summaryrefslogtreecommitdiffstats
path: root/drivers/nvdimm
AgeCommit message (Collapse)AuthorFilesLines
2017-09-18libnvdimm, namespace: fix btt claim class crashDan Williams1-0/+9
Maurice reports: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: holder_class_store+0x253/0x2b0 [libnvdimm] ...while trying to reconfigure an NVDIMM-N namespace into 'sector' / 'btt' mode. The crash points to this line: (gdb) li *(holder_class_store+0x253) 0x7773 is in holder_class_store (drivers/nvdimm/namespace_devs.c:1420). 1415 for (i = 0; i < nd_region->ndr_mappings; i++) { 1416 struct nd_mapping *nd_mapping = &nd_region->mapping[i]; 1417 struct nvdimm_drvdata *ndd = to_ndd(nd_mapping); 1418 struct nd_namespace_index *nsindex; 1419 1420 nsindex = to_namespace_index(ndd, ndd->ns_current); ...where we are failing because ndd is NULL due to NVDIMM-N dimms not supporting labels. Long story short, default to the BTTv1 format in the label-less / NVDIMM-N case. Fixes: 14e494542636 ("libnvdimm, btt: BTT updates for UEFI 2.7 format") Cc: <stable@vger.kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Reported-by: Maurice A. Saldivar <maurice.a.saldivar@hpe.com> Tested-by: Maurice A. Saldivar <maurice.a.saldivar@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-09-14Merge tag 'for-4.14/dm-changes' of ↵Linus Torvalds1-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Some request-based DM core and DM multipath fixes and cleanups - Constify a few variables in DM core and DM integrity - Add bufio optimization and checksum failure accounting to DM integrity - Fix DM integrity to avoid checking integrity of failed reads - Fix DM integrity to use init_completion - A couple DM log-writes target fixes - Simplify DAX flushing by eliminating the unnecessary flush abstraction that was stood up for DM's use. * tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dax: remove the pmem_dax_ops->flush abstraction dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK dm integrity: make blk_integrity_profile structure const dm integrity: do not check integrity for failed read operations dm log writes: fix >512b sectorsize support dm log writes: don't use all the cpu while waiting to log blocks dm ioctl: constify ioctl lookup table dm: constify argument arrays dm integrity: count and display checksum failures dm integrity: optimize writing dm-bufio buffers that are partially changed dm rq: do not update rq partially in each ending bio dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior dm mpath: complain about unsupported __multipath_map_bio() return values dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through
2017-09-11Merge tag 'libnvdimm-for-4.14' of ↵Linus Torvalds12-124/+259
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm from Dan Williams: "A rework of media error handling in the BTT driver and other updates. It has appeared in a few -next releases and collected some late- breaking build-error and warning fixups as a result. Summary: - Media error handling support in the Block Translation Table (BTT) driver is reworked to address sleeping-while-atomic locking and memory-allocation-context conflicts. - The dax_device lookup overhead for xfs and ext4 is moved out of the iomap hot-path to a mount-time lookup. - A new 'ecc_unit_size' sysfs attribute is added to advertise the read-modify-write boundary property of a persistent memory range. - Preparatory fix-ups for arm and powerpc pmem support are included along with other miscellaneous fixes" * tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits) libnvdimm, btt: fix format string warnings libnvdimm, btt: clean up warning and error messages ext4: fix null pointer dereference on sbi libnvdimm, nfit: move the check on nd_reserved2 to the endpoint dax: fix FS_DAX=n BLOCK=y compilation libnvdimm: fix integer overflow static analysis warning libnvdimm, nd_blk: remove mmio_flush_range() libnvdimm, btt: rework error clearing libnvdimm: fix potential deadlock while clearing errors libnvdimm, btt: cache sector_size in arena_info libnvdimm, btt: ensure that flags were also unchanged during a map_read libnvdimm, btt: refactor map entry operations with macros libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute ext4: perform dax_device lookup at mount ext2: perform dax_device lookup at mount xfs: perform dax_device lookup at mount dax: introduce a fs_dax_get_by_bdev() helper libnvdimm, btt: check memory allocation failure libnvdimm, label: fix index block size calculation ...
