summaryrefslogtreecommitdiffstats
path: root/drivers/ntb
AgeCommit message (Collapse)AuthorFilesLines
2020-06-05NTB: perf: Fix race condition when run with ntb_testLogan Gunthorpe1-2/+8
When running ntb_test, the script tries to run the ntb_perf test immediately after probing the modules. Since adding multi-port support, this fails seeing the new initialization procedure in ntb_perf can not complete instantly. To fix this we add a completion which is waited on when a test is started. In this way, run can be written any time after the module is loaded and it will wait for the initialization to complete instead of sending an error. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: perf: Fix support for hardware that doesn't have port numbersLogan Gunthorpe1-0/+10
Legacy drivers do not have port numbers (but is reliably only two ports) and was broken by the recent commit that added mult-port support to ntb_perf. This is especially important to support the cross link topology which is perfectly symmetric and cannot assign unique port numbers easily. Hardware that returns zero for both the local port and the peer should just always use gidx=0 for the only peer. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: perf: Don't require one more memory window than number of peersLogan Gunthorpe1-1/+1
ntb_perf should not require more than one memory window per peer. This was probably an off-by-one error. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: ntb_pingpong: Choose doorbells based on port numberLogan Gunthorpe1-8/+6
This commit fixes pingpong support for existing drivers that do not implement ntb_default_port_number() and ntb_default_peer_port_number(). This is required for hardware (like the crosslink topology of switchtec) which cannot assign reasonable port numbers to each port due to its perfect symmetry. Instead of picking the doorbell to use based on the the index of the peer, we use the peer's port number. This is a bit clearer and easier to understand. Fixes: c7aeb0afdcc2 ("NTB: ntb_pp: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: Fix the default port and peer numbers for legacy driversLogan Gunthorpe1-6/+2
When the commit adding ntb_default_port_number() and ntb_default_peer_port_number() entered the kernel there was no users of it so it was impossible to tell what the API needed. When a user finally landed a year later (ntb_pingpong) there were more NTB topologies were created and no consideration was considered to how other drivers had changed. Now that there is a user it can be fixed to provide a sensible default for the legacy drivers that do not implement ntb_{peer_}port_number(). Seeing ntb_pingpong doesn't check error codes returning EINVAL was also not sensible. Patches for ntb_pingpong and ntb_perf follow (which are broken otherwise) to support hardware that doesn't have port numbers. This is important not only to not break support with existing drivers but for the cross link topology which, due to its perfect symmetry, cannot assign unique port numbers to each side. Fixes: 1e5301196a88 ("NTB: Add indexed ports NTB API") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: Revert the change to use the NTB device dev for DMA allocationsLogan Gunthorpe1-1/+0
Commit 417cf39cfea9 ("NTB: Set dma mask and dma coherent mask to NTB devices") started using the NTB device for DMA allocations which was turns out was wrong. If the IOMMU is enabled, such alloctanions will always fail with messages such as: DMAR: Allocating domain for 0000:02:00.1 failed This is because the IOMMU has not setup the device for such use. Change the tools back to using the PCI device for allocations seeing it doesn't make sense to add an IOMMU group for the non-physical NTB device. Also remove the code that sets the DMA mask as it no longer makes sense to do this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05NTB: ntb_tool: reading the link file should not end in a NULL byteLogan Gunthorpe1-2/+1
When running ntb_test this warning is issued: ./ntb_test.sh: line 200: warning: command substitution: ignored null byte in input This is caused by the kernel returning one more byte than is necessary when reading the link file. Reduce the number of bytes read back to 2 as it was before the commit that regressed this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb_perf: avoid false dma unmap of destination addressSanjay R Mehta1-9/+2
The DMA map and unmap of destination address is already being done in perf_init_test() and perf_clear_test() functions. Hence avoiding it by making necessary changes in perf_copy_chunk() function. Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb_perf: increase sleep time from one milli sec to one secSanjay R Mehta1-2/+2
