summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2010-05-21sysfs: add struct file* to bin_attr callbacksChris Wright2-8/+15
This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21drivers/base: Convert dev->sem to mutexThomas Gleixner1-0/+1
The semaphore is semantically a mutex. Convert it to a real mutex and fix up a few places where code was relying on semaphore.h to be included by device.h, as well as the users of the trylock function, as that value is now reversed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds6-39/+35
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits) USB: remove unused usb_buffer_alloc and usb_buffer_free macros usb: musb: update gfp/slab.h includes USB: ftdi_sio: fix legacy SIO-device header USB: kl5usb105: reimplement using generic framework USB: kl5usb105: minor clean ups USB: kl5usb105: fix memory leak USB: io_ti: use kfifo to implement write buffering USB: io_ti: remove unsused private counter USB: ti_usb: use kfifo to implement write buffering USB: ir-usb: fix incorrect write-buffer length USB: aircable: fix incorrect write-buffer length USB: safe_serial: straighten out read processing USB: safe_serial: reimplement read using generic framework USB: safe_serial: reimplement write using generic framework usb-storage: always print quirks USB: usb-storage: trivial debug improvements USB: oti6858: use port write fifo USB: oti6858: use kfifo to implement write buffering USB: cypress_m8: use kfifo to implement write buffering USB: cypress_m8: remove unused drain define ... Fix up conflicts (due to usb_buffer_alloc/free renaming) in drivers/input/tablet/acecad.c drivers/input/tablet/kbtab.c drivers/input/tablet/wacom_sys.c drivers/media/video/gspca/gspca.c sound/usb/usbaudio.c
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds793-32480/+59842
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20USB: remove leftover references to udev->autosuspend_disabledAlan Stern1-1/+1
This patch (as1373) fixes a couple of drivers outside the USB subtree. Devices are now disabled or enabled for autosuspend by calling a core function instead of setting a flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: rename usb_buffer_alloc() and usb_buffer_free() usersDaniel Mack5-38/+34
For more clearance what the functions actually do, usb_buffer_alloc() is renamed to usb_alloc_coherent() usb_buffer_free() is renamed to usb_free_coherent() They should only be used in code which really needs DMA coherency. All call sites have been changed accordingly, except for staging drivers. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Pedro Ribeiro <pedrib@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds21-416/+82
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits) pcmcia: disable PCMCIA ioctl also for ARM drivers/staging/comedi: dev_node removal (quatech_daqp_cs) drivers/staging/comedi: dev_node removal (ni_mio_cs) drivers/staging/comedi: dev_node removal (ni_labpc_cs) drivers/staging/comedi: dev_node removal (ni_daq_dio24) drivers/staging/comedi: dev_node removal (ni_daq_700) drivers/staging/comedi: dev_node removal (das08_cs) drivers/staging/comedi: dev_node removal (cb_das16_cs) pata_pcmcia: get rid of extra indirection pcmcia: remove suspend-related comment from yenta_socket.c pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held pcmcia: remove pcmcia_add_device_lock pcmcia: update gfp/slab.h includes pcmcia: remove unused mem_op.h pcmcia: do not autoadd root PCI bus resources pcmcia: clarify alloc_io_space, move it to resource handlers pcmcia: move all pcmcia_resource_ops providers into one module pcmcia: move high level CIS access code to separate file pcmcia: dev_node removal (core) pcmcia: dev_node removal (remaining drivers) ...
