summaryrefslogtreecommitdiffstats
path: root/drivers/nfc
AgeCommit message (Collapse)AuthorFilesLines
2017-04-17nfc: fix get_unaligned_...() misusesAl Viro2-4/+3
* if a local variable of type uint16_t is unaligned, your compiler is FUBAR * the whole point of get_unaligned_... is to avoid memcpy + ..._to_cpu(). Using it *after* memcpy() (into aligned object, no less) is pointless. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-17NFC: pn533: use constant off-stack buffer for sending acksMichał Mirosław2-3/+3
fix for WARN: usb 3-2.4.1: NFC: Exchanging data failed (error 0x13) llcp: nfc_llcp_recv: err -5 llcp: nfc_llcp_symm_timer: SYMM timeout ------------[ cut here ]------------ WARNING: CPU: 1 PID: 26397 at .../drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x370/0x550 transfer buffer not dma capable [...] Workqueue: events nfc_llcp_timeout_work [nfc] Call Trace: ? dump_stack+0x46/0x5a ? __warn+0xb9/0xe0 ? warn_slowpath_fmt+0x5a/0x80 ? usb_hcd_map_urb_for_dma+0x370/0x550 ? usb_hcd_submit_urb+0x2fb/0xa60 ? dequeue_entity+0x3f2/0xc30 ? pn533_usb_send_ack+0x5d/0x80 [pn533_usb] ? pn533_usb_abort_cmd+0x13/0x20 [pn533_usb] ? pn533_dep_link_down+0x32/0x70 [pn533] ? nfc_dep_link_down+0x87/0xd0 [nfc] [...] usb 3-2.4.1: NFC: Exchanging data failed (error 0x13) llcp: nfc_llcp_recv: err -5 llcp: nfc_llcp_symm_timer: SYMM timeout Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: trf7970a: Add device tree option of 1.8 Volt IO voltageGeoff Lansberry1-1/+25
The TRF7970A has configuration options for supporting hardware designs with 1.8 Volt or 3.3 Volt IO. This commit adds a device tree option, using a fixed regulator binding, for setting the io voltage to match the hardware configuration. If no option is supplied it defaults to 3.3 volt configuration. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Geoff Lansberry <geoff@kuvee.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: trf7970a: add device tree option for 27MHz clockGeoff Lansberry1-11/+39
The TRF7970A has configuration options to support hardware designs which use a 27.12MHz clock. This commit adds a device tree option 'clock-frequency' to support configuring the this chip for default 13.56MHz clock or the optional 27.12MHz clock. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Geoff Lansberry <geoff@kuvee.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: st21nfca: Use unified device property API meaningfullyAndy Shevchenko1-24/+5
Another place in the code that unveils non-tested at all ACPI case. Use unified device property API in meaningful way. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: st21nfca: Covert to use GPIO descriptorAndy Shevchenko1-27/+13
Since we got rid of platform data, the driver may use GPIO descriptor directly. Looking deeply to the use of the GPIO pin it looks like it should be a fixed voltage regulator rather than custom GPIO handling. But this is out of scope of the change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: st21nfca: Get rid of "interesting" use of interrupt polarityAndy Shevchenko1-6/+1
I2C framework followed by IRQ framework does set interrupt polarity correctly if it's properly specified in firmware (ACPI or DT). Get rid of the redundant trick when requesting interrupt. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: st21nfca: Get rid of platform dataAndy Shevchenko1-43/+3
Legacy platform data must go away. We are on the safe side here since there are no users of it in the kernel. If anyone by any odd reason needs it the GPIO lookup tables and built-in device properties at your service. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: st21nfca: Fix obvious typo when check error codeAndy Shevchenko1-2/+2
We return -ENODEV if ACPI provides a GPIO resource. Looks really wrong. If it has even been tested? Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: pn544: Get rid of code duplication in ->probe()Andy Shevchenko1-67/+17
Since OF and ACPI case almost the same get rid of code duplication by moving gpiod_get() calls directly to ->probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: pn544: Add GPIO ACPI mapping tableAndy Shevchenko1-4/+17
In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: pn544: Convert to use devm_request_threaded_irq()Andy Shevchenko1-11/+5