2017-09-11dax: remove the pmem_dax_ops->flush abstractionMikulas Patocka1-7/+0
Commit abebfbe2f731 ("dm: add ->flush() dax operation support") is buggy. A DM device may be composed of multiple underlying devices and all of them need to be flushed. That commit just routes the flush request to the first device and ignores the other devices. It could be fixed by adding more complex logic to the device mapper. But there is only one implementation of the method pmem_dax_ops->flush - that is pmem_dax_flush() - and it calls arch_wb_cache_pmem(). Consequently, we don't need the pmem_dax_ops->flush abstraction at all, we can call arch_wb_cache_pmem() directly from dax_flush() because dax_dev->ops->flush can't ever reach anything different from arch_wb_cache_pmem(). It should be also pointed out that for some uses of persistent memory it is needed to flush only a very small amount of data (such as 1 cacheline), and it would be overkill if we go through that device mapper machinery for a single flushed cache line. Fix this by removing the pmem_dax_ops->flush abstraction and call arch_wb_cache_pmem() directly from dax_flush(). Also, remove the device mapper code that forwards the flushes. Fixes: abebfbe2f731 ("dm: add ->flush() dax operation support") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-09libnvdimm, btt: fix format string warningsRandy Dunlap1-2/+2
Fix format warnings (seen on i386) in nvdimm/btt.c: ../drivers/nvdimm/btt.c: In function ‘btt_map_init’: ../drivers/nvdimm/btt.c:430:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘size_t’ [-Wformat=] dev_WARN_ONCE(to_dev(arena), size < 512, ^ ../drivers/nvdimm/btt.c: In function ‘btt_log_init’: ../drivers/nvdimm/btt.c:474:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘size_t’ [-Wformat=] dev_WARN_ONCE(to_dev(arena), size < 512, ^ Fixes: 86652d2eb347 ("libnvdimm, btt: clean up warning and error messages") Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-09-07libnvdimm, btt: clean up warning and error messagesVishal Verma1-22/+36
Convert all WARN* style messages to dev_WARN, and for errors in the IO paths, use dev_err_ratelimited. Also remove some BUG_ONs in the IO path and replace them with the above - no need to crash the machine in case of an unaligned IO. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-09-07Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-blockLinus Torvalds1-4/+5
Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...
2017-09-06block, THP: make block_device_operations.rw_page support THPHuang Ying2-12/+33
The .rw_page in struct block_device_operations is used by the swap subsystem to read/write the page contents from/into the corresponding swap slot in the swap device. To support the THP (Transparent Huge Page) swap optimization, the .rw_page is enhanced to support to read/write THP if possible. Link: http://lkml.kernel.org/r/20170724051840.2309-6-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-04libnvdimm, nfit: move the check on nd_reserved2 to the endpointMeng Xu1-4/+0
Delay the check of nd_reserved2 to the actual endpoint (acpi_nfit_ctl) that uses it, as a prevention of a potential double-fetch bug. While examining the kernel source code, I found a dangerous operation that could turn into a double-fetch situation (a race condition bug) where the same userspace memory region are fetched twice into kernel with sanity checks after the first fetch while missing checks after the second fetch. In the case of _IOC_NR(ioctl_cmd) == ND_CMD_CALL: 1. The first fetch happens in line 935 copy_from_user(&pkg, p, sizeof(pkg) 2. subsequently `pkg.nd_reserved2` is asserted to be all zeroes (line 984 to 986). 3. The second fetch happens in line 1022 copy_from_user(buf, p, buf_len) 4. Given that `p` can be fully controlled in userspace, an attacker can race condition to override the header part of `p`, say, `((struct nd_cmd_pkg *)p)->nd_reserved2` to arbitrary value (say nine 0xFFFFFFFF for `nd_reserved2`) after the first fetch but before the second fetch. The changed value will be copied to `buf`. 5. There is no checks on the second fetches until the use of it in line 1034: nd_cmd_clear_to_send(nvdimm_bus, nvdimm, cmd, buf) and line 1038: nd_desc->ndctl(nd_desc, nvdimm, cmd, buf, buf_len, &cmd_rc) which means that the assumed relation, `p->nd_reserved2` are all zeroes might not hold after the second fetch. And once the control goes to these functions we lose the context to assert the assumed relation. 6. Based on my manual analysis, `p->nd_reserved2` is not used in function `nd_cmd_clear_to_send` and potential implementations of `nd_desc->ndctl` so there is no working exploit against it right now. However, this could easily turns to an exploitable one if careless developers start to use `p->nd_reserved2` later and assume that they are all zeroes. Move the validation of the nd_reserved2 field to the ->ndctl() implementation where it has a stable buffer to evaluate. Signed-off-by: Meng Xu <mengxu.gatech@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31libnvdimm: fix integer overflow static analysis warningDan Williams1-8/+9
