1
We already allocated the buffer with kzalloc. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvmet: fix comment typos in admin-cmd.cMinwoo Im1-2/+2
small typos fixed in admin-cmd.c Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-30nvmet: add support for reporting the host identifierOmri Mann1-2/+15
And fix the Get/Set Log Page implementation to take all 8 bits of the feature identifier into account. Signed-off-by: Omri Mann <omri@excelero.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> [hch: used the UUID API, updated changelog]
2017-08-28nvmet: use memcpy_and_pad for identify sn/frMartin Wilck1-11/+3
This changes the earlier patch "nvmet: don't report 0-bytes in serial number" to use the memcpy_and_pad() helper introduced in a previous patch. Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvmet: use NVME_NSID_ALLChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
2017-08-16nvmet: don't overwrite identify sn/fr with 0-bytesMartin Wilck1-6/+0
The merged version of my patch "nvmet: don't report 0-bytes in serial number" fails to remove two lines which should have been replaced, so that the space-padded strings are overwritten again with 0-bytes. Fix it. Fixes: 42de82a8b544 nvmet: don't report 0-bytes in serial number Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-20nvmet: don't report 0-bytes in serial numberMartin Wilck1-2/+14
The NVME standard mandates that the SN, MN, and FR fields of the Identify Controller Data Structure be "ASCII strings". That means that they may not contain 0-bytes, not even string terminators. Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.de> [hch: fixed for the move of the serial field, updated description] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20nvmet: Move serial number from controller to subsystemJohannes Thumshirn1-1/+1
The NVMe specification defines the serial number as: "Serial Number (SN): Contains the serial number for the NVM subsystem that is assigned by the vendor as an ASCII string. Refer to section 7.10 for unique identifier requirements. Refer to section 1.5 for ASCII string requirements" So move it from the controller to the subsystem, where it belongs. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-15nvmet: implement namespace identify descriptor listJohannes Thumshirn1-0/+61
A NVMe Identify NS command with a CNS value of '3' is expecting a list of Namespace Identification Descriptor structures to be returned to the host for the namespace requested in the namespace identify command. This Namespace Identification Descriptor structure consists of the type of the namespace identifier, the length of the identifier and the actual identifier. Valid types are NGUID and UUID which we have saved in our nvme_ns structure if they have been configured via configfs. If no value has been assigened to one of these we return an "invalid opcode" back to the host to maintain backward compatibiliy with older implementations without Namespace Identify Descriptor list support. Also as the Namespace Identify Descriptor list is the only mandatory feature change between 1.2.1 and 1.3 we can bump the advertised version as well. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvmet: use NVME_IDENTIFY_DATA_SIZEJohannes Thumshirn1-2/+2
Use NVME_IDENTIFY_DATA_SIZE define instead of hard coding the magic 4096 value. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.com> [hch: converted three more users] Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-07Merge branch 'for-linus' into for-4.12/blockJens Axboe1-1/+1
We've added a considerable amount of fixes for stalls and issues with the blk-mq scheduling in the 4.11 series since forking off the for-4.12/block branch. We need to do improvements on top of that for 4.12, so pull in the previous fixes to make our lives easier going forward. Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 20:03:45 +0000