After trying to send commands for a maximum of MSG_TRIES re-tries, link-up fails due to short sleep time(1ms) between re-tries. Hence increasing the sleep time to one second providing sufficient time for perf link-up. Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb_tool: pass correct struct device to dma_alloc_coherentSanjay R Mehta1-3/+3
Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb_perf: pass correct struct device to dma_alloc_coherentSanjay R Mehta1-4/+4
Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb: hw: remove the code that sets the DMA maskLogan Gunthorpe3-14/+0
This patch removes the code that sets the DMA mask as it no longer makes sense to do this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb: intel: fix static declarationDave Jiang1-1/+1
intel_ntb4_link_disable() missing static declaration. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-06-05ntb: intel: add hw workaround for NTB BAR alignmentDave Jiang3-13/+79
Add NTB_HWERR_BAR_ALIGN hw errata flag to work around issue where the aligment for the XLAT base must be BAR size aligned rather than 4k page aligned. On ICX platform, the XLAT base can be 4k page size aligned rather than BAR size aligned unlike the previous gen Intel NTB. However, a silicon errata prevented this from working as expected and a workaround is introduced to resolve the issue. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-04-20ntb: intel: Add Icelake (gen4) support for Intel NTBDave Jiang7-27/+640
Adding 4th generation Intel NTB support bits. There are a lot of common parts that the gen4 NTB has with gen3 NTB on Skylake. The commonalities are reused in gen4 Icelake NTB. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-04-13NTB: Fix static check warning in perf_clear_testJiasen Lin1-2/+2
As pthr->dma_chan can't be NULL in this context, so there is no need to check pthr->dma_chan. Fixes: 99a06056124d ("NTB: ntb_perf: Fix address err in perf_copy_chunk") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiasen Lin <linjiasen@hygon.cn> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-04-03Merge tag 'pci-v5.7-changes' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-03-28PCI/AER: Rationalize error status register clearingKuppuswamy Sathyanarayanan1-2/+2
The AER interfaces to clear error status registers were a confusing mess: - pci_cleanup_aer_uncorrect_error_status() cleared non-fatal errors from the Uncorrectable Error Status register. - pci_aer_clear_fatal_status() cleared fatal errors from the Uncorrectable Error Status register. - pci_cleanup_aer_error_status_regs() cleared the Root Error Status register (for Root Ports), the Uncorrectable Error Status register, and the Correctable Error Status register. Rename them to make them consistent: From To ---------------------------------------- ------------------------------- pci_cleanup_aer_uncorrect_error_status() pci_aer_clear_nonfatal_status() pci_aer_clear_fatal_status() pci_aer_clear_fatal_status() pci_cleanup_aer_error_status_regs() pci_aer_clear_status() Since pci_cleanup_aer_error_status_regs() (renamed to pci_aer_clear_status()) is only used within drivers/pci/, move the declaration from <linux/aer.h> to drivers/pci/pci.h. [bhelgaas: commit log, add renames] Link: https://lore.kernel.org/r/d1310a75dc3d28f7e8da4e99c45fbd3e60fe238e.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-13NTB: add pci shutdown handler for AMD NTBArindam Nath1-0/+17
The PCI shutdown handler is invoked in response to system reboot or shutdown. A data transfer might still be in flight when this happens. So the very first action we take here is to send a link down notification, so that any pending data transfer is terminated. Rest of the actions are same as that of PCI remove handler. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: send DB event when driver is loaded or un-loadedArindam Nath2-2/+56
When the driver on the local side is loaded, it sets SIDE_READY bit in SIDE_INFO register. Likewise, when it is un-loaded, it clears the bit. Also just after being loaded, the driver polls for peer SIDE_READY bit to be set. Since that bit is set when the peer side driver has loaded, the polling on local side breaks as soon as this condition is met. But the situation is different when the driver is un-loaded. Since the polling has already been stopped as mentioned before, if the peer side driver gets un-loaded, the driver on the local side is not notified implicitly. So, we improvise using existing doorbell mechanism. We reserve the highest order bit of the DB register to send a notification to peer when the driver on local side is un-loaded. This also means that now we are one short of 16 DB events and that is taken care of in the valid DB mask. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: remove redundant setting of DB valid maskArindam Nath1-2/+0
