summaryrefslogtreecommitdiffstats
path: root/drivers/ntb
AgeCommit message (Collapse)AuthorFilesLines
2019-09-23NTB: fix IDT Kconfig typos/spellosRandy Dunlap1-3/+3
Fix typos in drivers/ntb/hw/idt/Kconfig. Use consistent spelling and capitalization. Fixes: bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-09-23ntb_hw_amd: Add memory window support for new AMD hardwareSanjay R Mehta2-6/+24
The AMD new hardware uses BAR23 and BAR45 as memory windows as compared to previos where BAR1, BAR23 and BAR45 is used for memory windows. This patch add support for both AMD hardwares. Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-09-23ntb_hw_amd: Add a new NTB PCI device IDSanjay R Mehta2-2/+2
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-09-23NTB: ntb_transport: remove redundant assignment to rcColin Ian King1-1/+1
Variable rc is initialized to a value that is never read and it is re-assigned later. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-09-23ntb_hw_switchtec: make ntb_mw_set_trans() work when addr == 0Alexander Fomichev1-1/+1
On switchtec_ntb_mw_set_trans() call, when (only) address == 0, it acts as ntb_mw_clear_trans(). Fix this, since address == 0 and size != 0 is valid combination for setting translation. Signed-off-by: Alexander Fomichev <fomichev.ru@gmail.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-09-23ntb: point to right memory window indexSanjay R Mehta1-1/+1
second parameter of ntb_peer_mw_get_addr is pointing to wrong memory window index by passing "peer gidx" instead of "local gidx". For ex, "local gidx" value is '0' and "peer gidx" value is '1', then on peer side ntb_mw_set_trans() api is used as below with gidx pointing to local side gidx which is '0', so memroy window '0' is chosen and XLAT '0' will be programmed by peer side. ntb_mw_set_trans(perf->ntb, peer->pidx, peer->gidx, peer->inbuf_xlat, peer->inbuf_size); Now, on local side ntb_peer_mw_get_addr() is been used as below with gidx pointing to "peer gidx" which is '1', so pointing to memory window '1' instead of memory window '0'. ntb_peer_mw_get_addr(perf->ntb, peer->gidx, &phys_addr, &peer->outbuf_size); So this patch pass "local gidx" as parameter to ntb_peer_mw_get_addr(). Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-08-05NTB/msi: remove incorrect MODULE definesLogan Gunthorpe1-5/+0
msi.c is not a module on its own right and should not have the MODULE_[LICENSE|VERSION|AUTHOR|DESCRIPTION] definitions. This caused a regression noticed by lkp with the following back trace: WARNING: CPU: 0 PID: 1 at kernel/params.c:861 param_sysfs_init+0xb1/0x20a Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-00018-g26b3a37b928457 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 RIP: 0010:param_sysfs_init+0xb1/0x20a Code: 24 38 e8 ec 17 2e fd 49 8b 7c 24 38 e8 76 fe ff ff 48 85 c0 48 89 c5 74 25 31 d2 4c 89 e6 48 89 c7 e8 6d 6f 3c fd 85 c0 74 02 <0f> 0b 48 89 ef 31 f6 e8 5d 70 a7 fe 48 89 ef e8 95 52 a7 fe 48 83 RSP: 0000:ffff88806b0ffe30 EFLAGS: 00010282 RAX: 00000000ffffffef RBX: ffffffff83774220 RCX: ffff88806a85e880 RDX: 00000000ffffffef RSI: ffff88806b000400 RDI: ffff88806a8608c0 RBP: ffff88806b392000 R08: ffffed100d61ff59 R09: ffffed100d61ff59 R10: 0000000000000001 R11: ffffed100d61ff58 R12: ffffffff83974bc0 R13: 0000000000000004 R14: 0000000000000028 R15: 00000000000003b9 FS: 0000000000000000(0000) GS:ffff88806b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000000380e000 CR4: 00000000000406b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? file_caps_disable+0x10/0x10 ? locate_module_kobject+0xf2/0xf2 do_one_initcall+0x47/0x1f0 kernel_init_freeable+0x1b1/0x243 ? rest_init+0xd0/0xd0 kernel_init+0xa/0x130 ? calculate_sigpending+0x63/0x80 ? rest_init+0xd0/0xd0 ret_from_fork+0x1f/0x30 ---[ end trace 78201497ae74cc91 ]--- Reported-by: kernel test robot <lkp@intel.com> Fixes: 26b3a37b9284 ("NTB: Introduce MSI library") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-07-21Merge tag 'ntb-5.3' of git://github.com/jonmason/ntbLinus Torvalds12-44/+1110
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
2019-06-13NTB: Add MSI interrupt support to ntb_transportLogan Gunthorpe1-1/+168
