summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-09-03net: dsa: bcm_sf2: recalculate switch clock rate based on portsFlorian Fainelli2-2/+68
Whenever a port gets enabled/disabled, recalcultate the required switch clock rate to make sure it always gets set to the expected rate targeting our switch use case. This is only done for the BCM7445 switch as there is no clocking profile available for BCM7278. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: dsa: bcm_sf2: request and handle clocksFlorian Fainelli2-2/+20
Fetch the corresponding clock resource and enable/disable it during suspend/resume if and only if we have no ports defined for Wake-on-LAN. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: systemport: Manage Wake-on-LAN clockFlorian Fainelli2-1/+10
It is necessary to manage the Wake-on-LAN clock to turn on the appropriate blocks for MPD or CFP-based packet matching to work otherwise we will not be able to reliably match packets during suspend. Reported-by: Blair Prescott <blair.prescott@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: systemport: fetch and use clock resourcesFlorian Fainelli2-1/+30
We disable clocks shortly after probing the device to save as much power as possible in case the interface is never used. When bcm_sysport_open() is invoked, clocks are enabled, and disabled in bcm_sysport_stop(). A similar scheme is applied to the suspend/resume functions. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03chelsio/chtls: CHELSIO_INLINE_CRYPTO should depend on CHELSIO_T4Geert Uytterhoeven1-2/+1
While CHELSIO_INLINE_CRYPTO is a guard symbol, and just enabling it does not cause any additional code to be compiled in, all configuration options protected by it depend on CONFIG_CHELSIO_T4. Hence it doesn't make much sense to bother the user with the guard symbol question when CONFIG_CHELSIO_T4 is disabled. Fix this by moving the dependency from the individual config options to the guard symbol. Fixes: 44fd1c1fd8219551 ("chelsio/chtls: separate chelsio tls driver from crypto driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: split xlg and gmac pcsRussell King1-55/+55
Split the XLG and GMAC PCS implementations and switch between them during the mac_prepare() method. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: convert to phylink pcs operationsRussell King2-116/+177
Convert mvpp2 to phylink's new pcs support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: move GMAC reset handling into mac_prepare()/mac_finish()Russell King1-32/+21
Move the GMAC reset handling into mac_prepare() / mac_finish() Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: ensure the port is forced down while changing modesRussell King1-11/+36
Ensure that the port is forced down while reconfiguring, controlling this via mac_prepare() and mac_finish() so that it is down while we are configuring our (future) PCS. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: convert to use mac_prepare()/mac_finish()Russell King1-11/+37
Convert mvpp2 to use the mac_prepare() and mac_finish() methods in preparation to converting mvpp2 to split-PCS support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: tidy up ACPI hackRussell King1-18/+18
Tidy up the ACPI hack so that we can minimise the function prototypes for this. This avoids adding further prototypes unnecessarily. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03mlxsw: core_hwmon: Extend hwmon interface with critical and emergency alarmsAmit Cohen1-1/+70
Add new attributes to hwmon object for exposing critical and emergency alarms. In case that current temperature is higher than emergency threshold, EMERGENCY alarm will be reported in sensors utility: $ sensors ... front panel 025: +55.0°C (crit = +35.0°C, emerg = +40.0°C) ALARM(EMERGENCY) In case that current temperature is higher than critical threshold, CRIT alarm will be reported in sensors utility: $ sensors ... front panel 025: +54.0°C (crit = +35.0°C, emerg = +80.0°C) ALARM(CRIT) Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03mlxsw: core_hwmon: Calculate MLXSW_HWMON_ATTR_COUNT more accuratelyAmit Cohen1-2/+11
Currently the value of MLXSW_HWMON_ATTR_COUNT is calculated not really accurate. Add several defines to make the calculation clearer and easier to change. Calculate the precise high bound of number of attributes that may be needed. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03mlxsw: core_hwmon: Split temperature querying from show functionsAmit Cohen1-16/+54
mlxsw_hwmon_module_temp_show(), mlxsw_hwmon_module_temp_critical_show() and mlxsw_hwmon_module_temp_emergency_show() query the relevant temperature from firmware and fill the value in provided buffers. Split the temperature querying functionality to individual get() functions and call them from the show() functions. The get() functions will be used by subsequent patches in the set. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: dsa: b53: Print err message on SW_RST timeoutPaul Barker1-1/+4
This allows us to differentiate between the possible failure modes of b53_switch_reset() by looking at the dmesg output. Signed-off-by: Paul Barker <pbarker@konsulko.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: dsa: b53: Use dev_{err,info} instead of pr_*Paul Barker1-5/+5
This change allows us to see which device the err or info messages are referring to if we have multiple b53 compatible devices on a board. As this removes the only pr_*() calls in this file we can drop the definition of pr_fmt(). Signed-off-by: Paul Barker <pbarker@konsulko.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: clarify boolean precedenceShannon Nelson1-2/+2
Add parenthesis to clarify a boolean usage. Pointed out in https://lore.kernel.org/lkml/202008060413.VgrMuqLJ%25lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: remove unused variableShannon Nelson1-2/+0