The error handling will be neat and short when using managed resources. Convert the driver to use devm_request_threaded_irq(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: pn544: Convert to use GPIO descriptorAndy Shevchenko1-93/+33
Since we got rid of platform data, the driver may use GPIO descriptor directly. This change fixes a potential issue of double freeing GPIOs in ACPI case by converting to devm_gpiod_get(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: pn544: Get rid of platform dataAndy Shevchenko1-37/+6
Legacy platform data must go away. We are on the safe side here since there are no users of it in the kernel. If anyone by any odd reason needs it the GPIO lookup tables and built-in device properties at your service. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02NFC: pn533: change order operations in dev registationAndrey Rusalin4-27/+48
Sometimes during probing and registration of pn533_i2c NULL pointer dereference happens. Reproduced in cycle of inserting and removing pn533_i2c and pn533 modules. Backtrace: [<8004205c>] (__queue_work) from [<80042324>] (queue_work_on+0x50/0x5c) r10:acdc7c80 r9:8006b330 r8:ac0dfb40 r7:ac50c600 r6:00000004 r5:acbbee40 r4:600f0113 [<800422d4>] (queue_work_on) from [<7f7d5b6c>] (pn533_recv_frame+0x158/0x1fc [pn533]) r7:ffffff87 r6:00000000 r5:acbbee40 r4:acbbee00 [<7f7d5a14>] (pn533_recv_frame [pn533]) from [<7f7df4b8>] (pn533_i2c_irq_thread_fn+0x184/0x) r6:acb2a000 r5:00000000 r4:acdc7b90 [<7f7df334>] (pn533_i2c_irq_thread_fn [pn533_i2c]) from [<8006b354>] (irq_thread_fn+0x24/0x) r7:00000000 r6:accde000 r5:ac0dfb40 r4:acdc7c80 ... Seems there is some race condition due registration of irq handler until all data stuctures that could be needed are ready. So I re-ordered some ops. After this, problem has gone. Changes in USB part was not tested, but it should not break anything. Signed-off-by: Andrey Rusalin <arusalin@dev.rtsoft.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02NFC: pn533: improve cmd queue handlingAndrey Rusalin1-13/+27
Make sure cmd is set before a frame is passed to the transport layer for sending. In addition pn533_send_async_complete checks if cmd is set before accessing its members. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Rework a little bit changes in pn532_send_async_complete. Signed-off-by: Andrey Rusalin <arusalin@dev.rtsoft.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02NFC: pn533: change order of free_irq and dev unregistrationAndrey Rusalin1-2/+2
Change order of free_irq and dev unregistration. It fixes situation when device already unregistered and an interrupt happens and nobody can handle it. Signed-off-by: Andrey Rusalin <arusalin@dev.rtsoft.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02nfc: fdp: fix NULL pointer dereferenceSudip Mukherjee1-3/+3
We are checking phy after dereferencing it. We can print the debug information after checking it. If phy is NULL then we will get a good stack trace to tell us that we are in this irq handler. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02NFC: Make EN2 pin optional in the TRF7970A driverGuan Ben1-12/+14
Make the EN2 pin optional. This is useful for boards, which have this pin fix wired, for example to ground. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02nfc: nxp-nci: use msleep for long delaysNicholas Mc Guire1-1/+1
ulseep_range() uses hrtimers and provides no advantage over msleep() for larger delays. For this large delay msleep() is preferable. Fixes: commit 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Link: http://lkml.org/lkml/2017/1/11/377 Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02NFC: st21nfca: Fix potential memory leakChristophe JAILLET1-6/+6
If all bits of 'dev_mask' are already set, there is a memory leak because 'info' should be freed before returning. While fixing it, 'return -ENOMEM' directly if the first kzalloc fails. This makes the code more readable. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02NFC: nfcmrvl: double free on error pathDan Carpenter1-3/+2
The nci_spi_send() function calls kfree_skb(skb) on both error and success so this extra kfree_skb() is a double free. Fixes: caf6e49bf6d0 ("NFC: nfcmrvl: add spi driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02nfc: st21nfca: Remove unneeded linux/miscdevice.h includeCorentin Labbe1-1/+0