Dan reports: The patch 62232e45f4a2: "libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices" from Jun 8, 2015, leads to the following static checker warning: drivers/nvdimm/bus.c:1018 __nd_ioctl() warn: integer overflows 'buf_len' From a casual review, this seems like it might be a real bug. On the first iteration we load some data into in_env[]. On the second iteration we read a use controlled "in_size" from nd_cmd_in_size(). It can go up to UINT_MAX - 1. A high number means we will fill the whole in_env[] buffer. But we potentially keep looping and adding more to in_len so now it can be any value. It simple enough to change, but it feels weird that we keep looping even though in_env is totally full. Shouldn't we just return an error if we don't have space for desc->in_num. We keep looping because the size of the total input is allowed to be bigger than the 'envelope' which is a subset of the payload that tells us how much data to expect. For safety explicitly check that buf_len does not overflow which is what the checker flagged. Cc: <stable@vger.kernel.org> Fixes: 62232e45f4a2: "libnvdimm: control (ioctl) messages for nvdimm_bus..." Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31libnvdimm, nd_blk: remove mmio_flush_range()Robin Murphy1-14/+0
mmio_flush_range() suffers from a lack of clearly-defined semantics, and is somewhat ambiguous to port to other architectures where the scope of the writeback implied by "flush" and ordering might matter, but MMIO would tend to imply non-cacheable anyway. Per the rationale in 67a3e8fe9015 ("nd_blk: change aperture mapping from WC to WB"), the only existing use is actually to invalidate clean cache lines for ARCH_MEMREMAP_PMEM type mappings *without* writeback. Since the recent cleanup of the pmem API, that also now happens to be the exact purpose of arch_invalidate_pmem(), which would be a far more well-defined tool for the job. Rather than risk potentially inconsistent implementations of mmio_flush_range() for the sake of one callsite, streamline things by removing it entirely and instead move the ARCH_MEMREMAP_PMEM related definitions up to the libnvdimm level, so they can be shared by NFIT as well. This allows NFIT to be enabled for arm64. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31libnvdimm, btt: rework error clearingVishal Verma3-19/+111
Clearing errors or badblocks during a BTT write requires sending an ACPI DSM, which means potentially sleeping. Since a BTT IO happens in atomic context (preemption disabled, spinlocks may be held), we cannot perform error clearing in the course of an IO. Due to this error clearing for BTT IOs has hitherto been disabled. In this patch we move error clearing out of the atomic section, and thus re-enable error clearing with BTTs. When we are about to add a block to the free list, we check if it was previously marked as an error, and if it was, we add it to the freelist, but also set a flag that says error clearing will be required. We then drop the lane (ending the atomic context), and send a zero buffer so that the error can be cleared. The error flag in the free list is protected by the nd 'lane', and is set only be a thread while it holds that lane. When the error is cleared, the flag is cleared, but while holding a mutex for that freelist index. When writing, we check for two things - 1/ If the freelist mutex is held or if the error flag is set. If so, this is an error block that is being (or about to be) cleared. 2/ If the block is a known badblock based on nsio->bb The second check is required because the BTT map error flag for a map entry only gets set when an error LBA is read. If we write to a new location that may not have the map error flag set, but still might be in the region's badblock list, we can trigger an EIO on the write, which is undesirable and completely avoidable. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31libnvdimm: fix potential deadlock while clearing errorsVishal Verma1-0/+6
With the ACPI NFIT 'DSM' methods, acpi can be called from IO paths. Specifically, the DSM to clear media errors is called during writes, so that we can provide a writes-fix-errors model. However it is easy to imagine a scenario like: -> write through the nvdimm driver -> acpi allocation -> writeback, causes more IO through the nvdimm driver -> deadlock Fix this by using memalloc_noio_{save,restore}, which sets the GFP_NOIO flag for the current scope when issuing commands/IOs that are expected to clear errors. Cc: <linux-acpi@vger.kernel.org> Cc: <linux-nvdimm@lists.01.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31libnvdimm, btt: cache sector_size in arena_infoVishal Verma2-0/+3
In preparation for the error clearing rework, add sector_size in the arena_info struct. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31libnvdimm, btt: ensure that flags were also unchanged during a map_readVishal Verma1-3/+7
In btt_map_read, we read the map twice to make sure that the map entry didn't change after we added it to the read tracking table. In anticipation of expanding the use of the error bit, also make sure that the error and zero flags are constant across the two map reads. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31libnvdimm, btt: refactor map entry operations with macrosVishal Verma2-4/+8
