Age | Commit message (Collapse) | Author | Files | Lines |
|
Discovery controllers usually don't support smart log page command.
So when we connect to the discovery controller we see this warning:
nvme nvme0: Failed to read smart log (error 24577)
nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.123.1:8009
nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
Introduce a new helper to understand if the controller is a discovery
controller and use this helper to skip nvme_init_hwmon (also use it in
other places that we check if the controller is a discovery controller).
Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When a bio merges, we can get a request that spans multiple
bios, and the overall request payload size is the sum of
all bios. When we calculate how much we need to send
from the existing bio (and bvec), we did not take into
account the iov_iter byte count cap.
Since multipage bvecs support, bvecs can split in the middle
which means that when we account for the last bvec send we
should also take the iov_iter byte count cap as it might be
lower than the last bvec size.
Reported-by: Hao Wang <pkuwangh@gmail.com>
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Tested-by: Hao Wang <pkuwangh@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We shouldn't call smp_processor_id() in a preemptible
context, but this is advisory at best, so instead
call __smp_processor_id().
Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context")
Reported-by: Or Gerlitz <gerlitz.or@gmail.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The only used argument in this function is the "req".
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There are no callers for nvme_reset_ctrl_sync() and
nvme_alloc_request_qid() so that we keep the symbols exported.
Unexport those functions, mark them static and update the header file
respectively.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
While handling the completion queue, keep a local copy of the command id
from the DMA-accessible completion entry. This silences a time-of-check
to time-of-use (TOCTOU) warning from KF/x[1], with respect to a
Thunderclap[2] vulnerability analysis. The double-read impact appears
benign.
There may be a theoretical window for @command_id to be used as an
adversary-controlled array-index-value for mounting a speculative
execution attack, but that mitigation is saved for a potential follow-on.
A man-in-the-middle attack on the data payload is out of scope for this
analysis and is hopefully mitigated by filesystem integrity mechanisms.
[1] https://github.com/intel/kernel-fuzzer-for-xen-project
[2] http://thunderclap.io/thunderclap-paper-ndss2019.pdf
Signed-off-by: Lalithambika Krishna Kumar <lalithambika.krishnakumar@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We may send a request (with or without its data) from two paths:
1. From our I/O context nvme_tcp_io_work which is triggered from:
- queue_rq
- r2t reception
- socket data_ready and write_space callbacks
2. Directly from queue_rq if the send_list is empty (because we want to
save the context switch associated with scheduling our io_work).
However, given that now we have the send_mutex, we may run into a race
condition where none of these contexts will send the pending payload to
the controller. Both io_work send path and queue_rq send path
opportunistically attempt to acquire the send_mutex however queue_rq only
attempts to send a single request, and if io_work context fails to
acquire the send_mutex it will complete without rescheduling itself.
The race can trigger with the following sequence:
1. queue_rq sends request (no incapsule data) and blocks
2. RX path receives r2t - prepares data PDU to send, adds h2cdata PDU
to the send_list and schedules io_work
3. io_work triggers and cannot acquire the send_mutex - because of (1),
ends without self rescheduling
4. queue_rq completes the send, and completes
==> no context will send the h2cdata - timeout.
Fix this by having queue_rq sending as much as it can from the send_list
such that if it still has any left, its because the socket buffer is
full and the socket write_space callback will trigger, thus guaranteeing
that a context will be scheduled to send the h2cdata PDU.
Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context")
Reported-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reported-by: Samuel Jones <sjones@kalrayinc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A system with more than one of these SSDs will only have one usable.
Hence the kernel fails to detect nvme devices due to duplicate cntlids.
[ 6.274554] nvme nvme1: Duplicate cntlid 33 with nvme0, rejecting
[ 6.274566] nvme nvme1: Removing after probe failure status: -22
Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue.
Signed-off-by: Gopal Tiwari <gtiwari@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Recent patches changed calling sequences. nvme_fc_abort_outstanding_ios
used to be called from a timeout or work context. Now it is being called
in an io completion context, which can be an interrupt handler.
Unfortunately, the abort outstanding ios routine attempts to stop nvme
queues and nested routines that may try to sleep, which is in conflict
with the interrupt handler.
Correct replacing the direct call with a work element scheduling, and the
abort outstanding ios routine will be called in the work element.
