summaryrefslogtreecommitdiffstats
path: root/drivers/nvdimm/region_devs.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-11nvdimm/region: Delete nd_blk_region infrastructureDan Williams1-140/+18
Now that the nd_namespace_blk infrastructure is removed, delete all the region machinery to coordinate provisioning aliased capacity between PMEM and BLK. Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/164688418803.2879318.1302315202397235855.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-03-11nvdimm/region: Fix default alignment for small regionsDan Williams1-0/+3
In preparation for removing BLK aperture support the NVDIMM unit tests discovered that the default alignment can be set higher than the capacity of the region. Fall back to PAGE_SIZE in that case. Given this has not been seen in the wild, elide notifying -stable. Fixes: 2522afb86a8c ("libnvdimm/region: Introduce an 'align' attribute") Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/164688416128.2879318.17890707310125575258.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-04-09libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNCVaibhav Jain1-2/+7
In case a platform doesn't provide explicit flush-hints but provides an explicit flush callback via ND_REGION_ASYNC region flag, then nvdimm_has_flush() still returns '0' indicating that writes do not require flushing. This happens on PPC64 with patch at [1] applied, where 'deep_flush' of a region was denied even though an explicit flush function was provided. Fix this by adding a condition to nvdimm_has_flush() to test for the ND_REGION_ASYNC flag on the region and see if a 'region->flush' callback is assigned. Link: http://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87 [1] Fixes: c5d4355d10d4 ("libnvdimm: nd_region flush callback support") Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Link: https://lore.kernel.org/r/20210402092555.208590-1-vaibhav@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-04-08libnvdimm: Notify disk drivers to revalidate region read-onlyDan Williams1-0/+7
Previous kernels allowed the BLKROSET to override the disk's read-only status. With that situation fixed the pmem driver needs to rely on notification events to reevaluate the disk read-only status after the host region has been marked read-write. Recall that when libnvdimm determines that the persistent memory has lost persistence (for example lack of energy to flush from DRAM to FLASH on an NVDIMM-N device) it marks the region read-only, but that state can be overridden by the user via: echo 0 > /sys/bus/nd/devices/regionX/read_only ...to date there is no notification that the region has restored persistence, so the user override is the only recovery. Fixes: 52f019d43c22 ("block: add a hard-readonly flag to struct gendisk") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Tested-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/161534060720.528671.2341213328968989192.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-08-11Merge tag 'libnvdimm-for-5.9' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updayes from Vishal Verma: "You'd normally receive this pull request from Dan Williams, but he's busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm this cycle. This adds a new feature in libnvdimm - 'Runtime Firmware Activation', and a few small cleanups and fixes in libnvdimm and DAX. I'd originally intended to make separate topic-based pull requests - one for libnvdimm, and one for DAX, but some of the DAX material fell out since it wasn't quite ready. Summary: - add 'Runtime Firmware Activation' support for NVDIMMs that advertise the relevant capability - misc libnvdimm and DAX cleanups" * tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr libnvdimm/security: the 'security' attr never show 'overwrite' state libnvdimm/security: fix a typo ACPI: NFIT: Fix ARS zero-sized allocation dax: Fix incorrect argument passed to xas_set_err() ACPI: NFIT: Add runtime firmware activate support PM, libnvdimm: Add runtime firmware activation support libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO() drivers/dax: Expand lock scope to cover the use of addresses fs/dax: Remove unused size parameter dax: print error message by pr_info() in __generic_fsdax_supported() driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW} tools/testing/nvdimm: Emulate firmware activation commands tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation tools/testing/nvdimm: Add command debug messages tools/testing/nvdimm: Cleanup dimm index passing ACPI: NFIT: Define runtime firmware activation commands ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor libnvdimm: Validate command family indices
2020-07-28libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO()Dan Williams1-1/+1
Move libnvdimm sysfs attributes that currently use an open coded DEVICE_ATTR() to hide sensitive root-only information (physical memory layout) to the new DEVICE_ATTR_ADMIN_RO() helper. Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-16libnvdimm/nvdimm/flush: Allow architecture to override the flush barrierAneesh Kumar K.V1-4/+4
Architectures like ppc64 provide persistent memory specific barriers that will ensure that all stores for which the modifications are written to persistent storage by preceding dcbfps and dcbstps instructions have updated persistent storage before any data access or data transfer caused by subsequent instructions is initiated. This is in addition to the ordering done by wmb() Update nvdimm core such that architecture can use barriers other than wmb to ensure all previous writes are architecturally visible for the platform buffer flush. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200701072235.223558-5-aneesh.kumar@linux.ibm.com
2020-06-17nvdimm/region: always show the 'align' attributeVishal Verma1-12/+2