Add helpers for converting a raw map entry to just the block number, or either of the 'e' or 'z' flags in preparation for actually using the error flag to mark blocks with media errors. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write pathVishal Verma2-1/+3
The IO context conversion for rw_bytes missed a case in the BTT write path (btt_map_write) which should've been marked as atomic. In reality this should not cause a problem, because map writes are to small for nsio_rw_bytes to attempt error clearing, but it should be fixed for posterity. Add a might_sleep() in the non-atomic section of nsio_rw_bytes so that things like the nfit unit tests, which don't actually sleep, can catch bugs like this. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-30libnvdimm, btt: check memory allocation failureChristophe Jaillet1-0/+2
Check memory allocation failures and return -ENOMEM in such cases, as already done few lines below for another memory allocation. This avoids NULL pointers dereference. Cc: <stable@vger.kernel.org> Fixes: 14e494542636 ("libnvdimm, btt: BTT updates for UEFI 2.7 format") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-29libnvdimm, label: fix index block size calculationDan Williams2-15/+17
The old calculation assumed that the label space was 128k and the label size is 128. With v1.2 labels where the label size is 256 this calculation will return zero. We are saved by the fact that the nsindex_size is always pre-initialized from a previous 128 byte assumption and we are lucky that the index sizes turn out the same. Fix this going forward in case we start encountering different geometries of label areas besides 128k. Since the label size can change from one call to the next, drop the caching of nsindex_size. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig1-2/+2
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-15libnvdimm, pfn, dax: limit namespace alignments to the supported setDan Williams1-21/+2
Now that we properly advertise the supported pte, pmd, and pud sizes, restrict the supported alignments that can be set on a namespace. This assumes that userspace was not previously relying on the ability to set odd alignments. At least ndctl only ever supported setting the namespace alignment to 4K, 2M, or 1G. Cc: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-11libnvdimm, pfn, dax: show supported dax/pfn region alignments in sysfsOliver O'Halloran1-0/+31
The alignment of a DAX and PFN regions dictates the page sizes that can be used to map the region. Even if the hardware page sizes are known the actual range of supported page sizes that can be used with DAX depends on the kernel configuration. As a result it's best that the kernel advertises the alignments that should be used with these region types. This patch adds the 'supported_alignments' region attribute to expose this information to userspace. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> [djbw: integrate with nd_size_select_show() rename and other fixups] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-11libnvdimm: rename nd_sector_size_{show,store} to nd_size_select_{show,store}Dan Williams4-13/+13
Prepare for other another consumer of this size selection scheme that is not a 'sector size'. Cc: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-09block: pass in queue to inflight accountingJens Axboe1-2/+3
No functional change in this patch, just in preparation for basing the inflight mechanism on the queue in question. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-04nfit, libnvdimm, region: export 'position' in mapping infoDan Williams2-2/+5
It is useful to be able to know the position of a DIMM in an interleave-set. Consider the case where the order of the DIMMs changes causing a namespace to be invalidated because the interleave-set cookie no longer matches. If the before and after state of each DIMM position is known this state debugged by the system owner. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-25libnvdimm: Stop using HPAGE_SIZEOliver O'Halloran2-4/+12
Currently libnvdimm uses HPAGE_SIZE as the default alignment for DAX and PFN devices. HPAGE_SIZE is the default hugetlbfs page size and when hugetlbfs is disabled it defaults to PAGE_SIZE. Given DAX has more in common with THP than hugetlbfs we should proably be using HPAGE_PMD_SIZE, but this is undefined when THP is disabled so lets just give it a new name. The other usage of HPAGE_SIZE in libnvdimm is when determining how large the altmap should be. For the reasons mentioned above it doesn't really make sense to use HPAGE_SIZE here either. PMD_SIZE seems to be safe to use in generic code and it happens to match the vmemmap allocation block on x86 and Power. It's still a hack, but it's a slightly nicer hack. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-17libnvdimm: fix badblock range handling of ARS rangeToshi Kani1-3/+4