Introduce the module parameter 'use_msi' which, when set, uses MSI interrupts instead of doorbells for each queue pair (QP). The parameter is only available if NTB MSI support is configured into the kernel. We also require there to be more than one memory window (MW) so that an extra one is available to forward the APIC region. To use MSIs, we request one interrupt per QP and forward the MSI address and data to the peer using scratch pad registers (SPADS) above the MW SPADS. (If there are not enough SPADS the MSI interrupt will not be used.) Once registered, we simply use ntb_msi_peer_trigger and the receiving ISR simply queues up the rxc_db_work for the queue. This addition can significantly improve performance of ntb_transport. In a simple, untuned, apples-to-apples comparision using ntb_netdev and iperf with switchtec hardware, I see 3.88Gb/s without MSI interrupts and 14.1Gb/s wit MSI, which is a more than 3x improvement. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13NTB: Introduce NTB MSI Test ClientLogan Gunthorpe3-0/+443
Introduce a tool to test NTB MSI interrupts similar to the other NTB test tools. This tool creates a debugfs directory for each NTB device with the following files: port irqX_occurrences peerX/port peerX/count peerX/trigger The 'port' file tells the user the local port number and the 'occurrences' files tell the number of local interrupts that have been received for each interrupt. For each peer, the 'port' file and the 'count' file tell you the peer's port number and number of interrupts respectively. Writing the interrupt number to the 'trigger' file triggers the interrupt handler for the peer which should increment their corresponding 'occurrences' file. The 'ready' file indicates if a peer is ready, writing to this file blocks until it is ready. The module parameter num_irqs can be used to set the number of local interrupts. By default this is 4. This is only limited by the number of unused MSI interrupts registered by the hardware (this will require support of the hardware driver) and there must be at least 2*num_irqs + 1 spads registers available. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13NTB: Introduce MSI libraryLogan Gunthorpe3-1/+428
The NTB MSI library allows passing MSI interrupts across a memory window. This offers similar functionality to doorbells or messages except will often have much better latency and the client can potentially use significantly more remote interrupts than typical hardware provides for doorbells. (Which can be important in high-multiport setups.) The library utilizes one memory window per peer and uses the highest index memory windows. Before any ntb_msi function may be used, the user must call ntb_msi_init(). It may then setup and tear down the memory windows when the link state changes using ntb_msi_setup_mws() and ntb_msi_clear_mws(). The peer which receives the interrupt must call ntb_msim_request_irq() to assign the interrupt handler (this function is functionally similar to devm_request_irq()) and the returned descriptor must be transferred to the peer which can use it to trigger the interrupt. The triggering peer, once having received the descriptor, can trigger the interrupt by calling ntb_msi_peer_trigger(). Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13NTB: Rename ntb.c to support multiple source files in the moduleLogan Gunthorpe2-0/+2
The kbuild system does not support having multiple source files in a module if one of those source files has the same name as the module. Therefore, we must rename ntb.c to core.c, while the module remains ntb.ko. This is similar to the way the nvme modules are structured. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13ntb_hw_switchtec: Fix setup MW with failure bugJoey Zhang1-27/+39
Switchtec does not support setting multiple MWs simultaneously. The driver takes a hardware lock to ensure that two peers are not doing this simultaneously and it fails if someone else takes the lock. In most cases, this is fine as clients only setup the MWs once on one side of the link. However, there's a race condition when a re-initialization is caused by a link event. The driver will re-setup the shared memory window asynchronously and this races with the client setting up it's memory windows on the link up event. To fix this we ensure do the entire initialization in a work queue and signal the client once it's done. Signed-off-by: Joey Zhang <joey.zhang@microchip.com> Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for ↵Wesley Sheng1-0/+3