drivers/nfc/st21nfca/i2c.c does not use any miscdevice, so this patch remove this unnecessary inclusion. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02nfc: pn544: Remove unneeded linux/miscdevice.h includeCorentin Labbe1-1/+0
drivers/nfc/pn544/i2c.c does not use any miscdevice, so this patch remove this unnecessary inclusion. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02nfc: nxp-nci: Remove unneeded linux/miscdevice.h includeCorentin Labbe1-1/+0
drivers/nfc/nxp-nci/i2c.c does not use any miscdevice, so this patch remove this unnecessary inclusion. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-01NFC: nxp-nci: Include unaligned.h instead of access_ok.hGuenter Roeck2-2/+2
Directly including access_ok.h can result in the following compile errors if an architecture such as ia64 does not support direct unaligned accesses. include/linux/unaligned/access_ok.h:7:19: error: redefinition of 'get_unaligned_le16' include/linux/unaligned/le_struct.h:6:19: note: previous definition of 'get_unaligned_le16' was here include/linux/unaligned/access_ok.h:12:19: error: redefinition of 'get_unaligned_le32' include/linux/unaligned/le_struct.h:11:19: note: previous definition of 'get_unaligned_le32' was here Include asm/unaligned.h instead and let the architecture decide which access functions to use. Cc: Clément Perrochaud <clement.perrochaud@effinnov.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-01NFC: nfcmrvl: Include unaligned.h instead of access_ok.hTobias Klauser1-1/+1
Including linux/unaligned/access_ok.h causes the allmodconfig build on ia64 (and maybe others) to fail with the following warnings: include/linux/unaligned/access_ok.h:7:19: error: redefinition of 'get_unaligned_le16' include/linux/unaligned/access_ok.h:12:19: error: redefinition of 'get_unaligned_le32' include/linux/unaligned/access_ok.h:17:19: error: redefinition of 'get_unaligned_le64' include/linux/unaligned/access_ok.h:22:19: error: redefinition of 'get_unaligned_be16' include/linux/unaligned/access_ok.h:27:19: error: redefinition of 'get_unaligned_be32' include/linux/unaligned/access_ok.h:32:19: error: redefinition of 'get_unaligned_be64' include/linux/unaligned/access_ok.h:37:20: error: redefinition of 'put_unaligned_le16' include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_le32' include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_le64' include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be16' include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be32' include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be64' Fix these by including asm/unaligned.h instead and leave it up to the architecture to decide how to implement unaligned accesses. Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support") Reported-by: kbuild test robot <fengguang.wu@intel.com> Link: https://lkml.org/lkml/2016/10/22/247 Cc: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-01NFC: nfcmrvl: drop duplicate header gpio.hGeliang Tang1-1/+0
Drop duplicate header gpio.h from nfcmrvl/spi.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-01NFC: remove TI nfcwilink driverRob Herring3-590/+0
It appears that TI WiLink devices including NFC (WL185x/WL189x) never shipped. The only information I found were announcements in Feb 2012 about the parts. There's been no activity on this driver besided common changes since initially added in Jan 2012. There's also no in users that instantiate the platform device (nor DT bindings). This is a first step in removing TI ST (shared transport) driver in favor of extending the BT hci_ll driver to support WL183x chips. Cc: Ilan Elias <ilane@ti.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-01nfc: Fix hangup of RC-S380* in port100_send_ack()OGAWA Hirofumi1-12/+23
If port100_send_ack() was called twice or more, it has race to hangup. port100_send_ack() port100_send_ack() init_completion() [...] dev->cmd_cancel = true /* this removes previous from completion */ init_completion() [...] dev->cmd_cancel = true wait_for_completion() /* never be waked up */ wait_for_completion() Like above race, this code is not assuming port100_send_ack() is called twice or more. To fix, this checks dev->cmd_cancel to know if prior cancel is in-flight or not. And never be remove prior task from completion by using reinit_completion(), so this guarantees to be waked up properly soon or later. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-01nfc: Fix RC-S380* needs zero-length packetOGAWA Hirofumi1-0/+1