__add_badblock_range() does not account sector alignment when it sets 'num_sectors'. Therefore, an ARS error record range spanning across two sectors is set to a single sector length, which leaves the 2nd sector unprotected. Change __add_badblock_range() to set 'num_sectors' properly. Cc: <stable@vger.kernel.org> Fixes: 0caeef63e6d2 ("libnvdimm: Add a poison list and export badblocks") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-11Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds2-24/+8
Pull more block updates from Jens Axboe: "This is a followup for block changes, that didn't make the initial pull request. It's a bit of a mixed bag, this contains: - A followup pull request from Sagi for NVMe. Outside of fixups for NVMe, it also includes a series for ensuring that we properly quiesce hardware queues when browsing live tags. - Set of integrity fixes from Dmitry (mostly), fixing various issues for folks using DIF/DIX. - Fix for a bug introduced in cciss, with the req init changes. From Christoph. - Fix for a bug in BFQ, from Paolo. - Two followup fixes for lightnvm/pblk from Javier. - Depth fix from Ming for blk-mq-sched. - Also from Ming, performance fix for mtip32xx that was introduced with the dynamic initialization of commands" * 'for-linus' of git://git.kernel.dk/linux-block: (44 commits) block: call bio_uninit in bio_endio nvmet: avoid unneeded assignment of submit_bio return value nvme-pci: add module parameter for io queue depth nvme-pci: compile warnings in nvme_alloc_host_mem() nvmet_fc: Accept variable pad lengths on Create Association LS nvme_fc/nvmet_fc: revise Create Association descriptor length lightnvm: pblk: remove unnecessary checks lightnvm: pblk: control I/O flow also on tear down cciss: initialize struct scsi_req null_blk: fix error flow for shared tags during module_init block: Fix __blkdev_issue_zeroout loop nvme-rdma: unconditionally recycle the request mr nvme: split nvme_uninit_ctrl into stop and uninit virtio_blk: quiesce/unquiesce live IO when entering PM states mtip32xx: quiesce request queues to make sure no submissions are inflight nbd: quiesce request queues to make sure no submissions are inflight nvme: kick requeue list when requeueing a request instead of when starting the queues nvme-pci: quiesce/unquiesce admin_q instead of start/stop its hw queues nvme-loop: quiesce/unquiesce admin_q instead of start/stop its hw queues nvme-fc: quiesce/unquiesce admin_q instead of start/stop its hw queues ...
2017-07-07Merge tag 'libnvdimm-for-4.13' of ↵Linus Torvalds18-139/+815
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "libnvdimm updates for the latest ACPI and UEFI specifications. This pull request also includes new 'struct dax_operations' enabling to undo the abuse of copy_user_nocache() for copy operations to pmem. The dax work originally missed 4.12 to address concerns raised by Al. Summary: - Introduce the _flushcache() family of memory copy helpers and use them for persistent memory write operations on x86. The _flushcache() semantic indicates that the cache is either bypassed for the copy operation (movnt) or any lines dirtied by the copy operation are written back (clwb, clflushopt, or clflush). - Extend dax_operations with ->copy_from_iter() and ->flush() operations. These operations and other infrastructure updates allow all persistent memory specific dax functionality to be pushed into libnvdimm and the pmem driver directly. It also allows dax-specific sysfs attributes to be linked to a host device, for example: /sys/block/pmem0/dax/write_cache - Add support for the new NVDIMM platform/firmware mechanisms introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace label format, extensions to the address-range-scrub command set, new error injection commands, and a new BTT (block-translation-table) layout. These updates support inter-OS and pre-OS compatibility. - Fix a longstanding memory corruption bug in nfit_test. - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2) capable. - Miscellaneous fixes and small updates across libnvdimm and the nfit driver. Acknowledgements that came after the branch was pushed: commit 6aa734a2f38e ("libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani <toshi.kani@hpe.com>" * tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits) libnvdimm, namespace: record 'lbasize' for pmem namespaces acpi/nfit: Issue Start ARS to retrieve existing records libnvdimm: New ACPI 6.2 DSM functions acpi, nfit: Show bus_dsm_mask in sysfs libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru. acpi, nfit: Enable DSM pass thru for root functions. libnvdimm: passthru functions clear to send libnvdimm, btt: convert some info messages to warn/err libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime libnvdimm: fix the clear-error check in nsio_rw_bytes libnvdimm, btt: fix btt_rw_page not returning errors acpi, nfit: quiet invalid block-aperture-region warnings libnvdimm, btt: BTT updates for UEFI 2.7 format acpi, nfit: constify *_attribute_group libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region libnvdimm, pmem, dax: export a cache control attribute dax: convert to bitmask for flags dax: remove default copy_from_iter fallback libnvdimm, nfit: enable support for volatile ranges libnvdimm, pmem: fix persistence warning ...