Remove a vestigial variable. Pointed out in https://lore.kernel.org/lkml/20200806143735.GA9232@xsang-OptiPlex-9020/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: clean adminq service routineShannon Nelson3-48/+25
The only thing calling ionic_napi any more is the adminq processing, so combine and simplify. Co-developed-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: clean up desc_info and cq_info structsShannon Nelson3-39/+8
Remove some unnecessary struct fields and related code. Co-developed-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: struct reorder for faster accessShannon Nelson2-16/+16
Move a few active struct fields to the front of the struct for a little better cache use and performance. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: clean up page handling codeShannon Nelson1-31/+40
The internal page handling can be cleaned up by passing our local page struct rather than dma addresses, and by putting more of the mgmt code into the alloc and free routines. Co-developed-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02net: dsa: rtl8366: Refactor VLAN/PVID initLinus Walleij2-131/+146
The VLANs and PVIDs on the RTL8366 utilizes a "member configuration" (MC) which is largely unexplained in the code. This set-up requires a special ordering: rtl8366_set_pvid() must be called first, followed by rtl8366_set_vlan(), else the MC will not be properly allocated. Relax this by factoring out the code obtaining an MC and reuse the helper in both rtl8366_set_pvid() and rtl8366_set_vlan() so we remove this strict ordering requirement. In the process, add some better comments and debug prints so people who read the code understand what is going on. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02net: dsa: rtl8366: Check validity of passed VLANsLinus Walleij1-0/+6
The rtl8366_set_vlan() and rtl8366_set_pvid() get invalid VLANs tossed at it, especially VLAN0, something the hardware and driver cannot handle. Check validity and bail out like we do in the other callbacks. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01octeontx2-pf: Add UDP segmentation offload supportSunil Goutham5-4/+124
Defines UDP segmentation algorithm in hardware and supports offloading UDP segmentation. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01net: dsa: mv88e6xxx: Fix W=1 warning with !CONFIG_OFAndrew Lunn1-9/+2
When building on platforms without device tree, e.g. amd64, W=1 gives a warning about mv88e6xxx_mdio_external_match being unused. Replace of_match_node() with of_device_is_compatible() to prevent this warning. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01dpaa2-eth: add a dpaa2_eth_ prefix to all functions in dpaa2-eth-dcb.cIoana Ciornei1-4/+4
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01dpaa2-eth: add a dpaa2_eth_ prefix to all functions in dpaa2-eth.cIoana Ciornei1-200/+200
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01dpaa2-eth: add a dpaa2_eth_ prefix to all functions in dpaa2-ethtool.cIoana Ciornei1-44/+45
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01ibmvnic: Harden device Command Response Queue handshakeThomas Falcon1-1/+18
In some cases, the device or firmware may be busy when the driver attempts to perform the CRQ initialization handshake. If the partner is busy, the hypervisor will return the H_CLOSED return code. The aim of this patch is that, if the device is not ready, to query the device a number of times, with a small wait time in between queries. If all initialization requests fail, the driver will remain in a dormant state, awaiting a signal from the device that it is ready for operation. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller36-389/+379
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-09-01 The following pull-request contains BPF updates for your *net-next* tree. There are two small conflicts when pulling, resolve as follows: 1) Merge conflict in tools/lib/bpf/libbpf.c between 88a82120282b ("libbpf: Factor out common ELF operations and improve logging") in bpf-next and 1e891e513e16 ("libbpf: Fix map index used in error message") in net-next. Resolve by taking the hunk in bpf-next: [...] scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx); data = elf_sec_data(obj, scn); if (!scn || !data) { pr_warn("elf: failed to get %s map definitions for %s\n", MAPS_ELF_SEC, obj->path); return -EINVAL; } [...] 2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between 9647c57b11e5 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for better performance") in bpf-next and e20f0dbf204f ("net/mlx5e: RX, Add a prefetch command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like: [...] xdp_set_data_meta_invalid(xdp); xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool); net_prefetch(xdp->data); [...] We've added 133 non-merge commits during the last 14 day(s) which contain a total of 246 files changed, 13832 insertions(+), 3105 deletions(-). The main changes are: 1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper for tracing to reliably access user memory, from Alexei Starovoitov. 2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau. 3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa. 4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson. 5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko. 6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh. 7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer. 8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song. 9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant. 10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee. 11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua. 12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski. 13) Various smaller cleanups and improvements all over the place. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01liquidio: Remove unneeded cast from memory allocationYueHaibing1-6/+3