It is possible that a platform that is capable of 'namespace labels' comes up without the labels properly initialized. In this case, the region's 'align' attribute is hidden. Howerver, once the user does initialize he labels, the 'align' attribute still stays hidden, which is unexpected. The sysfs_update_group() API is meant to address this, and could be called during region probe, but it has entanglements with the device 'lockdep_mutex'. Therefore, simply make the 'align' attribute always visible. It doesn't matter what it says for label-less namespaces, since it is not possible to change their allocation anyway. Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20200520225026.29426-1-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-03-31libnvdimm/region: Fix build errorYueHaibing1-5/+3
On CONFIG_PPC32=y build fails: drivers/nvdimm/region_devs.c:1034:14: note: in expansion of macro ‘do_div’ remainder = do_div(per_mapping, mappings); ^~~~~~ In file included from ./arch/powerpc/include/generated/asm/div64.h:1:0, from ./include/linux/kernel.h:18, from ./include/asm-generic/bug.h:19, from ./arch/powerpc/include/asm/bug.h:109, from ./include/linux/bug.h:5, from ./include/linux/scatterlist.h:7, from drivers/nvdimm/region_devs.c:5: ./include/asm-generic/div64.h:243:22: error: passing argument 1 of ‘__div64_32’ from incompatible pointer type [-Werror=incompatible-pointer-types] __rem = __div64_32(&(n), __base); \ Use div_u64 instead of do_div to fix this. Fixes: 2522afb86a8c ("libnvdimm/region: Introduce an 'align' attribute") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200331115024.31628-1-yuehaibing@huawei.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-03-17libnvdimm/region: Introduce an 'align' attributeDan Williams1-9/+113
The align attribute applies an alignment constraint for namespace creation in a region. Whereas the 'align' attribute of a namespace applied alignment padding via an info block, the 'align' attribute applies alignment constraints to the free space allocation. The default for 'align' is the maximum known memremap_compat_align() across all archs (16MiB from PowerPC at time of writing) multiplied by the number of interleave ways if there is blk-aliasing. The minimum is PAGE_SIZE and allows for the creation of cross-arch incompatible namespaces, just as previous kernels allowed, but the expectation is cross-arch and mode-independent compatibility by default. The regression risk with this change is limited to cases that were dependent on the ability to create unaligned namespaces, *and* for some reason are unable to opt-out of aligned namespaces by writing to 'regionX/align'. If such a scenario arises the default can be flipped from opt-out to opt-in of compat-aligned namespace creation, but that is a last resort. The kernel will otherwise continue to support existing defined misaligned namespaces. Unfortunately this change needs to touch several parts of the implementation at once: - region/available_size: expand busy extents to current align - region/max_available_extent: expand busy extents to current align - namespace/size: trim free space to current align ...to keep the free space accounting conforming to the dynamic align setting. Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Link: https://lore.kernel.org/r/158041478371.3889308.14542630147672668068.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-03-17libnvdimm/region: Introduce NDD_LABELINGDan Williams1-5/+5
The NDD_ALIASING flag is used to indicate where pmem capacity might alias with blk capacity and require labeling. It is also used to indicate whether the DIMM supports labeling. Separate this latter capability into its own flag so that the NDD_ALIASING flag is scoped to true aliased configurations. To my knowledge aliased configurations only exist in the ACPI spec, there are no known platforms that ship this support in production. This clarity allows namespace-capacity alignment constraints around interleave-ways to be relaxed. Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/158041477856.3889308.4212605617834097674.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-12-01Merge tag 'libnvdimm-for-5.5' of ↵Linus Torvalds1-115/+120
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The highlight this cycle is continuing integration fixes for PowerPC and some resulting optimizations. Summary: - Updates to better support vmalloc space restrictions on PowerPC platforms. - Cleanups to move common sysfs attributes to core 'struct device_type' objects. - Export the 'target_node' attribute (the effective numa node if pmem is marked online) for regions and namespaces. - Miscellaneous fixups and optimizations" * tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) MAINTAINERS: Remove Keith from NVDIMM maintainers libnvdimm: Export the target_node attribute for regions and namespaces dax: Add numa_node to the default device-dax attributes libnvdimm: Simplify root read-only definition for the 'resource' attribute dax: Simplify root read-only definition for the 'resource' attribute dax: Create a dax device_type libnvdimm: Move nvdimm_bus_attribute_group to device_type libnvdimm: Move nvdimm_attribute_group to device_type libnvdimm: Move nd_mapping_attribute_group to device_type libnvdimm: Move nd_region_attribute_group to device_type libnvdimm: Move nd_numa_attribute_group to device_type libnvdimm: Move nd_device_attribute_group to device_type libnvdimm: Move region attribute group definition libnvdimm: Move attribute groups to device type libnvdimm: Remove prototypes for nonexistent functions libnvdimm/btt: fix variable 'rc' set but not used libnvdimm/pmem: Delete include of nd-core.h libnvdimm/namespace: Differentiate between probe mapping and runtime mapping libnvdimm/pfn_dev: Don't clear device memmap area during generic namespace probe libnvdimm: Trivial comment fix ...