db_valid_mask is set at two places, once within amd_init_ntb(), and again within amd_init_dev(). Since amd_init_ntb() is actually called from amd_init_dev(), setting db_valid_mask from former does not really make sense. So remove it. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: return link up status correctly for PRI and SECArindam Nath2-5/+60
Since NTB connects two physically separate systems, there can be scenarios where one system goes down while the other one remains active. In case of NTB primary, if the NTB secondary goes down, a Link-Down event is received. For the NTB secondary, if the NTB primary goes down, the PCIe hotplug mechanism ensures that the driver on the secondary side is also unloaded. But there are other scenarios to consider as well, when suppose the physical link remains active, but the driver on primary or secondary side is loaded or un-loaded. When the driver is loaded, on either side, it sets SIDE_READY bit(bit-1) of SIDE_INFO register. Similarly, when the driver is un-loaded, it resets the same bit. We consider the NTB link to be up and operational only when the driver on both sides of link are loaded and ready. But we also need to take account of Link Up and Down events which signify the physical link status. So amd_link_is_up() is modified to take care of the above scenarios. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: add helper functions to set and clear sideinfoArindam Nath2-10/+37
We define two new helper functions to set and clear sideinfo registers respectively. These functions take an additional boolean parameter which signifies whether we want to set/clear the sideinfo register of the peer(true) or local host(false). Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: move ntb_ctrl handling to init and deinitArindam Nath1-10/+10
It does not really make sense to enable or disable the bits of NTB_CTRL register only during enable and disable link callbacks. They should be done independent of these callbacks. The correct placement for that is during the amd_init_side_info() and amd_deinit_side_info() functions, which are invoked during probe and remove respectively. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: handle link up, D0 and D3 events correctlyArindam Nath1-0/+6
Just like for Link-Down event, Link-Up and D3 events are also mutually exclusive to Link-Down and D0 events respectively. So we clear the bitmasks in peer_sta depending on event type. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: handle link down event correctlyArindam Nath1-3/+6
Link-Up and Link-Down are mutually exclusive events. So when we receive a Link-Down event, we should also clear the bitmask for Link-Up event in peer_sta. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: remove handling of peer_sta from amd_link_is_upArindam Nath1-11/+0
amd_link_is_up() is a callback to inquire whether the NTB link is up or not. So it should not indulge itself into clearing the bitmasks of peer_sta. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: set peer_sta within event handler itselfArindam Nath1-2/+4
amd_ack_smu() should only set the corresponding bits into SMUACK register. Setting the bitmask of peer_sta should be done within the event handler. They are two different things, and so should be handled differently and at different places. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: return the side info status from amd_poll_linkArindam Nath2-8/+5
Bit 1 of SIDE_INFO register is an indication that the driver on the other side of link is ready. We set this bit during driver initialization sequence. So rather than having separate macros to return the status, we can simply return the status of this bit from amd_poll_link(). So a return of 1 or 0 from this function will indicate to the caller whether the driver on the other side of link is ready or not, respectively. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: define a new function to get link statusArindam Nath1-43/+50
Since getting the status of link is a logically separate operation, we simply create a new function which will store the link status to be used later. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: Enable link up and down event notificationArindam Nath1-0/+5
Link-Up and Link-Down events can occur irrespective of whether a data transfer is in progress or not. So we need to enable the interrupt delivery for these events early during driver load. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: clear interrupt status registerArindam Nath1-0/+3
The interrupt status register should be cleared by driver once the particular event is handled. The patch fixes this. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: Fix access to link status and control registerArindam Nath1-3/+37