crosslink case In case of NTB crosslink topology, the setting of shared memory window in the virtual partition doesn't reset on peer's reboot. So skip the unnecessary re-setup of shared memory window for that case. Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() functionJoey Zhang1-4/+7
When a re-initialization is caused by a link event, the driver will re-setup the shared memory window. But at that time, the shared memory is still valid, and it's unnecessary to free, reallocate and then initialize it again. We only need to reconfigure the hardware registers. Remove the redundant steps from switchtec_ntb_reinit_peer() function. Signed-off-by: Joey Zhang <joey.zhang@microchip.com> Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()Dan Carpenter1-1/+1
This code triggers a Smatch warning: drivers/ntb/hw/amd/ntb_hw_amd.c:336 amd_ntb_db_vector_mask() warn: should '(1 << db_vector)' be a 64 bit type? I don't think "db_vector" can be higher than 16 so this doesn't affect runtime, but it's nice to silence the static checker warning and we might increase "ndev->db_count" in the future. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()Dan Carpenter1-1/+1
This code triggers a Smatch warning: drivers/ntb/hw/mscc/ntb_hw_switchtec.c:884 switchtec_ntb_init_sndev() warn: should '(1 << sndev->peer_partition)' be a 64 bit type? The "part_map" and "tpart_vec" variables are u64 type so this seems like a valid warning. Fixes: 3df54c870f52 ("ntb_hw_switchtec: Allow using Switchtec NTB in multi-partition setups") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazedLogan Gunthorpe1-0/+1
Dan Carpenter's static checker reported: drivers/ntb/ntb_transport.c:1926 ntb_transport_create_queue() error: we previously assumed 'qp->tx_dma_chan' could be null (see line 1872) This is because the tx_mw_dma_addr is uninitialized in this function and may be incorrectly released using a NULL DMA channel. In practice this bug will not likely be seen. I'd guess you could hit this if you loaded ntb_netdev with use_dma=True, then unloaded it and loaded it again after setting the module parameter to use_dma=False. To fix this, we simply ensure that tx_mw_dma_addr is always initialized to zero. This is the safest in case any other part of the code operates on it if it is non-zero. Fixes: c59666bb32b9 ("NTB: ntb_transport: Ensure the destination buffer is mapped for TX DMA") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13NTB: ntb_hw_amd: set peer limit registerSanjay R Mehta1-4/+4
As per amd ntb spec it says that peer limit register must be programmed Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13NTB: ntb_perf: Clear stale values in doorbell and command SPAD registerSanjay R Mehta1-0/+8
when ntb_perf is unloaded, the command scratchpad register still retains the last initialized value of PERF_CMD_INVAL. When ntb_perf is re-loaded and reads peer command scratchpad register and it mis interprets the peer state as initialized. To avoid this, clearing the local side command scratchpad register in perf_disable_service Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13NTB: ntb_perf: Disable NTB link after clearing peer XLAT registersSanjay R Mehta1-2/+2
If ntb link disabled before clearing peer's XLAT register, the clearing won't have any effect since the link is already down. So modified the sequence so that the link is down only towards the end of the function after clearing the XLAT register Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13NTB: ntb_perf: Increased the number of message retries to 1000Sanjay R Mehta1-1/+1
while waiting for the peer ntb_perf to initialize scratchpad registers, local side ntb_perf might have already exhausted the maximum number of retries which is currently set to 500. To avoid this and to give little more time to the peer ntb_perf for scratchpad initialization, increased the number of retries to 1000 Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-13ntb: intel: Make intel_ntb3_peer_db_addr staticYueHaibing1-3/+3