If sent packet size is wMaxPacketSize boundary, this device doesn't answer. To fix this, we have to send zero-length packet in usb spec. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-01nfc: Add support RC-S380P to port100OGAWA Hirofumi1-3/+5
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-02-27scripts/spelling.txt: add "omited" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: omited||omitted omiting||omitting Link: http://lkml.kernel.org/r/1481573103-11329-26-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-17mei: bus: split RX and async notification callbacksAlexander Usyskin1-20/+16
Split callbacks for RX and async notification events on mei bus to eliminate synchronization problems and to open way for RX optimizations. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14Merge 4.9-rc5 into char-misc-nextGreg Kroah-Hartman1-1/+1
We want those fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-31mei: bus: fix received data size check in NFC fixupAlexander Usyskin1-1/+1
NFC version reply size checked against only header size, not against full message size. That may lead potentially to uninitialized memory access in version data. That leads to warnings when version data is accessed: drivers/misc/mei/bus-fixup.c: warning: '*((void *)&ver+11)' may be used uninitialized in this function [-Wuninitialized]: => 212:2 Reported in Build regressions/improvements in v4.9-rc3 https://lkml.org/lkml/2016/10/30/57 Fixes: 59fcd7c63abf (mei: nfc: Initial nfc implementation) Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28mei: bus: remove rx callback contextTomas Winkler1-3/+2
The callback context is redunant as all the information can be retrived from the device struture of its private data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28nfc: mei_phy: get phy from the driver dataTomas Winkler1-1/+4
In order to remove rather redundant context from the callback signature we the get nfc mei_phy from the driver's data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28nfc: mei: use module_mei_cl_driver macroTomas Winkler2-44/+2
Replace boilerplate driver registration with module_mei_cl_driver macro in pn544 and microread devices. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-20Merge tag 'nfc-next-4.8-1' of ↵David S. Miller6-353/+392
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.8 pull request This is the first NFC pull request for 4.8. We have: - A fairly large NFC digital stack patchset: * RTOX fixes. * Proper DEP RWT support. * ACK and NACK PDUs handling fixes, in both initiator and target modes. * A few memory leak fixes. - A conversion of the nfcsim driver to use the digital stack. The driver supports the DEP protocol in both NFC-A and NFC-F. - Error injection through debugfs for the nfcsim driver. - Improvements to the port100 driver for the Sony USB chipset, in particular to the command abort and cancellation code paths. - A few minor fixes for the pn533, trf7970a and fdp drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19NFC: nfcsim: Simulate lost frames through debugfs entryThierry Escande1-0/+12
This patch allows to simulate the lost of frames exchanged between the 2 nfcsim devices through a control entry in the debugfs and is used as follow: echo n > /sys/kernel/debug/nfcsim/nfcX/dropframe Where n specifies the number of frames to be dropped between 0 and 255 and nfcX is either nfc0 or nfc1, one of the two nfcsim devices. In the following example, the next frame that should be sent by the nfc0 device will be dropped and thus not received by the nfc1 device: echo 1 > /sys/kernel/debug/nfcsim/nfc0/dropframe The value of 0 can be used to reset the dropframe counter. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-19NFC: nfcsim: Add support for sysfs control entryThierry Escande1-0/+51
The idea is to have a way to control and/or modify the behavior of the nfcsim virtual devices. This patch creates a folder tree in the debug filesystem. The debugfs is usually mounted into /sys/kernel/debug and the nfcsim entries are located in DEBUGFS/nfcsim/nfcX/ where X is either 0 or 1 depending on the device you want to address. These folders are empty for now and control entries will be added by upcoming commits. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-17drivers: misc: ti-st: Use int instead of fuzzy char for callback statusGeert Uytterhoeven1-2/+2