2019-11-19libnvdimm: Simplify root read-only definition for the 'resource' attributeDan Williams1-7/+3
Rather than update the permission in ->is_visible() set the permission directly at declaration time. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157309905534.1582359.13927459228885931097.stgit@dwillia2-desk3.amr.corp.intel.com
2019-11-19libnvdimm: Move nd_mapping_attribute_group to device_typeDan Williams1-2/+2
A 'struct device_type' instance can carry default attributes for the device. Use this facility to remove the export of nd_mapping_attribute_group and put the responsibility on the core rather than leaf implementations to define this attribute. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157309902686.1582359.6749533709859492704.stgit@dwillia2-desk3.amr.corp.intel.com
2019-11-19libnvdimm: Move nd_region_attribute_group to device_typeDan Williams1-2/+2
A 'struct device_type' instance can carry default attributes for the device. Use this facility to remove the export of nd_region_attribute_group and put the responsibility on the core rather than leaf implementations to define this attribute. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157309902169.1582359.16828508538444551337.stgit@dwillia2-desk3.amr.corp.intel.com
2019-11-19libnvdimm: Move nd_numa_attribute_group to device_typeDan Williams1-0/+1
A 'struct device_type' instance can carry default attributes for the device. Use this facility to remove the export of nd_numa_attribute_group and put the responsibility on the core rather than leaf implementations to define this attribute. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157401269537.43284.14411189404186877352.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-11-17libnvdimm: Move nd_device_attribute_group to device_typeDan Williams1-5/+13
A 'struct device_type' instance can carry default attributes for the device. Use this facility to remove the export of nd_device_attribute_group and put the responsibility on the core rather than leaf implementations to define this attribute. For regions this creates a new nd_region_attribute_groups[] added to the per-region device-type instances. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157309901138.1582359.12909354140826530394.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-11-17libnvdimm: Move region attribute group definitionDan Williams1-104/+104
In preparation for moving region attributes from device attribute groups to the region device-type, reorder the declaration so that it can be referenced by the device-type definition without forward declarations. No functional changes are intended to result from this change. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/157309900624.1582359.6929998072035982264.stgit@dwillia2-desk3.amr.corp.intel.com
2019-11-07lib: Uplevel the pmem "region" ida to a global allocatorDan Williams1-9/+4
In preparation for handling platform differentiated memory types beyond persistent memory, uplevel the "region" identifier to a global number space. This enables a device-dax instance to be registered to any memory type with guaranteed unique names. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-09-24libnvdimm/region: Enable MAP_SYNC for volatile regionsAneesh Kumar K.V1-0/+3
Some environments want to use a host tmpfs/ramdisk to back guest pmem. While the data is not persisted relative to the host it *is* persisted relative to guest crashes / reboots. The guest is free to use dax and MAP_SYNC to keep filesystem metadata consistent with dax accesses without requiring guest fsync(). The guest can also observe that the region is volatile and skip cache flushing as global visibility is enough to "persist" data relative to the host staying alive over guest reset events. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Link: https://lore.kernel.org/r/20190924114327.14700-1-aneesh.kumar@linux.ibm.com [djbw: reword the changelog] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-24libnvdimm/region: Initialize bad block for volatile namespacesAneesh Kumar K.V1-2/+2
We do check for a bad block during namespace init and that use region bad block list. We need to initialize the bad block for volatile regions for this to work. We also observe a lockdep warning as below because the lock is not initialized correctly since we skip bad block init for volatile regions. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc1-15699-g3dee241c937e #149 Call Trace: [c0000000f95cb250] [c00000000147dd84] dump_stack+0xe8/0x164 (unreliable) [c0000000f95cb2a0] [c00000000022ccd8] register_lock_class+0x308/0xa60 [c0000000f95cb3a0] [c000000000229cc0] __lock_acquire+0x170/0x1ff0 [c0000000f95cb4c0] [c00000000022c740] lock_acquire+0x220/0x270 [c0000000f95cb580] [c000000000a93230] badblocks_check+0xc0/0x290 [c0000000f95cb5f0] [c000000000d97540] nd_pfn_validate+0x5c0/0x7f0 [c0000000f95cb6d0] [c000000000d98300] nd_dax_probe+0xd0/0x1f0 [c0000000f95cb760] [c000000000d9b66c] nd_pmem_probe+0x10c/0x160 [c0000000f95cb790] [c000000000d7f5ec] nvdimm_bus_probe+0x10c/0x240 [c0000000f95cb820] [c000000000d0f844] really_probe+0x254/0x4e0 [c0000000f95cb8b0] [c000000000d0fdfc] driver_probe_device+0x16c/0x1e0 [c0000000f95cb930] [c000000000d10238] device_driver_attach+0x68/0xa0 [c0000000f95cb970] [c000000000d1040c] __driver_attach+0x19c/0x1c0 [c0000000f95cb9f0] [c000000000d0c4c4] bus_for_each_dev+0x94/0x130 [c0000000f95cba50] [c000000000d0f014] driver_attach+0x34/0x50 [c0000000f95cba70] [c000000000d0e208] bus_add_driver+0x178/0x2f0 [c0000000f95cbb00] [c000000000d117c8] driver_register+0x108/0x170 [c0000000f95cbb70] [c000000000d7edb0] __nd_driver_register+0xe0/0x100 [c0000000f95cbbd0] [c000000001a6baa4] nd_pmem_driver_init+0x34/0x48 [c0000000f95cbbf0] [c0000000000106f4] do_one_initcall+0x1d4/0x4b0 [c0000000f95cbcd0] [c0000000019f499c] kernel_init_freeable+0x544/0x65c [c0000000f95cbdb0] [c000000000010d6c] kernel_init+0x2c/0x180 [c0000000f95cbe20] [c00000000000b954] ret_from_kernel_thread+0x5c/0x68 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/20190919083355.26340-1-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-05libnvdimm: Use PAGE_SIZE instead of SZ_4K for align checkAneesh Kumar K.V1-4/+4
Architectures have different page size than 4K. Use the PAGE_SIZE to make sure ranges are correctly aligned. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/20190905154603.10349-7-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-05libnvdimm/region: Rewrite _probe_success() to _advance_seeds()Dan Williams1-58/+10
The nd_region_probe_success() helper collides seed management with nvdimm->busy tracking. Given the 'busy' increment is handled internal to the nd_region driver 'probe' path move the decrement to the 'remove' path. With that cleanup the routine can be renamed to the more descriptive nd_region_advance_seeds(). The change is prompted by an incoming need to optionally advance the seeds on other events besides 'probe' success. Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/20190905154603.10349-2-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-08-29libnvdimm, region: Use struct_size() in kzalloc()Gustavo A. R. Silva1-4/+3
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct nd_region { ... struct nd_mapping mapping[0]; }; instance = kzalloc(sizeof(struct nd_region) + sizeof(struct nd_mapping) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, mapping, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20190610210613.GA21989@embeddedor Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-27Merge tag 'libnvdimm-fixes-5.3-rc2' of ↵Linus Torvalds1-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A collection of locking and async operations fixes for v5.3-rc2. These had been soaking in a branch targeting the merge window, but missed due to a regression hunt. This fixed up version has otherwise been in -next this past week with no reported issues. In order to gain confidence in the locking changes the pull also includes a debug / instrumentation patch to enable lockdep coverage for libnvdimm subsystem operations that depend on the device_lock for exclusion. As mentioned in the changelog it is a hack, but it works and documents the locking expectations of the sub-system in a way that others can use lockdep to verify. The driver core touches got an ack from Greg. Summary: - Fix duplicate device_unregister() calls (multiple threads competing to do unregister work when scheduling device removal from a sysfs attribute of the self-same device). - Fix badblocks registration order bug. Ensure region badblocks are initialized in advance of namespace registration. - Fix a deadlock between the bus lock and probe operations. - Export device-core infrastructure to coordinate async operations via the device ->dead state. - Add device-core infrastructure to validate device_lock() usage with lockdep" * tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: driver-core, libnvdimm: Let device subsystems add local lockdep coverage libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl() libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant libnvdimm/region: Register badblocks before namespaces libnvdimm/bus: Prevent duplicate device_unregister() calls drivers/base: Introduce kill_device()
2019-07-18driver-core, libnvdimm: Let device subsystems add local lockdep coverageDan Williams1-8/+8
For good reason, the standard device_lock() is marked lockdep_set_novalidate_class() because there is simply no sane way to describe the myriad ways the device_lock() ordered with other locks. However, that leaves subsystems that know their own local device_lock() ordering rules to find lock ordering mistakes manually. Instead, introduce an optional / additional lockdep-enabled lock that a subsystem can acquire in all the same paths that the device_lock() is acquired. A conversion of the NFIT driver and NVDIMM subsystem to a lockdep-validate device_lock() scheme is included. The debug_nvdimm_lock() implementation implements the correct lock-class and stacking order for the libnvdimm device topology hierarchy. Yes, this is a hack, but hopefully it is a useful hack for other subsystems device_lock() debug sessions. Quoting Greg: "Yeah, it feels a bit hacky but it's really up to a subsystem to mess up using it as much as anything else, so user beware :) I don't object to it if it makes things easier for you to debug." Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/156341210661.292348.7014034644265455704.stgit@dwillia2-desk3.amr.corp.intel.com