Fixes: 95ced8a2c72d ("nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery")
Signed-off-by: James Smart <james.smart@broadcom.com>
Reported-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull rdma updates from Jason Gunthorpe:
"A smaller set of patches, nothing stands out as being particularly
major this cycle. The biggest item would be the new HIP09 HW support
from HNS, otherwise it was pretty quiet for new work here:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw,
cxgb4, mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits)
RDMA/cma: Don't overwrite sgid_attr after device is released
RDMA/mlx5: Fix MR cache memory leak
RDMA/rxe: Use acquire/release for memory ordering
RDMA/hns: Simplify AEQE process for different types of queue
RDMA/hns: Fix inaccurate prints
RDMA/hns: Fix incorrect symbol types
RDMA/hns: Clear redundant variable initialization
RDMA/hns: Fix coding style issues
RDMA/hns: Remove unnecessary access right set during INIT2INIT
RDMA/hns: WARN_ON if get a reserved sl from users
RDMA/hns: Avoid filling sl in high 3 bits of vlan_id
RDMA/hns: Do shift on traffic class when using RoCEv2
RDMA/hns: Normalization the judgment of some features
RDMA/hns: Limit the length of data copied between kernel and userspace
RDMA/mlx4: Remove bogus dev_base_lock usage
RDMA/uverbs: Fix incorrect variable type
RDMA/core: Do not indicate device ready when device enablement fails
RDMA/core: Clean up cq pool mechanism
RDMA/core: Update kernel documentation for ib_create_named_qp()
MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address
...
|
|
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
|
|
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
|
|
The request_queue can trivially be derived from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allow ZNS NVMe SSDs to present a read-only namespace when append is not
supported, instead of rejecting the namespace directly.
This allows (i) the namespace to be used in read-only mode, which is not
a problem as the append command only affects the write path, and (ii) to
use standard management tools such as nvme-cli to choose a different
format or firmware slot that is compatible with the Linux zoned block
device.
Signed-off-by: Javier González <javier.gonz@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Remane block device operations in preparation to add char device file
operations.
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Rename controller base dev_t char device in preparation for adding a
namespace char device.
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Cleanup unnecessary ret values that are not checked or used in
nvme_alloc_ns().
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
During the scan_work, an Identify command is issued to figure out which
namespaces are active. If this command fails, the nvme driver falls back
to scanning namespaces sequentially. In this situation, we don't see
any warnings and don't even know whether list-ns command has been failed
or not easiliy.
Printa warning when the Identify command executin fail:
[ 1.108399] nvme nvme0: Identify NS List failed (status=0x400b)
[ 1.109583] nvme0n1: detected capacity change from 0 to 1048576
[ 1.112186] nvme nvme0: Identify Descriptors failed (nsid=2, status=0x4002)
[ 1.113929] nvme nvme0: Identify Descriptors failed (nsid=3, status=0x4002)
[ 1.116537] nvme nvme0: Identify Descriptors failed (nsid=4, status=0x4002)
...
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add the namespace ID to the error message when the Identify command used
to retrieve the Namespace Identification Descriptor list fails.
This avoids rather useless and duplicative messages like the following:
[ 1.321031] nvme nvme0: Identify Descriptors failed (16386)
[ 1.321948] nvme nvme0: Identify Descriptors failed (16386)
[ 1.322872] nvme nvme0: Identify Descriptors failed (16386)
[ 1.323775] nvme nvme0: Identify Descriptors failed (16386)
[ 1.324687] nvme nvme0: Identify Descriptors failed (16386)
...
Also, print the nvme status code in hexadecimal rather than decimal
format rather for better readability.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commands get stuck while Host NVMe-oF controller is in reconnect state.
The controller enters into reconnect state when it loses connection with
the target. It tries to reconnect every 10 seconds (default) until
a successful reconnect or until the reconnect time-out is reached.
The default reconnect time out is 10 minutes.
Applications are expecting commands to complete with success or error
within a certain timeout (30 seconds by default). The NVMe host is
enforcing that timeout while it is connected, but during reconnect the
timeout is not enforced and commands may get stuck for a long period or
even forever.
To fix this long delay due to the default timeout, introduce new
"fast_io_fail_tmo" session parameter. The timeout is measured in seconds
from the controller reconnect and any command beyond that timeout is
rejected. The new parameter value may be passed during 'connect'.
The default value of -1 means no timeout (similar to current behavior).
Signed-off-by: Victor Gladkov <victor.gladkov@kioxia.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
currently the NVME_QUIRK_SHARED_TAGS quirk for Apple devices is handled
during the assignment of nr_io_queues in nvme_setup_io_queues().
This however means that for these devices nvme_max_io_queues() will
actually not return the supported maximum which is confusing and
unexpected and also means that in nvme_probe() we are allocating
for I/O queues that will never be used.
Fix this by moving the quirk handling into nvme_max_io_queues().
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
in nvme_setup_io_queues() the number of I/O queues is set to either 1 in
case of a quirky Apple device or to the min of nvme_max_io_queues() or
dev->nr_allocated_queues - 1.
This is unnecessarily complicated as dev->nr_allocated_queues is only
assigned once and is nvme_max_io_queues() + 1.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Right now nvme_alloc_request() allocates a request from block layer
based on the value of the qid. When qid set to NVME_QID_ANY it used
blk_mq_alloc_request() else blk_mq_alloc_request_hctx().