Fix sparse warning: drivers/ntb/hw/intel/ntb_hw_gen3.c:535:5: warning: symbol 'intel_ntb3_peer_db_addr' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner1-10/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner14-0/+14
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon2-10/+0
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-03-15Merge tag 'ntb-5.1' of git://github.com/jonmason/ntbLinus Torvalds5-15/+99
Pull NTB updates from Jon Mason: - fixes for switchtec debugability and mapping table entries - NTB transport improvements - a reworking of the peer_db_addr for better abstraction * tag 'ntb-5.1' of git://github.com/jonmason/ntb: NTB: add new parameter to peer_db_addr() db_bit and db_data NTB: ntb_transport: Ensure the destination buffer is mapped for TX DMA NTB: ntb_transport: Free MWs in ntb_transport_link_cleanup() ntb_hw_switchtec: Added support of >=4G memory windows ntb_hw_switchtec: NT req id mapping table register entry number should be 512 ntb_hw_switchtec: debug print 64bit aligned crosslink BAR Numbers
2019-02-13NTB: add new parameter to peer_db_addr() db_bit and db_dataLeonid Ravich4-10/+62
NTB door bell usage depends on NTB hardware. ex: intel NTB gen1 has one peer door bell register which can be controlled by the bitmap writen to it, while Intel NTB gen3 has a registers per door bell and the data trigering the each door bell is always 1. therefore exposing only peer door bell address forcing the user to be aware of such low level details Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-02-11NTB: ntb_transport: Ensure the destination buffer is mapped for TX DMALogan Gunthorpe1-2/+26
Presently, when ntb_transport is used with DMA and the IOMMU turned on, it fails with errors from the IOMMU such as: DMAR: DRHD: handling fault status reg 202 DMAR: [DMA Write] Request device [00:04.0] fault addr 381fc0340000 [fault reason 05] PTE Write access is not set This is because ntb_transport does not map the BAR space with the IOMMU. To fix this, we map the entire MW region for each QP after we assign the DMA channel. This prevents needing an extra DMA map in the fast path. Link: https://lore.kernel.org/linux-pci/499934e7-3734-1aee-37dd-b42a5d2a2608@intel.com/ Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-02-11NTB: ntb_transport: Free MWs in ntb_transport_link_cleanup()Joey Zhang1-0/+3
If NTB peer host crashes or reboots, the NTB transport link will be down and the MWs of NTB transport will be invalid. But the ntb_transport_link_cleanup() does not free these invalid MWs. When the NTB peer host is recovered later, NTB transport link will be up and the ntb_set_mw() will not reset up MWs. Because the MWs of NTB transport are invalid, the NTB transport will not work. We can fix it by freeing MWs when NTB transport link is down, then the ntb_set_mw() will reset up MWs when NTB transport link is up. Signed-off-by: Joey Zhang <joey.zhang@microchip.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-02-11ntb_hw_switchtec: Added support of >=4G memory windowsPaul Selles1-2/+7
Current Switchtec's BAR setup registers are limited to 32bits, corresponding to the maximum MW (memory window) size is <4G. Increase the MW sizes with the addition of the BAR Setup Extension Register for the upper 32bits of a 64bits MW size. This increases the MW range to between 4K and 2^63. Reported-by: Boris Glimcher <boris.glimcher@emc.com> Signed-off-by: Paul Selles <paul.selles@microchip.com> Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-02-11ntb_hw_switchtec: debug print 64bit aligned crosslink BAR NumbersPaul Selles1-1/+1
Switchtec NTB crosslink BARs are 64bit addressed but they are printed as 32bit addressed BARs. Fix debug log to increment the BAR numbers by 2 to reflect the 64bit address alignment. Fixes: 017525018202 ("ntb_hw_switchtec: Add initialization code for crosslink") Signed-off-by: Paul Selles <paul.selles@microchip.com> Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-01-28Merge 5.0-rc4 into char-misc-nextGreg Kroah-Hartman1-4/+4
We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22ntb: ntb_hw_switchtec: Cleanup 64bit IO defines to use the common headerLogan Gunthorpe1-32/+4