Remove unneeded return value cast. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01net: sungem: Remove unneeded cast from memory allocationYueHaibing1-3/+2
Remove dma_alloc_coherent return value cast. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: dsa: ocelot: use the Lynx PCS helpers in Felix and SevilleIoana Ciornei5-404/+40
Use the helper functions introduced by the newly added Lynx PCS MDIO module in the Felix VSC9959 and Seville VSC9953. Instead of representing the PCS as a phy_device, a mdio_device structure will be passed to the Lynx module which is now actually implementing all the PCS configuration and status reporting. All code previously used for PCS monitoring and runtime configuration is removed and replaced will calls to the Lynx PCS operations. Tested on the following SERDES protocols of LS1028A: 0x7777 (2500Base-X), 0x85bb (QSGMII), 0x9999 (SGMII) and 0x13bb (USXGMII). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: phy: add Lynx PCS moduleIoana Ciornei3-0/+319
Add a Lynx PCS module which exposes the necessary operations to drive the PCS using phylink. The majority of the code is extracted from the Felix DSA driver, which will be also modified in a later patch, and exposed as a separate module for code reusability purposes. As such, this aims at feature and bug parity with the existing Felix DSA driver, and thus USXGMII, SGMII, QSGMII and 2500Base-X (only w/o in-band AN) are supported by the Lynx PCS module since these were also supported by Felix. The module can only be enabled by the drivers in need and not user selectable. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: phylink: consider QSGMII interface mode in phylink_mii_c22_pcs_get_stateIoana Ciornei1-0/+1
The same link partner advertisement word is used for both QSGMII and SGMII, thus treat both interface modes using the same phylink_decode_sgmii_word() function. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: phylink: add helper function to decode USXGMII wordIoana Ciornei1-0/+43
With the new addition of the USXGMII link partner ability constants we can now introduce a phylink helper that decodes the USXGMII word and populates the appropriate fields in the phylink_link_state structure based on them. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net/wan/fsl_ucc_hdlc: Add MODULE_DESCRIPTIONYueHaibing1-0/+1
Add missing MODULE_DESCRIPTION. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: hns: Remove unused macro AE_NAME_PORT_ID_IDXYueHaibing1-2/+0
There is no caller in tree. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: dl2k: Remove unused macro DRV_NAMEYueHaibing1-1/+0
There is no caller in tree any more. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: wan: slic_ds26522: Remove unused macro DRV_NAMEYueHaibing1-2/+0
There is no caller in tree any more. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: ethernet: ti: am65-cpts: fix i2083 genf (and estf) Reconfiguration IssueGrygorii Strashko1-1/+5
The new bit TX_GENF_CLR_EN has been added in AM65x SR2.0 to fix i2083 errata, which can be just set unconditionally for all SoCs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: return errors from efx_mcdi_set_id_led, and de-indirectEdward Cree6-12/+4
W=1 warnings indicated that 'rc' was unused in efx_mcdi_set_id_led(); change the function to return int instead of void and plumb the rc through the caller efx_ethtool_phys_id(). Since (post-Falcon) all sfc NICs use MCDI for this, there's no point in indirecting through a nic_type method, so remove that and just call efx_mcdi_set_id_led() directly. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: fix kernel-doc on struct efx_loopback_stateEdward Cree1-1/+1
Missing 'struct' keyword caused "cannot understand function prototype" warnings. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: fix unused-but-set-variable warning in efx_farch_filter_remove_safeEdward Cree1-2/+0
Thanks to some past refactor, 'spec' is not actually used in this function; the code using it moved to the callee efx_farch_filter_remove. Remove the variable to fix a W=1 warning. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: fix W=1 warnings in efx_farch_handle_rx_not_okEdward Cree1-5/+2
Some of these RX-event flags aren't used at all, so remove them. Others are used only #ifdef DEBUG to log a message; suppress the unused-var warnings #ifndef DEBUG with a void cast. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31gtp: relax alloc constraint when adding a pdpNicolas Dichtel1-5/+5
When a PDP context is added, the rtnl lock is held, thus no need to force a GFP_ATOMIC. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31gtp: remove useless rcu_read_lock()Nicolas Dichtel1-2/+0
The rtnl lock is taken just the line above, no need to take the rcu also. Fixes: 1788b8569f5d ("gtp: fix use-after-free in gtp_encap_destroy()") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: phylink: avoid oops during initialisationRussell King1-1/+3
If we intend to use PCS operations, mac_pcs_get_state() will not be implemented, so will be NULL. If we also intend to register the PCS operations in mac_prepare() or mac_config(), then this leads to an attempt to call NULL function pointer during phylink_start(). Avoid this, but we must report the link is down. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31hinic: add support to query function tableLuo bin5-1/+190
add debugfs node for querying function table, for example: cat /sys/kernel/debug/hinic/0000:15:00.0/func_table/valid Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-19 13:41:24 +0000