The function nvme_alloc_request() is called from different context, The
only place where it uses non NVME_QID_ANY value is for fabrics connect
commands :-
nvme_submit_sync_cmd() NVME_QID_ANY
nvme_features() NVME_QID_ANY
nvme_sec_submit() NVME_QID_ANY
nvmf_reg_read32() NVME_QID_ANY
nvmf_reg_read64() NVME_QID_ANY
nvmf_reg_write32() NVME_QID_ANY
nvmf_connect_admin_queue() NVME_QID_ANY
nvme_submit_user_cmd() NVME_QID_ANY
nvme_alloc_request()
nvme_keep_alive() NVME_QID_ANY
nvme_alloc_request()
nvme_timeout() NVME_QID_ANY
nvme_alloc_request()
nvme_delete_queue() NVME_QID_ANY
nvme_alloc_request()
nvmet_passthru_execute_cmd() NVME_QID_ANY
nvme_alloc_request()
nvmf_connect_io_queue() QID
__nvme_submit_sync_cmd()
nvme_alloc_request()
With passthru nvme_alloc_request() now falls into the I/O fast path such
that blk_mq_alloc_request_hctx() is never gets called and that adds
additional branch check in fast path.
Split the nvme_alloc_request() into nvme_alloc_request() and
nvme_alloc_request_qid().
Replace each call of the nvme_alloc_request() with NVME_QID_ANY param
with a call to newly added nvme_alloc_request() without NVME_QID_ANY.
Replace a call to nvme_alloc_request() with QID param with a call to
newly added nvme_alloc_request() and nvme_alloc_request_qid()
based on the qid value set in the __nvme_submit_sync_cmd().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This is purely a clenaup patch, add prefix NVME to the ADMIN_TIMEOUT to
make consistent with NVME_IO_TIMEOUT.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The function nvme_alloc_request() is called from different context
(I/O and Admin queue) where callers do not consider the I/O timeout when
called from I/O queue context.
Update nvme_alloc_request() to set the default I/O and Admin timeout
value based on whether the queuedata is set or not.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use the request's '->mq_hctx->queue_num' directly to simplify the
nvme_req_qid() function.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
From https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git
The rc RDMA branch is needed due to dependencies on the next patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use the block layer helper to update both the disk and block device
sizes. Contrary to the name no notification is sent in this case,
as a size 0 is special cased.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The update_bdev argument is always set to true, so remove it. Also
rename the function to the slighly less verbose set_capacity_and_notify,
as propagating the disk size to the block device isn't really
revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no good reason to call revalidate_disk_size separately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
xa_destroy() frees only internal data. The caller is responsible for
freeing the exteranl objects referenced by an xarray.
Fixes: 1cf7a12e09aa4 ("nvme: use an xarray to lookup the Commands Supported and Effects log")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Remove the struct used for tracking known command effects logs in a
list. This is now saved in an xarray that doesn't use these elements.
Instead, store the log directly instead of the wrapper struct.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If Doorbell Buffer Config command fails even 'dev->dbbuf_dbs != NULL'
which means OACS indicates that NVME_CTRL_OACS_DBBUF_SUPP is set,
nvme_dbbuf_update_and_check_event() will check event even it's not been
successfully set.
This patch fixes mismatch among dbbuf for sq/cqs in case that dbbuf
command fails.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
->dma_device is a private implementation detail of the RDMA core. Use the
ibdev_to_node helper to get the NUMA node for a ib_device instead of
poking into ->dma_device.
Link: https://lore.kernel.org/r/20201106181941.1878556-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The offending commit breaks BLKROSET ioctl because a device
revalidation will blindly override BLKROSET setting. Hence,
we remove the disk rw setting in case NVME_NS_ATTR_RO is cleared
from by the controller.
Fixes: 1293477f4f32 ("nvme: set gendisk read only based on nsattr")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for 5.10:
- revert a nvme_queue size optimization (Keith Bush)
- fabrics timeout races fixes (Chao Leng and Sagi Grimberg)"
* tag 'nvme-5.10-2020-11-05' of git://git.infradead.org/nvme:
nvme-tcp: avoid repeated request completion
nvme-rdma: avoid repeated request completion
nvme-tcp: avoid race between time out and tear down
nvme-rdma: avoid race between time out and tear down
nvme: introduce nvme_sync_io_queues
Revert "nvme-pci: remove last_sq_tail"
|
|
The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_tcp_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_rdma_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now use teardown_lock to serialize for time out and tear down. This may
cause abnormal: first cancel all request in tear down, then time out may
complete the request again, but the request may already be freed or
restarted.
To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue. At the same time we need to delete
teardown_lock.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now use teardown_lock to serialize for time out and tear down. This may
cause abnormal: first cancel all request in tear down, then time out may
complete the request again, but the request may already be freed or
restarted.