Clean up the ifdefs which conditionally defined the io{read|write}64 functions in favour of the new common io-64-nonatomic-lo-hi header. Per a nit from Andy Shevchenko, the include list is also made alphabetical. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22ntb: ntb_hw_intel: use io-64-nonatomic instead of in-driver hacksLogan Gunthorpe1-29/+1
Now that ioread64 and iowrite64 are available in io-64-nonatomic, we can remove the hack at the top of ntb_hw_intel.c and replace it with an include. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Acked-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-4/+4
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-11-01ntb: idt: Alter the driver info commentsSerge Semin3-9/+8
Since IDT PCIe-switch temperature sensor is now always available irregardless of the EEPROM/BIOS settings, Kconfig and in-code description should be properly altered. In addition lets update the driver copyright lines. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-11-01ntb: idt: Discard temperature sensor IRQ handlerSerge Semin2-43/+3
IDT PCIe-switch temperature sensor interface is very broken. First of all only a few combinations of TMPCTL threshold enable bits really cause the interrupts unmasked. Even if an individual bit indicates the event unmasked, corresponding IRQ just isn't generated. Most of the threshold enable bits combinations are in fact useless and non of them can help to create a fully functional alarm interface. So to speak, we can't create a well defined hwmon alarms based on the IDT PCI-switch threshold IRQs. Secondly a single threshold IRQ (not a combination of thresholds) can be successfully enabled without the issue described above. But in this case we experienced an enormous number of interrupts generated by the chip if the temperature got near the enabled threshold value. Filter adjustment didn't help much. It also doesn't provide a hysteresis settings. Due to the temperature sample fluctuations near the threshold the interrupts spate makes the system nearly unusable until the temperature value finally settled so being pushed either to be fully higher or lower the threshold. All of these issues makes the temperature sensor alarm interface useless and even at some point dangerous to be used in the driver. In this case it is safer to completely discard it and disable the temperature alarm interrupts. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-11-01ntb: idt: Add basic hwmon sysfs interfaceSerge Semin3-1/+206
IDT PCIe switches provide an embedded temperature sensor working within [0; 127.5]C with resolution of 0.5C. They also can generate a PCIe upstream interrupt in case if the temperature passes through specified thresholds. Since this thresholds interface is very broken the created hwmon-sysfs interface exposes only the next set of hwmon nodes: current input temperature, lowest and highest values measured, history resetting, value offset. HWmon alarm interface isn't provided. IDT PCIe switch also've got an ADC/filter settings of the sensor. This driver doesn't expose them to the hwmon-sysfs interface at the moment, except the offset node. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-11-01ntb: idt: Alter temperature read methodSerge Semin2-17/+152
In order to create a hwmon interface for the IDT PCIe-switch temperature sensor the already available reader method should be improved. Particularly we need to redesign it so one would be able to read temperature/offset values from registers of the passed types. Since IDT sensor interface provides temperature in unsigned format 0:7:1 (7 bits for real value and one for fraction) we also need to have helpers for the typical sysfs temperature data type conversion to and from this format. Even though the IDT PCIe-switch provided temperature offset got the same but signed type it can be translated by these methods too. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-10-31NTB: transport: Try harder to alloc an aligned MW bufferAaron Sierra1-23/+63