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds3-17/+22
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: PM QOS update fix Freezer / cgroup freezer: Update stale locking comments PM / platform_bus: Allow runtime PM by default i2c: Fix bus-level power management callbacks PM QOS update PM / Hibernate: Fix block_io.c printk warning PM / Hibernate: Group swap ops PM / Hibernate: Move the first_sector out of swsusp_write PM / Hibernate: Separate block_io PM / Hibernate: Snapshot cleanup FS / libfs: Implement simple_write_to_buffer PM / Hibernate: document open(/dev/snapshot) side effects PM / Runtime: Add sysfs debug files PM: Improve device power management document PM: Update device power management document PM: Allow runtime_suspend methods to call pm_schedule_suspend() PM: pm_wakeup - switch to using bool
2010-05-18Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller4-0/+4
Conflicts: include/linux/mod_devicetable.h scripts/mod/file2alias.c
2010-05-18ixgbe: add support for active DA cablesDon Skidmore6-14/+54
This patch adds support of active DA cables. This is renaming and adding some PHY type enumerations. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: dcb, do not tag tc_prio_control framesJohn Fastabend1-1/+2
The network stack indicate packets should not be DCB tagged by setting the priority to TC_PRIO_CONTROL. One usage for this is lldp frames which are not suppossed to be tagged. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: fix ixgbe_tx_is_paused logicJohn Fastabend1-4/+4
The TFCS bits show the current XON state. Meaning that the device is paused if these bits are 0. This fixes the logic to work as it was intended. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: always enable vlan strip/insert when DCB is enabledYi Zou1-1/+9
when DCB mode is on, we want the HW VLAN stripping to be always enabled. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: remove some redundant code in setting FCoE FIP filterYi Zou1-6/+0
The ETQS setup for FIP out side the if..else is enough for the ETQS setup for FIP, so remove redundant code. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddpYi Zou1-4/+7
Make sure we point to the right offset of the fc_frame_header when VLAN header exists and HW has VLAN stripping disabled. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: fix header len when unsplit packet overflows to data bufferShannon Nelson1-2/+3
When in packet split mode, packet type is not recognized, and the packet is larger than the header size, the 82599 overflows the packet into the data area, but doesn't set the HDR_LEN field. We can safely assume the length is the current header size. This fixes an obscure corner case that can be triggered by non-ip packet headers or (more likely) by disabling the L2 packet recognition. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18cxgb4: notify upper drivers if the device is already up when they loadDimitris Michailidis1-0/+3
Upper layer drivers aren't notified that a device is ready if their modules load after the device becomes ready. Add the missing notification. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18cxgb4: keep interrupts available when the ports are brought downDimitris Michailidis2-28/+22
The PF driver needs to remain alert while its ports are down to service requests or errors from virtual functions or FW so keep interrupts and queues available when the ports are brought down. The change makes open_device_map unnecessary so remove it. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18cxgb4: fix initial addition of MAC addressDimitris Michailidis1-1/+1
The call to add the MAC address during link initialization wasn't adding the address to one of the HW tables. Fix. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18cnic: Return SPQ credit to bnx2x after ring setup and shutdown.Michael Chan2-1/+75
Everytime the iSCSI ring finishes setup or shutdown, we need to return the SPQ (slow path queue) credit to the bnx2x driver. Without this step, the SPQ will eventually be full causing iSCSI to fail. This can happen after 3 or 4 MTU changes for example. Add code to wait for these slow path commands to complete in the RX ring and return the SPQ credit to bnx2x. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18cnic: Convert cnic_local_flags to atomic ops.Michael Chan2-6/+5
It is easier to expand the flags for other purposes because it does not require a spin_lock. The next bug fix patch needs a flag in cnic_local_flags. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18can: Fix SJA1000 command register writes on SMP systemsOliver Hartkopp2-3/+18
The SJA1000 command register is concurrently written in the rx-path to free the receive buffer _and_ in the tx-path to start the transmission. The SJA1000 data sheet, 6.4.4 COMMAND REGISTER (CMR) states: "Between two commands at least one internal clock cycle is needed in order to proceed. The internal clock is half of the external oscillator frequency." On SMP systems the current implementation leads to a write stall in the tx-path, which can be solved by adding some general locking and some time to settle the write_reg() operation for the command register. Thanks to Klaus Hitschler for the original fix and detailed problem description. This patch applies on net-2.6 and (with some offsets) on net-next-2.6 . Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17ARCNET: Limit com20020 PCI ID matches for SOHARD cardsAndreas Bombe1-2/+2
The SH SOHARD ARCNET cards are implemented using generic PLX Technology PCI<->IOBus bridges. Subvendor and subdevice IDs were not specified, causing the driver to attach to any such bridge and likely crash the system by attempting to initialize an unrelated device. Fix by specifying subvendor and subdevice according to the values found in the PCI-ID Repository at http://pci-ids.ucw.cz/ . Cc: stable@kernel.org Signed-off-by: Andreas Bombe <aeb@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17cleanup: remove pppoe_ioctl() declaration.Rami Rosen1-1/+0
Hi, - This patch removes pppoe_ioctl() declaration in drivers/net/pppoe.c as it is unneeded. Regards, Rami Rosen Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net: Use kcalloc or kzallocJulia Lawall2-4/+2
Use kcalloc or kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y,flags; statement S; type T; @@ x = - kmalloc + kcalloc ( - y * sizeof(T), + y, sizeof(T), flags); if (x == NULL) S -memset(x, 0, y * sizeof(T)); @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net/vmxnet3: Use kzallocJulia Lawall1-2/+1
Use kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net: Use kzallocJulia Lawall1-2/+1