2019-07-18libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlockDan Williams1-0/+4
A multithreaded namespace creation/destruction stress test currently deadlocks with the following lockup signature: INFO: task ndctl:2924 blocked for more than 122 seconds. Tainted: G OE 5.2.0-rc4+ #3382 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ndctl D 0 2924 1176 0x00000000 Call Trace: ? __schedule+0x27e/0x780 schedule+0x30/0xb0 wait_nvdimm_bus_probe_idle+0x8a/0xd0 [libnvdimm] ? finish_wait+0x80/0x80 uuid_store+0xe6/0x2e0 [libnvdimm] kernfs_fop_write+0xf0/0x1a0 vfs_write+0xb7/0x1b0 ksys_write+0x5c/0xd0 do_syscall_64+0x60/0x240 INFO: task ndctl:2923 blocked for more than 122 seconds. Tainted: G OE 5.2.0-rc4+ #3382 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ndctl D 0 2923 1175 0x00000000 Call Trace: ? __schedule+0x27e/0x780 ? __mutex_lock+0x489/0x910 schedule+0x30/0xb0 schedule_preempt_disabled+0x11/0x20 __mutex_lock+0x48e/0x910 ? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm] ? __lock_acquire+0x23f/0x1710 ? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm] nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm] __dax_pmem_probe+0x5e/0x210 [dax_pmem_core] ? nvdimm_bus_probe+0x1d0/0x2c0 [libnvdimm] dax_pmem_probe+0xc/0x20 [dax_pmem] nvdimm_bus_probe+0x90/0x2c0 [libnvdimm] really_probe+0xef/0x390 driver_probe_device+0xb4/0x100 In this sequence an 'nd_dax' device is being probed and trying to take the lock on its backing namespace to validate that the 'nd_dax' device indeed has exclusive access to the backing namespace. Meanwhile, another thread is trying to update the uuid property of that same backing namespace. So one thread is in the probe path trying to acquire the lock, and the other thread has acquired the lock and tries to flush the probe path. Fix this deadlock by not holding the namespace device_lock over the wait_nvdimm_bus_probe_idle() synchronization step. In turn this requires the device_lock to be held on entry to wait_nvdimm_bus_probe_idle() and subsequently dropped internally to wait_nvdimm_bus_probe_idle(). Cc: <stable@vger.kernel.org> Fixes: bf9bccc14c05 ("libnvdimm: pmem label sets and namespace instantiation") Cc: Vishal Verma <vishal.l.verma@intel.com> Tested-by: Jane Chu <jane.chu@oracle.com> Link: https://lore.kernel.org/r/156341210094.292348.2384694131126767789.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-05libnvdimm: add dax_dev sync flagPankaj Gupta1-0/+7
This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-05libnvdimm: nd_region flush callback supportPankaj Gupta1-2/+24
This patch adds functionality to perform flush from guest to host over VIRTIO. We are registering a callback based on 'nd_region' type. virtio_pmem driver requires this special flush function. For rest of the region types we are registering existing flush function. Report error returned by host fsync failure to userspace. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-16Merge tag 'devdax-for-5.1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull device-dax updates from Dan Williams: "New device-dax infrastructure to allow persistent memory and other "reserved" / performance differentiated memories, to be assigned to the core-mm as "System RAM". Some users want to use persistent memory as additional volatile memory. They are willing to cope with potential performance differences, for example between DRAM and 3D Xpoint, and want to use typical Linux memory management apis rather than a userspace memory allocator layered over an mmap() of a dax file. The administration model is to decide how much Persistent Memory (pmem) to use as System RAM, create a device-dax-mode namespace of that size, and then assign it to the core-mm. The rationale for device-dax is that it is a generic memory-mapping driver that can be layered over any "special purpose" memory, not just pmem. On subsequent boots udev rules can be used to restore the memory assignment. One implication of using pmem as RAM is that mlock() no longer keeps data off persistent media. For this reason it is recommended to enable NVDIMM Security (previously merged for 5.0) to encrypt pmem contents at rest. We considered making this recommendation an actively enforced requirement, but in the end decided to leave it as a distribution / administrator policy to allow for emulation and test environments that lack security capable NVDIMMs. Summary: - Replace the /sys/class/dax device model with /sys/bus/dax, and include a compat driver so distributions can opt-in to the new ABI. - Allow for an alternative driver for the device-dax address-range - Introduce the 'kmem' driver to hotplug / assign a device-dax address-range to the core-mm. - Arrange for the device-dax target-node to be onlined so that the newly added memory range can be uniquely referenced by numa apis" NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because we currently have special - and very annoying rules in the kernel about accessing PMEM only with the "MC