summaryrefslogtreecommitdiffstats
path: root/drivers/nfc/nxp-nci
AgeCommit message (Collapse)AuthorFilesLines
2017-11-06nfc: nxp-nci: constify i2c_device_idArvind Yadav1-1/+1
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-16networking: make skb_pull & friends return void pointersJohannes Berg1-2/+1
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg2-5/+3
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17nfc: fix get_unaligned_...() misusesAl Viro1-1/+1
* if a local variable of type uint16_t is unaligned, your compiler is FUBAR * the whole point of get_unaligned_... is to avoid memcpy + ..._to_cpu(). Using it *after* memcpy() (into aligned object, no less) is pointless. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02nfc: nxp-nci: use msleep for long delaysNicholas Mc Guire1-1/+1
ulseep_range() uses hrtimers and provides no advantage over msleep() for larger delays. For this large delay msleep() is preferable. Fixes: commit 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Link: http://lkml.org/lkml/2017/1/11/377 Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-02nfc: nxp-nci: Remove unneeded linux/miscdevice.h includeCorentin Labbe1-1/+0
drivers/nfc/nxp-nci/i2c.c does not use any miscdevice, so this patch remove this unnecessary inclusion. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-01NFC: nxp-nci: Include unaligned.h instead of access_ok.hGuenter Roeck2-2/+2
Directly including access_ok.h can result in the following compile errors if an architecture such as ia64 does not support direct unaligned accesses. include/linux/unaligned/access_ok.h:7:19: error: redefinition of 'get_unaligned_le16' include/linux/unaligned/le_struct.h:6:19: note: previous definition of 'get_unaligned_le16' was here include/linux/unaligned/access_ok.h:12:19: error: redefinition of 'get_unaligned_le32' include/linux/unaligned/le_struct.h:11:19: note: previous definition of 'get_unaligned_le32' was here Include asm/unaligned.h instead and let the architecture decide which access functions to use. Cc: Clément Perrochaud <clement.perrochaud@effinnov.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-05-01nfc: Drop owner assignment from i2c_driverKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: nxp-nci: Remove i2c client gpio irq configurationChristophe Ricard1-19/+2
gpio irq is already configured by the core i2c layers when reaching the probe function. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: nxp-nci: Remove #ifdef CONFIG_OFChristophe Ricard1-11/+0
All of_* APIs are safe if CONFIG_OF is not define. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-11-18nxp-nci: i2c: Do not check specifically for -EREMOTEIO errorFabio Estevam1-1/+1
Function nxp_nci_i2c_write currently assumes in case of I2C bus NACK that the NFC device is in stand-by mode and will retry the I2C transaction after a pause. This assumes that the first failed I2C transaction will wake-up the device. This is done by checking on EREMOTEIO, which is wrong. According to Documentation/i2c/fault-codes ENXIO shall be used. Unfortunately the NOACK return code is currently inconsistent across various I2C host controller drivers. So only check for the generic error case instead. This is a temporary fix. As soon as all I2C bus master drivers are fixed to consistently return 'ENXIO', then we can do the specific error check again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-19NFC: nxp-nci: constify nxp_nci_phy_ops structureJulia Lawall3-4/+6
The only instance of a nxp_nci_phy_ops structure is never modified. Thus the declaration of the structure and all references to the structure type can be made const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-07-06NFC: nxp-nci_i2c: use flags argument of devm_gpiod_get_indexUwe Kleine-König1-7/+3
Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Simplify driver accordingly which even makes error checking more correct because gpiod_direction_{in,out}put might fail. Furthermore this is one caller less that stops us making the flags argument to gpiod_get*() mandatory. Acked-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2015-06-09NFC: Remove obsolete setting of DEBUGValentin Rothberg1-2/+0
CONFIG_DYNAMIC_DEBUG is the right toggle to enable pr_debug(). Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-08NFC: nxp-nci: Fix build warningSamuel Ortiz1-0/+1
When GPIO is not enabled we hit this kind of warning: drivers/nfc/nxp-nci/i2c.c: In function 'nxp_nci_i2c_acpi_config': drivers/nfc/nxp-nci/i2c.c:320:2: error: implicit declaration of function 'devm_gpiod_get_index' [-Werror=implicit-function-declaration] gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2); This is fixed by explicitely including gpio/consumer.h. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-08NFC: nxp-nci_i2c: Add support for enumerating through ACPIOleg Zhurakivskyy1-0/+51
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-04-06NFC: nxp-nci: Release firmware when switching to FW mode failsSamuel Ortiz1-1/+3
In that case, the firmware work will never be scheduled, will never complete and thus the firmware will never be released. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-04-06NFC: nxp-nxi: Remove useless fw pointer checkSamuel Ortiz1-2/+1
It request_firmware returns 0, the request succeeded and the firmware pointer is valid. No need to check for it. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-26NFC: nxp-nci_i2c: Add I2C support to NXP NCI driverClément Perrochaud3-0/+429
Add a module to the NXP-NCI driver to support NFC controllers with an I2C control interface, such as the NPC100. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-26NFC: nxp-nci: Add support for NXP NCI chipsClément Perrochaud5-0/+621
Add support for NXP NCI NFC controllers such as the NPC100 or PN7150 families. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 07:59:24 +0000