On mips and parisc: drivers/bluetooth/btwilink.c: In function 'ti_st_open': drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow] hst->reg_status = -EINPROGRESS; drivers/nfc/nfcwilink.c: In function 'nfcwilink_open': drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow] drv->st_register_cb_status = -EINPROGRESS; There are actually two issues: 1. Whether "char" is signed or unsigned depends on the architecture. As the completion callback data is used to pass a (negative) error code, it should always be signed. 2. EINPROGRESS is 150 on mips, 245 on parisc. Hence -EINPROGRESS doesn't fit in a signed 8-bit number. Change the callback status from "char" to "int" to fix these. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-06NFC: nfcsim: Fix missing dependency on NFC_DIGITALThierry Escande1-0/+1
The nfcsim driver now depends on the Digital layer. This patch adds the missing dependency on NFC_DIGITAL for NFC_SIM config. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-06NFC: port100: Abort current command before switching RF offThierry Escande1-0/+4
If a command is still being processed by the device, the switch RF off command will be rejected. With this patch, the port100 driver calls port100_abort_cmd() before sending the switch RF off command. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-06NFC: port100: Make port100_abort_cmd() synchronousThierry Escande1-1/+10
This patch makes the abort_cmd function synchronous. This allows the caller to immediately send a new command after abort_cmd() returns. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-06NFC: port100: Fix the command cancellation processThierry Escande1-5/+37
The USB out_urb used to send commands to the device can be submitted through the standard command processing queue coming from the Digital Protocol layer but it can also be submitted from port100_abort_cmd(). To not submit the URB while already active, a mutex is now used to protect it and a cmd_cancel flag is used to not send command while canceling the previous one. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-06NFC: port100: Don't send a new command if one is still pendingThierry Escande1-0/+6
This patch ensures that a command is not still in process before sending a new one to the device. This can happen when neard is in constant polling mode: the configure_hw command can be sent when neard restarts polling after a LLCP SYMM timeout but before the device has returned in timeout from the last DEP frame sent. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-04NFC: nfcsim: Make use of the Digital layerThierry Escande1-354/+258
With this complete rewrite, the loopback nfcsim driver now relies on the Digital layer of the nfc stack. As with the previous version, 2 nfc devices are declared when the driver is initialized. The driver supports the NFC_DEP protocol in NFC-A and NFC-F technologies. The 2 devices are using a pair of virtual links for sk_buff exchange. The out-link of one device is the in-link of the other and conversely. To receive data, a device calls nfcsim_link_recv_skb() on its in-link and waits for incoming data on a wait queue. To send data, a device calls nfcsim_link_send_skb() on its out-link which stores the passed skb and signals its wait queue. If the peer device was in the nfcsim_link_recv_skb() call, it will be signaled and will be able to pass the received sk_buff up to the Digital layer. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-04NFC: port100: Explicitly set NFC-F framing for NFC-DEPThierry Escande1-1/+20
When setting the driver framing as NFC_DIGITAL_FRAMING_NFCF_NFC_DEP it used to be already configured as NFC_DIGITAL_FRAMING_NFCF which is the same. So this entry was empty in the in_protocols table. Now that the digital stack can handle PLS requests, it can be changed on the fly from NFC_DIGITAL_FRAMING_NFCA_NFC_DEP. This patch explicitly defines the framing configuration values for NFC_DIGITAL_FRAMING_NFCF_NFC_DEP. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 15:31:23 +0000