safe" accessors, because machine checks inside the regular repeat string copy functions can be fatal in some (not described) circumstances. And apparently the PMEM modules can cause that a lot more than regular RAM. The argument is that this happens because PMEM doesn't necessarily get scrubbed at boot like RAM does, but that is planned to be added for the user space tooling. Quoting Dan from another email: "The exposure can be reduced in the volatile-RAM case by scanning for and clearing errors before it is onlined as RAM. The userspace tooling for that can be in place before v5.1-final. There's also runtime notifications of errors via acpi_nfit_uc_error_notify() from background scrubbers on the DIMM devices. With that mechanism the kernel could proactively clear newly discovered poison in the volatile case, but that would be additional development more suitable for v5.2. I understand the concern, and the need to highlight this issue by tapping the brakes on feature development, but I don't see PMEM as RAM making the situation worse when the exposure is also there via DAX in the PMEM case. Volatile-RAM is arguably a safer use case since it's possible to repair pages where the persistent case needs active application coordination" * tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: "Hotplug" persistent memory for use like normal RAM mm/resource: Let walk_system_ram_range() search child resources mm/memory-hotplug: Allow memory resources to be children mm/resource: Move HMM pr_debug() deeper into resource code mm/resource: Return real error codes from walk failures device-dax: Add a 'modalias' attribute to DAX 'bus' devices device-dax: Add a 'target_node' attribute device-dax: Auto-bind device after successful new_id acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node device-dax: Add /sys/class/dax backwards compatibility device-dax: Add support for a dax override driver device-dax: Move resource pinning+mapping into the common driver device-dax: Introduce bus + driver model device-dax: Start defining a dax bus model device-dax: Remove multi-resource infrastructure device-dax: Kill dax_region base device-dax: Kill dax_region ida
2019-02-02libnvdimm/dimm: Add a no-BLK quirk based on NVDIMM familyDan Williams1-0/+7
As Dexuan reports the NVDIMM_FAMILY_HYPERV platform is incompatible with the existing Linux namespace implementation because it uses NSLABEL_FLAG_LOCAL for x1-width PMEM interleave sets. Quirk it as an platform / DIMM that does not provide BLK-aperture access. Allow the libnvdimm core to assume no potential for aliasing. In case other implementations make the same mistake, provide a "noblk" module parameter to force-enable the quirk. Link: https://lkml.kernel.org/r/PU1P153MB0169977604493B82B662A01CBF920@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM Reported-by: Dexuan Cui <decui@microsoft.com> Tested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-06acpi/nfit, device-dax: Identify differentiated memory with a unique numa-nodeDan Williams1-0/+1
Persistent memory, as described by the ACPI NFIT (NVDIMM Firmware Interface Table), is the first known instance of a memory range described by a unique "target" proximity domain. Where "initiator" and "target" proximity domains is an approach that the ACPI HMAT (Heterogeneous Memory Attributes Table) uses to described the unique performance properties of a memory range relative to a given initiator (e.g. CPU or DMA device). Currently the numa-node for a /dev/pmemX block-device or /dev/daxX.Y char-device follows the traditional notion of 'numa-node' where the attribute conveys the closest online numa-node. That numa-node attribute is useful for cpu-binding and memory-binding processes *near* the device. However, when the memory range backing a 'pmem', or 'dax' device is onlined (memory hot-add) the memory-only-numa-node representing that address needs to be differentiated from the set of online nodes. In other words, the numa-node association of the device depends on whether you can bind processes *near* the cpu-numa-node in the offline device-case, or bind process *on* the memory-range directly after the backing address range is onlined. Allow for the case that platform firmware describes persistent memory with a unique proximity domain, i.e. when it is distinct from the proximity of DRAM and CPUs that are on the same socket. Plumb the Linux numa-node translation of that proximity through the libnvdimm region device to namespaces that are in device-dax mode. With this in place the proposed kmem driver [1] can optionally discover a unique numa-node number for the address range as it transitions the memory from an offline state managed by a device-driver to an online memory range managed by the core-mm. [1]: https://lore.kernel.org/lkml/20181022201317.8558C1D8@viggo.jf.intel.com Reported-by: Fan Du <fan.du@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-27Merge miscellaneous libnvdimm updates for 4.21Dan Williams1-0/+41
* Use common helpers, bitmap_zalloc() and kstrndup(), to replace open coded versions. * Clarify the comments around hotplug vs initial init case for the nfit driver. * Cleanup the libnvdimm init path.