The design of AMD NTB implementation is such that NTB primary acts as an endpoint device and NTB secondary is an endpoint device behind a combination of Switch Upstream and Switch Downstream. Considering that, the link status and control register needs to be accessed differently based on the NTB topology. So in the case of NTB secondary, we first get the pointer to the Switch Downstream device for the NTB device. Then we get the pointer to the Switch Upstream device. Once we have that, we read the Link Status and Control register to get the correct status of link at the secondary. In the case of NTB primary, simply reading the Link Status and Control register of the NTB device itself will suffice. Suggested-by: Jiasen Lin <linjiasen@hygon.cn> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: ntb_transport: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-29/+29
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Fixes: fce8a7bb5b4b (PCI-Express Non-Transparent Bridge Support) Fixes: 282a2feeb9bf (NTB: Use DMA Engine to Transmit and Receive) Fixes: a754a8fcaf38 (NTB: allocate number transport entries depending on size of ring size) Fixes: d98ef99e378b (NTB: Clean up QP stats info) Fixes: e74bfeedad08 (NTB: Add flow control to the ntb_netdev) Fixes: 569410ca756c (NTB: Use unique DMA channels for TX and RX) Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13ntb_hw_switchtec: Fix ntb_mw_clear_trans error if size == 0Alexander Fomichev1-1/+1
ntb_mw_set_trans() should work as ntb_mw_clear_trans() when size == 0 and/or addr == 0. But error in xlate_pos checking condition prevents this. Fix the condition to make ntb_mw_clear_trans() working. Fixes: 87d11e645e31 (NTB: switchtec_ntb: Add memory window support) Signed-off-by: Alexander Fomichev <fomichev.ru@gmail.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13ntb_tool: Fix printk formatHelge Deller1-7/+7
The correct printk format is %pa or %pap, but not %pa[p]. Fixes: 7f46c8b3a5523 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: ntb_perf: Fix address err in perf_copy_chunkJiasen Lin1-10/+47
peer->outbuf is a virtual address which is get by ioremap, it can not be converted to a physical address by virt_to_page and page_to_phys. This conversion will result in DMA error, because the destination address which is converted by page_to_phys is invalid. This patch save the MMIO address of NTB BARx in perf_setup_peer_mw, and map the BAR space to DMA address after we assign the DMA channel. Then fill the destination address of DMA descriptor with this DMA address to guarantee that the address of memory write requests fall into memory window of NBT BARx with IOMMU enabled and disabled. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Jiasen Lin <linjiasen@hygon.cn> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-12NTB: Fix an error in get link statusJiasen Lin2-3/+2
The offset of PCIe Capability Header for AMD and HYGON NTB is 0x64, but the macro which named "AMD_LINK_STATUS_OFFSET" is defined as 0x68. It is offset of Device Capabilities Reg rather than Link Control Reg. This code trigger an error in get link statsus: cat /sys/kernel/debug/ntb_hw_amd/0000:43:00.1/info LNK STA - 0x8fa1 Link Status - Up Link Speed - PCI-E Gen 0 Link Width - x0 This patch use pcie_capability_read_dword to get link status. After fix this issue, we can get link status accurately: cat /sys/kernel/debug/ntb_hw_amd/0000:43:00.1/info LNK STA - 0x11030042 Link Status - Up Link Speed - PCI-E Gen 3 Link Width - x16 Fixes: a1b3695820aa4 ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge") Signed-off-by: Jiasen Lin <linjiasen@hygon.cn> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-12-07Merge tag 'ntb-5.5' of git://github.com/jonmason/ntbLinus Torvalds1-0/+1
Pull NTB update from Jon Mason: "Just a simple patch to add a new Hygon Device ID to the AMD NTB device driver" * tag 'ntb-5.5' of git://github.com/jonmason/ntb: NTB: Add Hygon Device ID
2019-12-07NTB: Add Hygon Device IDJiasen Lin1-0/+1
Signed-off-by: Jiasen Lin <linjiasen@hygon.cn> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-10-16ntb: ntb_pingpong: no need to check the return value of debugfs callsGreg Kroah-Hartman1-4/+1
There is no need to check the return value of debugfs_create_atomic_t as nothing happens with the error. Also, the code will never return NULL, so this check has never caught anything :) Fix this by removing the check entirely. Cc: Jon Mason <jdmason@kudzu.us> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Cc: linux-ntb@googlegroups.com Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20191011131919.GA1174815@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-23NTB: fix IDT Kconfig typos/spellosRandy Dunlap1-3/+3
Fix typos in drivers/ntb/hw/idt/Kconfig. Use consistent spelling and capitalization. Fixes: bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-09-23ntb_hw_amd: Add memory window support for new AMD hardwareSanjay R Mehta2-6/+24