Be a little wasteful if the (likely CMA) message window buffer is not suitably aligned after our first attempt; allocate a buffer twice as big as we need and manually align our MW buffer within it. This was needed on Intel Broadwell DE platforms with intel_iommu=off Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-10-31ntb: ntb_transport: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1373888 ("Missing break in switch") Addresses-Coverity-ID: 1373889 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-10-31ntb: idt: Set PCIe bus address to BARLIMITxSerge Semin1-1/+1
IDT NTB driver sets the upper limit of actual translation address being written to the corresponding memory window setup. It is achieved by BARLIMITx register initialization. Needless to say, that the register works within PCIe bus address space. In general CPU and PCIe address spaces are different. It means, that addresses used for Memory TLPs routine can be different from CPU addresses. While in most of cases they are the same, there are exceptions when the proper mapping must be performed to have the portable driver code. There used to be a virt_to_bus()/bus_to_virt() interface for this purpose. But it's deprecated now. It was also a mistake to use pci_resource_start() since the return address of the method is at the CPU address space. In order to achieve the desired purpose we need to use pci_bus_address() helper. This method shall return a PCIe bus base address of the corresponding BAR resource. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-10-31NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checksGustavo A. R. Silva1-4/+4
Both devm_kcalloc() and devm_kzalloc() return NULL on error. They never return error pointers. The use of IS_ERR_OR_NULL is currently applied to the wrong context. Fix this by replacing IS_ERR_OR_NULL with regular NULL checks. Fixes: bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-10-31ntb: intel: fix return value for ndev_vec_mask()Dave Jiang1-1/+1
ndev_vec_mask() should be returning u64 mask value instead of int. Otherwise the mask value returned can be incorrect for larger vectors. Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Lucas Van <lucas.van@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-06-29switchtec: Use generic PCI Vendor ID and Class CodeDoug Meyer1-1/+2
Move the Microsemi Switchtec PCI Vendor ID (same as PCI_VENDOR_ID_PMC_Sierra) to pci_ids.h. Also, replace Microsemi class constants with the standard PCI definitions. Signed-off-by: Doug Meyer <dmeyer@gigaio.com> [bhelgaas: restore SPDX (I assume it was removed by mistake), remove device ID definitions] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: kzalloc_node() -> kcalloc_node()Kees Cook3-6/+6
The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This patch replaces cases of: kzalloc_node(a * b, gfp, node) with: kcalloc_node(a * b, gfp, node) as well as handling cases of: kzalloc_node(a * b * c, gfp, node) with: kzalloc_node(array3_size(a, b, c), gfp, node) as it's slightly less ugly than: kcalloc_node(array_size(a, b), c, gfp, node) This does, however, attempt to ignore constant size factors like: kzalloc_node(4 * 1024, gfp, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc_node + kcalloc_node ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc_node(sizeof(THING) * C2, ...) | kzalloc_node(sizeof(TYPE) * C2, ...) | kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node(C1 * C2, ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - (E1) * E2 + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11ntb: ntb_transport: Replace GFP_ATOMIC with GFP_KERNEL in ↵Jia-Ju Bai1-2/+2
ntb_transport_create_queue ntb_transport_create_queue() is never called in atomic context. ntb_transport_create_queue() is only called by ntb_netdev_probe(), which is set as ".probe" in struct ntb_transport_client. Despite never getting called from atomic context, ntb_transport_create_queue() calls kzalloc_node() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-06-11ntb: ntb_transport: Replace GFP_ATOMIC with GFP_KERNEL in ↵Jia-Ju Bai1-1/+1
ntb_transport_setup_qp_mw ntb_transport_setup_qp_mw() is never called in atomic context. ntb_transport_setup_qp_mw() is only called by ntb_transport_link_work(), which is set as a parameter of INIT_DELAYED_WORK() in ntb_transport_probe(). Despite never getting called from atomic context, ntb_transport_setup_qp_mw() calls kzalloc_node() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 02:30:40 +0000