Use kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net: Add ndo_{set|get}_vf_port support for enic dynamic vnicsScott Feldman9-24/+521
Add enic ndo_{set|get}_vf_port ops to support setting/getting port-profile for enic dynamic devices. Enic dynamic devices are just like normal enic eth devices except dynamic enics require an extra configuration step to assign a port-profile identifier to the interface before the interface is useable. Once a port-profile is assigned, link comes up on the interface and is ready for I/O. The port-profile is used to configure the network port assigned to the interface. The network port configuration includes VLAN membership, QoS policies, and port security settings typical of a data center network. A dynamic enic initially has a zero-mac address. Before a port-profile is assigned, a valid non-zero unicast mac address should be assign to the dynamic enic interface. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
2010-05-17drivers/net: remove useless semicolonsJoe Perches23-33/+33
switch and while statements don't need semicolons at end of statement [ Fixup minor conflicts with recent wimax merge... -DaveM ] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17pegasus: fix USB device ID for ETX-US2Tadashi Abe1-1/+1
USB device ID definition for I-O Data ETX-US2 is wrong. Correct ID is 0x093a. Here's snippet from /proc/bus/usb/devices; T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04bb ProdID=093a Rev= 1.01 S: Manufacturer=I-O DATA DEVICE,INC. S: Product=I-O DATA ETX2-US2 S: SerialNumber=A26427 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=224mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=pegasus E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=125us This patch enables pegasus driver to work fine with ETX-US2. Signed-off-by: Tadashi Abe <tabe@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17can: sja1000 platform data fixesWolfgang Grandegger1-1/+2
The member "clock" of struct "sja1000_platform_data" is documented as "CAN bus oscillator frequency in Hz" but it's actually used as the CAN clock frequency, which is half of it. To avoid further confusion, this patch fixes it by renaming the member to "osc_freq". That way, also non mainline users will notice the change. The platform code for the relevant boards is updated accordingly. Furthermore, pre-defined values are now used for the members "ocr" and "cdr". Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17Merge branch 'for-davem' of ↵David S. Miller53-1434/+1966
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-05-17dm9000: fix "BUG: spinlock recursion"Baruch Siach1-11/+27
dm9000_set_rx_csum and dm9000_hash_table are called from atomic context (in dm9000_init_dm9000), and from non-atomic context (via ethtool_ops and net_device_ops respectively). This causes a spinlock recursion BUG. Fix this by renaming these functions to *_unlocked for the atomic context, and make the original functions locking wrappers for use in the non-atomic context. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net/usb: Use kmemdupJulia Lawall1-2/+1
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net/usb: Use kmemdupJulia Lawall2-5/+2
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net/usb: Use kmemdupJulia Lawall1-4/+2
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17fsl_pq_mdio: Fix mdiobus allocation handlingAnton Vorontsov1-2/+4
The driver could return success code even if mdiobus_alloc() failed. This patch fixes the issue. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17r6040: fix link checking with switchesFlorian Fainelli1-5/+3
The current link checking logic only works for one port, which is not correct for swiches were multiple ports can have different link status. As a result we would only check for link status on port 1 of the switch. Move the calls to mii_check_media in r6040_timer which will be polling a single PHY chip correctly and assume link is up for switches. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17gianfar: Remove legacy PM callbacksAnton Vorontsov1-14/+0
These callbacks were needed because dev_pm_ops support for OF platform devices was in the powerpc tree, and the patch that added dev_pm_ops for gianfar driver was in the netdev tree. Now that netdev and powerpc trees have merged into Linus' tree, we can remove the legacy hooks. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2x: avoid TX timeout when stopping deviceStanislaw Gruszka1-4/+2
When stop device call netif_carrier_off() just after disabling TX queue to avoid possibility of netdev watchdog warning and ->ndo_tx_timeout() invocation. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2: Use netif_carrier_off() to prevent timeout.Michael Chan1-9/+5
Based on original patch from Stanislaw Gruszka <sgruszka@redhat.com>. Using netif_carrier_off() is better than updating all the ->trans_start on all the tx queues. netif_carrier_off() needs to be called after bnx2_disable_int_sync() to guarantee no race conditions with the serdes timers that can modify the carrier state. If the chip or phy is reset, carrier will turn back on when we get the link interrupt. If there is no reset, we need to turn carrier back on in bnx2_netif_start(). Again, the phy_lock prevents race conditions with the serdes timers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2: Update 5709 MIPS firmware and version to 2.0.15.Michael Chan1-3/+3
New firmware fixes a performance regression on small packets. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2: Fix register printouts during NETEV_WATCHDOG.Eddie Wai2-3/+14
Dump the correct MCP registers and add EMAC_RX_STATUS register during NETDEV_WATCHDOG for debugging. Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: mark device state failAmit Kumar Salecha1-2/+8
Device state need to be mark as FAILED, if fail to start firmware. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: remove unused registerAmit Kumar Salecha4-21/+0
Removing register defines which are not used by Qlgoic CNA device. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: fix internal loopback testSucheta Chakraborty1-0/+2
Reset/set DEV_UP bit during allocation and deallocation of resources. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: module param for firmware load optionAmit Kumar Salecha1-1/+8
By default fw is loaded from flash, user can change this priority using load_fw_file module param. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: fix rx bytes statisticsSucheta Chakraborty1-1/+1
Added lrobytes to it. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: change adapter name displaySucheta Chakraborty1-1/+6
Append mac address to adapter name. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 14:53:18 +0000