2017-07-03Merge branch 'for-4.13/dax' into libnvdimm-for-nextDan Williams11-45/+107
2017-07-03libnvdimm, namespace: record 'lbasize' for pmem namespacesDan Williams1-0/+1
Commit f979b13c3cc5 "libnvdimm, label: honor the lba size specified in v1.2 labels") neglected to update the 'lbasize' in the label when the namespace sector_size attribute was written. We need this value in the label for inter-OS / pre-OS compatibility. Fixes: f979b13c3cc5 ("libnvdimm, label: honor the lba size specified in v1.2 labels") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-03block: guard bvec iteration logicDmitry Monakhov2-2/+4
Currently if some one try to advance bvec beyond it's size we simply dump WARN_ONCE and continue to iterate beyond bvec array boundaries. This simply means that we endup dereferencing/corrupting random memory region. Sane reaction would be to propagate error back to calling context But bvec_iter_advance's calling context is not always good for error handling. For safity reason let truncate iterator size to zero which will break external iteration loop which prevent us from unpredictable memory range corruption. And even it caller ignores an error, it will corrupt it's own bvecs, not others. This patch does: - Return error back to caller with hope that it will react on this - Truncate iterator size Code was added long time ago here 4550dd6c, luckily no one hit it in real life :) Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> [hch: switch to true/false returns instead of errno values] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-03bio-integrity: fold bio_integrity_enabled to bio_integrity_prepDmitry Monakhov2-22/+4
Currently all integrity prep hooks are open-coded, and if prepare fails we ignore it's code and fail bio with EIO. Let's return real error to upper layer, so later caller may react accordingly. In fact no one want to use bio_integrity_prep() w/o bio_integrity_enabled, so it is reasonable to fold it in to one function. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> [hch: merged with the latest block tree, return bool from bio_integrity_prep] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-01libnvdimm: passthru functions clear to sendJerry Hoemann1-1/+3
Have dsm functions called via the pass thru mechanism also be checked against clear to send. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-01libnvdimm, btt: convert some info messages to warn/errVishal Verma1-4/+4
Some critical messages such as IO errors, metadata failures were printed with dev_info. Make them louder by upgrading them to dev_warn or dev_error. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-30libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetimeDan Williams2-8/+21
We need to hold a reference on the 'dirent' until we are sure there are no more notifications that will be sent. As noted in the new comments we take advantage of the fact that the references are taken and dropped under device_lock() and that nd_device_notify() holds device_lock() over new badblocks notifications. The notifications that happen when badblocks are cleared only occur while the device is active. Also take the opportunity to fix up the error messages to report the user visible effect of a sysfs_get_dirent() failure. Fixes: 975750a98c26 ("libnvdimm, pmem: Add sysfs notifications to badblocks") Cc: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-30libnvdimm: fix the clear-error check in nsio_rw_bytesVishal Verma1-2/+1
A leftover from the 'bandaid' fix that disabled BTT error clearing in rw_bytes resulted in an incorrect check. After we converted these checks over to use the NVDIMM_IO_ATOMIC flag, the ndns->claim check was both redundant, and incorrect. Remove it. Fixes: 3ae3d67ba705 ("libnvdimm: add an atomic vs process context flag to rw_bytes") Cc: <stable@vger.kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-29libnvdimm, btt: fix btt_rw_page not returning errorsVishal Verma1-3/+6
btt_rw_page was not propagating errors frm btt_do_bvec, resulting in any IO errors via the rw_page path going unnoticed. the pmem driver recently fixed this in e10624f pmem: fail io-requests to known bad blocks but same problem in BTT went neglected. Fixes: 5212e11fde4d ("nd_btt: atomic sector updates") Cc: <stable@vger.kernel.org> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-29acpi, nfit: quiet invalid block-aperture-region warningsDan Williams1-1/+1
This state is already visible by userspace since the BLK region will not be enabled, and it is otherwise benign as it usually indicates that the DIMM is not configured. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-29libnvdimm, btt: BTT updates for UEFI 2.7 formatVishal Verma8-15/+133
The UEFI 2.7 specification defines an updated BTT metadata format, bumping the revision to 2.0. Add support for the new format, while retaining compatibility for the old 1.1 format. Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Linda Knippers <linda.knippers@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-29libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile regionDan Williams2-5/+14