2018-12-21acpi/nfit, libnvdimm/security: Add security DSM overwrite supportDave Jiang1-0/+5
Add support for the NVDIMM_FAMILY_INTEL "ovewrite" capability as described by the Intel DSM spec v1.7. This will allow triggering of overwrite on Intel NVDIMMs. The overwrite operation can take tens of minutes. When the overwrite DSM is issued successfully, the NVDIMMs will be unaccessible. The kernel will do backoff polling to detect when the overwrite process is completed. According to the DSM spec v1.7, the 128G NVDIMMs can take up to 15mins to perform overwrite and larger DIMMs will take longer. Given that overwrite puts the DIMM in an indeterminate state until it completes introduce the NDD_SECURITY_OVERWRITE flag to prevent other operations from executing when overwrite is happening. The NDD_WORK_PENDING flag is added to denote that there is a device reference on the nvdimm device for an async workqueue thread context. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-05libnvdimm, pfn: Pad pfn namespaces relative to other regionsDan Williams1-0/+41
Commit cfe30b872058 "libnvdimm, pmem: adjust for section collisions with 'System RAM'" enabled Linux to workaround occasions where platform firmware arranges for "System RAM" and "Persistent Memory" to collide within a single section boundary. Unfortunately, as reported in this issue [1], platform firmware can inflict the same collision between persistent memory regions. The approach of interrogating iomem_resource does not work in this case because platform firmware may merge multiple regions into a single iomem_resource range. Instead provide a method to interrogate regions that share the same parent bus. This is a stop-gap until the core-MM can grow support for hotplug on sub-section boundaries. [1]: https://github.com/pmem/ndctl/issues/76 Fixes: cfe30b872058 ("libnvdimm, pmem: adjust for section collisions with...") Cc: <stable@vger.kernel.org> Reported-by: Patrick Geary <patrickg@supermicro.com> Tested-by: Patrick Geary <patrickg@supermicro.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-09-28libnvdimm, region: Fail badblocks listing for inactive regionsDan Williams1-2/+9
While experimenting with region driver loading the following backtrace was triggered: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [..] Call Trace: dump_stack+0x85/0xcb register_lock_class+0x571/0x580 ? __lock_acquire+0x2ba/0x1310 ? kernfs_seq_start+0x2a/0x80 __lock_acquire+0xd4/0x1310 ? dev_attr_show+0x1c/0x50 ? __lock_acquire+0x2ba/0x1310 ? kernfs_seq_start+0x2a/0x80 ? lock_acquire+0x9e/0x1a0 lock_acquire+0x9e/0x1a0 ? dev_attr_show+0x1c/0x50 badblocks_show+0x70/0x190 ? dev_attr_show+0x1c/0x50 dev_attr_show+0x1c/0x50 This results from a missing successful call to devm_init_badblocks() from nd_region_probe(). Block attempts to show badblocks while the region is not enabled. Fixes: 6a6bef90425e ("libnvdimm: add mechanism to publish badblocks...") Cc: <stable@vger.kernel.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-07-25libnvdimm: Export max available extentKeith Busch1-0/+16
The 'available_size' attribute showing the combined total of all unallocated space isn't always useful to know how large of a namespace a user may be able to allocate if the region is fragmented. This patch will export the largest extent of unallocated space that may be allocated to create a new namespace. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2018-07-25libnvdimm: Use max contiguous area for namespace sizeKeith Busch1-0/+24
This patch will find the max contiguous area to determine the largest pmem namespace size that can be created. If the requested size exceeds the largest available, ENOSPC error will be returned. This fixes the allocation underrun error and wrong error return code that have otherwise been observed as the following kernel warning: WARNING: CPU: <CPU> PID: <PID> at drivers/nvdimm/namespace_devs.c:913 size_store Fixes: a1f3e4d6a0c3 ("libnvdimm, region: update nd_region_available_dpa() for multi-pmem support") Cc: <stable@vger.kernel.org> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2018-06-06libnvdimm, pmem: Do not flush power-fail protected CPU cachesRoss Zwisler1-1/+2