To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue. At the same time we need to delete
teardown_lock.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Introduce sync io queues for some scenarios which just only need sync
io queues not sync all queues.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Multiple CPUs may be mapped to the same hctx, allowing mulitple
submission contexts to attempt commit_rqs(). We need to verify we're
not writing the same doorbell value multiple times since that's a spec
violation.
Revert commit 54b2fcee1db041a83b52b51752dade6090cf952f.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1878596
Reported-by: "B.L. Jones" <brandon.gustav@googlemail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- null_blk zone fixes (Damien, Kanchan)
- NVMe pull request from Christoph:
- improve zone revalidation (Keith Busch)
- gracefully handle zero length messages in nvme-rdma (zhenwei pi)
- nvme-fc error handling fixes (James Smart)
- nvmet tracing NULL pointer dereference fix (Chaitanya Kulkarni)"
- xsysace platform fixes (Andy)
- scatterlist type cleanup (David)
- blk-cgroup memory fixes (Gabriel)
- nbd block size update fix (Ming)
- Flush completion state fix (Ming)
- bio_add_hw_page() iteration fix (Naohiro)
* tag 'block-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
blk-mq: mark flush request as IDLE in flush_end_io()
lib/scatterlist: use consistent sg_copy_buffer() return type
xsysace: use platform_get_resource() and platform_get_irq_optional()
null_blk: Fix locking in zoned mode
null_blk: Fix zone reset all tracing
nbd: don't update block size after device is started
block: advance iov_iter on bio_add_hw_page failure
null_blk: synchronization fix for zoned device
nvmet: fix a NULL pointer dereference when tracing the flush command
nvme-fc: remove nvme_fc_terminate_io()
nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery
nvme-fc: remove err_work work item
nvme-fc: track error_recovery while connecting
nvme-rdma: handle unexpected nvme completion data length
nvme: ignore zone validate errors on subsequent scans
blk-cgroup: Pre-allocate tree node on blkg_conf_prep
blk-cgroup: Fix memleak on error path
|
|
There are two flows for handling RDMA_CM_EVENT_ROUTE_RESOLVED, either the
handler triggers a completion and another thread does rdma_connect() or
the handler directly calls rdma_connect().
In all cases rdma_connect() needs to hold the handler_mutex, but when
handler's are invoked this is already held by the core code. This causes
ULPs using the 2nd method to deadlock.
Provide a rdma_connect_locked() and have all ULPs call it from their
handlers.
Link: https://lore.kernel.org/r/0-v2-53c22d5c1405+33-rdma_connect_locking_jgg@nvidia.com
Reported-and-tested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Fixes: 2a7cec538169 ("RDMA/cma: Fix locking for the RDMA_CM_CONNECT state")
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
__nvme_fc_terminate_io() is now called by only 1 place, in reset_work.
Consoldate and move the functionality of terminate_io into reset_work.
In reset_work, rather than calling the create_association directly,
schedule the connect work element to do its thing. After scheduling,
flush the connect work element to continue with semantic of not
returning until connect has been attempted at least once.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvme_fc_error_recovery() special cases handling when in CONNECTING state
and calls __nvme_fc_terminate_io(). __nvme_fc_terminate_io() itself
special cases CONNECTING state and calls the routine to abort outstanding
ios.
Simplify the sequence by putting the call to abort outstanding I/Os
directly in nvme_fc_error_recovery.
Move the location of __nvme_fc_abort_outstanding_ios(), and
nvme_fc_terminate_exchange() which is called by it, to avoid adding
function prototypes for nvme_fc_error_recovery().
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
err_work was created to handle errors (mainly I/O timeouts) while in
CONNECTING state. The flag for err_work_active is also unneeded.
Remove err_work_active and err_work. The actions to abort I/Os are moved
inline to nvme_error_recovery().
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Whenever there are errors during CONNECTING, the driver recovers by
aborting all outstanding ios and counts on the io completion to fail them
and thus the connection/association they are on. However, the connection
failure depends on a failure state from the core routines. Not all
commands that are issued by the core routine are guaranteed to cause a
failure of the core routine. They may be treated as a failure status and
the status is then ignored.
As such, whenever the transport enters error_recovery while CONNECTING,
it will set a new flag indicating an association failed. The
create_association routine which creates and initializes the controller,
will monitor the state of the flag as well as the core routine error
status and ensure the association fails if there was an error.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Receiving a zero length message leads to the following warnings because
the CQE is processed twice:
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 0 at lib/refcount.c:28
RIP: 0010:refcount_warn_saturate+0xd9/0xe0
Call Trace:
<IRQ>
nvme_rdma_recv_done+0xf3/0x280 [nvme_rdma]
__ib_process_cq+0x76/0x150 [ib_core]
...
Sanity check the received data length, to avoids this.
Thanks to Chao Leng & Sagi for suggestions.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|