The pmem driver attaches to both persistent and volatile memory ranges advertised by the ACPI NFIT. When the region is volatile it is redundant to spend cycles flushing caches at fsync(). Check if the hosting region is volatile and do not set dax_write_cache() if it is. Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-29libnvdimm, pmem, dax: export a cache control attributeDan Williams1-0/+10
The dax_flush() operation can be turned into a nop on platforms where firmware arranges for cpu caches to be flushed on a power-fail event. The ACPI 6.2 specification defines a mechanism for the platform to indicate this capability so the kernel can select the proper default. However, for other platforms, the administrator must toggle this setting manually. Given this flush setting is a dax-specific mechanism we advertise it through a 'dax' attribute group hanging off a host device. For example, a 'pmem0' block-device gets a 'dax' sysfs-subdirectory with a 'write_cache' attribute to control response to dax cache flush requests. This is similar to the 'queue/write_cache' attribute that appears under block devices. Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-27libnvdimm, nfit: enable support for volatile rangesDan Williams8-26/+36
Allow volatile nfit ranges to participate in all the same infrastructure provided for persistent memory regions. A resulting resulting namespace device will still be called "pmem", but the parent region type will be "nd_volatile". This is in preparation for disabling the dax ->flush() operation in the pmem driver when it is hosted on a volatile range. Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-27libnvdimm, pmem: fix persistence warningDan Williams1-2/+3
The pmem driver assumes if platform firmware describes the memory devices associated with a persistent memory range and CONFIG_ARCH_HAS_PMEM_API=y that it has all the mechanism necessary to flush data to a power-fail safe zone. We warn if the firmware does not describe memory devices, but we also need to warn if the architecture does not claim pmem support. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-27x86, libnvdimm, pmem: remove global pmem apiDan Williams6-8/+11
Now that all callers of the pmem api have been converted to dax helpers that call back to the pmem driver, we can remove include/linux/pmem.h and asm/pmem.h. Cc: <x86@kernel.org> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Oliver O'Halloran <oohall@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-27x86, libnvdimm, pmem: move arch_invalidate_pmem() to libnvdimmDan Williams3-2/+7
Kill this globally defined wrapper and move to libnvdimm so that we can ultimately remove include/linux/pmem.h and asm/pmem.h. Cc: <x86@kernel.org> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-27block: don't bother with bounce limits for make_request driversChristoph Hellwig3-3/+0
We only call blk_queue_bounce for request-based drivers, so stop messing with it for make_request based drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-15x86, dax, libnvdimm: remove wb_cache_pmem() indirectionDan Williams2-1/+9
With all handling of the CONFIG_ARCH_HAS_PMEM_API case being moved to libnvdimm and the pmem driver directly we do not need to provide global wrappers and fallbacks in the CONFIG_ARCH_HAS_PMEM_API=n case. The pmem driver will simply not link to arch_wb_cache_pmem() in that case. Same as before, pmem flushing is only defined for x86_64, via clean_cache_range(), but it is straightforward to add other archs in the future. arch_wb_cache_pmem() is an exported function since the pmem module needs to find it, but it is privately declared in drivers/nvdimm/pmem.h because there are no consumers outside of the pmem driver. Cc: <x86@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oliver O'Halloran <oohall@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-15dax, pmem: introduce an optional 'flush' dax_operationDan Williams1-0/+7
Filesystem-DAX flushes caches whenever it writes to the address returned through dax_direct_access() and when writing back dirty radix entries. That flushing is only required in the pmem case, so add a dax operation to allow pmem to take this extra action, but skip it for other dax capable devices that do not provide a flush routine. An example for this differentiation might be a volatile ram disk where there is no expectation of persistence. In fact the pmem driver itself might front such an address range specified by the NFIT. So, this "no flush" property might be something passed down by the bus / libnvdimm. Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-15libnvdimm, pmem: Add sysfs notifications to badblocksToshi Kani5-2/+29
Sysfs "badblocks" information may be updated during run-time that: - MCE, SCI, and sysfs "scrub" may add new bad blocks - Writes and ioctl() may clear bad blocks Add support to send sysfs notifications to sysfs "badblocks" file under region and pmem directories when their badblocks information is re-evaluated (but is not necessarily changed) during run-time. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>