This commit: 5fdf8e5ba566 ("libnvdimm: re-enable deep flush for pmem devices via fsync()") intended to make sure that deep flush was always available even on platforms which support a power-fail protected CPU cache. An unintended side effect of this change was that we also lost the ability to skip flushing CPU caches on those power-fail protected CPU cache. Fix this by skipping the low level cache flushing in dax_flush() if we have CPU caches which are power-fail protected. The user can still override this behavior by manually setting the write_cache state of a namespace. See libndctl's ndctl_namespace_write_cache_is_enabled(), ndctl_namespace_enable_write_cache() and ndctl_namespace_disable_write_cache() functions. Cc: <stable@vger.kernel.org> Fixes: 5fdf8e5ba566 ("libnvdimm: re-enable deep flush for pmem devices via fsync()") Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-09Merge branch 'for-4.17/libnvdimm' into libnvdimm-for-nextDan Williams1-0/+9
2018-04-07libnvdimm: Add of_node to region and bus descriptorsOliver O'Halloran1-0/+1
We want to be able to cross reference the region and bus devices with the device tree node that they were spawned from. libNVDIMM handles creating the actual devices for these internally, so we need to pass in a pointer to the relevant node in the descriptor. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-03libnvdimm: add an api to cast a 'struct nd_region' to its 'struct device'Dan Williams1-0/+8
For debug, it is useful for bus providers to be able to retrieve the 'struct device' associated with an nd_region instance that it registered. We already have to_nd_region() to perform the reverse cast operation, in fact its duplicate declaration can be removed from the private drivers/nvdimm/nd.h header. Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-21libnvdimm, nfit: fix persistence domain reportingDan Williams1-4/+6
The persistence domain is a point in the platform where once writes reach that destination the platform claims it will make them persistent relative to power loss. In the ACPI NFIT this is currently communicated as 2 bits in the "NFIT - Platform Capabilities Structure". The bits comprise a hierarchy, i.e. bit0 "CPU Cache Flush to NVDIMM Durability on Power Loss Capable" implies bit1 "Memory Controller Flush to NVDIMM Durability on Power Loss Capable". Commit 96c3a239054a "libnvdimm: expose platform persistence attr..." shows the persistence domain as flags, but it's really an enumerated hierarchy. Fix this newly introduced user ABI to show the closest available persistence domain before userspace develops dependencies on seeing, or needing to develop code to tolerate, the raw NFIT flags communicated through the libnvdimm-generic region attribute. Fixes: 96c3a239054a ("libnvdimm: expose platform persistence attr...") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-21libnvdimm, region: hide persistence_domain when unknownDan Williams1-0/+7
Similar to other region attributes, do not emit the persistence_domain attribute if its contents are empty. Fixes: 96c3a239054a ("libnvdimm: expose platform persistence attr...") Cc: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-02-01libnvdimm: expose platform persistence attribute for nd_regionDave Jiang1-0/+13
Providing a sysfs attribute for nd_region that shows the persistence capabilities for the platform. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
2017-09-28libnvdimm, region : make 'resource' attribute only readable by rootDan Williams1-2/+6
For the same reason that /proc/iomem returns 0's for non-root readers and acpi tables are root-only, make the 'resource' attribute for region devices only readable by root. Otherwise we disclose physical address information. Fixes: 802f4be6feee ("libnvdimm: Add 'resource' sysfs attribute to regions") Cc: <stable@vger.kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-04nfit, libnvdimm, region: export 'position' in mapping infoDan Williams1-2/+4
It is useful to be able to know the position of a DIMM in an interleave-set. Consider the case where the order of the DIMMs changes causing a namespace to be invalidated because the interleave-set cookie no longer matches. If the before and after state of each DIMM position is known this state debugged by the system owner. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-03Merge branch 'for-4.13/dax' into libnvdimm-for-nextDan Williams1-18/+25
2017-06-29acpi, nfit: quiet invalid block-aperture-region warningsDan Williams1-1/+1
This state is already visible by userspace since the BLK region will not be enabled, and it is otherwise benign as it usually indicates that the DIMM is not configured. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-25 02:08:14 +0000