The AMD new hardware uses BAR23 and BAR45 as memory windows as compared to previos where BAR1, BAR23 and BAR45 is used for memory windows. This patch add support for both AMD hardwares. Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-09-23ntb_hw_amd: Add a new NTB PCI device IDSanjay R Mehta2-2/+2
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-09-23NTB: ntb_transport: remove redundant assignment to rcColin Ian King1-1/+1
Variable rc is initialized to a value that is never read and it is re-assigned later. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-09-23ntb_hw_switchtec: make ntb_mw_set_trans() work when addr == 0Alexander Fomichev1-1/+1
On switchtec_ntb_mw_set_trans() call, when (only) address == 0, it acts as ntb_mw_clear_trans(). Fix this, since address == 0 and size != 0 is valid combination for setting translation. Signed-off-by: Alexander Fomichev <fomichev.ru@gmail.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-09-23ntb: point to right memory window indexSanjay R Mehta1-1/+1
second parameter of ntb_peer_mw_get_addr is pointing to wrong memory window index by passing "peer gidx" instead of "local gidx". For ex, "local gidx" value is '0' and "peer gidx" value is '1', then on peer side ntb_mw_set_trans() api is used as below with gidx pointing to local side gidx which is '0', so memroy window '0' is chosen and XLAT '0' will be programmed by peer side. ntb_mw_set_trans(perf->ntb, peer->pidx, peer->gidx, peer->inbuf_xlat, peer->inbuf_size); Now, on local side ntb_peer_mw_get_addr() is been used as below with gidx pointing to "peer gidx" which is '1', so pointing to memory window '1' instead of memory window '0'. ntb_peer_mw_get_addr(perf->ntb, peer->gidx, &phys_addr, &peer->outbuf_size); So this patch pass "local gidx" as parameter to ntb_peer_mw_get_addr(). Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-08-05NTB/msi: remove incorrect MODULE definesLogan Gunthorpe1-5/+0
msi.c is not a module on its own right and should not have the MODULE_[LICENSE|VERSION|AUTHOR|DESCRIPTION] definitions. This caused a regression noticed by lkp with the following back trace: WARNING: CPU: 0 PID: 1 at kernel/params.c:861 param_sysfs_init+0xb1/0x20a Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-00018-g26b3a37b928457 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 RIP: 0010:param_sysfs_init+0xb1/0x20a Code: 24 38 e8 ec 17 2e fd 49 8b 7c 24 38 e8 76 fe ff ff 48 85 c0 48 89 c5 74 25 31 d2 4c 89 e6 48 89 c7 e8 6d 6f 3c fd 85 c0 74 02 <0f> 0b 48 89 ef 31 f6 e8 5d 70 a7 fe 48 89 ef e8 95 52 a7 fe 48 83 RSP: 0000:ffff88806b0ffe30 EFLAGS: 00010282 RAX: 00000000ffffffef RBX: ffffffff83774220 RCX: ffff88806a85e880 RDX: 00000000ffffffef RSI: ffff88806b000400 RDI: ffff88806a8608c0 RBP: ffff88806b392000 R08: ffffed100d61ff59 R09: ffffed100d61ff59 R10: 0000000000000001 R11: ffffed100d61ff58 R12: ffffffff83974bc0 R13: 0000000000000004 R14: 0000000000000028 R15: 00000000000003b9 FS: 0000000000000000(0000) GS:ffff88806b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000000380e000 CR4: 00000000000406b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? file_caps_disable+0x10/0x10 ? locate_module_kobject+0xf2/0xf2 do_one_initcall+0x47/0x1f0 kernel_init_freeable+0x1b1/0x243 ? rest_init+0xd0/0xd0 kernel_init+0xa/0x130 ? calculate_sigpending+0x63/0x80 ? rest_init+0xd0/0xd0 ret_from_fork+0x1f/0x30 ---[ end trace 78201497ae74cc91 ]--- Reported-by: kernel test robot <lkp@intel.com> Fixes: 26b3a37b9284 ("NTB: Introduce MSI library") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-07-21Merge tag 'ntb-5.3' of git://github.com/jonmason/ntbLinus Torvalds12-44/+1110
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
2019-06-13NTB: Add MSI interrupt support to ntb_transportLogan Gunthorpe1-1/+168
Introduce the module parameter 'use_msi' which, when set, uses MSI interrupts instead of doorbells for each queue pair (QP). The parameter is only available if NTB MSI support is configured into the kernel. We also require there to be more than one memory window (MW) so that an extra one is available to forward the APIC region. To use MSIs, we request one interrupt per QP and forward the MSI address and data to the peer using scratch pad registers (SPADS) above the MW SPADS. (If there are not enough SPADS the MSI interrupt will not be used.) Once registered, we simply use ntb_msi_peer_trigger and the receiving ISR simply queues up the rxc_db_work for the queue. This addition can significantly improve performance of ntb_transport. In a simple, untuned, apples-to-apples comparision using ntb_netdev and iperf with switchtec hardware, I see 3.88Gb/s without MSI interrupts and 14.1Gb/s wit MSI, which is a more than 3x improvement. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>